SINGER 114-24 User Manual
Form 8934
June, 1023
PRINTED IN U. B. A.
LIST
OF
PARTS
MACHINES
Nos. 114-22 to 114-24
THE SINGER MANUFACTURING COMPANY
Copyright, U. S. A.,
i;»16, 1917, 1920, 1921, 1922 and 1923,
BY
The Singer Manufacturing Company
All Rights Reserved for all Countries
INDEX
PAGE
Attachments and accessories.............................................................. 41
Machine No. 114-22
“ “ 114-23
“ “ 114-24
Numerical List of Parts............................................................................ 47
Obsolete Parts............................................................................................ 45
Protector........................................................................................................ 41
Stand................................................................................................................ 42
Startinq IjEver and Foot Lifter Parts..................................................... 42
Table Belt Guide........................................................................................... 43
Thread Unwinder........................................................................................... 44
TiuMMiNds FOR Table 5380....................................................................... 44
......................................................................
....................................................................
....................................................................
18
29
7
INSTRUCTIONS FOR ORDERING
In ordering from thia list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part i.s in every
case the number of the single part only
Every combination of parU sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination
Each number always indicates the SAME I'AUT in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A. Hardened, I’olished and Plated
Polished and Plated
B.
Hardened only.
c.
Polished or.ly.
D.
Soft, not Polished,
E.
Hardened and Polished
F.
G.
Blued.
H.
Plated only.
J.
Hardened and Plated.
K.
Brass or Gilt.
L.
Oxidized
M
Japanned
P
Parkcrized.
R
These letters MUST BE USliD when they appear in the list,
and AFTER the number as in the list.
In this series
1 to 1500 and 50001 to 51500 are Screw Numbers
1501 to 1800 are Nut Numbers,
1801 to 2000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 114-22
FOR TACKING PAPER TICKETS ON CLOTHING TO DISTINGUISH
LOT, COLOR, SIZE, ETC., WHILE IN PROCESS OF MANU
FACTURE. MAKES A TRIANGULAR SHAPED TACK CON
SISTING OF FOURTEEN STITCHES INCH ACROSS THE
BASE AND INCH FROM THE APEX TO THE BASE. THE
LONG STITCH IN THE CENTRE OF THE BASE »F THE
TRIANGLE INDICATES THE PLACE AT WHICH TO START
TO UNRAVEL THE THREAD FOR DETACHING THE TICKET.
SUPERSEDES 114-20 MACHINE.
OBSOLETE
NO. PL.XTE NAME
*59701
-------
16532 6976 “ Dowel Pin
4448 6976 “ Oil Tube for intermediate bearing .
56015 6976 " “ “ “ oiling 59705 and 59706
880e 6998 “ Screw
59702 6975 “ Shaft (horizontal).....................................
17703 6981 “ “ “ Bushing (back) .
50333c 6998 “ “ “ “ “
Arm with 4449, 59767 and two 164e. .. .
................................................
.......................................................
Adjusting Screw........................................
L ¿422
PARTS FOR MACHINE No. 114-22
PARTS FOR MACHINE No. 114-22
NO. PLATE NAME
1520e 6994 Arm Shaft (horizontal) Bu.shing (hack)
*4449
Adjusting Screw Nut
------
Arm Shaft (horizontal) Bushing (front).
................................
59703 6976 “ “ “ Gear with two
1036c
........................................................
1036c 6976 Arm Shaft (horizontal) Gear Set Screw .
59704 6976 “ “ (upright)
........................................
59705 6976 “ “ “ Bushing (lower). . .
448c 6992 “ “ “ “ “ Set
Screw.........................................................
59706 6976 Arm Shaft (upright) Bushing (upper). . .
448e 6992 “ “ “ “ “ Set
Screw.........................................................
59707 6976 Arm Shaft (upright) Gear (lower) with
two 1253c..................................................
1253c 6976 Arm Shaft (upright) Gear (lower) Set
Screw.........................................................
59708 6976 Arm Shaft (upriglit) Gear (upper) with
two 1253c..................................................
1253c 6976 Arm Shaft (upright) Gear (upper) Set
Screw.........................................................
124674 7020 Arm Side Cover
...............................................
190d 6990 “ “ “ Screw....................................
18498 6975 Belt Cover...........................................................
59795 6977 “ “ Bracket with 184k and 59796.
184e 6998 “ “ “ Screw Stud
.................
59796 7019 “ “ “ Stud............................
217d 6998 “ “ Screw.............................................
39222 6977 “ Shifter
39223 6976 “ “ Clamp
1255d 6976 “ “ “ Screw
......................................................
...........................................
...............................
62174 7026 Clamp with 1220e and 17928.............................
62258 7026 “ Arm with 17714
62259
------------
“ “ 62258 with 62260 and two
2011>
........................................................
....................................
17710 7026 Clamp Arm Hinge Plate.....................................
1176J 7026 “ “ “ “ Screw
....................
62260 7026 “ “ Hook.........................................
201d 7026 “ “ “ Screw............................
59710 6979 “ Bifter
............._..................................
176d 7009 “ “ Screw'........................................
17928 7000 “ Position Stud
17712 7001 “ Pressure Spring
17713 7026 “ “ “ Bracket
.....................................
.................................
.........
1177d 7026 “ “ “ “ Screw..
17714 7026 “ “ “ Guide Block--------
H78j 7026 “ “ “ Screw
............
NO. PL.ATE NAME
1220e 7000 Clamp Screw Stud
1656j 7000 “ Thumb Nut
62262
--------
Clamp complete, Nos. 1656j, 62174 and
62259
*62101
--------
Cloth Plate..........................................................
62102 6980 “ “ Guide Block (left)
.............................................
.............................................
.........................................................
........................
742k 6980 “ “ “ “ “ Screw...
1547i> 6980 “ “ “ “ “Screw
Nut
.............................................................
62103 6980 Cloth Plate Guide Block (right)
3021 6980 “ “ “ “ “ Rivet
190d 6990 “ “ Screw
62104 6980 “ “ Stop
26770 6980 “ “ “ Rivet
............................
.............................
...................................
62105 6975 Cloth Plate complete, Nos. 742f, 1547d,.
26770, 62101 to 62104 and two 3021. .
*62178
62189 7032 “ Bottom Cover
-----
Cylinder...........................................................
.......................................
62108 6981 “ End Cover.......................................
62190
-------------
“ “ “ 62108 with 1034n,
62111 to 62113, 62185, 62189 and
four 1477d
.................................................
