Singer 17-41 User Manual

Form

20582

May,

1952

PrintedinU.S.A.

LIST

OF

PARTS

Ai\ACHINE

A

THE

SINGER

MANUFACTURING

TRADE

No.

MARK

17-41

OF

COMPANY

INSTRUCTIONS

FOR

OILING

To ensure easy running

the ports

oiling

which

are

and

when in continuous use,

sold only by Singer

and

prevent unnecessary

wear

of

in movable contact, the machine requires

"TYPE

B" or

"TYPE

D" OIL,

Sewing

Machine Company, should be

applied at least twice each day to all oil holes marked "OIL,"

as

instructedinForm

"TYPED"OILisstainless.

7946.

Copyright, U. S. A., 1952 by

The Singer Manufacturing Company

Accessories

INDEX

Page

11

Bobbin

Foot

Lifter

Knee

Mochine

Numericol

Winder

Lifter

Bose

No.

Ports

17-41

ListofPorts

11

12

7

13

INSTRUCTIONS FOR ORDERING

In ordering from this list, use

the

FIRST

column.

The

number stamped on a

every case the

Every

number

combination

of the single part

ofpartssentoutas

ONLY

Sewing

the part

Machine

only.

such

NUMBER

Part is in

has

its

specific

number, which, although not stamped on the parts, must be

used when ordering the combination.

Each number always indicates the

SAME

PART

in what

ever list it appears, or for whatever machine.

The letters after some of the numbers indicate the style

of finish only, as follows:

A—Hardened, Polished, Nickel

A.A—Buffed

A.B—Hardened, Polished, Buffed

A.C—Brown

A.D—Gray

and

Chromium

Baking Enamel Finish

Baking

Enamel

A.E—Hardened,BrightRumbled

A.F—Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled

and

A.G—Alumilite, Plain

A.H—Alumilite,

A.J—Polished, Nickel A.K—Hardened, Polished, Nickel A.L—Heat

B—Polished, Nickel

Chromium

Dyed

Treated

Plated

for Toughness

Plated

Finish

and

Plated

and

Chromium

and

Nickel Plated

Chromium

Plated

Buffed

and

Buffed

Plated

Chromium

Plated

C—Hardened Only

C.R—Hardened

D—Polished

E—Soft, Not Polished

F—Hardened

F.J—Hardened, Polished

G—Bright

H—-Blued

and

Only

and

Rumbled

Merlized

Polished

and

Nickel Plated

J—Nickel Plated Only

K—Hardened

L—Brass M—Oxidized

Plated

and

Nickel

Plated

N—Japanned, Dull

P—Japanned,

P.P—Wrinkle

R—-Merlized

S—Cadmium

Bright

Finish

Plated

T—Copper Plated

T.A—Hardened,

T.B—Copper

T.J—Copper

T.K—Hardened,

T.L—Copper

T.M—Copper

Polished, Copper and

and

Nickel

Platedand

and

Nickel Brass

Plated Only

Nickel

Plated

Copper and

and

Platedand Oxidized

Nickel

Polished

Plated

Plated and

Buffed

in

INSTRUCTIONS

FOR

ORDERING-Continued

U—Zinc

V—Silver

W—Polished

X—Black

X.C—Hardened

Y—Black

Z—Chromium

Z.A—Hardened, Polished, Nickel

Z.B—Polished, Nickel

Z.C—Hardened Z.D—Polished

Z.G—Bright

ZJ—Nickel

Z.T—Copper

list;

Plated

Oxide,

Nickel Plated Only

Plated

and

Rumbled, Nickel Plated, Bright Rumbled

Chromium

and

and Chromium Plated

These letters

and

AFTER

In

this

series:

1 to

Screw

1501to1800

1801to2000 2001

190000

are

1500,

Numbers

to

50000

are

numbers

and

Nickel

Plated

for Iron

and

Plated

and

Chromium

MUSTBEUSED

the

and

Black

Oxide,

Plated,

Chromium

Plated

numberasin

50001 to

and

51501to51800

and

51801to52000

and

52001

Steel

for IronorSteel

Plated,

Buffed

and

Plated

when they

the

51500

and

to

Buffed

and

Chromium

appear

list.

140001to142000

ore

Nut

Numbers

are

Roller

140000

and

Sewing Machine Parts, 190001 and upward

of

Electrical

Parts.

