Page 1
Porm
2I52w-Rev.
(750)
Printed
4-
inU.S.
A.
LIST
OF
PARTS
®CH\^
MACHINES
Nos.
THE
47w6l
SINGER
and
A
TRADE
MARK
MANUFACTURING
47w66
OF
COMPANY
Page 2
INSTRUCTIONS
To ensure easy running and prevent unnecessary wear
of the parts
requires
oiling
v/hlch
and
are
when
In
FOR
movable
OILING
contact, the machine
in continuous use,
"TYPE
B"
or "TYPE D" OIL, sold only by Singer Sewing Machine
Company, should be applied at least twice each day to
alloil holes
"TYPE
Use
"TYPE
marked
D"
"OIL", as instructed in Form 2220w.
OIL
is
stainless.
E"
Stainless
Thread
Lubricantinthe
thread
lubricator attached to the face plate of the Machine.
Copyright, U. S. A.,
by The Singer Manufacturing Co.
All Rights Reserved for all Countries
1939,
1940
and
1950
Page 3
ACCESSORIES
INDEX
PAGE
-
--
--
--
--
20
BINDERS -
BOBBIN WINDER -
FEED
DOGS
FOOT
LIFTER 21
A\ACHINE No. 47w6I 5
MACHINE
NUMERICAL LIST OF PARTS
PRESSER FEET -
THROAT PLATES -
No.
--
-
47w66
--
--
-- --
--
______
-----
--
--
--
--
-
22
20
--
-
23
26
13
27
24
Page 4
INSTRUCTIONS
FOR
ORDERING
FIRST
In ordering
column.
From
this list, use ONLY the PART number in the
The number stamped on a Sewing Machine Part is the number of
the Single
Part
onl.y, except when the part includes
Set
Screws, Clamping
Screws, Studs and Rollers Spun on. Small Wires riveted, or Parts soldered
together, etc., which it Is necessary to furnish in combination.
Every
combination
of parts sent out has its
specific
number
which,
although not stamped on Parts (except in above case), must be used
when ordering
Each number
the
combination.
always
indicates the SAME PART in whatever list it
appears, or for whatever Machine.
The letters after some of the numbers indicate
the
style of finish
only, as follows:
A.
Hardened, Polished, Nickel Plated and
B. Polished, Nickel Plated and Buffed.
C.
Hardened
Polished only.
D.
Soft, not polished.
E.
F.
Hardened
H.
Blued.
Nickel
J.
Merlized.
R.
X. Black
Hardened and Black Oxide, for Iron or
XC.
Plated
Oxide,
only.
and
Polished.
only.
for iron and
Steel.
Buffed.
Steel.
Y. Black Nickel Plated only.
These letters MUST BE USED when they appear in the list and
AFTER
In
1501to1800,
1801 to
2001to50000
the number, as in the list.
this
series
I to
1500,
20000!to201500
20I50Ito201800
2000,
201801 to
and
and
350001to351500
and
202000
202001to350000
and 351801 to
35150)to351800
352000
are
NumbersofMachine
are
Screw
Numbers.
are
Nut
Numbers.
are Roller Numbers.
Parts.
The figures in the second column refer only to the plate in which
the illustration of the part is shown and are
ordering.
Twoormore
such
partsisnot
Parts marked with an asterisk
numbers
overacut
indicate
visible In an Illustration.
(^)
are made at the factory.
NOT
TO BE USED in
that
the
difference
between
are furnished only when repairs
Page 5
LIST
OF
PARTS
FOR
COMPLETE
HIGH
No.
♦233757
203091
200278H
202248
203089
203090
/AACHINENo.
SPEED.
CYLINDER
Plate
17030
17030
17030
17030
17030
DROP
BED.
AAAXIMUM
FOR
LEATHER
Arm
" Cap
" "
" " "
" "
t> IT II II II
200079H
FEED.
MECHANICAL
STITCH8TO
with
202135
Screw
Spool
and
AND
Waaher
Holder
47w6I
THE
GLOVES.
Name
204296
ROLLER
OPENER.
INCH.
Base
PRESSER.
Page 6
No.
200585H
204296
200079H
203092
204235
200010E
202005
233691
240802
202244
200338C
207080
202244
200502H
200338C
235003
224200
200602C
200327C
202253
233692
200164B
224392
350431E
241561
200328C
200335C
*233693
233607
222404
200100D
213787
213890
203184
200262H
202622
200728B
203185
202618
200030H
221174
233643
233609
200580H
203470
Plate
17030
17030
17030
17030
17002
17002
17002
17030
17030
17030
17030
17030
17030
17030
17030
17002
17002
17002
17002
17002
17003
17003
17030
17030
17030
17030
17030
17053
17053
17053
17053
17053
17053
17053
17053
17053
17053
17053
17053
17053
17053
17053
17053
17052
PARTS
FOR
MACHINE
Arm
Cap
" " " "
Spool
" " " " "
Arm
Cap
and
Spool
203090,203091
Arm
Position
"
Screw
" "
"
Shaft
" "
(3)
Washer
with
Bushing
Pin
" " " "
(wick)
Arm
Shaft
" " "
Bushing
" •• " "
(wick)
Arm
Shaft
Shaft
Bushing
Screw
Bushing
Connection
Thumb
Arm
" "
" " " "
200327C,200602C
Arm
Shaft
Shaft
Shaft
Flange
Shaft
Shaft
Screw
Shaft
Wheel
in.
Wheel
(cylinder)
Connection
Screw
Connection
Connection
Connection
Connection
Oil
diam.)
Position
Arm
Screw
Arm
Spring
Arm
Plate
Arm
Plate
Arm
" " " "
Balance
2-3/4
200335C
Balance
" "
Bed
" " Cap
" " "
•• " "
"
"
"
" "
" "
" "
" "
"
" "
"
" "
Bobbin
*•
Base(4in.
Clamp
Hinge
Packing
Thumb
Washer
Hinge
Screw
Slide
(back)
Clamp
No. A7w6l
Name
Holder
Holder
and
(2)
(3)
224392
(front)
(2)
Packing
(disc)
Position
Set
with
End
high)
Screw
Washer
Screw
(6)
Plate
Base
Wire
two
and
(hack)
(back)
(front)
(front)
Belt
and
two
Belt
Belt
Belt
Belt
Belt
(wick)
Stop
(belt
with
Screw
201461C
Position
Screw
Cover
(back)
(front)
Screw
Screw
Hinge
Screw
complete,Nos.
200585H
350431E
with
202244
Oil
Packing
Set
Screw
with
202244
Oil
Packing
Oil
Packing
Set
Screw
Pulley
202253
Pulley
Pulley
Pulley
Timing
Timing
Screw
groove
200328C and
Screw
and
Pin
(2)
(4)
with
Set
213380
(2)
Page 7
No.
*233764
203648
*202056
203473
203474
233636
*233640
221147
203576
200110D
203578
203579
241674
241675
3504050
203214
2009840
2005940
203216
233765
241753
202135
200462H
233694
213298
350411C
200935P
201531E
213610
211943
350149E
221163
235082
233612
201408C
201525E
202301
202595
200607C
201408C
Plate
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17053
17053
17053
17051
17051
17051
17051
17051
17051
17051
17051
17051
17002
17002
17002
17002
17002
17002
17002
17002
PARTS
FOR
Bobbin
Screw
Bobbin
Bobbin
MACHINE
Case
II
It
n II
II
It
ft
II
II II
N
II
(1
II
11
It
tt
It
Case
tt
Case
No.
47w6l
Name
It
-
Latch
If
"
Pin
"
It
" ]
ft
ti
tr
II
It
" (
If
tt
« r
II
II
Plunger
"
Spring
Lever
"
Eccentric
" "
"
Fulcrum
" "
"
Slide
" "
Oiling
Tension
Pelt
" "
" " "
Spring
Washer
(cloth)
complete,NOS.200594C,
2009840,202056,203214,203216,203473,
203474,203648,233764,241674,241675
and
two
Plate
Bar
with
Oonnecting
Bar
Oonnecting
Bar
Oonnecting
Dog,for
Screw,for
Plates
Dog
Stop
Driving
Driving
Driving
Driving
Driving
Driving
Driving
Driving
3504050
with
Position
223801
Throat
Eccentric
Eccentric
235082
and
Eccentric
Hinge
Eccentric
Hinge
Eccentric
Plunger
Eccentric
Plunger
Eccentric
Plunger
Eccentric
Stop
201650H
Pin
Screw
213610
Link
Link
Link
use
Washer,for
Plates
with
201525E
Screw
Screw
Spring
Spring
Screw
Pace
" "
" " Thxunb
Peed
" "
3504110
Peed
" " " "
•I II II II II II
Nut
Peed
"
" • "
Throat
Peed
Platform
Peed
Bracket
Peed
Bracket
2014080
Peed
Bracket
Peed
Bracket
Peed
Bracket
Peed
Bracket
Peed
Bracket
Peed
Bracket
Position
with
Screw
Stud
Retainer
"
Regulating
and
with
Pinch
Screw
Stud
with
use
Regulating
Regulating
224200,two
Regulating
Regulating
Nut
Regulating
Regulating
Regulating
Stop
Regulating
Pin
203579
Screw
350432X0
two
Screw
Stud
Platform
with
each
Screw
Page 8
8
No.
201525E
200429P
200383C
235011
233614
201525E
235066
200346C
203244
2003930
235842
200919C
201522E
202277
200054E
210559
200378C
221164
200038C
233695
200447C
233696
200583H
200392C
233615
*202311
202443
202619
203061
200262H
233390
233361
200273D
*203482
237726
Plate
17002
17002
17002
17051
17051
17051
17051
17051
17051
17051
17002
17002
17002
17002
17002
17030
17030
17051
17051
17051
17051
17051
17051
17051
17030
17030
17030
17053
17053
17053
17053
17053
17052
PARTS
FOR
MACHINE
Feed
Driving
Bracket
Peed
Driving
Screw
Peed
Driving
Screw
Peed
Peed
Peed
Peed
Peed
Peed
Peed
Check
Driving
" " " "
II II II II II
" " "
•I
II II II II
Screw
Driving
two
200393C
Driving
Screw
Driving
with
200054E
Driving
Hinge
Screw
Driving
Hinge
Screw
Driving
Packing
Peed
Driving
Pinch
Peed
Peed
Peed
Peed
Peed
Peed
Screw
Driving
Stop
Collar
Driving
Stop
Collar
Driving
200038C
Driving
Screw
Lifting
200447C
Lifting
" " "
II
11
Eccentric
Stop
Eccentric
Eccentric
(wick)
No.
Name
Screw
Screw
Rock
Rock
Rock
Rock
and
Rock
Rock
Nut
Rock
Rock
Rock
with
Rock
Set
Rock
Rock
Cam
with
Cam
II ..
" • " "
"
Regulating
202443
Peed
II II II II
" " " "
Pin
Foot
" " " "
ft II II II II
Washer
Foot
and
Regulating
Lifter
Lifter
Spindle
202619
Spindle
Lifting
Lifting
Spring
Pbot
Spring
Hook
"
221148
Lifter
(sewing)
203482
Lifting
Screw
with
47w6l
Regulating
Nut
Regulating
Regulating
Shaft
Bearing
Bushing
Shaft
Collar
Shaft
Collar
Shaft
Connection
202277
Shaft
Connection
Shaft
Connection
Shaft
Connection
Shaft
Connection
Shaft
Connection
two
200370C
Shaft
Connection
Screw
Shaft
Crank
Shaft
Crank
200392C
Position
Retainer
Set
Screw
Screw
Screw
with
Head
Position
Lever
Hinge
Lever
Position
Lever
Position
201253P,201376C
ggt
with
Set
with
Pinch
and
202311,
Screw
Screw
and
Oil
Page 9
No.