62185 6980 Cylinder End Cover Bracket................................
62111 6980 “ “ “ “ Hinge Pin.
1477 D 6980 “ “ “ “ Screw
62112 6980 “ “ “ Hinge
.........................
1477d 6980 “ “ “ “ Screw
62113 6980 “ “ “ Spring
10341) 6980 “ “ “ “ Screw
..........
............
........................
...........
62114 6980 “ Top Cover.......................................
286n 6980 “ “ “ Thumbscrew
59711 6981 Faceplate
59712
------
Face Plate complete, Nos. 2086* 9544,
.......................................................
..................
9545, 59711 and two each 229n, 2107
and 9543
....................................................
164d 6990 Face Plate Screw...............................................
2107 6980 “ “ Thread Guard
................................
229d 7027 “ “ “ “ Screw.......
9543 6980 “ “ “ Nipper Disc
..
9544 6980 “ “ “ “ “ Cover..
208n 6980 “ “ “ “ “
Screw...................................................
9545 6980 Face Plate Thread Nipper Disc Spring ..
62115 6982 Feed Across Connection Adjusting Stud
1649c 6982 “ “ “ “
Nut (left hand thread)
................................
.....
..
10 PARTS FOR MACHINE No. 114-22
NO. 1>1,.\TE NAME
Ki.iOo i)9H2 Feed Aoross Connection .\djusting Stud
G3940
Nut (right hand lliread)
------
F(Ui i .Aeross Conneeting (lever end) with
.............................
4207() and two 89(1 e...............................
(idOll 7027 F(u;d Acro.ss ('onneetion (lever end)
(i3940 with 55381
.....................................
55381 7027 Fee 1 .Across Connecting (lever end) Ball
Stud
...........................................................
1185c 0982 Feed Acro.ss Connection (lever end) Ball
Stud Set Screw
..........................................
03912 ------Feed .Across Connection (regulator end)
with 42070 and two 890k
.........................
03913 7027 Fee 1 Across Connection (regulator end)
03942 with 03944......................................
03944 7027 F'ee 1 Across Connection (regulator end)
Ball Stud....................................................
*42070
------
F'ee.l Across Connection Cap
...............
890e 7027 “ “ “ “ Screw
............
62147 7002 “ “ Uiver with 1185c and 1952.
17737 7004 “ “ “ Hinge Stud
lOOi) 0998 “ “ “ “ “ Clamping
Screw
........................................................
62149 7001 Feed Across laiver Plate with 62153. . . .
62150 7001 “ “ “ “ Cover
1094f 6985 “ “ “ “ Screw
..........
..........
55300 6985 “ “ “ “ Steady Pin---
1952 7027 “ “ “ Roller and Stud
02151 7002 “ “ Regulator..........
.......................
505991) 7027 “ “ “ Adjusting Screw-
Stud ..........................................................
1076c 6982 F’eed Across Regulator Adjusting Screw
Stud Nut....................................................
46244 7027 Feed Across Regulator Adjusting Screw
Stud Nut Washer (fibre)
...........................
17738 0982 FAied Across Regulator Adjirsting Screw
Stud Nut Washer (steel)
...........................
llSSi) 6998 F’eed Across Regulator Hinge Screw. . . .
62152 7001 “ “ “ Link......................
1189e 7001 “ “ “ “ Screw Stud
62153 7001 “ “ “ “ Stud
.............
02284 7030 “ Cam with two 1192c and three
each 190d, 208d, 227d, 17874 and
62138
........................................................
18415 6987 F’eed Cam Driving Worm with 1441c
and 1442c..................................................
1442c 6987 F'eed Cam Driving Worm Position Screw.
1441c 0987 “ “ “ “ Set Screw
..............
.....
........
PARTS FOR MACHINE No. 114-22
.NO. 1М.ЛТЕ NAME
17797 0977 F'eed Cam Driving Worm Wheel with
453c...........................................................
3012 7010 F'eed Cam Driving Worm Wheel Pin.
4.53<: 0987 “ “ “ “ “Set
Screw.........................................................
18384 7019 Feed Cam Pin
1192(; 0987 “ “ SefScrew
62155 7002 “ “ Shaft...........................................
.....................................................
.......................'...............
l()53c 0999 “ “ “ Nut.......................................
39358 7004 “ Plate
....................................................
*18445 0989 “ “ Carrier Bar.............................
62156 ------------ “ “ “ “ 18445 with 934j,
59730 0987
50300(.'6987
18368
0987
934j
()987
1654c 7027
17800 7027
1195e 7027
7002
62157
62148 7002
-
*39310
----
lOOi) 0998
8589 7019
1177u 7026
17744
6987
17743 0987
1953 7019
1655c 6985
1094 F, 1195e, 17743, 18368, 62149,
62150, two 55300 and four 17806
F'eed Plate Carrier Bar Pivot Block
..............
..............
“ “ “ “ “ “ Screw
“ “ “ “ Plato................................................
“ “ “ “ “ Screw
...........................................
“ “ Nut........................................................
“ “ Position Stud
“ “ Screw Stud
“ Regulator with 1953
........................................
...........................................
...............................
“ “ Bracket with 39310 and
three 160d
F'eed Regulator B.acket Cap
....................................................
........................
“ “ “ “ Screw..............................................
“ “ “ Dowel Pin. ...
“ “ “ Screw.................................................
“ “ Hinge Stud
...........................................
“ “ Post.......................................................
“ “ Roller and Screw Stud
with 1055c and 14017
..............................
F'eed Regulator Roller and SerftW Stud
Nut.............................................................
14017 1)985
1190c
39313 7004 “ “ Swivel
IPJlu 6987
59731 6990 Knife
02124
F'eed Regulator Roller and Screw Stud
Nut Washer
F'eed Regulator Stop Screw..........................
6987
...............................................
..................................................
“ “ Thumb Screw.......................................
.............................................................
0975
“ Bar with 62130 and two 3021....
02125 6990 “ “ Cap.......................................................
164n 6990 “ “ “ Screw
62120 0990 Knife Bar Connection with 17917
190d 0990
17915 6990
“ “ “ Screw................................................
“ “ “ Slide Block
................................................
...............
.......................................
11
12
NO. PI. ATE NAME
17917
PARTS FOR MACHINE No. 114-22
--------
Knife Bar Coiinection Slide Block 17915
with 17916
................................................
17916 6990 Knife Bar Connection Slide Block Stud.
