SINGER 114-21 User Manual
rorm 18309
November, 1928
PRINTED IN U. a. A
LIST
OF
PARTS
MACH IN E No. 1 14 -21
THE SINGER MANUFACTURING COMPANY
OopriucHT, U. S. A., 1917, 1922, 1924 and 1928,
BY The SINGEB MAtroFACTUHING Co.
All Rights Reserved for all Countries
INDEX
PAGE
Accessouies............................................................................................ 16
Foot Lifter Chain Guide..................................................................... 17
“ “ Parts.................................................................................... 17
Machine No. 114-21.................................................................................. 7
Numerical List OF Parts.................................................................... 21
Starting 1-EvER................................................................................. 18
Table Belt Guide
Thread Unwinder............................................................................... 18
.................................................................................
18
INSTRUCTIONS FOR ORDERING
In orili^riiii' from this list, use ONLY the part NUMBER
in the FIJtiST cohiinn.
The nuni!)cr stamped on a SewiiiR Machine part is in every
case the niimher of the single part only.
Every conil>fnation of parts sent out as such has its specific
nuinhcr, whi(di, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the S.VME P.\RT in whatever
list it ai)])cars, or for whatever machine.
'I’he letters after some of the numbers indicate the style of
finish onlv, as follows;
A-
-Hardened, Polished, Nickel Plated and Buffed
- Polished, Nickid Plated and Buffed
li
-llurdened Only
C
Polished Only
V)
Soft, Not Polished
E
1'
-Hardened and Polished
- Blued
11
-Nickel Plated Only
■b
Hardened and Nickid Plateil
K
-Brass Plated
L
-Oxidized
,M
-JapaniK'd
1>
-.Mei'lizisI
R
-(^op))er Plated
T-
-Hardened, Poli.shed, ('upper and Nicked Plated
T. A.-
T. B.
r. .1.
T. K.
T. M.
T. L.
'I'he.se letters.MIJST BE USED when they ap)>ear in the list;
and AEd'l'lR the number as in the list.
In this series:
d'he figures in tlie second cohmm refer only to the plates,
Jllustrating the jiarls, and are NOT TO BE USED in ordering.
Parts marked with an tislerisk (*) are furnished only when
repairs are made at factory.
and Huffed.
-Co|)|)er and Nickel Plated and Polished.
- (lopiier and Nickel Plated Only.
-Hardened, Oo|)p(a- and Nickel Plated.
-('oppm- Plated and Oxitlizt'd.
-(dopp(;r and Brass Plated.
- Zinc Plateil
tJ
- Silver Plated
-I’olished and Nickel Plated
w
-Chromium Plated
z-
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to bSOO and 51501 to 51800 are Nut Numbers.
I,SOI to L’OOO and 51801 to 52000 are Roller Numbers.
2001 to 50000 and ,52001 and upward are numbers of
Machine Parts.
LIST OF PARTS COMPLET
FOR
MACHINE No. 114-21
FOR TACKING BANOS AND BOWS ON FELT OR STRAW HATS.
MAKES FIVE STITCHES, INCLUDING THE FASTENING
STITCH; HAS DOUBLE PRESSER FOOT, HINGED SO THAT
EITHER SIDE CAN BE THROWN OUT FOR CONVENIENCE
IN TACKING THE BOWS. FIHED WITH IMPROVED THREAD
CONTROLLING MECHANISM AND THREAD NIPPING DEVICE
TO HOLD THE END OF THE THREAD UNTIL THE FIRST
STITCH IS MADE.
NO. I’LATE N.AMB
♦62201
------
Arm with 4449, 124793 and two 164e. . . .
10532 ((976 " Dowel Pin .....................................................
4448 0970 “ Oil Tube, for intermediate hearing. . .
5(i015 (i970 “ “■ “ “ oiling ,59705 and 59700
880ic <)074 “ Screw.............................................................
