SINGER 11-30 User Manual

Download

.IVf > ,

• U'Vi.' ; ,!i.

L^s ^ *f.«y » -i' >i’^'i '4-f <

v,vr-:v.%v

Kv» rt , f rfj ■; "* *•

L«-;>?;'^j: 1».^ ”>

' W"'t» >‘*t

I *’■-'* , • j ^

4 -%

^f=

■SS

,‘i; . 4

tt* - ?.V. ■

• x-r. •.•'*~^*='»

:^¥tk

1-r;

■ ■,r^*4'J.

V, V

t-*"

Ufi>

.i'

■

•''■‘'i "’i

■’ «^ ^

. •*;? '-*-^

Fo™ 19522

( 740 )

Printed U. S. A.

gi<>.

HISTORI^PtaL ooi •.'

DO NOT REMOVE

LIST

PARTS

SINGER

MACHINES

No. 11-30

THE SINGER MANUFACTURING COMPANY

♦*A Trade Work of THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

To ensure easy running and prevent unnecessary wear of the parts which are in movable contact, the machine requires oiling and when in continuous use, "TYPE B” or "TYPE D" OIL, sold by Singer Sewing Machine Company, should be

applied at least twice each day to all oil holes marked

"OIL", as instructed in Form 8261.

"TYPE D" OIL should be used when an oil is desired

which will produce a minimum of stain on fabrics, even after a long period of storage.

Apply a few drops of oil to the shuttle bearings in the

shuttle race each time a bobbin is replaced.

by The Singer Manufacturing Company

INSTRUCTIONS FOR ORDERING

-’"■1

In /lútii Uili; lint, u;.e ÜNLÍ the ^virt. NlMBtH In Uu>

yiHllT coliuiin,

riif' numbdi' :;t.unp<*d on a oowlng Machine Fart Is In evt.i'ii ' .i-jf

thi! nuii.ber of the nlngle ixii't only.

Fviry oonMtiallon of j)arts o' T.t out as surh h.is Its sp<->'lfi;: nimhPi', 'rvhl.'h, allhjugh noi sLamyed on the txii'Ls, must be us-J when ordering the < omblnstdori.

ll.Lch auir.ber' always iiulloates the SAfdK FART In whatever list

It appeal';', ot for whatev( r nuehlnc'.

The lettei.. al'ti'r ;a,nie of Uie number.'. Iridleat.e Ihfi style of

flnl.di uni;,', ae i'ail.yjs;

A-Hardethd, Foil died, Nlokel Flatcd, :uid Buffed A.A-BiuTt 1 and Jnr.,.nilurn f'latad A.B-Hurderied, Foll:,du-d, Buffed an-l Chri-mlum I’lated A.C-Bfi^wn Be.klng íiuireL Finish A.D-Gray Baking Fiumel Fini di A.F-Hardened, Bright. Hunililed and Nickel Flate-l A.F-H.irdened, Bright hunibled. Nickel FI.tie,!, Brlgiit Rumbled an J

Odu'c-mlum Plated

B-i'O 1 l.she 1 . N1 'kel Fiate) ,.in 1 Buffed

,-llardtneJ Uniy

d .K-Il.a .hrl'e 1 and Mei-Uzed

h-FolIshed hnly F-dOft, 11..1 Fullahüd I'-Har-len-ed arid F-ilshcd

F.J'll.ard.eiie.l, Follihej and Nickel Flatel

¡¡'Bright Kutv.bled ,md. tll.ki'l Plat.e.l H'B lue t J'NIrkfl Plat-'d i,^ily

K'H.arJetird and Nickel Fiate;!

l.'.Hrec:.; Flat.M M-lfxldlued N-Jaixinned, Dull P-Japuuu' d, Bright.

P.P-Wrlnkle Finish

R-tkrllaod B'dadmlum Plated T-Copper Plated

T.A-Hard-a T.S-i'uppei

T.J-c'opi-ei T.K-Hardeti T.l,-L'op(;..r T.M-Jop;

X.B-llardeni-d arti Black Oxide, fur Iron or Btei

Z.A-Hardened,Pol I shed,Nickel Plated,Buffed and Z.B-Pull.died, Nickel Plai.oJ, Buffe.1 and ChroiM Z.C-Hai'dent d and chromium Id.ated

Z,D-f’i'l Í. hed and Chi'omIurri riate.l Z.G-Brlghl l-Cuttibled, Nickel PlaUtd Z,J-Nlckel and t.’hi'omlum Plated Z.T'Coppei' and .'hromluin I‘l;ite-1

AITEH Ihe number a.; In the list.

Illustrât Ing the parts, ;ind are NOT ТО BE UJED Ih orlerlng.

repaies are rmidê ,tt Гас tory.

belween the G.iuge, as w< 11 as the Nurntu-r fc.i',.1 b-' gl.nn .'.n oriler.

■'I, Foil,she and Nick. 1 and Nlck.'l Fla

■d, eop[>ei' and. N1" .ind Dia..г Pl.lte ! FI.lie.1 ..nd ûxldlr

Il-dln- !'lal-4l V-Jl Ivor Phited w-Fcll;dieJ and Nickel Plated

X-Dlack Oxide, for Iron airi Btt'el

Y-BlacK Nickel Plated Only Z-i;hi\.i'iluJn Plated

The:;e leUera MldlT BE Uó'FD whe

In I.KI. seri-

The flgmes In the secotrl colujiin refci only te the plate:.,

Parti, inarktd wllh :m asterlsk (*) ata- furnl.d.ed only when

Wtien ciclerlng p.artci which dlffer as to (l.iuge (ihe distance

1 to IfOO, SCVdel to .hlnüü and Lb are Bcrew Number:,J.hul I... I.‘io0 and Í IhOl to hlckXJ are loul to ;.:ü(iü and :‘IoOl to ebOOi.) are PCXU I..1 ¡.i.iuOO and t :cKd to 1-uxkX) ai l:»OOüü are llrwlng Machine Fai'I..'

are ra.mLers of nectrlcal Parts.

Fiale.!

• .and Nickel FI., .nd. FolF.died

Plated

Bright Iflimbl-'J an

they apix-ai In the ll.si ;

.’hromlum l>la!.

.П Flared

Nut Nufibers ic ' 1 lei' Nuïïiiie

IdPOOl t.j

l.h'"'01 ati.l uijward

LIST OF PARTS COAAPLETE

FOR

MACHINE No. 11-30

For Stitching Rubberized Material for Balloon and Aeroplane

Work. Two needles, two shuttles. Gauges from inch to Y2 inch, in steps of ^le inch. The standard gauge is % inch. Maximum

stitch A to the inch. Clearance under presser foot inch. Feed ACROSS the cylinder. Alternating pressers. Foot lifter. Speed

800 R. P. M.

No. Plate Name *56633 122481 23527 " Dowel Pin (2)

50349E 23527 * Screw..................................................

43263 23527 " " Washer

14766 23526 “ Shaft...................................................

20640 23527 “ * Oil Tube,for Intermediate bear

122505 23527 Arm Shaft Oil Tube, for Intermediate

11354 23526 Arm Shaft Bushing...................................

43X 23526 * « "Set Screw (2)

56536 23526 " * Gear with two 445C

3012 23526 " ' " Pin....................................................

445C 23526 " " " Set Screw (2)

14578 23526 * Side Cover................................................................

-------

Arm with 15404 and two 15405

..........................................

.....................................

...................................

ing (back)

bearing (front)......................................................

65D 23526 " “ " Hinge Screw

......................

............

...................................

......................................

No.

