Page 1
Form 8878
Januaryi 1917
PRICE LIST
OF
PARTS
MACHINES Nos. 114-1,
114-2 and 114-20
THE SINGER MANUFACTURING COMPANY
Page 2
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows;
A.
Hardened, Polished and Plated
B.
Polished and Plated.
C. Hardened only.
D.
Polished only.
E. Soft, not Polished.
G.
II. Blued.
J. Plated only.
K. Hardened and Plated.
T n.-u
M. Oxidized.
P.
Japanned.
These letters MUST BE USED when they appear in the list,
and AFTER the number as in the list.
In this series
I to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
Page 3
10 TAUTS FOR MACHINE NO. 1 M-1
NO, I’LATIC NAMK EACH
39222 6977 Reit Shifter..............................................................$ 2.5
39223 6976 “ “ Clamp
1255i) 6976 “ “ “ Screw
3923S 3747 Button Clamp (left) with 9311 and 17723 1 00
39239 3747 “ “ (rifilit) witii 931 1 and 17723 1 00
39240 3747 “ “ Arm with 1771! and 17714 3 00
17710 6978 “ “ “ Hinge Plate
11761) 6978 “ “ “ “ “ Screw... 04
17711 6979 “ “ “ Hook
117510 6978 “ “ Hinge Screw
.59710 6979 “ “ Lifter
190i) 6990 “ “ “ Screw
39241 6978 “ “ Preasure Spring
17713 6978 “ “ “ “ Bracket 1 00
11771) 6978 “ “
Screw
........................................................................
17714 6978 Button Clamp Pressure Spring (luide
Block......................................................................... 15
1178i) 6978 Button Clamp Pressure Spring Screw. . . . 06
39242 6‘.t78 “ “ Spreader
1//1/ on/o
50237k 6979 “ “ “ “ Hinge
Screw
........................................................................
118ÜI) 6979 Button Clamp Spreader Lever Locking
4'liuml) Screw........................................................ 08
»>.<<■. .J'.iLL'.Jll VliUM'i k 1UI . w*. -.............................................. cz.
Thumb Screw Washer
1182k, 6978 Button Clamp Siireader Screw
39243 6978 “ “ “ S))ring
207k 6978 “ “ “ “ Sere w 02
7071 6990 “ “ “ “ “
Washer
.....................................................................
17720 6979 Button Clamp Spreader Steady Pin
39244 3747 “ “ Sijring (left) for flat
l>utton.s................................................................... 25
30245 3747 Button Clamp Sjiring (right) for flat
buttons
.....................................................................
39246 6978 Button Clamp Spring (left) for stud baek
buttons...................................................................... 35
39247 6978 Button Clami) Sjfring (right) for stud baek
buttons
.....................................................................
229i) 6978 Button Clani]) Si)ring Screw
9311 3747 “ “ “ Steady Pin. per 100 10
39248 0979 “ “ Stop with two 17720
11,831) 6979 “ “ “ Screw
17723 0979 “ “ Stud
..............................................
.....................................
...........
35
......................
.......
04
.........
1 00
10
................................
.......
50
.......
40
........................................
...........................
..................................
...........
...............................
..................
....................................
...................................................
25
04
03
04
02
01
02
05
01
01
25
35
02
75
04
05
Page 4
12 PARTS KOR MACHINE NO. 114-1
NO. I'l,.vni NAMK EACH
IfiAOc (1982 Feed Across Connection Adjusting Stud
Nut (right)
02110 0982 Feed Acros.s Knuckle Joint
17728 0982 “ “ “ “ Connection 1 00
llSlE 0982
Hinge Screw
AO?!.'! 0984 Feed .\cros.s Lever with 1185c and 50150c 3 50
17730 0982
.......................... Hall Stud
1185c 0982 “ “ “ “ “ Set Screw... 03
.59714
------
I’eed Across Lever complete, Nos. 59713,
.59715 and .59721 ............................................. 6 00
.59715 0983 Feed Across Lever Extension with 1952
and .51814
59710 0983 Feed .Across Lever Extension Disengaging
Eccentric
59717 0983 Feed Across Lever Extension Di.sengaging
E(a:entric Connection
999d 0983 P'oed Across Lever Extension Disengaging
Eccentric Connection Hinge Screw. ... 05
.59718 0983 Feed .Across Lever Extension Disengaging
193n 0983 Fe.(sl Across Lever Extension Disengaging
Eccentric ( lonnection Spring Screw... 03
238n 0983 Feed .Across Lever Extension Disengaging
Eccentric Connection Stop Screw
.......................................................
