SINGER 144W202 User Manual

'ip

«♦■•S'"

JM.W

mm

&

Perm 2626w

( UO )

Prinled in U. S. A.

LIST

OF

PARTS

mu

SiS#'>

fe^‘

,1^1 Is:

F^^i: -n.

wm

MACHINE No. I44w202

THE SINGER MANUFACTURING COMPANY

INDEX

Page

Acceasorles ..................................................................................................... 16

Copyright, U. S. - A., 1939 and 1940

by The Singer Manufacturing Co.

Bobbin Winder

Foot Lifter and Starting Treadle ..................................................................... 17

Machine No.l44w202 ...................................................................................... 5

Numerical List of Parts ................................................................................... 19

...............................................................................................

16

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the PART number In

the FIRST column.

The number stamped on a Sewing Michlne Part Is the num

ber of the Single Part only, except when the part Includes Set Screws, Clamping Screws, Studs and Rollers Spun on. Small Wires riveted, or Parts soldered together, etc.,which

It Is necessary to furnish In combination.

Every combination of parts sent out has Its specific

number which, although not stamped on Parts (except in

above case), must be used when ordering the combination.

Each number always Indicates the SAflE PART In whatever

list It appears, or for whatever Michlne.

The letters after some of the numbers Indicate the

style of finish only, as follows:

LIST OF PARTS COMPLETE

FOR

A. Hardened, Polished, Nickel Plated and Buffed. B. Polished, Nickel Plated and Buffed. C. Hardened only. D. Polished only. E. Soft, not polished. E. Hardened and Polished. H. Blued. J. Nickel Plated only. R. Merllzed. X. Black Oxide.

XC. Hardened and Black Oxide.

Y. Blade Nickel only.

These letters MUST BE USED when they appear In the list

and AFTER the number, as In the list.

In this series: 200001-to 201500 and 350001 to 351500 are Screw Numbers. 201501 to 201800 and 351501 to 351800 are Nut Numbers. 201801 to 202000 and 351801 to 352000 are Roller Numbers. 202001 to 350000 are Numbers of Machine Parts.

The figures In the second column refer only to the

plate In which the Illustration of the part Is shown and

are NOT TO BE USED In ordering.

Two or more numbers over a cut Indicate that the dif ference between such parts Is not visible In an Illustra tion.

Parts marked with an asterisk (*) are furnished when repairs are made at the factory.

MACHINE No. I44w202

Single Needle Lock Stitch Machine with Compound

Feed and High Lift Alternating Pressers.

For Stitching Pockets in Automobile Door Panels

and Tarpaulins, Awnings and Similar Work.

Has a high arm with a working space of 20 inches

to the right of the needle.

No.

Plate

»264639

224002 20027RH 16137 202240 16137 265003

16137 16131 161,31

16140 200166H 16140 265073> 16140 265074 202260 200383C 200383C

265075

16140

16140 16140 16140 16140

201220C 16140 200382C 16140

Arm with two 240174

Cap

Cover

Cross Shaft

201220C

Ai-m Cross Shaft Gear Position Screw

" " " " Set Screw

N;une

" Screw " '' Washer

" Screw (2)

Bushing with 202260

" Oil Packing (wick) " Set Screw " " " Check Screw

Gear with 200382C and

No.

350419H

8702

50708E 264697 264641 202244

200071E 265048 202260 200338C 207080 202244 200502B

200338C 264602 224104

200602E

200327C

202253 16124

264503

2003980'

200383C

224139 200164B

224392 20a357E 16137

265005 265006 200077D 265059

2000390 16137

*264698

264644 200194E 202258 16141 200570E 16141

54897

Plate 16140 16141

16141 16137 16137 16137

16137 16137 16137 16137 16137 16137 16137

16137 16124 16124

16124

16138

16138 16138

16137

16140 16140 16140 16137

16138 16138

16138

PARTS FOR MACHINE No. \l^Ц^202

Name

Arm Cross Shaft Gear Afljustlnp; Screw

Position Pin (2) Screw (4)

Shaft with 200357E and 224392

Bushing (back) with 202244

(wick)

Arm Shaft Bushing (back) Screw (3)

0 M It It It It

Screw

Arm Shaft Bushing (front) Set Screw

" " " Pulley with

20a327C,200602E and two 202253

Arm Shaft Connection Belt Pulley Posi

tion Screw

Arm Shaft Connection Belt ihilley Set

Screw

Arm Shaft Connection Belt Pulley Spring

Flange

Arm Shaft Connection Belt Timing Collar

with 200383C and 200398C

Arm Shaft Connection Belt Timing Collar

Position Screw

Arm Shaft Connection Belt Timing Collar

Set Screw

Arm Shaft Connection Belt Timing Plate

H II II 11 II „

Screw (2)