233767
233697
200556H
233698
2003860
235015
235016
200346C
235017
2003460
235018
200398C
200382C
235019
233699
235021
200346C
213380
201461C
203244
200393C
235064
201254C
202253
235018
200398C
200382C
221148
201376C
201253P
233707
206758
233708
200541E
225837
233700
233637
Plate
17052
17052
17052
17003
17003
17003
17003
17003
17003
17003
17003
17003
17003
17051
17003
17003
17003
17003
17003
17003
17003
17003
17003
17003
17003
17003
17003
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
PARTS
FOR
ANACHINE No.
Hook
and
233765
Hook
II II II II
" "
" " "
"
" " " "
Bobbin
and
Bevel
Driving
237726
Gear
Pinion
Name
Case
Socket,18
with
Set
Coimter
(back)
Hook
(back)
Hook
Driving
Driving
Set
Counter
Screw
Counter
(front)
Hook
Driving
(front)
Hook
Driving
200382C
Hook
Driving
Position
Hook
Driving
Screw
Hook
Driving
(brass)
Hook
Driving
" " "
If II II II II
Screw
Hook
Driving
II
Position
Hook
Driving
two
Hook
Driving
Screw
Hook
Driving
Pulley
Hook
Driving
Pulley
Hook
Driving
Pulley
Hook
Driving
and
Hook
Driving
" " " "
"
Gib
" "
" "
"
Saddle
" "
" "
" "
" " "
Hook
Saddle
200556H,20357
233697,233707
Hook
Washer
221147
Counter
Set
Screw
Counter
and
200398C
Counter
Screw
Counter
Counter
Shaft
Shaft
" " "
Screw
Shaft
200393C
Shaft
Shaft
with
202253
Shaft
Set
Screw
Shaft
Spring
200398C
Hinge
Screw
Flange
Sheift
Shaft
Screw
with
Oil
Packing
Oiling
Screw
complete,Nob.200110D,
6,203578,233636,233637,
and
with
Bushing
206758
Washer
233640
47w6l
complete,No8.
teeth
Screw
two
Screw
Shaft
Bushing
Shaft
Shaft
Shaft
Shaft
Shaft
Shaft
Shaft
Bushing
Collar
Colleir
Connection
and
two
Connection
Connection
Gear
with
Gear
Position
Set
and
(wick)
Pelt
(2)
(2)
233767
and
2003860
Bushing
Bushing
Bushing
Gear
Gear
Gear
Oil
(back)
(front)
(front)
(front)
(front)
Belt
201254C
Belt
Belt
200382C
Screw
two
three
with
Set
Tube
get
with
Set
Screw
233708
Page 10
10
No.
233625
233626
200352C
238251
264718
200161D
202333
202254
200383C
200374C
264714
202277
200072C
202692 17007 " " Crank
203172
200428C
200335C
204250
200175D
200125F
208260
200363AL
208313
Plate
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17007
17050
17050
17050
PARTS
FOR
A\ACHINE
Needle
Needle
204250
Bar
Bar
with
Bushing
" " " Set
" "
" " " "
" " " " "
Screw
Needle
with
Needle
Packing
Needle
Screw
Needle
Screw
Needle
200072C
Needle
Packing
Needle
200383C,200428C
Needle
" " "
" " "
" "
" " " "
"
Presser
" " "
" "
Bar
202254
Bar
Bar
Bar
Bar
Bar
Bar
Bar
Set
Bar
and
Connecting
Connecting
Connecting
(wick)
Connecting
Connecting
Connecting
202277
Connecting
(wick)
Connecting
Crank
Thread
Screw
Bushing
Lifter
No.
47w6l
Name
200125F,200175D
Screw
Link
Oil
Link
Link
Link
Link
Stud
Stud
Stud
with
200335C,200374C,
and
202333
Friction
Position
Set
Guide
Set
Washer
Screw
Screw
Screw
Screw
200653C 17050 " " " Hinge Screw
244004 17050 " "
200260D
206608
202337
202338
200086F
200352C
202378
202346
17050
17050
17050
17050
17050
17050
17050
17050
Bracket
Presser
Bracket
Presser
Bracket
Presser
" " " "
with
Presser
Pinch
Presser
Screw
Presser
" " "
200492H 17050 " "
regulating)
200475H
244084
201928 17050
17050
17050
Presser
Screw
Presser
Screw
Roller
In.
50553C
Lifting
Bar
Lifting
Guide
Bar
Lifting
Spring
Bar
Position
200086F
Bar
Position
Screw
Bar
Position
Bar
Spring
Thumb
Bar
Thumb
Bar
Thumb
Packing
Presser,1-1/4
face
(fine)
and
twenty-four
Screw
Stop
Screw
Screw
Screw
(fibre)
with
Releasing
Releasing
Releasing
Guide
Lever
Guide
Guide
Rod
(pressure
Thumb
Thumb
In.
dlam.,3/l6
1528J,1766C,
16232
Stud
Stud
Stud
Stud
with
Oil
Pinch
Lever
Set
and
Guard
Guard
Oil
Set
Set
Lever
Lever
Lever
Set
Set
^
Screw
Page 11
No.
203426
203427
233807
235088
200117F
200362C
202558
202559
200141F
200096D
16232
1766C
202557
50553C
15281
233808
224372
202399
202277
202400
202423
200374C
202401
200132E
244048
244049
202404
244061
202407
263106
200625F
200061C
204925
201572H
244062
202410
241443
200132E
202412
202413
202414
202417
200355H
200397H
241755
241756
Plate
17050
17050
17050
17050
17050
17050
17050
17050
17050
17050
17050
17050
17050
17050
17050
17050
17007
17007
17007
17007
17007
17007
17050
17050
17054
17054
17050
17054
17054
17054
17054
17054
17054
17054
17054
17054
17054
17054
17030
17054
17054
17054
17054
17054
17053
17053
PARTS
FOR
Roller
Roller
Roller
Roller
II
•1
11
Collar
Collar
Collar
11
MACHINE
Presser
with
Presser
Position
Presser
Set
Presser
No.
47w6l
Name
Arm
" "
" "
203426
Bracket
" " "
2003620
Arm
Bracket
Screw
Arm
Bracket
Screw
Arm
" " "
Bracket
Stop
Roller
Roller
Roller
Stop
II
II
II
II
II
Presser
Screw
Presser
"
Ball,3/32
" "
"
Bar
"
Hinge
II II II
Presser
Arm
Arm
and
Bracket
Screw
Cone
(hollow)
Bar
200096D,200117F,202557
203427,233807,235088
Take-up
Take-up
n
II
Packing
II
Lever
"
Driving
•1
II II
(wick)
Lever
Hinge
" " "
(wick)
Take-up
Tension
Tension
Thread
Lever
II
II
II
II
II
II -
II
II
II
II
II
Hinge
"
Oiling
" " "
Disc
(back)
"
(front)
Release
Plunger
"
Washer
Spring
"
Washer
Stud
with
"
Set
"
Thumb
Screw
Washer
Nut
204925
complete,Nos.200625F,201572H,
202407,202410,244048,244049,244061
263106
and
:
11
II
II
II
II
It
II
II
II
N
Controller
Guide
Guide
Guide
Guide
"
" "
Lubricator
Spring
" "
" " "
(on
top
Set
Screw
Screw
Oil
" " "
in.
Screw
complete,Nos.
and
Stud
Stud
Stud
Pelt
Stop
of
Arm)
Pad
with
Position
Position
Position
Spring
Spring
Spring
diameter
Nut
to
202559,
two
with
Oil
with
Oil
Set
Screw
(felt)
Holder
11
201928
200141F
202277
202423
Packing
Screw
Screw
Page 12
12
No.
240439
241758
241759
350432X0
201650H
214838
241760
202091
202092
204058
200368H
204059
233801
200577AL
Plate
17053
17053
17053
17053
17053
17053
17053
17054
17054
17054
17054
17054
17051
17051
PARTS
FOR
/AACHINE
Thread
Lubricator
" " "
" " "
" "
It it II
" " "
Thread
Lubricator
240439,241755,241756,241758
241759
Thread
Retainer
" "
" "
" " "
Thread
Throat
Throat
202092
needle
Retainer
and
Plate,50
sizes
Plate
No.
47w6l
Name
Oil
Pad
Reservoir
Wick
Screw
Washer
complete,Nos.214838,
Sleeve
Spring
Stud
Set
complete,Nos.202091,
204058
needle
14
Screw
and
hole,for
15,for
(2)
Retainer
and
Screw
211943
SINGER
These
In
SINGER
Needles
are
Needles
and
marked
should
Machines.
their
Containers
with
the
be
used
Company's Trade Mark "SIMANCO.**" I
NeedlesinContainers
"FOR
SINGER MACHINES"
are
NOT
SINGER
marked
made
needles.
Page 13
LIST
OF
PARTS
FOR
13
COMPLETE
A\ACHINE
No.
47w66
HIGH SPEED. DROP FEED. ALTERNATING PRESSERS.
No.
*233690
203091
200278H
202248
203089
203090
200585H
204296
200079H
203092
204235
200010E
202005
233691
240802
202244
200338C
207080
202244
CYLINDER BED.
MAXIMUM
FOR
Plate
17030
17030
17030
17030
17030
17030
17030
17030
1,7030 Arm Cap
17002
17002
17002
17030
17030
17030
17030
17030
17030
MECHANICAL
STITCH8TO
LEATHER
Arm
Cap
" "
Screw
" " "
" "
Spool
" " " " "
with
Cap
200079H
Spool
Arm
" " " "
AND
Washer
Holder
THE
GLOVES.
Name
and
Holder
" " " " "
and
Spool
Nos.203090,203091
Arm
Position
"
Screw
" "
"
" "
Washer
Shaft
Bushing
(3)
with
Pin
Holder
(2)
(3)
224392
(hack)
" " " "
(wick)
Arm
Shaft
" " "
Bushing
(back)
(front)
" " " "
OPENER.
INCH.
Base
203089
204296
Base
Wire
Hinge
ai\d
two
and
with
Oil
Screw
complete,
350431E
Packing
Set
with
Oil
(wick)
200502H
200338C
235003
224200
2006020
200327C
202253
233692
17030
17030
17002
17002
17002
17002
17002
17003
Arm
Shaft
Thumb
Arm
" "
Shaft
Bushing
Screw
Bushing
Connection
(front)
(front)
" " " "
2003270,2006020
Arm
Shaft
Position
Arm
Shaft
Screw
Arm
Shaft
Spring
Arm
Shaft
Connection
Screw
Connection
Connection
Flange
Connection
and
Belt
two
Belt
Belt
Belt
Belt
Oil
Set
Pulley
202253
Pulley
Pulley
Pulley
Timing
Screw
200585H
202244
Screw
202244
Packing
Packing
Screw
with
Set
Plate
Page 14
14
200164B
224392
350431E
241561
200328C
200335C
*233693
233607
222404
200100D
213787
213890
203184
200262H
202622
200728B
203185
202618
200030H
221174
233643
233609
200580H
200459D
226071
203470
*233764
203648
*202056
203473
203474
233636
*233640
221147
203576
200110D
203578
203579
241674
241675
350405C
203214
200984C
200594C
203216
233765
233649
200462H
No.
Plate
17003
17030
17030
17030
17030
17030
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17056
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17056
17056
PARTS
FOR
/AACHINE
Arm
Shaft
Shaft
Connection
Screw
Oil
Plate
Arm
" " " "
Balance
Balance
Bed
Bed
2-3/4
200335C
" "
(cylinder)
213380
(cylinder)
Wheel
In.
