SINGER 147-102 User Manual

Form 19088 ( 837 )

Printed in U. S. A.

LIST

PARTS

MACHINES

Nos. IA7-I02 and 147-103

A TRADE MARK OF

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

These machines are equipped with an oiling system which autonal ical ly delivers the proper amount of oil to the principal bearings of the machine.

Oil In a resei-volr In the arm Is picked up by a scoop

In the connecting rod and lubricates the various bearings Inside the arm by splash. A cup w'thin the arm catches some of this oil, and connecting pipes and wicks distribute it to the principal bearings outside the arm.

IN ORDER THAT THIS SYSTEM MAY OPERATE, IT IS ABSOLUTELY

NECESSARY THAT THE OILING INSTRUCTIONS GIVEN IN FORM 18930,

Instruction Book for these Michiries, be followed to the

letter.

Use either Singer "OIL FOR HIGH SreED SEWING MACHINES (Cloth and Uiather)'' for general use, or "STAINLESS OIL FOR HIGH SPEF.D sewing MACHINES" wtiere a stainless oil is de-

s ired.

INDEX

Page

Accessories........................................................................................................ 22

Belt Guard.......................................................................................................... 22

Bench Stand....................................................................................................... 22

Fittings for hbchlne 147-102.............................................................. 20

Fittings for №chine 147-103.............................................................. 21

Foot Lifter Parts................................................................................................. 23

Knee Lifter Parts................................................................................................ 23

Lap Seam Feller................................................................................................. 22

by Th* Singer Manuiaclurmg Co,

All Rights R»s«rv«ri lor nil Countrins

hbchlne Base...................................................................................................... 24

Machine Base Oil Drain Jar

Machine No. 147-102.......................................................................................... 5

Machine No. 147-103........................................................................................ 18

Numerical List of Parts......................................................................... 27

Thread Unwinder,.............................................................................................. 25

......................................................................

INSTRUCTIONS FOR ORDERING

In ordering from this list, use CMLY the part NUMBER In the

FIRST coiumn-

The number stamped on a Sewing Machine Part is In every case

Che number of the single part only.

Every combination of parts sent out as such has its ’peclflc

number, which, although not stamped on the parts, must be used when ordering the combination.

Each number always Indicates the SA^E PART In whatever list

It appears, or for wliatever machine.

The letters aTter some of the numbers Indicate the style of

finish only, as follows:

A-Hardened, Polished, Nickel Plated and Buffed B-Poll3hed, Nickel Plated and Buffed C-flardened Only D-Pollshed Only E-Soft, Not Polished F-Hardened and Polished

F.J-Hardened, Polished and Nickel Plated

0-Brlght Rumbled and Nickel Plated H-Blued J-Nlckel Plated Only K-Hardened and Nickel Plated L-Brass Plated M-Oxldized N'Japanned, Dull P-Japanned, Bright R-Merllzed S-Cadmlum Plating

T-Copper Plated T.A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.L-Copper and Brass Plated T.M-Copper Plated and Oxidized

U-Zlnc Plated V-Sllver Plated

W-Pollshed and Nickel Plated

X-Black Oxide, for Iron and Steel

X.C-Hardened and Black Oxide, for Iron or Steel

Y-Black Nickel Plated Only

Z-Chrotnlum Plated Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated

Z.c-Hardened and Chromium Plated Z.J-Nickel and Chromium Plated

These letters MUST BE USED when, they appear In the list; and

A>'TER the number as In the list.

In thli. series:

The figures In the second column refer only to the plates,

Illustrating the parts, and are NOT TO BE USED in ordering.

Parts marked with an asterisk (•) are furnished only when

repairs are made at factory.

When ordering parts which differ as to Gauge (the distance

between seams) the Gauge, as well as the Number must be given on

order.

1 to 1500, 50001 to 51500 and 140001 to 143000

are Screw Numbers

1501 to 1000 and 51501 to 51800 are Nut Numbers 1801 to 3000 and 51801 to 53000 are Roller Numbers

3001 to 50000 and 53001 to 140000 and 143001 to

190000 are Sewing Machine Parts, 190001 and upvjard

are numbers of Electrical Parts.

LIST OF PARTS COMPLETE

FOR

/AACHINE No. 147-102

For Lap Seam Felling Medium and Medium Heavy Work Shirts, Jumpers, Overalls and Work of a Similar Nature. Two needles,two loopers. Gauges 3/32 inch to 1/2 inch. Ball bearing. Needle bar stroke I 5/16 inches. The loopers are arranged so that

they maybe thrown out of position for convenience in threading. An improved oiling system automatically oils all oP the principal bearings of the machine. Speed up to 4000 R. P. M., according to the material being stitched.

No.

•131446

68428 68429

1057C

50608R

139017

68350

Plate

20529 20529 20530 20530

20530 20530

Arm, upper and lower (solid) with 948J,

15404, 68483, two 15405 and four 131022

Arm Bottom Cover

" " " Gasket (cork)................................

" " " Screw............................................

" Hole Plug Screw for access to Crank

Connecting Rod (upper bearing)

Arm Hole Plug Screw Washer

" Oil Cup, for oiling Arm Rock Shaft

Front Bearing

Name

..................................................................

........................................................

...........................

.......................................

........................................................

PARTS FOR MACHINE No. 147-102

No.

•68430

131309

131305

131319

131310 131293 131474

1309C

131056

68433 68435

131095

68436

131486

50083C 131475 127838 131456

42365

54969

1235Г

131487

Plate Name

-------

20529 " " " 68430 with 131310, for fill

20529 Arm Oil Cup Drip Pan with two 563C

20530 " " " 11 » Position Screw.................

