SINGER 147-22 User Manual

Form ISl 11

0( Toiih-i{ FJ'Jo
1‘UINTLD IN U. 8. A.

LIST

OF

PARTS

^,

1^5'

MACHINES

Nos. 147-20 to 147-22

THE SINGER MANUFACTURING COMPANY

Coi-VKKarr, IJ. ,S. A., 192-1 and 192.9,

IIV Тик iilNIHCl! Manufactuking Co.

Ai.i, Rights Rkskrveh for ai.i. Countries

INDEX

ArcKs.soHiKs ..
Beet (iiiAiii)

Bkniti St'ANI)

Four biFT-Eii Parts

IIemmku on Shank . . .
Iron Base

Knee Lifti;r Parts .
Bar Seam 1'’ei.eehs .
Maitiine No. 1-17-20

“ “ 117-21

“ “ 1-17-22........................

Niimehicae List of Parts . .

Thread Unwinder No. 225297 .

“ “ “ 225398.

.............................

_____

............

_______

........................

faoe

34

-

. 35

39
35

31)

34
. 31)
.. 38

7

It)

22

41

. 40

.. 39

INSTRUCTIONS FOR ORDERING

In orderinc: from this list, use ONLY the PART number

in the FIRST column.

The number stamped on a Sewing Machine i)art is in every

case the number of the single part only.

Every combination of parts sent o>it as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.

Each number always indicates the S.'^ME P.\RT in whatever
list it appears, or for whatever machine.

The letters after some of the numbers indicate the style of

finish only, as follows;

A. Hardened, Polished and Plated.
B. Polished and Plated.
C. Hardened only.
I). Polished only.
E. Soft, not Polished.
F. Harilened and Polished.

O.

H. Blued.
J. Plated only.
K. Hardened and Plated.
li. Brass or Gilt.
M. Oxidized.
P. Japanned.
R. Parkerized.

T. Cop))er-plated.

These letters MUST BE USED ivhen they appear in the list,

and AFTER the number as in the list.

In this series:

1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.

2001 to 50000 and 52001 and upward are numbers of

Machine Parts.

The figures in the second column refer only to the plates.

Illustrating the parts, and are NOT TO BE USED in ordering.

Parts marked with an asterisk (*) are furnished only when

repairs are made at factory.

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-20

FOR TWO LINE STITCHING IN FABRICS, TWO NEEDLES. TWO

LOOPERS, FOR TWO-THREAD CHAIN STITCH; FOOT
LIFTER. GAUGES FROM TO Jg INCH.

NO. l’L.\l'E N.VME

*51001

---------

.\rm, upper and lower (solid) with 94Si)

and 5-1034

42:it')t) 8901 .\rm Oil Pad (braided cotton) for oiling

;\rm Hock Shaft Front Bearing

5()00l) SitOl .Arm Oil Pad (braided cotton) for oiling

.\rm Rock Shaft Intermediate Bearing

11119 8901 .Arm Oil Tube with 29599, foroilingt)4321

29599 8i)01 “ “ “ Packing (felt)...............................

51002 8902 “ Hock Shaft....................................................

04380 8901 “ " “ Bushing (back)

440c 8901 “ “ “ “ “ Set Screw

04388 8901 “ “ “ “ (intermediate)

423c 8901

.Set Screw.......................................................

52015 8901 .\nn Hock .Shaft Bushing Oil Pad (braided

cotton).............................................................

......................................................

...................

..

ARTS I'Oli МЛГШХК N„, ] I7-L>()

P.Mi'I'S poli M.\C1I1XK No. 1 17-30

.■so.

l'I.A'r

,8901

.7 1001

453c 8901

.7 100.7 890!

50083c

8901
.8911

0 12.75

,8901

2117

,8901

453c

.8901

.7 110.7

,8901

5201.7

8!)0I

l.73('

.74000 8i)o:i
.74081 8901

8901

5204.7

.8901

701 к

,8902

.7 1007
.7 1118!)

01508

,8! 102

8901

42307

.8901

122c

.7011.84 c8901

,8901

5 1008

8901

12,78c

.71009

8902

5 loot)

5S(i;i9

8902

8901

-12307

,8901

1.79 k

49013

,8!I(I4

8901

1 1 111

1.7190 8902
8901

281)1)
8901

,7 1010

28IÌ1)

8904

; NAM I'.

Aim lidi-k Shall ('ollar willi two lo.'ic, . .

“ " “ “ Set Sci'i'w
“ “ “ ('rank (back! wilh two

A()0S3c

...................................................................

Arm Hock Shaft ('rank (back) Scl Scnnv

" " “ “ (froiil) wilh irsic

“ “ “ “ “ Pm..............

“ " “ “ “ Set Scri'w
“ “ “ Flanged Hii.shing (fnml)

Oil Pail (hraiilcd (aillim)

Ami Kind; Shaft Р1апдс|| liushiiiK (front)

Scl Screw...............................................................

Arm Uolary Shaft....................................................

“ “ “ HushiiiR (front)

(braided cotl on )

Arm Kotary Shaft, Hiishins (front I Set

Screw

......................................................................

,\rm liolary Shaft Hushiii(> (intermediate)

5 10(17 wilh 4'd.'i(i7 and (idaOS

,\r-m liotary Shaft Hushing (internicdiale)

(til Pad, lonii (bi'aided cotton)

.\rm liolaiy Shaft liirshini^ (inlerinediale)

Oil Pad, short (braided cot(on)

,\rm liotary Shaft liushmy; (intermediate)

•Set Screw (loiiij;l..............................................

,\rm Holaiy Shaft liiishiiifi; (iiiterniediate)

.Set Screw (short )

,\nn liotary .Shaft Collar with two 03.780.

“ “ “ Plangcd liiishiiiK
“

............................... “ .71000

with 12:i07 and .hStDii)....................................

.\riii liolaiy Shaft l‘'laiif;cd Bushing Oil

Pad, long (braided cotton)

,\rm liolary .Shaft h'lungcd Bushing Oil

Pad, short (I iraidcd col I on) . . ...............

Ann liotary .Shaft I’langcd Bushing .Screw

" ■' “ I' ronl Bearing ()il J’ad

(I iraidcd col ton I

Arm liolar\- .Shaft .Screw

.Side ('over I back)......................................

“ “ ■' Thumb .Screw.. . .

“ “ “ (front)

“ “ 'riiiiinb .Screw. . ,

................................

...................

“ Oil Pad

...............................................

....................

....................

....................

.............................................

“ Set .Screw

.............................................

..................................

.......................................

.................

..............

..............................

..................

Ml. I’I.\'IK NAMF.

()12,70 sold Balance Wheel wilh two biOo..................................

■ IdOo 8001 “ " Bet Screw

.7-1011 8003 Cloth Plate

.............................................................

....................................

101 If.8001 “ “ Screw (left)........................................

.70173F .8001 “ “ “ (right)

...................................

.71012 8902 “ “ Slide (left).....................................

.71013

----

Cloth Plate Slide (left) eoinplele, Nos.

:iH110, .71012 and two 725j

38110 8901 Cloth Plate Slide (left) Spring

72.7.1 8001 “ “ “ “ “ Screw

.7-1011 <8913 “ “ “ (right ) for .7101,7
.7101,7

-----

Cloth Plate Slide (right) eoinplete for

.........................

..............................

..............

................

.7-1010, Nos. 38119, .7101-1 and two 72.7,1
.710,7.7 8021 Cloth Plate Slide (right) for 5-10.70
.710.70

-----

Cloth Plate Slidi' (right i complete for

.........

.7-10.79, Nos. 38119, .710.7.7 and two 72,7,1
.710.77 8921 Cloth Plate Slide (right) for .710.78

..........

,7t(|.7S Cloth Plate Slide (right I eoinplete for

.71000, Nos, 38119, ,710.77 ami two 72,7,i

38119 8901 Cloth Plate Slidi' (right I Spring..........................

72.7.1 8901

....................... “ “ Screw . .