Arm Shaft Oil Packing (wick)

" Side Cover " " " Gasket

Balance Wheel (belt groove 6-3/4 In.

dlam.) with two 200039C Balance Wheel Set Screw Bed

Block (for Hook Saddle)

...............................................Screw (2)

Hinge Connection (2)

" " " Screw (4) " on Cup

" " Oil Packing

(center) with 202260

" " Oil Packing (wick)

" Set Screw

(front) with 202244

Connection Belt

Stop Screw

'' Screw (3)

Oil Packing (wick)

Thumb

No.

264603

2215811

223812 264604 264645

*265086

264647

*202056

264648 264649

264650 265066 265087

201349C

201542C

203101

265088

202277

200403C

200387C

248251

200118D

265089 200983F

200597F 265090

265318 202135 200533B

264633

264634 200396C 200363C 350393C

201518E

264687

PARTS FOR MACHINE No. I44w202

Plate

16141 16141 16141 16141

16127

16127 16127 16128

16128

16128 16128 16127 16127

16127 16127

15141 16141

16141 16139 16139 16139 16139

16139 16139 16134

Bed Slide (back) " " " Stop " " " " Spring

Bobbin

” Case " " Latch " " " Pin " " " Plunger

" " " Spring " " Oiling Felt

" " " Lever with 201349C, 201542C

and 203101

Bobbin Case Opener Lever Driving Screw

Stud

Bobbin Case Opener Lever Driving Screw

Stud Nut

Bobbin Case Opener Lever Driving Screw

Stud on Packing (wick)

Bobbin Case Opener Lever Hinge Stud with

202277

Bobbin Case Opener Lever Hinge Stud Oil

Packing (wick)

Bobbin Case Opener Lever Hinge Stud Set

Screw

Bobbin Case Opener Lever Hinge Stud Set

Screw Check Screw

Bobbin Case Opener Lever Link

" " " Screw

" " Tension Spring

" " " " Regulating

Screw Bobbin Case Tension Spring Screw Bobbin Case complete,Nos.200597F,200983F

202056,264647 to 264650,265086 and

265089

Face Plate

" " Position Pin " " Thumb Screw

Feed Bar

" " Crank with 200363C and 200396C " " " Position Screw

" " " Set Screw " " Hinge Screw (driving) " " " " Nut

" Dog,38 elongated needle hole,for

Name

" " (front)

" " Opener

needle sizes 25 and 26

PARTS FOR MACHINE No. I44w202

No.

265100

201491E 2646S5

201171C 201517E 202277

202330

200049D 237521

237043

224108

200437C

200383C

200256C

202301

237523

200607C

200256C

201525E

200429C 200383C

264636 223652 200019E 202625

200383C

224154

Plate Namp 16134

16134 16124

16124 16124 16124

16124

16124 16124 16124

16124

16124 16124

16139 16139 16139 16139

16139

16138

Feed Dog Screw (2)

Feed Driving Connection Hinge Screw

11 1' It II II .

Feed Driving Connection Oil Packing

Feed Driving Connection Pinch Screw

” " 11 II II

Feed Driving Eccentric Regul-atlng Brack-

Feed Driving Eccentric Regulating Brack-

et Hinge Screw Nut

Feed Driving Eccentric Regulating Brack-

et Plunger

Feed Driving Eccentric Regulating Brack-

et Plunger Spring

Feed Driving Eccentric Regulating Brack-

et Plunger Spring Stop Screw

Feed Driving Eccentric Regulating Brack-

et Stop Screw

Feed Driving Eccentric Regulating Brack-

et Stop Screw Nut

" " " ” "

Check Screw 200917C

Feed Driving Rock Shaft

" " " " Crank with 200019E

two 200383C (2)

Screw

Feed Lifting Cam with 201220C

Feed Dog,30 needle hole,for needle size 27,for use with thread larger than No. 12

Driving Connection with 200049D and

202330

Packing (wick)

(wick)

237521 wltli 224100, two each 200256C

and 201525F

et Flange with 200383C and 200437C

et Flange Position Screw

et Flange Set Screw

et Hinge Screw

Feed Driving Eccentric Regulating Screw

Feed Driving Rock Shaft Stop Collar Set Screw

liut

" " " " " oil

Eccentric Re.giilatlng Bracket

" " " " Pinch Screw

Stop Collar with

No.