563C

20530 ” " " Oil Pad (braided cotton) for

20529 Arm Oil Cup Oil Tube..................................................

20584 " Rock Shaft................................................................

-------

20530 Arm Rock Shaft Adjusting Screw.................................

20530 11 n « « n Vasher... 20584 nun Bushing (back) 20584 " " " " " Cap

20584 nun « n n Washer

446C

20530 Arm Rock Shaft Bushing (back) Set Screw. 20584 11 n n n (intermediate)... 20530 n 1, „ , „

433C

20584 Arm Rock Shaft Crank, back (ball bearing

20530 Arm Rock Shaft Crank (back) Set Screw... 20584 " - . n (front) with 853C.?

20530 n 11 n Л n 20584 " " " Flanged Bushing (front)..

20562 nun« „ „

453C

20530 Arm Rock Shaft Oil Pad (braided cotton)

20530 Arm Rock Shaft Oil Plug Screw

20592 " Rotary Shaft.............................................................

:.e: Wlien No. 131487 Is required for repairs, the

Looper Driving Shaft and Feed Lifting Eccentric must be returned to the factory to be adjusted to the new part.

131488

131366 131478

-------

20584 Arm Rotary Shaft Ball Bearing (back)....

20529

131479

131526

131369 20529

Arm Oil Cup for 131309.......................................................

ing oil reservoir

............

68350....................................................................

" " " 131293 with 1235P, 127838

and 131475...........................................................

...............................................................

......................

(fibre)

...................................................................

Screw....................................................................

solid) with tW3 50083C.......................................

................

Screw....................................................................

for oiling Back Bearing........................................

for oiling Intermediate Bearing............................

...........................................

Arm Rotary Shaft 131487 with 640E,131111

131489 and 131502..............................................

......................................

" " Case

131478 with 131369 and three 205C...

Arm Rotary Shaft Ball Bearing (back)

Case with Ball Bearings complete. Nos. 131479, 131480 and two 131366..

Arm Rotary Shaft Ball Bearing (back)

Case Cap...............................................................

205C

Plate 20530

20530

No.

131370

429C 20530

131480

20539

131366 20584

131481

1304C

20584

20530

131482 20539

457C 20539

131457 20539

76 IE 20530

42367

54218

131276 131277

20530

144D

20526 " Side Cover (oil vent) 20526

131280 20530

51224V 20530

131278

68448

20529

1057K 20530

131483

128510

51283C

131374

20532

20532 Balance Wheel Cover 20533 20592

68368 20532

131050 20532

725J 20533

131051

131375

20567

131376 20567

131ЭТ7

20567

Arm Rotary Shaft Ball Bearing (back)

Name

Case Cap Screw

....................................................

Arm Rotary Shaft Ball Bearing (back)

Case Position Stud

................................................

Arm Rotary Shaft Ball Bearing (back)

Case Set Screw......................................................

Arm Rotary Shaft Ball Bearing (back)

Spacing Collar.......................................................

Arm Rotary Shaft Ball Bearing (Intermed-

late).......................................................................

Arm Rotary Shaft Ball Bearing (Intermed-

late) Case

..............................................................

Arm Rotary Shaft Ball Bearing (intermed

iate) Case Set Screw

.............................................

Arm Rotary Shaft Ball Bearing (Intermed

iate) Collar with two 4570....................................

Arm Rotary Shaft Ball Bearing (Intermed

iate) Collar Set Screw

Arm Rotary Shaft Bushing (front)

...........................................

.................................

" " " " " Set

Screw.....................................................................

Arm Rotary Shaft Front Bearing Oil Pad,

lower (braided cotton)...........................................

Arm Rotary Shaft Front Bearing Oil Pad,

upper (braided cotton)...........................................

Arm Rotary Shaft Screw................................................

................................................

" " " Cap

......................................................................

" " " " Position Pin.......................................................

" " " " Thumb Screw....................................................

Arm Side Cover (oil vent) complete. Nos.

51224W, 131276. 131277 and 131280...

Arm Side Cover Gasket (cork).«*

.................................

” " " Screw...................................................................

Balance Wheel, 2 In. pulley, with tv«

51283C..................................................................

....................................................

" " Set Screw...........................................................

Cloth Plate

.....................................................................

” " Slide (left)............................................................

" " " " Spring.............................................................

" " " " " Screw...

Cloth Plate Slide (left) complete. Nos.

68368, 131050 and two 725J

................................

Cloth Plate Slide (right) No Throat

Plate clearance cut, for 131382.............................

Cloth Plate Slide (right) 1/16 In.Throat

Plate clearance cut, for 131383

.............................

Cloth Plate Slide (right) 7/64 In.Throat

Plate clearance cut, for 131384

.............................

PARTS FOR MACHINE No. 147-102

No.

Plate

131378 20568

131379

20568

131380 20568

725J

20532 20533

131381

131382

131383

131384

131385

131386

131387

131388

131389

131390

131391

131392

131393

Name

Cloth Plate Slide (right) 1/8 In. Throat

Plate clearance cut, for 131385............................

Cloth Plate Slide (right) 9/64 In.Throat

Plate clearance cut, for 131386............................

Cloth Plate Slide (right) 3/16 In.Throat

Plate clearance cut, for 131387.....

Cloth Plate Slide (right) Spring

....................................

" 1 n fi « Screw..

Cloth Plate Slide (right) complete (No

Throat Plate clearance cut) for 131388, Noa. 131375, 131381 and two

725J......................................................................

Cloth Plate Slide (right) complete (1/16

In. Throat Plate clearance cut) for

131389, Nos. 131376, 131381 and two

725J......................................................................

