Singer 247-2, 247-3 User Manual

Form

(153)

Printed

20632

in U. S. A,

DEPARTJAENT

LIST

OF

PARTS

52

SINGER"

A^ACHINES

Nos.

THE

**A

Trade Mark Of

247-2

SINGER

THE

SINGER

and

MANUFACTURING

247-3

COMPANY

52

INSTRUCTIONS

FOR

OILING

To ensure easy

the parts

oiling

which

and

when in continuous use,

running

are

and prevent unnecessary wear of

in movable contact, the machine requires

"TYPE

B" or

"TYPE

D" OIL,

sold by Singer Sewing Machine Company, should be

applied

"OIL,"asinstructed in Form

which will produce a minimum of stain on fabrics, after

at

least twice each

"TYPE

D"

OIL

a long period of

should

SPECIAL

20456.

be

used

storage.

day

to all oil holes marked

when

on

oilisdesired

NOTICE

even

The letter "o," marked on oil pipe couplings must always

be on the top.

This

is to insure that the oil spoon, attached

to the inner end of each coupling, is open side up.

Copyrleht, U.S.A., 1938, 1952 and 1953 by

The

Singer

Ati Rights Reserved for Ali Countries

Manufacturing

Company

INDEX

Page

Accessories

Belt

Guard

CordorLoce

Edge

Guide

Holder

(Solid Tube Borders) 26

Edge Guide (Split Tube Borders) 26

Edge

Guides

Fittings Fittings

Foot

Lifter

Knee

Lifter

Machine

Machine Machine

Machine Material

Numerical

Strip

Gauge

Tape

Disc

Tape

Holder 29

(247-3

for

247-2

for

247-3

Parts

247-2

247-3 Base

Base

Oil

Guard

ListofPorts

Guide

Machine)

Machine Machine

Drain

^ 7

Jar

Thread Unwinder 247-2 Machine 29

Thread

Transverse

Tube

Unwinder

BinderonShank

Guide

247-3

Machine

30

29

28

26

24

22 23

27

15

27

28 28

31

28 29

INSTRUCTIONS FOR ORDERING

In ordering from this

the

FIRST

column.

list,

use

ONLY

the port

NUMBER

The number stamped on a Sewing Machine Part is in

every case the

Every

number

combination

of the

single

port

of portssentoutas

only.

such

has its

specific

number, which, although not stamped on the ports, must be

used when ordering the combination.

Each number always indicates the

ever list it

appears,

or for whatever machine.

SAME

PART

in what

The letters after some of the numbers indicate the style

of finish only, as follows:

A—Hardened,

A.A—Buffed

A.B—Hardened, Polished, Buffed

A.C—Brown

A.D—Gray Baking Enamel

A.E—Hardened, Bright Rumbled

Polished, Nickel

and

Chromium

Plated

Baking Enamel Finish

Finish

Plated

and

Chromium

and

Nickel Plated

and

Buffed

Plated

A.F—Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled

and

A.G—Alumilite,

A.H—Alumilite,

A.J—Polished, Nickel

A.K—Hardened, Polished, Nickel

Chromium

Plain

Dyed

Plated

and

Chromium

Plated

and

Plated

Chromium

Plated

A.L—Heat Treatedfor Toughness

B—Polished, Nickel

Plated

and

Buffed

C—Hardened Only

C.R—Hardened

D—Polished

E—Soft,Not Polished

F—Hardened

FJ—Hardened,

G—Bright Rumbled

H—Blued

J—Nickel

K—Hardened

L—Brass

M—Oxidized

and

Only

and

Polished

Plated Only

and

Plated

Merlized

Polished

and

Nickel Plated

Nickel

Plated

N—Japanned, Dull P—Japanned, Bright

P.P—Wrinkle

R—Merlized

S—Cadmium

T—Copper

T.A—Hardened,Polished,Copper

T.B—Copper

T.J—Copper

T.K—Hardened, T.L—Copper

T.M—Copper

Finish

Plated

and

Nickel

Platedand

and

Nickel

Copper and

and

Plated Only

Nickel

BrassPlated

Platedand Oxidized

and

Nickel Plated

Polished

Plated

and

Buffed

in

INSTRUCTIONS

FOR

ORDERING-Continued

U—Zinc V—Silver

W—Polished

X—Black

X.C—Hardened

Y—Black

Z—Chromium

Z.A—Hardened, Polished, Nickel

Z.B—Polished, Nickel

Z.C—Hardened

Z.D—Polished

Plated

and

Nickel

Oxide,

for Iron

and

Black

Nickel Plated Only

Plated

Plated,

and

Chromium

and

Chromium

Plated

and

Oxide,

Buffed

Plated

Steel

for IronorSteel

Plated,

Plated

and

Buffed

Chromium

and

Plated

Chromium

Z.G—Bright Rumbled, Nickel Plated, Bright Rumbled

Chromium

ZJ—Nickel

Z.T—Copper

These letters

list;

and

AFTER

In

this

1 to

Screw

1501to1800

1801to2000

2001

and

series:

1500,

Numbers

to

Plated

Chromium

Chromium Plated

MUSTBEUSED

the

numberasm

50001to51500

and

51501to51800

and

51801to52000

50000

and

Plated

52001

when they

the

list.

and

140001to142000

are

to

140000

Nut

Roller

end

appear

Numbers

142001

190000 are Sewing Machine Parts, 190001 and upward

are

numbers

of

Electrical

Ports.

The figures in the second column refer only to the plates,

illustrating the parts, and are NOT TO

BE

USED

in ordering.

Parts marked with an asterisk (*) are furnished only when

repairs

distance

must be given on

are

madeatfactory.

When ordering parts which differ as to

between

seams), the

order.

Gauge,

as well as the Number,

Gauge

and

in the

are

to

(the

SINGER

These

Needles

in SINGER

Needles

are

marked

and

Company's Trade Mark

should

Machines

their

with

be

used

Containers

the

"S(MANCO**

NeedlesinContainers

"FOR

SINSER

are

NOT

SINGER

marked

MACHINES"

made needles. 2

LIST

OF

PARTS

FOR

51

COMPLETE

No.

*168001

68428 68429

1057AL

50608R

139017

68350 131864 131865 131866

131319 131937

1309C

131056

68433

68435

131095

68436

131072

50083AL

131456

42365

54969

1235F

MACHINE

FOR

ATTACHING

AND

ARM

FOR

ATTACHING

NEEDLES,

COVERING THREAD. GAUGES FROM

OF

1/32".

5/32".

NEEDLE

ING

ON

Plate

25551 25551 25551 25551

25551 25612 25613

25613 25613

25612

25612 25612 25612 25612

446AL

423AL

453AL

25612

25612 25612 25612 25613

25613

25612

SPLIT TUBE

HOLESOFUNDERWEAR.

LACE

ONE

LOOPER

MAXIMUM CLEARANCE UNDER PRESSER FOOT

BAR

STROKE

MATERIAL USED

Arm,upper and lower(solid)with51422J, 68483 and four

131022

Arm

Bottom

Arm Bottom Cover Arm Bottom CoverScrew (4)

Arm Hole Plug Screw, for access to Crank Connecting Rod

(upper bearing)

Arm Hole Plug Screw

ArmOil Cup, for oiling Arm RockShaft Front Bearing ArmOil Cup, for 131866

ArmOil Cup OilGauge

ArmOil Cup withOilGauge complete, Nos. 131864 and

131865, for fillingoil reservoir

ArmOil Cup Oil Pad (braided cotton) for 68350

Arm Rock

50505Cand

Arm RockShaft AdjustingScrew

ArmRockShaft AdjustingScrew Washer

Arm RockShaft Bushing(back)

Arm

Rock Rock

Arm

Arm RockShaft Bushing(back) Set Screw Arm ReckShaft Bushing(intermediate) Arm RockShaft Bushing(intermediate) Set Screw

ArmRockShaft Crank, back (ball bearing, solid) withtwo

50083AL

Arm RockShaft Crank (back) Set Screw(2) Arm ReckShaft Flanged Bushing (front) Arm RockShaft Flanged Bushing(front) Set Screw

Arm

Rock

Bearing

Arm

Rock

Intermediate Bearing

ArmReckShaft Oil PlugScrew

No.

247-2

AND

TUBE

BORDERSTONECKS

CAN

ALSO

BE FITTED

TO

KNIT

AND

Cover

MECHANISM

1/8"TO1/4"

1-7/32".

SPEED

OPERATIONS

Name

Gasket

(cork)

UNDERWEAR.

FOR

2800,

TWO

LAYING

TOP

IN STEPS

DEPEND-

PERFORMED.