69734 6990 “ “ Driving Lever with 223k and
59735
........................................................
1382f 6998 Knife Bar Driving Lever Hinge Screw
1681c 6999
Nut
............................................................
59735 6990 Knife Bar Driving Lever Lock Slud
223k 6990 “ “ “
Screw.........................................................
62127 6990 Knife Bar Guide...............................................
1235k 6990 “ “ “ Screw...................................
8734 7015 “ “ Retaining Spring
62192 7015 “ “ “ “ Bracket...
62128 6990 “ Holder with 59739
.................................
62129 6990 “ “ Cap with 59739..........................
691K 6990 “ “ “ Screw
59739 6990 “ “ “ .Stud
...............................
.................................
62130 6990 “ “ Connection.............................
302 / 6980 “ “ “ Rivet
.........................
59739 6990 “ “ Stud........................................
236p 6990 “ Screw......................................................
62179 7015 Looper with 34418
•59742
--------
“ Collar.............................................................
..........................................
59743 6991 “ Driving Shaft.........................................
62131 6991 “ “ “ Bushing
......................
52045 6992 “ “ “ “ Packing
(cotton)
.....................................................
1148c 7015 Looper Driving Shaft Bushing Set Screw
59745 6991 “ “ “ Collar with two
465c...............................................................
465c 6991 Looper Driving Shaft Collar Set Screw ,
59746 6991 “ “ “ Coupling with two
50150c.......................................................
50150c 6991 Looper Driving Shaft Coupling Set Screw
59707 6976 “ “ “ Gear with two
1253c
59747 6992 Looper Driving Shaft Gear Cover
........................................................
...................
190n 6990 “ “ “ “ “ Screw .
1253c 6976 “ “ “ “ Set Screw
59748 6991 “ “ “ IJniversalJoint.,..
50150c 6991 “ Set Screw
..............................................
62158 7002 “ Shaft with 50150c and 59742....
59745 6991 “ “ Collar with two 465c
465c 6991 “ “ “ Set Screw
.....................
59746 6991 “ “ Coupling with two 50150c.
-----
.......
.....
PARTS FOR MACHINE No. 114-22
NO. PLATE NAME
50150c 6991 Looper Shaft Coupling Set Screw
.....................
13
59750 6991 “ “ Eccentric with two 624c.. .
62132 6991 “ “ “ Connection with
59752 and two 171e..................................
•59752 Looper Shaft Eccentric Connection Cap.
171e 6991 “ “ “
Screw.........................................................
62133 6991 Looper Shaft Eccentric Connection Stud
(eccentric)..................................................
1095f 6991 Looper Shaft Eccentric Connection Stud
Cap Screw..................................................
1259c 6991 Looper Shaft Eccentric Connection Stud
Set Screw...................................................
624 c 6991 Looper Shaft Eccentric Set Screw....................
62134 6991 “ “ Slide Block
62135 6991 “ “ “ “ Cap
....................
.....................
1186c 6991 “ “ “ “ “ Screw....
34418 6991 “ Washer...................................................
59756 6989 Needle Bar with 1072k
•39203 6992 “ “ Connecting Link
....................................
..
62283 “ “ “ “ 39203 with
377c, 1518b and 2052
...............................
377c 6992 Needle Bar Connecting Link Hinge Screw
1518e 6992
Nut.............................................................
2052 6992 Needle Bar Connecting Stud with 155c.
155c 6992 “ “ “ “ Set Screw.
59757 6992 “ “ Crank Wheel with 448c and
1293c.........................................................
1293c 6992 Needle Bar Crank Wheel Position Screw
448c 6992 “ “ “ “ Set Screw
59758 6993 “ Guard.....................................<*.
59759 6993 “ “ Cam with two 465c
465c 6991 “ “ “ Set Screw
..................
.......................
........
...........
2273 7027 “ “ Pin..............................................
69760 6989 “ “ Shaft...........................................
69761 6993 “ “ “ Collar with two 465c
465c 6991 “ “ “ “ Set Screw. .
69762 6993 “ “ “ Crank with 51812
and two 465c..............................................
51812 6993 Needle Guard Shaft Crank Roller and
Stud............................................................
465c 6991 Needle Guard Shaft Crank Set Screw...
59763 6993 “ “ “ End Bearing
•59764 6989
Bracket
......................................................
It PAirnS FOR MACHINE No. 111-22
PARTS FOR MACHINE No. 114-22
15
NO. I'l.ATE N.AME
2022 7027 Ni'odle Giiiinl Shaft Find Rearing
Rruck(d. Dowel Pin..................................
965n 699.1 Needle (inard Shaft End Bearing
Bracket Screw
..........................................
llSOn 6993 Needle Guard Shaft End Bearing Cap
Screw
........................................................
5976.5 6993 Needle Guard Shaft Spring
.........................
,59766 6993 “ “ “ “ Collar with
621 r..........................................................
621c 6991 Needle Guard Shaft Spring Collar Set
Screw
.......................................................
233d 6995 Needle Guard Shaft Spring Screw
1()72e 6993 “ Set Screw
..............................................
...................
2058 6989 Pre.sser Bar.........................................................
17811 6992 “ “ Collar with two 196e
196f 6992 “ “ “ Set Screw
.................
....................
17812 6992 “ “ Guide Bracket with 1,53c.. .
1,53c 6987 “ “ “ '• Set Screw . ,
17813 1)981 “ “ Lifting I.ever
........................
,59767 6996 “ “ “ “ Bracket...........
161e t)990 “ “ “ “ “ Screw
1201d 7IK)6 “ “ “ “ Hinge Screw,.
17815 7032 “ “ “ “ Rod.................
17816
-----
“ “ “ “ “ Chain...
8114 6989 “ “ Spring
17941 6977 Pulley (loo.se) 23-s in. diain
17818 1)977 “ “ Bushing
.......................................
...........................
................................
2269 6991 “ “ “ Position Pin....
1202d 6998 “ “ Cap Screw
............................
17912 6977 “ (tight) 2Js in. diam., with 2269..
2022 7027 “ “ Pm.........................................
17955
------
Pulleys complete, Nos. 1202d, 1206c,
17848, 178,54, 17941 and 17942
178,53 6994 Starting Lever
............
..................................................
12f)2c 1)998 “ “ Hinge Screw............................
1662c 699i) “ “ “ “ Nut.................
17886 7032 “ “ Pitman.....................................
17854 6994 Stop Cam
............................................................