Wheel
" " "
" "
" "
"
Base(4In.
(2)
Packing
(disc)
dlam.)
Position
Set
with
Cap
End
No.
Name
Screw
Position
Screw
high)
47w66
Belt
(wick)
Stop
(belt
with
Screw
2014610
Cover
" Clamp
" "
" "
" "
" "
"
" "
"
" " Clamp
" " " "
Screw
Bed
Screw
Bobbin
Screw
Bobbin
Bobbin
Hinge
Screw
Packing
Thumb
Washer
Washer
Screw
Hinge
Screw
(back)
(6)
Plate
(back)
Slide
(front)
" " "
Slide
Clamp
Washer
"
Case
" "
" " "
" " "
" "
" " "
" " " "
" " "
II M II
" "
" " " "
" " " " "
" "
Latch
" "
Pin
Plunger
Spring
Lever
Eccentric
Fulcrum
" " "
" "
Slide
Oiling
Tension
"
Plate
11
Pelt
Spring
Screw
(back)
(back)
with
Screw
Stud
Retainer
" " " "
Case
" "
Case
Tension
Washer
complete,Nos.200594C,
Spring
(cloth)
200984C,202056,203214,203216,203473,
203474,203648,233764,241674,241675
and
two
Plate
350405C
with
Thumb
201650H
Screw
Face
" "
Timing
Screw
groove
200328C
and
Pin
(2)
(4)
Thumb
Thumb
Position
203579
Screw
Regulating
Screw
•
and
350432XC
(2)
and
Pin
/
Page 15
No.
233694
213298
350411C
200935P
201531E
213610
212307
350149E
221163
235082
233612
2014080
201525E
202301
202595
2006070
2014080
201525E
200429F
2003830
235011
233614
201525E
235066
2003460
203244
2003930
235842
2009190
201522E
202277
200054E
Plate
17059
17059
17059
17059
17059
17059
17059
17059
17059
17002
17002
17002
17002
17002
17002
17002
17002
17002
17002
17002
17059
17059
17059
17059
17059
17059
17059
17002
17002
17002
17002
17002
PARTS
FOR
MACHINE
Feed
Bar
with
" "
350411C
Feed
Bar
" " " "
II II II M II
Nut
Feed
Bar
"
Dog,for
" "
Screw,for
Throat
Feed
Dog
Platform
Feed
Driving
Bracket
Feed
Driving
Bracket
201408C
Feed
Driving
Bracket
Feed
Driving
Bracket
Feed
Driving
Bracket
Feed
Driving
Bracket
Feed
Driving
Bracket
Feed
Driving
Bracket
Feed
Driving
Bracket
Feed
Driving
Screw
Feed
Driving
Screw
Feed
Check
Driving
No.
213610
Connecting
Connecting
Connecting
233701
Plates
Stop
Washer,for
Throat
Eccentric
Eccentric
235082
and
201525E
Eccentric
Hinge
Screw
Eccentric
Hinge
Screw
Eccentric
Plunger
Eccentric
Plunger
Eccentric
Plunger
Eccentric
Stop
Screw
Eccentric
Stop
Screw
Eccentric
Eccentric
Screw
Rock
" " " "
" " " "
II 11 11 11 11
Screw
Feed
Feed
Feed
Feed
Feed
Feed
Feed
two
Screw
with
Hinge
Hinge
Oil
Pinch
Driving
200393C
Driving
Driving
Driving
Driving
Driving
Packing
Driving
200054E
Screw
Screw
Screw
Rock
Rock
Rock
and
Rock
Rock
Nut
Rock
(wick)
Rock
47w66
Name
use
Plates
with
Spring
Spring
Shaft
Shaft
Shaft
Shaft
202277
Shaft
Shaft
Shaft
Shaft
Link
Link
Link
with
Regulating
Regulating
224200,two
Regulating
Regulating
Nut
Regulating
Regulating
Regulating
Regulating
Regulating
Nut
Regulating
Regulating
Bearing
Bushing
Collar
Collar
Connection
Connection
Connection
Connection
Connection
with
Pinch
Screw
Stud
Platform
use
Stop
two
with
Screw
Nut
Screw
Stud
Stud
each
with
Set
15
Page 16
16
No.
210559
200378C
221164
200038C
233695
200447C
233696
200583H
200392C
233615
*202311
202443
202619
203061
200262H
233390
233361
200273D
*203482
237726
233767
233697
200556H
233698
200386C
235015
235016
Plate
17030
17030
17059
17059
17059
17059
17059
17059
17059
17030
17030
17030
17056
17056
17056
17056
17056
17052
17052
17052
17052
17003
17003
17003
17003
PARTS
FOR
A\ACHINE
Peed
Driving
Stop
Feed
Feed
Feed
Feed
Peed
Feed
Foot
Collar
Driving
Stop
Collar
Driving
with
200038C
Driving
Screw
Lifting
200447C
Lifting
" " "
" " " "
" " "
"
Regulating
202443
" " " "
" " " "
Pin
and
Regulating
Lifter
" " " "
" " " " "
Washer
Ftoot
Lifter
Spring
Foot
Lifter
Spring
Hook
"
221148
Hook
233765
Hook
" " " "
" "
" "
"
Screw
(sewing)
203482
and
Bobbin
and
Bevel
Driving
Gear
Pinion
" " n n
(back)
200346C
235017
17003
17003
Hook
(back)
Hook
Driving
Set
Driving
(front)
200346C
235018
200398C
200382C
235019
17003
17003
17003
17003
17059
Hook
Hook
Hook
Hook
Hook
Driving
(front)
Driving
200382C
Driving
Position
Driving
Screw
Driving
Set
and
Screw
(brass)
233699
17003
Hook
Driving
235021 17003 " " "
No.
A7w66
Name
Rock
Shaft
with
two
Rock
Shaft
Set
Screw
Rock
Shaft
Rock
Shaft
Cam
with
Cam
Position
Retainer
Set
Spindle
202619
Spindle
Lifting
Lifting
Lifting
with
201253F,201376C
Case
237726
Socket,18
with
•*
Set
Counter
Counter
Screw
Coxinter
Counter
Screw
Counter
200398C
Counter
Counter
Counter
Shaft
Bushing
Connection
200378C
Connection
Crank
Crank
200392C
Screw
Screw
Screw
with
Head
Lever
Hinge
Lever
Position
Lever
Position
complete,Nos.
teeth
Screw
two
Screw
Shaft
Bushing
Shaft
Shaft
Shaft
Bushing
Shaft
Shaft
Shaft
Gear
Shaft
Oil
(back)
Pinch
and
202311,
Pin
Position
Screw
Screw
2003860
Bushing
Bushing
Gear
Gear
Tube
and
with
Set
\n
y
If
Page 17
•
No.
200346C
213380
201461C
203244
200393C
235064
201254C
202253
235018
200398C
200382C
221148
201376C
201253F
233707
206758
233708
200541E
225837
233700
233637
208545
233624
208547
201012C
200383C
200996C
204603
200074F
233647
233626
200352C
233642
264714
202277
200072C
233627
203172
200428C
200335C
Plate
17003
17003
17003
17003
17003
17003
17003
17003
17003
17003
17003
17052
17052
17052
17052
17052
17052
17052
17052
17052
17052
17058
17057
17057
17057
17057
17058
17058
17058
17057
17057
17057
17057
17057
17057
17057
17057
17057
17057
17057
PARTS
FOR
MACHINE
Hook
Driving
Set
Screw
Hook
Driving
" " " "
Position
Hook
Driving
with
Set
two
Driving
Screw
Driving
Hook
Hook
Pulley
Hook
Driving
Pulley
Hook
Driving
Pulley
Hook
Driving
and
200398C
Hook
Driving
" " "
Gib
"
Hinge
"
Screw
Saddle
"
"
"
Screw
200393C
with
Set
Spring
No.
Shaft
Shaft
Shaft
Shaft
Shaft
202253
Shaft
Screw
Shaft
Flange
Shaft
Shaft
Screw
with
Oil
Oiling
Screw
" "
Hook
Saddle
complete,Nos.200110D,
200556H,203576,203578,233636,
233637,233697,233707
Hook
Washer
221147
Lifting
" " "
II
Lifting
Position
Lifting
Screw
Lifting
"
" " "
Needle
233648
Needle
" " "
" "
" " "
and
Needle
Bell
Bell
Bell
Bell
Presser
Bar
Bar
202277
Bar
with
Crank
11
II II II
Crank
Screw
Crank
Crank
with
Bushing
Connecting
Connecting
(wick)
Needle
Needle
Bar
" "
200428C
Bar
" " "
" " "
Connecting
Crank
and
201012C
Crank
47w66
Name
Bushing
Bushing
Collar
Collar
(back)
(front)
(front)
(front)
(front)
Connection
and
two
Connection
Connection
Gear
with
Gear
Position
Set
206758
Packing
and
(wick)
Pelt
(2)
Washer
(2)
and
233640
Driving
and
Crank
Driving
Driving
Stop
Foot
200166F,200587D
with
Screw
Screw
Set
Screw
Link
stud
Stud
Stud
200335C,200383C,
Friction
Position
Set
Screw
with
Washer
Screw
Belt
201254C
Belt
Belt
200382C
Screw
two
233767
three
Crank
Crank
Oil
Pinch
17
Screw
233708
T.inlf
Set
and
200072C
Packing
Screw
Page 18
16
No.
233648
200587D
200166P
238246
233763
200363AL
202554
Plate
17057
17057
17057
17058
17058
17058
17058
PARTS
FOR
AAACHINE
Needle
Bar
" " " "
"
Set
Presser
" "
" " ' "
" "
Bar
Thread
Screw
(hollow)
Bushing
Lifter
No.
Name
Guide
47w66
with
Set
Screw
200074F
Screw
200653C 17058 " " " Hinge Screw
233628 17058 " "
200975P
200054E
233634
202338
200086P
2003520
233646
202346
17058
17058
17058
17058
17058
17058
17058
17058
200054E
Presser
Screw
Presser
Screw
Presser
" " " "
200086P
Presser
Pinch
Presser
" "
" " "
200492H 17058 " "
200475H
244084
17058
17058
regulating)
Presser
Screw
Presser
Screw
224372
17057
Take-up
208557 17057 " "
202277 17057 " " " "
202400
17057
(wick)
Take-up
202423 17057 " " " "
200383G
208558
200161H
208568
17057
17057
17057
17057
(wick)
Take-up
" "
and
Take-up
" " "
Bar
Bar
Bar
Bar
Screw
Bar
Bar
Bar
Packing
Lever
Lever
Lever
224572
Lever
Lifting
Lifting
Lifting
Position
Position
Position
Spring
Thumb
Thumb
Thvimb
Driving
Hinge
Hinge
Oil
Oil
Bracket
Bracket
Bracket
Stop
Screw
Screw
Screw
(fibre)
Stud
Stud
Guard
Guard
Leader
Guide
Guide
Guide
Rod
Stud
with
with
Guide
Pinch
Lever
Lever
Set
(pressure
Thumb
Thumb
with
Oil
with
Oil
Packing
Set
Screw
223655
Screw
with
Screw
Set
Set
202277
Packing
202423
202254 17057 " " " " Packing (wick)
223655 17057 " "
224572
244048
17057
17055
" " " "
Tension
244049 17055 " "
202404 17058 "
233629
17058
Release
" "
208560 17058 " " "
244061
202407
263106
200625P
200061C
204925
201572H
17055
17055
17055
17055
17055
17055
17055
" "
"
Spring
" "
"
Stud
" "
" "
"
Thumb
Disc
Oiling
(back)
(front)
Plunger
Slide
Washer
Washer
with
Set
Washer
Nut
Felt
Rivet
Spring
204925
Screw
Page 19
No.