14579

44 6C

14607

122328

434C

56537

122443

122441 122442

164D

2117 4 63C

144 D

2415

1Ò063

52239

11241

145D

56630

434C

23526 23526 23526 23526 23526 23526

23526

23526 23526 23526

23526

23526 23526 23526 23526

23526

23526 23526

23526 56636 23530 56637 23530

894F 23530

345C 23530

122509

134D

23530 23530

51464C 23530

51675R

23530

122510 23530

134D

51464C

23530

51675R 23530

56641 23530

11363

145E

56 5C

1513J

23526 23526 23526

23526

*56642

PARTS FOR MACHINE No

Plate

Arm Side Wheel with

“ “ “Set

“ " " Shaft

пин It

Ч H И и

Arm Side Wheel Shaft Gear Cover complete.

Nos. 122441, 122442 and two 164D

Arm Side Wheel Shaft Gear Cover

n n И и

Screw (2)

Arra Side Wheel Shaft Gear Pin

U U U It

II It M H

" Spool Bracket.. 14583

Eyelet......................

Arm Spool Bracket Spool Pin Washer

Arm Spool Bracket Screw . Balance Wheel with two 434C ...

" " Set Screw (2)

Cloth Plate

II ft It

n H It

HUH

n It и

Sc rew

Cloth Plate Bracket

(2)

.............................

Cloth Plate Bracket

Nut (2)

Cloth Plate Bracket

Инн

Screw

........................

Cloth Plate Bracket

(2)

.............................

Cloth Plate Bracket

Nut (2)

Cloth Plate with Brackets complete. Nos.

56636, 56637, 122509, 122510, two

894F and four each 51464C and 51675R

Crank Connecting Rod

» M H

Cylinder

..........................

11-30

Name

two 446C..........................

Screw (2).............................

.................................................................

n N H К

Bushing

..........................

" Set Screw (2)

Gear with 453C

.............

_________

...........................

пин N

H n II

” “ Strap...

................

No.

11367

445C

11368

565C

1513J

122485

122486

231C

14502

6132

212C

...............................

" 3et Sc rew

Screw

..............................

" " " 2415 with two 52239. ..

" “ " Spool Pin and Thread

56ЭС

50322C

56644

122487

(cloth) (2).... 56645

•56708

......................

..............................................

" " Bracket

(left) with two 345C

" Screw (2)....

14505 56707

2117

" Set Screw (2)

(right) back......................

" " Hinge

20640

14526

..............

(right) back. Screw

14522

14524

......................

(right) front

.....................

" " Hinge

14523

(right) front, Screw

(right) front. Screw

......................

56646 56647

56648

50449D

n n

with two 145E

Cap Screw (2)

Hinge .Screw..................

" " Nut

___________

................

23C

43 ec

3012 2117

164D

6312

445C 304C

1513J

PARTS FOR MACHINE No. 11-30

Plate 23526 23526 23526

23526 23526 23531

Feed Cam with two 445C.............................................

“ “ Set Screw (2).................................................

“ Connecting Link...................................................

" *' * Hinge Screw (2)....

“ " " " " Nut (2)

Feed Dog, 13 teeth (18 teeth to the

Inch) for 122495

23527 23531 23526 23527

23527

Feed Dog Carrier

" “ Screw.............................................................

" Forked Connection...............................................

" " “ Universal Joint..

* “ ** " '■ Cap

Screw

23527

Feed Forked Connection Universal Joint

Hinge Screw

23526 23526 23526 23527

23527

Feed Regulator

“ " Hinge Screw..................................

'' " Thumb Screw " Rock Shaft

" " " 56644 with 122486

" " Shaft............................................................

" " " 56645 with 14524 and

56707, for 3C4......................................................

23527

Feed Rock Shaft Arm with 436C

..................... " 14505 with 212C and

6132.......................................................................

23527 23527 23527 23527

Feed Rook Shaft Arm Pin

" " " “ Set Screw..............................

" " " Back Bearing Oil Tube... " " " Crank (forked) with ,

for 56644

23527

Feed Rock Shaft Crank with 445C, for

14524

Feed Rock Shaft Crank complete, for

56645, Nos.164D,6312,14522 and 14523

23527 23527 23527

23527 23527

Feed Rock Shaft Crank Pin for 14526

« " " >1 » for 14522 » » « » Roller

" " “ " " Cap Screw..

(t N N M

Washer..................................................................

23527 23527

23527 23528 23528 23528

Feed Rock Shaft Crank Set Screw

" " " Screw Center (2).............................

" » “ " " Nut (2)

Lifting Presser Bar.......................................................

" It в Bell Crank

* в в « в Connecting

Link.

23526

Lifting Presser Bar Bell Crank Connect

ing Link Hinge Screw

Name

..................................................

.........................................................

....................................................................

.........................................................

.............................................................

...............................

............................................................

....................

................................

...........................................

..............................................................

....................................................................

.......................

.................

.............................

..............................

------------

.....................................

.........................................

No. Plate

5Q450D

212D

56649

1 56650

1 159D

1 56651

1 180D

1 1316C 23528

i 453C !

1 56652

1 8760

1 16D 23528

1 8761 23528

1 122499

1 8763

1 8973 23528

1 43267 23528

1 56654 23528 1 58578

! 2117

‘ 453C 23528

56655

j 4389

2002

1 123D 23528

1 56656

1 11486

PARTS TOR MACHINE No. 11-30

23528

23528 23528

23528

23528 23528

23528

23528 23528

23528

23528 23526

23528

23528 23528

23526

Lifting Presser Bar Bell Crank Hinge

Screw....................................................................

Lifting Presser Bar Bell Crank Hinge

Stud Cap Screw ..................................................

Lifting Fd-esser Bar Bushing (lower)

" и и Bracket with

159D and 453C....................................................

Lifting Presser Bar Guide Bracket Ad

justing Screw.......................................................

Lifting Presser Bar Guide Bracket Guide.

H Ы » U У и

Screw (2)

Lifting Presser Bar Guide Bracket Screw

Stud

......................................................................

Lifting Presser Bar Guide Bracket Set

Screw....................................................................

Lifting Presser Bar Lifter with 8761 and

8763......................................................................

Lifting Pressor Bar Lifter Friction

Washer.................................................................

Lifting Presser Bar Lifter Hinge Screw..

" о « « stop Pin “ " “ Lifting Link

" . « « « Hinge

Stud

......................................................................

Lifting Presser Bar Lifting Link Hinge

Stud Pin

Lifting Presser Bar Lifting Link Hinge

Stud Washer........................................................

Lifting Presser Bar Rock Shaft

” /( <1 » II Adjusting

Arm with 453C....................................................

Lifting Presser Bar Rock Shaft Adjusting

Arm Pin

Lifting Presser Bar Rock Shaft Adjusting

Arm Set Screw

Lifting Presser Bar Rock Shaft Bracket..

M u n n u tt

Dowel Pin.............................................................

Lifting Presser Bar Rock Shaft Bracket

Dowel Pin (short)

Lifting Presser Bar Rock Shaft Bracket

Screw (2)

Lifting Presser Bar Rock Shaft Crank

with 453C ............................................................

Lifting Presser Bar Rock Shaft Crank Pin

• U и „ „ „

Sc rew...................................................................

Lifting Presser Bar Rook Shaft Eccentric

Strap with two each 141F and 1528D..

Name

........................

..............................................................

...................

..................

...............................................................

..................................

...............................................................

....................................................

................................................

..............................................................

PARTS FOR MACHINE No. 11-30 9

No. Plate Name

14IF 23528 Lifting Presser Bar Rock Shaft Eccentric

1528D 23528 Lifting Presser Bar Rock Shaft Eccentric

6083 23528 Lifting Presser Bar Rock Shaft Eccentric

1518E 23528 Lifting Presser Bar Rock Shaft F.ccentrlc

11487 23528 Lifting Presser Bar Rock Shaft Eccentric

11488 23528 Lifting Presser Bar Rock Shaft Eccentric

6467 23528 Lifting Presser Bar Spring 6533 23528 " »HU

460C 23528 Lifting Presser Bar Spring Stop Collar

122488 23531 Lifting Presser Foot 122466 23531 я « <1 Bracket With 1Я0К..

leOE 23531 " “ " " accrw

190D 23531 Lifting Presser Foot Screw....................................................

