Singer 112W145 User Manual
Form
(149)
Printed
2695w
inU.S.
A.
LIST
OF
PARTS
MACHINE
THE SINGER
MANUFACTURING
No.
A
TRADE
MARK
Il2wl45
OF
COMPANY
INSTRUCTIONS
FOR
OILING
To ensure easy running and prevent unnecessary wear
of the parts
requires
or "TYPE D" OIL, sold only by Singer
oiling
which
and
are in
when
movable
contact, the
in continuous use,
Sewing
machine
''TYPE
Machine
Company, should be applied at least twice each day to
all oil holes
marked
"OIL'', as instructed in
Form
2428w.
B"
Copyright,
by The Singer Manufacturing Co.
All Rights Reserved for all Countries
U.S.A.,
1945
1939, 1940, 1941,
and
1949
ACCESSORIES -
INDEX
PAGE
[5
ATTACHMENT
BOBBIN WINDERS - -
FEED
DOGS
FOOT
LIFTER -
KNEE LIFTER
AVACHINE
MISCELLANEOUS
NEEDLE
NUMERICAL
SLIDE
- - -
NO.
HOLDERS
LIST
PLATES
---
II2wl45
PARTS
OF
PRESSER FEET -
THREAD
THROAT
UNWINDER
PLATES -
------
------
--
--
-
------
-------
PARTS
--
-- --
-
----
--
------
-- -- --
-
-- --
-- --
17
156-17
--
--
--
--
--
--
--
--25
- (Q
-
29
-16
2Q
|6
5
I8
31
19
INSTRUCTIONS
In
ordering
FIRST
column.
The
the Single Part only, except
Screws,
Studs and
together, etc.,
Every
although
when ordering
number
which
combination
not
stamped
the
from
this list, use ONLY the PART
stamped on a
Rollers
it is
of parts sent out has its
on Parts
combination.
FOR
ORDERING
number
Sewing
Spun
when
on.
Machine
the part
Small
includes
Wires
Part is the
Set
riveted,
Screws,
or Parts
necessarytofurnishincombination.
specific
number
(exceptinabove
case),
number
Clamping
must be
in the
of
soldered
which,
used
Each number
appears, or for whatever Machine.
The letters after some of the numbers indicate the style of finish
only, as follows:
A. Hardened, Polished, Nickel Plated and
B. Polished,
C. Hardened only.
D.
E. Soft, not polished.
F.
H.
J.
R.
X. Black Oxide, for Iron and
XC. Hardened and
Y. Black Nickel Plated only.
These letters MUST BE USED when they appear in the list and
AFTER the number, as in the list.
In
this
series
I to 1500,
1501to 1800, 201501 to 201800 and 351501 to
1801to2000,201801to202000
2001to50000
20000!
always
indicates the SAME PART in
Buffed.
Nickel
Plated and
Polished
Hardened
Blued.
Nickel Plated only.
Merlized.
only.
and
Polished.
Black
to 201500 and 350001 to 351500 are Screw Numbers.
and
202001to350000
and 351801 to
Buffed.
Steel.
Oxide, for Iron or Steel.
351800
are Nut Numbers.
352000
are Numbers of Machine
are Roller Numbers.
whateveV
The figures in the second column refer only to the plate in
the
illustration of the part is shown and are NOT TO BE USED in
ordering.
list it
Parts.
which
Two or more numbers over a cut indicate
such parts is not visible in an illustration.
Parts
marked
with an asterisk
are made at the factory.
(.)(.)
that
the
difference
between
are furnished only when repairs
MACHINE
TWO
BALL
FOR SHIRTS, CORSETS,
IN GAUGES FROM
240055
200378C
♦240056
236699
17817
17817
17817
17817
No.
NEEDLE.
BEARING.
Arm
with
"
Cap
" "
" " "
"
Position
"
Screw
" "
"
Shaft
" "
" " " "
200378C
Ann
Shaft
with
Arm
Shaft
Screw
Arm
Shaft
Washer
Arm
Shaft
complete,Nos.236698,240055
240056
HIGH
UNDERWEAR,
1/32
TO IV2INCHES.
202135
Screw
Washer
Pin
(3)
Washer
with
Ball
Ball
249440
Ball
Ball
Bushing
DROP
Il2wl45
SPEED.
FEED.
Name
(2)
(3)
224392
Bearing
Bearing
Bearing
Bearing
and
Collar
(back,"ball
ETC.