,59702 9073 “ Shaft (horizontal)
17703 9002 “ “ “ Bushing (back)
50333<; 9074
Adjusting Screw
1520i'i 9075 Arm Shaft (horizontal) Bushing (back)
Adjusting Screw Nut
♦4449 9002 .Ann Shaft (horizontal) Bushing (front). . .
59703 0970 “ “ “ Gear with two
1036c..............................................................
..........................................
.............................................
......................................
PARTS FOR MACHINE No. 114-21
PARTS F'OR MACHINE No. 114-21
PLATE
NO.
1030c 0970
59704
0i)70
5i)705 ti!)70
448c 09i)2
5970ti t)070
448c 0002
Arm Shaft (horizontal) Gear Set Screw... .
“ “ (upright)
“ “ “ Bashing (lower)
“ “ “ “ “ Set
Screw
...............................................
Ann Shaft (upright) Bushing (upper)
“ “ “ “ “Set
NAME
.....................................................
.......................................
.................
Screw..............................
0970
59707
1253c (>070
59708 t)97l)
1253c 0071)
Arm Shaft (upright) Gear (lower) with
two 1253c
.......................................................
Arm Shaft (upright) Gear (lower) Set
Screw
...............................................
-4rm Shaft (ui)rigl)t) Gear (upper) with
two 1253c
.......................................................
.'\rm Shaft (upright) Gear (u))per) Set
Screw.............................................
124074 9002
lOOi) 0074
18408 0073
59795
184 F 0074
597<)0
217i)
39222
03071) 0002
1255n 1)070
*02202 —
02203 90ii3
330i)
622t)4
02205
licit Cover...........................................................
iKHi.'i
0002
t)074
9003
“ “ Bracket with 184e and 59790
“ “ “ Screw Stud
“ “ “ Stud
“ “ Screw..........................................................
“ Shifter............................................................
“ “ Clan)))
“ “ “ Screw
...............................................
..........................................................
........................................................
.......................................................
Cylinder..............................................................
0078
<)003
—
“ Hotloin ('over'
“ “ “ Screw...................................................
“ Knd Cover
“ “ “ 02204 with 1034d,
...........................................
................................................
6220ti, ()22(M) to t)2208 ami four
14771)............................................................
i)002
02200
02111 i)0t)2
1177n 9074
02207 i)0()2
1477i> 0074
02208
1034i>
124939
(Cylinder End Cover Bracket
“ “ “ “ Hinge Pin..
“ “ “ “ Screw................................................
“ “ “ Hinge...................................................
“ “ “ “ Screw................................................
0002
9074
“ “ “ S))iing
“ Screw
(Ю03
............................
.................................
................
........................................................
124940 Face Plate eom|)lete. Nos. 208n, 392e,
442c, 1550c, 0544, 0515, ()22U, 02212,
124030, two 0543 and lliicc each 220i>
and 2107.........................................................
lOOu 0074 Face Plate Screw (lower)........................................
104d 0074 “ “ “ (upper)
....................................
NO. Р1.АТБ NAME
2107 0002 Face Plate Thread Guard
................
229i) 0074 “ “ “ “ Screw
02211 9002 “ “ “ Nipper Disc
.
02212 9002 “ “ “ “ “Cover
392f, 9071 “ “ “ “ “
Screw
02213 9002 Face Plate Thread Nipper Spring
..............................................................
.
857p 9074 “ “ “ “ “ Screw..
9543 9002 “ “ “ Retainer Disc
.........................
9544 9002 “ “ “ “ “Cover
208i> 0074
Screw...............................................................
9545 9002 Fac(i Plate Thread Retainer Disc Spring
02215 9073 Feed Cain with two 1192c, seven each
lOOu, 17874, 124038 and fourteen 335«
18415 0004 Feed Cam Driving Worm with 1441c and
1442c
..............................................................
14 12c OOtil Feed tiam Driving Worm Position Screw..
1441c 0004 “ “ “ “ Set Screw
..................
17797 90()3 “ “ “ “ Wheel with 453c
3012 0002 “ “ “ ‘ “ Tin
...........
