Singer 22W165 to W170, 22W166, 22W167, 22W168, 22W169 Parts List

Download

Page 1

SINGER 22W165 to W170

Page 2

Form 1613w Revised September, 1921

PARTS

MACHINES Nos. 22w165 to 22w170

INDEX

	Page
ESSORIES	. 37
BIN WINDER	. 37
D Docs	. 40
SE LIFTER	. 38
SEAM FELLERS	. 60
THINE NO. 22w165	. 7
" " 22w166	. 18
" " 22w167	. 20
" " 22w168	. 22
" " 22w169	. 24
" " 22w170	. 35
DLE HOLDERS	. 45
VERICAL LIST OF PARTS	. 65
OLETE PARTS	. 61
SSER FEET	. 46
READ UNWINDER	. 39
ROAT PLATES	. 58

1613w--2

THE SINGER MANUFACTURING COMPANY

Page 3

Instructions for Ordering

In ordering from this list, use ONLY the PART number in the FIRST column.

The number stamped on a Sewing Machine Part is the number of the Single Part only, except when the part includes Set Serews, Clamping Serews, Studs and Rollers Spun on, Small Wires riveted, or Parts soldered together, etc., which it is necessary to furnish in combination.

Every combination of parts sent out has its specific number which, although not stamped on Parts (except in above cases) must be used when ordering the combination.

Each number always indicates the SAME PART in whatever list it appears, or for whatever Machine.

The letters after some of the numbers indicate the style of finish only, as follows:

A. Hardened, Polished and Plated.
B. Polished and Plated.
C. Hardened only.
D. Polished only.
E. Soft, not polished.
F. Hardened and Polished.
H. Blued,

These letters MUST BE USED when they appear in the list and AFTER the number, as in the list.

In this series

200001 to 201500 are Serew Numbers, 201501 to 201800 are Nut Numbers, 201801 to 202000 are Roller Numbers, 202001 and upward are numbers of Machine Parts,

The figures in the second column refer only to the plate in which the illustration of the part is shown and are NOT TO BE USED in ordering.

Two or more numbers over a cut indicate that the difference between such parts is not visible in an illustration.

Parts marked with an asterisk (*) are furnished only when repairs are made at the factory.

LIST OF PARTS COMPLETE

FOR

MACHINE No. 22w165

COMPOUND FEED

For Shirts, Corsets, Underwear, etc.


In	gauges	from	31	to	3	inch


No.	Plate	Name
*204800		Arm with 202036
204163	12305	" Сар
200278n	12311	" " Serew
202248	13103	" Washer
204235	11806	" Position Pin (2)
200963 E	12311	" Screw (3)
202005	12308	" " Washer (3)
213113		" Shaft
204801	11144	" " Bushing (back) with
		202260
202260		Arm Shaft Bushing (back) Oil
		Packing (wick)
200341c		Arm Shaft Bushing (back) Set
		Screw
204802	11144	Arm Shaft Bushing (front) with
		202036 and 202260
202260		Arm Shaft Bushing (front) Oil
		Packing (wick)

Page 4

No.	Plate	Name
200502в	11806	Arm Shaft Bushing (front) Oil Packing Thumb Screw
202036	12338	Arm Shaft Bushing (front) Posi- tion Pin
200352c		Arm Shaft Bushing (front) Set Screw
204804		Arm Shaft Connection with four 200054E (2)
200054E	13099	Arm Shaft Connection Screw
204805	13100	Balance Wheel, 51 in, diam (belt
		groove 27 in. diam.), with 200328c and 200335c
200062m	12311	Balance Wheel Adjusting Screw
200328c	12311	" " Position Screw
200335c	12311	" ' Set Screw
*213119		Bed with 202062, 203248, 203249,
		two each 200362c, 201516E, 200840E
		and 202299
202258	12345	Bed Hinge Connection (2)
200570c	12311	""" " Screw (4)
203329	13101	" Slide (back)
203301	12334	" " (front)
203470	13099	Bobbin (2)
*203520		" Case
203648	13099	" " Latch
*202056		"""Pin
203473	13099	" Plunger
203474	13099	""""Spring
203499	13099	" " Lever
203476		""""Eccentric
204243	13099	""""Position Pin
203506	13099	" Fulcrum
200056d	10882	" Screw
203478	13099	" Slide Stud
203214	13099	" " Tension Spring
200984c	13099	" Regulat-
		ing Screw
200594c	13099	Bobbin Case Tension Spring Screw
203216		" " Washer (cloth)
203521	11238	Bobbin Case complete, Nos. 200594c,
		200984c, 202056, 203214, 203216, 203473, 203474, 203520 and 203648
213118		Face Plate with 200366н, 200685 с. 202087, 204185, two each 200368н, 202090, 204281 and three 200397н
200065c	12338	Face Plate Screw (2)
204185	13099	" " Thread Guide
200397н	12309	" Set Screw

No.	Plate	Name
213676	13100	Face Plate complete, Nos. 200309E,
		20057711, 202088, 204280, 213118,
		223311, two each 204059 and
		204272
203303	12334	Feed Bar with 204189
203309		" " 203303 with 200214ы,
		201525E and 204200
200214e	12386	Feed Bar Hinge Screw
20 1 525 e	12386	"""""Nut
214424	12386	" " Spring
204189	12306	""""Hook
211552	12072	Feed Dog. 50 needle hole, for needle
		sizes 14 and 15, in gauges from
		sig to 1 m., in steps of sig m., for
044501	10050	Zilbai
211561	12073	reed Dog, 50 needle note, for needle
		5 11 3 and 13 in for 211560
911606	11999	Food Dog 50 needle hole for needle
211000	11020	sizes 14 and 15 in gauges from
		J _z to 3 in., in steps of J _z in., for
		211609
200106E	12311	Feed Dog Screw (2)
200075c	13099	" " Support Screw
201535e	13099	""""""Nut
203233	12305	" Driving Cam with 200382c and
		200437c
204192		Feed Driving Cam Fork Lever with
		204195 and 204293
204193	12334	Feed Driving Cam Fork Lever Con-
004104	10200	Rection with 200008C and 201525E
204194	12306	postion Clamp with 200031E
200021	19911	Food Driving Cam Fork Lever Con-
2000316	12011	nection Clamp Pinch Screw
200668c	10438	Feed Driving Cam Fork Lever Con-
2000000	10100	nection Clamp Screw Stud
201525 E	12386	Feed Driving Cam Fork Lever Con-
		nection Clamp Screw Stud Nut
200002e	12338	Feed Driving Cam Fork Lever Con-
		nection Hinge Screw
201522e	12338	Feed Driving Cam Fork Lever Con-
		nection Hinge Screw Nut
*204195		Feed Driving Cam Fork Lever Shaft
204197	12306	ee ee
		Collar with 200113F
200113F	12308	Feed Driving Cam Fork Lever Shaft
001000	10000	Collar Set Screw
204293	12308	Preed Eriving Cam Fork Lever Shart
		rosmon rm

Page 5

No.	Plate	Name
204196	13099	Feed Driving Cam Fork Lever Shaft
		Sleeve (split)
200043c	12311	Feed Driving Cam Fork Lever Shaft Sleeve, Set Screw
201524E	12338	Feed Driving Cam Fork Lover Shuft
		Sleeve Set Scrow Nut
204198	12334	Feed Driving Cam Fork Lever com-
		plete, Nos. 204192 and 204194
200437e	12311	Feed Driving Cam Position Screw
200382c	11137	" " Set Screw
204821	13100	" " Rock Shaft
213931		" 204821 with
0		200002E, 201522E and 204193
202305	13099	Feed Driving Rock Shaft Center (2)
200043c	12311	" Set
204200	12305	Feed Driving Rock Shaft Crank
		with 204189 (on left side) and
		two 200383c
200383c	12311	Feed Driving Rock Shaft Crank
		Set Screw
213007	13099	Feed Lifting Cam with 202126
204202	12308	" " Fork with 200027E
200027E	12338	" Pinch Screw
202126	12308	" " Position Pin
200045E	12338	""" " Serew
203305	12334	" " Rock Shaft
203315	12334	" 203305 with
		203238
202305	13099	Feed Lifting Rock Shaft Center (2)
200043c	12311	" Set
000074	10000	Screw (2)
202276	12308	Feed Lifting Rock Shaft Slide Block
203258	12308
9009422	19990	202276 with 200243E and 201531E
20024015	12338	Feed Litting Rock Shaft Slide Block
001591.	109/00	Thinge Screw
201951E	12308	Feed Litting Rock Shaft Slide Block
		Hunge Screw Nut
204206	12306	Feed Regulating Handle
204288	13101	" " 204206 with
		200098F, 202622, 204208, 204209,
		204213, 204289 and 204925
204208	10438	Feed Regulating Handle Adjustable
		Stop
200098F	10438	Feed Regulating Handle Adjustable
		Stop Screw
204925	12306	Feed Regulating Handle Adjustable
		Stop Screw Washer

	No.	Plate	Name
t.	204209	10438	Feed Regulating Handle Position
	204289	11806	Feed Regulating Handle Shaft
	204211	12306	48 64
•			Crank with 200098F
	204212	10438	Feed Regulating Handle Shaft
-			Crank Link
	200271 e	12311	Feed Regulating Handle Shaft
· V			Crank Link Hinge Screw (lower)
	200291E	10438	Feed Regulating Handle Shaft
			Crank Link Hinge Screw (upper)
1	200098F	10438	Feed Regulating Handle Shaft
			Crank Set Screw
	204213	10438	Feed Regulating Handle Shalt
L	000000	10011	Sleeve (spill)
	200362C	12311	Freed Regulating Handle Shart
	909699	19206	Road Rogalating Handle Shaft
1	202022	12300	Sleeve Washer
	202036	12338	Feed Regulating Handle Stop Pin
	204298		Feed Regulating Handle complete,
			Nos. 200291E, 204211, 204212 and 204288
•	*203522		Hook (sewing)
	203523	11238	" 203522 with 203525 and two
			201253F
	203524	11238	Hook and Bobbin Case complete, Nos. 203521 and 203523
	213810	13099	Hook Beyel Gear Socket, 24 teeth
	2005551	11007	" Screw
	203242	11007	" " Pinion, 24 teeth, with
			two 200383c (2)
	200383c	12311	Hook Bevel Pinion Set Screw
	203306	13101	" Counter Shaft
	203244	11007	" " Collar with two
			200393c
	200393c	11007	Hook Counter Shaft Collar Set Serew
	203245	11007	Hook Counter Shaft Driving Gear, 44 teeth, with 2003620 and 2004390
	213157	13101	Hook Counter Shaft Driving Gear 203245 with 200045E and 213007
	200439c	12311	Hook Counter Shaft Driving Gear Position Screw
	200362c	12311	Hook Counter Shaft Driving Gear Set Screw
	203246	11007	Hook Counter Shaft Gear, 22 teeth.

