Singer 251-11, 251-12, 251-13 User Manual

Form

21093

(860)

PrintedinU.S.A.

LIST

OF

PARTS

SINGER

MACHINES

Nos.

THE

**ATrademark

SINGER

of THE SINGER MANUFACTURING COMPANY

251-11

MANUFACTURING

to

251-13

COMPANY

INSTRUCTIONS

FOR

OILING

Before starting

the

basetothe

C"

OIL, sold by Singer Sewing Machine Company, as in

structed

in

Form

The reservoir holds approximately

When

in operation, the oil level in the reservoir should

be inspected at

essary to keep it

reservoir.

"TYPE

which will produce a minimum of stain, even after a long

period of

Refill

C"

storage.

the

machine, fill

HIGH MARK

21075

least

twice

from

to HIGH MARK with

with

and

21079.

a month or as oftenasIs nec

gowing

below the

the

"TYPE

V/2

"TYPE

oil reservoir in

A"

or

"TYPE

pints.

LOW

MARK

A"

OIL.

In the

OIL, is to be used, when an oil is desired

INDEX

Page

Accessories 34

Bobbin

Winders

34

Fittings 22

Knee Lifter 35

Machine 251-11 7

Machine

Machine 251-13 20

Machine

Numerical

Puller Feed Device 32

Thread Unwinder 36

251-12

Base and Oil Reservoir 36

ListofParts

39

\

INSTRUCTIONS

FOR

ORDERING

In ordering

column.

The

number

from

this list, use ONLY the port

stamped

on a

number of the single part only.

Every

combination

which,

although

the

combination.

Eoch

number

appeors,

or for

The letters after

only,asfollows:

NEW

CODE

801 802

803

804 805

806 807 808 809

810 811 812

813

814

815 816 817 818

819 820

821

822 823 624

825

826 827 828

829

830 831

832 833

OLD

CODE

A

B

C

D

E

F

G H

J

K L

M

R S T

U

V

w

X

Y z

A.A. A.B.

A.E.

A.F.

A.G. A.H. A.J. A.K.

A.L.

A.L.D.

A.L.J.

A.L.X.

of parts sent out as such hos its specific

not

stamped

always indicates the

whatever

machine.

some

of the

Hardened,

Polished,

Hardened Only

Polished

Soft,

Not

Hardened

Bright

Rumbled

Blued

Nickel

Plated

Hardened

Brass

Plated

Oxidized

Phosphote Coating Formed on Surface of Iron or Steel

Cadmium

Copper

Zinc

Silver

Polished

Black

Plated

Oxide,

Black Nickel Plated Only

Chromium

Buffed

and

Hardened,

Hardened, Bright Rumbled and Nickel

Hardened,

Rumbled Alumi

lite.

Alumilite, Dyed. Color must be

Polished, Hardened,

Plated.

Heat Treated for Toughness.

Heat Treated for Toughness and Polished. Heat Treated for Toughness and Nickel Heat Treated for Toughness and Black Oxide.

Sewing

Machine

onthe parts,

SAME

numbers

Polished,

Nickel

Ploted

NUMBER

Port is in

mustbeused

PART in whatever list It

indicate the style of finish

Nickel

Ploted

and Buffed

in the FIRST

every

when

and Buffed

Only

Polished

and

Polished

and

Nickel

Plated

Only

and

Nickel

Plated

and

Nickel

Plated

for Iron

Plated

Chromium

Polished,

and

Steel

Ploted

Buffed and Chromium

Plated

Bright

and

Plain

Rumbled,

Chromium

Nickel

Plated.

Plated,

stated.

Nickel Plated and Chromium Ploted.

Polished,

Nickel Plated and Chromium

Plated.

case the

number,

ordering

Plated

Bright

INSTRUCTIONS

FOR

ORDERING

NEW

CODE

834

835 836

837

838 839 840 841

842

843 844

845 846

847

848

849

850

851

852

853

854

855

856

857

858

859

860

OLD

CODE

A.L.Z.B.

A.S. A.T.

A.U.

B.A.

B.B.

C.R.

C.U.

F.J.

T.A.

T.B. T.J.

T.K.

T.L.

T.M. X.C.

Z.A.

Z.B.

Z.C. Z.D. Z.G.

Z.J. Z.T.

A.L.Z.J.

—

-

Heat

Treated

Buffed

and

Chromium

Black

Moulded

Beige

Moulded

Brown

Moulded

Chrome

Hardened

IronorSteel

Hardened

Hardened,

Buffed

Copper

Hardened,

Copper Copper

Hardened Hardened,

Chromium

Polished,

Hardened Polished

Nickel,

and

Polished

Polished,

and

Copper

and Plated

and

Polished,

Plated

Nickel

and

Nickel

Brass

Bright Rumbled,

Chromium

Nickel

Copper Heat

Ploted

Heat

Oxidized

Nickel

Plated

and

Treated

Plated

Chromium

for

Toughness,

Phenolic

Satin

Chrome

Phosphate

Zinc

Plated

and

Plated

and

Oxidized

Black

Plated,

Chromium

Nickel

for

Toughness,

for

Toughness,

and

Buffed Only

Plated

Finish

Nickel,

Coating

and

Nickel

Copper and

and

Only

Nickel

Oxide,

for Iron or

Nickel

Plated,

Buffed

Plated

Plated,

Plated

Polished,

Satin

Nickel

Finish

Formed on

Plated

Nickel

Plated

Polished

Plated

Steel

Buffed

and

Chromium

Bright Rumbled and

Nickel

and

Chromium

Copper

Plated

Plated,

Surface

and

of

Ploted

These

letters

the

number In

this

1to1500,

1501to1800 1801to2000

192000 and upward

The

figuresinthe

parts,

and

Parts

madeatthe

MUST BE USED

asinthe

series:

list.

50001to51500

and and

second

are

NOT TOBEUSED in

marked

withanasterisk

factory.

51500to51800 51801to52000

are

when

they

appearinthe

and

14001 to

are ore

nut roller

142000

numbers

number of Vacuum Cleaner

column

refer

onlytoplates;

ordering.

(*)

are

furnished

only

list;

ore

screw

Parts.

illustrating

when

and

numbers.

repairs

AFTER

the

are

LIST

FOR

GENERAL

DIUM

ANISM.

WEIGHT

CLEARANCE

STITCHING

FABRICS.

OLE BAR STROKE

PER

INCH.

OF

PARTS

COMPLETE

FOR

MACHINE No. 251-11

OPERATIONSONLIGHTTOME-

HAS

UNDER

1-9/64".

PENDANT LINK FEED

PRESSER FOOT

MAXIMUM

STITCH LENGTH 8

9/32".