Washer

Shaft

and

Front

Crank

with 853AL, 1235F,

(back) Cap (back) Cap Washer (fiber)

Shaft Shaft

131819

Bushing

Shaft Oil Pad (braided cotton) for oiling Back

Shaft Oil Pad (braided cotton)for oiling

8

PARTS

FOR

MACHINE

NO.

247-2

No.

168002 25613 ArmRotaryShaft with 168215 168003 ArmRotaryShaft 168002with 131930 and 168010

131366 25613 ArmRotaryShaft BailBearing(back) (2)

131478 25613 ArmRotaryShaft BoilBearing (bock)Cose 131479 ArmRotaryShaft BallBearing(back) Case 131478with

131526 ArmRotaryShaft BallBearing(back) Case withBall

131369

205C

131370

429C

131480

131366

131481

1304C

131482

457AL

131959

68497

*68483

51422J

131028

761E

131457

761E

42367

54218

168215

144D 131276 131909 131280

1289X 131910 131911

68448

1057AL

168255

68107

38419

665J

68108

168261

lOllF

50473F

*131926

131930

Plate

25613

25613 25613 25613 25613

25613 25613

25613

25613 25613

25613

25613 25613

25613

25613 25551 25551 25551

25551

25551 25551

25551 25551 25614

25614

25614 25614

25614

25613

NOTE:

Name

131369

and

three

205C

Bearingscomplete, Nos.131479,131480 and two

131366

ArmRotaryShaft Ball Bearing(back) Cose Cop

ArmRotaryShaft BallBearing(back)Case Cap Screw(3)...

Arm RotaryShaft Ball Bearing (back) Case PositionStud (3) Arm RotaryShaft Ball Bearing (back) Case Set Screw

ArmRotaryShaft BallBearing(back) Spacing Collar

Arm RotaryShaft Bali Bearing (intermediate)

Arm RotaryShaft Ball Bearing (intermediate) Case

Arm

Rotary

Shaft

Ball

Bearing

Screw

(intermediate)

Arm RotaryShaft Ball Bearing (intermediate) Collar with

two

457AL

Arm RotaryShaft BallBearing (intermediate) Collar Set

Screw

(2)

Arm Rotary ShaftBushing (front)

ArmRotaryShaft

ArmRotary Shaft Bushing(front) Bracketwith761E

Arm RotaryShaft Bushing(front) BracketScrew

ArmRotaryShaft

Arm RotaryShaft Bushing (front) PositionScrew

ArmRotaryShaft

Arm RotaryShaft Bushing(intermediate) PositionScrew

ArmRotaryShaft

(braided cotton)

Arm

Rotary

(braided

ArmRotaryShaft Oil Wick

Arm RotaryShaft Screw

Arm

Side

ArmSide Cover Cap

ArmSide CoverCap

ArmSide CoverCap Screw

ArmSide Cover Cap Spring

ArmSide Cover(oilvent) complete,Nos.

131280,131909

Arm Side Cover

ArmSide Cover Screw (4)

Cloth

Plate

Cloth Plate Slide

ClothPlateSlideSpring

ClothPlate SlideSpringScrew(2)

CiothPlate Slide complete, Nos.38419, 68107 and two

665J

ClothPlatecomplete,Nos.68108,121678,140594C,

168255

Cloth Plate Screw (left) (2)

ClothPlate Screw (right) Crank ConnectingRodwithtwo each

131927

When

No.

Rod

and

be

machine

correct

Arm

furnished.

number

Needle

Crank

Connecting

Bushing

Bushing Bushing Bushing

Shaft

Bushing

cotton)

Cover (oil vent)

Position

and

131910

Gasket

and

168265

and

131928

131926isrequired

Rock

Shaft

Agency

which

Stroke.

Rod

Cronk

orders

ft is required, in order to obtain

131926

All

Bar

for

(front)Bearing OilPad

(front)Oil Plug (intermediate)

(intermediate) OilPad, lower

(intermediate) Oil Pad, upper

for

repairs,

(back)

for

this

with

131072

1289X,

1057AL,

the

fitted

part

CaseSet

5171

together,

must

131276,

Connecting

state the

(wick)

SAL,

will

PARTS

FOR

MACHINE

NO.

247-2

No.

131927

51715AL

131928

1057AL

131760

131761

330J

131762

29234

1053E

50190W

168006

168007

131766

889AL

68467

207E

157J

50429AL 147568 147569

51408AL 147570

147571 131769

704E

131770

1147AL

190J

168009

131500

168010

896AL

1057AL

131772

59343

735AL

68497

134260

51061AL

7071

217J 138306 168011

168012

624AL

1103C 131773 168303

131775

57235

1036AL 131776

453AL

Plate

25613

25613 25613

25613

25616

25616 25616 25616 25616

25618

25623 25618

25618

25618 25618 25618 25618

25623

25618

25613

25613 25618 25618 25618 25613 25613

25613

25618

25618 25618 25618

25618

Crank

Connecting

CronkConnecting RodCap (lower)Screw Stud Nut (2)

CrankConnecting

Washer

Name

Rod

Cap

(lower)

ScrewStud(2)

Rod

Cop

(lower)

(2)

ScrewStudNut

Lock

Crank Connecting RodCop (upper) Screw (2)

Face Plate (lower half)

Face

Plate

Face

Face Plate (upper halO Face Plate (upper half) PositionPlate

Face Plate (upper half) PositionPlate Screw Face Plate (upper half) ThumbScrew

Feed

Feed (bock) Bar complete, Nos.

Feed (back) Bar Hinge Pin

Feed (back) Bar Hinge Pin Set Screw

Feed (back) Bar Feed (back) Bar

Feed (back) Dog (See FittingsPage Nos. 22

Feed (back) Dog Screw

Feed (back) Stop Screw

Feed (front) Bar

Feed (front) Bar Feed Dog

Feed (front) Bar Feed Dog Feed (front) Barcomplete, Nos. 51408AL,147568 and

Feed Feed

Feed

Feed (front) Bar Slide Bar

Feed (front) Dog, (See Fittings

Feed

Feed Connecting Rod with 1057AL,

Feed

Feed Connecting Rod

Feed Connecting RodClamping Screw

Feed Connecting Rod Hinge Pin (eccentric)

Feed Connecting Rod Hinge Pine Collar with735AL

Feed Connecting Rod Hinge PinCollar Set Screw

Feed Feed

Feed Eccentric BodySet Screw (3) Feed Feed Eccentric Clamping Washer Screw(2)

Feed Eccentric Lubricating Pad (wood)

Feed Eccentric (adjustable) complete, Nos.1103C,

Feed LiftingEccentric with three 624AL

Feed Lifting Eccentric

Feed Regulating Screw

Feed

Feed Rocking Frame 131773 with 61C, 704E, 1655E,

Feed Rocking Frame Hinge Pin

Feed RockingFrame Hinge PinBushing(2) Feed RockingFrame Hinge PinBushingSet Screw (2)

Feed Rocking Frame Hinge PinSet Screw (2) Gathering Feed Actuating Lever

(lower half)

Plate (lower half) Screw (2)

(back) Bar

168006

and

147569

(front) Bar (front) Bar

(front) Bar

(front) Bar Slide Bar

(front) Dog Screw

Bar

Slide

896AL

Connecting Rod

Connecting Rod Oil Connecting Rod Oil

Eccentric

138306,

two

Rocking Frame with 889AL

51700C,

59343,131766,131772,131775,131779,

131780,131781,14031IC,

Gasket

(cork)

1147AL,

two

207E

Wearing

Plate

Wearing

Plate Screw (2)

Seat

(adjustable)

Seat

Screw

147570

with

Screw

Set

131500

Cap

Pad Pad

131769

Screw

Page

with 168011

Screw (2)

(wick) Retainer

Guide

Block

ClampingWasher (2)

each

217J,

7071

and

Set

Screw (3)

and

147571

50429AL,68467,

and

131770

Nos. 22

and

68497,134260

three

51061AL

two 1036AL

and

168007

23)

and

two

10

No.