Page 6

No.	Plate	Name
200383c	12311	Hook Counter Shaft Gear Set Screw
202299		" Oil Packing
		(wick)
200840 _E	11007	Hook Counter Shaft Oil Packing
		(wick) Stop Screw
213116	13100	Hook Driving Shaft
203248	12334	" Bearing with
		202299
202299		Hook Driving Shaft Bearing Oil
		Packing (wick)
202126	12308	Hook Driving Shaft Bearing Posi-
		tion Pin
200516E	12311	Hook Driving Shaft Bearing Screw
203249	11007	" Bushing (eccen-
000000		trie)
202299		Hook Driving Shaft Bushing Oil
		Packing (wick)
200362c	12311	Hook Driving Shaft Bushing Set
		Screw
213141	13099	Hook Driving Shaft Collar with two
900202~	11007	2003930
2005930	11007	Hook Driving Shaft Collar Set
		Screw
203525	11238	Hook Gib
201253F	13099	""" Screw
203508	11239	" Saddle (left or right) with
		2000565
200006E	11007	Hook Saddle Screw (4)
202622	12306	" Washer (4)
213037	11000	" Washer
203027	11238	" 213037 with 203476 and
202520	11920
200020	11209	Ploto Ner 200555 Doors
		202400 202500 202501, 203478,
		203433, 203500, 203508, 203524, 202527 and 212210
909590
203029		Hook Saddle Combination (left and
909445	19100	Fight) complete, Nos. two 203528
202110	1.9100	20244c
997313		Knog Liften Consection T
241010		202445 with 200284 a Doorde
		202445 with 200224h, 200262h,
900994	19900
200224H	12300	Lines Litter Connection Lever
997300	12100	Ringe Screw
441000	19100	ing Bod with 202209
202302	12306	Knee Lifter Connection Lover Lift
		ing Bod Cotter Pin

Parts for Machine No. 22w165

No.	Plate	Name
202446	12306	Knee Lifter Connection Lever Pin
227303	13100	" " Lifting Lever
20026211	12306	" Hinge Screw
231399	11807	Needle Bar (bollow)
213283	11137	" " Connecting Link
200237c	11137	""""""Hinge
		Screw Stud
200380c	12319	Needle Bar Connecting Link Hinge Screw Stud Set Screw
204249	12308	Needle Bar Connecting Stud with 200072c and 202277
202277	• •	Needle Bar Connecting Stud Oil Packing (wick)
200072c	12308	Needle Bar Connecting Stud Pinch Screw
204829	11807	Needle Bar Frame
204830	13102	" Driving Crank
		with two 200382c
203154		Needle Bar Frame Driving Crank 204830 with 200932c, 201525£ and 203155
204832	13101	Needle Bar Frame Driving Crank Connection (9 ¹ / ₂ in. long)
215652		Needle Bar Frame Driving Crank Connection 204832 with two 201528c
203155	11806	Needle Bar Frame Driving Crank Connection Bearing (lower)
200932c	11806	Needle Bar Frame Driving Crank Connection Bearing (lower) Hinge Screw
201525E	12386	Needle Bar Frame Driving Crank Connection Bearing (lower) Hinge Screw Nut
203155	11806	Needle Bar Frame Driving Crank Connection Bearing (upper)
200932c	11806	Needle Bar Frame Driving Crank Connection Bearing (upper)
		Hinge Screw
201525 E	12386	Needle Bar Frame Driving Crank Connection Bearing (upper)
		Hinge Screw Nut
201528c	13102	Needle Bar Frame Driving Crank Connection Bearing Check Nut
203114	11806	Needle Bar Frame Driving Crank Connection Boll Crank with
		200227a and 200447a

Page 7

Plate Name 203156 11137 Needle Bar Frame Driving Crank Connection Bell Crank 203114 with two each 200932c, 201525E 200447c 11806 Needle Bar Frame Driving Crank 2003870 13102 Needle Bar Frame Driving Crank Connection Bell Crank Set Screw 202899 11137 Needle Bar Frame Driving Crank 200382c 11137 Needle Bar Frame Driving Crank 204838 13101 Needle Bar Frame Pitman (7¹/₂ in. 204642 ---- Needle Bar Frame Pitman 204838 with two 201528c Needle Bar Frame Pitman Ball 200086c ... 204641 11137 Needle Bar Frame Pitman Ball *204840 ----- Needle Bar Frame Pitman Ball Bearing Cap ..... 200086c 12308 Needle Bar Frame Pitman Ball 200737c 11806 Needle Bar Frame Pitman Ball Screw ..... 200878 ---- Needle Bar Frame Pitman Ball Screw 200737c with 201524E .... 201524E 12338 Needle Bar Frame Pitman Ball Screw Nut 203155 11806 Needle Bar Frame Pitman Bearing (right hand) 201528c 13102 Needle Bar Frame Pitman Bearing Check Nut (left or right) ..... 200932c 11806 Needle Bar Frame Pitman Bearing Hinge Screw ..... 201525E 12386 Needle Bar Frame Pitman Bearing Hinge Screw Nut ..... 204843 11137 Needle Bar Frame Position Stud 200383c 12311 Needle Bar Frame Position Stud 204844 11806 Needle Bar Frame Position Stud

(upper) .....

(upper) Set Screw .....

200383c 12311 Needle Bar Frame Position Stud

Parts for Machine No. 22w165

140.	Plate	Name
231383	13102	Needle Holder, in gauges from 3
		to ½ in., in steps of ½ in., with
		201030F and two 200141F
231385	13102	Needle Holder, in gauges from 34
		to ^a / ₄ in., in steps of ¹ / ₂₀ in., with
		201030F and two 200141F
201030 _F	13102	Needle Holder Screw
200141F	13102	" Set Screw
204251	12334	Presser Bar (hollow) with 200074F
203779	13102	" " Bushing
200399c	11806	" " Set Screw
204252	12308	" " Lifter
200550c	12311	" Hinge Screw
208609		" " Lifting Bracket
204846	13102
		with 200387c
204254	13102	Presser Bar Lifting Bracket Posi-
		tion Guide
200362c	12311	Presser Bar Lifting Bracket Posi-
		tion Guide Set Screw
200387c	13102	Presser Bar Lifting Bracket Set
		Screw
204255		Presser Bar Spring
200494в	13102	" " Thumb Screw (pres-
		sure regulating)
230795	13102	Presser Foot Hinge Pin
229237		" " Plate, for 229238
229259		" 229260
229395		" 229396
231455		""""231456
231457		" 231458
200074F	12308	" " Screw
223309		" " Shank
229238	11840	Presser Foot (hinged) complete, 50
		needle hole, in gauges 造, 素, 造
		and 🖧 in., Nos. 223309, 229237
		and 230795
229260	11840	Presser Foot (hinged) complete, 50
		needle hole, in gauges 32, 1, 33
		and 5 in., Nos. 223309, 229259
		and 230795
229396	11840	Presser Foot (hinged) complete, 50
		needle hole, in gauges 13, 2, 13
		and ₁ ⁷ _d in., Nos. 223309, 229395
		and 230795
231456	13103	Presser Foot (hinged) complete, 50
		needle hole, in gauges from 15 to
		5 in., in steps of de in., Nos.
		000000 000705 1 021455

Page 8

No.	Plate	Name
231458	11840	Presser Foot (hinged) complete 50
		needle hole, in gauges 21 11 23
		and 3 in., Nos. 223309 230795 and
		231457
213115	13101	Take-up Cam with 200335c 200382c
		and 200430c
203172	13102	Take-up Cam Friction Washer
200430c	12311	" " Position Scrow
200383c	12311	" Choole
		Screw
200335c	12311	Take up Cam Set Scrow
213675	11144	Take-up Cam complete Nor
		200237C. 200380C 213115 and
		213283
203311	13102	Take-up Lever
221454	-	" " 203311 with 204962
204263	12386	" " Bearing with 204264
204264	12306	" Position Pin
200042 _F	12311	" Screw
201816	13102	" " Roller
203312	·	Take-up Lever complete. Nos
		200042F, 201816 and 221454
202402	12309	Tension Disc
202090	12309	" " Position Pin
223311	12338	" Release Lever
200685e	12338	" " Position Screw
200309E	12309	" " Screw
202075	12309	" " Plunger
204848	11806	" " Slide with 203695
203695	11806	""" " Spring
202407	10881	" Spring
200632в	12309	"Stud
200397н	12309	" " Set Screw
201572в	10881	" Thumb Nut
204271	12309	" Washer
204272	12309	Tension complete, Nos. 200632B,
		201572в, 202075, 202407, 204271
004074		and two 202402
204274	12309	Thread Controller Plate
2005771	12311	" " Screw
202098	12309	" "Roller
204275	12309	" " Guard
202084	12309	" Washer
200300C	12309	" " Screw
204276	12309	" Spring
204333 900591	12309	" " Guard
200981H	12309	" " Screw
202087	13102	" " Stop
202029	19107	" " Stud with
		404740

No.	Plate	Name
200366 n	12309	fhread Controller Spring Stud Set
		Screw
204925	12306	Thread Controller Spring Stud
		Washer
205987	12309	Thread Controller complete, Nos.
		200300c, 200581rr, 202084, 202098,
		204274, 204275 and 204333
204280	12309	Thread Controller and Spring com-
		plete, Nos. 204276 and 205987
204556	12386	Thread Guide
203313	12386	" "
204281	12309	" Retainer Guide Wire
202091	12309	" " Sleeve
202092	12309	" " Spring
204058	12309	" " Stud
200368u	12309	" Set Screw
204059	12309	Thread Retainer complete, Nos.
		202091, 202092 and 204058
211551	12072	Throat Plate, for 211552, in gauges
		from 32 to 4 in., in steps of 32
		inch
211560	12073	Throat Plate, for 211561, in gauges
		2, 15, 11, 2 and 13 inch
211609	11828	Throat Plate, for 211606, in gauges
		from 16 to 3 in., in steps of 12
		inch
200161D	12319	Throat Plate Clamp Screw
202062	12308	" " Position Pin
200577 n	12311	" " Screw

Page 9

MACHINE No. 22w166

COMPOUND FEED

For Overalls, Tailoring, Duck Coats, Etc.

In gauges from 1 to 3 inch

The same as Machine No. 22w165 with the following

No.	Plate	Name
211553	12072	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges 등 출, 출, 군, and 4 in., for 211551
211562	12073	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges 32, 55, 33, § and 18 in, for 211560
211607	11828	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges from ā _c to ³ ₁ in., in steps of _a ¹ , in., for 211609.
204258	12386	Presser Bar Spring (heavy), in place of 204255
230795	13102	Presser Foot Hinge Pin
229235		" " Plate for 229236
229257		" 229258
229267		" 229268
229899		" 229900
229269		" 229270
229236	11840	Presser Foot (hinged) complete, 46 needle hole, in gauges ½, ∄, and ∄, in., Nos. 223309, 229235 and 230795
229258	11840	Presser Foot (hinged) complete, 46 needle hole, in gauges 37, 1, 39 and 5a in., Nos. 223309, 229257 and 230795
229268	11840	Presser Foot (hinged) complete, 46 needle hole, in gauges 14, 3, 13 and 7a in., Nos. 223309, 229267 and 230795
229900	11842	Presser Foot (hinged) complete, 40 needle hole, in gauges from 13 to 5 in., in steps of 5'r in., Nos. 223309, 229899 and 230795

No.	Plate	Name
229270	11840	Presser Foot (hinged) complete, 46 needle hole, in gauges 31 , 14 , 33 and 3 in., Nos. 223309, 229269 and 230795
204553	12386	Take-up Lever, in place of 203311
206601		" " 204553 with 204263, in place of 221454
204554	12386	Take-up Lever complete Nos. 200042F, 201816 and 206601, in place of 203312
211551	12072	Throat Plate, for 211553, in gauges from g. to 4 in., in steps of g. inch
211560	12073	Throat Plate, for 211562, in gauges 솘, 훕, 분, $ and 볼 inch
211609	11828	Throat Plate, for 211607, in gauges from 5, to 3 in., in steps of 2 inch

Page 10

MACHINE No. 22w167

COMPOUND FEED

For Felling Corsets, Shirts, Etc.