MECH

NEE-

No.

147001

8582

50608(819)

Plate

NOTE:

8287

8269

Name

Arm

Duetothe

alignment,

ately

Arm

and

can

Bed

Dowel

accuracy

Arm

assembled.

required

cannot be supplied separ

onlybesent

(2)

Hole Plug Screw (top of arm) for

for

outosa

gear

unit.

plugging hole used to assemble take-up

oil

wicks

140705(805) 8287 Arm Screw (back)

146552 8287 140315(805) 8287

Arm

Screw (front and intermediate) (2) ..

Arm

Screw Stud (back) (2)

147003 8269 Arm Shaft (horizontal) and Needle Bar

Cronk with 1036(830), 140542(830) and

140609(830)

147486 8269 Arm Shaft (horizontal) Bushing (center)

140296(830) 8269

147112 8269 Arm Shoft (horizontal)

Arm

Shaft (horizontal) Bushing (center)

Set

Screw

Flanged

(back)

Bushing

8

PARTS

FOR

MACHINE

No.

25M1

No.

146790

207(805)

140297(830)

147005

140279(830)

144(804)

140640(805)

147109

147468 8269

457(830) 8269

143013

143014

1259(830)

143015

1259(830)

143016 140298(830)

'^7111

50504(830)

147007 8272 147008 8272

16709

147010

217(819)

52239

Plate

8269

8

269

8269

8

269

8269

NOTE: To ensure proper functioning of Gears, No.

8269 8269

NOTE; To ensure proper functioning of Gears,

8269 8269

8269

8272

8274

8879 8274

NOTE: Whenordering No. 8879,

Name

Arm

Shaft

(horizontal)

(back) Oil Sump Tube

Arm

Shaft

(horizontal) Flanged

(back)

Oil Sump

Arm

Shaft (horizontal) Flonged Bushing

(back)

Set

Arm

(front)

Arm

(front) Set Screw

Arm

Washer

Arm

with

Arm

Screw

Arm

right hand spiral with two 1259(830)

143014 will not be supplied separately,

but will be

No.

143295.

Arm

Set

Arm

Left hand spiral with two 1259(830)

143015

but will be

No.

147476.

Arm

Set

Arm Arm

Set

Arm

Set

Screw

Arm Arm

Arm

147007

Arm

Arm Arm

required.

Screw

Shaft

(horizontol)

Shaft

(horizontal)

Shaft (horizontal) Screw (back)

Shaft(horizontal)

Shoft

(horizontal)

(fiber)

Shaft (horizontal) Thrust Collar

two 457(830)

Shaft (horizontal) Thrust Collar Set

(2)

Shoft(upright)

Shaft

(upright)

substitutedbyPairofGears

Shoft

(upright)

Screw

(2)

Shaft

(upright)

will not be supplied separately,

substitutedbyPair

Shaft

(upright)

Screw

(2)

Shaft

(upright)

Shaft

(upright)

Screw

Shaft

(upright)

Shaft

(upright)

Side Shield Side Shield

Side

Shield

Side

Shield

ond

147008

Side

Shield

Spool

and

Spool

Washer

Flanged

Tube

Holder

Flanged Flanged

Screw

Bevel

Bevel Bevel

Bevel

Bushing Bushing

Bushing

Wick

Spring

complete,

Screw

(2)

Thread

(cloth)

state

Gear

Geor

of Gcors

Gear

(lower) (lower)

(upper)

Holder

Nos.

Eyelet

color

Bushing

Screw ....

Bushing Bushing

Plug

(lower)

(lower) (upper)

(upper)

16709,

(front)

No.

PARTS

FOR

MACHINE

No.

251-11

No.

147011

147012

147013

Plato

8275

8

8275

NOTE:

147014

147015

51369(813)

143244

147105

8256

8275

8 256 Arm

8256

140607(819) 8256

64519

146511

*147490

143024 143268

1518(809)

8256

NOTE:

8287 8287

8287

Arm

Top

256

Arm

Top

Arm Top Plunger

147011

No.

this

Arm

Plunger pin

64519,

147105

Arm Arm

3-1/2

Arm

Hole ger prevent

Arm

Spring

Arm

Stop

Bed

Doetothe

complete,

ond

147013isregularly

machine.

Top

complete,

(3-1/2

143244,

Top Top

Top

in.

Top

Top Cover Stitch Regulator Plunger

Plug

hole

tampering

Top

Ring

alignment, Bed cannot be

ately

and

can

Arm

and

Bed

Hole

Bed

Leg

Bed Leg

Cover

in.

Cover Cover

Cover

long

Cover

Screw for

when

Covar

Cover

accuracy

Plug

(bock)

(back)

Name

for

147013

for

147014

with

Stitch

Nos.

147105

furnished

with

Stitch

when a

long)isrequired,

146511,

Gasket

Screw

(4)

Spool

with

Stitch

Regulotor

plugging

the

Plungerisremoved with

the

Stitch

Regulator

Stitch

Rogulator

required

onlybesent

assembled.

Nut (2)

Rogulator

64519,

146511,

Regulator

longer

147012

ond

Spool

the

stitch

for

geor

supplied

outasa unit.

12431(819) 8276 Bed Slide

4307

8276

Bed

Slide

Spring

725(819) 8276 Bed Slide Spring Screw (2)

12432 8276 Bed Slide complete, Nos. 4307, 12431-

(819)

and

two

725(819)

Bell

147477 147478

158(813)

140941(803)

1650(819)

147479

147469

147096

147019

8279 8279

8

280

8280

Crank

Bell

Crank

Bracket

Bell Crank

Bell

Bell Bell

140941(803),

Combination

lator

Crank

Crank Crank

Ports,

Brocket

Hinge

Screw (2)

Screw

Screw Nut

complete,

147477

of

Nos.

and

Feed

143015, 143040, 143049,

143087, 143134, 147472

Face

Plate

Foce

Plate

Gasket

Nos.

and

1650(819),

147478

Stitch

and

147473

with

spool

Nos.

Rest,

Plunger

Plun

set

Plunger

separ

Regu

to

....

10

PARTS

FOR

MACHINE

No.

251>11

No.

152(809)

738(809) 8280

147470

Plate

8280

8281

Face

Feed

Plate

Plote

Bar

Nome

Screw

(lower)

Screw (upper)

(3)

147471 Feed Bar 147470 with 147290, 147355,

147356.

272110

and

two

1423(803)

147355 8281 Feed Bar Carrier with two each 158(805)

end

140788(805)

158(805) 8281

143031

143032

147024

228(805) 8281

8281

Feed

Bar Carrier Clamping Screw (2) ....