..................................
...............................................
07
...............................
............................................................
.....................................................
............................
60
40
...........
$ 03
1 00
30
02
2 50
E(u;entric Pin
...........................................
01
.59719 0983 Fec(l Across Lever Extension Disengaging
Eccentric Shaft
.........................................
10
.59720 0983 h'ecd Across Lever Extension Disengaging
Handle.......................................................... 25
2273 0983 heed Across Lever Plxtcnsion Disengaging
Handle Pin.................................................. 01
.51814 0983 Feed Across Lever Extension Guiding
Roller and Serew Stud
...........................
25
,59721 0983 l'’ecd .Aero.s.s Lever Extension Hinge Pin 03
.501,51)0 0991 “• “ “ “
Set Screw..................................................... 02
.59722 0984 Feed .Across Lever Extension Position
Ann......................................................................... 1 50
2022 0983 Peed .Across LevcT lixtension Position
.\rm Pin
......................................................
01
.59723 0983 Feed Acro.ss Lever Extension Position
.Ann Supiiort............................................. 50
! Kill) 0983 Feed Across Lever lOxtension Position
.\riii Support Screw
................................
05
Page 5
M
PARTS POR MACHINE NO, 114-1
NO. PLATI-:
50728
U)5:ic 1)909
59720 1)988
1702:!
18415
1)2123
50730 0987
50301)d
1831)8
034d 1)987
11)54(; 0988
17801) 0988
1105k 0988
17742 1)984
1)2117
*1 'TTOH
11)1)1) 0998
8589 0088
1177d 1)078
17714
17713
I iJOiJ
11),55c
14017 0085
1190c
17745
noil)
59731 0990
1)2124 0975
1)2125
11) Id 0001)
1)2121)
lOOi) 0090
7071
17015 0900
17917
17911) 0090
59734 0991)
NAME EACH
1)989 Feed Cam Shaft
0988
0089 l'’eed Plate Carrier Bar...................................
—
0987
0987
0984
—
0987
0987
0985
0987
0987
0087
0990 “ “ Cap...............................................................
0091)
“ “ “ Nut
“ Plate (thick)
“ “ (thin) for round bottom
buttons...............................................................
“ “ “ “ 18445 with 934i),
1094k, 1105e, 17743, 18308, 62118,
02119, two 7476 and four 17806
Feeil Plate Carrier Bar Pivot Block............
“ “ “ “ “ “ Screw
“ “ “ “ Plato......................................................
“ “ “ “ “ Screw................................................. 02
“ “ Nut................................................................
“ “ Position Stud
“ “ Screw Stud
“ Regulator with 1953...................................
“ “ Bracket with 17732 and
three lOOi).......................................................
¡A,jwj Rri'.i’kot Cmi)
“ “ •• ” ftcrow
“ “ “ Dowel Pin................................................
“ “ “ Screw........................................................
“ “ Hinge Stud
“ “ Post...............................................................
will) 1655c and 14017
Feed Regulator Roller and Screw Stud
Nut
......................................................................
Feed Regulator Roller and Screw Stud
Nut Washer......................................................
Fcol Regulator Sto]) Screw.............................
“ “ Swivel
“ “ Thumbscrew..............................................
K'nife......................................................................
“ Bar with 62130 and two 3021
“ “ “ Screw.......................................................
“ “ Connection with 17917
“ “ “ Screw
0900
“ “ “ “ Washer
..................................................
............................................................
..................................................
...............
..........................................
.................................................
..................................................
.................................................
...................................
..........................................................
................
.........................
.......................................................
................................................
“ “ “ Slide Block.............................................
--
__
“ “ “ “ “ 17015
with 17916
Knife Bar Connection Slide Block Stud, ,
........................................................
“ “ Driving Lever with 223k and
50735..................................................................
$ 1
.
80
10
15
15
1 00
4 15
40
10
04
05
02
2 00
5
1
1 40
10
00
50
03
04
30
50
45
04
05
02
70
08
40
75
25
04
75
03
01
25
40
15
Page 6
1()
I’AKTS I'OU MACHINIC NO. 114-1
I'LATK
IviO.