264637

350197E

225837 223655

20017SD

201220C

264696

»264657

202443. 202619 26460G 265012

20035.se 16141

264699 227224

201052C

265014

201052C

265015 227116

265027

20105SC

264518

264519 200268F 265067 265068 265069 2646B9

200917C 200382C

200382C 200382C

265070 232719 265071

Plate 16139

16139 16139

16139 16139 16138 16137

16137 16137 16141 16141

16141 16141

16141

16141 1G141

16141

16141 16141 16140 16140 16140 16137

16137 16137

16140 16140 16140

Name

Feed Lifting Cam Fork with 200173D and

223655

Feed Lifting Cam Fork Screw

" " " " " Washer " " " Oiling Felt

" " " " " Screw " " " Set Screw " Regulating Spindle with 202443,

202619 and 264657

Feed Regulating Spindle Head

" " " " Pin " " " " Position Pin

Foot Lifter Lifting Lever with 264518

„ „ „ .. .. ..

Screw

Foot Lifter Lifting Lever Latch

" " " " " Collar

with 201052C

Foot Lifter Lifting Lever Latch Collar

Set Screw

Foot Lifter Lifting Lever Uatch Handle

wlth two 201052C

Foot Lifter Lifting Lever Latch Handle

Set Screw

Foot Lifter Lifting Lever Latch Spring

Justing Collar

Foot Lifter Lifting Lever Latch Spring

Adjusting Collar 227116 with 201052C

Foot Lifter Lifting Lever Latch Spring

Adjusting Collar Set Screw

Foot Lifter Lifting Lever Pin

" " " " Gprlm.;

'' " " " " Screw

Hand Wlieel

" " Disengaging Spring

” " Driving Gear with 200382C and

Hand Wheel Driving Ge.ar Position Screw

II II II II II <1

Check Screw

Hand Wheel Driving Gear Set Screw

" " " " " " Check

Hand Wheel Engaging Collar

" " " " Pin " " " Plate

" " '' " Hinge Stud

M „ .. 1. .. .1

" " '' " Plunger

10

PARTS FOR MACHINE No. I44w202

11

No. 200577XC 201054F 265072

#265091

265092

265093 16127

224019 16128 200364C 16128 265094 16128 200446C 16128 " " " Position Screw

265053 16138 " Driving Gear (spiral) with 200362C

201254C 16138 Hook Driving Gear Position Screw 200362C 16138 240167

2012200 16128

200382C

224022 264700 16138 " " Shaft 224111

202244

237529

200363C 16138

200383C

265043

200354C

200362C 16138

265044

248423 265045 248425 265046

265095 265096 201253F 265097

Plate 16140 Hand Wheel Engaging Plate Screw 200583H 16140 " " Screw 223850 16128 16140 Hand Wheel complete,Nos.201054F,232719,

16127

16128

16128 " " " Set Screw 16128 " " " Thrust Washer

16138

16138 ” " " " " " Check

16138

16138 16138 " " " " " Spring 200388C 16138

16127 16127 16127 16127

265067,265070,265071,265073 to 265075

four 200577XC 20а363С 16138 " " " Set Screw

Hook

" 265091 with 265095 to 265097, t\«

200583H and four 201253F

Hook and Bobbin Case complete,Nos.265090

and 265092 265099

Hook Bushing (lower) (bronze)

" " " Set Screw

" " (upper) (bronze)

and 201254C

'' " " Set Screw

and 201220C

Hook Driving Pinion Position Screw

" " " Bushing (back) with

202244

Hook Driving Shaft Bushing (back) Oil

Packing (wick)

Hook Driving Shaft Bushing (front)

Screw (2) 240174 16137 Lifting Rock Shaft Bushing

Hook Driving Shaft Lock Ratchet with

200354C and 200352C

Hook Driving Shaft Lock Ratchet Posi

tion Screw 264667

Hook Driving Shaft Lock Ratchet Set

Screw

Hook Driving Shaft Lock Stud Packing (wick)

" " " " " Socket

Hook Gib Section (long)

" '' " (short) 202330 " '' " Screw " Needle Guard

Name No. Plate Name

350419H,three each 265068,265069 and

" " Pinion (spiral) with 200382C

" " ’’ " Set Screw (2)

" " '' " " Cotter Pin

Hook Driving Shaft Lock Stud complete.

