Singer 247-4, 247-5 User Manual

Form

20600

(752)

PrintedinU.S.A.

LIST

OF

PARTS

MACHINES

Nos.

THE SINGER

247-4

SiS5f«ATRADE

MANUFACTURING

and

MARK

OF

247-5

COMPANY

INSTRUCTIONS

FOR

OILING

To ensure easy running and prevent unnecessary wear of

the parts

oiling

which

are

in movable contact, the machine requires

and

when in continuous use,

"TYPE

B" or

"TYPE

D" OIL,

sold only by Singer Sewing Machine Company, should be

applied at least twice each doy to all oil holes marked

"OIL," as instructed in Form

"TYPE

D"

OILisstainless.

20429.

The letter

beatthe top.

"O,"

This

to the inner end of

Copyright,

The

SPECIAL

NOTICE

marked on oil pipe couplings must always

is to insure that the oil spoon, attached

each

coupling, is open side up.

Singer

U. S. A., 1948

Manufacturing

and

for

All Countries

1952 by

Company

INDEX

Page

Accessories

Belt

Guard

Bench

Stand

Chip Chute 26

Foot

Lifter

Parts

Fittings for 247-4 Machine 23

Fittings for 247-5 Machine 24

Knee

Lifter

Parts

Machine

Numerical

Thread

Base

No.

ListofParts

Unwinder

247-4

247-5

26

27

7

15

29

28

INSTRUCTIONS

FOR

ORDERING

In ordering from this list, use ONLY the part NUMBER in

the

FIRST

Column.

The number stamped on a Sewing Machine Part is in every

case the number of the single part only.

Every

combination of parts sent out as such has its specific

number, which, although not stamped on the parts, must be used

when ordering

Each number always indicates

the

combination.

the

SAME PART in whatever

list it appears, or for whatever machine.

The letters after some of the numbers indicate

the

style of

finish only, as follows:

A-Hardened, Polished, Nickel Plated and Buffed.

A.A-Buffed

and

Chromium

Plated.

A.B-Hardened, Polished, Buffed and Chromium Plated.

A.C-Brown Baking Enamel Finish.

A.D-Gray Baking Enamel Finish.

A.E-Hardened, Bright Rumbled and Nickel Plated.

A.F-Hardened, Bright Rumbled, Nickel Plated, Bright

Chromium

A.G-Alumilite,

A.H-Alumilite

Plated.

Plain.

Dyed.

Rumbled

and

A.J-Polished, Nickel Plated and Chromium Plated.

A.K-Hardened, Polished, Nickel Plated and Chromium Plated. A.L-Heat Treated for Toughness.

B-Polished, Nickel Plated and Buffed.

C-Hardened

C.R'Hardened

D-Polished

only.

and

Only.

Meriized.

E-Soft, Not Polished.

F-Hardened

F.J-Hardened,

G-Bright

H-Blued.

J-Nickel

K-Hardened

L-Brass M-Oxidized.

and

Polished.

Polished and Nickel

Rumbled and Nickel

Plated

Only.

and

Nickel

Plated.

N-Japanned, Dull.

INSTRUCTIONS

FOR

ORDERING

-

Continued

P-Japanned, Bright.

P.P-Wrinkle

R-Merlized. S-Cadmium

Finish.

Plated.

T-Copper Plated.

T.A-Hardened, Polished; Copper and Nickel Plated and Buffed.

T.B-Copper and Nickel Plated and Polished.

T.J-Copper

and Nickel

Plated

Only.

T.K-Hardened, Copper and Nickel Plated.

T.L-Copper and Brass Plated.

T.M-Copper

U-Zinc

V-Silver

W-Polished

X-Black Oxide/ for Iron and

X.C-Nardened and Black

Y-Black

Z-Chromium

Plated

Plated.

Nickel

and Oxidized.

and

Nickel

Plated

Plated.

Oxide,

Only.

Steel.

for Iron and

Steel.

Z.A-Hardened, Polished, Nickel Plated, Buffed and Chromium Plated.

Z.B-Polished, Nickel Plated, Buffed and Chromium Plated.

Z.C-Hardened

Z.D-Polished

Z.G-Bright

Plated.

Z.J-Nickel

and

Rumbled,

and

Chromium

Plated.

Nickel Plated, Bright

Plated.

Rumbled

and

Chromium

Z.T-Copper and Chromium Plated.

These

letters

MUST BE USED when they appear in

and

After

In

the

this

series:

I to

1500,

Screw

Numbers.

1501

to

1800

1801to2000

2001

to

50000

number

as in

50001to51500

and

51501

51801

52001

are Sewing Machine Parts, 190001 and

of

Electrical

Parts.

the

to

list.

51800

52000

140000

and 140001 to

are

Nut

are

Roller

and

142001to190000

upward

the

142000

Numbers.

are numbers

list;

The figures in the second column refer only to the plates,

TO

illustrating the parts, and are NOT

Parts marked with an asterisk

(41)

BE USED in ordering.

are furnished only when repairs

are madeatfactory.

When

between

ordering

seams)

parts

the

Gauge,aswell

which

differ as to

asthe

Number

Gauge

(the

distance

mustbegivenonorder.

are

SINGER

These

Company's

Needles

in SINGER

Needles

are

marked

Trade

Mark

should

Machines

and

their

with

"S(MANCO.*''

be

used

Containers

the

NeedlesinContainers

"FOR

SINGER

are

NOT

SINGER

marked

MACHINES"

made

needles.

LIST

OF

PARTS

FOR

COMPLETE

MACHINE

FOR

SEAMING

AND

SIMILAR

VERTICAL

ING.

NEEDLE BAR

PRESSER

CENTER NEEDLES FROM

1/16"

1/8"

TO

TANCE BETWEEN OUTSIDE NEEDLES IS

2800

DEPENDING

ATION

68428 68429

1057AL

50608R

139017

68350 131864 131865

131866

131319 168111

1309C

131056

68433

68435 131095

68436

131072

50083AL

131456

42365

54969

1235F 168002 168003 131366

446AL

423AL

453AL

25551

25551 25551 25551

25551 25552

25553 25553

25553

25552 25552

25552 25552 25552

25552

25552 25553

25553

25552

25553

CHILDREN'S WEAR, DRESSES, TROUSERS

WORK.

TRIMMER.

FOOT

AND

1/4",

PERFORMED.

DIFFERENTIAL

STROKE

5/32".

BETWEEN

IN STEPS OF

UPON

Arm,

upperend

131022

Arm

Bottom

Arm Bottom

Arm Hole Plug Screw, (or access to Crank Connecting Rod

(upper bearing)

Arm Hole Plug Screw

Arm Oil Cup, for oiling Arm RockShaft Front Bearing Arm Oil Cup, for 131866 Arm Oil Cup Oil

ArmOil Cup withOil

reservoir,

Arm Oil Cup Oil Pad for

Arm

Rock

50505C

Arm RockShaft Adjusting Screw Arm RockShaft Adjusting Screw Washer

Arm Rock

Arm

Rock

Arm RockShaft Bushing(back) Arm RockShoft Bushing(bock) Set Screw

Arm Rock Arm Rock

Arm RockShaft Crank, back (ball bearing, solid) with two

50083AL

Arm RockShaft Crank (back) Set Screw (2)

Arm Rock

Arm RockShaft Flanged Bushing (front) Set Screw

Arm Rock Arm Rock Arm Rock Shoft Oil Plug Screw Arm Rotary

Arm Rotary Shaft 168002 with 131930 Arm Rotary ShaftBall Bearing (back) (2)

No.