In gauges from 32 to 3 inch

The same as Machine No. 22w165 with the following exceptions:

No.	Plate	Name
*213098		Bed with 202062, 203248 203249
		two each 200362c, 200516F, 200840F
		and 202299, in place of 213119
211573	12075	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges 3. 1.
		52, 13 and 16 in., for 211575
211555	12072	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges from
		1 to 13 in., in steps of 1/2 in., for
		211576
211606	11828	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges from
		⁷ / ₁₀ to ³ / ₄ in., in steps of ¹ / ₂₀ in., for
000505		211610
230795	13102	Presser Foot Hinge Pin
229420		" " Plate, for 229585
229422		" 229315
222424
22.2200		" 211547
224065		" " 229437
229585	11842	Pressor East (hinged) complete 12
220000	11012	treadle hole in gauges 1 5 and
		³ in Nos 223309 229420 and
		230795
229315	11841	Presser Foot (hinged) complete 53
		needle hole, in gauges 7, 1, 2,
		and 1/3 in., Nos. 223309, 229422
		and 230795
229316	11841	Presser Foot (binged) complete, 53
		needle hole, in gauges 11, 3, 13
		and ₁ 7, in., Nos. 223309, 229424
		and 230795
211547	11842	Presser Foot (hinged) complete, 53
		needle hole, in gauges from 15 to
		I in , in steps of 37 in., Nos.
		223309, 229233 and 230795

Parts for Machine No. 22w167

No.	Plate	Name
229437	11841	Presser Foot (hinged) complete, 53
		needle hole, in gauges 31, 33, 33
		and ³ in., Nos. 223309, 229436
		and 230795
224066	13103	Presser Foot (hinged) complete, 53
		needle hole, in 🛃 in. gauge, Nos.
		223309, 224065 and 230795
211575	12075	Throat Plate, for 211573, in gauges
		32, $, 52, 75 and 32 inch
211576	12075	Throat Plate, for 211555, in gauges
		from 4 to 33 in., in steps of 32
		inch
211610	11827	Throat Plate, for 211606, in gauges
		from 7 to 3 in., in steps of 3
		inch

1613w - 3

Page 11

MACHINE No. 22w168

COMPOUND FEED

For Felling Overalls, Horse Blankets, Canvas, Etc.

In gauges from 1 to 3 inch

The same as Machine No. 22w165 with the following exceptions:

No.	Plate	Name
*213098		Bed with 202062, 203248, 203249,
		two each 200362c, 200516E, 200840E
		and 202299, in place of 213119
211574	12075	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges 1, 5,
		🚠 and 🔬 in., for 211575
211556	12072	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		1 to 13 in., in steps of 1/ in., for
		211576
211607	11828	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		5 to 3 in., in steps of 5 in., for
		211610
204258	12386	Presser Bar Spring (heavy), in
		place of 204255
230795	13102	Presser Foot Hinge Pin
229426		" " Plate, for 229432
229605		""""229428
229606		" 229429
229914		""""229915
229607		" 229430
229432	11844	Presser Foot (hinged) complete, 40
		needle hole, in gauges from 🚠
		to 15 in., in steps of 15 in., Nos.
		223309, 229426 and 230795
229428	11842	Presser Foot (hinged) complete, 40
		needle hole, in gauges 11, 3, 13
		and ₁₅ in., Nos. 223309, 229605
		and 230795
229429	14030	Presser Foot (hinged) complete, 40
		needle hole, in gauges 15, 1, 13
		and 🖧 in., Nos. 223309, 229606
		and 230795
229915	14030	Presser Foot (hinged) complete, 40
		needle hole, in gauges 33 and 5
		in., Nos. 223309, 229914 and 230795

No.	Plate	Name
229430	14030	Presser Foot (hinged) complete, 40 needle hole, in gauges 34, 41, 33 and 7 in., Nos. 223309, 229607 and concrete
		230795
204553	12386	Take-up Lever, in place of 203311
206601	W	" " 204553 with 204263, in place of 221454
204554	12386	Take-up Lever complete, Nos. 200042F, 201816 and 206601, in place of 203312
211575	12075	Throat Plate, for 211574, in gauges 32, 1, 52, 13 and 32 inch
211576	12075	Throat Plate, for 211556, in gauges from ³ / ₄ to ¹ / ₃ in., in steps of ¹ / ₃ inch
211610	11827	Throat Plate, for 211607, in gauges from 1/3 to 3 in., in steps of 3' inch

Page 12

No.	Plate	Name
2001061	: 12311	Feed Dog Screw (2)
2000751	13099	" " Support Screw
2015351	: 13099	" Nut
203233	12305	" Driving Cam with 200382c and
		2004370
204192	••••••	Feed Driving Cam Fork Lover with
		204195 and 204293
204193	12334	Feed Driving Cam Fork Loven Can
		nection with 200668c and 201525.
204194	12306	Feed Driving Cam Fork Lover Con
		nection Clamp with 200021.
2000316	12311	Food Driving Cam Fowly Lower Com
E0000,11	12011	noction Clanin Dirch Com-
2006680	10438	Food Driving Com Pork Lange Com
20.0000	10100	nection Clamp Concert Con-
2015251	19286	Food Driving Complete Land
20102015	12000	Peeu Driving Cam Fork Lever Con-
20000212	19990	Food Driving Com Park f
2000021	12000	notion Hims the
901592 r	19220	Food Driving Com Nucl. 1
2010227,	12000	notion Dings Grow M. J.
*204195		Food Driving Com Part 1
204103	19206	r eed briving cam Fork, Lever Shaft
204127	12900	Galler ML Broute
000440	10000	Collar with 200113F
200113F	12308	Feed Driving Cam Fork Lever Shaft
0.0.4.0.0.0		Collar Set Screw
204293	12308	Feed Driving Cam Fork Lever Shaft
		Position Pin
204196	13099	Feed Driving Cam Fork Lever Shaft
		Sleeve (split)
2000 4 3e	12311	Feed Driving Cam Fork Lever Shaft
		Sleeve Set Screw
201524E	12338	Feed Driving Cam Fork Lever Shaft
		Sleeve Set Screw Nut
204198	12334	Feed Driving Cam Fork Lever com-
		plete, Nos. 204192 and 204194
2004370	12311	Feed Driving Cam Position Screw
200382c	11137	" Set Sercw
204821	13100	" " Rock Shaft
213931		" 904891 with
		200002E, 201522E and 204193
202305	13090	Food Driving Book Shoft Church
2000430	19911	"
2000490	14011	Serow (2)
204200	19905	Food Driving Dock Chaff Ch.
204200	14000	with 204120 (on loft side)
		two 200282g
000000	10011
2003836	12311	Feed Driving Rock Shaft Crank Set
		Serew

No.	Plate	Name
213007	13099	Feed Lifting Cam with 202126
204202	12308	" Fork with 200027E
200027 E	12338	" Pinch Screw
202126	12308	" " Position Pin
200045 E	12338	" Screw
203305	12334	" " Bock Shaft
203315	12334	" 203305 with
,		203238
909205	12099	Food Lifting Rock Shaft Contor (2)
2000430	12311
2	12011	Serow (2)
202276	19208	Feed Lifting Rock Shaft Slide Block
203238	12308	a a
-		202276 with 200243E and 201531E
9009420	10000	Food Lifting Pool, Shaft Slide Plook
2002401.	12000	Hingo Scrow
2015210	19908	Food Lifting Dock Choft Clide Diock
2010010	12000	Ling Corow, Nut
904900	10000	Der 1 Damilation Dar De
204200	12500	Feed Regulating Handle
204288	19101	204206 WITH
		204912 204202, 204208, 204209, 204912 204980 and 204095
0.01010		204215, 204285 and 204525
204208	10438	Freed Regulating Handle Adjustable
000000	10100
200098F	10438	reed Regulating Handle Adjustable
		stop screw
204925	12306	Feed Regulating Handle Adjustable
		Stop Screw Washer
204209	10438	Feed Regulating Handle Position
		Pan
204289	11806	Feed Regulating Handle Shaft
204211	12306	" Crank
		with 200098F
204212	10438	Feed Regulating Handle Shaft
		Crank Link
200271 e	12311	Feed Regulating Handle Shaft
		Crank Link Hinge Screw (lower)
$200291 { m E}$	10438	Feed Regulating Handle Shaft
		Crank Link Hinge Screw (upper)
200098F	10438	Feed Regulating Handle Shaft
		Crank Set Screw
204213	10438	Feed Regulating Handle Shaft
		Sleeve (split)
200362c	12311	Feed Regulating Handle Shaft
		Sleeve Set Screw
202622	12306	Feed Regulating Handle Shaft
		Sleeve Washer
202036	12338	Feed Regulating Handle Stop Pin

Page 13

No. Plate ----- Feed Regulating Handle complete Nos. 200291E, 204211, 204212 and 204288 ..... *203522 ----- Hook (sewing) ..... 203523 11238 " 203522 with 203525 and two 2012233F ...... 203524 11238 Hook and Bobbin Case complete, 213810 13099 Hook Bevel Gear Socket, 24 feeth " Serew ... " " Pinion, 24 teeth, with 200555H 11007 203242 11007 two 200383c (2) 200383c 12311 Hook Bevel Pinion Set Screw .... 213136 11807 " Counter Shaft 203244 11007 " " Collar with two 200393c .... 200393c 11007 Hook Counter Shaft Collar Set Screw ... 203245 11007 Hook Counter Shaft Driving Gear 213157 13101 Hook Counter Shaft Driving Gear 203245 with 200045E and 213007 200439c 12311 Hook Counter Shaft Driving Gear 200362c 12311 Hook Counter Shaft Driving Gear Set Screw . 203246 11007 Hook Counter Shaft Gear, 22 teeth. with two 200383c ... 200383c 12311 Hook Counter Shaft Gear Set Screw ... 202299 — Hook Counter Shaft Oil Packing 200840E 11007 Hook Counter Shaft Oil Packing (wick) Stop Screw ..... (WER) Stop Strew .................................... 203248 12334 " " Bearing with 202299 ..... 202299 ---- Hook Driving Shaft Bearing Oil 202126 12308 Hook Driving Shaft Bearing Position Pin ..... 200516E 12311 Hook Driving Shaft Bearing Screw 213124 13103 " " Bushing (eccentric) 202299 ----- Hook Driving Shaft Bushing Oil 200362c 12311 Hook Driving Shaft Bushing Set Screw ...... 213141 13099 Hook Driving Shaft Collar with two 200393c .....

No.	Plate	Name
200393c	11007	Hook Driving Shaft Collar Set
		Screw
203525	11238	Hook Gib
201253f	13099	" " Screw
213682	11807	" Saddle (left) with 2000560,
		200840E and 202299
213681	11807	Hook Saddle (right) with 200056b
200006E	11007	" " Screw (4)
202622	12306	" Washer (4)
213037		" Washer
203527	11238	" " 213037 with 203476 and
		two 204243
213798	11273	Hook Saddle (left) complete, Nos.
		20055511, 203478, 203499, 203524,
		203527, 213682, 213810 and 223371
213797	11273	Hook Saddle (right) complete, Nos.
		20055511, 203478, 203499, 203524,
		203527, 213681, 213810 and 223371
213799		Hook Saddle Combination (left and
		right) complete, Nos. 213797 and
		213798
202445	13100	Knee Lifter Connection Lever with
		202446
227313		Knee Lifter Connection Lever
		202445 with 200224н, 200262н,
		227303 and 227309
2002241	12306	Knee Lifter Connection Lever
		Hinge Screw
227309	13100	Knee Lifter Connection Lever Lift-
		ing Rod with 202302
202302	12306	Knee Lifter Connection Lever Lift-
5.1211.13		ing Rod Cotter Pin
202446	12306	Knee Lifter Connection Lever Pin
227303	13100	" " Lifting Lever
20026211	12306	"""""Hinge
		Serew
231399	11807	Needle Bar (hollow)
213283	11137	" " Connecting Link
200237c	11137	" Hinge
		Screw Stud
200380c	12319	Needle Bar Connecting Link Hinge
		Screw Stud Set Screw
204249	12308	Needle Bar Connecting Stud with
		200072c and 202277
202277		Needle Bar Connecting Stud Oi
		Packing (wick)
200072c	12308	Needle Bar Connecting Stud Pinch
		Screw