350431E
Collar
Collar
Retaining
with
two
240054
Set
bearing)
and
PARTS
FOR
MACHINE
No.
Il2wl45
No.
*236698
200071E
263096
223847
Plate
17817
17817
17817
17817
Arm
Shaft
" " " " Screw
" " "
" " " "
(wick)
200502H
204329
200341C
224195
224104
2006020
2003270
202253
224139
200164B
224392
350431E
224144
236061
213479
17817
17817
17817
17818
17818
17818
17818
17818
17812
17812
17817
17817
17813
17813
17813
Arm
Shaft
Thvunb
Arm
" " " "
" "
Screw
Shaft
" " " "
2003270,2006020
Arm
Shaft
Position
Arm
Shaft
Screw
Arm
Shaft
Arm
tl
Arm
Spring
Screw
Flange
Shaft
II II II II II
(2)
Shaft
" " " "
Attachment
236061
Attachment
II II II II n
Spring
248402 17817 Balsuice Vlheel
2-1/8
in.
Note:
Balance
machine
248456 17817
2003350
Wheel
imless
Balance
248402
otherwise
Wheel
(outside
in.)
350419H
2003280
3501070
2003350
2013460
*248403
202258
200570E
54897
223852
223811
223812
223853
17817
17817
17817
17817
17817
17818
17818
17812
17813
17813
17813
17813
Balance
Bed
with
Wheel
" "
II It II
" "
II It 11 n
with
"
203376
Hinge
" " "
"
Oil
"
Oup
Slide
" "
" " " "
" "
(front),for
Plates,in
inch
Bed
224043
17813
Slide
Plates,in
224044
17813
Bed
inch
Slide
Plates,in
1-23/32
Bushing
Name
(back)
(front)
Bushing
Bushing
Oonneotion
Oonneotion
Screw
Oonneotion
Oonneotion
Oonneotion
Oil
Slide
Slide
(front)
(front)
and
Packing
Plate
Plate
(disc)
diam.)
is
furnished
specified
(disc)
diam.ofbelt
2013460
Adjusting
Position
Set
Screw
Oonneotion
(3)
(back)
Stop
gauges
(front),for
gauges
(front),for
gauges
inch
Belt
two
Belt
Belt
Belt
Belt
Stop
(belt
with
"V"
and
(2)
Screw
Spring
use
from
use
from
use
from
with
Oil
Packing
Oil
Oil
Set
Pulley
202253
Pulley
Pulley
Pulley
Timing
(wick)
Screw
with
213479
Friction
groove
2003280
with
on
belt
groove
3501070
Screw
Screw
tl
(4)
with
l/32
with
17/32to1
with
1-1/32
(3)
223847
Packing
Pad
Screw
with
Slide
and
this
order
groove
2.9
Throat
to
l/2
Throat
Throat
to
Set
Plate
and
No.
203470
*248459
203648
*202056
203473
203474
241674
241675
350405C
248404
224005
201349C
201542C
203101
265088
202277
201246C
248405
200118D
236083
201016F
200594C
203216
248460
202274
202135
200462H
248406
248407
350393C
201518E
236401
236403
236477
211669
211674
211679
211685
236439
211693
211698
236452
200106E
Plate
17803
17803
17803
17803
17803
17803
17803
17804
17804
17804
17804
17804
17804
17804
17804
17804
17804
17803
17803
17803
17803
17803
17813
17813
17813
17814
17814
17814
17814
17820
17820
17820
17820
17820
17820
17821
17821
17821
17821
17821
17620
PARTS
FOR
AAACHINE No.