Feed

Bar

Carrier

Oil

Wick

Feed

Bar

Feed

with

Feed

(2)

Bar

143031

Bor

Carrier

Oil Wick

Oil Wick Holder 143032

Oil Wick

Holder

Screw

272110 8281 Feed Bar Connecting Link

1423(803)

147288 8281 Feed Bor Connecting Link Oil

272111 8281 Feed Bar Connecting Link Oil

147035 8281 Feed Bar Connecting Link Oil

50579(809) 8281

147289 Feed Bor Connecting Link Oil

8281

Feed Bar Connecting Link Cap Screw (2)

Wick Wick

Clamp

Wick

Holder

Feed

Bar Connecting Link Oil Wick

Holder

Screw

Wick

Holder

147035

with

147288

147356 8281 Feed Bar Hinge Pin (eccentric) 140788(805) 8281 Feed Bar Hinge Pin Clamping Screw (2)

147315

50117(830) 8276

147472

8276 Feed

Feed

Dog,

28 teeth (22 teeth to the inch)

Dog Screw (2)

8269 Feed Eccentric with

1036(830)

1375(830)

and two

1375(830) 8269 Feed Eccentric Body Position Screw ....

1036(830)

140566(830)

8269 Feed Eccentric

8269

Feed Eccentric

Body Stop

Set Screw

NOTE: No. 140568(830) is regularly

with

thisMachine.

Screw

(2)

(8 stitch) ..

furnished

140256(830) 8269 Feed Eccentric Stop Screw(7 stitch) ....

140257(830) 140258(830)

147473 8269 Feed Lifting Eccentric and

8269 Feed Eccentric Stop Screw

(5)6

stitch)

8269 Feed Eccentric Stop Screw (14 stitch) ..

Arm

Shoft

NOTE: To

(horizontal)

spiral

143088

ensure

Bevel

Gear,

right

hand

with 1259(830), 140333(830) and

proper functioning of Geors, No.

147473 will not be supplied separately,

140333(830) 8269

but will be

147476.

Feed

substitutedbyPairofGears

Lifting Eccentric Position Screw

1259(830) 8269 Feed Lifting Eccentric Set Screw

147025

8281

Feed Lifting

Rock

Shaft

No.

PARTS

FOR

MACHINE

No.

251-11

n

No.

147030 Feed Lifting Rock Shaft Nos. 197(805),

143052

197(805)

147028 8281 Feed Lifting Rock Shaft Bushing (2) ....

447(830)

143039 8281

223(805)

147029 8281 Feed Lifting Rock Shaft Collar with two

460(830)

143040

140230(803)

1518(809)

147474

966(805)

147290

140915(830) 140359(805)

143236 8281 Feed Lifting Rock Shaft Oil Plug Screw

147038 8281 Feed Lifting

147037

147039

147047

197(805)

147040 8281 Feed Rock Shaft

147041

147042 8281 Feed Rock Shaft Bushing (back)

447(830)

147043

447(830)

Plate

140359(805), 143236. 147025. 147038,

147039, 147047 and two 147037

8281

8281 8269

8269

8281

Feed Lifting

Shaft

Oil

Feed Lifting

Shaft

Oil

Feed Lifting

Screw

(2)

Feed

Lifting

Feed Lifting

460(830)

Feed Lifting

Screw

(4)

Feed Lifting

Feed

Lifting

Hinge

Screw

Feed

Lifting

Hinge

Screw

Feed Lifting

with

966(805)

Feed Lifting

Clamping

8281 Feed Lifting

with

140915(830)

8281 8281

8281

Feed

Lifting

Clamping

Feed

Lifting

Washer

Feed Lifting

(2)

Feed Lifting Rock Shaft Oil

Feed

Lifting

ing

Plote

Feed

Lifting

ing

Plate

Feed

Rock

(805), 143236, 147039, 147040, 147046,

147047

Feed

Rock

Screw

Feed

Rock

Feed

Rock

Screw

Wick

(2)

Screw

(fiber)

Screw

and

Name

Rock

Shaft and Feed

Holder

Rock

Shaft

Holder

Rock

Shaft Bushing Set

Rock Shaft

Rock

Shaft

Rock

Shaft

Rock

Shaft

Rock

Shaft

Rock

Shaft

Nut

Rock

Sioft Crank (back)

Rock

Shaft

Rock

Shaft Crank

Rock

Shaft

Rock

Shaft

Rock

Shaft Oil

Rock

Shoft

Rock

Shaft

Rock

Shaft

Nos.

two

147045

Shaft

Bushing

Shaft

Bushing

Shoft

Boshing

and Feed

Screw

Cap

Collar Set Connecting

Connecting

Cronk

Crank

Oil

197(805).

(back)

(front).

(front)

Screw

(back)

(front)

Plug

Wick

-

Wick

-

Rock

(2)..

Rod

Screw

(long)

(short)

Clamp

140359-

Set

12

PARTS

No.

143048

223(805)

147029

460(830)

143049

140230(803)

1518(809)

147044

157(809)

140359(805)

143236

147046

147045

147039 147047

197(805)

25878

50190(819)

147139

51283(830)

147140

147162 143336

1133(830)

52171

143324

1133(830)

147492

147050

140231(803)

143056

143326

140706(803)

147053

Plate

8281

8281 8281

8281

8269

8281

8281 8281

8281

8268

8256

NOTE;

8256

8282

8272

Name

Feed

Rock Shaft Cap

Feed

Rock Shaft Cap Screw (2)

Feed

Rock

Shaft

Collar

with

two

460-

(830)

Feed Rock Shaft Collar Set Screw (2).....

Feed

Rock Shaft Connecting Rod

Feed Rock Shaft Connecting Rod Hinge

Screw

Feed Rock Shaft Connecting Rod Hinge

Screw

Nut

Feed Rock Shaft Crank with 157(809)....

Feed

Rock Shaft Crank Clamping Screw

Feed

Rock Shaft Oil Plug Screw

Feed

Rock Shaft Oil Plug Screw Washer

(fiber)

Feed

Rock Shaft Oil Wick (long)

Feed Rock Shaft Oil

Feed

Rock

Shaft

Feed Rock Shaft Oil

Plate

Feed Rock Shaft Oil

Plate

Screw

Guide

(Accessories)

Guide Thumb Screw Machine Pulley, small rim diam.,

power)

"V"

belt

Wick

Oil

Wick

Wick Wick

(Accessories)

groove

2.9 in. with two

(short) (2).

Clamping Clamping

(disc

51283(830)

No. 147139 is regularly furnished.