Page 14

30	I	Parts for Machine No. 22w169
No.	Plate	e Name
204829	11807	Needle Bar Frame
204830	1310	2 " " Driving Crank
203154		Needle Bar Frame Driving Crank 204830 with 200932c, 201525r and 202155
204832	13101	Needle Bar Frame Driving Crank Connection (9) in Jour)
215652		Needle Bar Frame Driving Crank 204832 with two 201528c
203155	11806	Needle Bar Frame Driving (rank Connection Bearing (lower)
200932c	11806	Needle Bar Frame Driving Crank Connection Bearing (lower)
201525 _E	12386	Hinge Serew Needle Bar Frame Driving Crank Connection Bearing (lower) Hinge Serew Nut
203155	11806	Needle Bar Frame Driving Crank Connection Bearing(upper)
200932c	11806	Needle Bar Frame Driving Crank Connection Bearing (upper) Hinge Screw
201525e	12386	Needle Bar Frame Driving Crank Connection Bearing (upper) Hinge Screw Nut
201528c	13102	Needle Bar Frame Driving Crank Connection Bearing Check Nut
203114	11806	Needle Bar Frame Driving Crank Connection Bell Crank with 200387c and 200447c
203156	11137	Needle Bar Frame Driving Crank Connection Bell Crank 203114 with two each 200932c, 201525E and 203155
200447c	11806	Needle Bar Frame Driving Crank Connection Bell Crank Position Screw
200387c	13102	Needle Bar Frame Driving Crank Connection Bell Crank Set Screw
202899	11137	Needle Bar Frame Driving Crank Connection Bell Crank Stud'
200382c	11137	Needle Bar Frame Driving Crank Set Screw
204838	13101	Needle Bar Frame Pitman (7½ in. long)
204642		Needle Bar Frame Pitman 204838 with two 201528c

No.	Plate	Name
*204839		Needle Bar Frame Pitman Ball
		Bearing with 204840 and two
		200086c
204641	11137	Needle Bar Frame Pitman Ball
		Bearing 204839 with 200878
*204840		Needle Bar Frame Pitman Ball
		Bearing Cap
200086c	12208	Needle Bar Frame Pitman Ball
		Bearing Cap Screw
200737c	11806	Needle Bar Frame Pitman Bau
		Serew
200878		Needle Bar Frame Pitman Ban
		Screw 200737C with 201524E
2015246	12338	Needle Bar Frame Filman Dau
000155	11000	Screw Nut Pitman Boaring
203155	11800	(vight hand)
901590	19109	Noodle Par Frame Pitman Bearing
2010200	10105	Check Nut (left or right)
2000222	11506	Needle Bar Frame Pitman Bearing
200,0520	11000	Hinge Screw
201525F	12386	Needle Bar Frame Pitman Bearing
20110200		Hinge Screw Nut
204843	11137	Needle Bar Frame Position Stud
201010		(lower)
200383c	12311	Needle Bar Frame Position Stud
		(lower) Set Screw
204844	11137	Needle Bar Frame Position Stud
		(upper)
200383c	12311	Needle Bar Frame Position Stud
		(upper) Set Screw
231386	13103	Needle Holder, in gauges from 🔮
		to 2 in., in steps of 3 ¹ / ₃ in., with
		201030F and 1wo 200141F
201030F	13102	Needle Holder Screw
2001416	13102	Bet Serew
204251	12334	" " Duching
203119	10100	" " Set Screw
2003330	19208	" " Lifter
2042.02	12300	" Hinge Serew
208609	120110	" " Lifting Bracket
204846	13102	" 208609
201010	10105	with 200387c
204254	13102	Presser Bar Lifting Bracket Posi-
		tion Guide
200362c	12311	Presser Bar Lifting Bracket Posi-
		tion Guide Set Screw
200387c	13102	Presser Bar Lifting Bracket Set
		Serew

Page 15

No.	Plate	Name
204258	12386	Presser Bar Spring (heavy)
200494в	13102	" " Thunb Screw (pres-
		sure regulating)
230795	13102	Presser Foot Hinge Pin
229891		" " Plate, for 229892
229905		" 229906
231465		" 231466
231473		" 231474
231479		""""231480
231495		""""231496
200074f	12308	" " Screw
223309		" " Shank
231466	11842	Presser Foot (hinged) complete, 46
		needle hole, in gauges from 33 to
		13 in., in steps of 33 in., Nos.
		223309, 230795 and 231465
231474	14002	Presser Foot (hinged) complete, 46
		needle hole, in gauges 31, 1, 1,1
		and 1 k in., Nos. 223309, 230795
		and 231473
231480	14002	Presser Foot (hinged) complete, 46
		needle hole, in gauges 13, 13,
		132 and 133 in., Nos. 223309,
		230795 and 231479
229892	14002	Presser Foot (hinged) complete, 46
		needle hole, in gauges from 133
		to 1 is in., in steps of is in., Nos.
		223309, 229891 and 230795
229906	14002	Presser Foot (hinged) complete, 46
		needle hole, in gauges from 133
		to 113 in., in steps of 3'3 in., Nos.
		223309, 229905 and 230795
231496	14003	Presser Foot (hinged) complete, 46
		needle hole, in gauges from 133
		to 2 in., in steps of sta in., Nos.
		223309, 230795 and 231495
213115	13101	Take-up Cam with 200335c, 200383c
		and 200430c
203172	13102	Take-up Cam Friction Washer
200430c	12311	" " Position Screw
200383c	12311	" Check
000005		Screw
200335c	12311	Take-up Cam Set Screw
213675	11144	Take-up Cam complete, Nos. 200237c,
		200380c, 213115 and 213283
204553	12386	Take-up Lever
206601		" "204553 with 204263
204263	12386	" "Bearing with 204264
204264	12306	" " Position Pin

No.	Plate	Name
200042r	12311	Take-up Lever Bearing Screw
201816	13102	" " Roller
204554	12386	Take-up Lever complete, Nos.
		200042F, 201816 and 206601
202402	12309	Tension Disc
202090	12309	" " Position Pin
223311	12338	" Release Lever
200685E	12338	" Position
		Screw
200309E	12309	Tension Release Lever Screw
202075	12309	" " Plunger
204848	11806	" " Slide with 203695
203695	11806	" Spring
202407	10881	" Spring
200632B	12309	" Stud
200397 H	12309	" " Set Screw
201572в	10881	" Thumb Nut
204271	12309	" Washer
204272	12309	Tension complete, Nos. 2006328,
		201572c, 202075, 202407, 204271
		and two 202402
204274	12309	Thread Controller Plate
200577н	12311	" " Screw
202098	12309	" " Roller
204275	12309	" Guard
202084	12309	" Washer
200300c	12309	" " Screw
204276	12309	" " Spring
204333	12309	" Guard
200581 н	12309	" Screw
202087	13102	" Stop
202088	13102	" " Stud with
		204925
20036611	12309	Thread Controller Spring Stud Set
		Screw
204925	12306	Thread Controller Spring Stud
		Washer
205987	12309	Thread Controller complete, Nos
200001		200300c, 200581H, 202084, 202098
		204274, 204275 and 204333
204280	12309	Thread Controller and Spring com
204280	12000	nlete. Nos. 204276 and 205987 .
004550	10900	Throad Cuido
204556	12380	" "
203313	19900	" Retainer Guide Wire
204281	19900	" " Sleeve
202091	19900	" " Spring
202092	12309	" " Stud
204038	12000	" " Set Screw
2003681	1 12003	,

Page 16

No.	Plate	Name
204059	12309	Thread Retainer complete, Nos.
211609	11828	202091. 202092 and 204058 Throat Plate, for 211607. in gauges
211569	19074	from 35 to 35 in., in steps of 32 inch
211000	12011	from 1 to 2 in., in steps of ¹ / ₂₂
200161p	12319	Throat Plate Clamp Screw
202062	12308	" " Position Pin
200577н	12311	" " Screw

MACHINE No.	22w17	C

COMPOUND FEED

For Felling Overalls, Horse Blankets, Canvas, Etc.

In gauges from 🔠 to 2 inches.

The same as Machine No. 22w169 with the following exceptions:

No.	Plate	Name
*213683		Bed with 200840E, 202062, 202299, 203248, 213124, two each 200362c and 200516E, in place of 213680
211607	11828	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges from $3 to $3 in., in steps of $3 in., for 211610
211570	12074	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges from 1 to 2 in., in steps of 23 in., for 221416
230795	13102	Presser Foot Hinge Pin
229442		" "Plate, for 229443
229446		" 229447
229916		" 229917
229937		" 229938
221455		" 221456
229443	14030	Presser Foot (hinged) complete, 40 needle hole, in gauges from 32 to 1.1s in., in steps of 32 in., Nos. 223309, 229442 and 230795
229447	11844	Presser Foot (hinged) complete, 40 needle hole, in gauges from 1 ² / ₂ , to 1 ⁴ / ₄ in., in steps of 3 ¹ / ₂ in., Nos. 223309, 229446 and 230795
229917	11843	Presser Foot (hinged) complete, 40 needle hole, in gauges from 1 ^3/2 ₃ to 1 ¹ / ₂ in., in steps of ^3/2 / ₃ in., Nos. 223309, 229916 and 230795
229938	14030	Presser Foot (hinged) complete, 40 needle hole, in gauges from 143 to 13 in., in steps of 32 in., Nos, 223309, 229937 and 230795

Page 17

36 Parts for Machine No. 22w170 No. Plate Name 221456 11843 Presser Foot (hinged) complete, 40 needle hole, in gauges from 1% to 2 in., in steps of ¬½ in., Nos. 221455, 223309 and 230795 211610 11827 Throat Plate, for 211607, in gauges from 3% to 3½ in., in steps of ¬½ inch 221416 11827 Throat Plate, for 211570, in gauges

from 1 to 2 in., in steps of 3/2 inch

37 ACCESSORIES

FOR MACHINES Nos. 22w165 AND 22w167

No.	Plate	Name
200157в	12338	Attachment Screw
203470	13099	Bobbin (10)
*225482		Bobbin Case Screw Driver Blade
*225483		" Handle
225497	12345	Bobbin Case Screw Driver com-
		plete, Nos. 225482 and 225483
128 x 3		Needles, six each, sizes 12 and 14
225181		Drip Pan with four wood screws ½
		in., No. 5
41400	12345	Machine Rest Pin (wood)
36578	12345	Oiler with 36579
36579	12345	" Spout, 3½ in. long, with 120117
120117	·· ·	" " Washer (leather)
*225484		Screw Driver Blade
*225485		" " Handle
225498	12345	Screw Driver complete (71 in. long),
		Nos. 225484 and 225485
225554	12345	Wrench (steel)

BOBBIN WINDER

*225451		Bobbin Holder
225453	10882	Frame with 202277 and 225438
225454	10882	" Hinge Pin
202277		" Oil Packing (wick)
225438	10882	" " Well Cap
225455	10882	" Spring
225456	10882	" " Plunger
202473	10883	Pulley with 200105c
200105c		" Set Screw
*225443		Spindle
225452	10882	" 225443 with 225451
225444	10882	Stop Latch
200056e	10882	" " Screw
225458	10882	" " Thumb Lever
225459	10882	"""""Hinge Stud
225460	10882	" Joint Stud
202478	10882	" " Trip Lever
20029911	10882	" " ' Hinge Screw
225461	10881	Tension Bracket with 2014998
2000821	10882	" " Screw
228026		" " Washer

1613w-4

Page 18

Accessories

No.	Plate	Name
2102	10881	Tension Disc
202407	10881	" Spring
201499B	10881	" Stud
201572в	10881	" " Thumb Nut
225462	10881	Bobbin Winder Tension Bracket
		complete, Nos. 2015728, 202407, 225461 and two 2102
225433	10883	Bobbin Winder and Tension Bracket Base
225436	10883	Universal Bobbin Winder com- plete, Nos. 200056E, 200082p, 20029911, 202473, 202478, 225433, 225444, 225452 to 225456, 225458

KNEE LIFTER

227781	13100	Knee Lifter Rock Lever with
227782		200522c and 200529c Knee Lifter Rock Lever 227781 with two each 202451 and 202452
227787	13100	Knee Lifter Rock Lever 227782 with 202203 and 227784
202453	13100	Knee Lifter Rock Lever Knee Plate with 200526c
202203		Knee Lifter Rock Lever Knee Plate 202453 with 202454
202454	13100	Knee Lifter Rock Lever Knee Plate Arm (long)
200522 c	12319	Knee Lifter Rock Lever Knee Plate Arm Set Screw
200526c	12319	Knee Lifter Rock Lever Knee Plate Set Screw
2024 51	13100	Knee Lifter Rock Lever Lug with two wood screws 3 in., No. 13n.,
202452	12319	Knee Lifter Rock Lever Lug Hinge Pin
227784	13100	Knee Lifter Rock Lever Rod, 3 in. long, with 227785
*227785		Knee Lifter Rock Lever Rod Cap or Oil Guard
200529c	12319	Knee Lifter Rock Lever Rod Set Screw

(Other Knee Lifter parts are listed with parts of machine head).

