Sioux Tools 5978 User Manual

Model

5978

Form

Date

#

Z568

9-59/A

Operator Instructions

Includes - Foreseen Use, Work Stations, Putting Into Service,
Operating, Dismantling, Assembly and Safety Rules.

ManufacturerlSupplier

Sioux Tools

2901

Floyd Boulevard

P.O.

Box

Sioux City,

U.S.A.

Tel No.

RecommendedWorking
Maximum

Use

-

Safely

Use

'-

Safety

Use

-

Breathing

Use

-

Ear

Inc.

507

IA

51

71

2-252-0525

lasses

Boots

Masks

Protectors

102

Air Pressure

YES

YES
YES

Fax No. 71 2-252-4267

6.2

bar

90

PSI

6.2

bar

90

PSI

Always

Wear

Safety

@

Wear

Hearing

Protection

A

Ep

E3tposure

Important

Read these instructions carefully
servicing or repairing this tool. Keep these Instructions in asafe

..

. .

accessible place.

Product Type

118"

(3

rnrn)

Pencil

Air Die Grinder

before

Installing, operating,

54,000

Sycles

Per

Min.

-

Model No/Nos

Recommended Hose Bore

Size

-

Minimum

114

Ins

8MfM

Serial

No.

Recommended

Hose

Length

30

Ft

10

Max.

M

Safety

Die

-

Use accessories rated at least

-

Prolonged exposure to vibration may cause injury.

-Read all instructions before using this tool. All
operators must be fully trained in its use and aware
these safety rules.

-

Do not exceed the maximum working air pressure.

-

Use personal protection equipment as recommended.

-Use only compressed air at the recommended
conditions.

-If

immediately and arrange for service and repair. It it Is
not practical
the air supply to the tool and write or
have written a warning note and
attach it to the tool.

-

If tool is to be used with a balancer or
other suspension device, ensure that

the tool is firmly attached to the
suspension/support device.

-When operating the tool, always keep
the body and particularly the hands
away from the working attachment
fixed to

-The tool is not electrically insulated.
Never use the tool if there is any
chance of coming into contact with
live electricity.

rules

when

using

a

5978

Grinder

54,000

RPM.

the tool appears to malfunction, remove from use

10

remove tool from service, then shut

the

tool.

,

~ecommended Air Supply

with

Suffichl

To

Maintain

Working

EachTool Outlet

off

-

Always when using the tool, adopt a firmfooting and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work.

-Use only correct spare parts for maintenance and

of

~ecomhended

Pressure

Page No

repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only
by persons trained to do so.

-

Do not lock, tape, wire, etc. the 'OnIOff' valve
position.

-Always shut off the air supply to
air regulator to exhaust the air from the feed hose
before fitting, removing or adjusting the working

attachment

-

Before using thetool, make sure that a shut off device

Capacity

A>

1

Do

not overgrip.

fitted

Easy

Filter

System

to the tool.

Take

To

Reach

Lubricator

Air

And

From

be

carried out

in

'On'

the

tool and open the

Top

L&

Trap

Air

Toot

Spot

Water

-

To

Figure

*

1