244062
202410
241443
200132E
202412
202413
202414
202417
200355H
200368H
241755
241756
240439
241758
241759
350432X0
201650H
214838
241760
202091
202092
204058
200368H
204059
233701
200577AL
233630
233631
233632
200190D
200066D
204493
206707
200098F
203357
Plate
17055
17055
17055
170.55
17030
17055
17055
17055
17055
17055
17056
17056
17056
17056
17056
17056
17056
17056
17056
17055
17055
17055
17055
17055
17059
17059
17058
17058
17058
17058
17058
17058
17058
17058
17058
PARTS
FOR
Tension
MACHINE
complete,Nos.200625F,201572H,
No.
Name
202407,202410,244048,244049,244061
and
263106
Thread
Controller
•' " "
" " " •'
"
Guide
(on
Set
top
Screw
Screw
Oil
"
Guide
"
Guide
"
Guide
" "
" " "
"
Lubricator
" " " •'
" " "
" " "
" "
" " "
'• " "
Thread
Lubricator
Screw
240439,241755,241756,241758
241759
Thread
Thread
Throat
Throat
Vibrating
Retainer
" "
" " "
202092
sizes
"
Retainer
and
Plate,50
14
and
Plate
Presser
204058
Screw
Sleeve
Spring
Stud
complete,Nos.202091,
needle
15,for
Bar
*' " "
" " "
II II II It
Screw
Vibrating
Presser
Bar
" " "
Foot
47w66
Spring
Stop
Arm)
Pad
(felt)
Holder
Retainer
Reservoir
Wick
Nut
Washer
Screw
hole,for
212307
Screw
and
of
" "
complete,Nos.214838,
Set
(2)
Hinge
Bracket
Position
Screw
(2)
Stop
Stop
Spring
Screw
Washer
19
needle
Page 20
20
ACCESSORIES
FOR
MACHINE
NO.
A7w6l
No.
203470
202803
4822
228476
204033
128
227104
51078
6055
41401
120342
X 4
Plate
17052
17080
17060
17060
17060
16762
17060
17060
17060
17060
Bobbin
Presser
Roller
Screw
Wrench
Needles,two
Drip
Machine
Oiler
120343 17060 "
225498
225554
17060
17060
Screw
Wrench
(SWINGING
FOR S/i6 INCH ROUND
259428
259429
200113F
225453
225454
202277
259660
225455
225456
225368
200380C
225381
225444
200056E
225458
225459
225459
202478
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
Brake
Frame
Pulley
Spindle
Stop
(5)
Foot
Driver
Pan
wood
" "
"
(copper
Presser
screw
Bolt
Rest
(cast
Hinge
(Bobbin
each,sizes
iron,square)
1-1/2
(4)
Washer
Pin
plated)
Spout,3-1/2
Driver,7-1/4
(steel)
BOBBIN
WINDER
AUTOMATIC,
RIGHT
BELT
(leather)
" Clamp
" "
"
"
" "
"
" "
"
" "
" "
with
Hinge
Oil
Spring
with
Set
Latch
Screw
202277
Pin
Packing
Well
Plunger
200380C
Screw
Screw
Thumb
Washer
Lever
" " " "
" " " "
" "
Trip
Lever
Name
Screw
Case)
11,12
in.,No.l4,R.H.B.
(4)
(wood)
with
in.
long
in.
long
HAND)
DRIVE
and
259660
(wick)
Hinge
Joint
Nut
and
with
120343
Stud
Stud
Wrench
13
one
Page 21
No.
200299H
225461
200082D
228026
2102
13710
201499H
201572H
225462
259430
259431
Plate
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
16615
ACCESSORIES
Stop
Latch
Tension
Bracket
" "
" " "
"
Disc
"
Spring
"
Stud
" "
Bobbin
Bobbin
Universal
Winder
plete,
Nos.
two
2102
Winder
Base
200056E,200082D,200113P,200299H,
202478,225368,225381,225444,225453
to
259428
and
Bobbin
225456,225458,225462,228026,
to
wood
FOOT
LIFTER
Trip
Lever
with
Screw
Thumb
Tension
13710,
and
259430,two
screws
Name
Hinge
201499H
Washer
Nut
Bracket
201572H,
Tension
Winder
3/4
in.,No.l2,R.H.B.
each
Screw
com
225461
Bracket
complete,Nos.
225459
21
and
227952
227678 16762 " " "
227954
16762
16762
-
Foot
Foot
with
Lifter
202784
Lifter
Lever
Lever
with
Chain,48
Chain
227954
Hook
202784 16762 " " " " "
225016 16762 " " " Hinge
227939
227955
16762
16762
(Other
" " "
screws
Foot
Lifter
227678,227939
Foot
Lifter
of
machine
1
in.,No.12
Parts
Stand
Lever
and
are
head)
Pin
with
complete,Nos.225016,
227952
listed
FOR MACHINE NO. 47w66
Same
as
for
126
X 2
(4822
following
Wrench
used)
Needles,two
in
Machine
and
place
No.47w61
exceptions
202803
each,sizes
of
128
Presser
x 4
with
Foot
11,12
Needles
in.
the
long
(lower)
(upper)
two
with
not
and
wood
parts
13,
Page 22
22
No.
230251
259090
231263
230845
203077
200184B
230846
350472H
201525E
225708
230847
200099D
226015
231202
231203
231093
231094
200077D
200755D
201570D
230654
202491
259091
212220
204601
206707
233783
Plate
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17042
17061
17063
17058
17061
BINDERS
BINDER
FOR BINDING SHOES, ETC.
FOR
A\ACHINE
Binder
"
in
widths
steps
Binder
231203
Binder
" " " " Clamp
(I
Screw
Binder
II It « M II
Hinge
Binder
Hinge
Binder
Spring
Binder
201525E,203077,225708,230845,230846,
350472H
Binder
" Tape
It
Tape
Reel
" " "
202491
Tape
Reel
"
•' "
" " "
" " "
Binder
230251,230847,231094,231263,259090,
two
Peed
Dog,for
Lifting
Vibrating
Throat
sizes
Clamp
Head,for
of
1/32
Plate
and
Plate
11
Plate
Screw
Plate
Screw
Plate
Plate
and
Screw
II n
II »
Base
and
Base
11
Tension
and
Tape
each
200077D
Presser
Presser
Plate,50
14
and
NO.
A7w66
Name
Washer
tapes
from
7/32to3/4
in.
Slide
five
Slide
n n ti
Slide
Slide
Nut
Slide
Slide
two
Tension
with
231093
230654
Screw
n
11
Spring
Washer
Reel
233783
Foot
needle
15,for
or
with
226015
Stop
Stop
Stop
Stop
Stop
200184B
Pin
200755D
with
gtud
Adjusting
complete,Nos.
and
200099D
Foot
hole,for
212220
folded
strips
in.,in
231202,two
(adjustable)
Washer
Washer
Swing
Base
Base
Swing
Base
Swing
Base
complete,Nos.
201570D,
Thumb Nut
/f'
needle
Page 23
FOR
BINDING
AND STRAPS
BINDERS
BINDER
SLIPPERS,
WITH
% 'N.
FOR MACHINE NO.
PUMPS,
BINDING
47w66
23
SANDALS
No.
230251
231114
200190D
231115
259090
200099D
231116
231202
231203
Plate
17043
17043
17043
17043
17043
17043
17043
17043
17043
259092 17043
212220
204601
206707
233783
17061
17063
17056
17061
Binder
Clamp
"
Polder
binding,3/32
binding,1/8
Binder
Binder
Binder
Binder
Peed
Lifting
Vibrating
Throat
FOR
Polder
"
Guard
"
Head,for
binding
Head
"
Plate
two
231203
Tape
" " "
complete,for
binding,N03.230251,231114
231116,259090,two
200190D
Dog,for
Presser
Presser
Plate,50
sizes
14
and
FEED
MACHINE
DOGS
Washer
on
in.
Screw
Wire
Screw
Slide
Tension
233783
15,for
NO.
Name
Shank,for
in.
fold
fold
7/32
with
Poot
Poot
needle
47w6l
5/16
or
3/8
or
1/4
in.
231202
Pin
Pin
5/16or3/6
200099D
hole,for
212220
to
each
in.
in.
and
in.
and
needle
211407
211943
212220
212221
212307
17061
17051
17061
17061
17059
" " "
FOR
Peed
" " "
n n "
Dog,for
MACHINE
Dog,for
233801
233801
NO.
233783
233783
233701
A7w66
and
and
and
233784
233784
233702
Peed
Page 24
24
No.
204595
204601
204602
204603
204604
204605
204606
204607
204609
204610
204611
204612
204640
206662
206664
206574
206694
206695
206696
206697
206702
229625
Plate
17063
17063
17048
17058
17047
17047
17063
17063
17046
17063
17062
17062
17062
17046
17046
17047
17048
17062
17062
17062
17046
17062
FOR
Lifting
PRESSER
MACHINE
FEET
NO.
Presser
" " " "
206716
Lifting
Lifting
Lifting
Lifting
Lifting
Lifting
Lifting
Presser
206673,206707
Presser
206673,206707
Presser
206675,206678,206714
Presser
206675,206678,206714
Presser
206699
and
206700
Presser
206716
Presser
206673,206681,206707
206717
Lifting
Lift
and
in,?
Presser
206700
Presser
204634,206698,206705,206706
229620
Lifting
Presser
204634,206698,206705,206706
229620
Lifting
Lifting
Lifting
Lifting
Lifting
Lifting
Presser
204634,206698
Presser
for
206665
Presser
needle
for
for
206719
and
hole,for
206665
Presser
206668,206675,206678,206714
Presser
206693
Presser
204534,206698
Lifting
Lifting
Lifting
Lifting
Presser
for
204620,204634,206698
Presser
204634,206698,206701
Presser
206704
Presser
204634,206698,206705,206706
229620
A7w66
Name
Foot,for
Foot,for
and
206715
Foot,for
and
206715
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,
Foot,for
Foot,for
and
Foot,46
Foot
heavy
Foot,40
Foot,for
Foot,for
and
Foot,46
Foot,for
Foot,for
Foot,for
and
and
and
for
229620
needle
(grooved)
cord
needle
229620
needle
and
204620
206707
206672,
206672,
205668,
206668,
to
to
206719
206719
and
205717
206717
206676,
206707
and
206672,
206715
206676,206699
204620,
and
204620,
and
204620,
hole,
46
covering,
hole,
204621,206692
204620,
hole,
and
229620
204620,
229520
206703
204620,
and
and
to
and
Page 25
PRESSER
FEET
25
No.