Accessories

THREAD UNWINDER

No.	Plate	Name
202486		Spool Pin
202487		" Rest
227498		"
202488	10838	" " 202487 with 200363c,
		200383c and two 202486
227499	10838	Spool Rest 227498 with 200363c and
		202486
202489	10838	Spool Rest Rod
200383c	12311	" " Set Screw
200383c	12311	" " Set Screw
202490	10838	" Stand with 200383c
202491		" Washer (steel)
202492		" Weight with 202493
202493		" " Center with 202793 and
		203163
203163	- · · -	Spool Weight Center Bushing
202793		" " Thread Guide
202794	10838	Thread Eyelet Rod
227605	10838	"
227606	10838	" " Clamp with two
		200396c
200396c	13103	Thread Eyelet Rod Clamp Set
		Screw
2003 6 3c	12338	Thread Eyelet Rod Set Screw
227500	10838	Thread Unwinder complete, Nos.
		202488 to 202490, 202794, 227499,
		227605, 227606, three each 202491,
		202492 and wood screws 🖁 in.,
		No. 13

FOR MACHINES Nos. 22w166 AND 22w168 TO 22w170

Same as for Machine No. 22w165 with following exception:

128 x 3 ---- Needles, twelve, size 20, in place of six each sizes 12 and 14 ......

Page 19

FEED DOGS

FOR MACHINE No. 22w165

No.	Plate	Name
211552	12072	Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges from #2 to 4 in., in steps of 42 in., for 211551 and 222200
211553	12072	Feed Dog. 46 needle hole, for needle sizes 16 and 18, in gauges 동, 출, 휴, 示, and 4 in., for 211551 and 222200
211555	12072	Feed Dog. 50 needle hole, for needle sizes 14 and 15, in gauges from 1 to 13 in., in steps of 45 in., for 211554, 211576, 211586 and 212096
211556	12072	Feed Dog, 46 needle hole, for needle sizes 46 and 18, in gauges from 4 to 33 in., in steps of 35 in., for 211554, 211576, 211586 and 212096
211561	12073	Feed Dog. 50 needle hole, for needle sizes 14 and 15, in gauges 30, 53, 41, 3 and 43 in., for 211560
211562	12073	Feed Dog. 46 needle hole, for needle sizes 16 and 18, in gauges 32, 33, 43, 3 and 33 in., for 211560
211573	12075	Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges 32, 3, 42, 34 and 32 in., for 211572, 211575 and 211585
211574	12075	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges 1, 52, 14 and 53 in., for 211572, 211575 and 211585
211583	12076	Feed Dog. 50 needle hole, for needle sizes 14 and 15, in gauges ³ / ₁₆ , ² / ₅₂ , ¹ / ₃ , ³ / ₅₂ and ¹ / ₁₆ in., for 211582
211588	12077	Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges 33, 31 and 15 in., for 211587
211606	11828	Feed Dog. 50 needle hole, for needle sizes 14 and 15, in gauges from is to $ in., in steps of siz in., for 211609, 211610, 212000 and 212092

Feed Dogs

No.	Plate	Name
211607	11828	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		- ⁷ / ₁₆ to ³ / ₄ in., in steps of ³ / ₃ in., for
		211609, 211610, 212000 and 212092
211997	11828	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges from
		⁷ ₁₆ to ³ ₄ in., in steps of ¹ ₃₆ in., for
		212000
211998	11828	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		16 to 3 in., in steps of 12 in., for
		212000
212253	11828	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges 11, 3
		and 13 in., for 212254
221412	12075	Feed Dog, 40 needle hole, for needle
		sizes 20 and 22, in gauges 🚠, 🚠
		and 3/2 in., for 211572, 211575 and
		211585

FOR MACHINE No. 22w166

212253	11828	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges 14, 3
		and 13 in., for 212254
211556	12072	Feed Dog. 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		4 to 13 in., in steps of 15 in., for
		211554, 211576, 211586 and 212096
211562	12073	Feed Dog. 46 needle hole, for needle
		sizes 16 and 18, in gauges 32, 5,
		33, 3 and 33 in., for 211560
211574	12075	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges ½, ½,
		³ ₁₆ and ⁷ ₃₂ in., for 211572
211580	12072	Feed Dog, 40 needle hole, for needle
		sizes 20 and 22, in gauges from
		1 to 13 in., in steps of 3 in., for
		211554, 211586 and 212096
211295	12072	Feed Dog, 40 needle hole, for needle
		sizes 20 and 22, in gauges 3, 32
		and 4 in., for 211551 and 222200
211607	11828	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		⁷ / ₁₃ to ² / ₄ in., in steps of ¹ / ₃₂ in., for
		211609 and 212092
211608	11828	Feed Dog. 40 needle hole, for needle
		sizes 20 and 22, in gauges from
		⁷ ₁₆ to ³ ₄ in., in steps of ¹ ₃₂ in., for
		211609 and 212092

Page 20

Feed Dogs

No.	Plate	Name
211574	12075	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges 1, 32,
		³ / ₁₆ and ⁷ / ₂₂ in., for 211575
211580	12072	Feed Dog. 40 needle hole, for needle
		sizes 20 and 22, in gauges from
		4 to 13 in., in steps of 32 in., for
		211576
211607	11828	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		5 to 3 in., in steps of 32 in., for
		211610
211608	11828	Feed Dog, 40 needle hole, for needle
		sizes 20 and 22, in gauges from
		7 to 4 in., in steps of 3 in., for
		211610 and 221460
221412	12075	Feed Dog, 40 needle hole, for needle
		sizes 20 and 22, in gauges 32, 33
		and ₃₇₂ in., for 211575

FOR MACHINE No. 22w168

211570	12074	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		1 to 2 in., in steps of 33 in., for
		211569
211571	12074	Feed Dog. 40 needle hole, for needle
211011	12011	sizes 20 and 22 in gauges from
		1 to 2 in in store of -1- in for
		911560
011000	10051	Beel bee 50 models halve for poollo
211996	12074	Feed Dog, so needle note, for needle
		sizes 14 and 15, in gauges from
		1 to 2 m., in steps of 33 m., for
		211569
221997	11828	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges from
		33 to 34 in., in steps of 3/2 in., for
		212000
211998	11828	Feed Dog. 46 needle hole, for needle
		sizes 16 and 18 in gauges from
		25 to 31 in in stone of 1 in for
		35 to 32 m., in steps of 32 m., for
	11000
211999	11828	Feed Dog, 40 needle hole, for needle
		sizes 20 and 22, in gauges from
		10 to 11 in., in steps of 32 in., for
		212000
211606	11828	Feed Dog. 50 needle hole, for needle

sizes 14 and 15, in gauges from 35 to 34 in., in steps of 34 in., for 211609, 212000 and 212092 .....

12		Feed Dogs
No.	Plate	Name
211616	12073	Feed Dog, 40 needle hole, for needle sizes 20 and 22, in gauges 52, 1δ, 34, $ and 43 in., for 211560
211998	11828	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges from ⁷ / ₆ to ³ / ₄ in., in steps of ¹ / ₂₂ in., for 212000
211999	11828	Feed Dog, 40 needle hole, for needle sizes 20 and 22, in gauges from ⁷ / ₄ to ³ / ₄ in., in steps of ¹ / ₅₂ in., for 212000
221412	12075	Feed Dog, 40 needle hole, for needle sizes 20 and 22, in gauges d ₂ , d ₄ and d ₅ in., for 211572 and 211585
	F	OR MACHINE No. 22w167
211555	12072	Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges from 4 to 43 in., in steps of 32 in., for 211576
211556	12072	Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges from 4 to 13 in., in steps of 12 in., for 211576
211573	12075	Feed Dog. 50 needle hole, for needle

sizes 14 and 15, in gauges 3, 3, 211574 12075 Feed Dog, 46 needle hole, for needle
and ³/₁₆ in., for 211575 ..... 211606 11828 Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges from
211610 ..... 211607 11828 Feed Dog, 46 needle hole, for needle
sizes 16 and 18, in gauges from T_a to 3 in., in steps of 3 in., for 211610 .....

FOR MACHINE No. 22w168

211556	12072	Feed Dog. 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		1 to 13 in., in steps of 3 ¹ / ₂ in., for
		211576

			sizes 20 and 22, in
			11, 2 and 13 in., for
	011000	11000	East Dag 46 passila b


loaded from	www.Manualslib.com	manuals	search	engine

Page 21

14 Feed Dogs

No.	Plate	Name
211607	11828	Feed Dog, 46 needle hole, for needle
		sizes 16 and 18, in gauges from
		10 13 in., in steps of 2 in., fo
		211609, 212000 and 212092
211608	11828	Feed Dog. 40 needle hole, for needle
		sizes 20 and 22, in gauges from
		35 to 31 in., in steps of 3'z in., fo
		911609 919000 and 919009

FOR MACHINE No. 22w170

211570 12074 Feed Dog. 46 needle hole, for needle sizes 16 and 18, in gauges from 1 to 2 in, in steps of the sizes 16 and 18, in gauges from 221416
211571 12074 Feed Dog, 40 needle hole, for needle sizes 20 and 22, in gauges from 1 to 2 in., in steps of 32 in., for 221416
211996 12074 Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges from 1 to 2 in., in steps of 32 in., for 221416.....
211606 11828 Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges from ₿3 to ₿ in., in steps of ½ in., for 211610
211607 11828 Feed Dog, 46 needle hole, for needle sizes 16 and 18, in gauges from 33 to 33 in., in steps of 33 in., for 211610
211608 11828 Feed Dog. 40 needle hole, for needle sizes 20 and 22, in gauges from β1 to β3 in., in steps of g1 in., for 211610 and 221460....................................