247-4

THREE NEEDLES.

1.7/32".

GAUGES

1/16"

CENTER

MATERIAL

lower

Cover

Gasket

Cover

Screw

FEED

CLEARANCE

BETWEEN

TO

AND

1/16".

Name

(solid)

TWO

FOR

1/4"

(4)

LEFT

IN STEPS OF

RIGHT

MAXIMUM

3/8".

USED

AND

with

948J,68483and four

(cork)

LOOPERS.

GATHER

UNDER

NEEDLES

Washer

Gauge

Nos.

131864

Shaft

and

131819

Shaft

Bushing

Shaft

Bushing

Shaft

Bushing (intermediate)

Shaft

Bushing (intermediate) Set Screw

Shaft

Flanged

Shaft

Oil Pad for oiling Back Bearing

Shaft

Oil Pad for oiling Intermediate Bearing

Shaft

with

complete, for fillingoil

and

131865

68350

Front

Crank

(back)

(back) Cap

Cap

Bushing (front)

168215

with

853AL,

Washer

and

AND

DIS

SPEED

OPER

168010

1235F,

(fiber)

,v..

8

No.

131478 131479

131526

131369

131370

131480 131366 131481

1304C

131482

131959

68497 68483

131028

131457

42367 54218

168215

131276 131909

131280

1289X

131910

131911

68448

1057AL 168067 168068

6465

168300

lOllF

168071

38419

168072

168301

lOllF

131926

205C

429C

457AL

948J

761E

144D

74C

671W

164E

665J

742F

PARTS

FOR

MACHINE

Plate

25553

25553 25553 25553

25553 25553 25553 25553 25553

25553

25553 25553 25553

25553

25553 25553

25553 25553 25551 25551 25551

25551

25551 25551

25555

25555 25555 25555 25555

25555

'25555

25555 25555 25555

25555 25555

25555 25553

NOTE:

ArmRotaryShaft BallBearing(back) Case

Arni

Rotary

Shaft

131369

Arm

ArmRotoryShaft BallBearing(back) Case Cap

Arm

Arm RotaryShaft Ball Bearing (back) Case Set Screw

ArmRotaryShaft BallBearing(back) Spacing Collar ArmRotaryShaft BallBearing(intermediate)

ArmRotaryShaft BallBearing (intermediate) Case ArmRotary Shaft BallBearing (intermediate) Case Set

ArmRotoryShaft BallBearing(intermediate) Collarwith

Arm RotaryShaft BallBearing (intermediate) Collar Set

Arm Rotary Arm Rotary

Arm Rotary Shaft Bushing(front) Bracket with761E Arm RotaryShaft Bushing(front) BracketScrew Arm RotaryShaft Bushing(front) Oil Plug Arm RotaryShaft Bushing(front) PositionScrew

Arm Rotary ShaftBushing (intermediate) Arm Rotary Shaft Bushing (intermediate) Position Screw Arm Rotary ShaftBushing (intermediate) Oil Pad (lower)..

ArmRotaryShaft

Arm Rotary Shaft Oil Wick Arm Rotary Shaft Screw

Arm

ArmSide Cover ArmSide Cover

ArmSide CoverCop Screw

ArmSide CoverCap Spring ArmSideCover (oilvent)complete, Nos. 1289X,131276,

Arm

Chip Chute

Chip Chute Arm Chip Chute ArmHinge Screw

Chip ChuteArm HingeScrew FrictionWasher

Chip Chute Arm LockThumb Screw

Chip Chute Screw (2)

Cloth Plate (sectional)with two 101IF

Cloth Plate Connecting

Cloth Plate Slide

ClothPlate SlideSpring

Cloth PlateSlide Spring Screw (2) Cloth Plate Slide complete, Nos. 38419,168071 and two

ClothPlate (sectional)complete,Nos. 168072and 168300.

Cloth Plate Screw (left) (2)

Cloth PlateScrew (right)

Crank ConnectingRodwithtwoeach

WhenNo.

Arm

All

for which it is required, in order to obtain correct Needle Bar

Stroke.

and

Rotary

Shaft

Bearings

complete,Nos.131479,131480and two

131366

RotaryShaft BallBearing(back)Case Cap Screw(3)...

Rotary

ShaftBall

(3)

Screw

two

457AL

Screw

(2)

Shaft

Side

Cover

131280,131909

Side

Cover

Side

Cover Screw (4)

665J

131927

and

131926

Rock

Shaft Crank (back) fitted together willbe furnished.

Agency

orders for the part

No.

247-4

Name

Ball

Bearing

three

205C

Ball

Bushing (front) Bushing (front) Bearing Oil Pad (wick)

Bushing

(oil vent)

Cap Cap

and

Gasket

(back)Case 131478

Bearing

(back)Case

Bearing

(back)Case

(intermediate)Oil Pad (upper)....

PositionPin

131910

Block

Screw (2)

1057AL,

131928

isrequiredfor repairs.

must

Connecting

state the

with

Ball

Position

51715AL,

Machine

with

Stud

Rod

and

No.

PARTS

FOR

MACHINE

No.

247-4

No. 131930 131927

51715AL

131928

1057AL 131760 131761

330J

131762

29234

1053E

50190W

168074 131766

889AL

168076

157J

50429AL

147568

147569

51408AL

147570

147571

131769

704E

131770

1147AL

190J

131500

168010

896AL

1057AL

131772

59343

735AL

68497

134260

51061AL

7071

217J

138306

168011

168012

624AL

1103C

131773 168304

131775

57235

453AL

1036AL

131776

131777

Plate

25553 25553 25553

25553

25556

25556 25556 25556

25558 25558 25558 25558

25565 25558 25558 25558 25558

25558 25558 25558

25558

25565 25553

25553 25553

25558

25558 25558 25553 25553

25553

25553 25553 25558

25558 25558

25558

25558 25558

Crank

Connecting Rod

Crank Connecting RodCop (lower)Screw Stud (2)

Crank Connecting RodCop (lower) Screw Stud Nut (2)....

Crank Connecting RodCap (lower)ScrewStud Nut

Washer

Crank Connecting Rod

Face

Plate Plate

Face Face Plate (lower half) Screw (2)

Face Plate (upper holf)

Face Plate (upper half) PositionPlate

Face Plate (upper half) Position Plate Screw Face Plate (upper half) ThumbScrew

Feed

(back)

Feed (back) Bar Hinge Pin

Feed (back)Bar Slide

Feed

(back) Dog (See Fittings

Feed

(back) Dog Screw

Feed (bock) Dog Stop Screw

Feed

(front) Bar

Feed (front) Bar Feed Dog

Feed (front) Bar complete, Nos. 51408AL, 147568

147569

Feed

(front) Bar

Feed

(front) Bar

Feed

(front) Bar

Feed

(front) Bar Slide Bar

Feed (front) Bar Slide Bar Set Screw

Feed (front) Dog (See FittingsPage Nos. 23

Feed (front) Dog Screw

Feed

Connecting

two

896AL

Feed

Feed Feed Feed Feed Feed Feed Feed Feed

Feed Feed

Feed

two

each

Feed

Lifting Eccentric with

Feed Lifting EccentricSet Screw (3)

Feed Regulating Screw

Feed

Rocking

Feed RockingFrame 131773 with 61C, 704E, 1655E,

51700C,

131780,131781,

Feed RockingFrame Hinge Pin

Feed

Rocking Rocking

Feed

Feed RockingFrame Hinge Pin Set Screw (2) Gathering Feed Actuating Lever

Gathering Feed ActuatingLeverBracketwith 175C,

and

two

Nome

131926

(2)

Cap

(lower half) (lower half)

(upper) Screw(2)

Gasket

Bar with 620AL, 1147AL

Set

Screw

Block

(twopieces)

Page

Seat

147570

with

Guide Guide

131769

Screw

Rod with 1057AL,

217J, 7071

Frame

59343,131766,

FrameHinge Pin Frame Hinge Pin

and

three

with 889AL

131772,131775, 131779,

14031IC,

147571

Bushing Bushing

1735C

with 131072

(cork)

and

Nos. 23

(adjustable)

Screw

and

68497,134260

51061AL

624AL

and

two 1036AL

and

(2)

Set Screw(2)

50429AL

and

131770

and

168074

Lock

24)

and

24)

and

910AL,

10

PARTS

FOR

MACHINE

No.