229626
229628
229629
229633
231276
204620
204621
204634
206663
206665
206668
206672
206673
206675
206676
206678
206681
206691
206692
206693
206698
206699
206700
206701
206703
206704
206705
f
206706
206707
206714
Plate
17082
17048
17046
17048
17063
17062
17048
17062
17046
17046
17047
17046
17046
17047
17063
17047
17046
17046
17048
17048
17062
17063
17063
17062
17046
17046
17062
17062
17058
17047
206693
229626
Name
Foot,for
and
Foot,for
Foot,for
Foot,for
and
Foot,53
and
Lifting
Lifting
Lifting
Lifting
Lifting
Vibrating
Vibrating
Vibrating
Vibrating
Presser
204634,206698
Presser
206692
229630
206673,206707
for
204611,204612,204640,206695
206697,229625
229628
204612,204640,206695
229625
Presser
Presser
Presser
231277
and
Presser
Presser
Presser
and
Presser
" " " "
" " " "
204605
Vibrating
204603,204609
Vibrating
204603,204609
Vibrating
204605
Vibrating
204610
Vibrating
204605
Vibrating
and
Presser
Presser
Presser
and
Presser
Presser
and
Presser
206674
and
and
206674
206674
" " " "
" " " "
229628
Vibrating
229628
Vibrating
204612,204640,206695
229625
Vibrating
204610
Vibrating
204610
Vibrating
slippers,for
Vibrating
Presser
Presser
and
fresser
Presser
Presser
Presser
229626
206697
" " " "
" " " "
204612
Vibrating
204612
Vibrating
204603,204607,204609
Vibrating
204605
and
Presser
and
Presser
Presser
and
229625
229625
206674
229620
206715
Foot,for
229626
Foot,for
Foot,for
Foot,for
Foot,for
229633
Foot,for
229633
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
204620,
204621,
206691
206672,
Needle
to
to
and
to
204595,
206694
204611,
206697,
206662
206664
204604,
204602,
204602,
204604,
204606
204604,
204609
229629
206694
206694
204611,
206697,
204606
204606
binding
206702
206702
204611,
204611,
204601
229633
204604,
and
206717
hole,
to
and
and
and
and
and
and
to
Page 26
26
No.
206715
206716
206717
206719
229620
229630
231277
Plate
17046
17046
17046
17047
17062
17046
17063
PRESSER
Vibrating
204603,204609
Vibrating
204603,204607,204609
Vibrating
204603,204609
Vibrating
204605
Vibrating
204612,204640,206695
229625
Vibrating
Presser
Presser
Presser
Presser
and
206674
Presser
and
Presser
" " " "
FEET
229626
Name
Foot,for
and
Fbot,for
Foot,for
and
Foot,for
Foot,for
Foot,for
229633
and
229633
to
204602,
204601
229633
204602,
204604,
204611,
206697,
229629
231276
to
233801
233701
17051
17059
233702 17059
233783
233784
17061
17061
THROAT
FOR
MACHINE
Throat
sizes
211943
FOR
yWACHINE
Throat
sizes
Throat
sizes
Throat
sizes
212221
Throat
sizes
212221
PLATES
Plate,50
14
and
Plate,50
14
and
Plate,46
16
and
Plate,50
14
and
Plate,46
16
and
NO.
NO.
47w6l
needle
15,for
47w66
needle
15,for
needle
18,for
needle
15,for
needle
18,for
hole,for
211407
hole,for
212307
hole,for
212307
hole,for
212220
hole,for
212220
needle
and
needle
needle
needle
and
needle
and
Page 27
J'
NUMERICAL
LIST
OF
PARTS
Page 28
y-.
Hi
>
".i'
'''
r.'
'{m-
'W
•
•^X
i'.
'*,^f
C
.A
::
V . *. r
C ^ • \ n
Page 29
27
NUMERICAL
No.
1528J
1766C
2102
4822
6055
13710 16615
16232
41401
50553C
51078
120342
120343
200010E
200030H
200038C
200054E
^00054E
200056E
*
2000610
200066D
200072C
200074F
200077D
200079H
200082D
200086F
200096D
200098P
"•
200099D
200099D
200100D
200110D
Plate
17050
17050
16615
17060
17060
17050
17060
17050
17060
17060
17060
17002
17053
17051
17002
17058
16615
17054
17058
17007
17058
17042
17030
16615
17050
17050
17058
17043
17042
17053
17052
Roller
201928
Roller
Bobbin
Roller
for
Machine
Bobbin
225462
Roller
for
Machine
Roller
Machine
Oiler
"
Arm
Bed
Peed
Screw,for
Peed
Pinch
Presser
Screw,for
Bobbin
259431
Tension
Vibrating
Machine
Needle
Screw,for
Lifting
Tape
Arm
for
Bobbin
for
Presser
Pinch
Roller
Vibrating
Machine
Binder
Bed
Bobbin
233700
Presser
Presser
Winder
Presser
Machine
Bolt
Winder
Presser
201928
Rest
Presser
Bolt
(copper
Spout,3-1/2
Screw
Hinge
Driving
Driving
Screw,for
Bar
Winder
Stud
Bar
Presser
Reel
Cap
Spool
203090
Winder
259431
Bar
Screw,for
Presser
Head
"
Screw,for
(cylinder)
Case
LIST
Tension
No.47w61
Washer
Tension
Pin
plated)
Screw
Rook
221164
Rock
Lifting
233628
Stop
Set
Presser
No.47w66
Connecting
264714
Base
Holder
Tension
Position
Presser
No.47w68
Screw,for
Lever
OF
Name
Hinge
Ball
Hinge
Ball,
(wood)
Hinge
In.
Shaft
Shaft
235842
Latch
Screw
Bar
Foot
Screw,for
202338
Arm
Screw,for
Foot
259091
Cap
Fulcrum
PARTS
Screw
Cone,for
Disc,for
Screw
Spring,for
3/32
Screw,for
with
long,for
Bracket
Screw,for
Stud
Screw,for
Wire
Bracket
Guide
Screw,for
259092
Screw
Nut,for
201928
Nut
in.
diam.,
120343
120342
Crank
Pinch
Connection
Pinch
Screw,for
Pinch
259091
Hinge
Screw,
Lever
233808
Screw,for
225462
Wrench,
201928
238246
Screw,
Page 30
28
No.
200113P
200117F
200125F
200132E
200132E
200141F
200161D
200161H
200164B
200166F
200175D
200184B
200190D
200190D
200260D
200262H
200262H
200273D
200278H
200299H
200327C
2003280
200335C
200335C
200338C
200338C
200346C
200346C
200346C
200346C
200352C
200352C
200355H
200362C
200363AL
Plate
16615
17050
17007
17050
17054
17050
17007
17057
17003
17057
17007
17042
17043
17058
17050
17053
17053
17053
17030
16615
17002
17030
17030
17007
17030
17030
17051
17003
17003
17003
17007
17050
17054
17050
17050
NUMERICAL
Bobbin
259431
Roller
Collar
Needle
Take-up
Machine
Thread
Roller
Stop
Needle
Screw,for
Take-up
Machine
Arm
Plate
Needle
Needle
233625
Binder
Screw,for
Binder
Vibrating
Screw,for
Presser
Bracket
47w61
Bed
Foot
Winder
Presser
Set
Lever
Controller
Presser
Screw,for
Bar
Lever
Shaft
Screw
Set
Bar
Plate
Folder
Bar
Clamp
Lifter
LISTOFPARTS
Brake
Position
Screw,for
Oiling
No.47w61
Connecting
Machine
Oil
No.47w66
Connection
Screw,for
Thread
Slide
230847
Screw,for
Presser
Machine
Lifting
Guide
Hinge
Lifting
" " " "
Spring
Arm
Bobbin
Hinge
Arm
Screw,for
Balance
241561
Balance
Needle
and
Arm
Cap
Shaft
233627
Shaft
Screw
Screw
Winder
Screw,for
Connection
Wheel
Wheel
Bar
Bushing
Stop
224200
Position
Set
Crank
" " "
Feed
Screw
Hook
(back)
Hook
(front)
Hook
Screw
Needle
Presser
Thread
Roller
Collar
Presser
Driving
Driving
Driving
Driving
Set
Bar
Bar
Guide
Presser
Set
Bar
Set
Bushing
Position
Bushing
Rock
Counter
Screw
Counter
Screw
Shaft
Set
Screw,for
Name
Arm
Screw,for
Spring
Arm
233808
Guard
Guide
Bar
Screw,for
Screw
259431
Screw
Set
(back)
(front)
Shaft
Screw
Arm
Clamp
Bracket
233625
Felt
Bracket
Link
No.47w61
Belt
233647
Stop
Position
No.47w66
Releasing
Lever
Latch
Belt
Screw,for
Screw,for
Shaft
Shaft
Bushing
Set
Screw
Guide
Bracket
235088
Set
Screw,for
Position
Screw,for
Stop
Spring
Oil
Screw,for
Timing
Screw,for
Clamp
259092
Machine
Hinge
Position
Trip
Pulley
,for
Set
Set
Bushing
Bushing
Bushing
(back)
Set
Position
Screw
233808
Screw
Guard
Washer
Stop
Lever
No.
Screw
Lever
Set
241561
202692
Screw
Screw
Set
Set
Screw
Page 31
No.
200368H
200368H
200374C
200374C
200378C
200380C
200382C
200382C
200383C
200383C
200383C
200383C
200386C
200392C
200393C
200393,C
200397H
200398C
200398C
200428C
200429P
200447C
200459D
200462H
200475H
200492H
200502H
200541E
200556H
200577AL
200580H
200583H
Plate
17055
17054
17007
17007
17030
16615
17003
17003
17002
17057
17007
17057
17003
17051
17051
17003
17054
17003
17003
17007
17002
17051
17056
17053
17050
17050
17030
17052
17052
17051
17053
17051
NUMERICAL
Thread
No.47w66
Thread
Needle
Screw,for
Take-up
for
Peed
Driving
Stop
Bobbin
225368
Hook
Driving
Screw,for
Hook
Driving
235018
Peed
Driving
Screw
Lifting
Screw,for
Needle
Screw,for
Take-up
Machine
Hook
Bevel
Feed
Lifting
"
Driving
Screw,for
Hook
Driving
Screw,for
Thread
No.47w61
Hook
Driving
Position
Hook
Driving
Screw,for
Needle
202692
Feed
Driving
Screw
Peed
Lifting
233695
Bed
Slide
Screw,for
Pace
Plate
Presser
Screw
Presser
regulating)
Arm
Shaft
Thumb
Hook
Saddle
Hook
Bevel
233700
Throat
Bed
Slide
Peed
Lifting
LISTOFPARTS
Guide
Set
Retainer
Bar
Connecting
202692
Lever
Machine
Rock
Collar
Winder
Counter
235018
Shaft
Eccentric
Check
Bell
Crank
233627
Bar
Connecting
202692
Lever
No.47w66
Pinion
Cam
Rock
203244
Shaft
203244
Guide
.Set
Counter
Screw,for
Shaft
235018
Bar
Crank
and
233627
Eccentric
Cam
Clamp
Machine
Thumb
Bar
Thumb
Bar
Thumb
Bushing
Screw
Screw
Gear
Plate
Screw
Clamp
Cam
Name
Screw,for
Stud
Hinge
No.47w61
Set
Pulley
Screw
Hinge
Set
Screw,for
Position
Position
Plate
Screw
Socket
Plate
Retainer
Set
Link
Stud
Shaft
Screw,for
Set
Shaft
Gear
Driving
Link
Stud
Set
Screw,for
Screw,for
Shaft
Collar
Shaft
235018
Gear
(back)
No.47w66
Screw
Screw
(front)
Screw,for
Screw
Machine
Screw
Stud
Set
Connection
210559
Screw,for
Gear
Set
Screw,for
Regulating
Crank
Stud
Set
Collar
(front)
Machine
Gear
Position
Screw,for
Regulating
Screw,for
Thumb
(pressure
Oil
Screw
29
Set
Screw,
Set
Sot
Set
Screw,for
233698
233695
Set
Set
Thumb
Set
Packing
Page 32
30
No.