Loo])er Hliaft Eccentric Connection Stud
0991
10i)5i--
1250«: 0991
()24c 0991
()2i:i4 0991
()2i;i5 0991
118(io 0991
0991
34418
0989
597S(j
0992
39203
0992
377c
0992
151810
0992
2052
0992
155c
0992
59757
0992
1293c
jU40‘2
59758
0993
59759
l()5c
0991
2273
0983
0989
59700
¿)'J / v) 1
0991
405c
0993
59702
51812 0993
405c 0991
0993
59703
0989
59704
0983
2022
0993
9051)
MSOu 0993
59705
59700
0993
0993
024c 0991
233d 0995 Needle Guard Shaft Spring Screw
0993
1072f
Cup Screw........................................................H
Loopcr Shaft Eccentric Connection Stud
Set Screw..........................................................
l^ooper Shaft Eccentric Set Screw..............
“ “ Slide Block
“ “ “ “ Cap...................................................... 10
“ “ “ “ “ Screw
“ Washer
Needle Bur with 1072f
“ “ Connecting Link....................................
“ “ “ “ Hinge Screw 12
ii U ii <( (i
Nut......................................................................
Needle Bar Connecting Stud with 155c .
“ “ “ “ Set Screw.. .
“ “ Crank Wheel with 448c and
1293c..................................................................
Needle Bar Crank Wheel Position Screw.
“ “ “ “ Set Screw...........................................
“ (-aiTi with two 4(>5c
“ “ “ Set Screw
“ “ Pin
“ “ “ “ Set Screw. . . . 02
“ “ “ Crank with 51812
and two 405c
Needle Cuard Shaft Crank Roller and
Stud
Needle Guard Shaft Crank Set Screw. . . . 02
“ “ “ End Bearing
“ “ “ “ “ Bracket
Dowel Pin
Needle Guard Shaft End Bearing Bracket
Screw..................................................................
Needle Guard Shaft End Bearing Cap
Screw.................................................................. 07
Needle Guard Shaft Spring
“ “ “ “ Collar with
024o
Needle Guard Shaft S])ring Collar Set
Screw..................................................................
“ Set Screw
NAMK
..............................................
..............................................
.........................................................
............................
v iuiu u
......................................
.............................................................
...................................................
....................................................................
.........................................................
....................................................................
.....................................................
...............................
..............................................
........................................
..
............................
...............
KACii
04
03
03
1 50
04
01
00
40
04
25
03
75
10
03
75
02
01
00
80
20
1 50
50
01
04
10
15
03
02
02
Page 7
IS
NO. I’LA'ri'; NAM К KAi'H
HiCilli
i:iO(' 099 1
1Г)2()10 (КИИ
lilKill
1 ISiii'
17801 0991
12Г)4с 0998
IOOSk 0999
17802
59771
I’Ain'S l'4)R MACHINHi ¡S4). Ill 1
stop Cuin Interlocking Hod Case .Spring
0981
099 1
0991
0994
0991
Ulat)............................................................
Stop ('am interlocking Rod ('ase Spring
Adjusting Screw
Stoj) (’am Interlocking Rod Case S{)ring
Adjusting Screw Nut
Stop (.'am Interlocking Rod (’a.s(i Si>ring
Bracket witli 430c and 1520k
Slo|) Cain Interlocking Hod Case Siiriiig
Brack(‘t Screw
Slop Cam Interlocking Hod Case Stop
St lid...................................................................
Stop Cam Interlocking Hod Case Stop
Stud Screw Bushing......................................
Sto]i Cam Interlocking Hod Case Stop
Stud Screw Bushing Bock Nut..................
Stop Cain Interlocking Hod ('ase Stop
St lid Spring....................................................
Slop Cain Interlocking Hod Case Wearing
Block..................................................................
............................................
....................................
...............................................
...................
'
25
04
03
25
04
20
20
tm
05
75
17800
0991
17804
0991
i:il8i) 0991
‘><»1 О
iinev
1200c 0994
2102 0995 Tension J^ise.......................................................
1500c 0995
(Uiii.5
50M8c
42;«0
0995 “ Spring
13915 0995
10115 0995
59772 0995
0995
233i)
1743d 0979
0995
59773
024 c 0991
59774 0995
50150c 0991
2921 0995
12102 0995
02109 0979
59775 0995
0995
15271)
13538
0995
0995
59770
Block Screw.....................................................