247^

No.

131867

50183F

131778

131779

1057AL

131780

140311C

51700C

131781

1655E

168080

lOOOC

168081

42038

42039

42041 168082 168187

168083

168084

54369

1178C

20437 168085 132583

132584

168086

1722J

14017

168087

1756J

168088

168089

168090

448AL

1253AL

172J

1520J

359C 1654C 1654C 9525

170C 1226C

91 GAL

1735C

175C

1735C

61C

621E 336F

172E

456AL

620AL

Plate

25558

25558 25558 25558 25558 25558 25558 25558

25558 25558 25558 25558 25558 25558 25558 25558 25558

25558

25558 25558

25560

25560 25560

25560

25560 25560 25560

25560

25560 25560 25560 25560 25560

25560

25560 25560

25560

25560 25560

25560 25560 25560

Gathering Feed Actuating Lever Bracket 131777 with

Name

359C,

1226C,

1520J,

1654C

Gathering Feed Actuating Lever Bracket Screw (2)

Gathering Feed Actuating Lever HingeScrew

Gathering Feed Actuating Lever Hinge Screw Nut

Gathering Gathering Gathering Gathering

Gathering Feed Actuating LeverSpring Gathering Feed Actuating LeverSpring Screw Stud (lower).

Gathering Feed Actuating

Gathering Feed Actuating LeverStop Screw (lower)

Feed Feed Feed Feed Actuating Lever LockingScrew

9525,50183F,

Actuating Lever LockingScrew

Actuating Lever LockingScrew Lock Nut....

Actuating Lever LockingScrew Nut

Lever

131776

and

two

Washer

Spring Screw Stud(upper).

Gathering Feed ActuatingLeverStop Screw(lower)Nut

GotheringFeed Actuating

GatheringFeedActuating

Gathering Feed Regulator with two 1057AL

Gathering Feed RegulatorClompingScrew(2)

Gathering Feed Regulator Connection

Gathering Feed RegulatorConnectionHinge Screw(back).. Gathering Feed RegulatorConnectionHingeScrew (back)

Nut

Lever

StopScrew(upper)

Lever

StopScrew(upper) Nut

Gathering FeedRegulatorConnection HingeScrew(back)

Nut

Washer

Gathering FeedRegulatorConnection HingeScrew(front)..

GatheringFeedRegulator

Nut

Knife (movoble)

Knife

(movable)ClampingScrew

Knife (movable) Holder with Knife (movable) Holder Guide with 336F

Knife(movable) Holder Guide Plate

Knife

(movable)HolderGuide PlateScrew(2)

Knife(movable) Holder Guide Screw

Knife

(movable)HolderSpring

Knife(movable) Leverwith 1178Cand 20437

Knife

(movable)

and 168086

Knife

(movable)

Knife

(movable)

Knife

(movable)

Knife

(movable)

Knife

(movoble)

Knife

(movable)

Knife

(movable)

Knife

(movable)

Knife

(movable)

132584(2)

Knife

(movable)

(wick)

Knife

(movable)

(2)

Knife

(movable)

Knife

(movable)

Knife

(movable)

Knife

(movable)

Knife

(movable)

Knife

(stationary)

Knife

(stationary)

Knife

(stationary) Holder

Knife

(stationary) HolderSet Screw

Knife

(stationary)Set Screw

(2)

Lever

Lever Lever

Lever

Lever Lever

Lever Lever Lever

Lever Lever Lever Lever

Lever

Clamping

Connection

HingeScrew

(front)

lOOOC

168082with1722J,14017,132583

BearingArm Bearing

Arm

Bearing

Clamping

Clamping Connecting

Connecting Connecting Connecting

Connection Connection Connection HingeScrewStud HingeScrewStudNut

Bracket

Arm

Bracket

Arm

Collarwithtwo

Arm

Collar

Screw

Link

Link Link Link

with

620AL Nut NutWasher

Screw

Set

Washer

Hinge Hinge Hinge

Screw

Pin Pin Pin

(2)

465AL..

(2)

with OilPad

Set

Screw

Plate

No.

168195 168196

208AL 168197 168016 168208

168238 168017 168018

1057AL

68497

1231E

1497C 168012 168019 132583

132584

223C

168020 168021

168022

448AL

168023

624AL

168024 168025

168205

175C

140159AL

168026

50138E

1036AL

131504

51119J

1120AL

131914

51283AL

131497

131291

1133E

64320

1133E

168030

168031

68489

1520J

131270

861C

Plate

25561 25561 25561 25561 25561

25561 25561 25561

25553

25561

25561 25553 25561 25561

25561

25553 25561 25561

25561

25561 25561

25561

25553

25553 25556

25556

25556 25556

PARTS

FOR

MACHINE

Looper

(back)

Looper (front)

Looper(front)Screw (2) 1 Loopers

complete, Nos.168195,168196 and two

Looper Carrier Looper Carrier 168016 with132583,168019,168020,

168021,

LooperCarrier 168208 with168017 and 168205.

LooperCarrier Shaft with123IE LooperCarrier Shaft Crank with two LooperCarrier Shaft Crank ClampingScrew (2)

LooperCarrier Shaft Oil Pad LooperCarrier Shaft Plug Screw

LooperCarrier Shaft SetScrew Looper(avoiding motion) Looper(avoiding motion) Looper(avoiding motion)

Looper(avoiding motion) Looper(avoiding motion) Looper(avoiding motion)

Looper(avoiding motion) Looper(avoiding motion)

Looper(avoiding motion) EccentricConnection Holder Looper(avoiding motion) EccentricConnection Holder

Looper(avoiding motion)

Looper (driving) Eccentricwith three 1036AL

Looper(driving) EccentricConnection with twoeoch 175C Looper(driving) EccentricConnection 168025 with50138E, Looper(driving)EccentricConnection Cap (lower)Screw

Looper(driving) Looper(driving)

Looper(driving) EccentricConnection PositionPlate Screw.. Looper(driving) EccentricSet Screw (3)

LooperHolder with 1120AL

LooperHolderScrew

Looper Set Screw

Machine DrivingPulley"V" Beltgroove (outside diam. of

Machine DrivingPulley Set Screw (2)

Needle

Needle Bar complete, (See Fittings Page Nos. 23

Needle

Needle Bar Bushing (lower) Set Screw

Needle BarBushing(upper) Needle BarBushing(upper) Set Screw

Needle

Needle Bar Connecting Link168030 with68489

Needle Bar Connecting Needle Bar Connecting Needle Bar Connecting

Needle Bar Connecting

and

with

132584

Oil

Wick

Set

Screw

Screw Bushing ,

Screw Bushing Bearing

Screw Bushing Set Screw (2)

Thrust

Bearing

and

140159AL

168018,168024

(2)

belt

groove 2.9 in.) with two 51283AL, for

belt

Bar (hollow)

Bar Bushing (lower)

Bar Connecting Link

131492.;

No.