.71(110 Cloth Plate complete, for /s in. to/, in.

gauges, Nos. ,71011, .71013 and .7401.7, .

.710.79 Cloth Plate ciiinplele, for 'i'- O' '-l >"■

gauges, Nos. 51011, .74013 and .7-10.70, .

.71000 Cloth Plate coiiiplete, for in. to s in.

gauges, Nos. .71011, .74013 and .740.78, .

.71101 891)1 Clot h Plat e Thread ( liiard................................

12.3.71) soot “ “ " “ Screw

...................

51017 8902 Crank Connecting Hod with 0575, 51018,

51218, ,74897, .77222 and two each

890f and 10.77k.............................................

50009c 8901 Crank Connecting Hod Ball Screw Stud

1.710k 8904

Nut..................................................................

01208 8901 (’rank Connecting Hod Ball Screw Stud

Washer...........................................................

*57222 Crank Coniieetiiig Hod Cap (lower)

.890k 8901 “ " " “ " Screw

*51018 •' “ “ “ (upper)

1057k 8901 " “ “ “ “ Screw

.71,897 8901 “ “ “ Oil Cup

...................

.71218 8901 “ “ “ “ Pad (braided

codon).............................................................

0575 8901 ((rank Coimeeling Hod Oil Pad Slop Pin

04209 8913 Pace Plate...............................................................

10111 soil “ “ Pin

......................................................

.

.

10

I’AHT.S FOR AIACIilNF No. 117-20

NO.

2S(ii) S901

ilOlO <S',)02

Г)1020

5722.0
.Pltic SilOl

54111 .4902

'ace Plate 'ГЬишЬ Screw

Feed Bar with ,50129c ami two 453c

,Si)02
SWU

“ “ Coiineelioii
“ “ iliiifre. Pin

“ “ “ “ Set .Screw........................

“ Coniiei'ting Rod witli 10,57e, 54112

...........................................

.............................................

and two 890e...................................................

*51112

----------

.S'MIe .S901

10.5710 .S901
5l02;i S911
21500 8904

457c 8901

40080 8920
40081 89;i0

157j 8904

5042i)c 8904

*54024

---------

»2.5729

41.'ic ,8904

7071 ,8901

217i) .8904
01171 8!I01
2l:i:t2 8901

934.) 8904

54025 ,8900

F’eed Connecting Rod Ca|).................................

“ “ “ Screw
“ “ “ ( 'iani|iing Screw.. .
“ “ “ Hinge Pm
“ “ “ “ “Collar

with 4.57c

.......................................................

Feed Connecting Rod Hinge Pin Collar

¡Set .Screw

.....................................................

F'eed Dog, for in- to in. gauge.s

“ “ A i'l-i'>-KiO’KL's

--------

“ “ Screw
“ “ Stop Screw
“ Flceentrie
“ “ Body

..................................................

..........................................

......................................................

....................................

“ “ “ Set Screw........................

“ “ Clamping Wa.sher..........................

“ “ “ “ .Screw',
“ “ Pres.siire Spring
“ “ “ ‘‘ Flap

“ “ “ “ “ Screw

J’eed Fcci'ntric failjn.stable) complete,

...................

......................

.........................

.....................

....................

No.s. 217n, 934.1, 1103c, 7071, 21332
23729, .54021, 01171 and two 443c. . .

1103c 8901

51020 8')05

18911

7234

8900

7235

4,53c 8901

Id'cd Regulating .Screw

“ Rocking Flame with two 4,53c. . . .

“ “ “ Hinge Pin
“ “ “ “ “ Bushing

ii a it a

.....................................

.......................

Set Seri'W.......................................................

■i53c ,8901
38493 ,8922
54100 89.33

.No’i'i:.

Feed Rocking Frame Hinge Pin Set .Screw
Loopin' (liai'k) with 590ii and 38494

'■ “ closed eye......................................

When ordering Nos. 3.849il or 51100, state

gauge of niaclime foi' winch required.

1147c 8922 Looper (liackl ¡Set Screw

..................................

3,8494 8!)22 " “ 'riiread (hiaril tdoiible) .

5901) 8907 “ “ “ “ Screw...

3819.5 8'.t'22 “ (front).............................................

.................

.........

.................

IFUrrS FOR MACHINE No. 147-20

.NO. in,.\TE N.\ME

54107 S9:i3 Looper (front) closed eye

.....................................

No'I'e. When ordering Nos. 38495 or 54107, state

gauge of machine for which required.

1120c 8907 Loo|)er (front) Set Screw........................................

54027 8900 “ Carrier with two 171f...............................

17If 8901) “ “ Adjusting Screw

54028 8900 “ “ Couueetion

.........................

..................................

50007.1 8900 “ “ “ Oil Plug Screw
54029 SilOO “ “ “ Shaft

................

54030 8900 “ “ “ “ Bushing

50008.1 8900 “ “ “ “

Cap Screw'.....................................................

440c 8901 Loo|)er t'arrier Connection Shaft Bushing

Set Screw........................................................

49013 8904 Looper Carrier Coimeetion Shaft Oil Pad

(braided cotton).............................................

540;il 8900 Looper Carrier Driver with 54032 and four

3911)

...............................................................

*51032 - — Looiier Carrier Driver Cap...................................

391i) 8900 “ “ “ “ Screw

..................

54033 8907 “ Driving Shaft and Feed Lifting

Kceentric with 227u and two 04315. . .

54034 8905 Looper Driving Shaft and Feed Lifting

Kceentric Bracket with 701e........................

54080 890t) Looper Driving Shaft and Feed Lifting

Eccentric Bracket Bashing

...........................

701e 8901 Looiier Driving Shaft and Feed Lifting

Kceentric Bracket Bu.shiiig .Set .Screw

948i) 8900 f.ooper Driving .Sliaft and F'eed Lifting

Eccentric Bracket Screw

..............................

04315 8!)07 Looper Driving .Shaft and Feed Lifting

Kceentric Oil Hole Ping................................

227d 8907 Looper Driving .Shaft and F’eed Lifting

Keeentrie Oil Hole .Screw'

...........................

40320 8907 Looper Driving .Shaft and F'eed lafting

Keeentrie Oil Pad (braided cotton) . . ,

tilOi) 8!)07 Loopin' Driving Shaft and ЛчМ I.ifting

Fcci'iitric Screw'

...........................................

54001 8922 Looper Holder W'ith 1120c and 1147c . .

704j .Si)()7 “ “ .Screw

..........................................

01319 8922 Needle Bar (holh)W')................................................

51002 — Needle Bar complete, for A in. to ].'i in.

gauges, No.s. ,54004, 5400.5 and 04319. .

54003

------

Needle Bur complete, for A in. to in,

gauge.s, No.s. .54004, 51000 and 01319. .

11

12

PAirrS I'Oli МЛСИ1Х1': \o, 117-2(1

IkVKTS l-'OR M.ACHINE No. 147-20

Ill

\(). SAMI';

:jS 17)11 si»07 Needle Kill' Hushing i lower)

1í:};íkS!)07 " ■' ■■ “ Set SiTC'W .

(i-i:i20 S1107 “ “ “ I upper )

1 l:i:ii'; S1107 “ " “ “ Screw, .

(i'i:í21 SÍ107 " “ ('oniieelinfi Link........................

7i2i»!)2 S1107 “ “ “ ‘‘ lUnse Stud

17)201: MHI7 " “ " “

lii:i2:S S007 Needle Bar ('oiinect iiif; Stud with 219p

:it)l)i'; St)tl7 Needle liar ('oiiiieet in^ Stud Clamiiing

7)10111 S022 Needle Clamp with two l-lOSe

7)10(17) S1I22 “ " Thnaid (luard, for ¿k in.

.alOllli S022 Needle Clamp 'riii'cad (¡Hard, for/,, in.

.710117 S022 Needle (luard, for in. to ,// in. fiauei'.s.
.alOtiS S!»22 “ “ " in. to // in. gaunes.

.7'IOlii) S022 “ “ “ in. to in. Kaiine.s.