453c i»074 “ “ “ “ “ Set Screw
18384 9002 “ “ Pin..................................................
1102c t)074 “ “ Set Screw
.............................................
02155 9005 “ “ Shaft.................................................
1053c 0075 “ “ “ Nut
............................................
124941 0070 “ Plate..........................................................
022'.)2 i)005 “ “ Carrier Bar
02203
------
“ “ “ “ 02292 with 199d
....................
............... . .
¡md 02222.......................................................
02204 9001 h'eeil Plate Carrier Bar Plate
231f 9074 " “ “ “ “ Screw
...................................
................
lOOi) 0074 “ “ “ “ Screw..........................
23If 9074 “ “ Screw..................................................
17742 t)005 ■■ Regulator with 1953...................................
02221 9005 “ “ Bracket with 17732 and
two lOOi)........................................................
*17732
----
Feed Regulator Bracket Cap......................................
lOOi) 9074 “ “ “ “ Screw
8580 0004 “ “ “ Dowel Pin
005i) t)074 “ “ “ Screw
17744 0004 “ “ Hinge Stud
02222 0004 “ “ Post
.....................................
........................................
...............
....................
...........................
1053 0004 “ “ Roller and Screw Stud
with 1055c and 14017.....................................
1055c OOtil Feed Regulator Roller and Screw Stud
Nut
..................................................................
.
.
PARTS FOR MACHINE No. 114-21
11
N4). FI. ATE
14017
9064
1190c 9074
9064
17745
1191d 9071
62266
9066
602i) 9074
e2‘2t)7 9066
76i) 9075
62268 90t)6
62269 9065
92n
62270
9075
90f)4
lOOn 9075
124654
124655
9064
9064
1380i) 9064
13291) 9074
124656
9064 “ (ui)per).........................................................
36634
9064
503161) 9075
62226
9064
190i) 9074
62227
9073
62125
9064 “ “ Cap (back)
1387c 9064
62126
9060
190i) 9074
17915 9060
—
17917
17916
9060 Knife Bar Connection Slide Block Stud
59734
59735
1382f
1681c
223 k
90f)6
9075
9075
9066
9060
124748 9060
62192
9066
62229
9067 “ Lever
62230 9004
4604 9004
50130c 9075
194c 9064
NAME
h’eed Regulator Roller and Screw Stud
Nut Wa.sher....................................................
Feetl Regulator Stop Screw
“ “ Swivel
........................................................
“ “ Thumb Screw
................................
............................................
Guide...................................................................
“ /Vdjusling Screw
.........................................
“ Holder..........................................................
“ “ Hinge Screw..............................................
“ “ Lock Spring
Hat Su])port
“ “ Hinge Screw
..............................................
........................................................
...............................................
“ “ Lock............................................................
“ “ “ Screw
.......................................................
Knife (lower) with 124t)55 and two 1380i>
“ “ Thread Guard
“ “ “ “ Screw
............................................
...................................................
“ “ Screw.........................................................
“ “ Friction Wa.sher........................................
“ “ Hinge Screw..............................................
“ “ Spring........................................................
“ “ “ Screw......................................................
“ Bar................................................................
.................................................
“ “ “ “ Screw
...................................................
“ “ Connection with 17917.. . .
“ “ “ Screw......................................................
“ “ “ Slide Block... .
“ “ “ “ “ 17915
with 179И)......................................................
“ “ Driving L(;ver with 223k and
59735..............................................................
Kuife Bar Driving Lever Hinge Screw
Nut.....................................................
Knife Bar Driving Lcvi-r Гак-к Stud
............
.................
“ “ “ Set
Sca-ew
............................................................
Knife Bar Retaining S|)ring
“ “ “ “ Bracket
...............................................
...........................
...............................................
“ “ Block
“ “ “ Rivet
“ “ Hinge Screw
.......................................................
.......................................................
..............................................
“ “ Si.Tf'w Stud ..............................................
NO. VI.ATB NAME
62298 9067 Looper with 34418......................................................