131777

131867

172J

50183F

1520J

359C

1654C 1654C

9525

131778

1226C

910AL

1735C

175C

1735C

131779

1057AL 131780 140311C

51700C

131781

1655E

168014

168015 168016 168208

168238

168017

168018

1057AL

68497

1231E

1497C

168012

168019

132583

132584

223C

168020 168021

168022

448AL

168023

624AL

168024

168025

170C

61C

Plate

25618

25618 25618

25618 25618 25618

25618

25618 25618 25618 25618 25618 25618 25618 25618 25618 25618

25618

25602

25602 25602

25602 25602 25602

25613 25602 25602 25613

25602

25613

25602

PARTS

FOR

MACHINE

Gathering Feed ActuatingLeverBracketwith 175C,910AL

and

two

Gathering Feed ActuatingLeverBracket131777 with

Gathering Feed Actuating LeverBracket Screw (2)

Gathering Feed Actuating LeverHinge Screw Gathering Feed Actuating LeverHinge Screw Nut Gathering Feed Actuating LeverLockingScrew Gathering Feed Actuating LeverLockingScrew LockNut

Gathering Feed Actuating Lever LockingScrew Nut

Gathering

Gathering Feed Actuating LeverSpring

Gathering Feed Actuating LeverSpring ScrewStud (lower)

GatheringFeedActuating

Gathering FeedActuating LeverStop Screw(lower)

Gathering FeedActuating

GatheringFeedActuating GatheringFeedActuating

Gathering Feed Regulator with two 1057AL

Gathering Feed RegulatorClamping Screw(2)

Gathering Feed Regulator Connection:

Gathering Feed RegulatorConnectionHinge Screw(back).. Gathering Feed RegulatorConnectionHinge Screw(back)

Gathering Feed Regulator ConnectionHingeScrew (back)

Gathering Feed Regulator Connection Hinge Screw (front)

Gathering Feed RegulatorConnection HingeScrew (front)

Looper Looper 168014 with 229J

Looper Carrier.

Looper Carrier 168016 with 132583,168019,168020,

Looper Carrier 168208 with 168017

Looper

Looper Carrier ShaftCrank with two 1057AL

LooperCarrier Shaft CrankClamping Screw(2)

Looper Carrier ShaftOil Pad (wick) Looper Carrier ShaftPlug Screw Looper CarrierShaft Set Screw Looper (avoiding motion) Eccentricwiththree 624AL Looper (avoiding motion) EccentricConnection with 223C...

Looper

Looper (avoiding motion) Eccentric Connection Holder

Looper (avoiding motion) EccentricConnection Holder Looper (avoiding motion) EccentricConnection Holder Looper (avoiding motion) EccentricConnection Holder

Looper(avoiding

Looper(driving) Eccentricwith three 1036AL

Looper (driving) EccentricConnection withtwo each 175C

1735C

359C, 1226C, 1520J, 9525,50183F, 131776

1654C

Feed

Washer

Not

Nut

Washer

Nut.

168021

and

Carrier

(avoiding

with 132584

(avoiding

Oil Wick

(avoiding

Set

Screw

Screw Bushing

Screw BushingBearing

Screw BushingSet Screw (2)

ThrustBearing

and

140159AL

NO.

247-2

Name

Actuating Lever Locking Screw Nut

Lever

SpringScrewStud (upper)

Lever

Stop Screw(lower)Nut

Lever

StopScrew(upper)

Lever

StopScrew(upper) Nut

and

46104

168023

Shaft

motion)

with 1231E

Eccentric

and

168205

Connection

Set Screw(3)

and

HingePin

two

No.

168205

175C

140159AL

168026

50138E

1036AL 168263 168264 140594C 121678

1277E

1094E

168265

131504

51119J

46104

46105

229J 1120AL

131914

51283AL

131497

131291

1133E

64320

1133E 168030 168031

68489

1520J 131270

861C

853AL

131492

1492E

168033

168035

51369E 51047C

7071

50014F

68492

68493

176E

68494

198E 68495 68496

1733

68497

168036

168037

Plate

25602 25602

25602

25614 25614 25614 25614

25614

24602 25602

25602 25602

25602

25602 25613

25613 25616

25616

25616 25616 25616

25616

25616 25616

25616

25612 25616

25616

25623 25623 25623 25623

25616

25562

25562 25562 25562

25562 25562 25562 25562 25562

25562

PARTS

FOR

MACHINE

Looper(driving)

168018,168024

Looper(driving)

Looper(driving) EccentricConnection Position PloteScrew..

Looper(driving)

Looper

Gate Looper GoteArm with 1277E Looper Gote ArmHinge Screw Looper GoteArm Spring Looper Gote ArmStop Screw Looper GoteScrew (3)

LooperGote complete, Nos.168263,168264and three

1094E

LooperHolderwith Looper

HolderScrew

LooperNeedle Guard with46105 LooperNeedle Guord Pin LooperNeedle Guord Screw

Looper Set Screw Machine DrivingPulley"V" belt groove (outside diom. of

belt

groove 2.9 in.) with two 51283AL, for

belt

Machine

Driving

Needle

Bar (hollow)

Needle Bor complete (See Fittings Poge Nos.22

Needle Bor Bushing (lower)

Needle

Bor Bushing (lower) Set Screw

Needle Bor

Needle Bar Connecting Link

Needle Bar Connecting

Needle Bar Connecting LinkHinge Stud (hollow)

Needle Bar Connecting LinkHinge Stud Nut

Needle Bar Connecting LinkHinge Stud Oil Pod (wick)

Needle BarConnecting

Needle Bar Connecting LinkHinge Stud Set Screw

Needle Bar Connecting Stud with 1492E

Needle BarConnectingStud ClampingScrew

Needle Clamp (See FittingsPage Nos. 22 and 23)

Needle Clamp Thread Guide

Needle Guard (movable) (See

Needle

Oil Pipe(back of arm) with68497,foroilingFeed Oil Pipe(back of orm) Clamp

Oil Pipe(bockof arm)ClompScrew

Oil Pipe (bock of orm) Connection with68495 and two

Oil Pipe(bock oform)ConnectionCopScrew (2)

Oil Pipe (bock of arm) Connection Oil Pad (wick)

Oil Pipe(back oform) Coupling Oil Pipe(bock of arm) Coupling Nut (bross)

Oil Pipe (back of arm) Oil Pad (wick) Oil Pipe (front of arm, long) with two 1733

Oil Pipe(front of arm, long) complete, Nos.168036,

Bushing

131492

Guord

Guard Guard

Guord

Set

Screw (2)

Frame Hinge Pin Front Bearing

198E,for oiling Feed

Bearing

168038

ond

NO.

247-2

Name

Eccentric

Connection168025 with50138E,

and

168026

Eccentric

ConnectionCap (lower)Screw (2)

Eccentric

Connection Cap (upper)Screw(2)

Eccentric

Connection

Eccentric

Set Screw(3)

1120AL

PulleySet Screw (2)

(upper)

(upper) Set Screw

Link

168030 with68489 ond

Link

HingeStud Oil PlugScrew

(movable) Holder

(movoble) Holder Screw

(movoble) Screw

(movable) Screw

168039

Fittings

Washer

Rocking

Frame HingePinBock

Position

Plate

3/8

and

Poge Nos. 22 and 23)

in.

"V"

23)....

Rocking

11

12

PARTS

FOR

MACHINE

NO.

247-2

No. 131004 131798

1733

168038

168039

131003

131004

1733

68497

168040

131004

1733

131089 168041

168042

54038

131912

38456

1133E

131799

11173

131402 168043

131749

131750

38468

168044

1637J

131752

168046

2102

51570C

32572

54988

50326C

59539

131740

59537

59538

54279 168047

2102

51570C

140n3C

131809

198E

331J

190J 217J

453AL 453AL

161J 802X

176J

269W

208AL

335J

Plate

25562

25562 25562 25562 25562

25562

25614 25614 25614 25614

25614 25614

25616

25616 25616 25616 25616

25616 25616 25619 25619 25619

25619

25551 25551 25551

25551

25623 25551 25551 25551

25616 25616 25619

25619 25619 25619 25619

25619 25619 25619 25619 25616

25616

25619

168038

Nome

and

Coupling

168039

Guide Guide

Nut(brass)(2)

(2)

(wick)

Set Screw

Oil Pipe(frontof arm, long) Coupling(left) Oil Pipe(frontof arm, long)Coupling (right)

OilPipe (frontofarm, long)

Oil Pipe(frontof arm, long)Oil Lead with1733and

131003for oilingArmRotaryShaft Front Bearing

OilPipe (frontofarm,long)Oil Leadwith68497and

131003, for oilingFeed Connecting Rod

Oil Pipe(frontof arm, long) Oil LeadConnectionwithtwo

198E, for

Oil Pipe (frontof arm, long) Oil Lead ConnectionCop

Screw

(4).