.alOdS S007 “ “ Holder

I7(li) S007 “ “ “ Sei-ew

21 Ok S007 “ ‘‘ Screw

MOSk S022 “ Set Screw

.a 1 lOS (til Tul)C..........................................

.a 1100 " “ liraeket

'10(li)2 SODS “ ■“ I'aekiiif;; (felt )................

.71110 sons Oil 'I'ulie complete, for oiling Crank Con-

ti lii.'iO Silks I’i'esser Bar wit h 2,71102

2.7:iO:i S007 “ ■“ Ball, .ai/.e ki in
tillilil soil “ “ Busliiiifi flower)

11:1:íkS0()7 “ “ “ “ Set Screw...

lis 1,7(1 S007 “ “ “ (upper).......................

llUlir: S007 “ “ “ “ Set Sen-w.. .

.7-10110 SOOS “ “ Cuide Bracket witli -lolic,

(ilOi S007 l’r*sser Bar tdmle Bracket .\djustin});

11171! SOOS I’l'cs.'i'i' Bar Cuide Bracket Cuide

1 I7( SOOS “ “ “ “ “ Set Screw

lOlll! SOOS '■ “ “ “ Boiler a lul

I.71ÍI SOtll Bresser Bar Cuide Bracket Set Sert w. . . .

7)72.77 soil " " Lifter..........................................

772.7S SOI 1 “ “ “ lliiifj,i' I’m

Nut.................................................................

and t wt) dtltli';.............................................

Screw..............................................................

to ki in. Kaunes, for .5 10112.......................

to in. (iaUKe-^i foi- .á'iOlid

.........................

............................

neetinirliod upper Oeaniiir) .No.a. 10002,
.alios and 7)1100

tllOi and lOtil!

Screw

St ud...............................................................

..............................................

.............................................................

............................

..............................

............................

........................

..................................

.............................

...................................

.........................

...........................................

.......................

.................

.......................

.....

.....................

M). I'l.A'l'K .N.AME

-Il7e silos I’liAsser Bar Lifter llitiKC Pin Si't Screw. .
1S72 sous “ “ “ Roller and St ud
12,70e Sill 1 “ “ “ Stop Screw

t)1017 SOU “ “ Lifting Bracket with 4()0c aitd

1S72................................................................

()411(12 SOIS Presser Bar Lifting Lever..............

(1107.7 SOU “ “ “ “ Connecting

St ud................................................................

ItiOc 8010 I’n'sser Bar lafting Lever Connecting Stud

,71101! 8i)0,7 Pn's.ser Bar Lifting Lever Extension

Kiln SOOS “ “ “ “ “ Screw

17()i) 8007 Pres.aer Bar Lifting Lever Extension Screw

802i) SOOS Pres.si'r Bar lafting Lever Hinge Screw. . .
.74010 800,7 “ “ S|)i'ing (flat)
11,81(18 ,8008 “ “ “ Stud

2(127(1 SOU “ Foot Hinge Pin.....................................................

ItlOSti “ “ Plate.................................................

1(10S7 “ “ Shank

ItltlSS SOlili Presser Foot (lunged) complete. Nos.

lOOn SilOS Pressm- Foot Screw.............................................

,771.1 8008 Pre.s.sure Regulating Thumb Screw

1.7110J SOOS “ “ “ “ Lock

tllliliO SOOS Slack 'Phread (.'ontroller......................................

10011,7 SOOS “ “ “ Clamp...................

lilOi) SilOS “ “ “ “ Screw, . .

0111117 ,Si)22 “ “ Regulator........................................

.71012 .8008 “ “ “ Holder with 17.7k

17.7k SilOS Slack Thiead Regitlator Holder Clamping

.74011! SilOS Slack Thread Regulator Holder Shaft

212!)2 .SilOS

lOlOc SOOS .Slack Thread Regulator Holder Shaf(,

.74014 800,8 Slack Thread Regulator Holder Shaft

1271i(' SOOS Slack Thread Regulator Holder Shaft

,701.70(' SilOS Slack Thread Regiihdor Set Senwv

2102 soon 'Pension (under thri'ad) Disc

Set Screw........................................................

(left)................................................................

(right I............................................................

..............................................

2(127(1, 4(108(1 and 40087

Nut..................................................................

and oOloOc

Screw

Collar with 1010(1

Collar Set Screw............................................

Cratik (forked) with 12,71i('

Crank Set Screw............................................

....................................................

..............................................................

...........................

.................

...............

...............

...........................

...................

.................*.....................

........................

..................

...................................

.....

11

ГЛН'1'S FOR xMACIlIXE No. M7-20

P.AirrS FOR M.ICHINE No. 147-20 15

NO. 1Ч..\Т1.;

l.óOOc S'.KIIJ

5011HC S909

124987

----------

42:?;ì7 8909

18915 8909

17547 8909

54070 8981

87(ìd 8909

2102 8909

1500c 8909

82572 8909

54988 8909
54071 8922
54047 8909

54048 8909

024c 8909

54990 8909

81Of 8909

1547J 8909

50183c

52975
18915

17.547
88225

190d

54072

01851

405c

38210

3.SV11
40247

170i)

38175

405i'

51078

51019 8905

Tcii.slim luiiilor Ihrcu(l) Kcf^ulaling

NA-\IF.

'riiuiuli Nut

.....................................................

'I'ensioii (under thn'ad) iSercw Htud

witli 1500c..................................................

Tcu.sioii (under tliread) Spring

“ “ “ “ liusliing
“ “ “ Thread Guide..

“ (upi)er thread) Rraeket..................

“ “ “ “ Screw.
“ “ “ Disc

“ “ “ Regulating

'rhuinh Nut

...............................................

Ten.sion (upper thread) Relea.sing Disc

“ “ “ “ Shaft

Grauk witli 024c

...........................................

Ten.sion (uiiper thread) Releasing Shaft

Crank Rink....................................................

Tension (u|)iier thread) Releasing Shaft

Crank Set Screw

...........................................

Tension (u])per thread) Releasing Shaft

‘Spiiiig............................................................

Tension (upper thread) Releasing Shaft

Stoi) Screw.....................................................

Tension (upper thread) Releasing Shaft

8909

Sto|) Screw Nut

Tension (up])er thread) Screw Stud................

8909
8909
8909
8909
8908
8931
8909
8909
8909
8909

8909
8907

8910

8909
8985

“ “ “ Spring
“ “ “ “ Hushing..

“ “ “ 4'hread Guide... .

Thread (under) Eyelet (back)

“ “ “ “ Screw

“ “ “ (front)

“ “ Nipiier Саш with 405c.. .

“ “ “ “ Set Screw...
“ “ “ Spring (lower) . . .
“ “ “ “ (upper)...
“ “ “ “ “ Stop

“ “ “ “ Screw....

“ “ Take-up with 405c
“ “ “ Set Screw
“ “ “ S t a j) 1 e w i I h

.............................................

8S48R 51074 and two 590ii

'I'hrcad (under) 'I'ake-up Staple Bracket

with ItiOc

......................................................

..................

“ 50148(

......................

.....................

Pin.

....................

..........................

..............

..........

..........

..........................

NO. I'I..\TE N.AMK

905d 8910 Thread (under) Take-up Staple Bracket

Screw

..............................................................

40011 8909 Thread (under) Take-uir Staple Spring

190d 8908

Screw

..............................................................

54074 8985 Thrraul (under) Take-up Staple Thread

( ¡uard (left)

...................................................

590i) 8907 Thread (under) Take-uj) Staple Thread

Guard (left) Screw.........................................

38181 8910 Thread (under) Take-up Staple Thread

Guard (right)

.................................................

590n 8907 Thread (under) Take-up Staple Thread

Guard (right! Screw......................................

38182 8910 Thread (under) Take-up Stripper

.......................

207i) 8910 “ “ “ “ Screw..

04355 8910 “ “ “ Thread Guard

(brass).............................................................

64850 8910 Thread (under) Take-up Thread Guard

Steady Pin

......................................................