*59742 --------- “ Collar...................................................................
50150c 9074 “ Set Screw
62231 9073 “ Shaft with 50150c and 59742
62131 9067 “ “ Bushing (back)
....................................................
..............
......................
62285 - — “ “ “ “ 62131 with
52045
..............................................................
447c 9074 Looper Shaft Bushing (back) Set Screw. . .
62233 9067 “ “ “ (front)
124694
------------
“ “ “ “ 62233 with
52045
..............................................................
......................
447c 9074 Looper Shaft Bushing (front) Set Screw...
52045 9067 “ “ “ Oil Pad (cotton)... .
59745 9067 “ “ Collar with two 465c...................
465c 9067 “ “ “ Set Screw
59707 6976 “ “ Gear with two 1253c
59747 6992 “ “ Cover
............................
...................
....................................
190i) 9074 “ “ “ “ Screw.........................
1253c 6976 “ “ “ SetScrew...............................
34418 9067 “ Washer.........................................................
124942 9069 Needle Bar
*39203 9067 “ “ Connecting Link
62283
----------------
“ “ “ “ 39203 with
377c, 1518e and 2052
...................................
.............
.....................................
377c 6992 Needle Bar Connecting Link Hinge Screw
1518e 6992 “ “ “ “ “ . “
Nut............................................................ ■ • ■
2052 6992 Needle Bar Connecting Stud with 155c....
155c 6992 “ “ “ “ SetScrew ...
62235 9068 “ “ Crank Wheel with 446c and
1293c...............................................................
1293c t)992 Needle Bar Crank Wheel Position Screw. .
446c 9067 “ “ “ “ SetScrew
....................
124943 90t)8 “ “ Thread Nipper...................................
1329f 9074 “ “ “ “ Screw
62271 9067 “ Ouaixi (back) with two 465c
......................
.................
62272 9067 “ “ “ Cam with two 465c
465c 9067 “ “ “ “ SetScrew ...
4t)5c 9067 “ “ “ Set Screw
62236 9067 “ “ “ Shaft
.........................
.................................
62238 9067 “ “ “ “ Bushing
447c 9074 “ “ “ “ “ Set
Screw...............................................................
59761 9067 Needle Guard (back) Shaft Collar with
two 465c..........................................................
465c 9067 Needle Guard (back) Shaft Collar Set
Screw...............................................................
...
12
PAirrS FOR MACHINE No. 114-21
PARTS FOR MACHINE No. 114-21
13
NO. PLATE
62273
2273 9076
1816
62239 9068
62274
190d 9074
904e 9074
62275 9068
17841
196k 6992
17842
453c
17813
121793
164k,
12011)
17845
39408
17846
62240
38468 9068
62241 9070
62243
62245
1175i)
62242 9070
2081)
702c 9070
62246
190i) 9074 lh'es.s(‘r Foot Screw ..........................................
57 Id 9074
15391) 9079
63975 9071
17848
2269
1202 It
17942
2022
17955
Needle Guard (hack) Shaft Crank with
9067
9067
9068
6992
6992
9074 “ “ “ “ Set Screw. . . .
9069
9068
9074
9075
9069
—
—
9069
9070
9070
9070
9070
9070
9068
9068
9079
9071
9068 “ “ Pin ............................................................
—
1816................................................................
Needle Guard (hack) Shaft Crank Pin. . .
“ “ “ “ “ Roller
and Stud
Neetlle (.¡iiard (hack; Shaft Crank Spring
“ “ (front) ......................................................
“ “ “ Screw.....................................................
“ Set Screw
Presser Bar..........................................................
“ “ Collar with two 196k
“ “ “ Set Screw
“ “ Guide Bracket with 453c. . , .
“ “ Lifting Lever............................................
“ “ ‘‘ “• Bracket
“ “ “ “ “ Screw
“ “ “ “ Hinge Screw..,
“ “ “ Rod........................................................
“ “ “ “ “ 17845 with
17846
.............................................................