122489 23528 Needle Bar..............................................................................

122490

56661 23528 Needle Bar Bushing (lower)..................................................

122483 23528 ii » « (upper).........................................

56662 23528 “ " Connecting Link

1518E 23528 « « <i II » u

21629 23528 " " " Stud wlLli 15:p----------

122491 23528 " Clamp with two 50429C

122492 23528 " ” Holder.................................................

1136F 23528 « « . Clamping Screw......................

50396F 23528 * " Screw...................................................

50429C 23528 * Set Screw (2)........................................................

56534 23527 Oscillating Rock Shaft..................................................

56535

11398 23527 Oscillating Rock Shaft Hinge Pin

11165 23527 oscillating Rock Shaft Oil Pad..............................................

56664 23527 " Shaft

122502 23527 “ ' Collar with two 453C.

11848 23527 " * Crank.....................................

..........

377C 23528 » II « i> HlQge Screw..

15Ж 23528 « « « » Screw

..........

1508E 23527 " " " " * Nut

622C 23527 " « i я « ac^ew

1508E 23527 Oscillating Rook Shaft Hinge Pin Screw

453C 23527 * » • Screw (2) .

Strap Adjusting Screw (2)

Strap Adjusting Screw Nut (2)

Strap Hinge Screw...............................................

Strap Hinge Screw Nut

Strap Hinge Screw Slide

Strap Hinge Screw Slide Washer.......................

with 460C

Set Screw.....................................................

“ “ 122489 With 11B6P, 5039SF,

122491 and 122492

Oscillating Rock Shaft complete. Nos.

.............................................................

622C,11165,11398,56534 and two 1508E

Bearing..................................................................

Bearing Nut

..........................................................

..................................

...........................

.......................................

.....................................

.............................

........................................

.........................................

................................

....................................

.........................................

...................................................

................

------

-------

No.

19696

40025

453C 9119 5868

190E

5968

10540

1513J

50452E

2210 3230 2212

*3383

•3232

•3236

*56755

2076

2078

2080

3239

398E

2084

466C

2086 2090

112E

3381

3226

2210

3230

Plate

23527

23527 23527

23527

23528

23529 23529 23529

23529

23529 23529

23529

23529 23529 23529

23529

23529 23529 23529

23529 23529

PARTS FOR MACHINE No. II 30

Name

Oscillating Shaft Crank complete, Nos.

453C, 1513J, 5860 and 1184-8

...........................

Oscillating Shaft Crank Pin........................................

“ я 0 Screw “ “ " Slide Block

.......................................

....................

Oscillating Shaft Crank Slide Block com

plete, Nos. 1Э0Е,1054С,5968 and 9119

Oscillating Shaft Crank Slide Block Cap

Screw ...................................................................

Oscillating Shaft Crank Slide Block Cap

Screw Washer......................................................

Oscillating Shaft Crank Slide Block

Sci'ew Stud

..........................................................

Oscillating Shaft Crank Slide Block

Screw Stud Nut

Pressure Regulating Thumb Screw

...................................................

...........................

Shuttle (inside) Bobbin................................................

" " " Retaining Spring

tl H и и и

Rivet (2)

...............................................................

Shuttle (inside) Body with 398E, 2084,

3230, 3239 and two 2212

....................................

Shuttle (inside) Body with 398E, 2084,

3230, 3239 and two 2212.....................................

Shuttle (Inside) Cover

.................................................

" " " 3236 with 112E,

466C, 2078, 2080, 2086 and 2090.......................

Shuttle (inside) Cover Hinge Pin................................

" " Delivery Eye Thread

Guard...................................................................

Shuttle (Inside) Delivery Eye Tliread

Guard Rivet.........................................................

Shuttle (Inside) Main Spring

......................................

" " " " Screw...............

“ " ” " Steady Pin. " “ Tension Regulating

Screw....................................................................

Shuttle (Inside) Tension Spring

'' •' “ " Plate... (I я u я я

..................................

Screw....................................................................

Shuttle (Inside) complete.for 3/16 in.

and 5/16 in. to 1/2 In. gauges. Nos.

2076 , 2210, 3383 and 56755...............................

Shuttle (inside) complete,for 1/4 In.

gauge. Nos. 2076, 2210, 3232 and

56755....................................................................

Shuttle (outside) Bobbin

.............................................

“ я я Retaining

Spring...................................................................

• 2076 1 2078

^ 2080 1'

i 3240

i 2084 »

1 2086 i 2090

No.

2212

•3235

*4798

*3524

»3237

56754

•4562

*56753

f 398E

f 466C

3229

4729

, 3521

^ 65024

^ 2049

16742

122501

122500

112E

2049

629D

6223

1342F

6224

665D

PARTS FOR MACHINE No. 11-30

Plate

23529

Shuttle (outside) Bobbin Retaining

Spring Rivet (2)....................................................

Shuttle (outside) Body with 398E, 2084,

3230 , 3240 and two 2212.....................................

Shuttle (outside) Body with 398E, 2084,

3230, 3240 and two 2212

23529

Shuttle (outside) Body with 398E, 2084,

3230, 3240 and two 2212

Shuttle (outside) Cover for 3229 and

3521.......................................................................

Shuttle (outside) Cover 3237 with 112E,

466C, 2078, 2080, 2086 and 2090

Shuttle (outside) Cover for 4729

• " * 4582 with 112E,

466C, 2078 , 2080, 2086 and 2090.......................

23529 23529

Shuttle (outside) Cover Hinge Pin

■ " Delivery Eye Thread

Guard....................................................................

23529

23529 23529

Shuttle (outside) Delivery Eye Thread

Guard Rivet

Shuttle (outside) Main Spring

" u u • Screw " “ “ * Steady Pin

“ " Tension Regulating

Screw.....................................................................

23529

Shuttle (outside) Tension Spring.

23529 23529

Screw.....................................................................

Shuttle (outside) complete, for 3/ir. In.

gauge. Nos. 2076, 2210, 3235 and

56754.....................................................................

Shuttle (outside) complete, for 1/4 in.

gauge only. Nos. 2076, 2210, 4798

and 56753

Shuttle (outside) complete, for 5/16 In.

to 1/2 In. gauges. Nos. 2076, 2210,

3524 and 56754.....................................................

23529

23529 23529 23529

23529 23529

Shuttle Driver and Feed Lifting Gam.........................

« • • • • • pjjj

" Race Body (two pieces) with 629D

" ' Dowel Pin (2)...........................................

" * Hinge Screw

“ " Lock Pin.................................................

* '■ "II Screw.......................................

* “ « « Spring.......................................................

" * Loop Separator for 3/8 In.

to 3/4 In. gauges

Shuttle Race Loop Separator Screw...........................

Shuttle Race complete. Nos. 665D, 16742

and 122501............................................................

Name

.....................................

.......................

.................................

..............................

.........................................................

.....................................

............

Plate.

.............................................................

...........................................

...................................................

No. Plate

56667 23529

105D 23529

73 8D 23529

122440

23528

122438 23528

15 8D

23528

5983 23528

5984 23528

156CC 23528 8905

23528

81X 23528

8183

44TC 23528

56631

10148

23520

56671 23528

219F 23528

5795

23528

122503 23528

1095J

56672

23528

122439

2413

190D

164D

23528

56632

2102

156CC

6905

63X

23528 23528

23528

33929

2103

56673

8873

56714

43X

23528 23526 23526 23526 23528

122311

50437D

1995

23528 23528

PARTS FOR MACHINE No. 11-30

Name

Shuttle Race Cover......................................................

* • » Screw

* ' Screw (2)

...................................

..............................................

Tension Bracket and Vibrating Presser

Bar Cap with 447C and two 7393

.....................