Stop Cam Interlocking Hod Spring.............
“ “ “ “ Sto|).......................................................
“ “ “ “ “ Screw. .
U U |),,,
'■ “ Screw
“ Regulating Thumb Nut
“ “ Bushing
“ 'I'hread (liiide...........................................
'I’hread lOyelet (head of arm)......................
“ “ “ “ “ Set Screw. .
‘‘ Nipiier Adjusting Thumli Nut. . .
“ “ Body...........................................................
“ “ “ Set Screw..............................................
‘‘ ' “ Ckun with two 50i50c. . . .
“ “ “ Set Screw..............................................
“ “ Disc
“ “ “ Guide Pin
“ “ “ S])ring
“ “ Eyelet
“ “ Lock Nut
“ “ “ Position Pin.........................................
.........................................................
..........................
..........................................................
....................................................
............................................................
.............................................
...................................................
........................................................
..................................................
03
05
15
04
01
10
05
04
15
05
05
01
03
02
10
35
03
75
02
05
01
05
50
03
25
02
Page 8
■JO
,\(). I'l.A'I’i: NA.MK KACii
17S72 01)'.) I 'I'rip Ijcver...................................................................$ 80
1 ll)(i<- 01)1)8 “ “ Ilingii Screw
17870 01)1)1 “ “ Spring...................................................... OA
1182k 01)78 “ “ “ Screw.......................................... 02
17871 01)87 Point...................................................... 2A
IDOii OD'.IO “ “ Screw
PAR'l'S FOR MACHINE NO. lit 1
..........................................
.............................................
Oli
MACHINE NO. 114>2
FOR CLOTHING, SHIRTWAISTS, ETC. MAKES CROSSED STITCHES IM
FOUR HOLE BUTTONS, AND CAN BE ADJUSTED FOR TWO
HOLE AND BAR BUTTONS. MAKES TWENTY ONE
STITCHES INCLUDING THE FASTENING
STITCHES
T'lii.s .Macliim; i.s the same as No. 11 1-1 w ith the following
e.\<'e|>lioiis:
02101 0'J80 F’eial Cam with I 1112c, two each lOOu,
17871, 02128 anil four 20.Sn, in place of
021'22
..................................................................
*12 25
12
Page 9
21
PARl’S FOR MACHINE NO. 114-20
NO. i’LATK
1253c 697(1
(1975
18498
59795 6977
ISlE (1998
6988
5979(1
217f (1998
39222 (1977
39223 6976
I255d (1971)
(12140 7000
(12141 7000
(1978
1771(1
117(1d 6978
(12142 700(1
6979
59710
190i) 6990
7000
17928
17712
7001
(1978
17713
Í 177,.
6078
17714
11781) (1978
12201)
7000
7000
I05()i)
—
62113
*62101
—
62102 (1980
742f 6980
6980
1.5471)
(1980
62103
(1980
3021
190d 699(1
62104 698(1
698(1
2(1770
(1975
62105
62145
(12108
6211(1
(12110
—
7002
6981
—
6980
*62144
62111 (198(1
Ann Shaft (upright) Gear (upper) Set
Screw...................................................................S
Belt Cover................................................................
“ “ Bracket with 184e and 59796.
“ “ “ Screw Stud
..................................................
“ “ “ Stud..............................................................
“ “ Screw...............................................................
“ Shifter................................................................
“ “ Clamp.............................................................
“ “ “ Screw
Clamp with 1220e and 17928
“ Arm with 17714 and 62142
...........................................................
................................
...........................
“ “ Hinge Plate...................................................
“ “ “ “ Screw
......................................................
“ “ Hook..............................................................
“ Lifter................................................................ 1
“ “ Screw
............................................................
“ Position Stud...................................................
“ Pre.ssnre Spring
“ “ “ Bracket
ii U U U O,
“ “ “ Screw
“ Screw Stud
.............................................
......................................................
“ “ (jiuule Hlock
................................
.........................................................
......................................................
“ Thumb Nut......................................................
Clamp comt)lete, No.s. Iti5(lu, 62140 and
Cloth Plate............................................................... 1
‘‘ “ Guido Block (left)
........................................
“ “ “ “ “ Screw....
“ “ “ “ “ “ Nut
“ “ “ “ (ril5ld0
...................................................
“ “ “ “ “ Rivet,
per 10(1
...............................................................
