How it Works
SINGER
Loading...
120U
Instruction Manual
16 pgs1.65 Mb0
User Manual
7 pgs1.07 Mb0
User Manual
9 pgs197.41 Kb0

SINGER 120U User Manual

Download
Page 1
SINGER
120U
Page 2
FORM U245
(573)
MACHINE PARTS CHART
for

SINGER

120u

•k A Trademark of THE SINGER COMPANY
Copyright I? 1973 THE SINGER COMPANY All Rights Reserved Throughout the World
Page 3
Page 4
Page 5
331 « 546930
PARTS PDR I20UI3 MACHINE
WHICH DIFFER FROM I 20U3 MACHINE
505637

ACCESSORIES AND ATTACHMENTS

-504119
%
Y
545840
504099
545932
i)®
549231
14041 I
540525
545935
540546
127318
5041 14
© \
49057
505646 —I
r
505645
505638
504113
143327
CAT.2270
332
Y
504071
45753
/'
545827
545825
545047
545829
--
"^^505001
545033
540437
545777
a'
, I u
■u / \
r! \
545047
545776
505655(001)

MACHINE BASE AND OIL RESERVOIR

540500
545938
540471

KNEE LIFTER PARTS

545915
A
_______
545062
V
545922
545062
545913
545912
545405-1
54506) -I
»545914
/
^ 545915
545921
545064
545923
—A
__
545918 545917
Qi.
504)05
, 545919
545062
504105
505402
Page 6
NUMERICAL LIST OF PARTS FOR MACHINE 120U3
PART NO.
(805)
229
691 (850)
29852 32390
32758 A039A
(809)
50169 52033 52171 52239 52454
55623 125314 140411 (802) 143042 143056 143056 143236
143236 146610 149031 149111 (701) 154781 (850) 154781
(850) 154789 (809) 154884 154981 (819) 154983
(819) 272111 504002 (850)
504002 (850)
5/^ 2 (850)
504002 (850) 504002 (850) 504002
(850) 504010 (829) 504010 (829) 504010 (829) 504013 504013
(850)
(850) 504025 (850) 504028
504028
(850)
(850) 504028 (850) 504029 (833) 504029
(833) 504032 (805) 504047
(833)
504048
504048
504048
504051 (850) 504063 (825) 504063 (809) 504066 504069
(833)
(833) 504071 (833) 504071
(833) 504074 (852) 504084 (810)
50’ '■’6 (806)
504U87
(806) 504094 (833) 504094 504095
504095
(833)
(850)
(850)
Rotating Hook Oil Flow Regulating Thumb Screw
DESCRIPTION
Spring Screw Throat Plate Screw (2) Tension Disc (2) Bed Slide Oil Removing Lint Screen Oil Removing Tube Retaining Clamp (2) Rotating Hook Bobbin Case Holder Position
Bracket Thread Take-up Spring Rotating Hook Bobbin Case Tension Spring Needle Bar Thread Guard Screw Throat Plate (small needle hole) Needle Bar Bushing (lower) Thread Eyelet Arm Spool Pin and Thread Eyelet Thread Retainer Rotating Hook Bobbin Tension Spring Arm Shaft (horizontal) Screw (back) Rotating Hook Shaft Oil Filter Wick Needle Bar Connecting Link Roller Bearing (18) Thread Take-up Lever Roller Bearing (18) Feed Lifting Rock Shaft Oil Plug Screw Washer
(fiber) Feed Rock Shaft Oil Plug Screw Washer (fiber) Presser Bar Lifting Lever Spring Feed Dog, 19 teeth (22 teeth to the inch) Face Plate Plug Presser Bar Lifting Lever Pin Set Screw Thread Take-up Spring Regulator Set Screw Bed Slide Spring Screw (2) Bed Slide Spring Feed Connecting Link Screw Nut Presser Bar Lifting Lever Connecting Rod Nut (2) Feed Bar Connecting Link Oil Wick Clamp Arm Shaft (horizontal) Bushing (center) Set
Screw
Arm Shaft (horizontal) Flanged Bushing (back)
Set Screw
Arm Shaft (horizontal) Flanged Bushing (front)
Set Screw Rotating Hook Shaft Bushing (back) Set Screw Rotating Hook Shaft Bushing (front) Set Screw Thread Take-up Lever Link Hinge Stud Set Screw Arm Side Shield Screw (2) Thread Take-up Lever Guard Screw Thread Take-up Lever Oil Guard Screw Feed Bar Carrier Clamping Screw (2) Feed Bar Hinge Pin Clamping Screw Bell Crank Bracket Set Screw (2) Feed Rock Shaft Flanged Bushing (front) Set