Tension Bracket and Vibrating Presser

Bar Cap 122440 with 4797, 56631,

56671, 56675 and two 219J

................................

Tension Bracket and Vibrating Presser

Bar Cap Screw....................................................

Tension Friction Washer (felt) (2)

" " * (steel)

..................................

.............................

" Regulating Thumb Nut...................................

• " я » Washer

.....................

• Stud.....................................................i...

" * Э1Х with 1560C..................................

• ' Set Screw..............................................

Tension complete. Nos. 5984, 8183, 8905,

10148 and two each 5795 and 5983....

Tension Spring.............................................................

" Thread Guard....................................................

" " " Screw " Wheel with Flange (2)

....................................

.......................................

Thread Guido with two thread holes.........................

* " Screw

" Retainer Bracket

.....................................................

...............................................

Thread Retainer Bracket complete. Nos.

190D, 2413 , 56672 and two 56632

....................

Thread Retainer Bracket Thread Eyelet

(double)

...............................................................

Thread Retainer Bracket Thread Eyelet

Screw....................................................................

Thread Retainer Bracket Screw

................................

Thread Retainer complete. Nos.2103,8905,

33929 and two 2102 (2)

Thread Retainer Disc (2)

* “ Regulating Thumb Nut (2)

NN ищи

.......................................

............................................

Washer.................................................................

Thread Retainer Screw Stud (2)

................................

" « . « Q27C with

1560C...................................................................

Tltread Retainer Spring (2)........................................

“ Talce-up Cam with two 43X.............................

' * “ Pin

* я Ш Screw (2)

“ * Lever with 1995

...........................................

....................

................................

* • ■ 56714 with 50437D. . " я » Hinge Screw

...................

“ » « Roller and Screw

Stud with 1518E..................................................

No. 1518E

4797

56675

219J

56676

1224ЭЗ

122494

401D

122495

164D

122496

122497

122504

220J

56632

7393

14014BF

56683 61605

50111D

122498

*15404

15405

19IG

PARTS FOR MACHINE No. 11-30

Plate 23528

Thread Take-up Lever Roller and Screw

Stud Nut................................................................

23528

Thread Take-up Spring (double thread

eyelet)....................................................................

23528 23528

Thread Take-up Spring Regulator Plate.,.

ft ft ft ft ft

Screw.....................................................................

23531 23531

Ttiroat Plate Body........................................................

" * Needle Plate (small needle

hole).......................................................................

23531

Throat Plate Needle Plate (large needle

hole).......................................................................

23531

Throat Plate Needle Plate Screw (2)...........................

23531

122494 and two 401D

23531 23528

Throat Plate Screw (4).................................................

Vibrating Presser Bar with 616C6

" “ * 122496 with

and two 220J........................................................

23528

23528 23528

Vibrating Pressor Bar Cushion (rawhide).

“ ft ft ft 3crew (2).

" * • Guide Plate

23528

tion Pin (2)

23528

23528 23528 23528 23531 23531

Vibrating Presser Bar Hinge Screw

" ft ft Spring

• ft ft ft .....................

“ ft ft ft Screw..................

" * Foot " ft ft Screw

Trade Mark..................................................................

" ' Rivet (2).....................................................

Name

Throat Plate complete, for 122485, for

5/16 In. gauge. Nos. 56676, 122493,

..........................................

.............................

ft ft ft ft Posi

......................

...........................

.....................................

.......................................

...........................

BOBBIN WINDER

No. Plate

56686 23533

1503E 23533

56687 23533

494E 23533

779E 23533

56688

No.

56689

25029 120344 120345

11831

26026

26485

8909 8910

No. 27540

389D

56690

134D 27302 50356D

1620J

27303

27541 27305

23532

23532 23532 23532 23532

COLUMN STAND

Name

................................................

..........

Cylinder Support Rod

» * • Nut

Column Stand..............................................................

* “ Screw, to secure stand to

floor (5)................................................................

Column Stand Screw, to secure machine to

stand (4)...............................................................

Column Stand complete. Nos. 134D, 295C,

15CSE,1513J,11459,21506,56686,56687,

56691, 56695, 56696, 56701 to 56705,

four 779E and five 494E

ACCESSORIES

Plate

Machine Driving Belt, size 5/16 In.

23534

23534 23534 23534 23534

23534 23534 23534

(SWINGING AUTOMATIC, RIGHT HAND)

Plate 23532 23532 23532 23532 23532

length 66 In. with 25029 Machine Driving Belt Hook Oiler (copper plated) with 120345..

* Spout, 4 1/2 In. long..................................

Screw Driver (large)

“ “ (small)

' * (shuttle tension)............................

Wrench for 1513 and 1518

" • 1508............................................

BOBBIN WINDER

Base

..............................

* Screw

........................

Bracket

................

' Screw

Frame

" Spring

Pulley

Spindle............................

....................................

.............................

' Hinge Screw..............................

* * " Nut..........................................................

..................................

..............................

Name

.............................

.........................................

...........................................

...............................

Name

.....................................

....................................

..........................

No.

27306 27307 27308

56691

11241 27309

2455

1562J

10141

2106

27646

27543

56692

19510

19694

56693

56694 43137

39575 23533 39576 23533

56695 23533 56696 23533

56697

Plate 23532 23532

23532

35D

418E

23532 23532 23532

23532 23532 23532 23532 23532

23532 23532

134D 838D

B3538

No.

567D

66D

567D

295C 23533

1513J 23533

Spool Pin

Spool Stand complete. Nos. 418E, 1562J,

Spool Stand Bracket

.......................................................................

" Stand......................................................................

2106,10141,11241,27306,27307 and two each 2455 and wood screws 1 In. No.

10............................................................

* • * Screw.........................................

" * Screw " Washer (cloth)

Stop Latch

Tension Disc (2)

Bobbin Winder, Nos. 35D, 1620J, 27302,

Bobbin Winder (swinging automatic, right

.....................................................................

" “ Hinge Screw

“ Regulating Thumb Nut

• Screw Stud...................................................

“ Spring

“ Thread Guide......................................................

27303,27305,27309,27540,27541,50356D and two wood screws 1 In. No. 7

hand) complete. Nos.,27308 and 27646

............................................................

..................................................................

FOOT LIFTER PARTS

(FOR COLUMN STAND)

Plate 23533

23533 23533 23533 23533 23533

23533 23533 23533

..........

Bell Crank (left)

It 0 «

« «

* * • Screw " (right) * " Hinge Screw

* Connecting Rod

Chain, length 34 In. with 39575 and

39576.....................................................................

Chain Connecting Link Hook (lower)

• * * • (upper)

Treadle...........................................................................

" Spring

..................................................................

• Stop Screw

• • " Nut.............................................

Foot Lifter complete, for column stand.

Nos. 86D, 295C, 1513J, 19510, 19694, 43137, 56692 to 56696 and two 567D..

Name

.....................................................

........................................................

....................................................

...............................................

......................................

........................

Name

Hinge Screw Spring

.........................................................

..........................

....................................

* Hook.............................

............................

.........................

..........................

........................

...................

...................................................

No.

56701

350C

21506

4570

56702

356C 23533 56703 11459

44-ЭС

56704

56705

3560

MOTOR STARTING PARTS

(FOR COLUMN STAND)

Plate 23533 23533 23533

23533

23533 23533

23533

Motor Starting Lever Connection..............................

" " " " Set Screw ' “ “ " Stop Collar

with 46?C.............................................................

Motor Starting Lever Connection Stop

Collar Set Screw..................................................

Motor Starting Treadle with two 356C .. .,

" ” " Set Screw (2)....

" " " Shaft " " " " Collar with

two 440C..............................................................

Motor Starting Treadle Shaft Collar Set

screw (2)...............................................................

Motor Starting Treadle Shaft Crank with

two 35 6C.............................................................