Cloth Plate Screw
...................................................
“ “ Stop...............................................................
“ “ “ Rivet...........................................................
Cloth Plate cúmplele, Nos. 742f, 1547u,
26770, 62101 to 62104 and two 3021.. 2
---
Cylinder................................................................... 22
“ Bottom Cover
..............................................
“ I'lnd Cover...................................................
“ “ “ 621(18 with 10341),
6211(1 to 62113, ()2145 and two each
13451) and 14771).............................................. 2
Cylinder End (.'over Bracket................................
“ “ “ “ Hinge Pin..
N...ME E..CU
03
30
75
02
03
25
2
1
1
10
25
04
50
75
35
04
10
00
03
10
50
00
0-1
lb
(16
(14
10
50
5(1
(15
(13
25
25
(13
10
01
45
5(1
00
35
40
40
(11
Page 10
26 PARTS FOR MACHINE NO. I M-20
NO. PL.VI’E NAME EACH
1187e ()982 Feed Across Regulator Adjusting Stiul. . 22
K)7()C 6982 “ “ “ “ “ Nut 05
17788 6982 , “ “ “ “ “ “
17739 6982 Feed Across Regulator Adjusting Stud
11881)6998 Feed Across Regulator Hinge Screw
621,52 7001 “ “ “ Link
1189b 7001 “ “ “ “ Screw Stud,. 10
62153 7001 “ “ “ “Stud
62151 7003 “ Cam with 1192c, three each 190u,
18415 6987 Feed Cam llriving Worm with 1411c and
1442c 6987 Feed Cam Driving Worm Position Screw. 04
1441c 6987 “ “ “ “ Set Screw
17797 6977 “ “ “ “ Wheel with 453c 2 70
3012 6988 “ “ “ “ “ Pin 01
453c 6987 “ “ “ “ “ Set Screw 02
18384 6988 “ “ Pin
62155 7002 “ “ Shaft.................................................... 1 80
16f)3c 6999 “ “ “ Nut.................................. lO
393,58 7004 “ Plate.......................................................... .50
18445 6989 “ “ Carrier Bar
______
59730 6987 Feed Plate Carrier Bar Pivot Block 40
.5Ü306D 6987 “ “ “ “ “ “
18368 6987 Feed Plate Carrier Bar Plate
934d 6987 “ “ “ “ “ Screw
16,54c 6988 " “ Nut.............................................................. 04
17806 6988 “ “ I’osition Stud............................................. 05
1195e 6988 “ “ Screw Stud................................................. 02
62157 7002 “ Regulator with 1953
62148 7002 “ “ Bracket with 39310 and
*39310
-------------
IOOd 6998 “ “ “ “ Screw
85,89 6988 “ “ “ Dowel Bin
1177d 6978 “ “ “ Screw
47744 6987 “ “ Hinge Stud
17743 6987 “ “ Rost...................................... 50
1953 6988 “ “ Roller and Screw Stud
Washer................................................................ 05
Sleeve................................................................... 25
.............
..................
,50
................
17874, 62138 and six 208n............................ 13 35
1442c................................................................ 2 70
...............
..................................................
.. n n n 1 Ü ^ .1 n ...UK OQIi.
.............................................
1094f, 1195e, 17743, 18368, 62149,
62150, two 7476 and four 17806....................... 4 10
Screw........................................................................... 10
.........................................
..................
................................
three 160d
Feed Regulator Bracket Cap
.......................................................
..................................
....................
...............
..............................
.....................
■with 1655c and 14017............................................. 45
25
15
04
02
02
2 00
5 00
04
03
30
100
10
50
04
Page 11
28
PAH'l'S FOR MACriFNE NO. 114-20
NO. PLATE
50150c 0901
59707 097()
Loopor Driving Shuft Coupling Sot S(^rew
“ “ “ Gear witli two
NAME
1253c ..................................................................
0992
59747
190d 0990
1253c
59718 0991
50150c
02158
59745 0991
405c
59740 0991
50150c
59750
02132
59752
171 E
LoopcT Driving Sliiifl Gear Cover.......................
“ “ “ “ “ Screw..
0970 “ “ “ “ Set Screw... .
“ “ “ Universal Joint. .. .
0991
7002
“ Set Screw........................................................
“ Shaft with 50150c and 59742
“ “ Collar with two 405c
0991 “ “ “ Set Screw..................................................