The figures in the second column refer only to the plates,

illustrating the parts, and

Ports marked with an asterisk (*)

repairs

are

madeatfactory.

are

NOT TOBEUSED

are

furnished only when

Chromium

Plated

and

in the

are

Numbers

142001

in ordering.

to

SINGER

These

Company's Trade Mark

"FOR

are

Needles

in

SINGER

Needles

are

marked

and

should

Machines

their with

"SIMANCO.**"

NeedlesinContainers

NOT

SINGER

A\ACHINES"

made

be

used

Containers

the

marked

needles.

SINGER

These

Needles

in

SINGER

Needles

are

and

marked

Company's Trade Mark

should

Mach

their

with

be

used

Ines

Containers

the

"SIMANCO.**"

i

NeedlesinContainers

"FOR

are

NOT

SINGER

marked

MACHINES"

made

needles.

2

LIST

OF

PARTS

COMPLETE

No.

*16687

4389 4448

4368

65072

3005

4449

4288 51224W 52239

8879

4292

125044

1518J

*16863

65042

65043

2107 65045

65044

3032

FOR FEED

STITCH LENGTH

PENDING

FORMED.

123E

448AL

144D

1458 375C

164J

233J

463AL

GENERAL

ACROSS

Plate

20929 20929 20929 20929

20929

20929 20929

20929

20929 20929 20929

20929

20930

20930 20930 20930 20930

20930

20929

MACHINE

WORK

CYLINDER.

5-1/3

ON

MATERIAL

Arm

with

Arm Dowel Pin (2)

Arm Oil Tube (for intermediate bearing)

Arm

Screw

Arm

Shaft

Arm

Shaft

Arm

Shaft Shaft

Arm

Shaft

Arm

Shaft

Arm

Side

Arm

Side

Arm Spool Pin Arm Spool Pin

Crank

Connecting

Crank

Connecting

Crank Connecting Rod Cop Screw (2)

Crank

Connecting

Crank

Connecting Rod Hinge Screw Nut

Cylinder, 2

Face

Plate

Face

Plate

Face

Plate

Face Plate Thread Eyelet Face Plate Thread Eyelet Face Plate Thread Eyelet Screw Face Plate Thread Eyelet Set Screw Face Plate complete. Nos. 448AL,460AL,463AL,2107,

2

n1,

233J

Feed

Cam

No. 17-41

IN

LEATHER.

ROLLER

TO THE

USED

4448

ond

(3)

4368

with

Bushing (back) Bushing (back) Set Screw Bushing (front)

Screw

Cover

Thumb

and Washer

7/16

65042

Screw

2127, 2269,

with

446AL

REVERSIBLE

PRESSER.

INCH.

SPEED

AND

OPERATION

Name

4449

3032

and

Screw

Thread Eyelet

(cloth)

Rod with

125044

Rod Oil

Pad

Rod Hinge Screw

in. diam

with

2105

4369.

56791,

65128

(felt)

DROP

MAXIMUM

1200,

and

two

65043,

PER-

65045

DE

145E

and

two

PARTS

FOR

MACHINE

No.

17-41

No.

446AL

52165

375C

1518J

65159

65160

65161

225C 16678 16808

375C

1518J

5544

448AL

6808 6809

732D

1584E 3146 6810

190J

732D

2049

207J

5550

16713

330J

6017

65162

6019

156F

193F

6440

6441

1852

51224W

56898

435AL

4264

3045

56773

377C

1518J 2052

155C 290E 290E

7524

7525

651J 196F

6022

16806

65130

65131

1513J 4784 6023

65005

Plate

20929 20932

20932

20932 20936 20931

NOTE:

No.

isspecified on order.

20932

20932 20932 20932 20932 20932

20932

20932 20932

20932

20932 20932 20932 20932

20932 20932

20932

26932

20932 20932 20931 20931 20931

20931

20933

20933 20934 20934

26934

20934

20934 20934 20934 20934 20934

20934

20934 20934

20929

26929

20929 20929

Feed

Com

Feed Connecting Link

Feed

Connecting Link Hinge Screw (2)

Feed

Connecting Link Hinge Screw Nut (2)

Feed

Dog 10

Feed

Dog 13 teeth (21 teeth to the inch) for

65160issent

Feed

Dog"

Feed Dog Screw

Feed

Feed Forked Connection complete, Nos.5544, 16678,

Feed Feed Feed Regulator

Feed Regulator Crank Set Screw (2)

Feed

Feed Regulator Levercomplete, Nos. 190J, 6808 and 6810. Feed Regulator LeverAdjustingThumbScrew Feed Regulator LeverAdjustingThumbScrew Nut

Feed Regulator LeverAdjustingThumbScrew NutWasher..