1785.5 6994 “ “ Interlocking Rod.....................
124697
----------
“ “ “ “ Case
............
62136 6977 “ “ “ “ “ 124697
()2L59
with ,59771 and two 193d
--------
Stoj) Cam Interlocking Rod Case 62136
........................
with 1318d, 17855, 17863, 17864,
39222, 39223 and two 1255d
...................
59769 6977 .Stop Cam Interlocking Rod tiase Bracket
NO. rn.ATE NAME
62186
--------
Stop Cam Interlocking Rod Case Bracket
complete. Nos. 1182e, 1196c, 1204e,
1254c, 1262c, 1508e, 1662c, 17853,
17859, 17861, 17862, 17872, 17873,
,59769, 62159 and two'898D....................
621,37 ------ Stop Cam Interlocking Rod Case Bracket
62186 with 39343, 39344 and two 1186d
21828 6976 Stop Cam Interlocking Rod Case Bracket
Dowel Pin
.............,...................................
50372i) 7015 Stop Cam Interlocking Rod Case Bracket
Screw.........................................................
1204k 6998 Stop Cam Interlocking Rod Case Hinge
Screw........................................................
178,59 6977 Stop Cam Interlocking Rod Case Socket
,Ioint
..........................................................
898i) 6998 .Stop Cam Interlocking Rod Case Socket
Joint Cap Screw
........................................
39343 6981 Stop Cam Interlocking Rod Case Spring
(fiat)...........................................................
430c 6994 .Stop Cam Interlocking Rod Case Spring
,\djn.sting Screw
.......................................
1520e 6994 Stop Cam Interlocking Rod Case Spring
Adjusting Screw Nut.................................
39344 6994 Stop Cam Interlocking Rod Case Spring
Bracket with 430c and 1520e
...................
1186d 6991 Stop Cam Interlocking Rod Case .Spring
Bracket Screw
...........................................
17861 6994 Stop Cam Interlocking Rod Case Stop
Stud............................................................
1254c 6998 Stop Cam Interlocking Rod Case Stop
Stud Screw Bushing
..................................
1508e 6999 Stop Cam Interlocking Rod Case Stop
Stud Screw Bushing Lock Nu'f.
...............
17862 6994 Stop Cam Interlocking Rod Case Stop
Stud Spring................................................
59771 6994 .Stop Cam Interlocking Rod Case Wear
ing Block...................................................
193d 7027 Stop Cam Interlocking Rod Case Wear
ing Block Screw........................................
17863 6994 .Stop Cam Interlocking Rod Spring.................
17864 6994 “ “ “ “ Stop
..............
1318d 6994 “ “ “ “ “ Screw.
3012 7019 “ “ Pin....................................................
1206c 6994 “ “ Screw...............................................
2102 6995 Tension Disc........................................................
1560c 6995 “ Regulating Thumb Nut
........................
50148c 6995 “ Screw Stud............................................
16
PARTS FOR MACHINE No. 114-22
PARTS FOR MACHINE No. 114-22
17
NO. PI..4TE NAME
42336 6995 Tension Spring....................................................
13915 6995 “ “ Rushing
10145 6995 “ Thread Guide
59772 6995 Thread Eyelet (head of arm)
............................
.......................................
...........................
2331) 6995 “ “ “ “ “ Set Screw.
17431) 6979 “ Nipper Adjusting Thumb Nut . .
59773 6995 “ “ Body
624c 6991 “ “ “ Set Screw
.................................
.....................
59774 6995 “ “ Cnin with two .501.50c...
50150c 6991 “ “ “ Set Screw..................
2921 6995 “ “ Disc...................................
12162 6995 “ “ “ Guide Pin
62169 6979 “ “ “ Spring
59775 6995 “ “ Eyelet
................................
15271) 6995 “ “ Lock Nut
.................
.......................
..........................
59776 6995 “ “ Stud with 13538...............
1353S 6995 “ “ “ Position Pin
13539 6995 “ “ “ Roller
13540 6995 “ “ “ “ Pin
2026 6995 “ “ “ Spring
.................
.......................
....................
......................
59777 ------ Thread Nipper Stud complete, Nos.
59778 -
13539, 13540 and 59776
Thread Nipper complete. Nos. 1527n,
..........................
1743d, 2026, 59773, 59775, 59777,
62138 6987
208u 6980
227n 7015
59780 6990
1196c 6998
62169 and two 2921
Thread Pull-off Cam
“ “ “ Screw (long)
“ “ “ “ (short)
“ “ Driving Lever....................
“ “ “ “ 11 i n g e
Screw
........................................................
.................................
.....................................
................
..............
59781 6996 Thread Pull-off Driving Lever Spring...
59782 6996 “ “ Lever
59783 6996 “ “ “ Bushing
................................
.................
1445u 699() Thread Pull-off Lever Bushing Screw. . .
59784 6996 “ “ “ Connection
............
501 16d 6996 “ “ “ “ Hinge
Screw (driving lever end)
.........................
501110 6996 Thread Pull-off Lever Connection Hinge
Screw (lever end)......................................
59785 6996 Thread Pull-off Regulator
62170
------
“ Take-up Body with 62172
42808 6979 “ “ Roller
62171 6979 “ “ “ Cap
337d 6979 “ “ “ “ Screw
62172 6979 “ “ “ Pin
...............................
............................
..............................
......................
............
.......................
NO. PLATE NAME
62173 6979 Thread Take-up complete. Nos. 337d,
42808, 62170 and 62171
691F 6990 Thread Take-up Screw
39452 6979 “ Wiper Body
...........................................
...........................
......................................
39453 6979 “ “ “ Finger............................
330d 6979 “ “ “ “ Screw.................
1207d 6979 “ “ “ Hinge Screw
..................
59787 6979 “ “ “ Support..........................
641c 6979 “ “ “ “ Set Screw.
39455 0979 “ “ “ Wire
39456 6979 “ “ “ “ Clamp
..........................
..............
1302n 6979 “ “ “ “ “ Screw.
62139 6997 Throat Plate..........................................................
59799 6997 “ “ Needle Guard
208e 6980 “ “ “ “ Screw
691F 6990 “ “ Screw
59790 6997 “ “ Thread Retainer
............................
................
.......................
.......
206e 7024 “ “ “ “ Screw...
17872 6994 Trip Lever............................................
1196c 6998 “ “ Hinge Screw
17873 6994 “ “ Spring
1182b 7027 “ “ “ Screw
...................................
