Page 1
Sewhandy
model 40k
Table of Contents | Back to Manual Index | Download Manual in PDF Format | Next Page
INSTRUCTION MANUAL
Page 2
Table of Contents
Sewhandy
model 40k
Main Parts
To Thread your Machine
To Sew a Fine Seam
To End Stitching in Fabric
Main Parts
The Right Tension
The Seam Guide
To Change Needle
To Oil your Machine
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 3
Sewhandy
model 40k
to Change Needle
When your needle becomes blunt
or bent, change it right away. Use
a small screwdriver, if necessary,
to loosen and tighten the screw.
Insert the new needle with the flat
side toward the left.
Before you begin, be sure that the
needle bar is up and the presser
foot in down.
10
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 4
Sewhandy
model 40k
the Seam Guide
This attachment will help you guide
the fabric. You will use it to make
straight seams and tucks and for
placing stitching evenly around
curved edges.
9
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 5
Sewhandy
model 40k
the Right Tension
A perfect seam is strong, flat and
smooth. To make a perfect seam
the tension on your thread must be
just right. Tension is adjusted by
turning the tension thumb nut.
If your stitching looks like this,
make it tighter by turning the
tension thumb nut to the right.
If your stitching looks like this,
make it looser by turning the
tension thumb nut to the left.
When your seam looks like this,
the tension is just right.
8
Page 6
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 7
To End Stitching in Fabric
Sewhandy
model 40k
continued...
Hold end of thread loop and cut
Pass the scissors under the
presser foot and pull thread loop to
thread close to end of stitching.
the left as far as it will go.
7
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 8
To End Stitching in Fabric
Sewhandy
model 40k
Sometimes you may need to end
your stitching in the fabric. It is a
good idea to finish tucks, pleats,
hems and circles of stitching this
Turn the hand wheel until the
needle is as high as it will go.
Raise the presser foot.
way.
6
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 9
To Sew a Fine Seam continued...
Sewhandy
model 40k
An easy way to end a seam is to
stitch right off the edge of the
fabric. Make a little chain about
one inch long. Cut in the middle.
To start your next seam, hold the
fabric edge against the front of the
presser foot and turn the hand
wheel. The fabric will "feed" under
the foot and you are on your way.
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
5
Page 10
Sewhandy
model 40k
to Sew a Fine Seam
A plain seam is made by stitching
two fabric edges together A seam
must be started stitched and ended
just so to be perfect This is how to
do it.
Place the fabric under the presser
foot. Lower the foot. Turn the hand
wheel with your right hand, and
use your left hand to guide the
fabric.
4
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 11
Sewhandy
model 40k
to Thread your Machine
Before you begin, be sure that the
presser foot is down and the
needle is up. The presser foot is
raised and lowered with the
presser bar lifter. The needle is
positioned by turning the hand
wheel in the direction of the arrow.
3
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page
Page 12
Sewhandy
model 40k
to Oil your Machine
Your sewing should be oiled
occasionally, the same as
mother's. Borrow her SINGER*
Sewing Machine Oil and apply one
drop to each place indicated.
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format
11
Loading...