247-4

Name

168023

(wick)

Eccentric

withthree

Eccentric

Connectionwith 223C...

Eccentric

ConnectionHingePin

Eccentric

ConnectionHinge Pin

Eccentric

ConnectionHingePin

Eccentric

ConnectionHolder.

Eccentric

ConnectionHolder

Eccentric

ConnectionHolder

Eccentric

SetScrew (3)

and

168026

Eccentric

ConnectionCap (upper) Screw

Eccentric

Connection

Link

Hinge Stud (hollow)

Link

Hinge Stud Nut

Link

Hinge Stud Oil Pad (wick)

Link

Hinge Stud Oil Plug Screw

1057AL

Position

624AL

Plate

3/8

208AL

in. "V"

and

11

24)...

12

PARTS

FOR

MACHINE

No.

247-4

No.

853AL 25552 Needle Bar Connecting LinkHinge Stud Set Screw

131492 25556 Needle BarConnecting Stud with 1492E

1492E 25556 Needle Bar Connecting Stud Clamping Screw

168035

51369E 51047C

7071

904AL

906AL

68492

68493

176E

68494

198E

68495

68496

1733

68497

168036 168037

131004

131798

1733

168038

168039

131003

198E

131004

1733

68497

168040

131004

1733

131089

168097

330J

168042

54038

190J 217J

131912

38456

1133E

131799

11173

453AL

131402

168043

161J

802X

131749

38468

Plate

25565

25565 25556 25556 25562

25562 25562

25562

25562 25562 25562 25562

25562

25562 25562

25562

25555

25555 25555 25555

25556 25556

25556

25556 25556

25556

25563

25551

Name

Needle Clamp (See FittingsPoge Nos. 23 and 24}

Needle

Guard

24)

Needle Needle

Needle

Oil Pipe (back of arm) with68497, for oiling Feed Rocking

Frame Hinge PinFront Bearing

Oil Pipe (back of arm) Clamp

Oil Pipe(back ofarm) ClampScrew

Oil Pipe (back ofarm) Connection with68495 and two

198E,for oilingFeed

Bearing

Oil Pipe(back of arm)ConnectionCap Screw(2)

Oil Pipe (back of arm) Connection Oil Pad (wick)

Oil Pipe(back ofarm) Coupling Oil Pipe(bockof arm)Coupling Nut(brass)

Oil Pipe (back of arm) Oil Pad (wick) Oil Pipe (front of arm, long) withtwo 1733

Oil Pipe (frontof arm, long)complete, Nos.168036,

168038

Oil Pipe (frontof arm, long)Coupling(left)

OilPipe(frontof arm,long)

Oil Pipe (frontof arm, long)Oil Leadwith1733, and

131003,

Oil Pipe (front of arm, long) Oil Lead with68497 and

131003,for oilingFeed ConnectingRod

Oil Pipe(frontof arm, long) OilLead Connectionwithtwo

198E,for 168038

Oil

Pipe

Screw (4)

Oil

Pipe

Oil

Pipe

Oil

Pipe

Oil Pipe (frontof arm,short)with131089 and two1733

Oil

Pipe

Oil

Pipe

Oil

Pipe

Oil

Splosh

Oil

Splash

Oil

Splash

Oil

Splash

Oil

Splash

Oil

Splash

Presser Presser Presser

Presser

Presser Presser

Presser

(movable) (See Fittings

Guard

(movable)

Guard

(movable)

Guard

(movable)

Guard

(movable) Screw

Set

Screw (back) (2)

Set Screw (front)

and

168039

for

oiling

(front

ofarm,

(front

ofarm,

(frontofarm,

(front

ofarm,

(frontofarm,

Guard

Screw

Guard

(sideofarm)

Guard

(sideofarm)

Guard

(sideoform)

Guard

(hollow) Bushing Bushing

Lifting

Lifting Lifting

Lifting

Spring

(sideofarm)

Bracket

Bracket Bracket

Bracket

Lever

(auxiliary)

Stud

Bar Bar Bar

Bar

Bar Bar

Bar

Rocking

Arm

and

long)

short)

(2)

(upper) (upper)

Extension

Hinge

Holder Holder

Screw

Washer

Frame HingePin Back

Coupling Coupling

Rotary

Shaft

168039 (2)

Oil

Lead

Oil

Lead

Oil

Lead

Oil

Lead

Coupling

Oil

Pad

Holder Holder Screw

Set

Screw

with

453AL

Guide Guide

Set

Screw

Set

Screw

(wick)..

Page

Nos. 23

(right) Nut(brass)(2)

Front

Bearing

Connection

Coupling

Nut

OilPad

(wick)

(2)

Nut

(brass)

Screw

(2)

and

Cap

(brass).

(2)

PARTS

FOR

MACHINE

No.

247-4

13

No.

168044

176J

269W

1637J

131752

168046

208AL

2102

51570C 32572 54988 50326C 59539

131740

59537 59538 54279

168047

335J

2102

51570C

140113C

131809

131740

59537 59538

131696

54245

376J

2102 51570C 32572

54988

54246

54047

54048

624AL

68261

316C

1547J

50326C 59539

131741

59537 59538 54279

168144 168209

50624E

131811

131812 131868

1057AL

212J

131813

226C

131814

171AL

Plate

25551

25565 25551 25551 25551 25556 25556

25563

25563 25563

25556 25556 25563 25563 25563

25563

25563 25563

25563

25563 25563

25563 25563 25563 25563 25563 25563 25563 25563

25563

25563 25563 25563 25563 25563 25556 25556 25556 25556

25556 25556 25556

25556 25556

25556

Presser BarSpring complete, Nos. 269W, 1637J, 131749,

131750

Presser Foot complete (See FittingsPage Nos.23 and 24)...

Presser

Foot

Pressure Regulating Thumb Screw

Pressure Regulating Thumb Screw LockNut

Pressure Regulating ThumbScrew Washer

Tension

(thread covering)Controller Eyelet

Tension(thread covering) Controller EyeletScrew

Tension(thread covering) Disc(2) Tension (threadcovering) Regulating ThumbNut

Tension(thread covering) Releasing Disc....

Tension(thread covering) Releasing Pin Tension(thread covering) Screw Stud Tension (threadcovering) Screw Stud 50326C with51570C.

Tension

(thread covering)Spring Tension(thread covering)Spring Tension(thread covering) Spring

Tension(thread covering) Thread Guide (double) Tension(thread covering) Thread Guide Tension(thread covering) Thread Guide Screw

Tension (under thread) Disc (4) Tension (underthread) Regulating Thumb Nut (2)

Tension

(under

Tension

(under

(2)

Tension(under thread) Spring (2)

Tension(under thread) Spring Bushing(large) (2)

Tension(under thread) Spring Bushing(small) (2)

Tension

(underthread)Thread Guide(double)(2)

Tension(upper thread) Bracket Tension(upper thread) Bracket Screw Tension(upper thread) Disc(6) Tension(upper thread) Regulating Thumb Nut (3) Tension(upper thread) Releasing Disc(3) Tension(upper thread) Releasing Pin (3) Tension(upper thread) Releasing Shaft Tension(upper thread) Releasing Shaft Crank with 624AL... Tension(upper thread) Releasing Shaft Crank Tension(upper thread) Releasing Shaft Crank Set Screw

Tension

(upper thread) ReleasingShaftSpring Tension

(upper thread) ReleasingShaftStop Screw Tension

(upperthread) ReleasingShaftStop ScrewNut

Tension(upper thread) Screw Stud (3)