Feed Feed Feed Feed

Feed Regulator Lever Set Screw Feed Regulator LeverShaft

Feed Regulator LeverSegment Feed Regulator LeverSegment Screw (2)

Feed

Feed Feed Feed Feed Guide Guide Guide Guide

Machine

Needle Bar (for round shank needle)

Needle Bar Connecting

Needle BarConnecting

Needle BarConnecting Stud with 155C

Needle BarConnectingStud Set Screw Needle BarScrew

NeedleBarScrew

Needle Clomp with 196F,651J

Needle ClampThread Guide

Needle ClampThread Guide Screw

Needle Clamp Screw

Oscillating

Oscillating RockShaft Hinge Pin65130 with1513J

Oscillating

Oscillating Shaft

OscillatingShaft 6023 with2049,6056 ond 16870

Carrier

Forked

52165

and

Forked Connection Hinge Screw Forked Connection Hinge Screw Not

Regulator Lever with

Regulator Lever Friction Regulator Lever Friction Regulator Lever Friction Plate Thumb Screw Regulator Lever Pin

Rock

Shaft

Rock

Shaft

Rock

Shaft

Rock

Shaft

Rock

Shaft (roller) Nos. 1852 Bracket Roller Thumb Screw

Driving

outsidediam. of belt groove 2.9 in.)withtwo

Driving

Name

Set

Screw

teeth

(16 teeth to

with this Machine unless

Connection

two

each

375C

Crank

with two 448AL

207J

6017

with 65161

Crank

with 193F

Crank

Position Screw

Crank

Set

Screw

and

Screw Stud

Pulley

(heavy

PulleySet Screw (2)

Link

3045 with 2052

Link

HingeScrew

Link

HingeScrewNut

Bushing

(lower)

Bushing

(upper)

Rock

Shaft with4784

Rock

Shaft 6022 with65131

Rock

Shaft HingePin

Rock

Shaft HingePinNut

Rock

Shaft OilPad

the

and

Plate

6441

rim,

and

inch) for

1518J

Screw

"V"belt

7525

6042 65170

another

groove,

Feed

435AL

Dog

PARTS

FOR

MACHINE

No.

17-41

No.

6056 6024

2049

1813

2058

52016

1520J

5608

7170

16659

2308

2070 65163 65164

2183

1868

1841

2203

15446

1547J

2206

15444

1547J

2205

1549J

2196

2197

1528J

2073

2211

2212

6058

*15458 125017

2076

2078

2080

2082

462AL 460AL

689C

453AL

802X

290E

190J

262J

440F

316F

176J

190J 652D

398E

Plate

20929 OscillatingShaft Crank with 1813 and two

20929 Oscillating Shaft Crank Roller 20929 Oscillating Shaft Crank Set Screw (for 6024) (2)

20934

20934 20934

20934

20934 20934

20933

20933 Presser Bar LifterLeverHinge Screw ...

20933 Presser Bar LifterLeverSpring

20934 Presser Bar Screw Bushing 20934 Presser Bar Spring

20934 Presser Bar Spring Washer

20931 Presser

20931 Presser Foot (wide

NOTE:

20936

20934

20934 Pressure Regulating ThumbScrew

20936

20931 Roller,

20931

20931 RollerArmAdjustingScrew

OscillatingShaft Crank with

Agents only)

Oscillating Shaft Crank Pin

Oscillating Shaft Crank Set Screw (for 6056)

Presser

Bar

Presser

Bar

Presser

Bar

Presser

Bar

Presser

Bar

Presser

Bar

Presser

Bar

Foot

Presser

Feet

Presser

Roller,

2196)

Roller

Foot

7/8

Arm

Nos.

unless another Presser Foot is specified on order.

RollerArmAdjustingScrew440Fwith1547J

Name

460AL

and 1813

462AL

(for

and

Stud

Lifter Lifter

Screw

Lifter

Screw

Bracket Bracket

Lever

toe)

and

Not

with Set

65164

453AL

Screw

are

sent

with

and

this

Machine

1528J (for

Lifter Lifter

Lifter

(narrow

65163

Screw

in. diam., coarse, with 652D

in. diam., fine, with 652D and 1528J (for 2197).

20931 RollerArmAdjustingScrewNut

20931

.20931 Roller Arm Bracket Screw

20931 Roller Arm Bracket Screw

20931 RollerArmLockSpring

20931 RollerArmLockSpring Screw 20931 RollerArm LockSpring Screw Nut 20936 RollerPresser complete,

20931 RollerPresser complete,

NOTE:

20934

20931

20935

20935 20935

20935

20935 20935 20935 20935

Roller

Arm

Bracket

Roller Arm Bracket Screw Center 316F with 1547J (2)

coarse roller, Nos. 176J, 1549J,

15446

and

two

roller, Nos. 176J, 1549J, 1841, 2203,

and

two

and

Presser Screw Screw

Bobbin

Cover

2090

Cover

15444

Screw

Nut

15458

Hinge Pin

with

No.