O

il Pipe(frontof arm, long)OilLead Coupling

O

il Pipe(frontof arm, long)OilLead Coupling Nut (brass)

O

il Pipe (frontof arm, long)Oil Lead Oil Pad

o

ilPipe (frontof arm, short)with131089 and two 1733

o

il Pipe (frontof arm, short) Coupling(2)

o

ilPipe (frontof arm,short) Coupling Nut(brass)(2)

o

il Pipe (front of arm, short) Oil Wick (braided cotton)

o

il Splash Guard (front of arm)

o

il Splosh Guard (front of arm) Screw (3)

o

ilSplash Guard (side ofarm)

o

ilSplash Guard (sideofarm) Holder

o

il Splash Guard (sideof arm) Holder Screw

o

ilSplash Guard (side of arm) Screw

Presser

Bar (hollow)

Presser Bar Bushing(upper)

Presser Bar Bushing(upper) Set Screw Presser Bar LiftingBracket with 453AL

Presser Bar Lifting Bracket Presser Bar Lifting Bracket

Presser Bar LiftingBracket Set Screw

Presser Bar Lifting Lever Presser Bar Lifting Lever Extension Presser Bar Lifting Lever Extension Screw (2)

Presser Bar LiftingLever Hinge Screw

Presser Bar Spring

Presser BarSpring (auxiliary)

PresserBarSpring Stud PresserBarSpring complete, Nos.269W, 1637J,131749,

131750

and

Presser Foot (hinged) complete (See FittingsPage Nos. 22

and

Presser

Pressure Regulating Thumb Screw Pressure Regulating ThumbScrew LockNut Pressure Regulating Thumb Screw

Tension

Tension (thread covering) Controller EyeletScrew

Tension (thread covering) Disc(2)

Tension (thread covering) Regulating Thumb Nut Tension (thread covering) Releasing Disc Tension (thread covering) Releasing Pin Tension (thread covering) Screw Stud Tension(thread covering) Screw Stud 50326C with 51570C. Tension (thread covering) Spring

Tension(thread covering) Spring Bushing(large)

Tension (thread covering) Spring Bushing(small)

Tension (thread covering) Thread Guide (double)

Tension (thread covering) Thread Guide Tension (thread covering) Thread Guide Screw

Tension (under

Tension (under thread) Regulating Thumb Not

Tension

Tension (under

131752

23)

Foot

Screw

(thread covering)Controller Eyelet

thread)

Disc (2)

(under

thread)

Screw

thread)

Screw Stud 140113C with 51570C...

Washer

Stud

PARTS

FOR

MACHINE

No.

131740 25619

59537 25619 59538 25619

131696

68002 25619 Tension (upper thread) Bracket

376J 25619 Tension(upper thread) Bracket Screw

2102 25619 Tension (upper thread) Disc(4) 51570C 25619 Tension (upper thread) Regulating Thumb Nut (2) 32572 25619 Tension (upperthread) Releasing Disc(2) 54988 25619 Tension (upper thread) Releasing Pin(2)

68003 25619 Tension (upper thread) Releasing Shaft

54047 25619 Tension(upper thread) Releasing Shaft Crank with 624AL...

54048 25619 Tension(upper) Thread ReleasingShaft Crank

624AL

68261 25619

316C 25619

1547J 25619

50326C 25619 Tension(upper thread) Screw Stud (2) 59539 Tension (upper thread) Screw Stud 50326C with 51570C (2)

131741 25619 Tension (upper thread) Spring (2)

59537 25619

59538 25619 Tension (upper thread) Spring Bushing(small) (2)

54279 25619 Tension(upper thread) Thread Guide (2)

168145 25619

168209 25616 Thread Carrying Finger

50624E 25616 ThreadCarryingFinger

131811 25616 Thread Carrying Finger Holder(segment)with50624E 131812 25616 Thread Carrying FingerHolderBracket 131868 Thread Carrying Finger HolderBracket 131812with 212J,

1057AL

212J 25616 ThreadCarryingFingerHolderCap Screw

131813 25616 Thread Carrying Finger Holder Slide Block

226C 25616 ThreadCarryingFingerHolderSlide

131814 25616 Thread Carrying Finger Holder Slide BlockCrank with

171AL 25616 Thread Carrying Finger Holder Slide BlockCrank

131815 25616 Thread Carrying Finger Oscillating Arm(forked) and 131816 25616 Thread Carrying Finger Oscillating ArmSlide

147518 Thread Carrying Finger Oscillating ArmSlide

140645F

131817 25616 Thread Carrying FingerOscillating ArmSlide 131818 25616 Thread Carrying Finger OscillatingArmSlide 131819 25612 Thread Carrying Finger OscillatingArmSlide

Plate

25619

Tension

(under thread) Spring

Tension

(under thread) Spring

Tension

(under thread) Spring

Tension

(under

Tension

(upper thread) ReleasingShaft Crank Set Screw

Tension

(upperthread)

Tension

(upperthread)

Tension

(upperthread)

Tension

(upper thread) Spring

Tension

(upperthread) ThreadSeparator

226C,

131811,131813

25616 Thread Carrying Finger HolderBracketScrew (2)

171AL

Clamping Screw Presser Bar Bushing(lower)

131816

25616

Thread

with

Carrying

Screw

with 462AL

DrivingStud DrivingStud Bushing

50505C 25612 Thread Carrying FingerOscillating ArmSlide

462AL

25616 Thread Carrying FingerOscillatingArmSlide 131820 25616 Thread Carrying FingerOscillatingArmSlide 131028 25616 Thread Carrying FingerOscillating ArmSlide

131821 25616 Thread Laying Finger

168048 25616 Thread Laying Finger Holder with 1057ALand two

1057AL

25616 Thread LayingFingerHolder ClampingScrew

DrivingStud BushingSet Screw

Set

Screw

Shaft

Shaft Oil Screw Plug

50370AL

thread)

131817

Finger

NO.

Name

Thread

Releasing Releasing Releasing

Clamping

and

Oscillating

247-2

Bushing Bushing

Guide

ShaftSpring ShaftStop Screw ShaftStopScrewNut

Bushing

Screw

and

131814

Block

140645F

Arm

(large) (small)

(double)

(large) (2)

Cap Screw

Slide

Link

Block Block

Block

Block Block Block Block Block Block Block

Cop

Holder

Holder Holder Holder Holder Holder Holder

13

14

PARTS

FOR

MACHINE

NO.

247-2

No.

50370AL

53225

190J

168049

889AL

38210

168050

46247

176J

168051

50150AL

168052

168053

176J

51323J

17022

168054

168055

140180J

7071

168056

220E

168057

168058

207J

236J

168065

50231W

17022

168059

131411 168060

965D

168061

190J

7071

168130

223J

168045 131496

997J

742F

Plate

25616 25619

25619

25613

25621

25621 25621 25613 25613

25621 25621 25621 25621 25621 25621 25621 25621

25621

25613 25613 25621 25621

25621 25621 25621

25621

25621 25619 25619 25619 25616 25616

25619 25619

25619

25623

Thread

Thread Thread Thread Thread

Thread

Thread Thread Thread

Thread

Thread Thread

Thread

Washer

Thread (under)Take-up StripperPlate

Thread (under)Take-upStripper Plate Bracket

Thread (under)Take-upStripperPlate Bracket131411

with 38210,46247, 50231W, 51323J, 168050,168052,

168053,

168065, two

and

three

Thread(under)Take-upStripperPlate

Thread (upper) Eyelet

Thread (upper) EyeletScrew

Thread (upper) EyeletScrewWasher

Thread (upper) Take-up with223J

Thread (upper) Take-up ClampingScrew

Thread (upper)Take-up(auxiliary)

Thread(upper)Take-up

Thread (upper)Take-up(auxiliary)ClampScrew

Throat Plate (See FittingsPage Nos. 22 and 23)

Throat

Plate Screw (2)

Name

168054,168055,168057,168058,168059,

each

176J

207J, 236J,

7071,17022,140180J

(auxiliary)

Bracket

Clamp

Screw

LIST OF PARTS COMPLETE

MACHINE

FOR JOINING CUFFAND NEEDLES.

NEEDLE. SPEED

TIONS

ONE LOOPER. GAUGES

PERFORMED.

2800.

FOR

No.

247-3

ANKLE

PIECES

TO KNIT

DEPENDINGONMATERIAL USED

3/32"

OR

UNDERWEAR.

1/8"

BETWEEN

AND

THREE

EACH

OPERA

is

No.