Nos.248423,248425,265044 and 265045

16127

265098

223681

2003.83C 200009E 16120 " " Pinch Screw 200006E

225585 16128 " " " Washer

26460? 16137

200996C 16137 264608 161.37

350172C

201524E 264609 16137

- 264610 16137 240171

248821 16137

200029E 161.37

200398C 16137 200382C 16137 " " Set Screw 264611 200074F 264615

264616

264617

222598

200374C 16130 Needle Bar Connecting Link Stud Set

265054

; 200086C

16128

16138 Hook Saddle Bearing

16138 " " ...............................................Check Screw

16120

16128 Hook Saddle complete,Nos.200118D,200387C

16137 " " " " Screw Stud 16137

16137

16131 16131 16137

16130

16130 16130 " " " " Stud with

16130

16130 Needle Bar Connecting Link Stud Set

16130

16130 Needle Bar Connecting Stud Oil Packing

16130

Hook Needle Guard Screw

" Saddle with 200009E " " 223850 with 200364C,200446C,

22^1019 and 265094

" " Screw

20Cki03C, 224022,240167, 248251,265066, 265087,265088,265093 and 265098

Lifting Bell Crank

" " Cap Screw

...........................

" " " " " " Nut

" Eccentric with 200382C and 200398C " " Connection " " " Crank with 200029E and 248821

Lifting Eccentric Connection Crank Oil

Packing (wick)

Lifting Eccentric Connection Crank Pinch

Screw

Lifting Eccentric Position Screw

" Presser Foot

" '' " Screw

" Rock Shaft with 201524E and

3.50172C

Needle Bar with 200112F,200583H and 264623

Needle Bar Connecting Link

222598

Needle Bar Connecting Link Stud Oil

Screw

Needle Bar Connecting Stud with 202330

and two 200086C

(wick)

Needle Bar Connecting Stud Pinch Screw

Link

12

No.

264619

203172 200428C 200383C

200335C 200383C 264620

210910

202277

2003630

200363C

202666 200098F 16130

264622 16137

223692 16137

264638 16124

200833C 16124

' 201522E

). 202277

1 200029E

1 \ 202668

1 210920

'f

: 201141C

200387C

264623

200Б83Н

200112F 264690 241535

207072

200352C

264625

PARTS FOR MACHINE No. I44w202

Plate 16130

16130

16130 16130

16130 16130 16130 16130

16130

Needle Bar Crank with 2003.30C,200374C,

2оа388С,200423С and 264667

Needle Bar Crank Friction Washer

" " " Position Pcreiv ” " " " " Check

Screw

Needle Bar Crank Set Screw

" " " " " Check Screw " " Rock Frame

" " " " Hlnse Stud with

202277

Needle Bar Rock Frame Hlnce Stud Oil

Packing (wick)

16130

16124

Needle Bar Rock Frame Hinge Stud Set

Screw

Needle Bar Rock Frame Hinge Stud Set

Screw Check Screw

Needle Bar Rock Frame Position Bracket

Screw

Needle Bar Rock Fr;vrae Rock Shaft with

200387C and 210920

Needle Bar Rock Frame Rock Shaft Crank

with 200029E

Needle Bar Rock Frame Rock Shaft Crank

Connection with 202277

Needle Bar Rock Frame Rock Shaft Crank

Connection Hinge Screw

Needle Bar Rock Frame Rock Shaft Crank

Connection Hinge Screw №it

16124

16137

16137 16137

16137

16130 16130 16130

16131 16131

Needle Bar Rock Frame Rock Shaft Crank

Connection Oil Packing (wick)

Needle Bar Rock Frame Rock Shaft Crank

Pinch Screw

Needle Bar Rock Frame Slide Block

" " " " " " 202668

with 201141C

Needle Bar Rock Frame Slide Block Screw

Stud

Needle Bar Rock Frame Slide Block Screw

Stud Set Screw

Needle Bar Thread Guide

" " " " Screw " Set Screw

Presser Bar with 200074F

" ” Bushing (lower)

16131 16131

16131

" " " (upper) " " " Set Screw (2) " " Lifting Bracket with 2000S2E

Name

No. 200975F 200032E 264626 264627

200086F 16131

T

i

1

1 1 225004

i

i-

i

1

j i

i

[

i к

5 !.

ь

200352C

265060

240172

210949

200006C

3.503G1C 200224H

2G5032

201254C

265056 265050

3504330

265041

2009620

200053C

265026

202253

265057 265052 265051 265042

264628 264629 202277

202400

202423

200363C

264674

Plate 16131 16131

16131 1613,1

16131 16141

16141

151.31 16131 16141 16141 16141

16138

161.-;-8 16138

16138

16138 16138

16136

16138

161.38

161.^8 1G138

161,30 16130

16130

IGISO 16132

PARTS FOR MACHINE No. I44w202

fiame

Presser B;ar Lifting Bracket Guide Screw

" " " " Pinch Screw " " Position Guide

" " " " Lever with

20008GF

Presser Bar Position Guide Lever Pinch

Screw

Pi'e.aser Bar Position Guide Set Screw

’’ " Spring (auKllIary) " '' ■’ (flat)