Machine Pulley Set Screw (2)

Machine Pulley large rim diam. (disc

power) **V"

51283(830)

belt

groove 2.9 in. with two

Needle Bar (hollow) with 140239(830)....

Needle Bar Bushing (lower)

Needle Bar Bushing (lower) Set Screw .. Needle

Eyelet

Bar Bushing (lower) Thread

Needle Bar Bushing (upper)

Needle Bar Bushing (upper) Set Screw ..

Needle Bar Connecting Link Needle Bar Connecting Link 147492

with

143326

Needle Bar Connecting Link Cop Screw

Needle Bar Connecting Link Roller

Bearing

(18)

Needle Bar Connecting Stud with

140706(803)

Needle Bar

Connecting

Stud

Clamping

Screw

Needle Bar Connecting Stud Oil Wick....

PARTS

FOR

MACHINE

No.

251-11

13

No.

143058 8282

140542(830)

143196

140239(830)

Plato

8269

8272

8282

Needle

Block

Needle

Bar Connecting Stud Slide

Bar

Crank

Bor

Oil

Wick

Set

Screw

146591 8231 Oil Flow Body

143061 8231 Oil

143062

8231

143063 8231 Oil

Oil

Flow

Body

Gasket

Window

Window Cap

50257(809) 8231 Oil Flow Window

143370

51369(805)

143064 8231 Oil

143384 8231 Oil

143065 8231 Oil

143066 8231 Oil 147106 8231 Oil

143387 Oil

143124

143125 8231 Oil

143126 8231 Oil

143070

143071 8231 Oil

157(805) 8231 Oil Pump 143072 8231 Oil 143073 8231 Oil Pump

50123(805) 8269 Oil Pump

143074 8231 Oil

143075 8231 Oil Pump

189(805)

147107 146745

147108

8 231

8231

Oil

(front)

Shaft

143064,

Rotating

8231 Oil

8231

8231 Oil

8272 8272

Oil

143126

Screw

Screw Oil Oil

Body

Oil

Lead

Screw

Pipe

for

147106

Pipe

for Oiling Rotating Hook Shaft

Beoring

Pipe

Clamping

Pipe

Clamping

Pipe

complete

(horizontal)

143065

Pipe

143384

and

with

Hook Shaft Front

Pipe

Clamping

Pipe

Clamping

Pipe

Clamping

Pump

(centrifugal)

Pump

(centrifugal)

(2)

(centrifugal)

Pump

(centrifugal) (centrifugal) (centrifugal)

Pump

(centrifugal)

Pump

(centrifugal)

(4)

Removing

Wick Wick

Wick

Body 146745 with 146698 and 147107....

140553(805)

8272

Oil

Body

Removing

Hinge

Wick

Screw

146700 8272 Oil Removing Wick

Body

228(805)

8272

Stop and

Oil

Removing Wick

Spring

Body Stop and Spring

146698

8272

Oil Removing Wick

Body

Spring

Name

Position

Cap

Sleeve

from Oil

Center

143066

143124 for

Sleeve

(head (head

(head

Clip

(head

Clip

(head

Screw

(2)

Screw (4)

Nut

PipetoArm

Bearing,

Bearing

Nut

Body

with

Body

Position

Body

Screw Cover Impeller

Impeller

Screen

end) end)

end)

Screw

end)

........

Nos.

oiling

Adaptor..

(3) ..

Locking

Frame

Holder

....

14

PARTS

FOR

MACHINE

No.

251.11

No.

147054

147055

1364(819)

147056

147141

147143

140232(819)

143295

147476

147057 147058

1133(830)

147392

50203(830)

147060

69(850)

147372

147027

143108

1611(819)

143191

143109

802(819)

147373

147062

448(830)

146610

147291

2070

62527

147306

Plato

8272

8269

8269 8269

8285

NOTE)

8285

8279

8285 8279

8279

8285

8279

8285

8285 8276

8276

Name

Oil Removing Wick (head end) Hinge

Plate

and

Cover

Oil Removing Wick (head end) Hinge

Plate

and

Cover

Gasket

Oil Removing Wick (head

Plate

and

Cover

Screw

Oil Removing Wick

(head

(4)

end)

Hinge

Holder

Body complete, Nos. 228(805), 140553-

(805), 146698, 146700, 146745, 147054,

147055

Oil Wick, 11 in. long, for

Lever, Connecting Lever

Oil

PairofGears

Presser Presser

No. 143184isusedinplace

when

Presser

(830)

Presser

and

Presser

Presser Presser

Rod

Presser

Rod

Presser

Presser Presser

Presser

Wick

using

Tension

Presser

Rod

Presser

Nut

Rod

Lock

Presser

Rod

Oil

Presser

Swivel

Presser

Presser Presser Presser

Presser

and

147107

Take-up

Lever

Link

Hinge Bearing (2)

Holder

with

Holder

Screw

Nos.

Bar

(hollow)

Bar

Bushing

and

Link,

Thread

two

143014

143015

(lower)

oiling

Needle

Take-up

147141

and

Take-up

143081

147473

of No. 147058

QuilterorFinger

Bar

Bushing

Bar

Guide

Bracket

Bar

Guide

Bracket

Releoser

Bar

Lifter

Bar

Lifter

Hinge

Bar

Lifting

Bar

Nut

Bar

Mist

Bar

Lifting

Lever

Lifting

Retaining

Lifting

(lower)

Screw

Bracket

Lever

Disc

Lever

Guards.

Set

Screw..

with

50203-

Clamping

Screw

with

448(830)

Connecting

(felt)

Connecting

Bar Lifting Lever Hinge S^rew

Bar

Lifting

Bar Bar

Bar Bar Bar

Foot

Lifting Lifting

Lifting Spring Spring

Hinge

Plate

Lever

Lever Lever

Lever

Washer

Link

Pin Pin

Spring

Set

Bar

........

Screw

PARTS

FOR

MACHINE

No.

251-11

15

No.

147307

26231

147308 8276

140390(830)

147091

51614(809) 8285

143340

143341

143342

143343

143344

270010

52235 52236

Plate

8276

8285

8286

8286 8286

8286

Presser

Nos.

26231,

Presser

Pressure

Presser

Pressure

Nut

Rotating

1253(830)

Rotating

270083

Rotating

143346 Rotating

three

1367(805)

Rotating Rotating

Name

Foot

Shank

Foot

Spring

Foot

(spring

62527,

147306

Foot

Screw

Reguloting

Bar

Guide

Regulating

Hook

Thumb Screw and

Thumb Screw

with

143301 and

Hook 143340 with

and

four

1053(805)

Hook 143341

and

three

1367(805)

Hook 143341 with

Hook

143342

Hook

Bobbin

Hook Bobbin Hook Bobbin

hinged)

with

Case

complete,

and

147307

two

143351,

40274,

40274

52237

52235 with

591(806), 1380(805) and 40394

40392

125320

2974

2975

592(805) 8286

40393 8286

591(806)

40394

1380(805)

52237

143346

147475 8286 Rotating Hook Bobbin

8286

Rotating

Fulcrum

Rotating

Screw

Rotating

Nos.

