Specifications and Main Features
- Model Name: 246-3
- Type of Operations: Trimming and Overedging
- Target fabric types: Light to medium-weight fabrics
- Density Measure: Single needle system
- Count of Loopers: Two loopers per stitching head
- System of Feeding: Feeding type for gathering only
- Maximum outputs of the unit’s spindle: 5500 stitches/per minute depending on the materials or the operations being processed
- Oil Specification: TYPE A oil sold exclusively by Singer Sewing Machine Company.
- Main Accessories:
- Belts guard
- Chip chute:
- Fittings of assorted types
- Required Performance Measures of the Unit Maintenance: Full unit requires an oiling system to be done on different components.
Frequently Asked Questions
- What is the reported maximum speed for the SINGER 246-3 sewing machine?
- its maximum allowable output excavates up too 5500 stitches over a 1 minute mark on standard conditions of materials and operations used.
- Which oil is advised for use on this particular machine?
- For maintenance measures type A oil sold only by the Singer Sewing Machine Company is ideal.
- Is there a duration limit between oil checks?
- Based on World Health Organization recommendations the oil level on the system should be monitored daily in cases where the sewing machine is operating constantly.
- Will this equipment be effective for heavier fabric materials?
- This piece of equipment will be ideally suited for lighter to medium weight fabric only.
User Manual
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Loading...