Presser Bar Lifting Lever Rod Chain. . . .
“ “ S()iiiig (Hat).............................................
“ “ “ Stud
“ Foot (hack)
“ “ (front).......................................................
“ “ Bracket.....................................................
“ “ Hinge Scri'w
“ “ Spring
“ “ “ Sen‘w
“ “ 81 o{) Sennv............................................
Presser Foot (M)iiipiete, Nos. (>‘2241, (V2243,
02245 and two each 20Si), 702e, 1175d
and ()2242.......................................................
Pressure Regulating Thumh Screw
“ “ “ “ Lock
Nut..................................................................
Pulley (loo.s(') 2).i in. diam
“ “ Bushing.....................................................
“ “ “ Position Pin............................................
“ “ ('a}) Scr(nv
“ (tight) 2?8 in, diam., with 2269...
Pullf'ys cornpleU*, Nos. 1202r, 1206c,
17S4S, 17854, 17042 and 63975
NAME
..........................................................
...................................................
...............................
..............................................
.............................................
.......................................................
.................................................
............................................
......................................................
....................................................
....................
................................
..............................................
....................
NO. Pt.ATE N.AME
17853 9072 Starting Lever
1262c 9075 “ “ Hinge Screw
1662c 9075 “ “ “ “ Nut
17886 9071 “ “ Pitman
17851 9072 Slop Cam
17855 9072 “ “ Interlocking Rod
124784 9071 “ “ “ “ Case
124785
124905
_______
---------
62159 --------- Stop Cam Interlocking Rod Case 124905
59769 9071 Stop Cam Interlocking Rod Case Bracket
(52186
--------
(52137
21828 6976 Stop Cam Interlocking Rod Case Bracket
50372n 9074 Stop Cam Interlocking Rod Case Bracket
1204e 9072 Sto() Cam Interlocking Rod Case Hinge
17859 9072 Sto|) Cam Interlocking Rod Case Socket
898o 9071 Sto[) Cam Interlocking Rod Case Socket
39343 9071 Stoj) Cam Interlocking Rod Cose Spring
50682c: 9072 Sto]) Cam Interlocking Rod Case Spring
1520k 9075 Stoj) Cam, Interlocking Rod Case Spring
39344 9072 Stop Cam Interlocking Rod Case Spring
1186k 9074 Stoj) Cam Interlocking Rod Case Spring
17861 9072 Stoj) Cam Interlocking Rod Case Stojj
1254c 9074 Stop Cam Interlocking Rod Case Stop
“ “ “ “ “ 124784
Stop Cam Interlocking Rod Case 124785
Slop Cam Interlocking Rod Case Bracket
------
Stop Cam Interlocking Rod Case Bracket
.........................................................
................................
..........................................
................................................................
with 59771 and two 193d
with 63976 and two 1255n.............................
with 1318d, 17855, 17863, 17864 and
39222
..............................................................
complete. Nos. 1182e, 1196c, 1204e,
1254c, 1262c, 1508e, 1662c, 17853,
17859, 17861, 17862, 17872, 17873,
59769, 62159 and two 898d
62186 with 39343, 39344 and two 1186f
Dowel Pin
Screw
Screw
Joint
Joint Cap Screw
(fiat)................................................................
Adjirsting Screw.............................................
Adjusting Screw Nut
Bracket with 1520e and 50682c
Bracket Screw.................................................
Stud.................................................................
Stud Screw Bushing........................................
.......................................................
..............................................................
..............................................................
................................................................
...............................
......................................
......................
..........................
................
...............................
...........................
..............
.....................
14
NO.
ri.ATE
1508 k
9075
17802
9072
59771
9072
193i> 9074
17863 9072
17804 9072
1318d 9074
3012 9002
1200c 9075
2102
<Ю70
1500c
9070
50148c 9070
42330
9070
13915 9070
10145 9070
124009
124007
9070
9070
124008 9076
1477 k
124892
9074
9070
124900 — —
32519 9070
9074
457c
424893 9t)7ti
124894
*124032
•124033
124034
—
—
9076
124015 9070
124635
124030
665j
9070
9070
9074
898d 9074
PARTS FOR MACHINE No. 114-21
NAMK
stop Cam Interlocking Hod Case Stop
Stud Screw Bushing Lock Nut
.......................