45

NEEDLE HOLDERS

No.	Plate	Name
231383	13102	Needle Holder, in gauges from 32
		to 5 m., in steps of 35 m., with
		chines Nos. 22w165 to 22w168
231385	13102	Needle Holder, in gauges from ¹¹ / ₃₄
		to 3 in., in steps of 3 in., with
		201030F and two 200141F, for Ma-
		chines Nos. 22w165 to 22w168
231386	13103	Needle Holder, in gauges from 39
		to 2 in., in steps of 35 in., with
		201030F and two 200141F, for Ma-
		alinos Nos 99m169 and 99m170

Page 22

PRESSER FEET

FOR MACHINE No. 22w165

No.	Plate	Name
229007	14028	Presser Foot with two 229434 and
		four 20017211, adjustable from 🚦
		to 3 inch
229323	11840	Presser Foot, 46 needle hole, in
		gauges from 13 to 2 in., in steps
		of 32 inch
229411	14003	Presser Foot, 53 needle hole, in
		gauges from 1 to 15 in., in steps
		of 33 inch
229412	14003	Presser Foot, 53 needle hole, in
		gauges from ½ to § in., in steps
		of ₂₅ inch
229414	11840	Presser Foot, 50 needle hole, in
		gauges from 1 to 16 in., in steps
		of _ab inch
229415	14003	Presser Foot, 50 needle hole, in
		gauges from 3 to 3 in., in steps
001410	11040	or _bb men
221418	11840	Presser Foot, 53 needle hole, m
		gauges from 南 to 南 m., m steps
		or _3/2 men
229431	14028	Presser Foot, 53 needle hole, in
		gauges from 1 to 1 in., in steps
000 100	1 1000	of s2 in., with 2001724 and 229541
229433	14028	Presser Foot, 53 needle hole, m
		gauges from g to g in., in steps
990495	14099	Of He m., for strip work
229400	14020	four 200172 r odjustable from 3
		to 7 in for inside staying
990490	11940	Decorer First 52 and by help in
423400	11840	rresser root, 53 needle hole, m
		gauges from a to a m., in steps
229503	14003	Pressor East 50 poollo hole in
220000	11005	gauger from 1 to 1 in in stone
		of 1 inch
231513	13103	Presser Foot 50 needle hole in
-01010	20100	gauges from 2 to 21 in in stone
		of a in. for strip work
931514	13102	Presser Foot 46 poodlo hole in
201014	10100	gauges from 1 to 21 in in stong
		Konges from a to 24 m., in steps

	D ( )
No.	Plate	Name
202090	12309	Presser Foot Hinge Pin	•
230795	13102		•
229434	14028	" " Needle Guide, for	r
		229007 and 229435
20017211	13103	Presser Foot Needle Guide Screw.
229235		" " Plate, for 229236
229237		······································
229257		" 229258
229259		""""229260
229267		""""229268
229269		" 229270	•
229390		""""231510	•
229395		"""229396	•
229397		" 229398	•
229416		" 231509	·
229623		" 231512	·
229895		" 229896	·
229897		""" " 229898 …	·
229901		" 229902 …	·
229968		······································	·
231499	10775 (0187), 1480	231496	·
229239		229240	·
229613		" 229014	·
229827		223020	٠
201907		401400 4 991500	·
201422		" 299445	·
202996		" " Shank	•
229885		a	·
223309			Ċ
202989	13102	" " Spring	÷
229541		" " Guide, in gauge	s
		from 1 to 1 in., in steps of -	1,
		inch
20017211	13103	Presser Foot Spring Guide Screy	w
229236	11840	Presser Foot (hinged) complete, 4	6
		needle hole in gauges 3 & an	а
		-3- in Nog 222209 2299225 an	a
		18 m., 103. 220500, 220200 an	u
		230795	٠
229238	11840	Pesser Foot (hinged) complete, 5	0
		needle hole, in gauges 32, $, 5	i.
		and 3 in., Nos. 223309, 22923	37
		and 230795
229258	11840	Presser Foot (hinged) complete 4	16
220200	11010	noodla bola in gauges 7 1	. U 9
		needie noie, in gauges 32, 4, 3	(J
		and 15 in., Nos. 223309, 22925	7
		and 230795

Presser Feet

Page 23

48		Presser Feet
No.	Plate	Name
229260	11840	Presser Foot (hinged) complete, 50 needle hole, in gauges 3, 1, 3, and 5, in., Nos. 223309, 229259
229268	11840	and 230795 Presser Foot (hinged) complete, 46 needle hole, in gauges 13, 3, 13
229270	11840	and fa m., Nos. 223309, 229267 and 230795 Presser Foot (hinged) complete, 46 needle hole, in gauges #1, [4, #1] and # io. Nov 202200 magaze
229396	11840	Presser Foot (hinged) complete, 50 needle hole, in gauges M. 3, 34 and 75 in., Nos. 223309, 229395
229398	11842	and 230795 Presser Poot (hinged) complete, 53 needle hole, in gauges from 15 to 5 in., in steps of 15 in., Nos,
231509	11841	223309, 229397 and 230795 Pesser Foot (hinged) complete, 50 needle hole, in gauges 3. and 4 in., Nos. 229416, 229885 and
229896	11840	230795 Presser Foot (hinged) complete, 53 needle hole, in gauges 13, 3, 44 and 5, in, Nos. 223309, 229895 and 950707
229898	11842	and 230/95 Presser Foot (hinged) complete, 46 needle hole, in gauges from 13 to § in., in steps of 35 in., Nos. 293200, 298607 cont. 22005
229902	11840	Presser Foot (hinged) complete, 53 needle hole, in gauges 34 , 14, 34 and 3 in., Nos. 223309, 229901 and 920705
229969	11841	Presser Foot (hinged) complete, 50 needle hole, in gauges from 11 to § in., in steps of 12, in., Nos. 223309, 229968 and 230795
231456	13103	Presser Foot (hinged) complete, 50 needle hole, in gauges from 15 to § in., in steps of 32 in., Nos. 222300, 220505 and 201455
229240	11841	22000, 20059 and 231499 Presser Foot (hinged) complete, 46 needle hole, in gauges from ξ to β in., in steps of β in., Nos. 202989, 202996, 229239 and 230795

Presser Feet +9

No.	Plate	Name
229614	11841	Presser Foot (hinged) complete, 50 needle hole, in gauges 32, 4, 32 and 3, in., Nos. 223309, 229613 and 230795
229826	11841	Presser Foot (hinged) complete, 50 needle hole, in gauges 14, 3, 14 and 7a in., Nos. 223309, 229827 and 230795
231458	11840	Presser Foot (hinged) complete, 50 needle hole, in gauges 34, 14, 33 and 4 in., Nos. 223309, 230795 and 231457
231500	11840	Presser Foot (hinged) complete, 53 needle hole, in gauges 33, 3, 35 and 3, in., Nos, 223309, 230795 and 231499
229445	11841	Presser Foot (hinged) complete, 53 needle hole, in gauges 24, 4, 24 and 35 in., Nos. 202090, 223309 and 229444
231510	11842	Presser Foot (hinged) complete, 53 needle hole, in gauges 32, 3, 33 and 3, in., Nos. 223309, 229390 and 230795
231512	11840	Presser Foot (hinged) complete, 53 needle hole, in gauges de. 1, de and de in., Nos. 223309, 229623 and 220795

FOR MACHINE No. 22w166

229235	Presser	Foot	Plate,	for	229236
229257	**	**	"	**	229258
229267	**	"	"	**	229268
229269	"	"	"		229270
229391	"	"	"	* *	231511
229439	"	"	**	**	229413
229449	••	**	**	**	229450
229893	**	"	"	"	229894
229897	**	"	"	"	229898
229899	"	"	"	"	229900
231451	"	"	"	"	231452
231459	"	"	**	"	231460
231461	"	"	"	**	231462
231501	**	"	"	41	231502
231503		"	"	"	231504
231453	"	"	"	"	231454
224065	"	"	**	4	224066

Page 24

50 Presser Feet No. Plate Name 229236 11840 Presser Foot (hinged) complete, 46

		needle hole, in gauges 1, 3, and 3 in., Nos. 223309, 229235 and 230795
229258	11840	Presser Foot (hinged) complete, 46 needle hole, in gauges 3 ⁷ / ₂ , 1, 3 ⁶ / ₂ and 3 ⁷ / ₆ in., Nos. 223309, 229257 and 230795
229268	11840	Presser Foot (hinged) complete, 46 needle hole, in gauges 34 , 8 , 33 and 76 in., Nos. 223309, 229267 and 230795
229270	11840	Presser Foot (hinged) complete, 46 needle hole, in gauges 31 , 13 , 33 and 4 in., Nos 223309, 229269 and 230795
229413	11842	Presser Foot (hinged) complete, 38 needle hole, in gauges from 13 to § in., in steps of 31 in., Nos, 223309, 229439 and 230795
229450	11840	Presser Foot (hinged) complete, 40 needle hole, in gauges 3.3, 3, 3.2 and 5.5 in., Nos. 223309, 229449 and 230795
229894	11840	Presser Foot (hinged) complete, 40 needle hole, in gauges M , 3 , 43 and 5 , in., Nos. 223309, 229893 and 230795
229898	11842	Presser Foot (hinged) complete, 46 needle hole, in gauges from 14 to § in., in steps of 31/2 in., Nos. 222309, 229897 and 230795
229900	11842	Presser Foot (hinged) complete, 40 needle hole, in gauges from 15 to § in., in steps of 13 in., Nos. 223309, 229899 and 230795
231452	11840	Presser Foot (hinged) complete, 38 needle hole, in gauges 32, 4, 32 and 55 in., Nos. 223309, 230795 and 231451
001460	110/0	Drosser Root (hinged) complete 40

231460 11840 Presser Foot (hinged) complete, 40 needle hole, in gauges 31, 14, 33 and 3 in., Nos. 223309, 230795 and 231459 201460 11840 Presser Foot (hinged) complete, 40 needle hole, in gauges 31, 14, 33
231462 11840 Presser Foot (hinged) complete, 38 needle hole, in gauges 33, 13, 33 and 3 in., Nos. 223309, 230795 and 231461

Presser Feet

No.	Plate	Name
231502	11840	Presser Foot (hinged) complete, 40 needle hole, in gauges 1, 5, and 3 in., Nos. 223309, 230795 and 231501
231454	11840	Presser Foot (hinged) complete, 38 needle hole, in gauges 32, 3, 33 and 7, in., Nos. 223309, 230795 and 231453
231504	11840	Presser Foot (hinged) complete, 38 needle hole, in gauges & 쇼 and 급 in., Nos. 223309, 230795 and 231503
231511	11842	Presser Foot (hinged) complete, 38 needle hole, in gauges 1, 5 and 3 in., Nos. 223309, 229391 and 230795
224066	13103	Presser Foot (hinged) complete, 53 needle hole, in A in, gauge, Nos. 223309, 224065 and 230795, for lap seam felling

FOR MACHINE No. 22w167

229233		Presser	Foot	Plate,	for	211547
229311		"	**	"	"	229312
229313		".	" "	**	**	229314
229422		"	"	"	"	229315
229424		"	"	**	"	229316
229418		**	**	"	"	229419
229436		"	"	••	"	229437
229420		**	"	4.4	"	229585
229846		"	"	**	**	229847
229886		"	**		**	229887
223309		"	**	Shank
211547	11842	Presser	Foot	(hinge	(be	complete, 53
		needle to § i 223309	hole n., in ), 229	e, in 4 steps 233 an	zau≨ of d−2:	ses from 15 12 in., Nos. 30795
229312	14028	Presser needb 3 in 23079 in. fre	Foot e hole ., No: 5. H om re;	(hinge e, in g s. 223: inge 1 gular .	aug 809, 'in	complete, 53 es 1, 153 and 229311 and set back 15
229314	11842	Presser needle to १ i 223309	Foot e hol- n., in ), 229	(hinge e, in ; steps 313 an	ed) gaug of d 2:	complete, 50 ges from 33 da in., Nos. 30795