Tension

(upper

(3)

Tension(upper thread) Spring (3) Tension(upper thread) Spring Bushing(large) (3)

Tension

(upper thread) Spring

Tension(upper thread) Thread Guide (double) (3)

Tension(upper thread) Thread Separator

Thread Carrying Finger

Thread Carrying FingerClamping Screw

Thread Carrying Finger Holder (segment) with 50624E

Thread Carrying Finger Holder Bracket

Thread Carrying Finger Holder Bracket 131812 with 212J,

226C,

131811,131813

Thread Carrying Finger Holder Bracket Screw (2)

Thread Carrying FingerHolder Cap Screw

Thread Carrying Finger Holder Slide Block

Thread Carrying FingerHolder Slide

Thread

Carrying

171AL

Thread

Carrying

Clamping Screw

Name

and

131752

Screw

thread)

Screw Stud (2)

thread)

Screw

thread)

Screw

and

Finger Holder Slide Block

Finger HolderSlide Block

Bushing

(large)

Bushing

(small)

Stud

140113C

Stud

50326C with 51570C

Bushing

(small)(3)

131814

Block

with

51570C

Link

Cap Screw

Crank

with

Crank

14

No.

131815

131816

147518

140645F

131817

131818

131819

50505C

131820

131028

131821 168048

1057AL

50370AL

53225

168101 140180J

7071

168051

50150AL 168052 168053

168102

168103 168104

140407C

51323J

17022

168105 140180J

7071

168106 140180J

7071

168061

190J

7071

168130

223J

168045

131496

997J

742F

462AL

190J

176J

25556

25552

25556

25556 25556

25563

25564

25564 25553 25553

25564 25564

25564

25564 25564

25564

25564 25564

25564

25564 25564 25564

25563

25563 25556

25556

25563

25565

PARTS

FOR

MACHINE

Plate

Thread Carrying Finger Oscillating Arm(forked)

Presser BarBushing(lower)

Thread Carrying Finger Oscillating ArmSlide Block Thread Carrying Finger Oscillating ArmSlide

131816

ThreadCarryingFingerOscillating

Thread CarryingFinger OscillatingArmSlide Thread Carrying FingerOscillating ArmSlide Thread Carrying FingerOscillating ArmSlide Thread Carrying FingerOscillating ArmSlide

Thread CarryingFinger OscillatingArmSlide Thread CarryingFinger OscillatingArmSlide Thread Carrying FingerOscillating ArmSlide Thread LayingFinger

Thread LayingFinger Holder with

Thread

Thread Thread (under)Eyelet(back) Thread(under) Eyelet(back)Screw

Thread(under) Thread(under) Thread(under) Thread(under)Take-upwiththree Thread(under)Take-upSetScrew(3)

Thread

Thread Thread Thread

Thread Thread

Thread

Washer

Thread

Washer

Thread

Throat Throat

with

Screw

with 462AL

Driving Stud

DrivingStud Bushing

Driving Stud Bushing Set Screw

Set

Screw

Shaft

Shaft Oil Screw Plug

50370AL

Laying

Finger

Laying

FingerSet Screw(2)

Eyelet Eyelet

(under)

Take-up

(under)

Take-up

(under)

Take-up

(under)

Take-up

(under)

Take-up

(under)

51323J,

(under) (under)

(under) (under) (under)

(under)

(upper)

plate

(Spe

Plate

(See

Take-up

Take-up Take-up

Take-up Take-up Take-up

Take-up

Take-op

Take-up

Eyelet

Take-up

17022,

168105,168106 and three each 176J,7071 and

140180J

No.

247-4

Name

131817

and

140645F

Arm

Slide

1057AL

and two

Holder

Clamping

Eyelet

(front) (front)

Screw

(front)

ScrewWasher

Stripper Stripper

Stripper

Stripper Plate

Stripper

168052,168053, 168101,168102,

Stripper Stripper

Stripper Stripper Stripper

Stripper

Screw

Washer

with

223J

Clamping

(auxiliary)

Fittings

Page Page

Nos.23and Nos.

Fittings

50150AL

Bracket

Plate Plate

Screw Screw Thread

Thread

Screw

Clomp

23and

Screw

Bracket Bracket

Bracket

Screw

Washer

Guide

Separator

Screw.

24)

and

Block

Block Block Block Block

Block Block Block

(2)

168103

Screw

Screw...

Screw

Cap

Holder

Holder Holder

Holder Holder Holder Holder

with

LIST

OF

PARTS

FOR

15

COMPLETE

No.

*168066

68428 68429

1057AL

50608R

139017

68350

131864

131865

131866

131319

168111

1309C

131056

68433 68435

131095

68436

131072

50083AL

131456

42365 54969

1235F 168146 168147

131366

MACHINE

FOR

SEAMING

UPHOLSTERY

ILAR

WORK.

TRIMMER. CLEARANCE UNDER PRESSER

TWEEN

LEFT

STEPS OF NEEDLES

AND

CUSHIONS,

THREE NEEDLES,

DROP

FEED. NEEDLE BAR STROKE

AND CENTER

1/16"

AND BETWEEN CENTER AND RIGHT

1/8"TO1/4"

No.

WELTING AUTO SEAT COVERS,

TROUSERS,

NEEDLES

IN STEPS OF

DISTANCE BETWEEN OUTSIDE NEEDLES

2800,

446AL

423AL

453AL

ATION

DEPENDING

PERFORMED.

Plate

25551 25551

25551

25551 25552 25554 25554

25554

25552 25552

25552 25552 25552 25552 25552 25552 25552 25552

25554

25552 25552 25552 25552 25552

25554

ON

MATERIAL USED

Arm,

upper and lower

131022

Arm

Bottom

Arm Bottom Arm Bottom

ArmHole PlugScrew, for access to Crank Connecting Rod

Arm Hole PlugScrew

ArmOil Cup, for oiling Arm RockShaft Front Bearing ArmOil Cup, for 131866

ArmOil Cup Oil Gauge

ArmOil Cup with Oil

ArmOil Cup Oil Pad for68350

Arm

50505Cand 131819 ..1

ArmRockShaft AdjustingScrew

Arm

Arm RockShaft Bushing(back)

Arm Arm

ArmRockShaft Bushing(back) Set Screw ArmRockShaft Bushing(intermediate)

Arm RockShaft Bushing (intermediate) Set Screw

Arm

5C083AL

ArmRockShaft Crank (back) Set Screw (2)

ArmRockShaft Flanged Bushing(front) ArmRockShaft Flanged Bushing(front)Set Screw ArmRockShaft Oil Pod for oiling BockBearing

Arm

Arm Rock

ArmRotary Shaftwith 168215 ArmRotary Shaft 168146 with 131930

Arm Rotory

Cover

Cover Cover

(upper bearing)

reservoir,

Nos.

Rock

Shaftand

Rock

Shaft AdjustingScrewWasher

Rock

Shaft

Rock

Bushing

Shaft

Bushing

Shaft Crank, back (ball bearing, solid)with two

ShaftOil PadforoilingIntermediate

Shaft

Oil Plug Screw

Shaft

247-5

COATS

AND

TWO

LOOPERS.

FOOT

7/32".

1/16"

1/16".

Name

(solid)

Gasket

(cork)

Screw (4)

Washer

Gauge

131864

and

Front

Crank

(bock)Cop (back)Cap Washer (fiber)

Ball Bearing (back) (2)

VERTICAL

GAUGES

TO

MAXIMUM

3/8".