2005e5H
200587D
200594C
200602C
200607C
200625F
200653C
200728B
200755D
200919C
200935F
200975F
200984C
200996C
201012C
201253F
201254C
201376C
201408C
201408C
201461C
201499H
201522E
201525E
201525E
201525E
201525E
201531E
201570D
201572H
201572H
201650H
201928
Plate
17030
17057
17052
17002
17002
17054
17050
17053
17042
17002
17051
17058
17052
17058
17057
17052
17003
17052
17002
17002
17003
16615
17002
17042
17002
17002
17051
17051
17042
16615
17054
17053
17050
NUMERICAL LISTOFPARTS
Arm
203092
Needle
233647
Bobbin
233765
Arm
Position
Peed
Bracket
Tension
Presser
Bed
Tape
Feed
Hinge
Feed
Presser
Screw,for
Bobbin
Screw,for
Lifting
Machine
Lifting
Position
Hook
"
Pulley
Hook
Feed
Bracket
Feed
Bracket
Hook
Position
Bobbin
Feed
Hinge
Binder
Hinge
Feed
Bracket
Feed
Bracket
Feed
"
Nut
Tape
for
Bobbin
for
Tension
Thread
and
Roller
in.
50553C
203427
Cap
Spool
Bar
Case
Shaft
Connection
Driving
Plunger
Stud
Bar
Clamp
Thumb
Reel
Base
Driving
Screw
Bar
Connecting
Bar
Case
Bell
No.47w66
Bell
Gib
Screw,for
Driving
Set
Gib
Hinge
Driving
Hinge
Driving
Stop
Driving
Winder
Driving
Screw
Plate
Screw
Driving
Hinge
Driving
Stop
Driving
Bar
Connecting
Reel
Tension
231094
Winder
225462
Thumb
Lubricator
241753
Presser,1-1/4
face
and
Holder
Thread
Tension
Screw,for
Eccentric
with
Lifter
Screw
Rock
Lifting
Machine
Tension
233765
Crank
Crank
Screw,for
Shaft
Screw,for
Screw,for
Eccentric
Screw,for
Eccentric
Screw,for
Shaft
Screw,for
Tension
Rock
Nut
Slide
Nut,for
Eccentric
Screw
Eccentric
Screw
Rock
Tension
Nut,for
(fine)
twenty-four
Name
Guide
Spring
204925,for
Hinge
Screw
Shaft
Stop
Driving
237726
Connection
Bushing
Shaft
Stop
Shaft
Adjusting
Screw
with
Base
Screw,for
Screw,for
Spring
Belt
Pulley
224200
Regulating
Stop
Screw
Stud,for
Connection
Link
Screw
Bracket
No.47w66
Spring
Screw,for
233627
235064
237726
Regulating
233612
Regulating
233612
233693
Stud,for
Connection
Swing
230847
Regulating
Nut,for
Regulating
Nut,for
Bearing
Link
Screw
Stud
244062
Nut,for
in.
diam.
1528J,1766C,
16232,for
Screw,for
Screw
244062
231093
Stud
Guide
Regulating
Crank
Belt
(front)
225461
Base
233612
233612
Nut
Stud
Thumb
Thumb
233649
,3/16
Nut,
Nut,
Page 33
NUMERICAL
No.
202005
*202056
202091
202092
202135
202244
Plate
17002
17054
17054
17053
17030
Arm
Bobbin
Thread
" "
Pace
Arm
(wick),for
202244
.
202248
202253
202253
202254
17030 Arm
17030
17002
17003
17007
Arm
"
Hook
Needle
(wick),for
Spring
Pulley
Packing
202254
17057
Take-up
(wick),for
202277
16615
Bobbin
(wick),for
202277
17002
Feed
Oil
202277
17007
Needle
(wick),for
202277
17007
Take-up
(wick),for
Ji
202301
*202311
.
202333
202337
202338
202346
202378
202399
202400
202401
202404
202407
202410
202412
202413
202414
202417
202423
17002
17007
17050
17050
17050
17050
17007
17007
17050
17050
17054
17054
17030
17054
17054
17054
17007
Feed
Bracket
Feed
233615
Needle
202254,for
Presser
Machine
Presser
200086F
Presser
No.47w61
Take-up
202277,for
Take-up
No.47w61
Tension
Thread
Take-up
(wick),for
202443
17030
Feed
233615
Screw
Case
Retainer
Plate
Shaft
Shaft
Cap
Screw
Shaft
Driving
Bar
Lever
Winder
Driving
Packing
Bar
Lever
Driving
Regulating
Bar
Bar
Bar
Bar
" "
Lever
Lever
" "
Release
"
Spring,for
Controller
"
Guide
"
Guide
"
Guide
"
Guide
Lever
Regulating
LISTOFPARTS
Latch
Name
Pin,for
Washer
Sleeve,for
Spring,for
Position
Bushing
(back)
240802
Bushing
207080
Washer
(front)
Connection
Flange,for
Shaft
Spring
Connection
Flange,for
Connecting
(wick),for
Oil
Leader
Machine
Frame
225453
Rock
Shaft
(wick),for
Connecting
264714
Driving
202399
Eccentric
Plunger
Spindle
Connecting
202692
Position
No.47w61
Position
Spring
Stop
Spring,for
Driving
Machine
Hinge
Oiling
Plunger
244062
Spring,for
(on
top
Hinge
202400
Spindle
Pin,for
Belt
224200
Link
202333
No.47w66
Oil
Packing
Connection
Stud
Stud
and
208557
Regulating
Head,for
Link
Guide,for
Guide
Rod
Machine
Stud
No.47w61
Stud
Felt,for
of
Arm)
Stud
Head
233765
204059
204059
233757
Oil
Packing
Oil
Pulley
235064
Stud
Packing
235842
Oil
Oil
Stud
Lever
with
with
244062
Oil
Packing
Pin,for
31
Packing
Belt
Oil
Packing
Packing
with
with
202423
Machine
Page 34
32
No.
202478
202491
202554
202557
202558
202559
202595
202618
202619
202622
202692
202784
202803
203061
203077
203089
203090
203091
203092
203172
203184
203185
203214
Plate
16615
17042
17058
Nos.202557
17050
17050
17050
17002
17053
17030
17053
17007
16762
17060
17053
17042
17030
17030
17030
17030
17007
17053
17053
17052
NUMERICAL
Bobbin
for
Tape
Presser
47w66
Roller
Feed
Bracket
Bed
Peed
Pin,for
Bed
Needle
200383C,200428C
Machine
Foot
for
Presser
Foot
Binder
for
Arm
" " " " "
200079H
Arm
Arm
203090,203091
Needle
Bed
" "
Bobbin
LISTOFPARTS
Winder
259431
Reel
to
Presser
Tension
Bar
Lifter,for
202559,for
Stop
Bar
" " Arm
" " " " "
Driving
Hinge
Eccentric
Plunger
Regulating
233615
Clamp
Packing
Bar
Crank
No.47w61
Lifter
Lifter
Cap
Cap,for
Cap
Clamp
227678
Foot,for
Plate
230847
Spool
and
Bar
and
Crank
Lever
Lifting
Slide
Holder
204296,for
203092
Spool
Washer
Case
Tension
' 203216 17052 " " Washer
203244
203244
203357
203426
203427
.
203470
203473
203474
*203482
203576
203578
203579
203648
204033
204058
204059
17051
Feed
17003 Hook
17058
17050
17050
17052
Vibrating
Roller
Bobbin
17052
17052
Hook
17052
17052
Bobbin
Bobbin
17052
17052
17060
17054
17054
Wrench
Thread
Thread
two
two
Driving
200393C
Driving
200393C
Rock
Shaft
Presser
for
Machine
Presser
No.47w66
Arm,for
" " "
for
233808
"
Case
Latch
" " "
(sewing),for
Case
233700
Case
Lever
Lever
for
" " " "
" "
Latch,for
Retainer
Retainer
202092
and
204058
Name
Latch
Trip
Washer,for
233808
231094
Machine
(hollow)
Bracket
Spring
Spindle
Washer
with
and
Chain
Machine
Stop
Spring
Regulating
Head
Position
200335C,200374C,
202333,for
Hook
(upper),
No.47w61
Lever
Clamp
Base,for
203089
203092
Holder
and
Friction
complete,Nos.
two
200585H
Spring,for
Washer
(cloth),for
Shaft
Collar
Collar
Foot
203426
Plunger,for
Spring,for
237726
Fulcrum
Slide,for
Stud,for
complete,Nos.202091,
Screw
203427
Stud,for
233765
(front)
Washer,
with
233765
233765
with
233700
204059
Lever,
No.
Stop
Washer,
203090
with
233765
233765
with
with
201928,
203579,
203576
Page 35
NUMERICAL
LISTOFPARTS
33
No.
204235
204250
204296
204493
204595
204601
204602
204603
204604
204605
204606
204607
20460.9
204610
204611
204612
204620
204621
204634
204640
204925
206608
206662
206663
206664
206665
206668
Plate
17002
17007
17030
17058
17063
17063
17048
17058
17047
17047
17063
17063
17046
17063
17062
17062
17062
17048
17062
17062
17054
17050
17046
17046
17046
17046
17047
Nos.
Nos.
Arm
Needle
Arm
Vibrating
Lifting
204601
Lifting
Lifting
Position
Cap
Machine
Machine
to
206716
Bar
Thread
Spool
Presser
No.47w66
Presser
No.47w66
204607,for
Presser
Presser
Pin
Holder
206673,206707
Lifting
Presser
206673,206707
Lifting
Presser
206675,206678,206714
Lifting
Presser
206675,206678,206714
Lifting
Lifting
204609
Lifting
206699
206716
to
Presser
and
206700
Presser
204612,for
Presser
206673,206681,206707
206717
Lifting
Lifting
206699
Presser
and
Presser
206700
204634,206698,206705,206706
229620
Lifting
Presser
204634,206698,206705,206706
229620
Vibrating
Presser
204611,204612,204640,206695
206697,229625
Vibrating
229628
Vibrating
Presser
Presser
204612,204640,206695
229625
Lifting
and
Presser
229626
204634,206698
No.47v66
Tension
Presser
Lifting
Vibrating
Lifting
Vibrating
Stud
Washer,for
Bar
Bracket
Lifting
Spring,for
Presser
for
206663,for
Presser
Presser
needle
for
204605
hole,for
206665,for
Presser
" " " "
and
206674
Name
Guide,for
Bar
Foot,for
Machine
Foot,for
Foot,for
and
206715
Foot,for
and
206715
Foot,for
Foot,for
Fbot,for
Foot,for
Machine
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
and
229626
Foot,for
Foot,for
Foot,for
and
229620,for
Releasing
Foot,46
Machine
Foot,for
Ftoot
heavy
Machine
Fbot,for
Wire,for
Spring,for
204620,for
206707
206672,
206672,
206668,
and
206668,
and
206676,
206707
206672,
and
206676,
204620,
204620,
to
206697,
204620,
200625P
Machine
needle
Ho.47w66
(grooved)
cord
No.47w66
233625
203090
No.47w66
and
to
206717
to
206717
206719
206719
and
No.47w66
206715
and
and
204595,
to
206694
204611,
Machine
Lever
No.47w61
hole,
206662
46
covering,
206664
204604,
to
and
Page 36
34
NUMERICAL
LISTOFPARTS
No.