2974,

Rotating

Regulating

Rotating

Spring

Rotating Spring

Screw

Rotating

Nos.

592(805),

Rotating

Position

Hook

Bobbin

Hook Bobbin

Hook

Bobbin

Hook

Bobbin

Hook Bobbin

40392

and

Hook Bobbin

Screw

Hook

Bobbin

Hook Bobbin

Hook

Bobbin

2975,

Hook Bobbin

Bracket

Case

Cose

Case

125320

Cose

40393

Cose

Latch

Tension

complete,

and

Holder ......

Holder

704(809) 8286 Rotating Hook Bobbin Cose Holder

Position

Bracket

Screw

140551(803) 8286 Rotating Hook Oil Flow Regulating

Thumb

Screw

143383

8286

Rotating

Thumb

Hook Oil

Screw

Spring

Flow

Regulating

233(805) 8286 Rotating Hook Oil Flow Regulating

Thumb

Screw

Spring

Screw

Lock

and

Lever

Spring

Stop

Hinge

52236

..

16

PARTS

FOR

MACHINE

No.

25M1

No.

143301

40274

1367(805)

1253(830)

143347

147130

143081

1259(830)

143082

140259(830)

143382

1285(830)

143042

143349

143350

147131

50429(830)

270083

1053(805)

143351

147166

190(809)

147092

402(819)

143085

143134

143086 143087

143088

143378

140549(805)

2102

1560(803)

147151

Plate

8286

8286 8286

8286

NOTE;

8286

8286 8286

8286

8285

8256

8269

8274

8274 8274

Name

Rotating Hook Oil Wick (felt)

Rotating

Rotating Rotating

Rotating Rotating Rotating

Hook

Section

Hook

Section

Screw (3)

Hook Set Screw (2)

Hook

Shaft

with

Hook

Shaft Shaft

143347

Bevel

Hook

143350

with

Gear

147131

(left

hand Spiral) with two 1259(830)

To

ensure

proper

functioningofGears,

143081

but will be

No.

will

143295

Rotating

Screw

not be

supplied

separately,

substitutedbyPairofGears

Hook

Shaft

Bevel

Gear

(2)

Set

Rotating Hook Shaft Bushing (back) ....

Rotating

Screw

Hook

Shaft

Bushing (back) Set

Rotating Hook Shaft Bushing (front) ....

Rotating

Screw

Rotating

Holder

Rotating Hook Shaft Oil

Nos.

Rotating

with

Rotating

Set

Rotating

143042

two

Screw

Hook

Shaft

Hook

Shaft

Hook

Shaft

and

Hook

Shaft

50429(830)

Hook

Shaft

(2)

Hook

Thread

Bushing (front) Set

Oil

Filter

Oil

Filter

143349

Oil

Retaining

Oil

Retaining

Guard

Wick ....

Wick

complete,

Rotating Hook Thread Guard Screw (4)

Rotating

Slock

Stitch Stitch

Stitch

143086

Hook Wiper

Threod

Thread

Length

Regulator

and

143378

Regulator

Indicator

Screw

Plate

Screw

143085 with 140549(805),

Stitch Regulator Locking Slide

Stitch

Wheel

Stitch

Wheel

Regulator

Locking

Slide

Locking Slide

Ratchet

Stitch Regulator Locking Slide Spring .. Stitch Regulator Locking Slide Spring

Screw

Tension

Disc

(2)

Regulating

Releasing

Thumb Nut

Disc

Lock

No.

Collar

Nut

PARTS

FOR

MACHINE

No.

251-11

17

No.

147159

147160

50123(819)

147161

12398

12329

32574

147152

140873(803)

147292

50305(803) 8274

147293

147090

147069

52454

624(830)

147386

147197

147186

Plate

8274

......

8274

8274 8274

8274

8282

Tension

147159

Tension

Screw

Tension

Tension Tension

Tension

1560(803)

Tension

52394,

2102

Threod

Thread Thread

Lever

143056

Thread

Lever

147193 Thread

Lever

Link

Hinge

and

147197

Releasing Releasing

with

50123(819)

Releasing

Spring

Stud

140873(803)

Stud Set Screw

complete,

147151,

Eyelet

Guard Retainer

Retainer

Take-up

with Link

Take-up

with

Link

and Take-up

with

Link

147152, 147292 and

(side

Set

Crank,

147079

with

Crank,

147079

with

thirty-six

Cronk,

147079,

and

Threod

Stud

Name

Lever

Body

Lever

(adjustable)

and

Lever

(adjustable)

Lever

Segment

Lever

Hinge

Lever

Spring

with

Nos.

32574,

of arm)

Screw

Threod

and

Thread

147193

140231(803),

and

Thread

143056

Thread

Take-up

complete,

147161

two

52083,

Take-up

eighteen

Take-up

143058,

Take-up

Nos.

two

Lover

147075

140609(830) 8269 Thread Toke-up Crank Clamping Screw

140610(819) 8269 Thread Take-up Crank Clamping Screw

Hole

Plug

Screw

147070 8269

1036(830) 8269

147193 8282 Thread Take-up Crank Wearing

147156 8280

147077

8280

Thread

Hole

Thread

Take-up Crank Clamping Screw

Plug

Screw

Gasket

Take-up Crank Set Screw

Take-up

Lever Guard

Lever

Guord

Gasket

Plate

152(819) 8280 Thread Toke-up Lever Guard Screw (2)..

147073 8282

147074

8282

435(830) 8282 Thread Take-up Lever Link Hinge

Thread

Oil

Wick

Set

Screw

Take-up

Lever

Link Hinge Stud

Lever

Link

Hinge

Stud

147075 Threod Take-up Lover Link Hinge Stud

147073

with

147074

....

18

PARTS

FOR

MACHINE

No.

251-11

No.

147078

217(805)

143056

147079

52394 52083

448(830)

147320(850)

691(850)

Plate

8272

8282

8274 8274

8274

8276

NOTE:

8276

Nome

Thread

143196

Thread

Take-up

and

147053

Toke-up

Lever

Oil Guard with

Oil

Roller

Thread Take-up Lever Thread

Bushing

Threod Thread

50305(803)

Thread

Screw

Throat

147315,

Position,

Throat

this

Throat

Take-up Take-up

Take-up

Plate

No.54Drill,

Plate

Machine

Plate

Spring

Regulator

(small

needle

No. 5

No. 14 or No. 16

No. 147320(850)issent

unless

otherwise

Screw

(2)

Guard

Bearing(l8)

Regulator

hole)

Needle

specified.