Stop Cam Interlocking Rod Case Stop
Stud Spring
.........................
Stop Cam Interlocking Rod Case Wearing
Block
............................
Stop Cam Interlocking Rod Case Wearing
Block Screw..........................
Stoj) Cam Interlocking Rod Spring
“ “ “ “ Stop
......................................................
....................
" “ “ “ “ Screw..
“ “ Pin
................................
“ “ Screw
'I'ension Disc
.........................................................
..................................................
“ Regulating 'rhumb Nut
..............................
“ Screw Stud.................................................
“ Spring
........................................................
“ “ Bushing...................................................
“ Thread Guide
.......................
'I'hread Controller Sleeve
“ “ Spring
......................................................
“ “ “ C 011 a r w i t h
1477k
...........................
'I'hread Controller Spring Collar Set Screw'
“ “ St ud wit h 32519
....................................
“ “ “ 124892 with 124893
“ “ “ (5)ilur Bin
.............................................
“ “ “ Set Screw..............................................
“ “ Tlirend Onid<‘
........................................
'I'hread Controller crympleto, Nos. 124607
to 124609 and 124900
'I'hread Nipper (lower) Blade
....................................
.............................
“ “ “ “ Carrier with
124637
.....................
'I'hread Nipper (lower) Blade Carrier
124633 with 124632 and two 6037
................
'I’hread Nijiper Xlower) Blade Carrier
Hinge Stud
...............
'I’hread Nipper (lower) Blade Carrier
Hokler with 124615 .
'I'hread Nip])er (lower) Blade Carrier
Holder Cover
...........
'I'hread Nipper (lower) Blade Carrier
Holder Cover Screw'
'I'hread Nipper (low'er) Blade Carrier
Holder Screw..................
PARTS FOR MACHINE No. 114-21
124(i:i7 9071) Thread Nipper (lowr
()l):i7 >)07h
124(i:iS 9077
:s:i5j 9074
124li:i9 9077
121010 9070
1701) 9071
Screw..............................................................
2270 9070 'I'hread Nipper (lower) Connection Cap
Steady I’in.......................................................
124041 9077 Thread Nipper (lower) Connection Exten
sion (back)
......................................................
99c 9075 Thread Nipper (lower) Connection Exten
sion (hack) Hinge Screw.................................
217i) 9074 Thread Nipper (lower) Connection Exten
sion (back) Screw
r24()42 9077 Thread Nijiper (lower) Connection Exten
sion (front)......................................................
501 111) 9075 I'hread Nipper (lower) Connection Exten-
•s/on (front) Hinge )Screw..............................
12404:1 9077 Thread Nipper (lower) Driving Arm.........................
8554 9077
124021 9077
8551 9077
2)17 к 9077
12102:1 9077
124024 9070
‘ “ “ “ “ Pin.
‘ “ “ Lever with 2.37k .
‘ “ “ “ Pin
‘ “ “ “ )Set Screw .
‘ *• “ “ Shaft
‘ “ “ “ “ Bracket.
1177.1 9074
Screw
1500c 9070 'I'hread Nip|>er (upper) Adjusting Thumb
Nut..................................................................
02251 9078 'I'hread Nipper (upper) Body......................................
447c 9t)74 “ “ “ “ Set Screw
59774 9078 “ “ “ Cam with two
50150c
50150c 9074 Thread Nipper (upper) Cam Set Screw . .
9076
2102
<K)78
32572
223 F
13540
9078
9078
9078
9078
9066
9078
9078
9078
'I'hread Nipi>er
62252
50106c
13710
62253
13539
62254
............................................................
u u
a u
44
“ “ “ Stud
4 4 44
44 4 4
44 44
Nos. 13539, 13540 and 02253.
er) Blade Carrier Stud
“ Rivet
...............