400c 8910 Thread (under) Take-up Tliread Guard

04357 8931 Thread (upper) Controller

Steady Pin Set Screw

207i) 8910 “ “ “ Screw

....................................

...................................

.........................

40009 8931 “ “ Eyelet......................................

190i) 8908 “ “ “ Screw
.54094 8922 “ “ Take-up
54095 8922 “ “ “ Plate

............................

..................................

..

54710 8922 “ “ “ “ Spring ....

11491) 8922 “ “ “ “ “ Screw

54090

------

Thread (uiiper) Take-up com)ilete, Nos.

1449i), 54094, 54095 and 54716

...................

219f 8907 Thread (upper) Take-up Set Screw.......................

40089 8930 Throat Plate for 46080
40090 8930 “ “ “ 46081

.

742f 8910 “ “ Screw

..........................................

.....................................

.............................................

1()

LIST OF PARTS COIVIPLETE

FOR

MACHINE No. 147-21

FOR STAYING SHOES. TWO NEEDLES, TWO LOOPERS, FOR

TWO-THREAD CHAIN STITCH; FOOT LIFTER. GAUGES
FROM A TO IN.

,\(J. I'i.ATE NAME

*.51001

------

.\mi, uppiT and lower (tsolid) with 94Si>

and .540;! t

42,'i0() 8901 Ann Oil Fad (braided eotton) for oiling

Arm Hock Sh.'ift I'd-ont Biairing...............

,50000 SilOl .\nn ()il Fad (braided eotton) lor oiling

111 lit 8901 .\rm t til 'I’ube witli29.')99, for oiling 04)121

29.599 StIOl “ “ “ I’aeking (felt)..............................

.51002 8902 “ Rock Shaft
til;l8t) 89t)l “ “ “ Bitshmg (back)

1 lOc ,S9t)l “ “ “ '• “ Set Serew

01)188 8901 “ ■' “ “ (intermediate).

12)ic 8901 “ “ “ “ “ Set

.Screw.............................................................

,5201,5 81K)1 .Arm Rock Shaft Bushing Oil Fad (braided

eotton)

....................................................

Arm Hock Shaft Interinediat;; Bearing

...................................................

......................

............................................................

FAirrS FOR .\1,\('HI\K Xo. 147-21

NO. ei.ATK NAME

.51001 89t)l Arm Rock .Shaft Collar with two 4.53c. . .

loilc 89t)l “ ■■ “ “ Set Serew

,5400.5 8901 “ “ “ Crank (back) with two

50t)8)l<; 8901 ,\rm Roi'k Shaft Crank (back) Set Serew

042.5.5 8911 “ “ “ “ (front) with 45)ic.
2117 ,8901 “ “ “ “ “ Fill

1.5) lc 8901 “ “ “ “ “ Set Serew

5410.5 8901 “ “ “ Flanged Bushing (front)

.52t)l,5 8901

4.5) ic 8901 .Ann Rock Shaft Flanged Bushing (front)

51000 890)! Arm Rotary Shaft.............................................

,54t)81 8901 “ “ “ Bushing (front)

5201.5 .8901 “ “ “ “ “ Oil Fad

7011; 89t)l .Arm Rotary .Shaft Bushing (frotit) .Set

.51007 8902 .Arm Rotary .Shaft Bushing (intermediate)
540,89 -

01508 8902 .Arm Rotary .Shaft Bushing (intermediate)

12)!07 8901 Arm Rotary .Shaft Bushing (intermediate)

422c 8t)01 Arm Rotary Shaft Bushing (intermediate)

50081c 8901 .Arm Rotary Shaft Bushing (intermediate)

54008 8901 .Arm Rotary .Shaft Collar with two 4258c.

42.58c 8901 “ “ “ “ Set .Screw
5400!) 8902 “ “ “ Flanged Bushing
,54090 “ “ “ “ “ 54009

580)!9 8902 .Arm Rotary Shaft Flanged Bushing Oil

42)!li7 89t)l .Arm Rotary Shaft Flanged Bushing Oil

1.5i)t.’ 8901 .Arm Rotary .Shaft Flanged Bushing Screw

4901)! 8901 " “ “ Fl'oiit Bearing Oil I'ad

bi ll) 8904 .Arm Rotary .Shaft Screw......................................

151i)li 8902 “ Side Cover (back)

281)1) 8904 “ “ “ “ Tliiiml) Screw.. . .

54011) .8904 “ “ “ (front)...................................

50083c.............................................................

Oil Fad (braided cotton)

Set Serew........................................................

(braided cotton).............................................

Serew..............................................................

51007 with 423 07 atid 045t)8.......................

Oil Fad, long (braided cotton)......................

Oil Fad, short (braided cotton)

Si't Serew (long)

.Set .Screw (short)

with 42)iti7 and ,58039..................................

Fad, long (braided cotton)

I'ad, short (braided cotton)

(braided cottoti)

............................................

.........................................

............................................

........................................

....................

...........

...............................

..............

....................

................

.............

............................

..........................

17

IS

PAirrS FOR .MAClirNK No. 117-21

PAirrS FOR M.UdlINK No. 147-21

19

NO.

8904

2801)
8913

04259

8904

4.30c

8938

.54199

8904

101 If

50173 F

8901

8902

.54012
54013

— -

38419 8904

8904

725j

54014 8913

—

54015

.54055 8924

—

5405()

8924

54057
54058

38419 8901

725,1 8991

—

54219

—

54200

—

54220

8913

54104

1235n 8904

8902

54017

8901

50n09c

S<)()1

I510e

(il208 8901

'.57222

SHOE8904

1057e

54S97
.54218

—

8904
8901
8904

'511)18

0575 8901

()4209 8913

\.\MiO

.\nn Side Covt'r U'l'ijnt) d’luiinl) Screw. . .
liulaiiee W'lieel with two 430e'

........................

“ " Set Screw....................................

Cloth Plate

“ “ Screw (left)

.........................................................

.......................................

“ “ “ (rifiht)
“ “ Slide (left)

..................................

........................................

Cloth Pliite Slide (left) coin])lete, Nos.

3S4H), 54012 and two 725j

..........................

Cloth Plate Slide (left) Sjiring..........................

“ “ “ “ “ Screw
“ “ “ (right) for 54015

..............

...................

Cloth Plate Slide (right) complete for

54219, Nos. 38419, 54014 and two 725j

Cloth Plate Slide (right) for 5405()

..................

Cloth Plate. Slide (I'ight) coin|)lete for

54200, No.s. 3S419, 54055 and two 725j

Cloth Plate Slide (right) for 54058

...................

Cloth Plate Slide (right) com|)lete for

5422(1, Nos. 38419, 54057 and two 725j

Cloth Plate Slide (right) Spring

.......................

“ “ “ “ “ Screw. . .

Cloth Plate comiihdc, for in. to in.

gauges. Nos. 54013, 54015 and 54199. .

Cloth Plate coinplet(', for in. to i”-

gauges, No.s. 541113, 5405(1 and 541il9. .

Cloth Plate coni|)lete, for in. to in.

gange.s, No.s. 54013, 51058 and 54199. .

Cloth Plate 'I'hread Guaril.

“ “ “ “ Screw

............................

....................

Crank Connecting Rod with (1575, 54018,

54218, 54897, 57222 and two each 890e

and 1O5710

...................................................

Crank Connecting Rod Ball Screw Stud

Nut

.................................................................

Crank Connecting Rod Ball Screw Stud

Waslu“!'

Crank Connecting Rod (.lap (lower)

........................................................

...........

“ “ “ “ “ .Screw
“ “ “ “ (u])i)(u-)

........

“ “ “ “ “ Screw
“ “ “ Oil Cu]i

......................

“ “ “ “ Pad (braided

cot ton)...........................................................

Crank Conmjcting Rod Oil Pad Sto|) Pin

Face Plate

..........................................................

N'O. IU..STK .NAME

Itilll 8911 Face Plate Pin

..............................................................

2S(ii) 8901 “ “ Thumb Screw....................................