Bobbin
"
Case
" "
" " "
" " "
" "
" " " "
,1 II .1 11 II
" "
(chromiuiD
Latch
II II
Oiling
Opener
Plunger
Spring
" " "
201542C
Bobbin
Stud
Bobbin
Stud
Bobbin
Stud
Bobbin
with
Bobbin
Oil
Bobbin
Set
Bobbin
" "
and
Case
Case
Nut
Case
Oil
Case
202277
Case
Packing
Case
Screw
Case
" "
203101
Opener
Opener
Opener
Packing
Opener
Opener
(wick)
Opener
Opener
Tension
" " " "
Screw
Bobbin
Bobbin
Face
Feed
Feed
Case
" "
201016P,
Tension
Washer
Case
coiaplete,Nos.200594C,
202056,203216,203473,203474,
203648,236083,241674,241675,248459
and
two
350405C
Plate
" "
" "
" '*
and
II II II II
"
" " "
" " "
" " "
" " "
" " "
" " "
" " "
" " "
" " "
" " "
" "
Bar
225837
Bar
Dog,for
Position
Thumb
with
248406
Hinge
Screw
200336E
Sorew
236402
236405
236485
236427
236430
236433
236436
236441
236444
236450
236454
(2)
Il2wl45
Name
plated)
Felt
Lever
Lever
Lever
Lever
(wick)
Lever
Lever
Lever
Lever
Screw
Spring
Spring
(cloth)
Pin
Screw
with
Retainer
with
201349C,
Driving
Driving
Driving
Hinge
Stud
Hinge
Stud
Hinge
Stud
Link
Regulating
Screw
and
201535E
2000400,224052
(driving)
JJyt
Screw
Screw
Screw
8
No.
200336E
201535E
248409
248408
248410
248411
248412
200030H
248413
248414
248415
248416
200382C
248417
200350H
200369D
248471
248418
2012200
2003820
248502
248503
248420
2003470
2010070
202355
248421
2003270
2003470
202355
202625
2003830
Plate
17814
17814
17812
17814
17812
17812
17814
17814
17812
17812
17812
17812
17812
17812
17812
17812
17812
17812
17812
17812
17814
17814
17814
17814
17814
17814
17814
17814
17814
17814
17814
17814
PARTS
FOR
/MACHINE No.
Feed
Dog
ri » n H
"
with
Feed
with
Feed
Support
Driving
248410
Driving
200030H
Driving
Orank
and
Orank
Orank
Il2wl45
Name
Screw
(eccentric
248411
(rock
Oiling
" "
" " "
" " "
" "
" " "
II II II II II
Spring
Feed
Driving
Spring
Feed
Spring
Feed
It II 11 II II
Adjusting
Feed
Adjusting
Feed
Adjusting
Collar
Driving
Collar
Driving
Screw
Driving
Screw
Driving
Screw
Eccentric
Eccentric
with
Eccentric
Set
Eccentric
Eccentric
Set
Eccentric
Set
Oil
Leader.(brass)
Pinch
Adjusting
Adjusting
two
Adjusting
Screw
Friction
Friction
Screw
Friction
Screw
(fibre)
Feed
Driving
2012200,two
and
248471
Feed
Driving
" " "
" "
" " " "
201518E,248407
Feed
Driving
(left)
Feed
Driving
(left)
Feed
Driving
Pinch
Feed
Driving
Pinch
Peed
Driving
(right)
Feed
Driving
(right)
Feed
Driving
(right)
Feed
Driving
(right)
ing
(brass)
Feed
Driving
with
Peed
Driving
Set
Screw
Screw
Screw
two
(split)
Pinch
(split)
Pinch
Pinch
Pinch
2003830
Flange
each
Flange
Rock
Rock
Rock
Screw
Rock
Set
Rock
Set
Rock
Rock
Rook
Rock
Rook
Rock
Shaft
and
Shaft
Shaft
Shaft
Screw
Shaft
Screw
Shaft
Shaft
Screw
Shaft
Screw
Shaft
Screw
Shaft
Shaft
with
200350H,200369D
Position
Set
248502
3503930
Set
Set
(2)
shaft
Felt
Screw
2003820
(2)
Packing
2003820,
Screw
Bushing
Bushing
Bushing
Bushing
Packing
Bushing
Bushing
Bushing
Screw
Bushing
Screw
Stop
Stop
end)
end)
Staple
Disc
Disc
Disc
Gib
Gib
Gib
Screw
with
(left)
(left)
(brass)
Pack
Oollar
Oollar
248449
200958C
224154
224052
200040C
225837
223655
200173D
20122OC
248422
248423
248424
248425
248447
*248444
248445
248463
249365
350394E
200403C
204479
248429
248430
223867
201222C
200362C
248431
200382C
248432
249440
*236695
236696
201220C
200378C
*240056
*240058
236697
200335C
No.
PARTS FOR A\ACHINE No.