Screw

Eyelet

with

Set

for

with

19

FOR

GENERAL

MIUM

HEAVY

MECHANISM. NEEDLE

8

PER

INCH.

This

Machineisthe

No.

147081

WEIGHT

BAR

MACHINE

STITCHING

FABRICS.

CLEARANCE STROKE

someasthe

foilowing

Plate

8270

NO.

OPERATIONS

UNDER

1-13/64".

exceptions:

Arm

Shaft

251.12

HAS

PENDANT

PRESSER

MAXIMUM

251-11

(horizontal)

ON

STITCH

Machine

N<

LIGHT

LINK

FOOT

with

and

TO

FEED

5/16".

LENGTH

the

Needle

Crank with 1036(830), 140542(830) and

140609(830),inplaceof147003

147085

147086

147163

147164

147113

147114

8273

8283

-

Side

Arm

Side

147008

Needle

size16X

Needle

143336

Needle

Shield,inplace

Shield

and

complete,

147085,inplaceof147010

Bar (hollow) in

Bar

147163

257

Needle

Bar

Bushing

Bar

Bushing

place

with

143386,

(lower) in

(lower)

of 147007

Nos.

16709,

of 147162

for

place

Threod

let,inplaceof52171

143327

8283

Needle

Bar

Thread

Guard

for

143386

665(809) 8283 Needle Bar Thread Guord Screw for

143386

143328

8283

140119(830) 8283

147144

8270

Needle

143327

Needle

143386

Needle

Oil

Wick

place

Clamp 143328 with 665(809) and

Clomp with 140119(830) for

Clamp Screw for 143328

Holder

with

two

147141,

of 147143

147346(850) 8277 Throat Plate (small needle hole) for

147315,

Needle, of

No. 54

No.2Needle

147320(850)

Drill,

No. 14 or No. 16

Positioninplace

ME-

Bar

of

Eye

in

20

MACHINE

FOR

GENERAL

WEIGHT

STITCHING

FABRICS

(3/8"

HEAVY WEIGHT FABRICS

PENDANT

PRESSER

IMUM

This

LINK

FOOT

STITCH

LENGTH

Machineisthe

FEED

3/8".

sameasthe

following

No.

147081

147085

147086

149174

140257(830)

147163

147164

147113

147114

143327

665(809)

143386

143328

140119(830)

147145

62527

127233

52390

26231

127234

147387

Plate

8271

8273

8278

8271

8284

8271

8278 8278 8278

8278 8278

NO.

251-13

OPERATIONS

PRESSER

(7/16"

MECHANISM.

NEEDLE

5.1/2

PER

BAR

INCH.

251-11

ON

BAR

PRESSER

CLEARANCE

STROKE

Machine

LIFT)

exceptions:

Nome

Arm

Shaft

Crank

140609(830), in Arm

Arm

147008

Feed

for

Feed

in

placeof140568(830)

Needle

size

Needle

143336

Needle

Eyelet,inplace

Needle

143386

Needle

143327

Needle

143386

Needle

Oil Wick Holder

(horizontal)

with

1036(830),

place

Side

Shield,inplace

Side

Shield

complete,

and

147085, in

Dog, 17

teeth

(14

143175(850),inplace

Eccentric

Stop Screw

Bar (hollow) in

Bar

16X257

Bar

147163

Bushing

with

and16x

(lower) in

(lower) Thread

of 52171

Bar

Clamp

Thread

143328

Guard

with

Clamp with 140119(830) for

Clomp

Screw

for

with

two

placeof147143

Presser

Presser Nos. 26231, 52390,

in

Thread Lever Lever

143056,inplace

Foot

Hinge

Foot

Plate

for

Shank

for

Spring for 127234

(spring

hinged)

62527

placeof147308

Take-up Crank, Thread Take-up

with 147079 and Thread Take-up

Link with 147193 and

of 147386

LIGHT

TO

AND

BAR

LIFT).

1.7/16".

with

the

and

Needle

140542(830)

of 147003

of 147007

Nos.

place

of 147010

teethtothe

of 147315

(5Hl

place

of 147162

143386,

261

Needles

place

for

143386

Screw

665(809)

143328

147141, in

for 127234

127234

complete,

and

127233,

eighteen

HEAVY

EXTRA

HAS

UNDER

MAX.

Bar

and

16709,

inch)

stitch)

for

of

....

for

and

PARTS

FOR

MACHINE

No.

251-13

21

No.

147198

147187

143175(850)

Plate

8278

Nome

Thread

Lever

147193

of

Lever

147197

Toke-up

with

Link

and

Crank,

147079

with

140231(803),

thirty-six

Thread

and

Thread

143056, in

Toke-up

Take-up

143058,

place

Thread Take-up Crank, Thread Take-up

Lever

with

Lever

Link

147079,

and

Thread

Toke-up

Lever

Link Hinge Stud complete, Nos. 147075

and 147198, in Throat

Plote

149174,inplace

pieceof147186

(large

needle

of 147320(850)

hole)

for

22

FITTINGS

pQr

Attaching

Cuff

(Setting Cuff)

For

No.

251-11

Machine

No.

149031

Plate

Name

8288 Feed Dog, 19 teeth (22 teeth to the

inch)

18055 8288 Presser poof Hinge Pin

143216

143217

143318 8288

8288

Presser

Foot

Plate

Foot

Shank

Foot Yielding Plote

143320 8288 Presser Foot Yielding Plate Spring

143219

147336(850)

147337 8288

665(809)

147338

8288 Presser Foot (hinged) long toes, with

right

hand

Yielding

18055, 143216, 143217, 143318

143320

Plate

complete,

and

8288 Throat Plate (small needle hole)

8288

Drill, No. 5 Needle

No.16Needle

Throat

Plate

Throot

Plate

Throot

Plate with

Nos.

665(809),

Position,

Cuff Guide

Cuff

Guide

Cuff

147336

Screw

Guide

and

No. 14 or

complete,

147337

For Banding

(Setting

For

No.

Collar

251-11

Band)

Machine

No.

Nos.

54

No.

147305

62527

147325

62926 26231

147326

Plate

8289

8289 8289

8289

N<

Feed

Dog, 28

inch)

Presser

Presser Presser

Presser

teeth

(22

teethtothe

Foot

Hinge

Foot Foot

Foot

Plate Shank

Spring

Foot (spring hinged) complete,

for 3/16 in., 7/32 in., ond

1/4

in. margin,

Nos. 26231, 62527, 62926 and 147325 ..