............................................
.................................
17874 6987 Tripping Point...................................................
190d 6990 “ “ Screw......................................
18
LIST OF PARTS COMPLETE
FOR
MACHINE No. 114-23
FOR TACKING PAPER TICKETS ON CLOTHING. MAKES SIX
CROSS STITCHES, INCLUOING THE FASTENING STITCH.
THE WORK HOLDING CLAMP VIBRATES UP THE ARM
INSTEAD OF ACROSS.
NO. TLATK NAME
*62295
-----
Arm with 4449, 124606 and two 164e. . .
16532 6976) “ Dowel Fin......................................
4418 6976 “ Oil Tube for inUu-inediate bearing ,
56015 6976 “ “ “ “ oiling 59705 and ,59706
S80e 6998 “ Screw..............................................
59702 6975 “ Shaft (horizontal)
17703 6981 “ “ “ Bushing (back) .
50333c 6998
1520b 6994 Arm Shaft (horizontal) Bushing (back)
*4449
59703 6976 “ “ “ Gear with two
----
Adjusting Screw
Adjusting Screw Nut
Arm Shaft (horizontal) Bushing (front).
1036c
........................................................
....................................
.......................................
................................
FAirrS FOR MACHINE No. 114-23
N4). PLATE NAME
l(Ki6c ()97() Arm Shaft (horizontal) Gear 8et Serew .
59704 6976 “ “ (upright).........................................
59705 ()976 “ “ “ Bushing (lower). . .
448c 6992 “ “ “ “ “ Set
59706 6976 Arm Shaft (upright) Bushing (upper). . .
448c 6992 “ “ “ “ “ Set
59707 6976 Arm Shaft (upright) Gear (lower) with
]2,53c 6976 Ann Slmft (umight i Gear (lower) Set
5970S 6t)76 Arm .Shaft (upnghi i Gear (uppei) with
1253c 6i)76 Arm .Shid't (upjighl) Gear (upper) Set
121674 7020 .\rm Side Cov(‘r
lOOn 69i)0 “ “ ■“ Screw
18498 6975 Belt Cover
5979,5 6977 “ “ Bracket with 18lE and 59796
184 E 6998 “ “ “ Screw Stud
59796 7019 “ “ “ Stud
217u 6998 “ “ Serew.............................................
39222 6977 “ .Shifter
39223 6976 “ “ Clamp............................................
12551) 6976 “ “ “ Screw'
124616 7029 (’lamp w'ith 1220b and 17928
17927 7029 “ Arm with 17714 and 63788
17710 7026 “ “ Hinge Plate
117(0 7026 “ “ “ “ Serew
63788 7015 “ “ Hook
59710 6979 “ Lifter
176n 7(Ю9 “ “ Screw.........................
124677 7019 “ Locking Device Latch with 704j .
704 j 7019 “ “ “ “ Clamping
121678 7020 Clamp Locking Device Latch Shaft
124679 7019 “ “ “ “ “
124680 7019 Clamp Locking Device I.atch Shaft
1282c 7019 Clamp Locking Device Latch Shaft
1282c 7019 Clamp Locking Device Latch Shaft
2269 6994 Clamp Locking Device Latch Shaft
Screw
........................................................
Screw.........................................................
two 12,53c.................................................
Screw.........................................................
two 1253c..................................................
.Sci'ew.......................................................
...............................................
........................................................
.....................................................
....................... ........................
Screw.........................................................
Crank.........................................................
Cnink Connection
Crank Connection Hinge Screw (low'er)
Crank Connection 1 linge Screw (upper)
Crank Pin...................................................
.................................
.................
............................
.........................
...................
.........
.................................
....................
...........................................
................
.....................................
19
20 PARTS FOR MACHINE No. 114-23
NO. 1‘LATE NAME
17928 7000 Clamp Position Stud
17712 7001 “ Pressure Spring
...........................................
.....................................
17713 7026 “ “ “ Riaeket..................
11771) 7026 “ “ “ “ Screw..
17711 7026 “ “ “ Guide Rloek. .. .
1178J 7026 “ “ “ Screw
1220e 7000 “ Screw Stud
1656j 7000 “ Thumb Nut
............................................
............................................
....................
124647 Clamp complete, Nos. 165(ij, 17927 and
124646
......................................................
*62101
62102 6980
742f 6980
1547i) 6980
---------
Cloth Plate
....................................................
“ “ Guide Block (left).........................
“ “ “ “ “ Sere w
Nut.
62103 6980 Cloth Plate Guide Block (right).
3021 6980
190d 6990
62104 6980
26770 t)980
62105 6975 Cloth Plate complete, Nos. 742e, 1547d,
*62177 ---------
62189 7032
62108 6981
62190
------
‘ “ “ “ “ Rivet. .
‘ “ Screw
‘ “ Stoi)
‘ “ “ Rivet
26770, 62101 to 62104 and two 3021.
Cylinder
............................................
......................................................
..................................
........................................................
“ Bottom Cover......................................
“ End Cover
.....................................
“ “ “ 62108 with 1034d,
62111 to 62113, 62185, 62189 and four
1477d...........................................................
62185 6980 Cylinder End Cover Bracket
62111
62114
59711
59712
6980
1477d 6980
62112 6980
1477n 6980
6980
62113
1034d 6980
6980
286o 6980
6981 Face Plate, .
U U
if ii
ii ii ii
К ii
и ii
i(
i( ii
— Face Plate complete. Nos. 208d, 9544,
9545, .59711 and two each 229n, 2107
and 9543
164i) 6990 Face Plate Screw...............................................
((
ii
ii
**
“
u
Top Cover
...................................................
........................
“ Hinge Pin.
“ Screw
..............
Hinge........................
“ Screw
Spring
................
.......................
“ Screw
................
Thumb Screw
2107 6980 “ “ I'hrcad Guard .........................
229u 7027 “ “ “ “ Screw
9543 6980 “ “ “ Nipper Disc
..............
...............
9,544 6980 “ “ “ “ “ Cover..
...........
PARTS FOR MACHINE No. 114-23
NO. PLATE NAME
208i) 6980 Face Plate Thread Nipper Disc Covet
Screw.........................................................
9545 6980 Face Plate Thread Nipper Disc Spring .
124648 7031 Feed Cam with two 1192c, six each 190d,
17874, 124652 and twelve 335j
...............
18415 6987 Feed Cam Driving Worm with 1441c
and 1442c
..................................................