^68001

68428

68429 25551 Arm BottomCover Gasket (cork)

1057AL 25551 Arm Bottom Cover Screw (4)

Plate

25551

Arm,upper

131022

Arm

Bottom

andlower

Cover

Name

(solid)with 51422J, 68483 and four

50608R 25551 ArmHole PlugScrew,for access to Crank ConnectingRod

139017 25551 Arm Hole PlugScrew Washer

68350 25612 ArmOil Cup, for oiling Arm RockShaft Front Bearing

131864 25613 ArmOil Cup, for 131866

131865 25613 Arm Oil Cup Oil

131866 25613 ArmOil CupwithOil Gauge complete,Nos. 131864 and

131319 25612 Arm Oil Cup Oil Pod (braided cotton) for 68350

131937

1309C 25612 Arm

131056 25612 Arm

68433 25612 Arm RockShaft Bushing(back)

68435 25612 Arm

131095 25612

446AL 25612 Arm RockShaft Bushing(back) Set Screw

68436 25612 Arm Rock

423AL 25612 Arm

131072 25613 Arm RockShaft Crank, back (ball bearing, solid, with two

50083AL 25613 ArmRockShaft Crank (bock) Set Screw (2)

131456 25612 Arm RockShaft Flanged Bushing (front)

453AL 25612 Arm RockShaft Flanged Bushing(front) Set Screw

42365 25612 Arm RockShaft Oil Pad (braided cotton) for oiling Back

54969 25612 Arm RockShaft Oil Pad (braided cotton) for oiling

1235F 25612 Arm RockShaft Oil Plug Screw

168002 25613 ArmRotary Shaft with 168215

168003 Arm Rotary Shaft 168002 with 131930

131366 25613 ArmRotaryShaft BallBearing (back) (2)

131478 25613 Arm Rotary Shaft BallBearing (back) Case

131479 ArmRotary Shaft BollBearing (back) Case 131478with

25612

131526 ArmRotary Shaft BallBearing (back) Case with Ball

131369 25613

205C 25613

131370 25613 ArmRotary Shaft BallBearing (back) Case PositionStud (3)

429C 25613 Arm Rotary Shaft BallBearing (back) Case Set Screw

131480 25613 ArmRotary Shaft Ball Bearing (back) Spacing Collar

131366 25613 Arm RotaryShaft BallBearing (intermediate)

131481 25613 Arm RotaryShaft BallBearing (intermediate) Case

1304C 25613 ArmRotary Shaft BallBearing (intermediate) Case Set

131482 25613 ArmRotary Shaft Ball Bearing (intermediate) Collar with

457AL 25613 Arm Rotary Shaft BallBearing (intermediate) Collar Set

(upper bearing)

Gauge

131865, for filling oilreservoir

Arm Rock

Arm

Shaft

and

50505C

Rock

Shaft AdjustingScrew

Rock

Shaft AdjustingScrew Washer

Rock

Shaft

Rock

Shaft

Rock

Shaft

50083AL

Bearing

Front

and

131819

Bushing

Bushing (intermediate)

Bushing

Crank

with 853AL, 1235F,

(back) Cap

(back)Cap Washer (fiber)

(intermediate) Set Screw

Intermediate Bearing

131369

and

three

205C

Bearings complete, Nos. 131479,131480

131366

Arm

RotaryShaft

Arm

Screw

two

Screw (2)

Rotary

457AL

Shaft

Boll

Bearing(back)Cose Cap

Ball

Bearing(back)CaseCap Screw

and

168010

and

two

(3)...

PARTS

FOR

16

MACHINE

NO.

247-3

No.

131959

68497

*68483

51422J

131028

131457

42367

54218

168215

131276

131909

131280

1289X

131910

131911

68448

1057AL

168255

68107

38419

68108

168256

1011F

50473F

'131926

131927

51715AL

131928

1057AL

131760

131761

131762

29234

1053E

50190W

168006 168007

131766

68467

761E

144D

665J

330J

889AL

207E

Plate 25613 25613

25613 25613 25613 25613 25613 25613

25613

25613 25613 25551 25551 25551 25551 25551 25551

25551 25551

25615 25615 25615

25615

NOTE:

25615 25615 25613

NOTE:

25613

25617

25617 25617 25617 25617 25618

25618

Arm

RotaryShaft

Arm

Rotary

Arm

Rotary

Arm

Rotory Rotary

Arm

ArmRotaryShaft

Arm

RotaryShaft

ArmRotaryShaft

Arm

Rotary

(braided

ArmRotaryShaft

(braided

ArmRotaryShaft OilWick

Arm RotaryShaft Screw

Arm

Side

ArmSide Cover Cop ArmSide Cover Cop PositionPin ArmSide Cover Cop Screw

Arm Side Cover Cop Spring

ArmSide Cover (oil vent) complete, Nos. 1289X,131276,

Arm

Cloth Cloth

Cloth Plate Slide Spring Cloth Plate Slide Spring Screw (2) Cloth Plate Slide complete, Nos. 38419,68107 ond two

ClothPlatecomplete, Nos. 1350C,6465, 68108,168255

No. 168256 is regularly furnished with this machine, unless

otherwise specified on order.

Cloth

Cloth Plate Screw (right)

Crank Connecting Rod with two

When No. 131926 is required for repairs, the Connecting

Rod and Arm

be furnished. All Agency orders for this part must state the

machine number for which it is required, in order to obtain

correct

Crank Connecting Rod 131926 with 131072

Crank Connecting Rod Cap (lower) Screw Stud (2) Crank Connecting RodCop (lower) Screw Stud Nut (2)

Cronk Connecting RodCop (lower)Screw Stud Nut

CrankConnectingRodCop (upper) Screw (2)

Face

Face Face

Face Plate (upper halO Face Plate (upper half)

Face Plate (upper half) PositionPlate Screw

Face Plate (upper half)ThumbScrew

Feed

Feed (back) Bar complete, Nos. 1147AL,50429AL,68467,

Feed (back) Bar Hinge Pin Feed (back) Bar Hinge PinSet Screw

Feed (bock) Bar Wearing Plate

Feed (back) BarWearing Plate Screw(2)

Feed (back) Dog (See FittingsPage Nos. 23, 24, 25 and 26)

Cover (oil vent)

131280,131909

Side

Cover

Side

Cover

Plate Plate

665J

and

168260

Plate

131927

Needle

Washer

Plate

Plate (lower half) Plate (lower half) Screw (2)

(back) Bar

168C06

Name

Bushing

Shaft

cotton)

Slide

Screw

and

Rock

Bar

(2)

(lower

and

131928

two

(front)

Bushing

(front)

Bushing

Bushing Bushing

Bushing

and

Gasket

Screw (4)

(left) (2)

Bearing

(front)

Bracket

(front)BracketScrew (front)Oil Plug

(front)

Position

(intermediate) (intermediate)

(intermediate) OilPad, lower

(intermediate)Oil Pad, upper

131910

each

1057AL,5171 SAL,

Shaft Crank (back) fitted together, will

Stroke.

half)

Gasket

(cork)

Position

Plate

207E

OilPad

with

761E

Screw

Position

(wick)

Screw

Lock

No.

157J

50429AL 147568 147569

51408AL 147570

147571

131769

704E

131770

1147AL

190J

168009

131500

168010

896AL

1057AL

131772

59343

735AL

68497

134260

51061AL

7071

217J

138306

168011

168012

624AL

1103C 131773 168303

131775

57235

453AL

1036AL 131776

131777

131867

172J

50183F

1520J

359C

1654C

9525 131778

170C

1226C

910AL

1735C

175C

1735C

131779

Plate

25627 25618

25618 25618 25618

j}56T8

25618

25627

25618 25613

25613 25613 25618

25618 25618 25613

25613 25613

25613

25613 25613 25613 25618

25618

25618 25618

25618

25618 25618

25618 25618 25618 25618 25618 25618 25618 25618 25618 25618

25618

PARTS

FOR

MACHINE

Feed (back) Dog Screw

Feed (back) DogStop Screw

Feed

(front)

Feed (front)Bar Feed DogSeat (adjustable)

Feed (front) BarFeed Dog Feed (front) Bar complete, Nos. 51408AL, 147568

147569

Feed (front) Bar 147570 with 131769

Feed Feed Feed Feed

Feed (front) Dog (See Fittings Page Nos. 23, 24, 25

Feed

Feed Connecting Rod with 1057AL,

two

Feed

Feed Connecting RodCap Screw(2) Feed ConnectingRodClamping Screw

Feed Connecting RodHinge Pin (eccentric) Feed Connecting Rod Hinge Pin Collar with 735AL

Feed Connecting RodHinge Pin Collar Set Screw

Feed Connecting Rod Oil Pad (wick) Feed Connecting Rod Oil Pad Retainer

Feed Feed Eccentric Clamping Washer (2) Feed

Feed EccentricLubricating Pad (wood)

Feed

two

Feed Lifting Eccentric with

Feed LiftingEccentricSet Screw (3)

Feed Regulating Screw

Feed Rocking Frame with 889AL

Feed Rocking Frame 131773 with 61C, 704E, 1655E,

51700C,

131780,131781,14031IC,

Feed RockingFrame Hinge Pin

Feed

Feed Gathering Feed Actuating Lever Gathering Feed Actuating LeverBracket with 175C, 910AL

and

Gathering Feed Actuating LeverBracket 131777 with

359C, 1226C, 1520J,

1654C

Gathering FeedActuating LeverBracketScrew (2)

Gathering Feed Actuating LeverHinge Screw

Gathering FeedActuating LeverHingeScrew Nut Gathering FeedActuating Lever Gathering Feed ActuatingLever Gathering FeedActuating Lever Gathering Feed ActuatingLever

Gathering Feed Actuating

GatheringFeedActuating

Gathering

GatheringFeed

Gathering FeedActuating LeverStop Screw(lower) Nut

GatheringFeed Actuating

GatheringFeed

Gathering Feed Regulator withtwo 1057AL

Baij

(front) Bar (front) Bar (front) Bar Slide Bar (front) Bar Slide Bar Set Screw

(front) Dog Screw

Bar

Slide

896AL

Connecting Rod

Eccentric Eccentric Eccentric

each

217J,

59343,131766,131772,131775,131779,

Rocking

two

1735C

Feed

NO.