Screw Needle Bar Bushing (lower) Set Screw Needle Bar Bushing (upper) Set Screw Feed and Feed Lifting Eccentric Set Screw Feed Regulator Screw Rotating Hook Bobbin Case Latch Stop Screw Tension Stud Set Screw Feed Lifting Rock Shaft Collar Set Screw (Spec.
1050) (A)
Feed Reverse Lever Hinge Stud Collar Set Screw
(Spec. 1050) (2)
Feed Rock Shaft Collar Set Screw (Spec. 1050)
(2)
Feed Dog Screw (2) Presser Foot Screw Slack Thread Regulator Screw Arm Shaft (horizontal) Bevel Gear Set Screw (2) Feed and Feed Lifting Eccentric Position Screw Feed Reverse Lever Link Clamping Screw Oil Pump (centrifugal) (body) Screw (3) Feed Regulating Stud Head Cap Screw Rotating Hook Bobbin Case Holder Position
Bracket Screw Rotating Hook Bobbin Case Tension Regulating
Screw Rotating Hook Bobbin Case Tension Spring Screw Feed Regulating Stud Bushing Set Screw Thread Retainer Set Screw Feed and Feed Lifting Eccentric Sleeve Retain
ing Collar Set Screw Thread Take-up Crank Set Screw
PART NO.
504099 (809) 504101 (850)
504101 (850)
504101
504102
(850) (833)
504103 (803) 504111 504112 504117 504118
(809) (832) (850)
(803) 504119 (850) 504120 (850) 504122
(819) 504129 (850) 504145
(809) 505001 505008 505151 505152 505317
^05349 505350
505351
505353 505354 505355
505356 505358
505569 505575 505591 505643 505647 505648
505649 540403 540406 540415 540416 540420 540426
540437 540476 540524 540527 540528 540533 540534 540536 540537 540538 540539 540540
540541 540541 540542 540543
540544
540547 545033 (805) 545034 545035 545036
545036 545037
(805)
(805)
(819)
(819)
(819)
Arm Top Cover Screw (A)
DESCRIPTION
Arm Shaft (horizontal) Thrust Collar Set Screw
(2)
Arm Shaft (upright) Bevel Gear (lower) Set
Screw (2) Rotating Hook Shaft Bevel Gear Set Screw (2) Arm Shaft (upright) Bevel Gear (upper) Set
Screw (2) Feed Bar Connecting Link Cap Screw (2) Feed Lifting Rock Shaft Oil Plug Screw Needle Set Screw Thread Take-up Crank Clamping Screw Needle Bar Connecting Link Cap Screw Machine Pulley Set Screw (2) Needle Bar Crank Position Screw Arm Shaft (horizontal) Oil Plug Screw (2) Presser Bar Bushing (lower) Set Screw Oil Removing Tube Retaining Clamp Screw (2) Arm Dowel Pin (2) Arm Spool Pin Washer (felt) Tension Releasing Lever Hinge Pin Tension Releasing Lever Spring Bed Slide complete. Nos. 12A31, 15A88A and two
15A789 Rotating Hook Bobbin Case Rotating Hook Bobbin Case 5053A9 with A039A,
50A086 (806) and 50A087 (806) Rotating Hook Bobbin Case Hinge, Nos. 505353,
50535A and 505355 Rotating Hook Bobbin Case Latch Rotating Hook Bobbin Case Latch Lever Rotating Hook Bobbin Case Latch Lever Fulcrum
Pin Rotating Hook Bobbin Case Latch Spring Rotating Hook Bobbin Case complete. Nos. 50A032
(805), 505350, 505351 and 505356 Needle Bar Connecting Link Presser Bar Spring Thread Take-up Lever Presser Foot (spring hinged) complete Rotating Hook Shaft Oil Filter Wick Holder Rotating Hook Shaft Oil Filter complete, Nos.
1A30A2 and 5056A7 Presser Bar Bushing (lower) Arm Shaft (horizontal) with two 50A122 (819) Arm Shaft (horizontal) Flanged Bushing (front) Feed Connecting Link Feed Connecting Link Stud Bell Crank complete Arm Shaft (horizontal) and Needle Bar Crank,
Nos. 50A095 (850), 50A117 (850), 50A120 (850),