206672
206673
206674
206675
206676
206678
206681
206691
206692
206693
206694
206695
206696
206697
206698
206699
206700
206701
206702
206703
206704
206705
206706
206707
206714
206715
206716
206717
206719
Plate
17046
17046
17047
17047
17063
17047
17046
17046
17048
17048
Nos.206694
17048
17062
17062
17062
17062
17063
17083
17062
17046
17046
17046
17062
17062
17058
17047
17046
17046
17046
17047
Vibrating
204603,204609
Vibrating
204603,204609
Lifting
for
206719,for
Vibrating
204605
Vibrating
204610
Vibrating
204605
Vibrating
229628
Vibrating
229628
Lifting
206692
Lifting
204634,206698
Lifting
for
Lifting
204634,206698,206701
Vibrating
204612,204640,206695
229625
Vibrating
204610
Vibrating
204610
Vibrating
slippers,for
Lifting
206704,for
Vibrating
204612
Vibrating
204612
Vibrating
204603,204607,204609
Vibrating
204605
Vibrating
204603,204609
Vibrating
204603,204607,204609
Vibrating
204603,204609
Vibrating
204605
Presser
Presser
Presser
206668,206675,206678,206714
Machine
Presser
and
206674
Presser
Presser
and
206674
Presser
" " " "
" " " "
Presser
to
206697,for
Presser
and
206693
Presser
Presser
204620,204634,206698
Presser
Presser
and
229626
Presser
Presser
Presser
Presser
206697
Machine
Presser
" " " "
*•
" " "
and
229625
Presser
and,
229625
Presser
Presser
and
206674
Presser
Presser
Presser
Presser
and
206674
Nsune
Foot,for
and
229633
Foot,for
and
229633
Foot,40
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Machine
Foot,for
Foot,for
and
229620
Foot,46
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
Foot,for
and
229633
Foot,for
Foot,for
and
229633
Foot,for
needle
No.47w66
204621,
204620,
needle
204620,
and
to
206697,
206703
No.47w66
and
and
204602,
204602,
hole,
204604,
204606
204604,
204609
229629
206694
206694
No.47w66
hole,
and
229620
229620
204611,
204606
204606
binding
and
206702
206702
204611,
204611,
204601
229633
204604,
204602,
204601
229633
204602,
204604,
and
sind
and
and
and
and
to
to
Page 37
NUMERICAL
LISTOFPARTS
35
206758
207080
208260
208313
208545
208547
208557
208558
208560
208568
210559
211407
211943
212220
212221
212307
213298
213380
213610
,
213787
213890
214838
221147
221148
221163
221174
222404
223655
224372
224572
225016
No.
221164
224200
224392
225368
Plate
17052
17030
17050
17050
17058
17057
17057
17057
17058
17057
17030
17061
17051
17061
17061
17059
17051
17003
17051
17053
17053
17053
17052
17052
17051
17051
17053
17053
17057
17002
17007
17030
17057
16762
16615
Hook
Saddle
233707
Arm
Shaft
Presser
Presser
Lifting
Lifting
Take-up
No.47w61
No.47w61
No.47w66
for
Bar
Bar
Bell
Bell
Machine
Lever
202277,for
Take-up
Tension
Take-up
Peed
Feed
Lever
and
224572,for
Release
Machine
Lever
No.47w66
Driving
Stop
Collar
Dog,for
" " "
" " "
" " "
" " "
"
Bar
350411C
Hook
Driving
233693
Feed
Bar
233694
Bed
(cylinder)
"
Base
Thread
Bobbin
Lubricator
241760
Case
Pin,for
Hook
Gib,for
Feed
Dog
Platform
Feed
Driving
200038C
Bed
Slide
"
(cylinder)
Take-up
Arm
Lever
Shaft
200327C,200602C
233612
Take-up
Arm
Take-up
Foot
Bobbin
Lever
Shaft
233691
Lever
208558
Lifter
227955
Winder
Oil
Packing
Bushing
Bushing,for
Lifter,for
Crank,for
Crank
No.47w66
Driving
Machine
Oil
Slide
No.47w66
Oil
Rock
with
233801
233801
233783
233783
233701
Connecting
Shaft
Connecting
End
(4
In.
Lever
233637
237726
Stop
Washer,for
Throat
Rock
(back)
Cap
Oiling
Connection
Oil
Packing
Oiling
Lever
Pulley
Name
(front)
Driving
Quard
Machine
Leader,for
Shaft
two
Bushing
Cover
high)
Screw
Eccentric
Plates
Shaft
Position
and
Hinge
(wick),for
Machine
Machine
Machine
Stud
No.47w66
with
Spring,for
Connection
200378C
and
233784
and
233784
and
233702
Link
Link
Washer,for
Cremk
Felt,for
Belt
two
(wick),for
Felt
Pin,for
with
with
Crank
with
223655
No.47w66
Machine
with
two
(front),for
Stud,for
Position
use
with
with
Pin
Pulley
202253,for
Rivet,for
200380C,
202244
Link,
208558
with
Page 38
36
No.
225361
225444
225453
225454
225455
225456
225458
225459
225459
225461
225462
225498
225554
,225708
225837
226015
226071
227104
227678
227939
227952
227954
227955
228026
228476
229620
229625
229626
229628
229629
229630
Plate
16615
16615
Wo3.225453
16615
16615
16615
16615
16615
16615
16615
16615
16615
17060
17060
17042
17052
17042
17056
16762
16762
16762
16762
16762
16762
16615
17060
17062
17062
17062
17048
17046
17046
NUMERICAL
Bobbin
Bobbin
259660
Bobbin
Winder
" "
to
225456,for
Winder
Winder
LISTOFPARTS
Spindle,for
Stop
Frame
Frame
" " "
" " " "
" "
for
259431
Bobbin
Hinge
Bobbin
Joint
Bobbin
201499H,for
Bobbin
plete,Nos
two
2102,for
Screw
Driver,7-1/4
Wrench
Binder
Spring,for
Hook
Saddle
Binder
Bed
Slide
Screw
Drip
Pan
wood
Foot
Lifter
with
Foot
Lifter
wood
Foot
Lifter
227955
Foot
Lifter
for
227952
Foot
Lifter
227678,227939
Bobbin
Washer,for
Screw
Driver
Vibrating
Stop
Winder
Winder
Winder
Winder
Stop
Stud,for
Stop
Stud,for
Tension
225462
Tension
.13710,201572H,225461
259431
(steel)
Plate
Slide
230847
Screw
Tape
Tension
Clamp
Washer,for
(cast
screw
iron,square)
1-1/2
Lever
202784,for
Lever
screws
1
Lever
Lever
Lever
Winder
Tension
259431
(Bobbin
Presser
204612,204640,2*06695
229625
Lifting
204634,206698,206705,206706
229620,for
Lifting
204634,206698
No.47w66
Lifting
and
Lifting
229630,for
Vibrating
and
Presser
Presser
Presser
206693,for
Presser
Presser
229626
Machine
Machine
Name
259431
Latch,for
259431
with
202277
Hinge
Pin
Spring
Plunger
Latch
Thumb
Latch
Latch
Bracket
Bracket
in.
Stop
Pin,for
(back)
Machine
Thumb
Thumb
long
Swing
No.47w66
259431
259431
Washer
Plate
in.,No.l4,R.H.B.
Chain,48
227955
Stand
in.,No.12,for
with
Chain
complete,Nos.225016,
and
227952
in.
with
227954,for
Hook
Bracket
Case)
Foot,for
Ftoot,for
Foot,for
and
229620,for
Foot,for
Machine
Foot,for
Foot,for
to
206697,
204620,
No.47w66
204620,
204621,206692
No.47w66
206691
No.47w66
204811,
229629
259431
Lever,
Lever
Lever
with
com
Base
231263
Thumb
with
long
two
227955
(lower),
Screw
and
Machine
and
and
one
and
Page 39
NUMERICAL
LISTOFPARTS
37
V
No.
229633
230251
230654
Plate
17048
17042
17042
230845 17042
230846
230847
231093
231094
17042
17042
17042
17042
Nos.231114
231114 17043
231115
231116
231202
231203
231263
231276
231277
233361
233390
233607
233609
233612
233614
233615
233624
233625
233626
233627
233628
233629
233630
17043
17043
17042
17042
17042
17063
17063
17053
17053
17053
17053
17002
17051
17030
17057
17007
17007
Nos.233627
17057
17058
17058
17058
No.47w66
Washer,for
Tension
Slide
Slide
Slide
and
two
Base
Base
230654,for
on
Wire
Slide
Tension
Tension
Slide
five
Presser
Lifting
Lifting
Clamp
Eccentric
235082
Rock
202619
Crank
No.47w66
with
Machine
Bushing
Crank
and
Lifting
Presser
with
231093
in.
in.
Gap
and
201012C
Name
Foot,for
and
206715
206672,
259091
Spring,for
Stop
(adjustable),
Stop
Swing
Stop
complete,Nos.
200184B,for
200755D,for
with
259091
259092
Shank,for
fold
or
fold
with
231202
Pin,for
Pin,for
with
231202,two
226015,for
Foot,53
Machine
needle
No.47w66
Foot,for
Lever
Position
Lever
Hinge
Plate
(front)
Regulating
with
224200,two
201525E
Shaft
Spindle
Bearing
with
Driving
200125F,200175D
No.47w61
Machine
with
200335C,200383C,
Bracket
Slide
Bar
Lifting
Binder
Tape
Binder
Binder
Binder
Tape
Tape
Binder
Presser
206673,206707
for
Machine
Clamp
259092
Reel
Plate
for
230847
Plate
for
230847
Plate
201525E,203077,225708,230845,230846,
350472H
Reel
231094
Reel
202491
binding,3/32
to
Polder
and
231116,for
binding,1/8
Binder
Binder
Binder
Binder
Lifting
Vibrating
Foot
Foot
Bed
Feed
Feed
Lifting
Needle
Needle
Needle
Presser
Tension
Vibrating
"
Plate
231203
and
231263
and
231263
231203
for
231277,for
Lifter
Spring
Lifter
Washer
(cylinder)
"
Slide
Driving
Bracket
each
Driving
"
Regulating
202443
Machine
204250,for
to
200428C
200054E
Guard
Tape
Tape
Plate
and
Presser
201408C
and
Bell
Bar
Bar
233632,for
Bar
Bar
Release
to
206717,
and
231094
Base,
259091
201570D,
5/l6
in.
3/8
in.
and
231116
231116
259091
hole,
231276
202311,
Crank,for
No.47w66
with
two
Screw
and
Page 40
38
No.
233631
233632
233634
233636
233637
*233640
233642
233643
233646
233647
233648
233649
*233690
233691
233692
*233693
233694
233695
233696
233697
233698
233699
233700
_233701
233702
233707
233708
*233757
233763
*233764
233765
^
233767
233783
233784
Plate
17058
17058
17058
17052
17052
17057
17053
17058
17057
17057
17056
17030
17003
17051
17051
17051
17052
17003
17003
17052
17059
17059
17052
17052
17058
17052
17052
17061
17061
NUMERICAL
Vibrating
Presser
Bobbin
Hook
.
Bobbin
Needle
Bed
Presser
Needle
Needle
Pace
Arm,for
"
" "
Bed
Feed
Feed
Hook
Hook
Hook
LISTOFPARTS
Preaser
" " •'
Bar
Machine
No.47w66
Case
Washer
221147,for
Case
Bar
No.47w66
Slide
Connecting
Clamp
Bar
No.47w66
Bar
Bar
Plate
Machine
with
Thread
with
233648,for
for
Machine
Shaft
with
Connection
(cylinder)
Bar
"
200447C
233700
'*
with
Lifting
Lifting
Bevel
Bevel
Driving
Saddle
Gear
Pinion
Name
Bar
Hinge
Position
Position
Lever,for
with
233700
Lever
Spring,for
Machine
No.47w66
Guide,
233700
233640
Eccentric,for
Link,
Plate
(back)
Machine
200166P,200587D
No.47w66
Guide,for
201650H
No.47w66
224392
and
Belt
with
201461C
213610
Cam
with
200392C
Cam
Retainer
Socket,18
with
two
Shaft
complete,Nos.200110D,
200556H,203576,203578,233636,233637,
233697,233707
Throat
sizes
Machine
Throat
sizes
Machine
Hook
Saddle
233708,for
Hook
Saddle
Arm
with
Presser
No.47w66
Bobbin
Bobbin
Plate,50
14
Plate,46
16
202135,for
Bar
Case,for
Case
and
233767
needle
and
15,for
No.47w66
212307,for
needle
and
18,for
No.47w66
with
212307,for
206758
233700
Oiling
Pelt,for
Machine
Bushing,for
233765
complete,Nos.200594C,
hole,for
hole,for
and
Machine
200984C,202056,203214,203216,203473,
203474,203648,233764,241674,241675
and
two
Hook
233765
Throat
sizes
212221,for
Throat
sizes
212221,for
and
Plate,50
Plate,46
350405C,for
Bobbin
and
14
and
16
and
237726,for
15,for
Machine
18,for
Machine
Case
needle
needle
233767
complete,Nos.