54019 8902 Feed Bar with 50129(: and two 453c

...................

54020 8902 “ “ (lonnection............................................

57225 8901 “ “ Hinge Pin..............................................

453c 8901 “ “ “ “ Set Siu'ew

.......................

54111 8902 “ Connecting Rod with 1057e, 54112

and two 89t)E.................................................

*54112

------

Feeil Connecting Rod Cap

...................................

89(ìe 8904 “ “ “ “ Screw

..................

1057 E 8904 “ “ “ Clamping Screw. . .

.54023 8911 “ “ “ Hingi‘Pin

................

21.500 8904 “ “ “ “ “Collar
with 457c

........................................................

457(; 8904 Feed ('onneeting Rod Hinge Pin Collar

Set Screw........................................................

384 !)2 8937 Feed Dog.................................................................

157.1 8901 “ “ Screw

.50429c 8901 “ “ Stoi> Screw. . )
*51024 - — “ Flccentric
*23729 -

....

“ “ Bod,y

443c 8904 “ “ “ Set Screw

7071 8901 “ “ Clamping Washer

..........................................

...

...................................

.....................................................

..............................................

........................

.............

217n 8904 “ “ “ “ Screw..

61171 89(11 “ “ Pre.ssure Spring

.................

21332 8904 “ “ “ “ Cap

9.34.1 8904 “ “ “ “ “ Screw

54025 8900 I'eed FOccentric (adjustable) complete.

Nos. 2l7n, 934.1, 1103c, 7071, 21332,

23729, 54024, 01171 and two 443c................

1103c 8904 Fe(!(l Regulating Screw

..........................................

54020 8905 “ Rocking Frame with two 453c....................

.57234 8911 “ “ “ Hinge Pin

.................

.57235 8900 “ “ “ “ “ Bushing

.453c 8901 “ “ “ “ “

Set Screw........................................................

453c 8901 FTed Rocking Fh'ame Hinge Pin Set Screw

54100 8933 Loo|)cr (back) closed eye

......................................

Note. When ordering No. 54100, state gauge of

machine for which required.

1147c 8922 Looper (back) Set Screw

54107 8933 “ (front) closed eye

........................................

.................................

Note, When ordering No. 54107, state gauge of

machine for which required.

1120c 8907 Looper (front) Set Screw

........................................

...

..

20

PARTS IA)li MACIilNK Xo. 117-21

P.UiTS FOR MACHINK No. 147-21

NO. I’i.ATI-

51027 suoli

171 F SUOii

5102S SUO.i

501)07,1 SUOI)
5I02U suoli
5IO:iO SUI)!)
50ÌÌ0.S.1 SUOI)

41ti<; SUOI

4uoi;ì SUOI

5 ioni .SUOI)

*5 10:ì2

------

sull) SUOI)

5 UKi.'l SU07

*5 ion i S905

51I)S0 SUOI)

70iK SUOI

U lSi) SUDO

01:115 S907

227i) SU07

40.120 8907

O lili) S907

51001 S922

701,1 SU07

Olii 19 S922

51002

------

5400:1

3S150 S907

ll;i:li: S907

G4:i20 S907

11:1;1j.; S907

oi:i2l S907
52992 S907

N.) .M K

Loopcr (’imiiT will) two 171f

.........................

‘‘ Adjiistiiiff SiTi'W....................

“ “ 1,'onni'i'l ion

.........................

“ “ “ ()il Plug Screw
“ “ “ Shiift

.................

“ “ “ “ Bu,')hing

('up Screw......................................................

Looper Can ier (.'oiinecl ion Sliafl Hu,shii)g

Set .Screw.......................................................

Loopi'f Carrier ('oiineci ion .Sliaft Oil Pad

(Oraided cot Ion I

.........................................

Cooper ('artier Driver with 540:12 atid

four :1U11)

LoojHT Carrier Driver ('ap

....................................................

..........................

“ “ “ “ Screw..................

“ Driving Shaft and b'etal fyilting

Keci'iitiie with 227ii atid two 04:115, , ,

Loo|)er Driving Shaft iind Feed lafting

Keceiilne llraekel with 701r:

.......................

Loo|)er Driving Shaft and I’laal Lifting

Lecenirie llraekel Hushing...........................

iatoper Drivitig Shaft and l''eed Lifting

Kecentrie Hracket Hushing Set Screw, .

Looper Driving Shaft and Feed lafting

Kecentrie Hracket Screw.............................

Loo])er Driving Shaft and Feed Liftitig

Kccetdrie Oil Hole Plug

...............................

Looper Driving Shaft and Feed Lifting

Kecentrie Oil Hole Screw

............................

Looper Driving .Shaft and I’eed Lifting
Kcci'iitrie Oil Pad (liraided cotton), , , .

laioper Driving .Shaft ami Feed Liftitig

Kcectitrie .S|.rew

..........................................

Looper Hoidi'r with ll'JIlc and 1147c, . . .

“ “ .Screw

..........................................

Needle Har (hollowi..........................................

Needle Har conipleli', for 3L in. to H in.

gauges, Nos. 51001, 51005 and 04:119, .

■Needle Har ei)inplete, forin. to s i't.

gauges, Nos. 51(M')4, 5101)0 and 041119, .

Neetlle Har Hushing llowerl

............................

“ “ “ “ .Set Screw . ,
“ “ " (u])per)

...................

“ “ “ " Set Screw , .

“ “ Connecting Link

.............................

“ ‘‘ •' “ Hinge Stud

,\(). I'l.vri.; N.vMK

152lln .S9I17 Needle Har Connecting Link Hitige Stud

..

Nut..................................................................

04112:1 8907 Needle Par ('onneeting Stud with 219f

and two :1U9e

.............

..................................

.'lUUr; 8UII7 Needle Har C'onneeting Stud Clamping

Screw..............................................................

541104 S922 Needle ('lamp with two 1498k

.........

5101)5 8922 " “ 'I'hread Guard, for 3L in.
to li in. gauge.s, for 54002

.............................

54000 8922 Needle Clatnp Thread Guard, for j-j in. to

s in. gauges, for 54003

176i)

219k

1 198k

8922

Needle Guard, for in. to ^ in. gauge.s.

8922
8922
8907
8907
8907
8922

“ “ “ A in. to 3®^ in. gauge.s.
“ “ “ A in. to 3 ^ in. gauges
“ “ Holder

“ “ “ Screw...............................

“ “ .Screw
“ .Set Screw

..................................................

Oil Tube..............................................................

“ “ Hracket

8908

“ “ I'acking (felt)

8908

Oil Tube cotnplete, for oiling Crank Cotr-

.................................................

54067
54068

.

54069
54038

51108

541(10
49092
54110

................................

......................

.......................

........................................

necting Hod (upper bearing) Nos.

64330
25303
64331

1133E

38456

1133E

54039

49092, 54108 and 54109

8918

Pres.ser Har with 25303....................................

8907
8911
8907
8907
8907
8908

“ “ Hall, .size M in
“ “ Hushing (lower)
“ “ “ “ Set Screw...
“ “ “ (upper)

“ “ “ “ Set Screw,. .
“ “ Guide Bracket wdth 453c,

640,1 and 1963

................................

.......................

.......................

......................

............................................

640,1 8907 Presser Bar Guide Bracket Adjusting

Screw

..............................................................

11173 8908 Presser Bar Guide Bracket Guide

...........

417c 8908 “ “ “ “ “ Set Screw

1963 8908 “ “ “ “ Roller and

Stud.................................................................

453c 8901 Pre.sser Har Guide Bracket Set Screw. . . .

572.57 8911 “ “ Lifter.......................................

5725S 8911 “ “ “ Hinge Pin

.......................

447c 8908 “ “ “ “ “ Set Screw..

1872 8908 “ “ “ Roller and Stud

.............

1250c 8911 “ “ “ Stop Screw.......................

61047 8911 “ “ Lifting Bracket with 460c

and 1872

.........................................................