5A0A03 and 5A9230 (805) Feed Reverse Lever with 5A50A6 (809) Thread Take-up Crank Wearing Plate Needle Bar Bushing (lower) Thread Take-up Lever Oil Wick Holder Plug Needle Bar Bushing (lower) Felt Thread Take-up Spring Regulator 0-ring Thread Take-up Spring Regulator Rubber Cap Feed Bar Carrier Feed Bar Carrier 5A0536 with three 50A013 (850) Feed Bar Carrier Oil Wick Feed Lifting Rock Shaft Feed Lifting Rock Shaft complete. Nos. 1A3236,
50A111 (809), 5A0539 and 5A5810 Feed Lifting Rock Shaft Oil Wick (outer) Feed Rock Shaft Oil Wick (outer) Feed Rock Shaft Feed Rock Shaft complete. Nos. 1A3236, 5A05A2,
5A5160 (809) and 5A5839
Feed Bar 5A5987 with 5A0537, 5A5789, 5A5791,
5A5808 and two 50A103 (803) Feed Bar Connecting Link Oil Wick Arm Screw (back) (2) Arm Screw (front) (2) Arm Screw (intermediate) Arm Shaft (upright) Bevel Gear (upper) Set Screw
Hole Plug Screw Feed Regulator Set Screw Hole Plug Screw Thread Take-up Crank Clamping Screw Hole Plug
Screw
Page 7
NUKERICAL LIST OF PARTS FOR MACHINE 120U3
PART NO. DESCSgTION
545925 Machine and Machine Base and Oil Reservoir Screw
545063 (805) with 545924 (for shipping purposes only)
545938 Machine Base and Oil Reservoir
PART NO.
DF,SCRIPTION
r-
f
Page 8
NU>ii:R:CAL LIST OF PARTS FOR MACHINE 120U3
PART NO. 545038 (819)
545040 (809) 545043 (819)
545044 545045 545046 545047
545049 545050 545051 545053 545054 545055 545056
545057 545059
545060 545099
545136 545160 545340 545403
545404 545753 545754
545754 545755
545757
545758
545761
545762
545763
545764
545765
545766
545767
545768
545769
545770
545771
545773
545775
545776
545777
545788
545789
545791
545792
545793
545794
545799
545799
545800
(803) (833) (809) (850) (805) (805) (850) (850) (850) (805) (803)
(819) (810)
(833) (803)
(830)
(809) (806) (819)
(809)
545797
Arm Shaft (horizontal) Flanged Bushing (front)
DESCRIPTION
Oil Tube Cap Screw
Face Plate Screw (3)
Feed Lifting Rock Shaft Crank (front) Clamping
Screw
Feed Regulating Stud Feed Regulator Set Screw Feed Reverse Lever Clamping Screw Feed Reverse Lever Hinge Stud Cap Screw Oil Pump (centrifugal) Impeller Locking Screw Oil Pump (centrifugal) Screen Frame Screw (3) Oil Wick Holder Screw Presser Bar Lifter Hinge Screw Presser Bar Lifting Lever Hinge Screw Rotating Hook Oil Flow Regulating Thumb Screw Rotating Hook Shaft Oil Retaining Collar Set
Screw (2)
Tension Releasing Lever Screw
Feed Lifting Rock Shaft Crank Connecting Rod
Cap Screw (2) Feed Forked Connection Sleeve Screw (2) Presser Bar Guide Bracket Clamping and Tension
Releaser Screw Feed Connecting Link Stud Set Screw Feed Rock Shaft Oil Plug Screw Needle Bar Connecting Stud Clamping Screw Presser Bar Guide and Pressure Regulating Thinnb
Screw Lock Nut • Tension Regulating Thumb Nut (2) Arm Screw (front) Washer (2) Arm Shaft (upright) Bevel Gear (upper) Set
Screw Hole Plug Screw Gasket Feed Regulator Set Screw Hole Plug Screw Casket Thread Take-up Crank Clamping Screw Hole Plug
Screw Gasket Arm Shaft (horizontal) Bevel Gear with two
504066 (833) Arm Shaft (horizontal) Bushing (center) Arm Shaft (horizontal) Flanged Bushing (front)
Oil Tube
Arm Shaft (horizontal) Thrust Collar with two
504101 (850) Arm Shaft (upright) Arm Shaft (upright) Bevel Gear (lower) Right
Hand Spiral with two 504101 (850) Note: To ensure proper functioning of Gears,
No. 545764 will not be supplied separately but will be substituted by pair of Gears No. 545862.
Arm Shaft (upright) Bevel Gear (upper) Left
Hand Spiral with two 504102 (833) Note: To ensure proper functioning of Gears,