Cam
.........................
“ Screw
.................
Connection...............
“ C a i>
...........................................
.......
......
“ Disc
................................
“ Releasing Disc...
“ “ Pin
...............................
“ ¡Screw )Stiid
..................
“ Spring.............................
................................
“ “ Position Screw
“ “ Roller
..........................
“ “ “ Pin...
(upper) )Stud complete,
15
U) PARTS FOR MACHINE No. П4-21
ACCESSORIES 17
NO. PLATE NAME
57076 1)07S 'I’lirpiul Nipper (iipiier) Tbrpiiil Guide .. . .
62255
------
'I'lireiul NipiKU- (ui)per) complete, Nos.
22Нр, ISOOc, 111710, 32572, 50106c,
57076,62251, 62252, 62254 and two 2102
124625 9078 Thri^id Take-ii]) Body wiUi 62172
42808 9078 “ “ Roller
62171 9078 “ “ “ Cap
337p 9078 “ “ “ “ Screw'
...........................
...................................
.........................
...............
62172 9078 “ “ “ Pin...........................
124026 9078 Thread 'Гаке-up complete. Nos. 337n,
42808, 62171 and 124625
..............................
691F 9074 'riirea<l 'Гаке-up Screw...........................................
17872 9070 'I'np Lever...............................................................
1196c 9075 “ “ Ilinge Screw...................................
17873 9078 “ “ Spring
1182e 9074 “ “ “ Screw
.................................................
.....................................
17874 9078 'I’lipping Point........................................................
190n 9074 “ “ Screw
124946 9079 Vibrating Prcsser Bar
..........................................
.................................................
124917 9078 “ “ “ and Pace J’late
'rhread Nijjper Spring Bracket with
124948
857f, 1096k and 1258c
------
Vibrating l’res.scr Bar and Pace, Plate,
..................................
'I'hread Nipper Spring Bracket complete,
No.s. J410f, 124946, 124947 and 124949
1258c 9078 Vibrating Bresser Bar and Pace Plate
Thread Nipper Spring Bracktd Set
Screw..............................................................
1410.1 9078 Vibrating I^rc.sser Bar Cap Screw
......................
190d 9074 “ “ “ Screw..........................
124949 9079 “ “ “ Spring
1096f 9078 “ “ “ “ Screw
........................
................
133f 9074 “ “ “ StO() Screw for
62201..............................................................
442c 90()8 Vihi'ating Presser Bar Stop Screw for
124940.................................................
..........
1735u 9075 Vibrating Prcs.ser Bar Stop Screw Lock
Nut for 62201
......................................
..........
1550c 9068 Vihratiug Presser Bar Slop Screw Lock
Nut tor 124940.....................................
ACCESSORIES
NO. I’LATE NAME
18419
------
Cylinder Base Plate with two 453c. . ,.
18420 7006 “ “ “ Hinge Connection.
NO. PLATE NAME
18423 7006 Cylinder Base Plate Hinge Connection
Hinge Pin
........................................................
453c 9074 Cylinder Base Plate Hinge Connection
Hinge Pin Set Screw
.......................................
18424 7005 Cylinder Base Plate (hinged) complete.
Nos. 18419, two each 18420, 18423, three
wood screws 1)4 'n. No. 12 and four
134i>...............................................................
134i) 7006 Cylinder Base Plate Screw,.
120346 7007 Oiler (copper plated) with 120347
120347 7007 “ Spout, 9 in. long
.....................................
..........................
............................................
11831 7007 Screw Driver (large)................................................
26026 7007 “ “ (small)
.............................................
10875 7007 Wrench for 1518, 1520 and 1662................................
17905 7007 “ “ 1681.................................................
27662 7007 “ “ 1254 and 1508.................................
FOOT LIFTER PARTS
NO, PLATE
17876 7005
17877 7005
17878 7005
17879 7005
161» 9074
17880 7005
17881 7006
443c 9074
17882 7006
17883 7005
17884
------
17885
------
FOOT LIFTER CHAIN GUIDE
PLATE
NO.