Motor Starting Treadle Shaft Crank Hook.

" " ' " ” Set

Screw....................................................................

^^aпle

............................

NUMERICAL LIST OF PARTS

16D

2ЭС

35D

65D 86D

105D

112E

123D

134D

141F

144D 145D 14 5E

15EC

158D

15 9D

164D

164D 164D 180D

18CE

190D

Plate 23528 23527

23532

23526

23533 23529 23529

23529

23528

23530

23532

23528

23526 23526

23526

23528

23526

23527

23528 23531 23528

23531

23531 23528

Lifting Presser Bar Lifter Hinge Screw.. Feed Forked Connection Universal Joint

Hinge Screw..........................................................

Bobbin Winder Stop Latch Hinge Screw for

27646.....................................................................

Arm Side Cover Hinge Screw......................................

Bell Crank (left) Spring Screw for 56697

Shuttle Race Cover Screw............................................

" (inside) Tension Spring Plate

Screw for 56755....................................................

Shuttle (outside) Tension Spring Plate

Screw for 56753 and 56754

Lifting Presser Bar Rock Shaft Bracket

Screw (2)...............................................................

Cloth Plate Bracket (right) back, Hlng.d

Screw

Cloth Plate Bracket (right) front, Hinge

Bobbin winder Bracket Screw

Arm Side Wheel Shaft Screw

" Spool Bracket Screw

Tension Bracket and Vibrating Presser

Lifting Presser Bar Guide Bracket Ad

Arm Side Wheel Shaft Gear Cover Strap

Feed Rock Shaft Crank Roller Cap Screw

Thread Retainer Bracket Screw

Throat Plate screw (4)..................................................

Lifting Presser Foot Bracket Screw for

Lifting Presser Foot Screw Thread Retainer Bracket Thread Eyelet

....................................................................

Screw.....................................................................

" * Spool Stand Bracket Screw

for 56688...............................................................

Lifting Presser Bar Rock Shaft Eccentric

Crank Connecting Rod Cap Screw for Ll3(ii

(2)

.........................................................................

Needle Bar Connecting Stud Set Screw for

21629

....................................................................

Bar Cap Screw.....................................................

justing Screw for 56650

Screw for 122443 ( 2)...........................................

for 14524

Lifting Presser Bar Guide Bracket Guide

Screw (2)...............................................................

122466...................................................................

Screw for 122439..................................................

No.

19 OD

Name

.................................

....................................

Strap Adjusting Screw for 11486 (2).

......................................

..............................................

......................................

..............................................................

.................................

..........................................

NUMERICAL LIST OF PARTS NUMERICAL LIST OF PARTS

No.

1Э0Е

19Ю 212C

212D

219J

219F 22 OJ

231C 295C 304C

34SC

356C

377C

389D 398E

23530

23533

23528 23532 23529

398E 23529

401D

418E

434C

434C 436C 437C 437C

445C 4450 4450

440C 4470 4403

453C

23531

23532

23526

23526 23527 23526

23526

23526 23526 23527

23526 23528 23533

23526

Plate

23527

23531

23527

23528

23528 23528

23531 23533 23527

Name

Oscillating Shait Crank Slide Block Cap

Screw for 5868....................................................

Vibrating Presser Foot Screw....................................

Feed Forked Connection Universal Joint

Cap Screw for 56707..........................................

Lifting Presser Bar Bell Crank Hinge

Stud Cap Screw..................................................

Thread Take-up Spring Regulator Plate

Screw for 122438................................................

Tension Thread Guard Screw

...................................

Vibrating Presser Bar Cushion Screw for

122497 ( 2)...........................................................

Feed Dog Screw...........................................................

Treadle Stop Screw for 56688 and 56697.. Feed Rock Shaft Screw Center (2)

............................

Cloth Plate Bracket (left) Set Screw for

56637 (2)..............................................................

Motor Starting Lever Connection Set

Screw for 56704

..................................................

Motor Starting Treadle Set Screw for

56702 (2)..............................................................

Motor Starting Treadle Shaft Crank Set

Screw for 56704

..................................................

Needle Bar Connecting Link Hinge Screw.. Bobbin Winder Base Screw

.......................................

Shuttle (inside) Main Spring Screw for

3232 and 3383

.....................................................

Shuttle (outside) Main Spring Screw for

3235, 3524 and 4796

...........................................

Throat Plate Needle Plate Screw for

122495 ( 2)

......................................................

Bobbin Winder Tension Screw Stud for

27308....................................................................

Anti Side Wheel Shaft Bushing Set Screw

(2).........................................................................

Balance Wheel Set Screw for 56630 (2)... Feed Rock Shaft Arm Set Screw for 14505. Arm Shaft Bushing Set Screw (2)

..............................

Thread Take-up Cam Set Screw for 56673

(2).........................................................................

Arm Shaft Gear Set Screw for 56536 (2)..

Feed Cam Set Screw for 11367 (2).............................

" Rock Shaft Crank Set Screw for

14522 and 14526

.................................................

Arm Side Wheel Set Screw for 14579 (2).. Tension Stud Set Screw for 122440

...........................

Motor Starting Treadle Shaft Collar Set

Screw for 11459 ( 2)............................................

Arm Side Wheel Shaft Gear Set Screw for

56537....................................................................

No.

4530

453C

453C 457C

460C

4600

4660

494E

565C

5650

567D

567D 5600 6000

622C

629D

637C

665D

■■;38D 779E

SIX

838D

894F

1054C

1095J 1186F

1316C

1342F 1503E

1508E

Plate 2352B

23528

23527

23527 23533

23526

23529

23533

23526 23526 23533

2353323526 23528

23527

23529

23528

23529

23529 23533

23528

23532 23530

23527

23528 23528

23528

23529 23533

23527

Name

Lifting Presser Bar Guide Bracket Set

screw for 56650....................................................

Lifting Presser Bar Rock Shaft Adjusting

Arm Set Screw for 58578

....................................

Lifting Presser Bar Rock Shaft Crank Set

Screw for 56656

...................................................

Oscillating Shaft Collar Set Screw for

122502 ( 2)............................................................

Oscillating Shaft Crank Screw for 19696.

Motor Starting Lever Connection Stop

Collar Set Screw for 21506.................................

Lifting Presser Bar Spring Stop Collar

Set Screw for 6533

..............................................

Shuttle (Inside) Tension Regulating

Screw for 56755...................................................

Shuttle (outside) Tension Regulating

Screw for 56753 suid 56754

...............................

Column Stand Screw, to secure stand to

floor, for 56688 (5)..............................................

Feed Connecting Link Hinge Screw Craink Connecting Rod Hinge Screw

.......................

Bell Crank (left) Hinge Screw for 56697.

" " (right) Hinge Screw for 56697

Feed Regulator Hinge Screw

......................................

Lifting Presser Bar Rock Shaft Eccentric

Strap Hinge Screw

..............................................

Oscillating Rock Shaft Hinge Pin Screw

Bearing for 56535................................................

Shuttle Race Hinge Screw for 16742

..........................

Thread Retainer Screw Stud foi- (;;)

Shuttle Race Loop Separator Screw for

122500

..................................................................

Shuttle Race Screw (2).................................................

Column Stand Screw, to secure machine to

stand, for 56688 (4)

Tension Stud for 8183

.............................................

.................................................

Bobbin Winder Spool Stand Screw............................

Cloth Plate Bracket (left) Screw for

56641 (2)...............................................................

Oscillating Shaft Crank Slide Block

Screw Stud for 5868.............................................

Thread Guide Screw....................................................

Needle Clamp Holder Clamping Screw for

122490...................................................................

Lifting Presser Bar Guide Bracket screw

Stud.......................................................................

Shuttle Race Lock Pin Screw

......................................

Column Stand Cylinder Support Rod Nut

for 56688...............................................................