No. 545765 will not be supplied separately but will be substituted bv pair of Gears No. 545863.
arm Shaft (upright) Bushing (lower) Arm Shaft (upright) Bushing (upper) Arm Side Shield Arm Side Shield complete, Nos. 545768, 545770
and 545771 Arm Side Shield Wick Spring Holder
Arm Side Shield Wick
Arm Top Cover Gasket Bed Hole Plug Bed Leg (long) Bed Leg (short) (3) Feed Bar Connecting Link Feed Bar Connecting Link 545788 with 272111 and
540547 Feed Bar Hinge Pin Feed and Feed Lifting Eccentric with 504029 (833)
and 504069 (833) Feed and Feed Lifting Eccentric Sleeve Feed and Feed Lifting Eccentric Sleeve Retaining
Collar with 504095 (850) Feed Forked Connection Feed Forked Connection Hinge Stud Feed Lifting Rock Shaft Crank Connecting Rod
Hinge Stud
Feed Forked Connection Sleeve
PART NO. 545806
545807
545808
545810 545812
545813 545814 545815
545816 545817 545818 545819 545820
545821
545822 545823 545824 545825 545825 545827 545829
545832 545836 545837
545838
545839 545840 545841
545844
545845
545846
545847 (805)
545848
545849
545850 (805)
545851
545852
545854
545855
545856
545857
545858
545859
545860
545861
545862
545863
545864
545868
545869
545870
545871
545872
545873
545875
545876
545883
545884
545885
545886
545887
Feed Lifting Rock Shaft Collar with two 504048
DESCRIPTION
(Spec. 1050) (2)
Feed Lifting Rock Shaft Crank (back) with two
549183 (850)
Feed Lifting Rock Shaft Crank (front) with ^
545043 (819) f Feed Lifting Rock Shaft Oil Wick Feed Lifting Rock Shaft Crank Connecting Rod
with two 545059 (810) Feed Regulating Stud 545044 (803) with 545817 Feed Regulating Stud Bushing Feed Regulating Stud Bushing 545814 with
545816 Feed Regulating Stud Bushing 0-ring Feed Regulating Stud 0-rlng Feed Regulating Stud Head Feed Regulating Stud Head Lock Pin Feed Regulating Stud Head Lock Pin Spring Feed Regulator with 504029 (833), 545045 (833)
and 545136 (830) Feed Regulator Hinge Stud Feed Regulator Hinge Stud 545822 with 545825 Feed Regulator Hinge Stud Flanged Bushing Feed Regulator Hinge Stud 0-ring Feed Reverse Lever Hinge Stud 0-ring Feed Reverse Lever Hinge Stud Feed Reverse Lever Hinge Stud 545827 with 5450^
(850) and 545825 Feed Reverse Lever Link with 504071 (833) Feed Rock Shaft Flanged Bushing (front) Feed Rock Shaft Collar with two 504048 (Spec.
1050) Feed Rock Shaft Crank with two 549183 (850) Feed Rock Shaft Oil Wick Machine Pulley with two 504119 (850) Needle Bar Bushing (upper) Oil Pipe Oil Pipe Oil Pipe Clamping Sleeve Oil Pipe Clamping Sleeve Nut /Р Oil Pipe complete, from Oil Pipe to Arm Shaff
(horizontal) Bushing (center) Nos. 545844,
545846 and 545847 (805) Oil Pipe Clamping Sleeve Oil Pipe Clamping Sleeve Nut Oil Pipe Clamping Sleeve Nut Adapter Oil Pipe 545845 with 545849 and 545850 (805)
for Oiling Rotating Hook Shaft Bearing (front Oil Pump (centrifugal) (body) with 545851 Oil Pump (centrifugal) Cover Oil Pump (centrifugal) Impeller Oil Pump (centrifugal) Screen Oil Pump (centrifugal) Screen Frame Oil Wick (2) Oil Wick Holder Oil Wick Holder 545860 with 545051 (850) and
two 545859 Pair of Gears Nos. 545764 and 545887 Pair of Gears Nos. 545757 and 545765 Presser Bar (hollow) Presser Bar Lifter Presser Bar Lifting Lever Presser Bar Lifting Lever 545869 with 154781
(850) and 545875 Presser Bar Lifting Lever Connecting Rod Presser Bar Lifting Lever Connecting Rod Oil
Mist Retaining Disc (felt) Presser Bar Lifting Lever Connecting Rod Swivel Presser Bar Lifting Lever Pin Presser Bar Guide and Pressure Regulating Thumb