Page 25

52 Presser Feet

No.	Plate	Name
229315	11841	Presser Foot (hinged) complete, 53
		needle hole, in gauges 3. 4, 3.
		and 16 in., Nos. 223309, 229422
		and 230795
229316	11841	Presser Foot (hinged) complete, 53
		needle hole, in gauges 11, 3, 13
		and 🚠 in., Nos. 223309, 229424
		and 230795
229419	14028	Presser Foot (hinged) complete, 53
		needle hole, in gauges 32, 4, 33
		and 5 in., Nos. 223309, 229418
		and 230795. Hinge Pin set back
		🚡 in, from regular, for felling
229437	11841	Presser Foot (hinged) complete, 53
		needle hole, in gauges 31, 14, 33
		and ³ / ₄ in., Nos. 223309, 229436
000505		and 230795
229585	11842	Presser Foot (hinged) complete, 53
		needle hole, in gauges ½, 👌 and
		fa in., Nos. 223309, 229420 and
000047		230795
229847	11842	Presser Foot (hinged) complete, 50
		needle hole in gauges 1, is and
		in m., Nos. 223309, 229846 and
224887	14099	230795
220001	14020	noodle hele in gengen 11 2 12
		and 7 in Nog 992200 paneog
		and 220705 Hingo Div cot back
		J- in from regular for correct
		felling

FOR MACHINE No. 22w168

229605		Presser	Foot	Plate,	for	229428
229606		"	"	"	"	229429
229607		**	"	**	"	229430
229426		**	"	"	"	229432
229912		"	"	"	**	229913
229914		"	"	"	"	229915
223310	***	**	"	Shank
229428	11842	Presser	Foot	(hinge	d) (	complete, 40
229429	14030	needle and 1 and 2 Presser needle and 1 and 2	e hole 5 in., 30795, Foot • hole 5 in., 30795,	e, in g Nos, for ov (hinge , in g Nos, for ov	ang 223 (era d) o ang 223 (era	es 11, 2, 13 3309, 229605 11 felling complete, 40 es 15, 1, 15 309, 229606 11 felling

Presser Feet 53

No.	Plate	Name
229430	14030	Presser Foot (hinged) complete, 40
		needle hole, in gauges 31, 11, 33 and 3 in., Nos. 223309, 229607
		and 230795, for overall felling
229 432	11844	Presser Foot (hinged) complete, 40
		needle hole, in gauges from 32
		to 15 in., in steps of 32 in., Nos.
		223309, 229426 and 230795, for
		overall felling
229913	11842	Presser Foot (hinged) complete, 38
		needle hole, in gauges 11, 3, 13
		and 5 ^° ₁₆ in., Nos. 223310, 229912
		and 230795. Hinge Pin set back
		t in. from regular, for felling
229915	14030	Presser Foot (hinged) complete, 40
		needle hole, in gauges 12 and §
		in., Nos. 223309, 229914 and 230795

FOR MACHINE No. 22w169


	221419	Presser	Foot	Plate,	for	221420
	229309	"	"	"	"	221310
	229399	"	"	"	"	229400
	229401	**	"	"	"	229402
	229403	**	"	"	"	229404
	229405	"	"	"	"	229406
	229407	"	"	"	"	229408
	229409	**	"	**	**	229410
	229891	"	"	**	"	229892
	229903	"	"	"	14	229904
	229905	"	"	**	"	229906
	229907	"	"	"	"	229908
	229910	"	"	"	"	229911
	231269	"	"	"	"	231270
	231463	"	"	"	"	231464
	231465	"	"		"	231466
	231467	"	"	"	"	231468
	231469	"	"	"	"	231470
	231471	"	"	"	"	231472
	231473	"	"	"	"	231474
	231475	"	"	"	"	231476
	231477	"	"	"	"	231478
	231479		"	"	"	231480
	231481	"	"	"	"	231482
	231483	"	"	"	"	231484
	231485	"	"	"	"	231486
٠	231487	**	"	"	"	231488
	231489	"	"	"	"	231490

1613w ---5

Page 26

Name 229892 14002 Presser Foot (hinged) complete, 46 needle hole, in gauges from 1_3/2 to 1_3/2 in., in steps of 3/2 in., Nos.

Presser Feet

No. Plate

		225509, 229891 and 250799
229904	14002	Presser Foot (hinged) complete, 38
		needle hole, in gauges from 14
		to 1.7, in in stops of J in Nos

		223509, 229903 and 230795
229906	14002	Presser Foot (hinged) complete, 46
		needle hole, in gauges from 153
		to 111 in in store of 1 in Nov.
		person person 1 program. Nos.
		223509, 229909 and 230795
229908	14003	Presser Foot (hinged) complete, 40
		needle hole, in gauges from 143
		to 2 in in steps of in Nos
		222200 220007 and 220705
		225305, 225301 and 250155
229911	14002	Presser Foot (hinged) complete, 40
		needle hole, in gauges 33, 1, 135
		and 14 in., Nos. 223309, 229910
		and 230795
091070	11044
231270	11844	Presser Foot (hinged) complete, 50
		needle hole, in gauges from 🟦
		to 13 in., in steps of dy in., Nos.
		202989, 202993, 230795 and 231269
921464	11949	Drosson Foot (hingod) complete 50
201404	11042	Tresset root (imgeu) complete, so
		needle nole, in gauges from all
		to 13 in., in steps of 35 in., Nos.
		223309, 230795 and 231463
231466	11842	Presser Foot (hinged) complete, 46
		needle hole in gauges from 25
		to 15 in in stone of 1 in Nos
		10 16 m., m steps of 32 m., Nos.
		223309, 230795 and 231465
231468	11842	Presser Foot (hinged) complete, 40
		needle hole, in gauges from 35
		to 13 in in steps of 3 in Nos
		999200 920705 and 921467
		225505, 250455 and 251401
231470	11842	Presser Foot (hinged) complete, 38
		needle hole, in gauges from 33
		to 15 in., in steps of 32 in., Nos.
		223309, 230795 and 231469
001470	14009	Ducquer Feet (hinged) complete 50
201472	14004	Tresser Foot (imged) complete, 50
		neenie noie, in gauges 35, 1, 132
		and 1 ^-1 / ₁₆ in., Nos. 223309, 230795
		and 231471
231474	14002	Presser Foot (hinged) complete 46
2	2.00.4	needle hole in gauges 31 1 1
		and 11 in No. 999900 990705
		anu 1 fr III., NOS. 225309, 230795
		and 231473

Ν	о.	Plate		I	Name
231	1491		Presser	Foot 3	Plate,	for	231	492
231	1493		"	**	"	"	231	494
231	1495		**	"	**	4	231	496
231	1497		"	"	**	**	231	498
231	1507		"	"	"	**	231	508
202	2993		**	"	Shank
202	2989	13103	"	" 5	Spring
229	9415	14003	Presser	Foot.	50 1	neer	ile	hole	e, i
			gauge	s from	n 33	to	1 16	in	., i
			steps	of _a la i	inch .
23	1513	13103	Preser	Foot.	50 r	ieed	le	hole	). i
		1.12000	gauge	s fro	m B	to	24	in	. i
			steps	of sh	in., fo	r st	rip	wor	·k .
23	1514	13103	Presser	Foot	46	neer	lle.	hole	a i
20	1011	10100	gauge	s fron	1. 1. io 1. 1. io	23	in	in s	sten
			of	in fo	r strij	wa Nwr	nk
99	1490	11014	· Duoquon	Reat	(hing	un .		nlat
44.	1720	11041	noodle	r bolo	in in i	5117 ( 69.110		fror	ю, ч н 2
			to 13	in in	, in r	of.	1	in	No
			202989	9. 2029	93. 22	1419	∷: }an	d 23	3079
990	2210	11019	Droggon	Root	()			nlot
223	2010	11040	rresser	bola	in a		com og f	pret	e, a . 13
			to 2 i	in in	etone	oug of	1.	in	No
			202989	01.4 01 9 - 2029	02 99 02 99	9300	a) Fan	нц. а. 29	2079
		11049	Decauon	170.01	(1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.1.			n Di	015 0 5
22	9400	11842	Presser	root bolo	(ining)	5017 - 1 60116	com	fuor	е, я
			to 15	in in	, in }	saug Gof	1	in in	n s No
			- 10 16 999900	111., 111 a 9969	step: ao on	1 9'	83 2070	нц., Б	NO:
(10)		14000	22.000	. 2200	699-811 71-15	u 24		.,
22:	9402	14002	Tresser	FOOL	(ninge	101.1	com	ріет	e, a
			neeqn	a note.	, m gi Nou	auge oo	28 () 2200	5, 1 - 99	, 13 2040
			and 9	18 11.	, 1905.	، ب ن		, 22
0.04		11000	and 2	13 1
223	9404	14002	Tresser	FOOL	(ninge	an i	rom	piet	e, a
			needie	e noie	, m (	gau	ges too	1.65	. 1.
			1.53 4	and i 2 ord 9	16 III. 990705	. 1	ios.	، ن ن	a.a.04
		11000	22040.	a and a	230133	•		••••
225	9406	14002	Presser	FOOL	(ninge	(1) (	com	piet	e, ə
			needie	e note	, mg	aug	es i	rom
			0.0 1 1/3 0.02200	111., 11 n 990 4	n step 105 op	8 01 4 91	301 2070	ш., 5	.50
			220003	. 2204	do an	1 2	5015	.,
229	9408	14002	Presser	Foot	(hinge	900.0	com	plet	е, ъ . тт
			needle	e note	, mg	aug	es t	rom	с 1 § м.
			10 1 [à	, 111., 11 n. 9904	a step 107 av	s of a let	ः) २०७१	и., Б	iNO
			226303 D	a, 4494	ior all	u 2.	5079	•••••
22	9410	14003	Presser	Foot	(hinge	ed) -	com	plet	e. 5

Presser Feet

Page 27

Presser Feet

No.	Plate	Name
231508	11841	Presser Foot (hinged) complete, 40
		needle hole, in gauges from 133
		to 1 ⁷ / ₁₅ in., in steps of 3 ¹ / ₂ in., Nos.
		223309, 230795 and 231507

FOR MACHINE No. 22w170

221419		Presser	Foot	Plate	, for	221420
221455		41	"	"	**	221456
229309		"	"	"	"	229310
229442		"	"	"	"	229443
229446		"	**	"	"	229447
229916		"	"	"	"	229917
229937		"	"	"	"	229938
221420	11844	Presser	Foot	(hing	ed)	complete, 46
		needl	e hole	e, in	gaug	ges from 👫
		to 13	in., ir	ı step	s of	32 in., Nos.
		20298	9, 2029	93, 22	21419	) and 230795
221456	11843	Presser	Foot	(hing	ed)	complete, 40
		needl	e hole	e, in g	gaug	es from 133
		to 2	in., in	steps	s of	J ₃₃ in., Nos.
		22145	5, 223	309 ;	and	230795, for
		overa	ll fel	ling
229310	11843	Presser	Foot	(hing	ed)	complete, 50
		needl	e hole	e, in g	gaug	es from 133
		to 2 :	in., in	steps	s of	J ₃₂ in., Nos.
		20298	9, 2029	993, 23	29309	) and 230795
229443	14030	Presser	Foot	(hing	ed)	complete, 40
		needl	e hole	e, in	gau	ges from 35
		to 11	in., i	n ste r	os of	3 ¹ 2 in., Nos.
		22330	9, 229	442	and	230795, fo r
		overa	ll fel	ling
229447	11844	Presser	Foot	(hing	ed)	complete, 40
		needl	e hole	e, in g	gaug	es from 1 ₃₂
		to 11	in., ir	ı step	s of	¹ ₃₂ in., Nos.
		223309	9, 2294	146 ar	1d 2	30795
229917	11843	Presser	Foot	(hing	ed)	complete, 40
		needl	e hole	e, in g	gaug	es from 1 _3'2
		to 11	in., ir	ı step	s of	_a's in., Nos.
		22330	9, 229	916 ai	10/2	30795
229938	14030	Presser	Foot	(ning	ed)	complete, 40
		needl	e nole	9, m \|	gaug	es from 144
		to 13	111., 11	1 step	os of	3'3 III., NOS.
		22330	9, 229	รชาณ	aa 2	30199