Oscillating Rock Shaft Hinge Pin Nut for

56535.....................................................................

NUMERICAL LIST OF PARTS |

NUMERICAL LIST OF PARTS 21

No.

Plate

1508E 23527

1513J 23526

1513J 1513J 1513J

1513J

23526 23527

23527

23533

1518E 23528

1518E

23528

1528D 23528

1560C

23528

1560C 23528

1562J 23532

1620J 23532

1995

2002

2049 2049

23528

23529 23529

2076 23529

2078 23529

2080

23529

2084 23529

2084

23529

2086 23529

2086

23529

Oscillating Rock Shaft Hinge Pin Screw |

Bearing Nut........................................................ ;

Crank Connecting Rod Hinge Screw Nut

Feed Connecting Link Hinge Screw Nut (2) Feed Rock Shaft Screw Center Nut (2)

__________

Oscillating Shaft Crank Slide Block ;

Screw Stud Nut for 19696

.................................

Treadle Stop Screw Nut for 56688 and !

56697...................................................................

Lifting Presser Bar Rock Shaft Eccentric

Strap Hinge Screw Nut...................................... !

Needle Bar Connecting Link Hinge Screw j

Nut....................................................................... i

Thread Take-up Lever Roller and Screw '

Stud Nut for 1995...............................................

Lifting Presser Bar Rock Shaft Eccentric *

Strap Adjusting Screw Nut for 11486

(2)

........................................................................

Tension Regulating Thumb Nut for 8183... 1

Thread Retainer Regulating Thumb Nut for i

33929 (2)..............................................................

Bobbin Winder Tension Regulating Thumb ,

Nut for 27308

......................................................

Bobbin Winder Frame Hinge Screw Nut for

27646....................................................................

Thread Take-up Lever Roller and Screw

Stud with 1518E, for 56714................................

Lifting Presser Bar Rock Shaft Bracket

Dowel Pin (short)................................................

Shuttle Driver and Feed Lifting Cam Pin. Shuttle Race Dowel Pin (2)

.........................................

" (Inside) Cover Hinge Pin for

3226 and 3381

...................................................

Shuttle (outside) Cover Hinge Pin for

3229 , 3521 and 4729...........................................

Shuttle (inside) Delivery Eye Thread 4 3230

Guard for 56755.................................................. I

Shuttle (outside) Delivery Eye Thread

Guard for 56753 and 56754

.............................

Shuttle (Inside) Delivery Eye Tiiread

Guard Rivet for 56755

.....................................

Shuttle (outside) Delivery Eye Thread

Guard Rivet for 56753 and 56754

.....................

Shuttle (Inside) Main Spring Steady Pin

for 3232 and 3383

...........................................

Shuttle (outside) Ifeln Spring Steady Pin

for 3235, 3524 and 4798

.....................................

Shuttle (inside) Tension Spring for

56755..............................................

Shuttle (outside) Tension Spring for

56753 and 56754..................................................

________

Name /

■

No. 2090

2090

Plate 23529

23529

Shuttle (inalde) Tension Spring Plate

for 56755

Shuttle (outside) Tension Spring Plate

Name

..............................................................

for 56753 and 56754............................................

2102 2103 2106

2117

2117 2117 2117

23528

23528 23532

23526 23527 23527 23528

Thread Retainer Disc for 56632 (2)............................

“ " Spring for 56632 (2)....

Bobbin Winder Tension Thread Guide for

27308................................................................................

Arm Side Wheel Shaft Gear Pin

Feed Rock Shaft Arm Pin

..................................

...........................................

“ " " Crank Pin for 14522.........................

Lifting Presser Bar Rock Shaft Adjusting

Arm Pin................................................................

2117 2210

23528 23529

Lifting Presser Bar Rock Shaft Crank Pin

Shuttle (inside) Bobbin for 3226 and

3381.......................................................................

2210

2212

22J.2

23529

Shuttle (outside) Bobbin for 3229, 3521

and 4729

...............................................................

Shuttle (Inside) Bobbin Retaining Spring

Rivet for 3232 and 3383 (2)

................................

Shuttle (outside) Bobbin Retaining

Spring Rivet for 3235, 3524 and 4798

(2)

.........................................................................

2413

23528

Thread Retainer Bracket Thread Eyelet

(double) for 122439.............................................

2415 2455 3012 3012

3226

3229

23526 23532 23526 23527

Arm Spool Bracket for 15063 Bobbin Winder Tension Disc for 27308 (2)

Arm Shaft Gear Pin.....................................................

Feed Rock Shaft Crank Pin for 14526 Shuttle (Inside) complete for 1/4 in.

gauge. Nos. 2076,2210,3232 and 56755

Shuttle (outside) complete, for 3/16 In.

.....................................

.......................

gauge, NOS. 2076,2210,3235 and 56754

3230

23529

Shuttle (outside) Bobbin Retaining

Shuttle (Inside) Bobbin Retaining Spring

for 3232 and 3383

...............................................

spring for 3235, 3524 and 4798..........................

^ *3232

23529

^ *3235

‘ *3236

*3237

; 3239

3240

23529 23529

23529

Shuttle (Inside) Body with 398E, 2084,

3230, 3239 and two 2212, for 3226...

Shuttle (outside) Body with 398E, 2084,

3230, 3240 and two 2212, for 3229...

Shuttle (Inside) Cover for 56755.................................

• (outside) Cover for 3228, 3229, 3520, 3521 and 56754

..........................................

Shuttle bhslde) Main Spring for 3232

and 3383

...............................................................

Shuttle (outside) Main Spring for 3235,

3524 and 4798.......................................................

3381

Shuttle (Inside) complete, for 3/16 In.

and 5/16 in. to 1/2 In. gauges and above. Nos. 2076,2210,3383 and 56755

NUMERICAL LIST OF PARTS

No.

Plate

*3383

3521

..........

*3524 23529

4389

*4582

4729

4797

*4798

5795 5868

5968

59K5

5984

6132

6223 6224 6312

6467 6533

7393

8183 8760

8761

8763

8873 8905

8905

8909

23528

—

23528 Thread Take-up Spring (double thread •

—

23528 Tension Wheel with Flange for 56631 (2). ;

—

23527

23528

23527

23529 23529 23527

23528 23528

23528

..........

23528

23526

23528

23534

Name

Shuttle (Inside) Body with 398E, 2084,

3230, 3239 and two 2212, for 3381...

No.

8910 23534 8973 23528

Shuttle (outside) complete for 5/16 In.

to 1/2 In. gauges. Nos. 2076, 2210, i

3524 and 56754

...................................................

Shuttle (outside) Body with 398E, 2084, j

3230, 3240 and two 2212, for 3521...

Lifting Presser Bar Rock Shaft Bracket

Dowel Pin............................................................ \

9119 23527

10141 10148 11165 11241 23526

Shuttle (outside) Cover for 3519, 4729 '

and 56753............................................................ \

11241 23532

Shuttle (outside) complete for 1/4 In.

gauge, Nos. 2076,2210,4798 and 56753 i

11354 23526 11363

eyelet) for 122438

...............................................

11367 23526

Shuttle (outside) Body with 398E, 2084, < 11368

3230, 3240 and two 2212, for 4729... !

Oscillating Shaft Crank Slide Block com- 1

11398 23527

11459 píete. Nos.190E,1054C ,5968 and 9119, for 19696

.............................................................

11486 23528

Oscillating Shaft Crank Slide Block Cap i

Screw Washer for 5868

......................................

11487 23528

Tension Friction Washer (felt) for 56631

(2).........................................................................

11488 23528

Tension Friction Washer (steel) for ‘

56631.................................................................... 11831 23534

Feed Forked Connection Universal Joint 1

for 14524 and 56707

...........................................

Shuttle Race Lock Pin................................................. |

" * » » Spring

........................................................