AND

with948J, 68483and four

complete, for filling oil

131865

with

1-3/8".

1/4",

SPEED

OPER

853AL,

and

SIM

BE

IN

1235F^-

Bearing

168010

16

No.

131478 131479

131526

131369

131370

131480 131366

131481

1304C

131482

131959

68497

68483

131028

131457

42367

54218

168215

131276 131909 131280

1289X

131910

131911

68448

1057AL 168067 168068

6465

168300

1011F

168071

38419

168072

168301

lOllF

131926

205C

429C

457AL

948J

761E

144D

74C

671W

164E

665J

742F

Plate

25554

25554 25554 25554 25554 25554 25554 25554

25554

25554 25554

25554

25554 25554

25554

25554 25554

25551 25551

25551

25551 25551

25551

25555 25555

25555

25555 25555 25555

25555

25555 25555

25555

25554

NOTE:

PARTS

FOR

MACHINE

Arm

Rotary

Arm

ArmRotaryShaft BallBeoring(back) Case Cap

Arm

ArmRotaryShaft Ball Bearing(back) Case SetScrew

ArmRotaryShaft BallBearing(back)Spacing Collar

ArmRotaryShaft Ball Bearing(intermediate) ArmRotaryShaft BallBearing(intermediate) Case ArmRotaryShaft BallBearing (intermediate)Case Set

ArmRotary Shaft BallBearing (intermediate) Collar with

Arm RotaryShaft BallBearing (intermediate) Collar Set Arm RotaryShaft Bushing(front)

ArmRotaryShaft

Arm Rotary Shaft Bushing(front) Bracket with761E Arm RotaryShaft Bushing(front) Bracket Screw Arm RotaryShaft Bushing(front) Oil Plug Arm RotaryShaft Bushing(front) Position Screw

Arm Rotary Shaft Bushing(intermediate)

Shaft

Rotary

Shaft

131369

and

Rotary

Shaft Ball

Bearings

complete,Nos.131479,131480 and two

131366

RotaryShaft BallBearing(back) CaseCap Screw(3)...

Rotary

Shaft Ball

Screw

two

457AL

Screw

(2)

three

Bushing

No.

247-5

Name

Ball

Bearing

(back)Case

(back)Cose

Ball

205C

Bearing

(front)Bearing OilPod

(back)

Case

(back)Case

131478

with

Position

Ball

(wick)

Arm RotaryShaft Bushing(intermediate) PositionScrew

Arm Rotary

ArmRotaryShaft

Arm Rotary

Arm Rotary Arm

ArmSide Cover Cap ArmSide Cover Cap PositionPin ArmSide CoverCap Screw

ArmSide CoverCap Spring ArmSide Cover(oilvent) complete,Nos. 1289X,131276,

Arm

Arm Side Cover Screw (4)

Chip Chute

Chip Chute Arm

Chip Chute Arm HingeScrew

Chip Chute ArmHinge Screw FrictionWasher Chip Chute ArmLockThumbScrew Chip Chute Screw (2)

Cloth Plate (sectional) with two 101IF

Cloth Plate Connecting

Cloth Plate Slide

Cloth PlateSlide Spring

ClothPlateSlideSpring Screw(2)

Cloth

ClothPlate(sectional) complete, Nos.168072and 168300.

Cloth Plate Screw (left) (2)

CfothPlate Screw(right)

Crank

When

Arm

Rock

AllAgency orders for the part muststate the Machine No.

for

which

Stroke.

Shaft

Bushing (intermediate) Oil Pad (lower)....

Bushing

Shaft

Side

Cover (oil vent)

131280,

131909

Side

Cover

Gasket

PlateSlidecomplete,Nos.38419,

(intermediate) Oil Pad (upper)....

Oil Wick

Screw

and

131910

Block

Screw (2)

168071

665J

Connecting

131927

No.

131926isrequired

Shaft Crank (back) fitted together will be furnished.

itis

and

131928

required;

Rod

with

inorderto

twoeach

for

repairs.

obtain

1057AL,

Connecting

correct

51715AL,

Needle

and two

Rod

with

Stud(3)

and

Bar

No.

131930 131927

51715AL

131928

1057AL 131760 131761

330J

131762

29234

1053E

50190W 168148 131730

190J

22436

168149

131197

59343

735AL 168076 131500

168010

896AL

1057AL

68497

134260

140275J

460AL

51061AL

7071

217J

138306

168011

168151

624AL

1103C

131240

168152

57234

57235

453AL

168080

1000C

168081

42038 42039

621E 336F

42041 168082 168187

168083 168084

172E

Plate

25554 25554 25554

25554 25557 25557

25557

25557 25557

25557 25557 25559 25559 25559 25559

25559 25559

25559

25554

25554 25554 25554

25554

25568

25559

25554 25554

25554

25559

25560

25560 25560 25560 25560

25560 25560 25560

PARTS

FOR

MACHINE

Crank

Connecting Rod

Crank Connecting Rod

Crank ConnectingRodCap (lower)ScrewStud Nut (2)

Crank ConnectingRodCap (lower)ScrewStud Nut

Washer

Crank Connecting RodCop (upper) Screw (2)

Face

Face Plate (lower half)

Face

Face Plate (upper half)

Face Plate (upper half) Position Plate

Face Plate (upper half) Position Plate Screw

Face Plate (upper half) Thumb Screw

Feed

Feed Bar Feed DogSeat (adjustable) with460AL

Feed Bar Feed Dog Feed Bar Feed Dog

Feed Bar

Feed Feed Feed

Feed BarSlide Block(two pieces)

Feed Connecting Rod with 1057AL, 68497,

Feed

Feed Connecting RodCop Screw (2)

Feed Connecting RodClamping Screw

Feed Connecting RodOil Pod (wick) Feed Connecting RodOil

Feed Dog, (See Fittings Feed Dog Screw, for use with Movable Needle

(2)

Plate

(lower half)

Plate

(lower half) Screw (2)

Bar

with

and

190J,

22436,131730

Bar hlinge Pin (eccentric) Bar Hinge Pin Bar Hinge Pin

two

896AL

Connecting Rod

No.

247-5

Name

131926

with 131072

Cap

(lower) ScrewStud (2)

Gasket

(cork)

620AL

Seat

Screw

Seat

Feed Dog LevelingDevicecomplete. Nos.

Screw Washer

and

Collar

with 735AL

Collar

Set

168148

Screw

134260

131500

with 168011

Pad

Retainer

Page

Nos. 24 ond 25)

Guard

Feed Dog Stop Screw

Feed EccentricBody SetScrew (3)

Feed EccentricClamping Washer (2) Feed EccentricClamping Washer Screw (2)

Feed EccentricLubricating Pad (wood)

Feed Eccentric(adjustable) complete, Nos. 1103C, 138306,

two

each

217J,

7071

and

three

Feed Lifting Eccentric with Feed Lifting Eccentric Set Screw (3) Feed Regulating Screw

Feed

Rocking

Frame

Feed Rocking Frame 131240 with 59343, 131197, 132583

and

168149

Feed RockingFrame Hinge Pin

Feed RockingFrame Hinge Pin Bushing(2) Feed RockingFrame Hinge Pin

Feed RockingFrame Hinge Pin Set Screw (2)

Knife

(movable)

Knife

(movable)Clamping Screw

Knife (movable) Holder with

Knife

(movable)

Knife (movable) Holder

Knife(movable) Holder Guide Plate Screw (2)

Knife (movable) Holder

Knife

(movable) Holder Spring

Knife

(movable)

Knife (movable) Lever 168082with 1722J, 14017, 132583

and

168086

Knife(movable) Lever Bearing Arm Knife(movable) Lever Bearing ArmBracket Knife(movable) LeverBearing Arm BracketScrew (2)

with two 453AL

Holder

Guide

Lever with

three

1178C

624AL

Bushing

1000C

with 336F

Plate

Screw

51061AL

Set Screw(2)

and

20437

17

Lock

and

PARTS

FOR

18

MACHINE

No.