56		Presser Feet
No.	Plate	Name
231476	14002	Presser Foot (hinged) complete, 38 needle hole, in gauges 33, 1, 1 ₃ ¹ , and 1 ₄ ¹ , in., Nos. 223309, 230795 and 231475
231478	14002	Presser Foot (hinged) complete, 50 needle hole, in gauges 1 ₃ ⁴ , 1 ⁴ , 1 ₃ ⁴ and 1 ₄ ⁴ , in., Nos. 223309, 230795 and 231477
231480	14002	Presser Foot (hinged) complete, 46 needle hole, in gauges 1 _ab , 1 _b , 1 _b , 1 _b and 1 _ab in., Nos. 223309, 230795 and 231479
231482	14002	Presser Foot (hinged) complete, 40 needle hole, in gauges 1 ₄₃ , 12, 1 ₄₅ and 1 ₄₄ in., Nos. 223309, 230795 and 231481
231484	14002	Presser Foot (hinged) complete, 38 needle hole, in gauges 1(2), 12, 1(2) and 1(3), in., Nos. 223309, 230795 and 231483
231486	14002	Presser Foot (hinged) complete, 50 needle hole, in gauges from 1 ² / ₂₄ to 1 ² / ₁₆ in., in steps of ² / ₂ / ₂ in., Nos. 223309, 230795 and 231485
231488	14002	Presser Foot (hinged) complete, 50 needle hole, in gauges from 115 to 115 in., in steps of 35 in., Nos, 223309, 230795 and 231487
231490	14002	Presser Foot (hinged) complete, 40 needle hole, in gauges from 143 to 143 in., in steps of 43 in., Nos. 223309, 230795 and 231489
231492	14002	Presser Foot (hinged) complete, 38 needle hole, in gauges from 145 to 141 in., in steps of 45 in., Nos. 223309, 230795 and 231491
231494	14003	Presser Foot (hinged) complete, 50 needle hole, in gauges from 132 to 2 in., in steps of 21 in., Nos. 223309, 230795 and 231493
231496	14003	Presser Foot (hinged) complete, 46 needle hole, in gauges from 155 to 2 in., in steps of 42 in., Nos. 223309, 230795 and 231495
231498	14003	Presser Foot (hinged) complete, 38 needle hole, in gauges from 133 to 2 in., in steps of 33 in., Nos. 223309, 230795 and 231497

Page 28

THROAT PLATES

FOR MACHINES Nos. 22w165 AND 22w166

No.	Plate	Name
211551	12072	Throat Plate, for 211295, 211552 and
		211553, in gauges from 👶 to 3
		in, in steps of 4 inch
211554	12072	Throat Plate, for 211555, 211556 and
		211580, in gauges from 1 to 13
		in., in steps of 👌 inch
211560	12073	Throat Plate, for 211561, 211562 and
		211616, in gauges 음, 유, 용, 3 and
		13 inch
211572	12075	Throat Plate, for 211573, 211574 and
		221412, in gauges 3, 1, 5, 3, and
		5 inch
211582	12076	Throat Plate, for 211583, in gauges
		13, 5, 4, 3 and 5 inch
211585	12077	Throat Plate, for 211573, 211574 and
		221412, in gauges 3, 1, 5 and 3
		inch
	Note:	When ordering 211585, furnish
	sam	ple of strip and state gauge required.
211586	12077	Throat Plate (strip), for 211555.
		211556 and 211580, in gauges
		from 4 to 13 in., in steps of 34
		inch
	Note:	When ordering 211586, furnish
	sam	ple of strip and state gauge required.
211587	12077	Throat Plate, for 211588, in gauges
		a, a, and a inch
211609	11828	Throat Plate, for 211606 to 211608,
		in gauges from 7 to 3 in., in
		steps of 3'3 inch
212000	11828	Throat Plate, for 211997 to 211999,
		in gauges from 1/2 to 3 in., in
		steps of _z inch
212092	11827	Throat Plate (strip), for 211606 to
		211608, in gauges from 🚡 to 🖁
		in., in steps of 32 inch
212096	11827	Throat Plate, for 211555, 211556 and
		211580, in gauges from 1 to 13
		in., in steps of 3 ¹ / ₃ inch
	NT - 4	1111 L 010000 010002

Note: When ordering 212092 or 212096, furnish sample of strip and state gauge required.

Throat Plates

No.	Plate	Name
212254	11828	Throat Plate, for 212253, in gauges
		33, 8 and 33 inch
222200	11828	Throat Plate, for 211295, 211552 and
		211553, in gauges from 🖧 to 🛔
		in., in steps of 🗄 inch

FOR MACHINES Nos. 22w167 AND 22w168

211575	12075	Throat Plate, for 211573, 211574 and
		221412, in gauges 3, 4, 5, 5, and
		2. inch
211576	12075	Throat Plate, for 211555, 211556 and
		211580, in gauges from 4 to 🔚
		in,, in steps of ¹ / ₂ , inch
211610	11827	Throat Plate, for 211606 to 211608,
		in gauges from 3 to 3 in., in
		steps of ¹ / ₃₂ inch
221460	11827	Throat Plate, for 211608, in gauges
		from 16 to 31 in., in steps of 55
		inch

FOR MACHINE No. 22w169

211569	12074	Throat Plate, for 211570, 211571 and
		211996, in gauges from 1 to 2 in.,
		in steps of ¹ / ₃₂ inch
211609	11828	Throat Plate, for 211606 to 211608,
		in gauges from 🚠 to 🔠 in., in
		steps of 32 inch
212000	11828	Throat Plate, for 211606 to 211608,
		in gauges from 👸 to 👫 in., in
		steps of de inch
212092	11827	Throat Plate (strip), for 211606 to
		211608, in gauges from A to 31
		in,, in steps of 👃 inch
	Noto	When evdening 212002 furnish cam.
	Note.	When officing 212052, furnesit sam-
	ple c	of strip and state gauge required.

FOR MACHINE No. 22w170

211610	11827	Throat Plate, for 211606 to 211608,
		in gauges from 15 to 35 in., in
		steps of 1 inch
221416	11827	Throat Plate, for 211570, 211571 and
		211996, in gauges from 1 to 2 in.,
		in steps of ¹ / ₃₂ inch
221460	11827	Throat Plate, for 211608, in gauges
		from 1/3 to 31 in., in steps of 3/3
		inch
		inch

Page 29

LAP SEAM FELLERS

Note: In ordering Lap Seam Feller, give letter which refers to material to be used, in addition to the number.

F Silks, fine muslins, etc., where there are no seams.
L Fine shirts, underwear, corsets, etc.
M General shirt and corset cover work, etc.
MII Heavy corset and other medium heavy material.
- H Heavy shirt work, light overalls, etc.

No. Plate Name

No. Flate Name 230048 11851 Lap Seam Feller on Shank (right hand). For general work. For ¹/₂ to 1 in. gauge machines. For F, L, M, MH or H material. Has yielding spring ......

OBSOLETE PARTS

No.	Plate	Name
211294	12072	Feed Dog, 40 needle hole, for needle sizes 20 and 22, in gauges 23, 55,
		13, 3 and 13 in. (obsolete), for
211558	12072	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges 32, 33, 14, 3 and 13 in., for 211557
211559	12072	Feed Dog, 46 needle hole, for needle sizes 16 and 18 in gauges 25, 25,
	10100	11, 2 and 13 in., for 211557
211541	13103	sizes 14 and 15, in gauges from 1/2
		to 1 in., in steps of ₃ ¹ 2 in., for 211584
211564	12073	Feed Dog, 50 needle hole, for needle sizes 14 and 15 in gauges 3, 13,
		13 and 13 in., for 211563
211566	12073	Feed Dog, 50 needle hole, for needle sizes 14 and 15, in gauges from 1/2
		to 1 in., in steps of 3 ¹ 3 in., for 211548, 211565 and 211577
211568	12074	Feed Dog, 50 needle hole, for needle
		sizes 14 and 15, in gauges from 1 to 2 in., in steps of ¹ / ₃₂ in., for
		211567 and 211581
*213604		Feed Driving Cam Fork Lever Slide Block with 200116c
*213605		Feed Driving Cam Fork Lever Slide Block
213606	13103	Feed Driving Cam Fork Lever Slide
903950	11007	Block 213004 with 213005
203230	11001	two 200393c
203403	13101	Needle Bar (hollow)
203701	14501	"Holder, needles 32 in. apart
		and must be set diagonally, in
		200068ц and two 200141F, for Ma-
		chine No. 22w165
203703	14501	Needle Holder, in gauges 33, 1 and
		ба in., with 200068н and two
		200141F, for Machines Nos.
		22W100 10 22W108

Page 30

62 Obsolete Parts

No.	Plate	Name
203704	14501	Needle Holder, in gauges from 3
		to 1 in., in steps of 1 in., with
		20006811 and two 200141F, for Ma-
		chines Nos. 22w165 to 22w168
203705	14501	Needle Holder, in gauges from M
		to 3 in., in steps of 🚠 in., with
		20006811 and two 200141F, for Ma-
000704	4.15.0.4	chines Nos. 22w165 to 22w168
203706	14501	Needle Holder, in gauges from 33
		to 1/2 m., in steps of 1 in., with
		20006811 and two 200141F, for Ma-
203707	14501	Noodlo Holdov in 2 in granm with
200101	13001	200068µ and 200141µ for Ma
		chines Nos 22w169 and 22w170
213117	13102	Tension Release Lever
211577	12075	Throat Plate, for 211566 in gauges
		from 1 to 1 in., in steps of 5 in.
		for Machines Nos. 22w167, 22w168
		and 22w170
211584	12077	Throat Plate, for 211541, in gauges
		from ½ to ¾ in., in steps of 📩 in.,
		for Machine No. 22w165
· 211557	12072	Throat Plate, for 211294, 211558 and
		211559, in gauges from 1 to 13
		m., m steps of d in., for Ma-
211563	12072	Cutters Nos. 22w165 and 22w166
211000	12010	³ ¹³ ⁷ and ¹³ in for Machine
		No 22w165
211565	12073	Throat Plate, for 211566, in ganges
		from 1 to 1 in., in steps of 5 in.
		for Machines Nos. 22w165 and
		22w170
211548	13103	Throat Plate, for 211566, in gauges
		from 1 to 1 in., in steps of 11 in.,
		for Machines Nos. 22w165 and
		22w170
	Note:	When ordering 211548, furnish sam-
9115.67	19074	t strip and state gauge required.
211307	12014	from 1 to 2 in the story of 1 is
		for Machino No. 22m160
211581	12076	Throat Plate for 211568 in gapage
		from 1 to 2 in., in steps of 1 in
		for Machine No. 22w170
202470	12320	Bobbin Winder Base
202471	12320	" " Frame
202472	12319	" Spring
202474	12320	" " Spindle

Obsolete Parts 63

No.	Plate	Name
202477	12319	Bobbin Winder Stop Latch Thumb Lever
202480	12320	Bobbin Winder Spool Holder Base with 200355n and 202484
202481	12320	Bobbin Winder Spool Holder Base Spool Pin
202482	12319	Bobbin Winder Spool Holder Ten- sion Disc (lower or upper)
202483	12319	Bobbin Winder Spool Holder Ten- sion Disc Spring (brass)
202484	12319	Bobbin Winder Spool Holder Ten- sion Disc Thread Guide
202485	12320	Bobbin Winder Spool Holder com- plete, Nos. 200011E, 202480, 202481, 202483, two 202482 and one wood screw 1 in., No. 13
227522	12319	Bobbin Winder Stop Latch
227523	12320	Bobbin Winder complete, Nos. 200056:;200161b;200221b;2015370, 202470 to 202474, 202477, 202478, 227522; three 2002990 and two round head wood screws 1 in., No. 13