Cloth Plate Slide (right) complete (7/64

In. Throat Plate clearance cut) for

131390, Nos. 131377, 131381 and two

725J......................................................................

Cloth Plate Slide (right) complete (1/8

In. Throat Plate clearance cut) for

131391, Nos. 131378, 131381 and two

725J......................................................................

Cloth Plate Slide (right) complete (9/64

In. Throat Plate clearance cut) for

131392, Nos. 131379, 131381 and two

725J......................................................................

Cloth Plate Slide (right) complete (3/16

In. Throat Plate clearance cut) for

131393, Nos. 131380, 131381 and two

725J

.....................................................................

Cloth Plate complete, for Throat Plates

with no offset. Nos. 131051, 131374

and 131382

..........................................................

Cloth Plate complete, for Throat Plates

with 1/16 In. offset, Nos. 131051,

131374 and 131383

.............................................

Cloth Plate complete, for Throat Plates

with 7/64 In. offset, Noa. 131051,

131374 and 131384

.............................................

Cloth Plate complete, for Throat Plates

with 1/8 In. offset. Nos. 131051,

131374 and 131385

.............................................

Cloth Plate complete, for Throat Plates

with 9/64 In. offset, Noa. 131051,

131374 and 131386

.............................................

Cloth Plate complete, for Throat Plates

with 3/16 In. offset. Nos. 131051, 131374 and 131387

.............................................

No.

Plate

lOllF 20533

50396F 20533

131394

20592

389F 20533

50473F

131471

20533 ?X)584

131489

896C

330D

20533 20530 20532 20532 20533

20532 20533 20533

20530 20583 20583

20583

1057C 68460 68461

131395

29234

1053E

51224V 131396 131397

131197

59343 20533

73.5C 134258 134259

20533 20533 20533

68495 20533

134260

6846'7

131500

207E

20533 20583 20533

20583

131502

896C

1057C

68497 134260 131032

20533 20530 20533 20533 20585

131321 20587

131093 20586

131241 20589

Name

Cloth Plate Screw (left)

...............................................

' " " (right)..........................................

" " Thread Guard......................................

" " no Screw (lower).. " " r « " (upper)..

Crank Connecting Rod with two each 896C

and 1057C

............................................................

Crank Connecting Rod 131471 with 131486.

" " " Cap (lower) Screw.. " " » " (upper) Screw..

Face Plate (lower half)

.........................................

" " " " Gasket (cork)... ' " " " Screw

.........................

" " (upper half)................................................

" " " " Position Plate..

n n N II w M

Screw

....................................................................

Face Plate (upper half) Thumb Screw

.......................

Feed Bar........................................................................

Feed Bar complete. Nos. 50429C, 68467,

131396 and two 207E

..........................................

Feed Bar Hinge Pin (eccentric)...................................

" " " " Collar with 735C " " " " " Set Screw " " Slide Block

...................................................

..............

...............

" " " '' 134258 with 68495

and 134260

Feed Bar Slide Block Oil Pad (wick)

...........................................................

..........................

" " " " " " Retainer...

" " Wearing Plate

" " " " Screw

..............................................

...............................

" Connecting Rod with 1057C, 68497,

134260 and two 896C..# .....................................

Feed Connecting Rod 131500 with 54025...

" " " Cap Screw..............................

" " " Clamping Screw " " " Oil Pad (wick)

....................

...................

" " n n n Retainer....

" Dog,17 teeth (16 teeth to the Inch)

for 3/32 In. to 1/4 in. gauges, for

131209 and 131210..............................................

Feed Dog,16 teeth (16 teeth to the Inch)

with row of teeth between the needles, for 5/32 In. to 11/32 in.

gauges, for 131211 and 131212...........................

Feed Dog,16 teeth (16 teeth to the Inch)

for 3/8 In. and 13/32 In. gauges,for

131213 and 131214

..............................................

Feed Dog,12 teeth (10 teeth to the Inch)

for 3/16 In.to 3/8 in.gauges, for

131115

..................................................................

PARTS FOR MACHINE No, 147-102

PARTS FOR MACHINE No. 147-102

No. Plate Name

131118 20588 Peed Dog,16 teeth (14 teeth to the Inch)

for 3/8 In. to 1/2 In. gauges, for

131124 and 131215..............................................

157J 20533 Feed Dog Screw, vrfien stationary Needle

Quaixi Is used............................................

50073J 20533 Feed Dog Screw, when movable Needle

Ouard Is used........................................................

50429C 20533 Feed Dog Stop Screw

*54024

..........

" Eccentric with 138306........................................................

............................................................

•23729 ............ " " Body...............................................

51061C 20533 " " "Set Screw...........................

7071 20533 " " Clamping Vasher

...........................

217J 20533 • » ■ n Screw. . . .

138306 20533 " " Lubricating Pad (wood)...

54025 20583 Feed Eccentric (adjustable) complete.

Nos. 1103C, 23729 , 54024 and two

each 217J, 7071 and 51061C................................

1103C 20533 Feed Regulating Screw

131240 20583 " Rocking Frame with two 4530

131398

..........

" " " 131240 with 59343,

..........................................................

..............................

131197 and 131397..............................................

57234 20583 Feed Rocking Frame Hinge Pin.............................................

57235 20533 " " - « Bushing

_____

453C 20562 " " " « „ H

Screw....................................................................

453C 20562 Feed Rocking Frame Hinge Pin Set Screw..

131456 20562 Looper (back) closed eye, for lap seam

falling

...................................................................

131131 20562 Looper (back) closed eye, for general

wcrk......................................................................

Note; Vihen ordering No. 131131 or No. 131458,state

gauge of machine for vhlch required.

4S2C 20562 Looper (back) Set Screw

..........................................................