2197issent

Presserisspecified on order.

Roller Roller Roller

Shuttle

Shuttle Bobbin Retaining Spring

Shuttle Bobbin Retaining Spring Rivet(2)

Shuttle Bodywith398E, 2082, 2084, 2211 and two 2212....

Shuttle

Shuttle Cover

Shuttle

Shuttle Delivery EyeThread Guard Shuttle DeliveryEyeThread

Shuttle Main Spring

Shuttle Main Spring Screw

Center

(2)

Center

Nut (2)

7/8

15444

this

7/8

Machine

in. diam.,

9/64

1868,2203,

9/64

2205,2206,

unless

with 112E, 466AL, 2078, 2080,

Guard

Rivet

in. face,

2205, 2206,

in. face, fine

another

15446

Roller

2086

10

PARTS

FOR

MACHINE

No.

17-41

No.

2084

2086 2090

16892

16870

2049

65165

65166 65167

65168

16688 16689 16242

50250J

65169

50362J

50258J

2102

1560C 4369

2269

16202

2103

2105

56791

2112 2113 2114

2115

2111

65128 65129

3012

3072

56855

1088C

1819

2124

2127

233J

65170

6042

6049

6046

65171

6047

6048

401J

171AL

6053

466AL

112E

725J

175F

600C

448AL

460AL

446AL

889AL

Plate

20935 20935

20935

20935 20935 20929 20929

20935

20935 20935

20935

20935 20935 20935

20935

20930 20930 20930

20930 20930

20930

20930 20930 20930 20930 20930

20930

20930 20930

20929

20930 20930

20930 20931

NOTE:

20936

20931 20936

20936

20931

20937

Shuttle Main Spring Steady Pin

Shuttle Tension Regulating Screw

ShuttleTensionSpring ShuttleTensionSpring Plate

ShuttleTensionSpring Screw Shuttle (high point) Nos. 2073, 2076,6058 and 125017

Shuttle Driver

Shuttle

ShuttleRaceBody Shuttle RaceBody65165 with50362J and 65169 ShuttleRacecomplete, Nos. 16689, 65166, 65168 and two

each

Shuttle Race Ring Shuttle Race RingCover

Shuttle Race Ring Cover 16688 with 16242 and two 725J....

Shuttle Race RingCover Latch

ShuttleRaceRingCoverLatchScrew(2)

Shuttle Race RingCover Screw (2)

ShuttleRaceRingScrew(2)

Shuttle Race Thread Protector

Shuttle Race Thread Protector Screw

Shuttle Race Screw (4)

Tension Disc (2)

Tension Regulating Thumb Nut Tension Releaser. Tension Releaser Hinge Pin TensionScrew Stud TensionScrew Stud 600C with 1560C TensionScrew Stud Set Screw

TensionSpring

TensionThread Guard

and

Driver Pin

175F

and

Feed LiftingCam

50250J

Tensioncomplete, Nos. 2103, 2124,16202 and two 2102... Thread RetainingDiscwith2113

Thread

Retaining

Retaining Retaining

Retaining

Retainer

Holder

Disc

Spring Stud

.StudSet Screw

Guide

Cam

CamSetScrew Lever

Lever

Lever Lever

Spring Spring

Spring

Thread Thread

Thread

2115

Thread

Toke-up

ThreadTake-upCam65128with

Thread

Take-up

Thread

Take-up

Thread

Take-up

Thread

Toke-up

ThreadTake-up

ThreadTake-up ThreadTake-up

Thread

Take-up

Thread

Take-up

ThroatPlatefor 65160

•

Throat

Plate No. 65170 is sent

another ThroatPlateisspecifiedon order.

Throat Plate for 65159

Throat Plate Holder for 65170

ThroatPlateHolderfor6042

Throat Plate Holder6049 with65170

ThroatPlateHolder6046with6042

ThroatPlate

Throat

Plate

ThroatPlateHolder

DripPan

Name

Steady

complete,

with

3072

HingeScrew

HingeScrewSetScrew Roller

Regulator

Extension

Screw

1819

with

and Stud

for6046

Screw

(2)

Nos.

446AL

1088C

Plate

with

this

(2)

2112,2114and

Adjusting

Screw

Machine

unless