247-3

Name

Seat

Screw

and

Guide Guide

Block

Screw

131500

with 168011

131770

68497,134260

BodySet Screw (3) ClampingWasher Screw(2) (adjustable) complete, Nos. 1103C, 138306,

7071

and

three

51061AL

three

624AL

and

two 1036AL

147571

and

168007

FrameHingePin

Frame HingePin

Bushing

(2)

Set Screw(2)

Frame Hinge PinSet Screw (2)

9525,

50183F,

131776

and

Locking

Screw

Locking

Screw ScrewNut ScrewWasher

Screw

Stud

Screw

(lower)

Screw

(upper)Nut

Lock

Actuating

Locking Locking

Lever

Spring

Lever

SpringScrewStud

Lever

Spring

Lever

Stop

Lever

StopScrew(upper)

Lever

Stop

and

two

Nut....

(lower).

(upper)

17

26)

18

PARTS

FOR

MACHINE

NO.

247-3

No.

1057AL

131780 140311C

51700C

131781

61C

1655E

168014

168015 168016

168208

168238

168017

168018

1057AL

68497

1231E

1497C 168012 168019

132583

132584

223C

168020

168021

168022

448AL

168023

624AL

168024

168025

168205

175C

140159AL

168026

50138E

1036AL

168259

131785

1350C 6465

131787

190J

127784

1094E

168260

131504

51119J 46104

Plate

25618

25618 25618

25618

25602

25613 25602 25602

25602

25613

25602

25602 25602

25602 25602 25615 25615 25615 25615 25615

25615 25615 25615

25602 25602

25602

Gathering Feed Regulator Clamping Screw (2)

Name

Gathering Feed Regulator Connection

Gathering Feed RegulatorConnection HingeScrew (back)..

Gathering Feed Regulator Connection Hinge Screw (back)

Not

Gathering Feed Regulator Connection Hinge Screw (back)

Nut

Washer

Gathering Feed Regulator Connection Hinge Screw (front)..

Gathering Feed Regulator Connection Hinge Screw (front)

Nut

Looper

Looper168014 with229J and 46104

Looper Carrier

LooperCarrier 168016 with132583, 168019,168020,

168021

and

LooperCarrier 168208 with168017 and 168205

Looper Carrier Shaft with 1231E

Looper Carrier Shaft Crank with two 1057AL Looper Carrier ShaftCrank Clamping Screw (2)

LooperCarrier Shaft Oil Pad (wick)

Looper Carrier ShaftPlug Screw Looper Carrier ShaftSet Screw Looper (avoiding motion) Eccentricwith three 624AL Looper (avoiding motion) EccentricConnection with223C...

Looper(avoiding motion)EccentricConnection Hinge Pin

with

168023

132584

Looper(avoiding motion)Eccentric Connection HingePin

Oil

Wick

Looper (avoiding motion)EccentricConnection Hinge Pin

Set

Screw

Looper (avoiding motion) Eccentric Connection Holder Looper (avoiding motion) Eccentric Connection Holder

Screw Bushing

Looper (avoiding motion) EccentricConnection Holder

Screw Bushing Bearing

Looper (avoiding motion) EccentricConnection Holder

Screw BushingSet Screw (2)

Looper (avoiding motion) EccentricConnection Holder

Thrust Bearing

Looper (avoiding motion) EccentricSet Screw (3)

Looper(driving) Eccentricwiththree 1036AL

Looper (driving) EccentricConnection withtwo each 175C

and

140159AL

Looper (driving) EccentricConnection 168025 with

50138E,

168259,

168018,168024

Eccentric

(driving)

Eccentric

Gate

Arm

Gate

Arm Hinge Screw

Gate

Arm Hinge Screw Friction

Lock

Spring Screw

Lock

Gate

Needle

Spring Screw Wosher (2)

Screw (3)

two

127784

Guard

Looper(driving)

Looper

Looper (driving) EccentricConnection PositionPlate Looper (driving) EccentricConnection PositionPlate Screw.. Looper (driving) EccentricSet Screw (3)

Looper

Looper Looper Looper

Looper Gate LockSpring

LooperGate LooperGate

Looper Looper Gate complete, Nos. 190J, 131785,131787,

Looper Holder with 1120AL

Looper Holder Screw

Looper

and

168026

ConnectionCop (lower)Screw(2)

Connection

Cap (upper)Screw(2)

Washer

and

three

1094E

with

46105

PARTS

FOR

MACHINE

NO.

247-3

19

No.

46105

1120AL

131914

51283AL

131497

131291

1133E

64320

1133E 168030 168031

68489

1520J

131270

131492

1492E

168033

168035

51369E

51047C

7071

68492

68493

68494

68495

68496

1733

68497

168036

168037

131004

131798

1733

168038

168039

131003

131004

1733

68497 168040 131004

1733

229J

861C 853AL

904F

176E

198E

Plate

25602 25602 25602 25613

25613

25617

25617 25617

25617

25612 25617 25617

25617

25627

25627 25627 25617 25562

25562 25562

25562

25562 25562 25562

25562

25562 25562 25562

25562

25562 25562

LooperNeedle Guard Pin LooperNeedle Guard Screw

Lcoper Set Screw

Machine DrivingPulley,"V" belt groove (outside diam. of

belt groove 2.9 in.)with two 51283AL,for

belt.

Machine DrivingPulleySet Screw (2)

Needle

Bar (hollow)

Needle Bar complete, (See Fittings Page Nos. 23, 24, 25

and

26)

Needle

Bar Bushing (lower)

Needle Bar Bushing(lower) Set Screw

Needle Bar Needle Bar

Needle

Bar Connecting Link

Needle Bar Connecting

131492

Needle Bar Connecting

Needle Bar Connecting Needle Bar Connecting Needle Bar Connecting Needle Bar Connecting

Needle Bar Connecting Stud with 1492E

Needle Bar ConnectingStud ClampingScrew

Needle Clamp (See Fittings Page Nos. 23, 24, 25

Needle Clamp Thread Guide Needle Guard (movable) (See

and

26)

Needle Guard (movable) Holder Needle Guard (movable) Holder Screw Needle Guard (movable) Screw Needle

Guard

Needle

Set

OilPipe (back of arm)with68497, for oilingFeed

Frame Hinge Pin Front Bearing

OilPipe (back of arm) Clamp

OilPipe(backofarm)ClampScrew

Oil Pipe (back of arm) Connection with68495 and two

198E,

foroilingFeed

Bearing

OilPipe(back ofarm)

Oil Pipe(bock of arm) ConnectionOil Pad Oil Pipe(back of arm) Coupling Oil Pipe(back of arm) Coupling Nut (brass)

Oil Pipe (back of arm) Oil Pad (wick)

Oil Pipe (front of arm, long) withtwo 1733

OilPipe (front of arm, long) complete, Nos.168036,

168038

OilPipe(frontof arm,long) OilPipe(frontof arm,long)

OilPipe(frontofarm,long)

Oil Pipe(frontof arm, long) CouplingOil Leadwith1733

and 131003,for oiling

Oil Pipe (front of arm, long) Oil Leadwith 68497 and

131003, for oiling Feed Connecting Rod

Oil Pipe (front of arm, long) Oil Lead Connection withtwo

198E,for 168038 and 168039 (2)

Oil Pipe(frontof arm, long) OilLeadConnection Cap

Screw

(4)

OilPipe(frontof arm,long)Oil Lead

Oil Pipe(front of arm, long) Oil LeadCoupling Nut (brass).

Oil Pipe (front of arm, long) Oil LeadOil Pad

Oil Pipe (front of arm, short) with 131089

Oil Pipe(frontof arm, short)Coupling(2)

OilPipe(frontof arm,short)

Name

Bushing

(upper)

Bushing

(upper) Set Screw

Link

168030 with6848?