131459 20562 " (front) closed eye, for lap seam

felling

...................................................................

131132 20562 Looper (front) closed eye, for general

work......................................................................

Note: Vhen ordering No. 131132 or No. 131459,state

gauge of machine for uhlch required.

1120C 20562 Looper (front) Set Screw

54027 20562 " Carrier with two 175E

175E 20562 " " Adjusting Screw 54227 20562 " " Connection 54228 20562 " " " Shaft

.......................................................

....................................

.......................

...........................................

........................

128419 20546 " " " "Oil Pad

(braided cotton)....................................................

68478 20583 Looper Carrier Connection Shaft Sleeve

(eccentric).............................................................

51263D 20546 Looper Carrier Connection Shaft Sleeve

Cap Screw.............................................................

No. Plate Name

68479 20562 Looper Carrier Driver with four 175E....

175E 20562 " " " Cap Screw

...........................

*131110 20583 " Driving Shaft and Feed Lifting

Eccentric with two 64315......................................

Note: When No. 131110 Is required for repairs, the

Arm Rotary Shaft must be returned to the factory

to be adjusted to the new part.

•131111

-------

Looper Driving Shaft and Feed Lifting

Eccentric 131110 with 54027, 54227,

*68483

54228 and 68479

..........

Looper Driving Shaft and Feed Lifting

...................................................

Eccentric Bracket with 761E.................................

948J 20546 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Screw.....................................

68484 20583 Looper Driving Shaft and Feed Lifting

Eccentric Bushing

.................................................

131028 20546 Looper Driving Shaft and Feed Lifting

Eccentric Bushing Oil Plug

...................................

76IE 20530 Looper Driving Shaft and Feed Lifting

Eccentric Bushing Position Screw....

68497 20533 Looper Driving Shaft and Feed Lifting

Eccentric Front Bearing Oil Pad

(wick)....................................................................

64315 20546 Looper Driving Shaft and Feed Lifting

Eccentric Oil Hole Plug.........................................

640E 20546 Looper Driving Shaft and Feed Lifting

Eccentric Screw.....................................................

131052 20562 Looper Holder with 4520 and 1120C

51119J 20546 ' " Screw

....................................................

.....................................

68485 20583 " Throw-out Handle with two 443C...

68486 20546 " " " Plunger

.......................

43503 20546 « . r » Spring. .

4430 20546 " " " SeteScrew

64319 20566 Needle Bar (hollow)

131045

-------

Needle Bar complete, for 3/32 In. to 1/2

................................................................

.........................

in. gauges. Nos. 64319 and 131044...

131291 20581 Needle Bar Bushing (lower)

...................................................

1133E 20582 ™ .. n "Set Screw_____

64320 20581 " " " (upper)..........................................

1133E 20582 . n I. "Set Screw_____

68488 20581 " " Connecting Link and Thread

131399

(upper) Controller

-------

Needle Bar Connecting Link and Thread

.................................................

(upper) Controller 68488 with 68489

and 131400

............................................................

68489 20581 Needle Bar Connecting Link Hinge Stud

(hollow).................................................................

1520J 20566 Needle Bar Connecting Link Hinge Stud

Nut.........................................................................

No.

131270

131400

1492E

131044

131174

131121

68123 54067

54068

54069

131175

54038

217C

1498F

68492

68493

176E

68494

•49169 198E 20546

68495 20533

684Э6 20538

1733 20546

68497 20533

•49191 ..........

68498 20538

661C

853C

176J

Plate 20581

20582

20566

20581

20582

20582 20582

20582

20566 20533 20582 20538

20538 20566 20538

-------

PARTS FOR MACHINE No. 147-102

Name

Needle Bar Connecting Link Hinge Stud

on Pad (wick)

Needle Bar Connecting Link Hinge Stud

Oil Plug Screw......................................................

Needle Bar Connecting Link Hinge Stud

Set Screw..............................................................

Needle Bar Connecting Stud with 211F and

1492E.....................................................................

Needle Bar Connecting Stud Clamping

Screw....................................................................

Needle Clamp with tv® 1498F, Гог 3/32

In. to 1/2 In. gauges..............................................

Needle Guard (пюуаЫе) for 3/lC In. to

3/8 In. gauges

Needle Guard (movable) for 13/32 in. to

1/2 In. gauges

Needle Guard (movable) Clamp

" " (stationary) for 3/32 In.to

5/32 In. gauges......................................................

Needle Guard (stationary) for 3/16 In.to

9/32 in. gauges

Needle Guard (stationary) for 5/16 in.to

3/8 in. gauges

Needle Guard (stationary) for 13/32 in.

to 1/2 In. gauges

Needle Guard (stationary) Holder

" " " " Screw.. " " " Screw

" Set Screw.............................................................

Pin Front Bearing

Oil Pipe (back of arm) Clamp.......................................

" " " " " " Screw " " n в n Connection with

49189, 68495 and two 198E, for oil

ing Feed Rocking Frame Hinge Pin

Back Bearing

Oil Pipe (back of arm) Connection Cap...

It n tt n II П n

Screw....................................................................

Oil Pipe (back of arm) Connection Oil

Pad (wick).............................................................

Oil Pipe (back of arm) Coupling...................................

" " " " " " Nut (brass) " " " " " Oil Pad (wick)...

" " " ' " Sleeve.................................

" " (front of arm) with 131089 and

tw> each 1733 and 49191, for oiling

Looper Driving Shaft and Feed Lift

ing Front Bearing

....................................................

.......................................................

...................................

.....................................................

.......................................................

..........................................

..................

Oil Pipe (back of arm) with 49191 and

68497, for oiling Peed Rocking Hinge

.................................................