1442c 6987 Feed Cam Driving Worm Position Screw
1441c 6987 “ “ “ “ Set Screw
----------
17797 6977 “ “ “ “Wheel with
453c
...........................................................
3012 7019 Feed Cam Driving Worm Wheel Pin
153c ()987 “ “ “ “ “ Sot
Screw.........................................................
18384 7019 Feed Cam Pin
1192c: 6987 “ “ Set Screw
,59728 6989 “ “ Shaft
..............................................
........................................
...........................................
16.53c 6999 “ “ “ Nut.......................................
124649 7029 “ Plate.....................................................
*1844.5 6989 Feed Plate Carrier Bar......................................
62123
--------
“ “ “ “ 18445 with 934j,
1094f, 1195e, 17743, 18368, 62118,
62119, two 55300 and four 17806
............
1246.50 7032 Feed Plate Carrier Bar Guide.............................
190j 6990 “ “ “ “ “ Screw....
.59730 6987 “ “ “ “ P i v о t В1 о c к
50306c 6987 “ “ “ “ “ “
Screw.........................................................
18368 6987 Feed Plate Carrier Bar Plate
...............................
934j 6987 “ “ “ “ “ Screw
62118 6985 “ “ “ “ Position Plate
with 17741.................................................
62119 6985 Feed Plate Carrier Bar Position Plate
Cover
.........................................................
1094p 6985 Feed Plate Carrier Bar Position Plate
Screw
.........................................................
55300 6985 Feed Plate Carrier Bar Position Plate
Steady Pin..................................................
17741 6985 Feed Plate Carrier Bar Position Plate
Stud............................................................
16,54c 7027 F’eed Plate Nut.................................................
17806 7027 “ “ Position Stud
.................................
1195e 7027 “ “ Screw Stud.....................................
17742 7032 “ Regulator with 1953.................................
124651 7032 “ “ Bracket with 17732 and
two 160d....................................................
8934—3
21
____
22 PARTS FOR MACHINE No. 114-23
PARTS FOR MACHINE No. 114-23 23
NO. PL.\TK NAME
*17732 Feed Regulator Bracket Cap
UiOr> ()998 “ “ “ “ Screw
8589 7019 “ “ “ Dowel Pin
1177d 7026 “ “ “ Screw
....................
...........
..........
.................
17744 6987 “ “ Hinge Stud................................
17743 6987 “ “ Post.........................
1953 7019 “ “ Roller and Screw Stud
with 1655c and 14017
..............................
1655c 6985 Feed Regulator Roller and Screw Stud
Nut............................................................
14017 6985 Feed Regulator Roller and Screw Stud
Nut Washer...............................................
1190c 6987 Feed Regulator Stop Screw
17745 6987 “ “ Swivel
1191d 6987 “ “ Thumbscrew
..............................
....................
..........
59731 6990 Knife................................................................
62124 6975 “ Bar with 62130 and two 3021 ....
62125 6990 “ “ Cap...................................................
164d 6990 “ “ “ Screw
....................................
62126 6990 “ “ Connection with 17917..............
190d 6990 “ “ “ Screw
17915 6990 “ “ “ Slide Block
17917
--------------
“ “ “ “ “ 17915
.....................
............
with 17916................................................
17916 6990 Knife Bar Connection Slide Block Stud.
59734 6990 “ “ Driving Lever with 223p and
59735........................................................
1382f 6998 Knife Bar Driving Lever Hinge Screw
1681c 6999 “ “
Nut............................................................
59735 6990 Knife Bar Driving Lever- Lock Stud
223f 6990
Screw........................................................
62127 6990 Knife Bar Guide..............................................
1235f 6990 “ “ “ Screw
..................................
8734 7015 “ “ Retaining Spring........................
62192 7015 “ “ “ “ Bracket...
62128 6990 “ Holder with 59739
62129 6990 “ “ Cap with 59739
.................................
.........................
691f 6990 “ “ “ Screw...............................
59739 6990 “ “ “ Stud
62130 6990 “ “ Connection
3021 6980 “ “ “ Rivet
59739 6990 “ “ Stud
236f 6990 “ Screw
.....................................................
.................................
............................
.........................
.......................................
62298 7027 Looper with 34418.............................................
•59742
--------
“ Collar
............................................................
NO. PLATE NAME
59743 6991 Looper Driving Shaft...........................................
62131 6991 “ “ “ Bushing
...................
52045 6992 “ “ “ “ Packing
(cotton)
......................................................
1148c 7015 Looper Driving Shaft Bushing Set Screw
59745 6991 “ “ “ Collar with two
465c
...........................................................
465c 6991 Looper Driving Shaft Collar Set Screw..
59746 6991 “ “ “ Coupling with two
50150c
.......................................................
50150c 6991 Looper Driving Shaft Coupling Set Screw
59707 6976 “ “ “Gear with two
12530.........................................................
59747 6992 Ijooper Driving Shaft Gear Cover
....................
190n 6990 “ “ “ “ “ Screw.
1253c 6976 “ “ “ “ Set Screw....
59748 6991 “ “ “ UniversalJoint.. ..
.50150c 6991 “ Set Screw
...............................................
59749 6989 “ Shaft with 50150c and 59742...
62197 7015 “ “ Ball with two 624c
62132 6991 “ “ “ Connection with 59752
*59752
and two 171e
-----
Looper Shaft Ball Connection Cap
.............................................
171e 6991 “ “ “ “ “
Screw.........................................................
62133 6991 Looper Shaft Ball Connection Stud
(eccentric)
.................................................
1095f 6991 Looper Shaft Ball Connection Stud Cap
Screw.........................................................
1259c 6991 looper Shaft Ball Connection Stud Set
Screw...........................................
.............
624c 6991 Looper Shaft Ball Set Screw.........
59745 6991 “ “ Collar with two. 465c
465c 6991 “ “ “ Set Screw.......................
59746 6991 “ “ Coupling with two 50150c.
50150c 6991 “ “ “ Set Screw
62134 6991 “ “ Slide Block............................
62135 6991 “ “ “ “ Cap
..................
1186c 6991 “ “ “ “ “ Screw....
34418 6991 “ Washer...........................................
62299 7020 Needle Bar with 1072f
*39203 6992 “ “ Connecting Link
62283
-----
“ “ “ “ 39203 with
.......................................
.....................
377c, 1518b and 2052...............................
377c 6992 Needle Bar Connecting Link Hinge
Screw.........................................................
....
.....
.....
