Specifications and Main Features
- Type: SINGER 23W
- Type: Drop Feed Machine
- Sizes: 3-5 adjustable needles
- Type: Standard bobbin
- Diameter: Balance wheel has fifty-four inches
- Diameter: 2.5 inches for Pulley
- Type: Heeb cut and general sewing - type of feed dog
- Arm Length: Can be adjusted
- Throat Plate: forty-six needle holes
- Feed Mechanism: Alternating Feed
- Cloth guide: Yes
- Clothe guide, attachment screws and base which is adjustable are also available.
- Service: Parts can be supplied for repair and maintenance.
Frequently Asked Questions
- Which fabric can be used with the SINGER 23W?
This machine is appropriate for a wide selection of fabrics, and especially jeans, shirts, underwear and even for drapery, which have a light to medium weight.
- How to remove and change needles in SINGER 23W.
To remove, insert the screw driver into the needle clamp and loosen. Secondly, take the old needle out and put in the new needle ensuring that the flat side is facing back before tightening the clamp.
- Where to buy the parts of the machine when they break?
From the authorized SINGER dealers which are listed in the SINGER manual and are found conveniently online.
- Can the SINGER 23W work on thick materials? If yes, then how thick can these be?
Yes, the SINGER 23W can sew multiple layers of fabric, provided the thread and needle used are correct for the thickness.
- I cannot sew thick fabrics, why is that?
Sewing thicker fabrics require setting the thread tension correctly, which can be done with the tension control dial which takes care of the upper thread’s tension depending on the sewing material and method.
- Is there a warranty on the SINGER 23W?
SINGER 23W warranty information is usually displayed at the time of purchasing, for exact information reach out to your retailer.
- What maintenance does the machine require?
While using the machine, it is important to clean it regularly, oil the moving parts and also check the tension and alignment to avoid damage to the machine.
User Manual
Loading...