" " " Bracket with 200086C " " " " Pinch Screiv " ” " Regulating Screw " " " Supi>ort Screw " " " " " W.asher

Safety Clutch Hook Driving Sh.aft Posi

tion Collar with two 801254C

Safety Clutch Hook Driving Shaft Posi

tion Collar Set Screw

Safety Clutch Locking Lever

” ” " " Connecting

Link

Safety Clutch lacking Lever Hinge Screw

" " " " Spring (for

heavy duty)

Safety Clutch Locking Lever Spring Ad

justing Screw

Safety Clutch Locking Lever Spring Screw

" " Pulley with 200962C and

202253

Safety Clutch Pulley Spring Flange

" " Throvj-ln loitch " " " " Pin

" " '' " Spring

Safety Clutch (for heavy duty) complete.

Nos.200053C,2G5032,265036,265041, 265050 to 265052,265056,265057 and

3504.33C

Take-up Lever

" " Driving Stud vMth 202277 " " " " Oil Packing

(wick)

Take-up Lever Hinge Stud vjlth 202423

" " " " Oil Packing

(wick)

Take-up Lever Hinge Stud Set .Screw Tension Bracket with 2000610,2,38009 and

350392C

14

No.

II

1

200159F

32572 264675 16132 238089 16132

' 'ч

■'■3

264676 200309E 16132 264695 16132

Ч

• ,4 350392C 16132

223438

■ ' 1560C 16132 264677 16132

264678 16132 Thread Controller Disc

265076 16132 " " Spring 265331 16132 " " " (heavy) for use with

2C5077 16132 Thread Controller Spring Stop 200132E 16132 ’’ " " '' Screw 264681 16132 '' " " Stud with 201052C 200061C 16132 " " “ " Set Screw 264682 16132 " " Stud 201052C 16132 " " " Set Screw 264683 16132 " " Thread Guide 201535E 16132 " " " " Nut 202412 16132 " Guide 264685 16132 " " (lower) 264684 16132 " " (upper) 2OO503H 16132 " " Scre\j 236955 16140 " Lubricating Cup with 200059C and

236957 16140 Thread Lubricating Cup Oil Pad (felt) 236959 16140 " " " " " (upper)

201280C 16140 Thread Lubricating Cup Oil Pad (upper)

222712 16140 Thread Lubricating Cup Oil Pad (upper)

201572B 16140 Thread Lubricating Cup Oil Pad (upper)

236961 16140 Thread Lubricating Cup Oil Pad (upper)

200059C 16140 Thread Lubricating Cup Set Screw 236962 16140 " " " Thread Guide 236963 16140 Thread Lubricating Cup complete,Nos.

2102

Plate 16132 16132 16132

16131

16132

PARTS FOR MACHINE No, I44w202

Name

Tension Bracket Screw (2)

II

Disc

II

Release Disc

tl

" Lever

II

" " Guide Pin

II

II II

II

Tension Bracket complete,No

200132E, 200?09E, 2015.?T^F, 20467''

264675,264676,264081 to 204085,264695 265076,265077,two 2102 and four 200583H

thread larger than No. 12,

201280C

Reinforcing Plate

Tension Screw Stud

Tension Spring

Tension Thumb Nut

complete,Nos.236957 and 236959

201572B,222712,236955,236961,236962 and three 236957

" " Rod

" Screw

" Plunger

Spring

Stud

Thumb Nut

No. 210956 2,65335

200126F

200583H

210993

2,23844 210957 210958

200397H

2,10959

264693

2,64630 2,64631

Plate 16132 Thread Retainer Bracket with 200397H 16132

16132 16132 " " Screw (2) 16132 16132 16132 16132 " " " Collar

16132. 16132

16134 16134

742F

161.30

16137 2,02,277 16130 264614 16130

264613

16130

200086F 16130

PARTS FOR MACHINE No, I44w202 15

й''"-

г.;:',

Name

- . ’ '' " " Arm " " " " Screw (2)

■‘i л|

■ ■

" " Sleeve ■■V;-

" " Spring " " Stud

" " " Set Screw

Vi

'T

i

Thread Retainer complete,Nos.210956 to

210958,210993 and 223844

Tliroat Plate

Scre\-i (2)

Vibrating Presser Bar

" " " Connecting Link " " " Oil Packing (wick) '' " Foot,30 needle hole,with

200086F,for 264611

Vibrating Presser Foot,2’’ needle hole,

with 200006F,for 264611,for use with

thread larger than No.12

Vibrating Presser Foot Pinch Screw

f-l