21
PARTS FOR MACHINE No. 114-23
PARTS FOR MACHINE No. 114-23
25
NO. PLATE NAME
1518e ()992 Needle Bar Coimeeting Link Hinge
Screw Nut..................................................
2052 6992 Needle Bar Connecting Stud with 155<;.
155c 6992 “ “ “ “ Bet Screw.
59757 6)992 “ “ Crank Wheel with 448c and
1293c.........................................................
1293c 6992 Needle Bar Crank Wheel Position Screw
448c 6992 “ “ “ “ Set Screw
..............
124603 7019 “ “ Thread Retainer Bracket
with 460c
............................................
460c 7019 Needle Bar Thread Retainer Bracket
Set Screw
..................................................
42348 7019 Needle Bar Thread Retainer Disc
(inside)......................................................
10106 7019 Needle Bar Thread Retainer Disc
(outside)....................................................
10107 7019 Needle Bar Thread Retainer Disc Spring
93c 7019
Screw.........................................................
124604 7019 Needle Bar Thread Retainer Threail
Guide.........................................................
124605
------
Needle Bar Thread Retainer complete,
Nos. 93c, 10106, 10107, 42348, 124603
and 124604................................................
62300 7019 Needle Guard
124601 7019 “ “ Cam with two 465c
465c 6991 “ “ “ Set Screw
...................................................
..................
......................
2273 7027 “ “ Pin.........................................
59760 6989 “ “ Shaft
.....................................
59761 6993 “ “ “ Collar with two 465c
465c 6991 “ “ “ “ Set Screw...
124602 7019 “ “ “ Crank with 51812
and two 465c.............................................
51812 6993 Needle Guard Shaft Crank Roller and
Stud
...........................................................
465c 6991 Needle Guard Shaft Crank Set Screw.. .
59763 6993 “ “ “ End Bearing
59764 6989 “ “ “ “
Bracket......................................................
2022 7027 Needle Guard Shaft End Bearing
Bracket Dowel Pin....................................
9G5d 6993 Needle Guard Shaft End Bearing
Bracket Screw...........................................
1480h 6993 Needle Guard Shaft End Bearing Cap
Screw
.
59765 6993 Needle Guard Shaft Spring
.......................................................
.............................
NO. PLATE NAME
59766 6993 Needle Guard Shaft Spring Collar with
624c...........................................................
624c 6991 Needle Guard Shaft Spring Collar Set
Screw.........................................................
233i) 6995 Needle Guard Shaft Spring Screw
...................
1072k 6993 “ Set Screw...............................................
2058 6989 Presser Bar........................................................
17841 6992 “ “ Collar with two 196p
196f 6992 “ “ “ Set Screw
.................
....................
17842 6992 “ “ Guide Bracket with 453c. . .
453c 6987 “ “ “ “ Set Screw...
124681 7020 “ “ Lifting Lever
........................
121606 7020 “ “ “ “ Bracket...........
164e 6990 “ “ “ “ “ Screw
1201i) 7(K)6 “ “ “ “ Hinge Screw..
17845 7032 “ “ “ “ Rod.................
17846
------
“ “ “ “ “ Chain...
8414 6989 “ “ Spring.....................................
17941 6977 Pulley (loose) 2% in. diam...............................
17848 6977 “ “ Bushing.................................
22()9 6994 “ “ “ Position Pin....
1202i> 6998 “ “ Cap Screw
............................
17942 6977 “ (tight) 2Ls in. diam, with 2269. .
2022 7027 “ “ Pin.........................................
17955
-----
Pulleys complete, Nos. 1202n, 1206c,
17853 6994
1262c 6998
1662c 6999
17886 7032
17854 6994
17855 6994
124697
---------
62136 6977
62159
---------
17848, 17854, 17941 and 17942
Starting Lever................................................
“ “ Hinge Screw
“ “ “ “ Nut...................
“ “ Pitman.....................................
Stop Cam.......................................................
“ “ Interlocking Rod. . M
“ “ “ “ Case
“ “ “ “ “ 124697
with 59771 and two 193d,
Stop Cam Interlocking Rod Case 62136
.............
...........................
......................
................
........................
with 1318d, 17855, 17863, 17864,
59769 6977
62186
---------
39222, 39223 and two 1255d
Stop Cam Interlocking Rod Case Bracket
Stop Cam Interlocking Rod Case Bracket
...................
complete. Nos. 1182e, 1196c, 1204e,
1254c, 1262c, 1508e, 1662c, 17853,
17859, 17861, 17862, 17872, 17873,
59769, 62159 and two 898n......................
62137
--------
Stop Cam Interlocking Rod Case Bracket
62186 with 39343, 39344 and two 1186d
26 PARTS FOR MACHINE No. 114-23
PARTS FOR MACHINE No. 114-23
27
NO. PLATE NAME
21828 6976 Slop Cam Interlocking Rod Case Bracket
Dowel Pin
.................................................
50372d 7015 Stop Cam Interlocking Rod Case Bracket
Screw
........................................................
1204n 6998 Stop Cam Interlocking Rod Case Hinge
Screw
........................................................
17859 6977 Stop Cam Interlocking Rod Case Socket
Joint...........................................................
898d 6998 Stop Cam Interlocking Rod Ca.so Socket
Joint Cap Screw
........................................
39343 6981 Stoj) Cam Interlocking Rod Case Spring
(Hat)..........................................................
430c 6994 Stop Cam Interlocking Rod Case Spring
Adjusting Screw
.......................................
1520e 6994 Stop Cam Interlocking Rod Case Spring
Adjusting Screw Nut
................................
39341 6994 Stop Cam Interlocking Rod Case Spring
Bracket with 430c and 1520b...................
1186n 6991 Stop Cam Interlocking Rod Case Spring
Bracket Screw...........................................
17861 6994 Stop Cam Interlocking Rod Case Stop
Stud...........................................................
1254c 6998 Stop Cam Interlocking Rod Case Stop
Stud Screw Bushing
.................................
1508e 6999 Stop Cam Interlocking Rod Case Stop
Stud Screw Bushing Lock Nut.................
17862 6994 Stop Cam Interlocking Rod Case Stop
Stud Spring
...............................................
59771 6994 Stop Cam Interlocking Rod Case Wear
ing Block...................................................
193d 7027 Stop Cam Interlocking Rod Case Wear
ing Block Screw........................................
17863 6994 Stop Cam Interlocking Rod Spring
.................
17864 6994 “ “ “ “ Stop..............