147309(850)

NOTE:

8289

When

ordering No. 147326, state margin

required.

Throat

Plate

Drill, No. 5 Needle

No.16Needle

(small needle hole) No. 54

Position,

No. 14 or

For

No.

For

Basting

251-11

23

Machine

No.

147305

62527

147306

147307

26231

147308

147309(850)

Plate

8289

8289 8289

8289

Feed

Dog, 28

inch)

Presser

Nos.

Throat

Foot

Foot (spring hinged) complete,

26231, 62527, 147306

Plate

Drill, No. 5 Needle

No.16Needle

Name

teeth

(22

teethtothe

Hinge

Plote

Shank

Spring

(small needle hole) No. 54

Position,

For Beading or Center Stitching

For

No.

251-11

No.

160675

1443(809)

160676

160677 8

147327

Plate

8290

Edge

8290 Edge Guide

8290

290

Edge

Edge Guide on

160675, 160676 and two 1443(809)

8290 Feed

160671 8290 Presser Foot Compensating 160672 8290 Presser Foot Compensating

1264(809)

160673

193252 8290

160674 8290

147328(850)

8290 Presser Foot Hinge

8290

Presser

complete, Nos. 160671, 160672, 160673

and

Throat

Drill, No. 5

16toNo.22Needle

Machine

Name

Guide

Screw

(2)

Guide

Shank

complete, Nos.

Dog,

23 teeth (22 teeth to the inch)

Screw

Foot

Shank

Foot Spring (2)

Foot (compensating, double)

two

each

1264(809)

Plote (large

Needle

needle

Position,

and

No. 14 or

Plate Plate

(2)

193252

hole)

from No.

147307

(left) (right)

No.

46

24

For Cuff Running

No.

147305

62527

147329

702(830)

1772(809)

147330

26231

147331

147309(850)

No.

(Edgestitching

For

No.

Plate

8291 8291 8291 8291 8291

8291

For

No.

Plate

Cuff)

25U11

Feed Dog, 28

Presser

Prasser

Presser Foot

Presser

1772(809)

Presser

1/16 in.

and 147330

Throat Drill, No. 5 Needle

No.16Needle

Hem

251*11

Machine

Foot Hinge

Foot

Foot Shank with 702(830) and Foot Spring

Foot (spring hinged) complete, for

margin,

Plate

Collar

Band

Machine

Name

teeth

(22

teeth

to the inch)

Plate

Adjusting Screw

Plate

Adjusting Screw Nut ..

Nos.

26231,

62527,

147329

(small needle hole) No. 54

Position,

Nome

No. 14 or

147321

62527

147322

62926

26231

147323

8291 8291

8291

Feed Dog, 15 teeth (22 teeth to the inch)

Presser

Foot Hinge

Foot

Plate

Foot

Shank

Foot Spring

Presser Foot (spring hinged) complete,

Nos. 26231, 62527, 62926 and 147322

147324(850)

8291

Throat Plate (small needle hole) No. 54 Drill, No. 5 Needle Position, No. 14 or

No.16Needle

For Interband Lining

For

No.

251-11

Machine

25

No.

147315

140896(830)

147316 147317 143320 147318 147319

147320(850)

No.

147315

62527

147306

147307

26231

147308

147388(850)

Plate

8292 8292 8292

8292

Plote

8298

8298 8298

8298

For

Feed

Presser

Yielding

for

3/32

gin

from

side,

147317

Throot

Drill,

No.16Needle

Pants

No.

251-12

Feed

Presser

Presser Nos. Throat

Drill,

Needle

N<

Dog, 28

teeth

(22

teethtothe

Foot

Hinge

Screw

Foot

Plate

Foot

Shank

Foot Yielding

Foot

Yielding

Foot

(hinged)

Plote

complete, for

in.

stitch

Plate

with

margin

Plate

Spring

right

1/16

and

centerofneedletoright

3/8

inch)

hand

In.

in. mar

hand

Nos. 140896(830), 143320, 147316,

and

147318

Plote

(small

needle

hole)

No. 54

No. 5

Needle

Position,

No. 14 or

Seaming

Machine

Name

Dog,28teeth

Foot

26231,

Plate

No. 2

Hinge

Plate

Shank

Spring

(spring

62527,

(smoll

Needle

(22

teethtothe

hinged) 147306 needle

Position,

inch)

complete,

ond 147307....-

hole)

No. 52

No.

19

step,

26

For

Pocket

No.

251-11

Setting

Machine

No.

Ploto

147315 8293

140896(830)

147332 147333

26231

147334

147335

140896(830)

147378 147333

26 23 1 147379 147380

8293

8293 8293

8293

8293 8293

140908(830) 8293

147381

147382

26231 147379

147383

147320(850)

8293

Feed

Dog, 28

inch)

Presser

Presser Presser

Presser

Yielding

step 26231,

and

Presser

Presser Presser Presser Yielding

step

26231,

and

Presser

Presser Presser

Presser Yielding step

26231,

and

Throat Drill,

No.16Needle

Foot

Plate

and

1/32

140896(830),

147334

Foot

Foot Foot

Foot

Plate

and

1/16

140896(830),

147379

Foot

Foot Foot

Foot

Plate

and

1/4

140908(830),

147382

Plate

No. 5

Nome

reeth

(22

Hinge

Screw

Plote

Shank

Spring

Yielding

(hinged)

complete, for

in.

stitch

Hinge

Screw

Plate Shank

Spring Yielding (hinged)

complete,

in.

stitch

Hinge

Plate

Shank

Spring Yielding

(hinged)

complete,

in.

stitch

(small

Needle

needle

Position,

teethtothe

Plate

with

right

margin,

147332,

Plote

with

right

for

margin,

147333,

Screw

Plate

with

right

for

margin, Nos.

147379,

hole)

hand

1/16

in.

Nos.

147333

hand

1/16

in.

Nos.

147378

hand

1/16

in.

147381

No.

No. 14 or

54

For

Pocket

No.

251-12

27

Setting

Machine

No.