233700
hole,for
212220
No.47w66
hole,for
212220
No.47w66
and
and
350431E
Timing
teeth,for
200386C
Bracket
Stop
for
three
233837
for
Machine
and
233647
350432XC,
Plate
and
213380
and
needle
needle
two
233707
No.47w61
needle
and
needle
and
Page 41
NUMERICAL LISTOFPARTS
39
No.
233601
233807
233808
235003
235011
235015
235016
235017
235018
235018
235019
235021
235064
235066
235082
235088
235842
237726
238246
238251
240439
240802
241443
241561
241674
241675
241753
241755
241756
241758
241759
Plate
17051
17050
17050
17002
17051
17003
17003
17003
17003
17003
17051
17003
17003
17051
17002
17050
17002
17052
17058
17007
17053
17030
17054
17030
17052
17052
17053
17053
17053
17053
17053
Throat
Roller
Roller
Plate,50
sizes
14
211943,for
Presser
Presser
200096D,200117P,202557
sind
Machine
needle
15,for
Ann
and
203427,233807,235088-and
200141P,for
Ann
Shaft
Peed
Hook
Driving
Driving
Machine
Connection
Rock
Counter
" "
(back)
Hook
Driving
Counter
(front)
Hook
Driving
200382C
Hook
Driving
eind
200398C
Hook
Driving
(brass)
Hook
Driving
" " "
Pulley
Peed
Driving
" "
Bracket,for
Roller
Collar
Peed
Driving
with
Hook
203482
221148,for
Presser
for
Needle
Machine
Thread
241760
Am
Shaft
Thread
Balance
2-3/4
200335C
Bobbin
" " " "
233765
Pace
Plate
for
Thread
241760
Thread
241760
Thread
241760
Thread
and
with
Presser
with
200054E
Bar
Machine
Bar
Connecting
No.47w61
Lubricator
Bushing
Controller
Wheel
in.
Case
with
Machine
Lubricator
Lubricator
Lubricator
Lubricator
Counter
200398C
Shaft
Counter
Shaft
202253
Rock
Eccentric
233612
Arm
200362C,for
Rock
and
with
233767
(hollow)
No.47w66
(disc)
diam.)
Oiling
No.47w61
Name
hole,for
211407
No.47w61
Bracket,for
Bar
complete,Nos.
to
No.47w61
Belt
Shaft
Shaft
mm
Shaft
Shaft
Gear
with
Shaft
Bushing
Connection
and
Bracket
202277
with
(back)
(belt
with
Pelt,for
Oil
Oil
Oil
two
Bushing
Regulating
233808
Connection
200074P,
Link,for
Pad
Retainer,for
with
Stop
200328C
Retainer,for
and
Pad
Pad
Reservoir,for
Wick,for
Shaft
Shaft
201253P,201376C
Oil
Spring
201650H
Oil
and
233808
202559,
two
Bushing
Bushing
Gear
200382C
Oil
Tube
(back)
Belt
201254C
Position
202244
groove
233765
350432XC
(felt),for
Holder,for
241760
needle
with
and
and
Page 42
40
No.
241760
244004
244048
244049
244061
244062
244084
259090
259091
259092
259428
259429
259430
259431
259660
263106
.
264714
264718
3S0149E
350405C
350411C
350431E
350432XC
350472H
Plate
17053
17050
17054
17054
17054
17054
17050
17042
17042
17043
Nos.259428
16615
16615
16615
16615
16615
17054
17007
17007
17051
17052
17051
17030
17053
17042
NUMERICAL LISTOFPARTS
Thread
Presser
Tension
Lubricator
240439,241755,241756,241758
241759
Bar
Bracket,for
Disc
" "
"
Tension
Presser
Binder
Binder
Release
complete,Nos.200625F,201572H,
202407,202410,244048,244049,244061
and
263106
Bar
Screw
Packing
Head,for
In
widths
steps
of
and
1/32
Tape
259092
Name
complete,Nos.214838,
Lifting
Machine
(back),for
(front),for
Washer,for
Thumb
Screw
(fibre)
tapes
from
7/32to3/4
Inch,for
Reel
Releasing
No.47w61
244062
Thumb
or
complete,Nos.
230251,230847,231094,231263,259090,
two
each
Machine
Binder
200077D
No.47w66
complete,for
and
5/16
200099D,for
binding,Nos.230251,231114
259090,two
for
Bobbin
Machine
to
259430,for
Winder
each
No.47w66
Brake
200099D
259431
(leather)
" " " Clamp
" "
Universal
Bobbin
and
Tension
Winder
complete,Nos.
200056E,200082D,200113P,200299H,
202478,225368,225381,225444,225453
to
225456,225458,225462,228026,
259428
wood
Bobbin
for
Tension
Needle
200072C
Needle
For
Feed
Throat
Bobbin
Screw,for
Feed
for
Arm
233691
Thread
241753
Binder
Hinge
225453
Machine
Dog
Case
Bar
213298
Shaft
Lubricator
Plate
to
259430,two
screws
Winder
Spring
Bar
Connecting
and
Bar
Connecting
Screw,for
Plates
Oiling
233765
Connecting
Oil
Screw,for
3/4
In.,No.l2,R.H.B.
Frame
Washer,for
202277
No.47w61
use
Felt
Packing
Screw,for
Slide
Stop
230847
Oil
Link
Stop
each
Well
Stud
Link
with
Retainer
Swing
and
Lever
244062
244062
Set
folded
In.,In
259091 and
or
3/8
to
231116,
and
200190D,
Bracket
225459
Washer,
244062
with
Oil
Guard,
Platform
Pinch
Screw,
Screw,for
233649
Base
strips
In.
/
Base
and
and
Page 43
dO
SiHVd
sNOiivaisnni
Page 44
Z^OliMTZviM
'^iO
Page 45
I66I5 -1/2
2
I
Page 46
202764
227955
227678-/18"
22710U
225016
22795/^
Page 47
201U08C
r#
200602c
200010E
200919c
Page 48
2003U6C
235018
2550171200382c
200396c 235016
235015
201254c
235064
201U61C
2003U6C
/
23369fa
200386c
213380
233699
20321+4
235021 200398c
200382c
200164b
Page 49
20037UC
17007 - i/o
202U00
200363c
202o92
203172
22U372
20225U
200335c
202399 202277
264714
200072C
26U718
238251
Ir
233625
202277
233626
200123f|I200175D
^204250
Page 50
200502H
202412
204296
203092
200328C
241561
200079H
203089
202248
O
200338C
233691 210559
202244
350U31E
200278H
207080
224392
203090
2OO505H
>203091
200378C
200335C
200338C
233615
240802
202244
202443
Page 51
200184B
•LLtUMl
. V
'fer.„
Page 52
2000990
^ fffi--Z30251
2311X5
f 8
1 1
231116
259092
Vl6
o'' ^
Page 53
204609
206672
206673
206681
206707
206703
206704
\>
Page 54
204605
206674-^^^
206666
206675
/
206678
r/
206714 206719
Page 55
204602
204603
229633
206672
206694
229628
206673
206707
206715
206716
206717
204621 206692 206693
Page 56
200.'I75H
2tt»l084
17050 -
200492H
1/2
202346
V
\ .
202401
200132E
202404
200260D
200653C
202337^rin
202338
L
200086F
i_
200363AL
200352C
206608
244004
206260
\
200117F
235088
233807
200141F
233808
\
202557
202376
200362C
2000960
203427
/
203426
i
202559
201928
1528J
16232(24)
1766C
Page 57
/
•r.
235019
L/
201525E
233614
/
235011
200935F-''y^t*®\
233801-30
5f
20p577AL^-
35041ic/
233696
' w
200583H
350149E
: h'Jl"lE
213298
211943
AWWWfWftJ,^
/^\
221163
233694
233695
/
/
|200447C
200392C
2003930
213610
203244
200346C
235066
221164
200038C
Page 58
233767
233700
233637
221147
233636
221148
201253F
200I10D
203576
201376C
237726
203474
200556H
i
203578
03579
203216
03214^
200984C
233765
203648
^ \
350405C
IL200594C
^^203473
233708
350405C
241675
241674
(e)
206758
233707
203470
20054IE
225837
20054IE
Page 59
2001I62H
)-
2M1753
203061
200262H
202618
200030H
)«90/'
201650H
233361 2002730
^
L_.V-'350li32XC
214838Q2/1756^^®
^
233643
213787
233609
JSy
200580H
221174
222404
233607
241760
240439
241755
200728B
203165
205184
200262H
20D100D
200030H
213890
202622
Page 60
202413
200355H
20C3WH
204059
202414
200397H
244061
263106
244062
2UHOH9
L
202410 200625F
2OOO6IC
200132E
Page 61
Z0Zkl3
200355H
200368H
204059
202141^1
2UIW61
263106
244062
26U01+9
2UU014S
200368H
202U10
2«14U3
20^*058
200132E
202091
200625F
200061c
Page 62
203061
200262H
202618
/
^2002730
V
'
|21.W38
\ ^
200580H
200459D
233609
226071
.r~^i
241>59
221174
222404
233607
^^^^2001000
^41760
AT^'
241755
200728B
203185
203184
200262H
213890
202622
Page 63
202U00
17057 - %
2003630
200161H
208568
201012C
200428c
203172
2003630
(5
200072c
/ A '
20225«
233627
00335c
26471il
208547
2336U2
202277
202277
233647
200352C
233626
233648
200166F
200587D
Page 64
17058 -
1/2
233634
200975F
202404
200475H
200352C
244084
200086F
200054E
238246
200492H
202338
200996C
208560
202346
208545
233646
2000660
200363AL
/
204493
2001900
233632
233630^
1/
P
200074^
200653C
202554
m
(0
204603
206707
j-W|G
203357
200098F
1
Page 65
>
I
r
23361^1
201525E
200935F
233701-50
233702-46
350illlC
233696
200583H
200577AL
350149E
201531E
221163
235011
233694
233695
200447C
200392C
200393C
213610
203244
200346C
235019
235066 200038C
221164
O
Ui
-o
Page 66
17060 -
1/2
2251^98
22555^
20U033
120342
202603
120343
X
51078
4822
51078
Page 67
211^107
212220
212221
221163,
350149E
233801-50
200577AL
15=1
233783-50
23378U-W
15=1
O
O
Page 68
204611
229625
204612
229626
206695
206697
204620
206705
204634
206706 229620
206698
204640
204620
206698
206696-46
204634
229620
206698
204620
206701
204634
229620
Page 69
y
)
2011601
206707 206716
204607
231276-53
204606
206699
206676
204610
206700
204595
204620
I
Page 70
v£
Page 71
Page 72
- ?
Loading...