11848 23527 14502 23526 14505 23527 14522 23527

Feed Rock Shaft Crank Roller Cap Screw \

Washer for 14524................................................

Lifting Presser Bar Spring

.........................................

14523 23527 14524

" и « и Collar 1

with 460C............................................................. '

Vibrating Presser Bar Guide Plate Posl- ?

14526 23527

tlon Pin for 122440 (2)........................................

Tension Stud 817C with 1560C, for 56631. 14570

Lifting Presser Bar Lifter Friction «

14579

Washer................................................................. 14583 23526

Lifting Presser Bar Lifter Stop Pin for

14607 23526

56652.................................................................... I 14786 23526

Lifting Presser Bar Lifting Link Hinge ¡

15063 23526

Stud for 56652..................................................... *15404

Thread Take-up Cara Pin........................................... | 15405

Tension Regulating Thumb Nut Washer for ■

16742 23529

56631.................................................................... ^

Thread Retainer Regulating Thumb Nut

19510 23533

Washer for 56632 ............................................... 19694 23533

Wrench for 1513 and 1518 (Accessories).. f

Plate

23532 23528 23527

23526

23533

23526 23526

—

Name

Wrench for 1508 (Accessories)

....................................

Lifting Presser Bar Lifting Link Hinge

3tud Pin.................................................................

Oscillating Shaft Crank Slide Block for

5868.......................................................................

Bobbin Winder Tension Spring for 27308..

Tension Spring for 56631.............................................

Oscillating Rock Shaft Oil Pad for 56535 Arm Spool Bracket Spool Pin Washer

(cloth) (2)..............................................................

Bobbin Winder Spool Washer (cloth) for

27308.....................................................................

Arm Shaft Bushing

.......................................................

Crank Connecting Rod with two 145E

Feed Cam with two 445C.............................................

" Connecting Link

...................................................

Oscillating Rock Shaft Hinge Pin for

56535.....................................................................

Motor Starting Treadle Shaft Collar with

two 448C, for 56688

............................................

Lifting Presser Bar Rock Shaft Eccentric

Strap with two each 141F and 1528D..

Lifting Presser Bar Rock Shaft Eccentric

Strap Hinge Screw Slide......................................

Lifting Presser Bar Rook Shaft Eccentric

Strap Hinge Screw Slide Washer

Screw Driver (large) Accessories.................................

Oscillating Shaft Crank for 19696

..............................

Feed Forked Connection..............................................

" Rock Shaft Arm with 43(X1, for 56707

• • “ Crank with 445C, for

14524.....................................................................

Feed Rock Shaft Crank Roller for 14524.. Feed Rock Shaft Crank complete, for

56645 and 56708, Nos.164D,6312,14522

and 14523..............................................................

Feed Rock Shaft Crank (forked) with 445C,

for 56644...............................................................

Arm Side Cover.............................................................

• " Wheel with two 446C...................................

Feed Regulator Arm Side Wheel Shaft

• Shaft

..............................................................

..................................................

......................................................................

“ Spool Bracket 2415 with two 52239...

—

Trade Mark for 56633

..................................................

• “ Rivet for 56633 (2).....................

Shuttle Race Body (two pieces) with

629D, for 122500

Bell Crank (left) Spring for 56697

..................................................

...............................

• * « • Hook for 56697.

.......................

24 NUMERICAL LIST OF PARTS

No. Plate Name ||

19696

-------

Oscillating Shaft Crank complete, Nos. f;

453C, 1613J, 5868 and 11848............................ t

20640 23527 Arm Shaft Oil Tube, for Intermediate §

bearing (back)....................................................

20640 23527 Feed Rock Shaft Back Bearing Oil Tube.., i 21506 23533 Motor Starting Lever Connection Stop

Collar with 4570, for 56688............................... 5

21629 23528 Needle Bar Connecting Stud with 155C .... 8

25029 23534 Machine Driving Belt Hook for 56689 26026 23534 Screw Driver (small) Accessories

............................

.................

“]

26485 23534 " " (shuttle tension) Accesso- 7

rles.............................................................................. 1

27302 23532 Bobbin Winder Frame for 27646 27303 23532 " " " Spring for 27646 27305 23532 “ " Spindle for 27646

.....................

_______________

...........................

27306 23532 " ' Spool Pin for 27308........................ :

27307 23532 " " " Stand for 27308

...........................

27308 23532 Spool Stand complete for 27543, Nos. :

418E, 1562J, 2106, 10141, 11241, I 27306, 27307 and two each 2455 and !

wood screws 1 In. No. 10....................................

27309 23532 Bobbin Winder Stop Utch for 27646

..............

27540 23532 " " Base for 27646....................................

27541 23532 " " Pulley for 27646 27543

-------

Bobbin Winder (swinging automatic, right

.................................

hand) complete. Nos. 27308 and 27646

27646 23532 Bobbin Winder, Nos. 35D, 1620J, 27302,

27303,27305,27309,27540,27541,50356D and two wood screws 1 In. No. 7, for

27543....................................................................

33929

-------

Thread Retainer Screw Stud 637C with

1560C, for 56632.................................................

39575 23533 Chain Connecting Link Hook (lower) for

43137....................................................................

39576 23533 Chain Connecting Link Hook (upper) for

43137....................................................................

40025 23527 Oscillating Shaft Crank Pin................................................

43137 23533 Chain, length 34 In. with 39575 and

39576, for 56697..................................................

43263 23527 Arm Screw Washer..............................................................

43267 23528 Lifting Presser Bar Lifting Link Hinge

Stud Washer........................................................

50111D 23528 Vibrating Presser Bar Spring Screw..................................

50322C 23526 Feed Regulator Thumb Screw

............................................

50349E 23527 Arm Screw............................................................................

50356D 23532 Bobbin Winder Frame Hinge Screw for

27646....................................................................

50396F 23528 Needle Clamp Screw for 122490 50429C 23528 “ Set Screw for 122491 (2)

.................

50437D 23528 Thread Take-up Lever Hinge Screw for

122311

.................................................................

■; li’

NUMERICAL LIST OF PARTS

No.

50449D

Plate 23528

Lifting Presser Bar Bell Crank Connect

Name

ing Link Hinge Screw..........................................

50450D 23528

Lifting Presser Bar Bell Crank Hinge

Screw.....................................................................

50452E

51464C

23528 23530

23530

51675R

23530

Pressure Regulating Tliumb Screw.............................

Cloth Plate Bracket (right) back. Screw

for 56641 (2)..................................................

Cloth Plate Bracket (right) front. Screw

for 56641 (2)..................................................

Cloth Plate Bracket (right) back. Screw

Nut for 56641 (2).........................................

51675R

52239

56534 56535

23530

23526

23527

Cloth Plate Bracket (right) front. Screw

Nut for 56641 (2)..

.......................................

Arm Spool Bracket Spool Pin and Thread

Eyelet for 15063

...................................................

Oscillating Rock Shaft for 56535.................................

Oscillating Rock Shaft complete. Nos.

6220,11165,11398,56534 and two 1508E

56536 56537 56630 56631

23526 23526 23526

Arm Shaft Gear with two 445C...................................

Side Wheel Shaft Gear with 15:4'

......................

Balance Wheel with two 434C.....................................

Tension complete for 122438, Nos. 5984,

8183, 8905, 10148 and two each 5795

and 5983................................................................

56632

Thread Retainer complete for 122439,Nos.

2103, 8905, 33929 and two 2102 (2).

*56633

56636 56637

23530 23530

Arm with 15404 and two 15405

Cloth Plate for 56641....................................................

" " Bracket (left) with two 345C,

..................................

for 56641..............................................................

56641

23530

Cloth Plate with Brackets corapleto. Nos.

56636, 56637, 122509, 122510, two

894F and four each 51464C and 51675R

*56642

56644 56645 56646

56647 56648

23527

23527 23528 23528 23528

Cylinder.........................................................................

