Sintai Optical 1DX Quick Installation Manual

WLAN+BLE Module

MODEL ＮＯ:１ＤＸ

Quick Installation Guide

I. Installation steps

WLAN

1. First, install Murara Wireless+BLE combo Driver of EVM Board.

2. Make "RCT" folder in a root directory of the micro SD card.

3. Make "WlanTest.txt" file in the RCT folder.
(WLAN continuous transmission/receiving mode)

4. Insert MICRO SD CARD into EVM Board

5. Click the Power key, wait for 5 seconds entry test mode.

BLE

1. First, install Murara Wireless+BLE combo Driver of EVM Board.

2. Make "RCT" folder in a root directory of the micro SD card.

3. Make "

BTTest.txt" file in the RCT folde.

(Bluetooth Low Energy continuous transmission/receiving mode)

4. Insert MICRO SD CARD into EVM Board

5. Click the Power key, wait for 5 seconds entry test mode.

Power Key

II. DC/RF Characteristics

Supply Voltage

Storage Temperature -40~+85 degree C

VBA DC 3.3V from host

Supply Voltage

DC/RF Characteristics for IEEE802.11 b/g/n

Specification IEEE 802.11b, IEEE 802.11g, IEEE 802.11n,

VDDIO DC 3.3V from host

Data rate

DSSS/CCK：up to,
11Mbps

OFDM：up to 54Mbps OFDM：up to 65Mbps

Output Power Max 19 dBm Max 23 dBm Max 23 dBm

Operating Channel CH1~CH11

DC/RF Characteristics for Bluetooth(LE)

items Contents
Bluetooth specification (power class) V ersion 4.1(LE)
Channel frequency (spacing) 2402 to 2480 MHz (2MHz)
Number of RF Channel 40
Item / Condition Min Typ Max unit
Center Frequency 2402 - 2480 MHz
Channel Spacing - 2 - MHz
Number of RF channel - 40 - ­Output power - - 8 dBm

III. Antenna Information

Antenna NO. Brand Model

1
2

Walsin RFANT5220110A0T 2.66 2.4~2.4835GHz
Walsin RFPCA280815EMAB301 1.17 2.4~2.4835GHz PCB I-PEX

Antenna Net

Gain(dBi)

Frequency range

Antenna

Type

Monopole

(Chip

Antenna)

Connecter

Type

N/A