Ui'TS FDR M.\CillNE No. 147-21

P,

ri,.\TK \ .\ M1-;

N'( ).
oi:i02 8918
01075

400c

.54io:i

lOlu

1701)

80211
51010
,38408

51201 8933 “ “ N*‘(‘dli' ( luard

2421)

Pri'sser Bar Lifting Lever................................

8911 “ “ “ ' () n II (• (■ t i n ^

stud

................................................................

Presscr Bar Lifting Lever Connecting

,8910

Stud ,Set .Screw

Presse!' Bar Lifting Lever Extension

8905

890.8

8907

“ “ “ “ Screw

(left)

...............................................................

Presse!' Bar Lifting T.ever Extension .Screw

(right 1

890.8

Presscr Bar Lifting Lever Hinge Screw.. .

.8905

“ “ Spring (Hat )..........................................

8908 “ “ “ Stud
891 1

“ T'oot Hinge Pin

............................................

...........................................................

.....................................................

........................................

.....................................

.89:i:i

“ “ “ “ .Screw

...............................................

.............

51202 “ “ Plate........................................................

400.87

—

5120:i 8933

“ “ ¡Shank

....................................................

Pn\s.s(‘r l''()()t (hinged) (‘omplclc, Nos.

2iV27{\, ili()S7, 51202 and two carli 212d

.890.8

190i)

.8908

57 i,i

15:ì9j 8908

and 51201
Pi'i'ssi'r Foot Scr<“W
Pre.ssure Regiilaling 'Thumb Screw

“ “ “ “ L o c k

......................................................

......................................

..............

Nut.................................................................

.8908

oi:ì30

4Г)0:15

Slack Thread ('ontrolh'r

.8908

“ “ “ ('lamp....................................................

..................................

190i) 890.8 “ “ “ “ Screw. . .

S{r22 “ “ Regulator ....................................

04337
54012

890,8

“ “ “ Holder with 175e

............

and 50150c.....................................................

175e 8908

Slack Thread Regulator Holder ( 'lamping

Seri'W............................................................

5toi:i 8908
24292

1019c

Slack 'Thread lieguiator Holdia' Shaft

89t)8

Collar with 1019c

.Slack 'Thread Regulator Holder .Shaft

8908

(.'oliar Set Screw

.......................................

..........................................

54044 8908 Slaek 'Thread liegvdator Holder Shaft

1253c

('rank (forked.) with 1255c

Slaek Thread Regulator Holder Shaft

8008

..........................

( 'rank Set Sei-evv.........................................

501,50c 8908
35717 8935
35718

8935
—

35719

Slack 'Thread Regulator Set Screw

.Stay Cuide (lower;

“ “ (upper)

...........................................

......................................................

Stay Guide complete, Nos. 35717 and

................

35718..............................................................

PAR'l'S FOR MACHINE No. M7-21

.\(). Г1.ЛТК NAME

1 li)9i) S'.):Sr> stay Cuille Screw..............................................

2102 StlO’J Tcn.sion (under thread) Disc................................

1500c S909 “ “ “ R e g u 1 a t i u g.

TliuinVi Nut...................................................

501 ISc S909 Tension (under thread) Screw Stud

1240S7 - “ “ “ “ “ 501-lSc

with 15G0<;

...................................................

425:17 8909 Tcmsiun (under thread) Spring...........................

i:i915 8909 “ “ “ “ Bushing.

17547 8909 “ “ “ Thread Guide.. .

54070 8931 “ (u|)per thread) Bracket.........

;i70i) 8909 “ “ “ “ Screw...

2102 8909 “ “ “ Disc

............

1500c 8909 “ “ “ Regulating

'I'hiunl) Nut

...................................................

112572 8909 Tension (upper thread) Releasing Disc. . .

51988 8909 “ “ “ “ Pin....

54071 8922 “ “ “ “ Shaft
54017 8909 “ “ “

Crank with 024c

............................................

54048 8909 Tension (upper thread) Releasing Shaft

(.hank Link

....................................................

024c 8909 Tension (iii)per thread) Releasing Shaft

( л-апк Set Screw

..........................................

54990 8909 'Pension (up])er thread) Releasing Shaft

Spring.............................................................

310f 8909 'Tension (upper thread) Releasing Shaft

1547j 8909 'Tension (upper thread) Releasing Shaft

Stop Screw

.....................................................

Stop Screw Nut..............................................

5013.'lc 8909 'Tension (upper thread) Screw Stvid

...................

52975 8909 “ “ “ Spring
i:i915 8909 “ “ “ “ Bushing..
17547 8909 “ “ “ Thread Guide.. .

54201 8931 Thread liubricating Oil Ciij).............................

57029 8931 “ “ “ “ Pad (felt)...
54205 8931 “ “ “ “ 'T bread

Guiile

..............................................................

217j 8904 'Tliiead Lubricating Oil Cup Thread

Guide Screw...................................................

54200

------

'Thread Lubricating Oil Cup complete,

Nos. 217j, 512Ü4, 54205 and 57029. . .

38225 8909 'Thread (under) Eyelet (back)

190i) 8908 " “ “ “ Screw
51072 8931 “ “ “ (front)
04351 8909 “ “ Ni])|)er Cam with 465c...

405c 8909 “ “ “ “ Set Screw..

23

.....

...

...

.......

...

AliTS FOli MACIIIXF No. M7-21

No.

3S210 8909
38211

46217

38475

46017
,54019 8905

38482 8910

04355 8910

01356 8910

04357 8931

46009 8931

54094 8022
54095
54716

51096

46011

8909
89(H)

176i) ,8907

.8910

4ti5r 8909

8931

8910

tmöl)

16011 8900

8908

lOOi)

207i) 8910

8910

160c

8910

207 и

8908

190n

8922
8922

1419d 8922

—

219f

8907
8937

742 E

8910

; ХЛМ1-:

'I'lircad (under) N'lpper Spring (iower) . . .

“ “ “ “ (upi)er)...

“ Stop

“ “ “ “ Screw....

“ “ 'Гаке-Ч|) \vill\ -Kior

“ “ “ Set Screw....................

“ “ “ Staple
“ “ “ “ Bracket

witti dtiOc......................................................

'riiread (under) 'Гак('-и|) Stajde liracket

Screw..............................................................

'Pliread (under) 'I’ake-iip Staple Spring

Screw

.............................................................

Thread (under) d'ake-up Stripper

“ “ “ “ Screw..

“ “ “ Thread Guard

(brass)............................................................

Thread (under) Take-u)) Thread Guard

Steady Pin

Thread (under) 'Гаке-И]) Thread Guard

Steady Pin Set Screw....................................

Thread (upper) Controller...............................

“ “ “ Screw
“ “ liyclet
“ “ “ Screw

“ “ Take-up.................................

“ “ “ Plate

“ “ “ “ Spring ....

“ “ “ “ “ Screw

'J’hread (upper) Take-up coin])lcte, No.s.

l il'Jo, 01095 and 54710
d'hread (upper) Take-up Set Screw

'I'hroat Plate for 38492....................................

“ “ Screw.............................................

.....................................................

.....................................

............................

............

....................

................

........................

.....................

................

...............

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-22

FOR VAMPING AND FOXING SHOES, TWO NEEDLES, ONE

LOOPER, GAUGES FROM 3^2 TO A IN. ROLLER PRESSER.

This Machine will take the place of 62-50 Machine

NO. l>t..\TE NAME

*54182

---------

Arm, upper and lower (solid) with 948d

and 54034

42366 8901 Ann Oil Pad (braided cotton) for oiling

Arm Rock Shaft F’ront Bearing

56006 8901 Ann Oil Pad (braided cotton) for oiling

.Arm Rock Shaft Intermediate Bearing

11119 8901 Arm Oil Tube with 29599, for oiling 64321

29599 8901 “ “ “ Packing (felt)...............................

54183 8932 “ Rock Shaft....................................................

64386 8901 “ “ “ Bushing (back)

44(>c 8901 “ “ “ “ “ Set Screw

64388 8901 “ “ “ “ (intermediate).