Feed Rock Shaft for 122487

" " "for 56708

........................................

..........................................

Lifting Presser Bar.......................................................

" 0 u Crank

.....................

* » « « * Connecting

Link.......................................................................

56649 56650

23528 23528

Lifting Presser Bar Bushing (lower)

" « » Qui(3e Bracket with

...........................

159D and 453C.....................................................

56651 56652

56654 56655 56656

23528 23528

23528 23528 23528

Lifting Presser Bar Guide Bracket Guide.

" " • Lifter with 8761 and

8763

.......................................................................

Lifting Presser Bar Rock Shaft....................................

“ (I « « » Bracket.. “ • » • « Qj-ank with

453C.......................................................................

No. 56661 56662 56664 56667 56671 56672 56673 56675

56676 56682 56683 56686

56687

Plate 23528 23528 23527 23529 23528 23528 23526 23528

23531

23528 23528

23533

56688

56689

56690 56691

56692 56693 56694 56695 56696

23532 23532

23533 23533 23533 23533 235^3

56697

56701

56702

23533

56703 23533 56704

56705

23533

56707

»56708

56714

23528

»56753

NUMERICAL LIST OF PARTS

Name

Needle Bar Bushing (lower)

" " Connecting Link

Oscillating Shaft

.........................................................

Shuttle Race Cover

.......................................

....................................

.....................................................

Tension Thread Guard for 122438............................

Thread Retainer Bracket for 122439

* Take-up Cam with two 437C

........................

...........................

" " Spring Regulator Plate for

122438

.................................................................

Throat Plate Body for 122495....................................

Vibrating Presser Bar Guide Plate............................

" " “ Spring

..............................

Column Stand Cylinder Support Rod for

56688....................................................................

Column Stand for 56688.............................................

Column Stand complete. Nos. 134D, 295C,

1503E,15131,11459,21506,56686,56687, 56691, 56695, 56696, 56701 to 56705, four 779E and five 494E

....................................

Machine Driving Belt, size 5/16 in.,

length 66 In. with 25029

....................................

Bobbin Winder Bracket..............................................

" " Spool Stand Bracket for

56688....................................................................

Bell Crank (left) for 56697..........................................

" " (right) for 56697........................................

" " Connecting Rod for 56697

.......................

Treadle for 56688 and 56697......................................

" Spring for 56688 and 56697

.............................

Foot Lifter complete, for coluim stand.

Nos. 86D, 295C, 1513J, 19510, 19694, 43137 , 56692 to 56696 and two 567D..

Motor Starting Lever Connection for

56688....................................................................

Motor Starting Treadle with two 356C,for

56688....................................................................

Motor Starting Treadle Shaft for 56688..

'' " II II Crank with

two 356C, for 56688

...........................................

Motor Starting Treadle Shaft Crank Hook

for 56688

.............................................................

Feed Rock Shaft Arm 14505 with 212C and

6132, for 56708....................................................

Feed Rock Shaft 56645 with 14524 and

56707, for 304......................................................

Thread Take-up Lever with 1995, for

122311..................................................................

Shuttle (outside) Cover 4582 with 112E,

466C, 2078, 2080, 2086 and 2090, for

4729......................................................................

No.

*56754

»56755

58578

61605

65024

120344

120345 122311 122328

122438

122439

122440

122441

122442

122443

122466 122481 122483 122485

122486 122487 122488 122489

122490

122491 122492 122493

122494

122495

NUMERICAL LIST OF PARTS

Plate Name

-------

Shuttle (outside) Cover 3237 with 112E,

466C, 2078, 2060, 2086 and 2090, for 3229 and 3521

-------

Shuttle (Inside) Cover 3236 with 112E,

......................................................

466C, 2078, 2080, 2086 and 2090, for

23528

3226 and 3381

Lifting Presser Bar Rock Shaft Adjusting

Arm with 453C

Vibrating Presser Bar Spring Hook for

......................................................

....................................................

122496...................................................................

23529 23534

23534

Shuttle Driver and Feed Lifting Cam Oiler (copper plated) with 120345 (Ac

cessories)

.............................................................

Oiler Spout, 4 1/2 In. long, for 120344.

........................

Thread Take-up Lever 56714 with 50437D..

23526 23528

Arm Side Wheel Shaft Bushing

Tension Bracket and Vibrating Presser

..................................

Bar Cap 122440 with 4797, 56631,

56671, 56675 and two 219J

-------

Thread Retainer Bracket complete, Nos.

190D, 2413, 56672 and two 56632

.................................

......................

23528 Tension Bracket and Vibrating Presser

Bar Cap with 447C and two 7393, for

122438

..................................................................

23526 Arm Side Wheel Shaft Gear Cover for

122443

..................................................................

23526 Arm Side Wheel Shaft Gear Cover Strap

for 122443............................................................

23526 Arm Side Wheel Shaft Gear Cover complete.

Nos. 122441, 122442 and two 161D

-------------23531 Lifting Presser Foot Bracket with loOE..

23527 Arm Dowel Pin (2).......................................................

23528 Needle Bar Bushing (upper)

.......................................

23531 Feed Dog, 13 teeth (18 teeth to the inch)

for 122495............................................................

23527 Feed Dog Carrier for 122487

-------

" Rock Shaft 56644 with 122486............................

23531 Lifting Presser Foot

......................................................

23528 Needle Bar for 122490

..........

" " 122489 with 1186F, 50396F,

122491 and 122492

.....................................

.................................................

..............................................

23528 Needle Clamp with two 50429C, for 122490

23528 " “ Holder for 122490..................................

23531 Throat Plate Needle Plate (small needle

hole) for 122495....................................................

23531 Throat Plate Needle Plate (large needle

hole) for 122495

...................................................

23531 Throat Plate complete, for 122485, for

5/16 In. gauge. Nos. 56676, 122493,

122494 and two 401D

..........................................

NUMERICAL LIST OF PARTS k-*

No. Plate

122496

122497

122498 122499 122500

122501 23529

122502 122503 122504

122505

122509 23530

122510

140148F

23528

23531 23528

23527 23528 23528

23527

23530

23528

Name ?

Vibrating Pressor Bar with 61605, for 5"

122497................................................................. t

Vibrating Pressor Bar 122496 with 122504 ;

and two 220J............................................................ if

Vibrating Pressor Foot...............................................

Lifting Presser Bar Lifting Link...................................... |

Shuttle Race complete, Nos. 665D, 16742

and 122501..........................................................

Shuttle Race Loop Separator for 3/8 In. g

to 3/4 In. gauges, for 122500

............................

Oscillating Shaft Collar with two 45Ж .. Thrciad Guide with two thread holes

.......................

Vibrating №esser Bar Cushion (rawhide)

for 121hl97

.........................................................

Arm Shaft Oil Tube, for Intermediate

bearing (front)....................................................

Cloth Plate Bracket (right) back, for

56641

...................................................................

Cloth Plate Bracket (right) front, for

56G41

..................................................................

Vibrating Pressor Bar Hinge Screw

..........................

*1-

SINGER Needles should be used

in SINGER Machines

These Needles and their Containers

are marked with the

Company’s Trade Mark "SI MAN CO.**" i

Needles in Containers marked

"FOR SINGER MACHINES”

are NOT SINGER made needles. 2

23527

2352Ô - i/з

23529 • 1/2

^ о

рУ ь :S

^7л \v

8 ^

Sí '

23533 - 1/7

23534 - 1/2

1203f4i4.

26026

8‘:)C)9

120JU5

III—

----

.. i.n.iiiiSgWK.

2¿¿^B5

II83I

8910

23029

SINGER 11-30 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

,‘i; . 4

INSTRUCTIONS FOR OILING

MACHINE No. 11-30

MOTOR STARTING PARTS

NUMERICAL LIST OF PARTS

23533 - 1/7

23534 - 1/2