247-5

No. 54369

465AL

1178C

20437 168085 132583

132584

620AL

168086

1722J

14017

168087

1756J 168088 168089 168090

448AL

1253AL

168195

168196

208AL

168197

168016

168208

168238

168017

168018

1057AL

68497

1231E

1497C 168151 168019

132583

132584

223C

168020 168021

168022

448AL

168023

624AL 168024 168025

168205

175C

140159AL 168026

Plate

25560 25560 25560 25560 25560 25560

25560

25560 25560 25560

25560 25560 25560 25560 25560 25560

25561

25561 25561

25561

25561 25561 25554 25561

25561

25554 25561 25561

25561

25554 25561 25561

25561

Knife (movable) Lever Bearing Arm Collar with two 465AL..

Knife(movable) Lever Bearing Arm Collar Set Screw (2)

Knife(movable)LeverClampingScrew

Knife(movable) LeverClamping Screw Washer

Knife (movable) LeverConnecting Link

Knife(movable) LeverConnecting

132584(2)

Knife(movable) LeverConnecting

(wick) (2)

Knife(movable) LeverConnecting

(2)

(movable)

Knife

Knife (movable) Lever Connection Nut

Knife

(movable)

Knife(movable) Lever HingeScrew Stud

Knife(movable) LeverHinge ScrewStud Nut

Knife(stationary)

Knife

(stationary)ClampingPlate

Knife(stationary) Holder

Knife

(stationary)

Knife

(stationary^

Looper(back)

Looper(front)

Name

Lever

Holder

Set

Connection

Set

Screw

Link

Hinge Pinwith

Link

Hinge PinOil Pad

Link

Hinge PinSet Screw

with 620AL

Nut

Washer

Looper(front)Screw (2)

Loopers

complete,Nos. 168195,168196 and two

LooperCarrier

Looper

Carrier168016

168021

Looper

LooperCarrierShaft Crankwithtwo

Looper

Looper Looper Looper

Looper

Looper Looper

Looper

and 168023

Carrier

CarrierShaftwith

Carrier

Carrier CarrierShaft CarrierShaftSet

(avoiding

with132584

(avoiding

Oil

Wick

(avoiding

SetScrew

(avoiding

Screw

Bushing

(avoiding

Screw

Bushing

(avoiding

Screw

Bushing

(avoiding

Thrust

Bearing

(avoiding

(driving)

and

140159AL

(driving)

168018,

168024

(driving) (driving)

(driving)

with

168208

with

1231E

Shaft

Crank

ShaftOilPad

Plug

Screw

motion)

Eccentric

motion)

Eccentric

motion)

Eccentric

motion)

Eccentric

motion)

Eccentric

motion)

Eccentric

motion)

Eccentric

motion)

Eccentric

Bearing

motion)

Eccentric

Set

Screw

motion)

Eccentric

motion)

Eccentric

with

Eccentric

Connection

Eccentric

Connection

and

168026

Eccentric

Connection

Eccentric

Connection

Eccentric

Connection

132583,168019,168020,

168017

Clamping

(wick)

(2)

three

and

1057AL

Screw

with

three

Connection

Set

Screw

1036AL

with

168025

Cap Cap

Position

168205

(2)

624AL

with

Hinge

Holder........

Holder

(3)

twoeach

with

(lower)

(upper)

Plate

208AL

223C...

175C

50138E,

Screw

"!!!

(2)

No.

50138E

1036AL

131504

51119J

1120AL

131914

51283AL

131497

168210

1133E

64320

1133E 168030 168031

68489

1520J

131270

861C

853AL

131492

1492E

68123

904AL 906AL

68492

68493

176E

68494

198E

68495

68496

1733

68497 168036 168037

131004 131798

1733

168038

168039

131003

198E

131004

1733

68497 168040

Plate

25561

25561 25554

25554 25557

25557 25557

25557 25557 25557

25557 25557 25557 25557

25552 25557 25557

25568

25557 25557

25562

25562 25562

25562

25562 25562 25562 25562 25562

25562

25562 25562 25562 25562

25562

25562 25562 25562 25562

PARTS

FOR

MACHINE

Looper(driving) EccentricConnection PositionPlate Screw..

Looper (driving)EccentricSet Screw (3)

LooperHolder with

Looper Holder Screw

Looper Set Screw

Machine

Driving

belt groove 2.9 in.)with two 51283AL,for

belt

Machine DrivingPulleySet Screw (2)

Needle

Bar (hollow)

Needle Bar complete,(See FittingsPage Nos. 24and 25)...

Needle BarBushing (lower)

Needle

Bar Bushing (lower) Set Screw

Needle Bar

Needle Bar Connecting Link

Needle Bar Connecting Link168030 with 68489

Needle BarConnecting Needle BarConnecting

Needle BarConnecting

Needle Bar Connecting Stud with 1492E

Needle BarConnectingStud ClampingScrew

Needle Clamp (See

NeedleGuard

Needle Guard (movable)Clamp

Needle Set Screw (back) (2) Needle Set Screw (front)

OilPipe(backof arm)with68497,foroilingFeed

Oil Pipe (backof arm)Clamp

OilPipe(backof arm)ClampScrew

Oil Pipe (back of arm)Connection with68495 and two

OilPipe(backof arm)

OilPipe (backof arm)ConnectionOil Pad Oil Pipe (backof arm)Coupling Oil Pipe(back ofarm) CouplingNut (brass)

Oil Pipe(back of arm) Oil Pad (wick) Oil Pipe (front of arm, long) withtwo 1733

Oil Pipe(frontof arm, long)complete,Nos.168036, Oil Pipe (frontof arm, long)Coupling(left)

Oil Pipe(frontof arm, long)Coupling(right) OilPipe (frontof arm, long)CouplingNut (brass)(2)

Oil Pipe (front of arm, long) Oil Lead with 1733, and

Oil Pipe (frontof arm, long) Oil Lead with68497 Oil Pipe (front of arm, long) Oil Lead Connection withtwo Oil Pipe (front of arm, long) Oil Connection withtwo 198E,

Oil

OilPipe(frontof arm,long)Oil Lead

Oil Pipe(front of arm, long) Oil LeadCoupling Nut (brass).

Oil Pipe (front of arm, long) Oil Lead Oil Pad (wick)

Oil Pipe (front of arm, short) with 131089 and two 1733

Bushing Bushing

131492

25)

Frame Hinge Pin Front Bearing

198E,

foroilingFeed

Bearing

168038

and

131003,for oiling

131003,for oiling Feed ConnectingRod

198E, for 168038

for

168038

Pipe

(front

Screw

(4)

No.

247-5

Name

1120AL

Pulley,"V" belt groove(outside diam.of

(upper) (upper) Set Screw

3/8

in. "V"

and

Link

HingeStud (hollow)

Link

Hinge Stud Nut

Link

Fittings

(movable)

HingeStud OilPad

Link

HingeStud OilPlug Screw.

Link

Hinge StudSet Screw

Page Nos.24 and 25)

(See

Fittings

Page Nos.24 and

Rocking

FrameHingePin

Connection

Cap Screw(2)

(wick)

Back

(wick)

168039

Arm

Rotary

ofarm,

and

long)

ShaftFront

168039 (2)

Oil

Lead

Bearing

Connection

and

Cap

Coupling

Rocking

19

20

No.