Screw 549363 (819) with 545403 (819)
Rotating Hook Oil Flow Regulating Thumb Screw
Spring
Rotating Hook Shaft
Rotating Hook Shaft 545884 with 505648 Rotating Hook Shaft 545885 with 545890 Rotating Hook Shaft Bevel Gear (left hand sp^_
with two 504101 (850)
Note: To ensure proper functioning of Gears, No. 545887 will not be supplied separately bu will be subetituted by pair of Gears No. 5458
Page 9
NUMERICAL LIST OF PARTS FOR MACHINE 120U3
PART NO.
545888 545889 545890
.545892
45893
'545894
545895
545896 545897 545898 545899 545900
545901 545902 (701) 545903
545904 545905 545906
545907
545908 545909 545931 545932 545940 545941 545942 545944 545947 545948
545949 545949
545950
545951
45954 545955 545960
545982 545983 545987 545990
545991
545992 545994
545995
545996 545997 546914 546915 546916
546925 546927 546928
546929 546930 546931 546933 546934 548479 549182 (803) 549183 (850)
549183 (850)
4_/549186 (806)
549187 (803)
549230 (805) 549231 (803) 549363 (819)
Rotating Hook Shaft Bushing (back) Rotating Hook Shaft Bushing (front) Rotating Hook Shaft Oil Retaining Collar with
two 545046 (803)
Slack Thread Regulator
Tension Releasing Disc
Tension Releasing Lever (body)
Tension Releasing Lever (body) 545894 with
545057 (819) and 545896 Tension Releasing Lever Segment Tension Releasing Pin Tension Stud Tension Stud 545898 with two 545404 (809) Tension complete, Nos. 32758, 125314, 546928,
545893, 545897, 545899 and two 2102 Thread Eyelet (side of arm) Thread Take-up Lever Guard Thread Guard (side of arm) Thread Take-up Lever Link Thread Take-up Lever Link Hinge Stud Thread Take-up Lever Link Hinge Stud Oil Wick Thread Take-up Lever Link Hinge Stud 545905
with 545906 Thread Take-up Lever Oil Guard with 545909 Thread Take-up Lever Oil Guard Wick Feed Reverse Lever Hinge Stud Flanged Bushing Arm Shaft (horizontal) Screw (back) Gasket Needle Bar (hollow) with 504112 (832) Needle Bar Thread Guard Needle Bar Thread Guard Screw Washer Oil Flow Window
Feed Reverse Lever Link Spring Feed Reverse Lever Hinge Stud Collar with two
504048 (Spec. 1050) Feed Lifting Rock Shaft Flanged Bushing (2) Feed Rock Shaft Flanged Bushing (back) Rotating Hook with two 549182 (803) Rotating Hook complete. Nos. 545950, 545954,
545955, three 549187 (803) and four 549186
(806) Rotating Hook Section Rotating Hook Thread Guard Thread Take-up complete. Nos. 505591, 545904,
545907, 546916 and eighteen 143056 Presser Bar Lifting Lever Link Presser Bar Guide Bracket with 545099 (803) Feed Bar (body) Rotating Hook and Rotating Hook Bobbin Case
Holder complete, Nos. 545951 and 545994
Rotating Hook, Rotating Hook Bobbin Case Holder
and Rotating Hook Bobbin Case complete. Nos.
545990 and 505358 Thread Take-up Crank Rotating Hook Bobbin Case Holder Rotating Hook Bobbin Case 505358 with 545994
(for agent only)
Arm Shaft (horizontal) Flanged Bushing (back)
Oil Removing Tube
Needle Bar Connecting Stud with 545340 (806)
Needle Bar Connecting Link 505569 with 546914 Thread Take-up Crank 545992 with 504118 (803) ,
546915 and eighteen 143056 Face Plate Gasket Thread Take-up Spring Regulator with 504047 (833) Thread Take-up Spring Regulator 546927 with
540533 and 540534 Arm Top Cover with 545944 and 545773 Arm. Top Cover Assembly Nos. 546929 and 546931 Arm Top Cover Pin Cushion Needle Bar Bushing (lower) 540524 with 52171 Face Plate with 149111 (701) and 546925 Oil Pump (centrifugal) (body) Position Pin (2)