1318d 6994 “ “ “ “ “ Screw.
3012 7019 “ “ Pin...................................................
1206c 6994 “ “ Screw..............................................
2102 6995 Tension Disc.......................................................
1560c 6995 “ Regulating Thumb Nut
........................
50148c 6995 “ Screw Stud............................................
42336 6995 “ Spring
13915 6995 “ “ Bushing
10145 6995 “ Thread Guide
..............................................
.............................
...............................
124609 7027 Thread Controller Sleeve................................
124007 7027 “ “ Spring............................
124608 7027 “ “ “ Collar with
1477f
........................................................
NO. PLATE NAME
1477e 6980 Thread Controller Spring Collar Set
Screw.........................................................
124610 7027 Thread Controller Stud with 56549 and
124631
......................................................
*124631
56549
124611
------
Thread Controller Stud Collar
--------
“ “ “ “ Pin
.........................
457c 7027 “ “ “ Set Screw
------
Thread Controller complete, Nos. 124607
...............
................
to 124610...................................................
*124612
*124613
-----
Thread Nipper (lower) Blade
------------
“ “ “ “ Carrier
.....................
with 124619...............................................
124614 7028 Thread Nipper (lower) Blade Carrier
124613 with 124612 and two 6037....
665j 7028 Thread Nipper (lower) Blade Carrier
Cap Screw
.................................................
124615 7028 Thread Nipper (lower) Blade Carrier
Hinge Stud.................................................
6037 7028 Thread Nipper (lower) Blade Rivet. . . .
124652 7032 “ “ “ Cam
335j 7027 “ “ “ “ Screw
124653 7020 “ “ “ Connection
....................
..........
.........
124618 7028 “ “ “ “ Ex
tension
......................................................
99k 7028 Thread Nipper (lower) Connection Ex
tension Hinge Screw. . ............................
206j 7024 Thread Nipper (lower) Connection Ex
tension Screw
............................................
124619 7028 Thread Nipper (lower) Connection Hinge
Stud............................................................
124620 7020 Thread Nipper (lower) Drivin^^Arm... .
8554 7019 “ “ “ “ “ Pin
124621 7020 “ “ “ Lever with 237k . ..
8554 7019 “ “ “ “ Pin
237k 7009 “ “ “ “ Set Screw...
124623 7020 “ “ “ “ Shaft
*124682 7020 “ “ “ “ “ Bracket
1177J 7026 “ “
Screw.........................................................
1743d 6979 Thread Nipper (upper) Adjusting Thumb
Nut.............................................................
59773 6995 Thread Nipper (upper) Body
.....................
624c 6991 “ “ “ “ Set Screw
59774 6995 “ “ “ Cam with two
50150c
..................................
....................
......
..
28
PARTS POR MACHINE No. 114-23
29
NO. PLATE
50150c 0991
2921 ()995
12102 0995
62169 6979
59775 0995
1527d 0995
59776 0995
13538 6995
13539 6995
13640 0995
2020 0995
59777
-----
59778 ------
124625
------
42808 6979
62171 6979
337d 0979
62172 6979
124626 7019
39453
330d
1207d
59787
641c
39455
39450
1302i)
208e
001F
17872
1190c
17873
I1S2e
17874
190n
6990
(i979
0979
0979
(5979
()979
6979
()979
0979
(>979
7024
7024
0980
0990
0994
0998
0994
7027
6987
6990
69 li.'
39452
124627
12462S
NAME
Tlircad Nipper (upper) Cam Set Screw..
“ “ “ Disc
.....................
“ “ “ “ Guide Pin.
“ “ “ “ Spring. . . .
“ “ “ Eyelet........................
“ “ “ Lock Nut
..............
“ “ “ Stud with 13538.
“ “ “ “ Position Pin
“ “ “ “ Roller
..........
“ “ “ “ “ Pin..
“ “ “ “ Spring
..........
Thread Nipper (upper) Stud complete,
Nos. 13539, 13540 and 59776
.................
Thread Nipper (upper) complete, Nos.
1,5271), 17431), 2020, 59773, .59775,
59777, 02109 and two 2921
Thread Take-uj) Body with 02172
“ “ Roller
“ “ “ Cap
.....................
...............
..............................
......................
“ “ “ “ Screw.............
“ “ “ Pin
........................
Thread Tnkc-up complete. Nos. 337n,
42808, 02171 and 124625
Thread Take-up Screw
“ Wi|K;r Body
.........................................
........................
.................................
“ “ “ Finger........................
“ “ “ “ Screw
“ “ “ Hinge Screw
“ “ “ Support
.....................
“ “ “ “ Set Screw.
“ “ “ Wire
“ “ “ “ Clamj)
..........................
.....
“ “ “ “ “ Screw.
Throat Plate with 124615
“ “ Needle Guard
“ “ “ “ Screw
“ “ Screw
.............................
............................
...............
........................................
Trip Lever..................................................................
“ “ Hinge Screw
.................................
“ “ Spring............................................
“ “ “ Screw
................................
Tripping Point...............................................
“ “ Screw
.....................................
.....
.....
LIST OF PARTS COMPLETE
FOR
E3767
MACHINE No. 114-24
FOR TACKING PAPER TICKETS ON CLOTHING TO DISTINGUISH
LOT, COLOR, SIZE, ETC., WHILE IN THE PROCESS OF
MANUFACTURE. 'MAKES A TRIANGULAR SHAPE TACK,
CONSISTING OF THIRTEEN STITCHES, y¡ IN. ACROSS
THE BASE AND in. FROM THE APEX TO TIJE BASE.
FITTED WITH IMPROVED THREAD CONTROLLING MECH
ANISM AND THREAD NIPPING DEVICE TO HOLD THE
END OF THE THREAD UNTIL THE FIRST STITCH IS
MADE; ALSO AN IMPROVED THREAD CUTTER THAT
LEAVES A LONG END TO UNRAVEL THE THREAD IN
DETACHING THE TICKET. SUPERSEDES 114-22 MACHINE.
NO. PLATE NAME
*62295 -------- Arm with 4449, 124606 and two 164e. ..
10532 6970 " Dowel Pin
4448 6976 “ Oil Tube for intermediate bearing .
50015 0976 “ “ “ “ oiling 59705 and 59706
880b 6998 “ Screw
59702 6975 “ Shaft (horizontal).....................................
17703 t)981 “ “ “ Bushing (back)
................................................
.......................................................
Loading...