“ “ Coupling with two 50150c..
0991
0991
0991
“ “ “ Set Screw
“ “ liccentric with two 024c. . .
“ “ “ Connection with
59752 and two 17Ik
—
Looper Shaft Eccentric Connection Cap
0991
U U U U ii
..................................................
............................................................
Screw...................................................................
02133 0991
1095f 0991
Eooi)er Shaft Eccentric Connection Stud
Looi)er Shaft Ecceidric Connection Stud
Cap Screw...........................................................
1259c 0991
4 iUlil 1 T
62134 0991
02135
1180c 0991
34418 0991
59750
39203
377c
1518k 0992
Looiier Shaft Eccentric Connection St\id
Set Screw.............................................................
.......
.
“ “ Slide Block
0991
“ “ “ “ “ Screw
“ Washer
..................................................
“ Cap
..................................................
...........................................................
0989 Needle Bar with 1072f...........................................
0992
“ “ Connect ing Link........................................
0992 “ “ “ “ Hinge Screw
“ “ “
Nut.......................................................................
0992 Needle Bar Connecting Stud with 155c. .
2052
0992 “ “ “ “ Set Screw,. .
155c
0992
59757
0992 Needle Bar Crank Wheel Position Screw.
1293c
0992 “ “ “ “ Set Screw
448c
0993
59758
59759 0993
405c 0991
0983
2273
0989
59700
0993
59701
“ “ Crank Wheel with 448c and
1293c
...................................................................
...............................................
“ Guard..............................................................
“ “ (.lain with two 405c
“ “ “ Set Screw
“ “ Pin
................................................................
....................................
..................................................
“ “ Shaft.............................................................
“ “ “ Collar with two 405c
___________
..................................
............................
EACH
S 02
75
15
03
03
40
02
50
15
02
25
02
1 00
1 00
03
04
03
1 50
40
04
01
60
40
12
04
25
03
75
10
03
1 25
75
02
01
00
15
Page 12
30 PARTS POR MACHINE NO. Ш-20
NO. l'L.\TK NAME EACH
G213(> 0)977 SI.OI) C:im Interlocking Rod Case with
59709 0977 Sto]> Cam Interlocking Rod t.lase Bracket 5 35
02137
----------
21828 0970 Stop Cam Interlocking Rod Case Bracket
S0307I) 0998 Stop Cam Interlocking Rod Case Bracket
1204e 0998 Stop Cam Interlocking Rod Case Hinge
17859 0977 Stop Cam Interlocking Rod Ca.se Socket
898i) 0998 Stop Cam Interlocking Rod Case Socket
on-rao oaoi
430c 0994 Stop Cam Interlocking Rod Case Spring
1520e 6991 Stoj) Cam Interlocking Rod Case Spring
59771 and two IOOf
Stop Cam Interlocking Roil Case Bracket
eomijlete, Nos. 1182e, 1190c, 1201e,
1254c, 1202c, 1:U8d, 1508e, 1002c,
17853, 17855, 17859, 17801 to 17804,
17872, 17873, 39222, 39223, 39343,
39344, 59709, 02130 and two each 898n,
1180e and 1255u
Dowel Pin................................................................... 05
Screw........................................................................... 06
Screw........................................................................... 10
Joint............................................................................. 50
Joint Cap Screw......................................................... 04
.
...............
(fiat)............................................................................ 25
Adjusting Screw
.........................................
................................................
.
........................................................
$ 4 00
14 25
04
39311 0991 Stop Cam Interlocking Rod Case Spring
Bracket with 430c and 1520e................................... 25
1180e 0091 Stop Cam Interlocking Rod Case Sjiring
17801 0994 Stop Cam Interlocking Rod Case Stop
1254c 0998 Stop Cam Interlocking Rod Case Stop
].508e 0999 Stoj) Cam Interlocking Rod Case Stop
17802 0994 Stop Cam Interlocking Rod Case Stop
59771 ()994 Sto|) Cam Interlocking Rod Case Wearing
193e 0983 Stop Cam Interlocking Rod Case Wearing
17S03 0994 Stop Cam Interlocking Rod Spring
17804 0994 “ “ “ “ Stop
1318d 0904 “ “ “ “ “ Screw.. 04
3012 6088 “ “ Pin............................................................... 01
1206c 6994 “ “ Screw
Bracket Screw............................................................ 04
Stud............................................................................. 20
Stud Screw Bushing
Stud Screw Bushing Lock Nut................................. 00
Sind S|)ring
Block.......................................................................... 75
Block Screw
..................................................