Link

Hinge Stud (hollow) Link Link

Hinge Stud Oil Pod (wick) Link Link

Hinge Stud Set Screw

(movable) Screw Washer

Screw (3)

Rocking

Connection

and

168039

Coupling

Arm

3/8

in."V"

and

Hinge Stud Nut Hinge Stud Oil PlugScrew

and

Fittings

Page Nos.23,24, 25

Rocking

Frame

Hinge

Back

CopScrew(2)

(wick)

(left)

(right)

Nut(brass)(2)

Rotary

ShaftFrontBearing...

Coupling

(wick)

and

two 1733

Coupling

Not(brass)(2)

26)...

20

PARTS

FOR

MACHINE

NO.

247-3

No. 131089 168041

331J

168042

54038

190J

217J

131912

38456

1133E

131799

11173

453AL

453AL 131402 168043

161J

802X

131749 131750

38468

168044

176J

269W

1637J

131752

168046

208AL

2102

51570C

32572

.54988 50326C

59539

131740

59537

59538 54279

168047

335J

2102

51570C

140113C

131809

131740

59537 59538

131696

54245

376J

2102

51570C 32572

54988 54246

54047

54048

624AL

68261

316C

Plate

25615 25615 25615

25615 25615 25615 25617 25617

25617 25617 25617

25617

25617 25620

25620

25620 25620 25551

25551

25551 25551

25627 25551 25551 25551 25617 25617 25620

25620

25620 25620 25620 25620 25617 25617

25620 25620

25620

25620 25620 25620

25620

25620 25620

25620

OilPipe(frontof arm,short)Sleeve

Name

Oil Splash Guard (front of arm)

OilSplashGuard (frontof arm)Screw (3)

Oil Splash

Oil Splash Guard (side of arm) Holder Oil Splash Guard (side of arm) HolderScrew

Oil Splash

Presser Bar (hollow)

PresserBar PresserBar

Presser Bar LiftingBracket with 453AL

Presser Bar LiftingBracket Guide

Presser Bar Lifting Bracket

Presser Bar LiftingBracket Set Screw Presser Bar LiftingLever

Presser Bar LiftingLever Extension

Presser Bor LiftingLever ExtensionScrew (2) Presser Bar LiftingLeverHinge Screw Presser Bar Spring

Presser BarSpring (auxiliary)

Presser Bar Spring Stud Presser Bar Spring complete, Nos. 269W, 1637J, 131749,

PresserFoot(hinged) complete(See

Presser

Pressure Regulating Thumb Screw

Pressure Regulating Thumb Screw LockNut Pressure Regulating Thumb Screw

Tension

Tension(thread covering) Disc(2)

Tension(thread covering)RegulatingThumbNut Tension(thread covering)Releasing Tension(thread covering)Releasing Pin

Tension (thread covering) Screw Stud Tension (thread covering) Screw Stud 50326C with 51570C

Tension

Tension(thread covering)Thread Guide Tension(thread covering)Thread Guide Screw

Tension (under thread) Disc(2)

Tension(under thread) RegulatingThumbNut

Tension(under thread) Screw Stud

Tension(under thread) Screw Stud 140113C with51570C...

Tension

Tension Tension

Guard

(side of arm)

Guard

(side of arm) Screw

Bushing

(upper)

Bushing

(upper) Set Screw

Guide

131750

and

131752

23, 24, 25

and

Foot

26)

Screw

(threadcovering) Controller Eyelet

(thread

covering)

(thread covering)Spring

(thread

covering)

(thread

covering)

(thread

covering)

(underthread) Spring

(underthread)

(underthread) Spring (underthread) ThreadGuide (double)

Controller

Spring

Spring ThreadGuide(double)

Spring

Bushing

Set Screw

Fittings

Washer

Eyelet

Disc

Bushing

(large)

(small)

Page Nos.

Screw

(large)

(small)

Tension(upper thread) Bracket

Tension(upper thread) BracketScrew Tension(upper thread)

Tension

(upper

Tension

(upperthread)

Tension

(upperthread)

Tension

(upperthread)

Tension(upper thread) Releasing Shaft Crank with624AL...

Tension(upper thread) ReleasingShaft Crank

Tension (upper thread) Releasing Shaft Crank Set Screw

Tension

(upperthread)

Tension

(upperthread)

thread)

Disc

(6)

Regulating

Releasing Releasing

Releasing

Releasing Releasing

Thumb

Disc

(3)

Shaft

Spring

ShaftStop

Nut

(3)

Link

Screw

PARTS

FOR

MACHINE

maimn

NO.

247-3

52

21

No.

1547J 50326C 59539

131741

59537 59538

54279

168144 168209

50624E

131811

131812

131868

1057AL

212J

131813

226C

131814

171AL

131815

131816 147518

140645F

131817

131818

131819

50505C

462AL

131820

131028

131821 168048

1057AL 50370AL 53225

190J

168049

889AL

38210

168050

46247

176J

168051

50150AL

168052 168053

176J 51323J 17022

Plate

25620

25620 25620 25620 25617 25617 25617 25617

25617 25617

25617

25612

25617

25617 25617 25620 25620 25613 25613 25622 25622 25622 25622

25613 25613

25622

Tension(upper thread) Releasing Shaft Stop Screw Nut Tension(upper thread) Screw Stud (3) Tension (upper thread) Screw Stud 50326C with 51570C (3) Tension(upper thread) Spring (3) Tension(upper thread) Spring Bushing(large) (3)

Tension(upper thread) Spring

Tension (upperthread) Thread Guide (3) Tension (upperthreod) Thread Separator Thread Carrying Finger Thread Carrying Finger Clamping Screw

Thread Carrying Finger Holder (segment) with 50624E Thread Carrying Finger Holder Bracket

Thread Carrying Finger Holder Bracket 131812 with212J,

226C,

131811,131813

Thread Carrying Finger Holder Bracket Screw (2)

Thread Carrying Finger Holder Cap Screw

Thread Carrying Finger Holder Slide Block

Thread Carrying FingerHolder Slide

Thread Carrying Finger Holder Slide BlockCrank with

171AL

Thread Carrying Finger Holder Slide BlockCrank

Clamping Screw

Thread Carrying Finger Oscillating Arm (forked)

Presser Bar Bushing (lower)

Thread Carrying Finger Oscillating Arm Slide Block

Thread

Carrying

131816

Thread Carrying Finger Oscillating ArmSlide

Screw

Thread Carrying Finger Oscillating ArmSlide Block

Holder

Thread Carrying Finger Oscillating ArmSlide BlockHolder Thread Carrying Finger Oscillating Arm Slide BlockHolder Thread Carrying Finger Oscillating ArmSlide BlockHolder

Thread Carrying Finger Oscillating ArmSlide Thread Carrying FingerOscillating ArmSlide BlockHolder Thread Carrying Finger Oscillating ArmSlide BlockHolder

Thread Laying Finger

Thread Laying Finger Holder with 1057AL

Thread

Thread Laying Finger Set Screw (2)

Thread (under) Eyelet(back) Thread (under) Eyelet(back) Screw Thread (under) Nipper Cam with Thread (under) Nipper Cam Set Screw Thread (under) Nipper Spring (lower) Thread (under) Nipper Spring (upper)

Thread(under)Nipper Spring (upper)Stop

Thread (under) Nipper Spring Screw

Thread (under)Take-up (left)with three 50150AL Thread (under) Take-up(left) SetScrew (3)

Thread(under)

Thread (under) Take-up(left) Stripper Bracket

Thread (under)Take-up(left)Stripper BracketScrew(2)

Thread(under)

with

DrivingStud DrivingStud Bushing DrivingStud BushingSet Screw

Set

Screw

Shaft

Oil Screw Plug

50370AL

Laying

Thread(under)

Name

Bushing

and

131814

Finger Oscillating Arm Slide Block

with

131817

and

140645F

462AL

FingerHolder ClampingScrew

889AL

Take-up

(left)Stripper

Take-up

(left)StripperScrew

Take-up

(left)StripperScrewWasher

(small)(3)

Block

and

Cap Screw

and

Block

two

Cap

Holder

22

PARTS

FOR

MACHINE

NO.

247>3

No.