423c 8901 “ “ “ “ “ Set,

Screw

52045 8901 Arm Rock Shaft Bushing Oil Pad (braided

cotton)

.......................................................

..................

..............................................................

............................................................

..

2(i PAliTS I'Oli MACIilXK Nil. 117-22

ARd'S FOR MACHINE No. 147-22

27

Ml. r;,.\TK NAMK

Г)!001 MKIl Ann liiii'k Shaft ('olhif with twii iriijc. . .

■irihc SOIIl “ “ “ , “ Set Screw

....................

fills I S!):i.'l “ “ “ Crank (back) with two

fiOOSiic

.........................................................

fiOOSih; SDtIl Arm liock Shaft Crank (back) Set Screw
ti I25fi Still “ “ “ “ (front) withloijc.

2117 SllOl “ “ “ “ “ I’i".............

-lf):ir StIOl “ “ “ “ “ Set Screw

frllOf) StKIl “ “ “ 1''Ь1ПК(ч1 linsliing (front)

fj201fi SllOl “

Oil Pail (braiili'il cotton)

..............................

■Ifhic StIOl Arm Pock Shaft l'’langed Bn.shing (front)
Set S(Tt‘\v

......................................................

filOOti StIOii Arm Rotary Shaft.................................................

b-lOSl SllOl “ “ “ Buahing (front)

............

5204fi SllOl “ “ “ “ “ Oil Rad

(braided cotton)

............................................

701E StIOl Ann Rotary Shaft Rushing (front) Set

Screw..............................................................

51007 S1I02 Arm Rotary Shaft Rushing (intermediate)
5-lOStl

------­54007 with 42:i()7 and tilfrOS

.....................

0450S 8002 Arm Rotary Sliafl Rushing (intermediate)

Oil Pad, long (braided cotlon)

.....................

42307 StIOl Arm Rotary Shaft Rushing (intermediate)

Oil Pad, short (braided cotton)

....................

422c 8901 Arm Rotary Shaft Rushing (intermediate)

Set Screw (long).............................................

50084c 8901 Ann Rotary Shaft Rushing (intermediate)

Set Screw (short)...........................................

51008 8901 Arm Rotary Shaft Collar with two 1258c.

12.58c 8901 “ “ “ “ Set Screw......

540011 8902 “ “ “ I'danged Rushing
54090

---------

“ “ “ “ “ 54009

with 12307 and .5.8039

.................................

58039 8902 Arm Rotary Shaft I’langed Rushing Oil

Pad, long (braided cotton)

...........................

42307 8901 Arm Rotary Shaft I'danged Rusliing Oil

Pad, short (braided cotton)

..........................

159f 8901 Arm Rotary Shaft I'danged Rushing Screw

49013 8904 “ “ “ l''ront Rearing Oil Rad

(braided cotton)

............................................

14 Id 8901 Arm Rotary Shaft Screw.......................................

15190 8902 “ Side Cover (liack)

................................

280d 8904 “ “ “ “ Thumb Screw.. .

54010 8904 “ “ “ (front)................................

2801) 8904 “ “ “ Thumbscrew...

NO.

CI.ATl'

51210 892 1

Ralance Wdieid, 2''s in. pulley, with two

NAME

430c.................................................................

8904

430c

,8903

54011

101 iF 8901

50173f

8901

51012 8902

—

54013

Ralance Wheel Set Screw

Cloth Plate..........................................................

“ “ Screw (left)

“ “ “ (right)

“ “ Slide (left)

(doth Plate Slide (left) corniilete. Nos.

.................................

.......................................

..............................

....................................

38119, 54012 and two 725j............................

38419

725,1 8901

8913

54014

.54015

8904

38419

8904

72.5J

51010

—

,54104 8913

8904

123,51)

8902

51017

Cloth Plate Slide (left) Spring

“ “ “ “ “ Screw. . . .

“ “ “ (right)

Cloth Plate Slide (right) complete, No.s.

38119, 54014 and two 72.5j

Cloth Plate Slide (right) Spring

“ “ “ “ “ Screw...

Cloth Plate comiilete. Nos. 54011, 54013

and 54015

.......................................................

Cloth Plate Thread Guard................................

“ “ “ “ Screw.....................

Crank Connecting Rod with 0575, 54018,

..........................

.................................

...........................

.......................

8904

51218, 54897, 57222 and two each 890e

8904

50009c

1,5I0e 8901

and 1057e

Crank Connecting Rod Rail Screw Stud

a it u u ii u

.............................

.........................

Nut..................................................................

(14208 8904

»,57222

890e 8904

»54018

10,57 k

...

54897
54218

057.5

04209 8913

40111

280г)
.54019
54020
5722,5 8904

453c

.54111 8902

»54112

890 E

('rank Connecting Rod Rail Screw Stud

Washer

________

Crank Connecting Rod Cap (lower)

—

8904
8904

8901

8904

Crank Connecting Rod Oil Rad Stop Pin

.................................

“ “ “ “ “ Screw
“ “ “ “ (upper)
“ “ “ “ “ Screw
“ “ “ Oil Cup
“ “ “ “ Pad (braided

cotton)

............................................................

F’ace Plate..........................................................

8911
8904
8902
8902

“ “ Pin.......................................................

“ “ Thumbscrew

......................................

Feed Bar with 50429c and two 453c

“ “ Connection

..........................................

“ “ Hinge Pm.............................................

8901

“ “ “ “ Set Screw........................

“ Connecting Rod with 1057e, 54112

—

and two 89Ge

I'ecd Connecting Rod Caj)

8904

“ “ “ “ Screw

................................................

...............................

.........................

............

...........

.......................

................

...................

2S

PARTS F()]{ MACHIXE No, 1-17-22

PARTS FOR MACHINE No, 147-22

29

XO. in..\TE

1057e 8901

5-1023 8911

21500 8904

-157(- 8904

8937

54185

8904

157j

8904

50429c

•54024
*23729

8904

443c

8904

7071

8904

217i)

8904

01171

8904

21332

8904

93-1,1

8900

54025

1103c 8904

54020 8905
57234 8911
57235 8900

453c 8901

453c

8901

46000

8911

54027

54028
50607J
54029
54030
50008J

17 If

8900
8900
8900
8900
8900
8906
8906

440c 8901

49013 8904

54031 8900

*54032

--------

391D 8900

54033 8907

XAMK

Feed C'onnecting R(k1 Clamping S(.Te\v, . ,

“ “ “ Hinge Pin......................

“ “ “ “ “ C-ollar

with -157c

......................................................

I'Aed Connecting Rod Hinge Pin Collar

Set Screw

.......................................................

I'eed Dog............................................................

“ “ Screws

“ “ Stop Screw
“ Eccentric
“ “ Body
“ “ “ Set Screw
“ “ Clamping Washer

................................................

.........................................

.....................................................

..............................................

.......................

.................

“ “ “ “ Screw.
“ “ Pressure Spring

...................

“ “ “ “ Ca|)..........

“ “ “ “ “ Screw

Feed Eccentric tadjustable) complete,

Nos, 217d, 934j, 1103c, 7071, 21332,

23729, 54024, 01171 and two 443c

_______

Feed Regulating Screw.....................................

“ Rocking Frame with two 453c
“ “ “ Hinge Pin
“ “ “ “ “ Bushing

U U U i< u u

Set Screw

.......................................................

...................

................

Feed Rocking Frame Hinge Pin Set Screw
Looper w'ith 590d and 38393

“ Carrier with two 171f
“ “ Adjusting Screw

..........................

..............................

.........................

“ “ Connection..................................

“ “ “ Oil Plug Screw
“ “ “ Shaft
“ “ “ “ Bushing

U (( U ii (<

...............

Cap Screw......................................................

Looper Carrier Connection Shaft Bushing

Set Screw

.......................................................

Looper Carrier Connection Shaft Oil Pad

(braided cotton)

............................................

Looper Carrier Driver with 54032 and four

391d................................................................

Looper Carrier Driver Cap

“ •' “ “ Screw

.............................

.................