................................................................
...............................................................
...............................
..........................................................
20
05
03
15
10
..................
05
Page 13
:i'2
1‘ARTS FOR MACHINE NO. 114-20
NO. PI>ATK
02172 0979
t)217:i
Thrcud 4'ake-up Roller Pin...................................S
'Phreiid Take-up complete, Nos. 337d,
0979
42808, 02170 and 02171
0990 Thread 4'ake-up Screw..........................................
09 If
:i9ir)2 0979
394,50 0979
3301) 0979
12071) 0979
597H7 0979
041 c 0979
3945.5 0979
0979
39450
13021)
0979
02139
0997
59799 0997
14S4f 0997
09 If 0990
.597911 0997
MS If
0997
“ Wiper Body....................................................
“ “ “ Finger.......................................................
“ “ “ “ Screw.....................................................
“ “ “ Hinge Screw
“ “ “ Support
“ “ “ “ Set Screw. .
“ “ “ Wire..........................................................
“ “ “ “ Clamp.................................................... 10
“ “ “ “ “ Screw. .
I'iiroiit Plate............................................................
“ “ Needle Ouard..............................................
“ “ “ “ Screw.....................................................
“ “ Screw
“ “ 'I'hread Retainer
“ “ “ “ Screw......................................................
NAME
................................
............................................
....................................................
...........................................................
........................................
17S72 0994 'I'rip Lever..............................................................
17S73 0994
I1S2f 0978
17874
0987
191 In 0990
“ “ Spring.............................................................
“ “ “ Screw...........................................................
'I’ripping Point.......................................................
“ “ Screw..........................................................
EACH
03
75
04
50
50
02
04
20
03
10
02
2 25
50
03
04
75
03
80
05
02
25
03
Page 14
34 PROTECTOR
NO. 1‘I.ATE NAME EACH
1526) 7009 Rod Collar with 237e
237f 7009 “ “ Set Screw
39495 7009 “ Connection
1761) 7009 “ “ Screw................................................. 03
.................................................
...........................,...................
......................................
$ 15
02
.................. 40
1099f 7009 “ Screw Stud......................................................... 03
39496 7008 “ Sleeve
448c 7009 “ “ Set Screw
39497 7009 “ Spring............................................................. 05
15261 7009 “ “ Collar with 237f
237f 7009 “ “ “ Set Screw.
39198
----------
Protector (front of needle) complete, Nos.
.................................................................
.......................................
.........................
..................................
3 00
1099f, 39489, 39491 to 39497, 52598 and
two each 176n, 15261 and 50351n
...............
10 00
STARTING LEVER AND FOOT LIFTER PARTS
NO. I'l.ATB
17876 7005
17878 7005
17879 7005
16Id 6998
17880 7005
17881 7006
186p 6998
17882 7006
17883 7005
17884
------
17885
d'readle
“ “ “ (ui)])er)................................... 10
“ “ “ Clamp with two UUn 20
“ “ “ “ Screw
'Preadle Pitman complete. Nos. 17877 to
■■-•--0
Treadle Shaft.................................................................. 05
“ “ Set Screw
“ Spring........................................................ 10
“ Stand
Treadle complete. Nos. 186p, 17876, 17881
No. 10................................................................... 1 00
Treadle and Pitman complete, Nos. 17880
and 17884............................................................ 1 40
NAME EACH
....................................................................
'T'. 1 ' ! ..\ -J rv
.....................
....................... 40
...........................
........................................................
to 17883 and two wood screws 1 in.
$ 70
04
03
15
02
03
15
Page 15
30 STAND КОН KLECTUIC MOTOR
NO. PLATE NAME EACH
40016 7012 Starting Treadle complete, Nos. 487!),
40042 7012 Treadle Support.......................................................... 75
40043
------
780b 0998 Treadle Support Bolt with 1000b................................ 03
1000b 0999 “ “ “ Nut
25080 7012 Wrench for 780 and 1510
25283
----------
4881 to 4883, 40014 and 40015
“ “ 46642 with two 40016
and four 1177b
Stand (iron work) complete, for electric
motor, Nos. 25080, 4()013, 40043, two
each 780io, 25064 and four 500e
...................................................
...............................................
.........................