.....................

........................................................

.................................................

PARTS FOR MACHINE No. 147-102

No. Plate

131112 20538

Block.....................................................................

68500 20538

131113 20538

131258

131002 20538

131003 20538

131084 20538

•49189

‘131049

•131085

131004 131004

*131066

131087

•131088

1733

131089

68497

*49191

64330 25303

..........

198E 20546

20538

20546 20546 20533 on

____

20542 20546

131084 and 131089, tor oiling Arm Rotary Shaft Front Bearing

Rod........................................................................

68498, 68500, 131112 and 131113

Looper Throw-out Device

131113

131085 and two 198E, for 68500........................

for 131003.............................................................

for 131002.............................................................

for 131084.............................................................

Screw.....................................................................

.................................. " " (left)..

" "

n n n n II к П

131086 with 131088

Oil Lead.................................................................

(brass)

Oil

Pipe (front of arm) Oil Pad (wick) for 68498 and 68500

for 131112 and 131113.

Pre!

131006 20565

1133E

38456

20582 20565

1133E 20582

131401

20565

11173 20565

453C

20562

Screw.

Name

Oil Pipe (front of arm) with 68497 and

131003, for oiling Feed Bar Slide

Oil Pipe (front of arm) with 1733, 49191

...................................

Oil Pipe (front of arm) with 68497 and

131003, for oiling Feed Connecting

Oil Pipe (front of arm) complete. Nos.

Oil Pipe (front of arm) Connection with

131049 and two 198E, for oiling

Oil Pipe (front of arm) Connection with

49189 and two 198E, for 131112 and

..................................................................

Oil Pipe (front of arm) Connection with

Oil Pipe (front of arm) Connection Cap

Oil Pipe (front of arm) Coupllng(center)

..................

Oil Pipe (front of arm) Coupling (right)

...................................................................

Ball, size 1/4 in....................................

Bushing (lower)

" (right).

...........................................

Pipe (front of arm) Coupling Nut

.............................................

" " Set Screw...

" (upper)......................................

" " Set Screw...

Lifting Bracket with 453C...

" ” Guide

" " " Set

.......................

....................................

..................................

...............

PARTS FOR MACHINE No. IA7-I02

PARTS FOR MACHINE No. 147-102 15

No. Plate Name

453C 20562

131402

68184

20542

16IJ 20546

802D 20546

3B467 20542 38468 20565 26276

131158

20565 —

54120

131159

20585

'' " " " Extension.....................................................

" " '' " Hinge Screw.. . " " Spring (flat)

" " " Stud................................................................

” Foot Hinge Pin '' " Plate

Presser Bar Lifting Bracket Set Screw...

" " Lever....................................................

" " '' " Screw. '

......................................................

..................................................................

" Shank

Presser Foot (hinged) complete, for 3/32

felling. Nos. 26276,54120 and 131158

26276

131233 131242 131243

Note: Pre

nlshed Foot Is

20565

20589

specified on order. Presser Foot Hinge Pin

" " Plate..................................................................

sser Foot No. 131159 is regularly fur-

with this machine unless another Presser

Shank................................................

Presser Foot (hinged) complete, for 3/16

In. to 1/2 in. gauges, for lap seam

Nos. 26276, 131233 and 131242..........................

26275

131591

46087

131592

20565 Presser Foot Hinge Pin

" " Plate..................................................................

" " Shank................................................................

20585

Presser Foot (hinged) complete, for 3/32

In. to 13/32 In. gauges, for plain

131591

.................................................................

26276

131593

36030

131594 20588

20565 Presser Foot Hinge Pin

" " Plate..................................................................

.........

'' " Shank

................................................................

Presser Foot (hinged) complete, for 3/8

In. to 1/2 In. gauges, for plain

131593

26276

20565 Presser Foot Hinge Pin

131595

190J

574W

—

20588

20530 20581

20581

131596 131597

1539W

131025 20566

54242 20582

Presser Foot (hinged) complete, for 3/8

Presser Foot Screw

Pressure Regulating Thumb Screw...............................

Slack Thread Controller................................................

" " " Clamp...............................................................

.................................................................

" " Plate..................................................................

" " Shank................................................................

131596

.................................................................

.......................................................

" " .in 1547J

....................................................

.....................................................

In. to 3/8 in. gauges, for lap seam

.................................................

felling work shirts and overalls.

.................................................

stitching. Nos. 26276, 46087 and

.................................................

stitching. Nos. 26276, 36030 and

.................................................

In. to 1/2 In. gauges, for lap seam

felling. Nos. 26276, 131595 and

No.

Plate

190J 20530

131403

20555

131404 20565

17 IE

20565

20566

20565

131405

1423J

131406 2Ô565

217J

20533

131012 20542

20566

69 IF

2102 20565

51570C

20565

50326C 20565

59539

59534 20565 59537

20565

59538 20565

57076

■54070

2102

51570C

32572 54988 54071 54047

37 6J

20565 id0586 20565 20565 20565

20582 20565 20501 20539

54048 20539

624C

20539

68261 20539

131011

20539

316C 20539

20539

50326C

20565

Slack Thread Controller Clamp Screw

..........................

" " Regulator.................................................

" " " Holder..............................

" " " '' Crank with

17 IE......................................................................

Slack Thread Regulator Holder Crank Cap

Screw.....................................................................

Slack Thread Regulator Holder Crank

Name

Clamping Screw

...........................................

Slack Thread Regulator Holder Crank Con

necting Link...........................................................

Slack Thread Regulator Screw.......................................

Tension (under thread) Bracket......................................

" " " " Screw

.................

” " " Disc................................

" " " Regulating Thumb

Nut.........................................................................