“ Driving Shaft and Feed Lifting

Eccentric with 227n and two 64315. , ..

XO. N,\MK

*54031 8;i05 Looiier Driving Shaft and Feed Lifting

Eccentric Bracket with 761e

........................

51080 8900 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Bushing...........................

7t)lE 8901 Looper Driving Shaft and Feed Lifting

Eceeniric Bracket Bushing Set Screw.

9480 8000 Looper Driving Shaft and Feed Lifting

Eeeentric Bracket Screw

..............................

01315 Si)07 Looper Driving Shaft and Feed Idfting

Eccentric Oil Hole Plug.

....

.........................

227d 8907 I>ooper Driving Shaft and Feeil Lifting

Eitcentric Oil Hole Screw.............................

40320 8907 Looper Diiving Shaft and I’eed Lifting

Eccentric Oil Pad (iiraided cotton). . . .

040d 8907 Loo)ier Driving Shaft and Feed Lifting

Eccentric Screw.............................................

54035 8907 Looper Holder witli 1120c

....................................

704,1 8i)07 “ “ Screw............................................

1120c 8907 “ Set Screw..........................................

38393 8907 “ Thread Guard.......................................

590i) 8907 “ “ “ Screw..............................

54180 8933 Needle Bar (hollow)...............................................

54187

38450 8907 Needle Bar Bushing (lower)

------

Needle Bar complete. Nos. 2273, 46070,

40100 and 54186

............................................

............................

1133e 8907 “ “ “ “ Set Screw. . .

04320 8907 “ “ “ (upper)

.......................

1133e 8907 “ “ “ “ Set Screw...

04321 8907 “ “ Connecting Link...........................

52992 8907 “ “ “ “ Hinge Stud

1520e 8907 “ “ “ “ “ “

Nut..................................................................

04323 8907 Needle Bar Connecting Stud with 219f

end two 399e..................................................

399e 8907 Needle Bar Connecting Stud Clamping

Screw

..............................................................

40106 8933 Needle Clamp with 462f

...........................................

40070 8933 “ “ Gib.............................................

2273 8933 “ “ Pin

402f 8933 “ “ Screw
5-4037 8907 “ Guard
54038 8907 “ “ Holder

17Gu 8907 “ “ “ Screw

.............................................

........................................

.........................................................

.......................................

...............................

219f 8907 “ “ Screw.........................................

54188 8933 Oil Cup...................................................................

1284d 8933 “ “ Regulating Screw

2020 8933 “ “ “ “ Spring

..................................

....................

:ìo

l-AKTS l’Oli ¡UACIIIXK No. 1 Ì7-22

PARTS LOR MACHINE No. 147-'22 31

M). l’i.A'n-:

;ìsi()0 .s'.):ì:ì

filisi) - -

M23.I S!):ì:i

fili OS

5110!)

------

.)i)0i)2 Silos fillio Silos

(ilOlO

I issi:

liSlfiO

ii:ì3k

filosi)

S908
S907

Silos

Si)07
Si)07
S!)07

Silos

57255
25:5o:ì

(ilO.i S907

in 73 Silos

.117c Silos

1903 S90S

4fi3c Siiti 1

57257 Siili

5725S Siili

417c Silos

1S72 Silos

1250C S911

01017 SDII

01302 8918

01075 Siili

40()i; 8910

51103 8905

Itili) Silos

IVtii) 8907

S02ii 8908

filino 8905

3S11ÌS Silos

fi71J Silos

N A M K

()il ('up I’arkinfi (fell I......................................

(Ill Cup coiiipletc, for oiliiiff upiH'i- llm-iul,

.Nos. 12S1II, 2020, 38100 and 51188 ....

Oil ('up Sri ew

...................................................

“ Tulie...............................................................

“ " Bracki“!................................................

“ Parkin;;; (fell)..................................

Oil Tiilir riiiuplrte, for iiiling Crunk Cim-

nrrlin;; Rod (iipiirr lirarins) N'os.

19IHI2, 51108 and 51109

Prrssrr Bar with 25303

“ “ Ball, ,sizr in

.............................

.....................................

....................................

“ “ Biishinr (l(iwrr)...............................

“ “ “ “ iSrl Screw. . .
“ “ “ (nppi'r)

........................

“ “ “ “ Set Screw.. .
“ “ (Inide Bracket wdh 153c,

010.1 and 1903...............................................

Preascr Bar (luide BracktA .Idjiisl in«.;

Screw..............................................................

Pre.s.scr Bar Guide Bracket Guide

.................

“ “ “ “ Set Screw
“ “ “ “ U (i 11 e r a n d

Stud

................................................................

Pre.Aser Bar Guidi' Bracket SiA Screw. . . .

“ “ Lifter..........................................

“ “ “ Hinge Pin

................

“ “ “ “ “ Si't Screw. .
“ “ “ Roller and Stud
“ “ “ ¡Slop Screw

...........

...............

“ “ Tafting Bracket with IfiOc

and 1872.........................................................

Pre.s.scr Bar Lifting Lever

..............................

“ “ “ “ Connecting

Stud................................................................

Presser Bar Lifting Lever Connecting

Stud Set Screw

Pressi'r Bar Lifting I.ever Exteu.sion

..............................................

.............

“ “ “ “ “ Screw

(left)................................................................

Presser Bar Lifting Lever Exlensiiiii Screw

(right) ............................................................

Presser Bar Lifting Lever Hinge Screw...

“ “ Spring i Hat I

.................................

“ “ “ Stud......................................

Pre.ssure Regulating 'riuunh Screw

...............

NO. l'I,.\TK

1,539.1 S908

1 SOS 8931

1923 8931

38219

1517.1

3S302

31 Of

1.517.1
7550

17th)

1.519.)

52009

17If

0.5211

152.8.1

52070

llIlF

8931
8931
S931
8909
8934
8909
8909
S934
8907
8931
8934

S900
8934

8934

8934

3S2S5

52071 8934

1901) 8908

04330 8908

40035 8908

lililí) 8908
04337 8922
54042 8908

175k 8908

54043 8908
24292 8908

1019o 8908

54044 8908

1253c 8908

50150c 8908

.NAMF

Piessure Regulating Tluunl) Screw Lock

Nut......................................................................

Roller, Js in, diarn., coarse, w'ith G52i)

and 152S.I, for 52070

....................................

Roller, 1 in. diarn., coai’se, with 052i)

and 1528.1, for 52071

Roller .Ann for 52070

“ “ “ 52071
“ “ .Adjusting Screw
“ “ “ Nut

....................................

........................................

........................................

.............................

...........

“ “ Bracket.............................................

“ “ “ Screw Centre................

“ “ “ “ “ Nut...
“ “ Lock Spring
“ “ “ “ Sci'ew

“ “ “ “ “ Nut

................................

.........................

................

“ Needle Guard (round)..................

“ “ “ “ Set Screw.

“ Screw...........................................................

“ “ Nut

..................................................

Roller Pre.s.scr complete, Ls in- coarse

roller, No.s. 171f, 176i), 440f, 1549j,

1S08, 7550, 38'285, 38302, 52609, two

310f and three 1547j

.....................................

Roller Presser complete, 1 % coarse

roller, No.s. 171F, 176d, 440f, 1549j,

li)23, 7550, 38219, 38302, 52009, two

310f anil three 1547j

Roller Presser Screw

Slack Thread Controller

“ “ “ Clamp

.....................................

.........................................

...................................

...................

“ “ “ “ Screw. . .
“ “ Regulator

........................................

“ “ “ Holder with 175e

and 50150c......................................................

Slack Thread Regulator Holder Clamping

Screw...............................................................

Slack Thread Regulator Holder Shaft

U (( U u a

Collar with 1019c...........................................

Slack Thread Regulator Holder Shaft

Collar Set Screw

............................................

Slack Thread Regulator Holder Shaft

Crank (forked) with 1253c............................

Slack Thread Regulator Holder Shaft

Crank Set Screw

Slack Thread Regulator Set Screw

...........................................

..................