...................................
....................
$ 90
2 70'
02
10'
—
TRIMMINGS FOR STAND N0. 25283
NO. PLATE NAME EACH
02103 7012 Machine Base with wood screw 1 % in. No.
1385e, 27253 and four 134n
1385b 7011 Maidiine Ba.se Bolt with 1524b
........................
....................
$ 3 50
03
1524b 7011 “ “ “ Nut................................................ 02
27253 7011 “ “ “ Wa.sher........................................ 10
;:;4T;7iP; “ “ Screw 05
5970
----------
I’re.s.ser Bar lafting Lever Ch;un, length
20 in. to 35 in
Ni/rn: When ordering 5070 give length required.
(il39
------
Slartitig Lever Chain, length 30 in. to
45 in............................................................................. 20
Note: When ordering 0439 give length required.
02104 7011 Starting Lever Chain Pulley for 02103.. . 40
094 b 7011 “ “ “ “ Screw
40044 7012 'ГаЫе Sui)|)ort with three wood screws 1
in. No. 14
02105 7012 'ГаЫе Work Clamp........................................................ 50
200!)3 7012 “ “ “ Hanger with two wood
screws 1 in. No. 10
02100 7011 d'able Work Clamp Spring....................................... 20
02107 7010 “ “ “ “ Ann with 301c 25
301c 7010 “ “ “ “ “ Set Screw 05
02108 7010 “ “ “ “ Bracket with
two wood screws 1 in. No. 10
......................................................
....................
1 00
15
..............................................................
.............................................
...........................
Ю
30
75
Page 16
38
OBSOLETE PARTS
NO. PLATH NAMIO EACH
59741 6993 Loopcr with 34418, use 62162
1609d 6995 Tliread Nipper Adjusting Tlmuil) Nut for
59778.................................................................... 10
59786 6993 Tliread Tak(‘-up
59789 6993 Throat Plate Needle Guard, use 59799.. . 25
..............................................................
...................................
S (>0
30
Page 17
PLATE 3747—FULL SIZE
39238
39248
39239
39244
39245
Page 18
PLATE 6976-ONE-FOURTH SIZE
59702
18498
62124
Page 19
PLATE 6977-ONE-HALF SIZE
17859 62136
17941
Page 20
PLATE 6979-FULL SIZE
39248 1180 17717
17723 — 50237
17720
183
59787 39452 39455 17711
7718 330
39453
] fVs n
If
1207 1302 39456
641
62171 42808
743
337 62172
62169
Page 21
PLATE 6981-ONE-HALF SIZE
17843 39343
Page 22
PLATE 6983-FULL SIZE
59715 1952
1404 > 59721'
59723
59719
Page 23
PLATE 6985-FULL SIZE
1094
¥
7476
14017
62119
1655
1774
Page 24
PLATE 6987-FULL SIZE
18415
17743 1191
1190 59730
V
1442 1441
I i
453 1192
59724
17744 17745
50306
934
IT
18363
62138
17874
Page 25
PLATE 6989-ONE-HALF SIZE
59760 59749 2058 59756 18445
59728
8414
Page 26
PLATE 6991-FULL SIZE
59750
59743
SB
59748 59746 50150 465 59745
4Mi
pwi
Page 27
PLATE 6993-FULL SIZE
59758 59759 5975i
59762 51812 59766 965
59765
iMppililMlMiMMtMHIMMMMlfi
; ■:iii
59763
59786
1480 1072
59741
Page 28
PLATE 6995-FULL SIZE
501*48 2102 J560
59776 2026
10145
Page 29
PLATE 6997-FULL SIZE
62139
i
59799 59790 1484
Page 30
PLATE 6999-FULL SIZE
1653
1500
1600
Page 31
PLATE 7001-rULL SIZE
17712
1189
62153
62152
62150
Page 32
PLATE 7003—ONE-HALF SIZE
Page 33
PLATE 7005-ONE-F0UETH SIZE
59797
J7892 17880
Page 34
PLATE 7007-ONE-HALF SIZE
36565
10875 J183I 26026
Page 35
PLATE 7009-FULL SIZE
39492
1^1 237 52598 176
EH
¥
160
■IT
39495
I T
39497 50351 426 1099
H
I T
i
454 448 1(20
Page 36
PLATE 7011-FULL SIZE
62164
27253
A
134
1385
694
62166
1524
Loading...