Tension (under thread) Screw Stud

" n « .. „ 50326C

................................

with 51570C..........................................................

Tension (under thread) Spring

.......................................

" " " " Bushing

(large)....................................................................

Tension (under thread) Spring Bushing

(small)...................................................................

Tension (under thread) Thread Guide

............................

'' (upper thread) Bracket..........................................

" " " " Screw....

" " " Disc

...............................

" " " Regulating Thumb

Nut.........................................................................

Tension (upper thread) Releasing Disc...

" " " * ' Pin " " ’ " Shaft..

HU**» M

Crank with 624C

...................................................

____

Tension (upper thread) Releasing Shaft

Crank Link.............................................................

Tension (upper thread) Releasing Shaft

Crank Set Screw

....................................................

Tension (upper thread) Releasing Shaft

Spring

....................................................................

Tension (upper thread) Releasing Shaft

Spring Position Plate

.............................................

Tension (upper thread) Releasing Shaft

Stop Screw....................................

........................

Tension (upper thread) Releasing Shaft

Stop Screw Nut......................................................

Tension (upper thread) Screw Stud

................................

PARTS FOR MACHINE No. 147-102

No.

Plate

59539

59535 59537

20581

20565

59538 20565

57076

53225

20565

20539

190J 20530 131407 20539 131408 20582

50438J 20566

1258C

20566

131409 20582

54242 20582

190J 20530 131410 20542

J131411 20542

131412

20582

96oD

190J 20530

32062 20581

131413

20582

50470J 20582

131414

20582

207J 20533

7071

131415

207J

20533

20582

20533

7071 20533

190J

20566 20530 20566

46009

131334

Name

Tension (upper thread) Screw Stud 50326C

with 51570C.........................................................

Tension (upper thread) Spring

......................................

" " " " Bushing

(large)...................................................................

Tension (upper thread) Spring Bushing

(small)..................................................................

Tension (upper thread) Thread Guide

(double)................................................................

Thread (under) Eyelet (back)........................................

'' " Screw

.....................

Take-up with 1258C.....................

" Oil Guard

............................

Screw.. Set Screw. Stripper..

Clamp...

" Screw

Plate...

Bracket

......................................................

....

Thread (under) Take-up Stripper Plate

Bracket 131411 -with 32062 , 50438J, 64242, 131408 to 131410, 131413 to 131415, two each 207J, 7071, 50470J

and four 190J........................................................

Thread (under) Take-up Stripper Plate

Bracket Screw

......................................................

Thread (under) Take-up Stripper Plate

Screw....................................................................

Thread (under) Take-up Stripper Vasher..

" ” " Thread Guard

(fibre)

...................................................................

Thread (under) Take-up Thread Guard

Screw....................................................................

Thread (under) Take-up Thread Guide

(left)......................................................................

Thread (under) Take-up Thread Guide

(left) Screw...........................................................

Thread (under) Take-up Thread Guide

(left) Screw Washer

.............................................

Thread (under) Take-up Thread Guide

(right)

...................................................................

Thread (under) Take-up Thread Guide

(right) Screw

........................................................

Thread (under) Take-up Thread Guide

(rl^t) Screw Washer

Thread (upper) Eyelet

" " " Screw

.............................................

...................................................

....................................

" " Take-up...................................................

No. Plate 54095 20566 68164 20565

1.449J 20566

131335

..........

21 IF 20566

131209 20585

131211 20587

131115 20589

131213 20586

131124 20588

131210 20585

131212 20587

131214 20586

131215 20588

20562

742F

‘15404

15405

Name

Thread (upper) Take-up Plate

" " '' " Spring

........................................

..............

" " " " '' Screw

Thread (upper) Take-up complete. Nos.

1449J, 54095, 68154 and 131334

Thread (upper) Take-up Set Screw

.........................

................................

Throat Plate,for 3/32 in. to 1/4 In.

gauges, for 131032, for lap aeam

felling....................................................................

Throat Plate, for 5/32 In. to 11/32 in.

gauges, for 131321, for lap seam

felling....................................................................

Throat Plate, for 1/4 In. to 3/8 In.

gauges, for 131241, for lap seam felling, for making longer stitch than regular

...........................................................

Throat Plate, for 3/8 in. and 13/32 In.

gauges, for 131093, for lap seam

felling....................................................................

Throat Plate, for 3/8 in. to 1/2 In.

gauges, for 131118, for lap seam

felling....................................................................

Throat Plate, for 3/32 in. to 1/4 In.

gauges, for 131032,for plain stitch ing

.........................................................................

Tl-.roat Plate, for 5/32 in. to 11/32 in.

gauges, for 131321,for plain stitch

ing ........................................................................

Throat Plate, for 3/8 In. and 13/32 in.

gauges, for 131093,for plain stitch

ing.........................................................................

Throat Plate, for 3/8 In. to 1/2 In.

gauges, for 131118,fftf plain stitch

ing.........................................................................

Throat Plate Screw.........................................................

Trade №rk......................................................................

” Rivet.......................................................

PARTS FOR MACHINE No. 147-103

MACHINE No. 147-103

For Lap Seam Felling Side Seams on Medium and Medium Heavy Pants, Overalls and Automobile Seat Covers. Two needles, two loopers. Gauges 3/32 inch to 1/2 inch. Ball bearing. Needle

bar stroke I 3/8 inches. The loopers are arranged so that they

may be thrown out of position for convenience in threading. An

improved oiling system automatically oils all of the principal bearings of the machine. Speed 3800 R. P. M.

NOTE: THIS MACHINE IS THE SAME AS THE 147-102

MACHINE WITH THE FOLLOWING EXCEPTIONS:

No.

