Singer 147-108, 147-105, 147-107, 147-104 User Manual
Specifications and Main Features
- Machine Models: These models are 147-104, 147-105, 147-106, 147-107, and 147-108
- Configuration: There are Two needles and two loopers in the configuration.
- Needle Set Tandem: In the models 147-104, 147-105 and 147-108 they have a distance of 3/16 inches apart, and in model 147-106 there is a distance of 3/32 inches set apart.
- Ball Bearing: The models designed do have ball bearings.
- Needle Bar Stroke: The models 147-106 range between 7/32 inches, models 147-105 and 147-107 have a range of 5/16 inches and model 147-108 has the range of 3/8 inches.
- Speed: For models 147-104, 147-105, 147-106 and 147-107 the speed reaches 4000 R.P.M and for model 147-108 the R.P.M reaches 3800.
- Oiling System: All principal bearings have been improved and an automatic oiling system is equipped for them.
- Gauge: This depends on the model being used, if models 147-106 and 147-107 are used then a gauge of 1/32 inch can be used.
- Accessories: Parts of foot lifter, knee lifter parts, oil drain jar, belt guard, thread unwinder
Frequently Asked Questions
- Q: What type of oil should I use for the machine?
- A: TYPE B or TYPE D is recommended and can be purchased from Singer Sewing Machine Company.
- Q: How often should the machine be oiled?
- A: It is recommended that the machine be oiled at least twice daily when in constant use.
- Q: What is the top speed limit of this sewing machine?
- A: Most of these machines can go as fast as 4000 rotation per minute but a model 147-108 has a cap of 3800 R.P.M.
- Q: Is there a recommended brand for needles of this machine?
A: Using Singer needles with the trademark “SIMANCO” is strongly advised.
- Q: What is the difference between different machine models of sewing machines?
A: Although there are several sewing needle models, there are a few select models where the needles are set separately by tag team together with 3/16 inch spacing. Please consult the section-tailored direction book for these models for setup instructions.
- Q: Is it possible that the sewing machine has more than two needles?
A: The ordinary sewing machine retains two needles and two loopers which enables it to construct several things.
- Q: Can I have access to the machine when it is under warranty?
A: For this you have to either contact your Singer dealer or check the pamphlet that accompanies the purchase.
- Q: How long will it take for me to receive the replacement part?
A: For any replacement part order use the part number shown in the list that we included in the manual.
User Manual
Loading...