65883
65884 9079
65885
9079
2461 9079
—
'Preadle with 443c
“ Pitman Rod (lower)
“ “ “ (upper)..........................
“ “ “ Clamp with two 101»
“ “ “ “ Screw
Treadle Pitman complete, Nos. 17877 to
17879
..............................................................
'Preadle Shaft.......................................................
“ “ Set Screw
“ Spring..................................................
“ Stand...................................................
'Preadle complete, Nos. 17876, 17881 to
17883 and two wood screws 1 in. No. 10
'Preadle and Pitman complete. Nos. 17880
and 17884........................................................
Chain Guide Bracket
“ “ Pulley
“ “ “ Pin.......................................
Foot Lifter Chain Guide complete. Nos.
2461, 05883, 65884 and four wood screws
1 in. No. 10 R. H. O. and A
NAME
...............................................
..............................
...................
......................................
NAME
...........................................
...............................................
............................
18
THREAD UNWINDER
19
STARTING LEVER
NO.
l‘L.\TE NAME
18851
50804
50805
17881 7000
17882 7000
17888
17884 Trcadh'. complete, Nos.
17870
443c 9074
7007
7000
7005
7005
('hain, 4() in. to 5.5 in.
and 50805
Note: When ordering No.
Cliain Hook (large)
“ “ (small)
Treadle with 448c
.......................
length required
.......................
...............
“ Shaft
............................
“ “ Set Screw
“ Spring.........................
“ Stand
...........................
178S:i iuid two wood .-screws 1 in. No. 10
long, witli 56804
18851
.............
17871
, give
i, 17881 to
TABLE BELT GUIDE
NO. I’i-ЛТК NAME
li921H 700Г) Hell (Juidi; with two 108e.......................................
U)8e 9074 “ “ Sot Sto't'w
17892 7007) lirncko! witli two 152e
17892 7007) Pulley
29219 7007» Shaft (Knig') with 1789t) and (»2972
02972 90(>9 “ “ “ Wiek (braided e(»tIon)
29220 7007) “ “ (.short) will» 1789ti and 02974
02974 90(»9 “ “ “ Wiek (hraidial cotton)
1789() 7000 “ “ Plufi
17)2i': 9071 “ “ Set Screw
29221
------
....................................................................
4'аЫе li(2t (liiide complete, Nos. 17892,
29219, 29220, two each 17892, 29218
and thnui wood scnnvs 1 kj in. No. 12 . .
..........................................
.............................................
.................................................
.........................................
175e 7000
208e 9074
60773
8523
7000
—
7006
8523
7234
Note:
_
___
225391
00771
00772
41035
201090j 9079
225392
225393 9079
225394 8523
27739 7234
225390
Thresul Guide
Thread Unwinder corniilete, Nos. 201G90J,
202-190, 225888, 225889, 225891, 225892
and tliree wood screws in. No. 12. . .
Thread Cone (wood) for large cone.s
“ “ Holder, for inverted cones .
Nos. 27739 and 225390 are used with,
hut not included in, 225394
Thread Unwinder with ddircad Guide com
plete, Nos. 60772 and 225394
..............................
“ 00771 with 41085
“ Bracket with 175e
“ “ Set Screw
“ Lock Nut ..........
“ Rod witli 208e and 225393
“ “ Screw..
“ “ Washer.
....................
....................
..................
............................
...................................
.............................
.................
........................
THREAD UNWINDER
FOR ONE LARGE SPOOL OR ONE LARGE CONE
OF THREAD
NO. N.4.ME
225.'iS9 Sn'dd Sjxiol HesI with 201018('
225888 8528 " " Rod..................................................
200888c 0071 “ “ “ Set Screw...............................
201018c 0071 “ ■' Set Screw.......................................
202-100 8528 S(nml with 200888c...............................
.......................................
18300 —2
Loading...