131072 20566

131510

68459

131529

•131579 131580

131292 20581

•131231

•131232 4604

131196

131545 128390

131547 131548 131549

26276

131534

Plate

20590

20581

20581 20581

665J 20561

20565

Arm Rock Shaft Crank (back) ball bearing

Name

solid, with twD 50083C, in place of

131486..................................................................

Arm Rotary Shaft 131487 with 640E, 684.59

131111 and 131502,in place of 131488

Crank Connecting Rod 131471 with 131072,

in place of 131489

...............................................

Feed Dog, 14 teeth (10 teeth to the Inch)

for 1/4 in. to 3/8 In. gauges, for 131536

.................................................................

Looper Holder Body.....................................................

" 131579 with 4.52C and

1120C, in place of 131052

...................................

Presser Bar Bushing (lower) in. place of

131006..................................................................

Presser Bar Spring (auxiliary).......................................

" Guide

............

" " Rivet.

Presser Bar Spring (auxiliary) complete.

Nos. 4604, 131231 and 131232

............................

Presser Foot Plate..........................................................

” Hinge Stud.................................

Position

Screw

....................................................................

Presser Foot Shank........................................................

Yielding Heel....................................

Connection...

'' " Hinge

Pin.........................................................................

Presser Foot Yielding Heel Connection

Spring....................................................................

No. Plate

26276 20565

131550 20590

131536 20590

Company’s Trade Mark "SIMANCO.**"i

Name

Presser Foot Yielding Heel Hinge Pin... .

Presser Foot (triple hinged) complete,

for 3/16 in. to 3/8 in. gauges. Nos.

131534, 131546 to 131549 and two

each 665J, 26276 and 128390...............................

Throat Plate, for 1/4 In. to 3/8 In.

gauges, for 131529................................................

SINGER Needles should be used

in SINGER Mach ines

These Needles and their Containers

are marked with the

Needles in Containers marked

■'FOR SINGER MACHINES"

are NOT SINGER made needles.

UJ \jt

2 zi T ^

L) "t < i

CN ^ O -

O Z

ll Zi

t/> UJ

0 ll

z <

h- LTi

a) i u) o> u) rH 1 f-

t'J

r-i

f-i 1 <—i ri • i n

^L) 1 UJ T' uy r-t t O' -r 1 .-1 1 lO r- tw i a» 04 t

r i 1 ri r 1 i-i t r-i r-i ri ^ ^

Ifl

r-i

D 1 U) Oi uJ r-( 1 1- V 1

C-

iO m Ur ^ uj ri Ci [-

r< O) d) dj 0- OJ dj O) td r-l

r i U rf KT ri ri r-i iii ri ^ i

ri ri ri .-i \ rl r-i , i , i ri

Pi pj P> Pi PJ P. P. p. P4 P.

. 1 ,-5 r i r-4 r1 rd

r-i f-i

r 1 rl r-l rd r-l f-1 f

1 04 dJ

1 ^1 r-l r-l y

> 04 dj dJ

1 Pj Pr P, d; P4 P) !

1 1 O4 11; dr <D 0- lO

04 Ki

1 P4 y

1 r 1 1 -1 r-l y ( 1-1 1 p; Pj P. 1/4 Pr Pr

tw r-l lO № ilj y O) P) Or iIJ dr lU f- dJ

•«J*

r 1 r^l f 1 rd ,1,1

04 .-t CO Ch UJ y Oh PI 04 dr UJ u) o n 0 Pr y y C . r 1 ,1

,-4 rl r 1 r-l y r 1 r-l

^. 1 (L) Cl a; y 0*

Pr id I.r dr

iJ PJ 'r y 0 r 1 rl

r r 1 . 1 f-1 ^ rd r-H

OJ f 1 OJ 0 . I 1 Ch PJ 04 U3 dr Ur 1 .I'r

0 P J y y 1 ) t r-l

r d r-1 r 1 Pi y 1 rd P. PJ PJ P.i iij 1 Pj

r r^ r r ^ r-1

OJ 1 to Ol O 1 OJ PJ 1 lO dr UJ 1 dJ

tj 1 y y U 1 pd r 1 1 rH fd y 1 pi P. 1 (O PJ dJ 1 . 1 1 pi pl 1 r-l

04 1 OJ Ch t- 1 0 PJ 1 lO lO ID 1 dr

0 * y y l.J 1 rd

r-l I r—1 Pl y 1 pl PJ 1 PJ PJ .0 1 PJ r 1 1 rl Pl 1 pl

’i'

'f , i > i

r-i f-i r i

1 O) dl dj I" lO

r-l .-i y* ,1 f-i «-

OiJ U) 01 y CJ>

<ii <D

ri ri

K) i-

oj <Ti u: y (T>

OJ r-t <-•*

iO c-

1 d > r-1 1

1 lO 1 1

.-i r-< 1

1 f—i r4 1

r d pd

OJ r 1

r-i r-i i

1 rH

0 r-t

PJ ~J

6h r-l

0 r-l

' ’ 4

0 r- 1

0 r 1

P) PJ

O) 1

O'. 1

1 Pl

1 r-i

U 1

0 1

1 lO d.' 0- CO 1 C- '.M 1

1 Pi pj 1-; P. 1 PJ PI i

1 t') PJ rj P, 1 PJ P) 1

1 d. dj t" c J i a- 04 1

1 ,H r-H , -1 t

Ui P4 oj o> O) -y a> t-

r-i

1 1 a) oi CTi y O)

r-i

♦

FITTINGS

FOR MACHINE 147-103

FOR SEAVING MEDIUM AND MEDIUM EtEAVY PANTS

. I', L' 0~i

-J’ pt

r-l

< r-i C\J (X ^ I.\j

i KJ pV <£> oi

- •-< rH O

0 z

ZL u

♦

z <

I C) --1

I ,

t' j I" v.‘\)(T)CI>-

r-i f -t .--i r i r-\ r

p. Pi

Pi Pi

r-i M 'H r H rH >-

r- i Ui

i v.