Plate
17818
17818
17812
17814
17814
17814
17814
17814
17812
17812
17812
17812
17812
17812
17803
17803
17803
17804
17804
17804
17804
Peed
Indicating
" " "
"
Lifting
" " "
and
223655
Peed
Lifting
" " " " "
" " "
II ri 11 II
Screw
Peed
Lifting
"
Regulating
" " "
" " "
" " "
Peed
Regulating
248422
Hook
(sewing)
"
248444
200590H
Hook
and
248445
Hook
Ball
" " "
II II It II II
Screw
Hook
Ball
Screw
17804
17804
17812
Hook
Ball
II II II I.
"
Driving
200362C
17812
17812
17804
17804
17812
17812
17812
17812
17812
17812
17812
17812
17812
17812
Hook
Driving
" " "
" "
200382C
Hook
Driving
" "
" " "
II II II II II
with
Hook
Driving
236695
Hook
Driving
Position
Hook
Driving
Set
Screw
Hook
Driving
taining
Hook
Driving
Hook
Driving
bearing)
and
240058
Hook
Driving
Set
Screw
Il2wl45
Name
Disc
with
Set
Eccentric
with
Pork
Eccentric
Pork
Oiling
Eccentric
Set
Stud
Cotter
Socket
Spring
Stud
to
248425
with
and
Bobbin
and
201253P
248460
complete,Nos.
203525,224025,two
Case
complete,Nos.
Bearing
Adjusting
Bearing
Packing
Bearing
and
200378C
with
Screw
Washer
(brass)
Gear
201222C
Gear
Pinion
Pinion
Shaft
and
Shaft
249440
Shaft
Shaft
Shaft
Shaft
Shaft
Adjusting
Washer
(spiral)
(2)
Position
Set
Screw
(spiral)
Set
Ball
Bearing
201220C
Ball
Ball
Ball
Ball
Bushing
Bushing
Screw
Bearing
Bearing
Bearing
Bearing
complete,Nos.236696,240056
Shaft
Bushing
200958C
Screw
201220C
with
Screw
Screw
Pin
Screw
Screw
(steel)
with
Screw
with
Collar
(back)
(back,ball
(baok)
200173D
washer
Pelt
each
ggt
Set
two
Collar
Collar
Collar
Re
10
No.
224112
201254C
202253
203525
201253P
248433
248434
223680
200327C
223681
200335C
248435
200009E
200006E
225585
248438
248439
224025
200590H
240067
200262H
223684
202302
206628
227227
200113P
240068
200262H
223686
235871
235872
200352C
202552
264718
201183D
Plate
17812
17812
17812
17803
17803
17805
17804
17812
17812
17812
17812
17804
17804
17804
17804
17805
17804
17803
17803
17813
17813
17813
17813
17813
17813
17813
17813
17813
17816
17816
17816
17816
17816
17816
17816
PARTS
FOR
A\ACHINE
Hook
Driving
Pulley
Hook
Driving
Pulley
Hook
Driving
Pulley
Hook
Gib
" "
"
saddle
201246C
Hook
Saddle
201246C
Hook
Saddle
" " " "
" " "
" " " "
" "
" "
" "
" " "
Hook
Saddle
with
Set
Spring
Screw
No.
Shaft
202253
Shaft
Screw
Shaft
Flange
(left)
(right)
Bearing
Oil
Pad
Pinch
Screw
(left)
Il2wl45
Name
Connection
Connection
Connection
with
with
(right)
Screw
(2)
Washer
coinplete,No3.
200118D,2004030,204479,224005,
248404.248405.248430.248431.248433,
248463,265088,350394E,two
248429,249365
Hook
Saddle
and
(right)
200118D,2004030,204479,224005,
248404.248405.248430.248431.248434,
248463,265088,350394E,two
248429,249365
Hook
Washer
" "
Knee
Lifter
Screw
Knee
Lifter
Rod
with
Knee
Lifter
Rod
Cotter
Knee
Lifter
Rod
Spring
Knee
Lifter
Rod
Spring
Knee
Lifter
Rod
Spring
Knee
Lifter
and
Screw
Connection
Connection
202302
Connection
Pin
Connection
Connection
Collar
Connection
Collar
Lifting
" " " "
Needle
Screw
Bar
Bushing
"
"
Connecting
(lower)
(upper)
Set
and
two
2012540
200009E
200009E
(left)
Set
Set
(felt)
(2)
four
each
248435
complete,Nos.
248435
Lever
"
Lever
Lever
Lever
Lever
200113P
Lever
Screw
each
Hinge
Lifting
Lifting
Lifting
Lifting
Lifting
four
with
Set
Lever
Hinge
Screw
(2)
Link
Oil
Belt
Belt
Belt
and
and
Screw
Screw
Screw
Guard
PARTS
FOR
A\ACHINE
No.