Rotating Hook Set Screw (2)
Feed Lifting Rock Shaft Crank (back) Clamping
Screw (2)
Feed Rock Shaft Crank Clamping Screw (2) Rotating Hook Thread Guard Screw (4) Rotating Hook Section Screw (3) Arm Shaft (horizontal) Screw Plug (front) Feed Connecting Link Screw Presser Bar Guide and Pressure Regulating Thumb
Screw
DESCRIPTION
PART N0. CAT.1361
504105 504105 505402 545061 545062 545062
545062 545405 545912 545913 545914
545915
545916
545917
545918
545919
545921
545922
545923
127318
143327
149057
504114 (809)
505638
CAT.2270
(809) (809)
(803) (833) (833) (833) (809)
504113 (851)
505637
505645 505646
540525 540546
545935
41400
55623 143308 505655 (001)
505656 (001)
541513 541514 541515 (001) 541561 541562
545926 545927
549281 (001) CAT.1361 CAT.2270
540471 540500 545036 (819) 545063 (805)
545064 (805)
545754 545924
Needle (88 x 9 tU)
Rock Shaft Knee Arm Plate Set Screw
Rock Shaft Knee Arm Set Screw
Rock Shaft Knee Arm Plate with 504105 (809)
Rock Shaft Crank Adjusting Screw Rock Shaft Crank Clamping Screw Rock Shaft Knee Arm Hub Clamping Screw
Rock Shaft Stop Dog Clamping Screw Rock Shaft Crank Adjusting Screw Lock Nut Bell Crank Plunger Rock Shaft Rock Shaft 545913 with 545915, 545921 and 545922 Rock Shaft Crank with 545062 (833) and 545916 Rock Shaft Crank Adjusting Screw 545061 (803)
with 545405 (809) Rock Shaft Knee Arm Rock Shaft Knee Arm Hub with 504105 (809) and
545062 (833)
Rock Shaft Knee Arm complete. Nos. 505402,
545917 and 545918 Rock Shaft Spring Rock Shaft Stop Dog with 545062 (833) Rock Shaft complete. Nos. 545914 and 545919
PARTS FOR 120U13 MACHINE
WHICH DIFFER FROM 120U3 MACHINE
Throat Plate (small needle hole), in place of
52033 Needle Bar Thread Guard
Feed Dog, 21 teeth (22 teeth to the inch), in
place of 149031 Needle Clamp Screw Needle Bar Thread Guard Screw Needle Clamp 505646 with 143327 and 504114 (809) Needle Clamp with 504113 (851) Needle Bar (hollow), in place of 545940 Needle Bar (hollow) 505645 with 505638 Needle Bar Bushing (lower), in place of 540524 Needle Bar Bushing (lower) 540525 with 545935,
in place of 546933
Needle Bar Bushing (lower) Thread Eyelet, in
place of 52171 Needle (16 x 257 #16)
ACCESSORIES AND ATTACHMENTS
Machine Rest Pin (wood) Rotating Hook Bobbin (3) Machine Rest (felt) with wire nail (4) Universal Bobbin Winder complete (Include Wood
Screw (2)) (purchased part)
Thread Unwinder (for two spools) complete
(include Wood Screw (3)) (purchased part) Screw Driver (large) Screw Driver (small) Cloth Guide (purchased part) Wrench Accessory Box Machine Hinge Connection (2) Oil Can (950 cc, filled with Singer Тире "C"
Oil)
Cloth Guide Screw (purchased part) Needle (88 x 9 //14) (for 120U3 М/С) (3) Needle (16 x 257 #16) (for 120U13 М/С) (3)
MACHINE BASE AND OIL RESERVOIR
Machine Base and Oil Reservoir Plug (2) Machine Base and Oil Reservoir Gasket Oil Reservoir Oil Drain Plug Screw Machine and Machine Base and Oil Reservoir
Screw (for shipping purposes only)
Machine and Machine Base and Oil Reservoir
Screw Hole Plug Screw Oil Reservoir Oil Drain Plug Screw Gasket (4) Machine and Machine Base and Oil Reservoir Screw
Spring Washer (for shipping purposes only)
DESCRIPTION
KNEE LIFTER PARTS
(Supplied with Machine)
(Supplied with Machine)
(Supplied with Machine)
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use