147315

140896(830)

147332

147333

26231

147334

147335

140896(830)

147378

147333

26231

147379 147380

140908(830)

147381 147382

26231 147379 147383

147346(850)

Plote

8299

8299 8299 8299

8299 8299

8299 8299 8299 8299

8299

8299 8299

8299

Food Dog, 28

Presser

Presser Presser

Presser

Yielding step 26231,

147334

Presser

Presser Presser Presser

Yielding

step 26231,

147379

Presser

Presser Presser

Presser Presser Presser

Yielding

step

26231,

147382

Throat

Drill,

No.16Needle

Foot

Foot Foot

Foot

Plate

and

1/32

140896(830),

Foot

Foot Foot Foot

Plate

and

1/16

140896(830),

Foot

Foot Foot

Foot Foot Foot

Plate

and

1/4

140908(830),

Plate

No. 2

teeth

Hinge

Plate Shank

Spring

Yielding

(hinged)

complete,

in.

Hinge

Plate

Shank

Spring Yielding (hinged)

complete,

in.

Hinge

Plate Shonk

Spring Yielding (hinged)

complete,

in.

(small

Needle

Nome

stitch

(22

teethtothe

Screw

Plate

with

for

margin,

147332,

Screw

Plate

with

for

margin,

147333,

Screw

Plate

with

for

margin,

147379,

needle

Position,

right

1/16

147333

right

1/16

147378

right

1/16

Nos.

147381

hole)

No. 14 or

inch)

hand

in.

Nos.

and

hand

in.

Nos.

and

hand

in.

and

No. 54

28

For Running Collars

For

No.

251-11

Machine

No.

Plato

147305 8294

62527

147310

147307

8294

26231 8294

147312 8294

147309(850)

No.

147305

62527

147306 147307

26231

147308

147374(850)

8294

Plate

8298 8298

8298

8298 8298 8298

8298

Feed

Presser

for

147307

Throat

Drill,

No.16Needle

For Running

For

No.

251-12

Feed Presser

Presser

Nos.

Throat

Drill,

No.16Needle

Nome

Dog, 28

Foot

teeth

Hinge

Plate

Shank

Spring

(22

teethtothe

Foot (spring hinged) complete,

3/16

in. margin, Nos. 26231, 62527,

and

147310

Plate

(small

needle

No. 5

Needle

Position,

Collars

Machine

Name

Dog, 28

26231,

No. 2

Foot

Foot Foot

Foot

Plate

teeth

Hinge

Plate Shank

Spring

(spring

62527,

(small

Needle

(22

teethtothe

hinged)

147306

needle

Position,

hole)

No.14or

complete.

and

147307

hole)

No. 14 or

inch)

No. 54

inch)

No. 54

For

No.

149603

26606

151435

Sleeve

For

No.

Plate

8295

NOTE: For component

Feed

Throat

Puller

147344,

complete

251-11

Dog, 20

Binding

Machine

teeth

Plate

Feed

Device

150733

and

portsofPuller

No. 151435,

Name

(16

teethtothe

complete,

151434

see

Page

Nos.

Feed

No. 30

inch)

Device

For

Sleeve

Ho.

251-11

29

Plackets

Machine

No.

147315

147369

147370

160673

140904(830)

193252 147371

147320(850)

No.

147315

147369 147370

160673

140904(830)

193252 147371

147346(850)

Plate

8294 8294

8294

Plate

21251 21251

21251 21251 21251 21251

21251

For

Feed

Dog, 28

Presser

Nos.

147369,

each

140904(830)

Throat

Drill,

No.16Needle

Sleeve

No.

251-12

Feed

Dog, 28

Presser Presser

Presser

Nos.

147369,

each

140904(830) Throat Drill,

No.16Needle

Foot

Plate

No. 5

Plackets

Machine

Foot Foot

Foot

Plate

No. 2

N(

teeth

(22

Compensating

Compensoting

Shank

Hinge

Spring

(2)

(spring

147370,

(small

Needle

teeth

hinged)

and

needle

Position,

Nome

(22

160673 193252

Compensating Compensating

Shank

Hinge

Spring

(2)

(spring

hinged)

147370,

and

(small

needle

Needle

Position,

teethtothe

Plote

Plate

Screw

complete,

ond

hole)

No. 14 or

teeth

to the inch)

Plate Plate

Screw

complete,

160673

and

193252

hole)

No. 14 or

(left)

(right)

(2)

two

No.

(left)

(right)

(2)

two

No.

inch)

54

.....

54

30

For

First

For

No.

Shoulder

251-11

Joining

Machine

No.

Plate

149057 8296 Feed Dog, 21

62527 8296

147339

62926

8296

26231 8296

147340 8296

142060(850) 8296 Throat

Presser

for

1/4

62926

Drill,

Needle

Foot Hinge

Foot

Foot Spring

Foot (spring hinged) complete,

in. margin, Nos. 26231, 62527,

and

Plate

No. 5

For Second Shoulder Joining

and Stitching Down

For

No.

149057

18055

143216

143217

143318 143320 143219

142060(850)

Plate

8296

8296 8296

8296

251-11

Feed

Presser

right

18055,

143320

Throat

Drill,

Needle

Machine

Dog, 21

Foot

Foot Yielding

Foot (hinged) long

hand Yielding

143216, 143217,

Plate

No. 5

Name

teeth

(22

teeth

to the inch)

Plate

Shank

147339

(small needle hole) No. 53

Needle

Position,

No. 18

Collar

Name

teeth

(22

teethtothe

Hinge

Plate

Shank

Plate

Spring........

toes

with

Plate

complete,

143318

and

(small

needle

Needle

Position,

hole)

No. 18

inch)

Nos.

No. 53

31

No.

149137

62527

147313

62926

26231

147314

143278(850)

No.

For Top Stitch

Collors

(Edgestitchlng)

For

Ho.

Ploto

8297

251-11

Food

Dog,

Machine

1/8

inch)8tooth

noodle

8297 8297

8297

8297 8297

8297

Prosser

Prossor

Prosser

Prossor

for

62926

Throat

Foot

3/32

in. margin, Nos. 26231, 62527,

and

147313

Plato

For Top Stitching Slosh

on

Ivy

Plato

For

No.

League

251-11

Pants

Machine

in.

front

Hingo

Plato

Shank

Spring

(spring

(small

Pockets

Nome

stitch

(22

and5tooth

hinged)

noodle

Name

toothtothe

back

comploto,

hole)

of

147315

26276

147347

702(830)

1772(809)

147348

26231

147349

147320(850)

8297 8297 8297

8297

8297 8297

8297

Food Dog, 28 tooth (22 tooth to

Prossor

Prosser

Prossor

1772(809)

Prossor Prossor Nos.

Throat

Drill,

No.16Noodle

Foot

26231,

Plato

No. 5

Hingo

Plate

Plato

Shank

Spring (spring

26276.

(small

Noodle

Adjusting

with

hinged)

147347

noodle

Position,

Screw

Screw Nut

702(830)

comploto.

and

hole)

No. 14 or

the

and

147348

No.

inch)

54