202333
202254
Plate
17816
17816
Needle
202254
Needle
Packing
2003740
200383C
264714
202277
17816
17816
17816
17816
Needle
Screw
Needle
Screw
Needle
200072C
Needle
(wick)
200072C
17816
Needle
202692 17816 " "
248448
203172
2004280
2003350
236650
17816
17816
17816
17816
17815
2003830,2004260
Needle
202552,223881,249398
Needle
" " "
" " "
Needle
and
must
1/32,3/64
and
223878
17815
two
Needle
15/32
223879
17815
201030F
Needle
23/32
" 201030P and two 200141F
223863
17815
Needle
3/4
201030F
in.,in
223880 17815 Needle
I-I/2
201030F
200141F
208566
207072
2003520
202554
200653C
244006
200260D
206608
235901
200054E
207965
210949
200086C
17815
17815
17816
17816
17816
17816
17816
17816
17816
17816
17816
17816
17813
17816
17816
201030F
Needle
"
Presser
" "
ti n
" "
" " "
" "
Bracket
Presser
Bracket
Presser
Bracket
Presser
200054E
Presser
" "
" " "
" " " "
No. Il2wl45
Bsir
Connectiiig
Bar
Connecting
(wick)
Bar
Connecting
Bar
Connecting
Bar
Connecting
and
Bar
Bar
Bar
Bar
202277
Connecting
Connecting
Crank
with
Crank
202692
Crank
Eriction
Position
Set
Holder,needles
be
set
and
l/l6
200141F
Holder,in
in.,in
and
Holder,in
in.,in
Holder,in
gauges
steps
two
gauges
stbps
gauges
steps
and
in.,in
and
Bar
two
gauges from
steps
two
Screw
Screw
with
Holder,in
Holder
Set
Bushing
11
Lifter
Lifting
Bar
Lifting
Guide
Lifting
Spring
Position
Position
Screw
Bar
Bar
Bar
Spring
Name
Link
Link
Link
Link
Stud
Stud
Stud
2003350,2003740,
and
202333
with
and
Washer
Screw
3/32
diagonally
in.,with
from
of
l/32
200141F
from
of
l/32
from
of
1/32
200141F
of
l/32
200141F
200074F
(2)
Screw
Hinge
Screw
Releasing
Releasing
Releasing
Guide
Guide
(flat)
Bracket
Pinch
Stud
Stud
Stud
Stud
with
Oil
Pinch
202400,
264714
Screw
in.
in
3/32
in.,with
17/32
in.,with
1/2
in.,with
25/32
in.,with
with
Pinch
with
11
vith
Oil
Set
Set
Packing
Screw
apart
gauges
201030P
to
to
to
to
(2)
Lever
Lever
Lever
Screw
200086C
Screw
12
No.
201410F
200948F
229092
229102
229103
229104
229105
229106
229107
229108
229110
200074F
223881
249398
202277
202400
202423
200383C
202401
200132E
263090
248504
200109E
201535E
*248505
223702
200159F
223705
244048
236060
223703
235072
200309E
Plate
17813
17813
17824
17824
17824
17824
17824
17824
17824
17824
17824
17816
17816
17816
17816
17816
17816
17816
17816
17816
17816
17816
17816
17816
17816
17819
17819
17819
17819
17819
17819
17816
17819
PARTS
FOR
MACHINE
Presaer
Preaeer
Presser
Presser
Thumb
"
3/32
and
from
1/32
l/l6
Bar
Screw
Bar
Foot,50
in.
F0ot,46
3/32to7/32
inch
Foot,46
1/4,9/32
Presser
Presser
Presser
from
1/32
17/32
Foot,46
11/32to1/2
inch
Foot,46
and
Foot,46
19/32,5/8,21/32
Presser
Presser
Presser
Presser
Take-up
23/32
from
1/32
from
of
1/32
Foot,46
and
Foot,46
25/32
inch
Foot,46
1-1/32
Foot
Lever
" "
" " " "
(wick)
Take-up
Lever
" " " "
(wLck)
Take-up
Lever
" "
" " " "
" " "
" " " "
248505
Take-up
Tension
Tension
Tension
Tension
Lever
11
II 11 n II
Bracket
and
236060
Bracket
Bracket
201199F,
two
each
223704,three
Disc
" "
"
Release
" " "
" " "
No.