> 4-

o c

No. Plate Name

131466 20592 Cloth Plate...............................................................................

131467

-------

Cloth Plate complete, for Throat Plate

with 9/64 in. offset. Nos. 131.051,

131386 and 131466...............................................

131537 20591 Feed Dog, 19 teeth (10 teeth to the inch)

for 3/16 In. to 1/4 In. gauges, for 131543

..................................................................

131538

128390

-------

Presser Foot Plate

..........

" " " Hinge Stud

...................................................................

.................................

66v5J 20581 " " " " " Position

Screw.....................................................................

131539 131540 " " Yielding Heel

-------

Presser Foot Shank.................................................................

..............................

131541 ” " " " Connection...

13055

..........

" " " " " Hinge

Pin.........................................................................

27114

-------

Presser Foot Yielding Heel Connection

Spr Ing...................................................................

18055 Presser Foot Yielding Heel Hinge Pin....

131542 20591 Presser Foot (triple hinged) complete,

for 3/16 In. to 1/4 In. gauges. Nos. 27114, 131538 to 131541 and two each 665J, 18055 and 128390

.......................................

131543 20591 Throat Plate, for 3/16 in. tc 1/4 in.

gauges, for 131537................................................

*-> a

a >

.5; F TJ XJ *0 L 4)

0 0 f. 1. 0 0 *> 4-» « (. UJ OS 0 C

— (,•) 0 a. 0

ifl

Ur—

L L tr C « C *-< 4J

cojrHrdniniea X) X) O. r*, xJ x3 « «00 a>®004)®®4JHE. ®<lrQ04r®Erf. XirLj U, ll, 4-J V. A. C, El Cl

Q O L t.

Q n fc. Ih ti Ci 4) 11 *1 4->

11 11 r-« /--( m o, uJ ffl

TJ XJ CLtJ T3 n n O O

®l>OOiii'LtiDt, L.

® ® Q o ® ® f. i. j.. x;

li, ,1. ,1 ►J z CL u, L< F<

LAP SEAM FELLER

ACCESSORIES

No.

120344 20545

12 03 .4 5

120440 20545

121108 120341

4822

8908

Plate

20545

20545 20545 20545 20545

Oiler (copper plated) with 120345.

" Spout, 4-1/2 in. long.................................

Screw Driver (large)

" '' (small)

Tweezers (curved)

Wrench for 1547

" " 1520.........................................

Name

........................................

.........................................

...........................................

..............................................

BELT GUARD

No. Plate Name

68222 20549 Belt Guard with two wood screws 1 In.No.

12.................................................

BENCH STAND

No.

79772

126849

27998

126247

126248

41538

60656

Plate

9520

Name

Bench Stand with 27993, tw each 41538,

126849, three wood screws 1-1/4 In. No. 12, four each 60656, vood screws 1-1/4 In. No. 10 and sixteen wood screws 5/8 in. No. 7

Flap Hinge with four vcod screws 3/4 In.

No. 7.....................................................................

Flap Hook and Eye (brass) with wood

screw 1/2 In. No. 5...............................................

Flush Bolt

Flush Bolt with Plate complete. Nos.

Hinge

.....................................................................

" " Plate............................................................

126247, 126248 and four brass wood

screws 5/8 In. No. 4

............................................................................

.............................................

LAP SEAM FELLER

No. Plate Name

121438 20593 Lap Seam Feller (adjustable) on Shank,

for sleeving,for medium heavy and

heavy-weight material, for 147-102

No. Plate

121440 20593

1499J 20593

material, for 147-103 Machine

Lap Seam Feller Screw..................................................

Name

Lap Seam Feller (adjustable) on Shank,

for medium heavy and heavy-weight

.............................

FOOT LIFTER PARTS

No.

6439

4879

5686^

56865

126249 20549 Treadle

4882 126250 20547 150451 20549 150452 20549 Treadle complete. Nos. 4879, 4882,126249

Plate

Chain, 36 In. to 45 In., with 56884

56865............................................................

qulred

20545 Chain Connecting Link

20545 " Hook (large)...........................

20545

20547

Note; When ordering No. 6439, state length

" " (small)

..................................................................

" Shaft " Spring

" Stand............................................................

126250, 150451 and two wood screws 1

In. No. 16..............................................................

Name

.........................................

.........................................................

............................................................

..........................................................

KNEE LIFTER PARTS

No. Plate

37563

56864 20545 56865 20545

2763

12242 20.592

6335 20592

6336

2766 20592

2767

6337 20592 7125

2770 20592

20592

35 6C 20546

20592

356C 20546

20592 356C 20546 356C 20546

—

Chain, length 15 In., with 56864 and

56865....................................................................

" Hook (large)

" " (small)........................................................

Rock Shaft......................................................................

" " Hanger with two wood screws 1

In. No. 10..............................................................

Rock Shaft Knee Arm....................................................

Rock Shaft Knee Arm complete. Nos. 2766,

2767 and 6335.......................................................

Rock Shaft Knee Arm Hub with 356C

" " " “ " Set Screw

" " " Plate with 3560................................

' " " " 3g(- Screw......................

" " Lifting Bracket with two 356C " " " ” Hook " " " " " Set Screw

" " " " Set Screw... .

" " Stop Dog with 356C

Name

...........................................................

..........................

....................................

and

re-

....................

+ 27 hidden pages