131004

1733

131089 168097

330J

168042

54038

190J

217J

131912

38456

1133E

131799

11173

453AL

453AL 131402 168043

161J

802X 131749 131750

38468

168044

176J

269W

1637J 131752 168046

208AL

2102

51570C

32572

54988

50326C

59539

131740

59537

59538

54279

168047

335J

2102

51570C

140113C 131809

131740

59537

59538

131696

54245

376J

2102

51570C

32572

54988

54246

54047

54048

Plate

25562 25562

25555 25555 25555 25555 25555

25555

25557

25557 25557 25557 25563 25563 25563 25563 25551 25551 25551 25551

25565

25551 25551

25551 25557 25557 25563

25563

25563 25563

25563

25563 25563 25563

25557

25563

25563 25563

25563

25563 25563

25563

25563 25563 25563

25563

25563 25563 25563

PARTS FOR

OilPipe(frontof arm,short)

Oil Pipe(front ofarm, short)Coupling Nut(brass) (2) Oil Pipe(frontof arm, short)Oil Pad

Oil Splash Guard

Oil Splash Guard Screw (2)

Oil Splash Guard (side ofarm)

Oil Splash Guard (side of arm) Holder Oil Splash Guard (side of arm) Holder Screw Oil Splash Guard (side of arm) Screw

Presser

Presser Bar Bushing (upper)

Presser Bar Bushing (upper)Set Screw

Presser Bar Lifting Bracket with 453AL

Presser Bar Lifting Bracket Presser Bar LiftingBracket

Presser Bar Lifting Bracket

Presser Bar Lifting Lever Presser Bar Lifting Lever Extension

Presser Bar Lifting Lever Extension Screw (2)

Presser Bar Lifting Lever Hinge Screw

Presser BarSpring

Presser BarSpring (auxiliary)

Presser BarSpring Stud

Presser BarSpring complete, Nos. 269W, 1637J, 131749,

Presser

131750

and

MACHINE

Bar (hollow)

and

131752

Foot

(hinged)

25)

No.

247-5

Name

Coupling

Guide Guide

Set

Screw

complete(See

Set

(2)

(wick)

Screw

Fittings

Page Nos.24

Presser Foot Screw Pressure Regulating Thumb Screw Pressure Regulating Thumb Screw LockNut

Pressure Regulating Thumb Screw

Tension

(thread

Tension

Tension(thread covering) Screw Stud

Tension

Tension(thread covering) Thread Guide

Tension

Tension(under thread) Disc(4)

Tension

Tension(under thread) ScrewStud (2)

Tension

(2)

Tension

Tension Tension Tension

Tension Tension

Tension

Tension Tension

Tension

covering)

(thread

covering)

(thread

covering)

(thread covering)Regulating

(thread

covering)

(thread covering)ReleasingPin

(thread covering)ScrewStud 50326Cwith51570C.

(thread

covering)

(thread

covering)

(threadcovering) Spring

(thread

covering)

(thread covering)ThreadGuide Screw

(under

thread)

Regulating

(under

thread)

Screw

(underthread)Spring(2)

(under

thread) thread) thread)

Spring Spring

Thread

Disc

Regulating

Releasing

(under (under

(upper thread) Bracket (upper thread) BracketScrew

(upperthread)

(upper thread) ReleasingShaft (upper thread) ReleasingShaft Crank with

(upper thread)

Washer

Controller

Disc

Releasing

Spring

ThreadGuide

(2)

Bushing

Eyelet

Thumb

Disc

Thumb

Stud

140113C

Bushing Bushing

Guide

(6)

Thumb

Disc

Pin(3)

Shaft Crank

Screw

Nut

(large)

(small)

(double)

Nut

with

(large)(2)

(small)

(double)

Nut(3)

(3)

(2)

Link

51576c

624AL...

PARTS

FOR

MACHINE

No.

247-5

21

No.

624AL

68261

316C

1547J

50326C

59539

131741

59537 59538

54279

168144 168209

50624E 131811 131812 131868

1057AL

212J

131813

226C

131814

171AL

131815

131816

147518

140645F

131817

131818

131819

50505C

462AL

131820

131028

131821

168048

1057AL 50370AL 53225

190J

168101

140180J

7071

168051

50150AL

168052

168053

176J

168102

Plate

25563

25563 25563 25563 25563

25563

25557 25557 25557 25557

25557

25552

25557

25557 25557

25557 25557 25563 25563

25564

25564 25564 25554 25554 25564 25564 25564 25564

Tension

(upper thread) ReleasingShaft Crank SetScrew

Tension(upper thread) Releasing Shaft Spring

Tension(upper thread) Releasing Shaft Stop Screw

Tension(upper thread) Releasing Shaft Stop ScrewNut Tension(upper thread) ScrewStud (3)

Tension

(upper thread) ScrewStud 50326C with 51570C(3)

Tension

(upper thread) Spring (3)

Tension

(upper thread) Spring

Tension

(upper thread) Spring

Tension

(upper thread) Thread Guide (double) (3)

Tension(upper thread) Thread Separator

Thread Carrying Finger

Thread Carrying Finger Clamping Screw Thread Carrying Finger Holder (segment) with 50624E

Thread Carrying FingerHolder Bracket Thread Carrying FingerHolder Bracket131812 with 212J,

226C,

131811,

Thread Carrying Finger Holder Bracket Screw (2) Thread Carrying Finger Holder Cop Screw Thread Carrying Finger Holder Slide Block Thread Carrying Finger Holder Slide BlockCop Screw Thread Carrying Finger Holder Slide BlockCrank with

171AL

Thread Carrying Finger Holder SlideBlockCrank

Clamping Screw

Thread Carrying FingerOscillating

Presser Bar Bushing (lower)

Thread Carrying FingerOscillatingArmSlide Thread CarryingFinger Oscillating ArmSlide

131816

Thread Carrying Finger Oscillating Arm Slide BlockCap

Screw

Thread Carrying Finger OscillatingArmSlide

with 462AL ,

Thread Carrying FingerOscillating ArmSlide BlockHolder

DrivingStud

Thread Carrying Finger Oscillating ArmSlide BlockHolder

DrivingStud Bushing

Thread Carrying Finger Oscillating ArmSlide BlockHolder

DrivingStud BushingSet Screw

Thread Carrying Finger Oscillating ArmSlide BlockHolder

Set

Screw

Thread

Carrying

Shaft

Thread

Carrying

Shaft Oil Screw Plug Thread LayingFinger Thread LayingFinger Holder with 1057ALand two

50370AL

Thread Laying Finger Holder Clamping Screw

Thread Laying Finger Set Screw (2)

Thread (under) Eyelet (back) Thread (under) Eyelet (back) Screw Thread (under) Eyelet (front)

Thread (under) Eyelet (front)Screw Thread (under) Eyelet(front) ScrewWasher Thread (under) Take-up withthree 50150AL Thread (under) Take-up Set Screw(3)

Thread (under)Take-upStripper

Thread (under) Take-up Stripper Bracket

Thread (under)Take-upStripper BracketScrew(2)

Thread(under) Take-upStripper Plate

Name

Bushing

(large) (3)

Bushing

(small)(3)

131813

and

131814

Arm

(forked)and

with

131817

and

140645F

Finger OscillatingArm Slide BlockHolder

Finger Oscillating Arm Slide Block Holder

Block Block

Block

Holder