168225

168226

140180J

7071

168056

220E

168057 168058

207J 236J

168065

50231W 17022

168059 131411 168227

965D

168061

190J

7071

168130

223J

168045 131496

997J

742F

Plate

25622 25622 25622 25622

25613 25613

25622 25622

25622

25622 25622 25622

25622 25620 25620 25620 25617

25617

25620 25620 25620

25627

(2)

46247,50231W,

each

176J

Name

207J,

51323J,

236J,

7071,17022,140180J

168050,168052,

24,25

and 26)

Thread (under)Take-up(left)Thread Guide (left)

Thread (under)Take-up(left)Thread Guide (right) Thread (under)Take-up (left)Thread GuideScrew(2)

Thread (under) Take-up (left)Thread Guide Screw

Washer

Thread (under)Take-up (right) Thread (under)Take-up (right)Screw (2)

Thread (under)Take-up(right)Stripper

Thread (under)Take-up (right)Stripper Bracket Thread (under)Take-up (right)Stripper BracketScrew (2). Thread (under)Take-up (right)Stripper Screw (2) Thread (under)Take-up (right)Thread Guide Thread (under) Take-up (right)Thread Guide Screw Thread (under) Take-up (right) Thread Guide Screw

Washer

Thread (under)Take-up Stripper Plate

Thread (under) Take-upStripper Plate Bracket Thread (under) Take-upStripper Plate Bracket131411

with

38210,

168053,168057,168058,168059,168065,168225,

168226, two

and

three

Thread (under)Take-upStripper Plate BracketScrew

Thread (upper) Eyelet Thread (upper) Eyelet Screw Thread (upper) Eyelet ScrewWasher

Thread (upper) Take-upwith 223J Thread (upper) Take-upClamping Screw Thread (upper) Take-up (auxiliary)

Thread (upper)Take-up(auxiliary) Clamp

Thread (upper) Take-up (auxiliary)Clamp Screw

Throat Plate (See FittingsPage Nos. 23,

Throat Plote Screw (2)

FITTINGS

168272 25623 Feed (back) Dog, 14 teeth (16 teeth to the inch)for 168283 25624 Feed (bock) Dog, 14 teeth (16 teeth to the inch) for 168282 25623 Feed (front) Dog, 7 teeth (16 teeth to the inch)for

168284 25624 Feed (front) Dog, 7 teeth (16 teeth to the inch)for

131497

25623

168170 25623 Needle Clompwith two50014F,for 168033 25623 Needle Clamp Thread Guide for 168169

168169 25623 Needle Barcomplete, for

168034

50014F

26276 25623 Presser Foot Hinge Pin

131800 131801

147547 25623 Presser Foot RollerHinge Pin

46087

25623 25623

25623

FOR

SOLID

For

1/8

in.to

and

5/32

in.,

7/32

and

5/32

in.,

7/32

Needle

Bar (hollow)

gauges

131497,168033

Needle

Guard

Needle

Set Screw (2)

Presser

Foot

Presser

Foot

Presser Foot

MACHINE

TUBE

BORDERS

1/4

in. Gauges

in. gauges, for 168273

in.

and

1/4

in. gauges, for 168302

in.gauges, for 168273

in.and

1/4

in.gauges, for 168302

1/8

and

168170

(movable)

Plate Roller

Shank

No.

247-2

1/8

3/16

1/8

in.to 1/4in.

in.to 1/4in.gauges, Nos.

1/8 3/16

in.

No.

131802

168273

168302

FITTINGS

Plate

25623

25624

FOR

MACHINE

PresserFoot(hinged)with Rollercomplete,for SolidTube

Borders,for

46087,131800,131801

ThroatPlate for

and

168282

Throat Plate for

168283

and

1/8

3/16

168284

No.

Name

in.to

in.and

247-2

1/4

in. gauges, Nos. 26276,

and

147547

5/32

in.gauges, for 168272

in.,

7/32

in.and

1/4

in.gauges, for

23

FITTINGS

168272 25625 Feed (back) Dog, 14 teeth (16 teeth to the inch) for 168283 25626 Feed (bock) Dog, 14 teeth (16 teeth to the inch)for 168282 25625 Feed (front) Dog, 7 teeth (16 teeth to the inch)for 168284 25626 Feed (front) Dog, 7 teeth (16 teeth to the inch) for

131497

168170 25625 Needle Clompwith two50014F, for

168033 25625 Needle Clamp Thread Guide for 168169

168169 25625 Needle Barcomplete, for

25625

168034 25625 Needle

50014F

26276 131803 25625 Presser Foot Plate (left)

131804 25625 PresserFootPlate (left)

109J 25625 PresserFootPlate (left)

54865 25625 Presser FootPlate (left)

131805 25625 Presser Foot Plate (right)

131806

131807 25625 PresserFoot(hinged) complete, for SplitTube Borders,for

25625

25625 Presser Foot Hinge Pin

25625

168273 25625 Throat Plate for 1/8in.and

168302 25626 ThroatPlate for

FOR

MACHINE

SPLIT

TUBE

BORDERS

1/8

in. to

1/4

in.

end

5/32

in. gauges, for 168273

in.,

7/32

in. and

and

5/32

in. gauges, for 168273

in.,

7/32

Needle

Presser

in. and

Bar (hollow)

gauges

131497,168033

Guard

(movable)

Set Screw (2)

Foot

Shank

1/8

in. to

1/4

131803,131804,131805

and

168282

168283

in. gauges Nos. 109J, 26276, 54865,

3/16

and

168284

No.

Gauges

1/4

in. gauges, for 168302

1/4

in. gauges, for 168302

1/8

168170

Lock

in.,

7/32

in. to

Spring

SpringScrew

Spring Screw

and

131806

5/32

in.gauges, for 168272

in.and

ond

247-2

1/8

in.to

1/4

in.gauges, Nos.

Friction

1/4

in.gauges, for

1/4

1/8

3/16 1/8 3/16

in.

Washer

in.

FITTINGS

FOR

JOINING

3/32

NOTE:

168257 168258 25627 Feed (front) Dog, 10 teeth (16 teeth to the inch) for 53173...

131497

168206 25627 Needle Bar complete, Nos. 131497,168033 and 168207....

168207 25627 Needle Clamp withthree 904F

168033 25627 Needle Clamp Thread Guide

168243

904F

25627

25627 25627

FOR

MACHINE

CUFF

AND

ANKLE

PIECESTOKNIT

in. -

3/32

in.,

and

1/8

The following ports are regularly furnished with this ma

chine, unless otherwise specified on order.

Feed (bock) Dog, 12 teeth (16 teeth to the inch) for 53173...

Needle

Bar (hollow)

Needle

Guard

Needle

(movable)

Set Screw (3)

No.

247-3

UNDERWEAR

in.

-1/8

in. Gauges

24

FITTINGS

FOR

MACHINE

No.

247-3

No. 26276 53169

46087

53170

53173

36649 25627 Edge Guide for Cuffs and Anklets. 36650 25627 Edge Guide for Collarettes

25627 25627

25627

EDGE

Plate

Presser

Foot

Presser

Foot

Presser

Foot

PresserFoot(hinged)complete, Nos. 26276,46087 and

53169

Throat

Plate

GUIDES

FOR

Hinge

Plate

Shank

for

168257

MACHINE

Name

and

1443J 25627 Edge Guide Screw (2)

168216

68107 38419

665J

68108

168217

168220

168221

168213

131785

1350C

6465

131787

190J

127784

1094E

168214

131497

168206

168207

168033 168243

904F

168222

1449F 24701 26276

168223

54411

50429AL

460AL

168224

168228

FITTINGS

3/32 in.-

25628

25628 25628

25628

25628 25628 25628

25628

25628 25628 25628

25628

25628 25628

25628

FOR

MACHINE

FOR

HEMMING

3/32

Cloth

Plate

Cloth

Plate

ClothPlateSlideSpring

ClothPlate Slide SpringScrew (2)

ClothPlateSlidecomplete,Nos.38419, 68107 and two

665J

Cloth Plate complete, Nos. 1350C, 6465, 68108,168214

and

168216

Feed (back) Dog, 12 teeth (16 teeth to the inch)for 168228

Feed (front) Dog, 9 teeth (16 teeth to the inch) for 168228...

Looper

Gate

Looper

Gate

Looper

Gate

Looper

Gate

Looper

Gate Looper Gate Looper Gate LockSpring Screw Washer (2)

Looper

Gate

LooperGate complete, Nos. 190J, 131785,131787,

168213,

Needle

Bar (hollow)

Needle Barcomplete, Nos.131497, 168033 and 168207....

Needle Clamp withthree 904F

Needle Clamp Thread Guide Needle Guard (movable)

Needle Set Screw (3)

Presser Foot Compensating Plate

Presser FootCompensating Plate HingeScrew (2)

PresserFootCompensating Plate Spring (2)

Presser Foot Hinge Pin

Presser Foot Presser Foot

Presser FootShank AdjustingScrew

PresserFootShank AdjustingScrew Set Screw

PresserFoot(compensating, hinged)complete, Nos.26276,

54411,168222,168223

Throat Plate for 168220 and 168221

KNIT

GOODS

in.and

1/8

in.•

1/8

Slide

Arm

Arm Hinge Screw

Arm Hinge Screw Friction

LockSpring Lock

Spring Screw

Screw (3)

two

127784

and

Plate Shank

with 460AL

three

and

168258

No.

247-3

inGauges

1094E

and

50429AL

two

each

247-3

Washer

1449F

and

24701