Il2wl45
Name
Spring
Spring
apart,in
Support
needle
Regulating
hole,needles
gauges
Screw
1/32,3/64
inch
needle
needle
and
5/I6
needle
needle
9/l6
needle
needle
3/4
inch
needle
to1in.,in
needle
to
inch
and
1-1/2
in.,in
inch
in.,in
11/16
hole,in
steps
hole,in
hole,in
steps
hole,in
hole,in
inch
hole,in
hole,in
steps
hole,in
in.,in
inch
Screw
Driving
Stud
with
Oil
Hinge
Stud
with
Oil
Packing
Hinge
Stud
Set
Oiling
Felt
Wick
Oiling
tl II
Wick
with
two
Screw
complete,Nos.200978H,
223702,223703,223706,237174
13710,200309E,204271,
201572H
Position
Pin
Lever
Rod
Screw
Screw
263090
Screw
11 11
each
and
four
Screw
'
gauges
of
gauges
gauges
of
gauges
gauges
gauges
gauges
of
gauges
steps
202277
Packing
202423
with
jjut
201224B
244048
No.
223704
204271
13710
201224B
201572H
223706
200978H
237174
241360
200132E
201199P
2000610
201572H
204925
224028
236007
200582H
202741
200397H
240034
200366H
236402
236405
236485
236427
236430
236433
236436
236441
236444
236450
PARTS
FOR
MACHINE
Plate
.
17819
17819
17819
17819
17819
17819
17819
17819
17819
17819
17819
17819
17819
17819
17817
17819
17819
17819
17819
17819
17819
17820
17820
17820
17820
Tension
Thread
Release
" "
"
Spring
"
Stud
"
Thvunb
Controller
" "
Guide
" "
" " "
" "
" " *'
"
Retainer
" "
•Tliroat
Throat
Throat
Throat
3/32
and
in.,for
sizes
and
sizes
to
for
sizes
Plate,50
in.
15,in
Plate,50
14
5/32
Plate,50
14
11/32
236477
Plate,50
14 and
7/16,15/32
17820
Throat
sizes
Plate,50
14 and
9/16,9/32
17820
17821
17821
17821
Throat
Throat
Throat
Throat
sizes
to
for
sizes
to
211685
sizes
to
for
sizes
Plate,50
14
23/32
211679
Plate,50
14
7/8
Plate,50
14
I-I/8
236439
Plate,50
14
I-3/I6
17821
Throat
sizes
Plate,50
14
211693
1-9/32
" "
(lower)
apart,for
gauges
236401
and
in.,for
and
in.,in
and
and
in.,in
and
in.,in
and
in.,in
and
in.,in
and
and
I-5/I6
No.
Name
Plunger
Washer
Nut
(upper)
(2)
Set
needle
needle
15,in
needle
15,in
needle
15,in
and
l/2
needle
15,in
5/8
needle
15,in
needle
15,in
steps
needle
15,in
needle
15,in
steps
needle
15,in
Il2wl45
Disc
Spring
"
" "
Stud
"
"
"
Screw
Set
Screw
needle
1/32,3/64
gauges
236403
gauges
steps
gauges
in.,for
gauges
inch,for
gauges
steps
gauges
of
gauges
steps
gauges
of
gauges
in.,for
Screw
Stop
Screw
with
204925
Set
Screw
Thumb
Nut
Washer
(2)
Screw
(2)
hole,needles
sizes
and
hole,for
3/32,1/8
hole,for
from
of
l/32
hole,for
3/8,13/32,
211669
hole,for
1/2,17/32,
211674
hole,for
from
of
1/32
hole,for
from
l/32
hole,for
from
of
l/32
hole,for
from1to
l/32
hole,for
I-I/4,
211698
13
14
1/I6
needle
needle
3/I6
in.,
needle
needle
needle
9/l6
in.,
needle
23/32
in.,for
needle
13/16
inch,
needle
in.,for
needle
PARTS
FOR
14
MACHINE
No.
Il2wl45
No.
236454
200181D
203376
691P
Plate
17821
17820
17820
17820
These
SINGER
Throat
sizes
to
for
Throat
" "
" "
Needles
in
SINGER
Needles
are
Plate,50
14
I-1/2
236452
Plate
and
marked
Company's Trade Mark
needle
and
15,in
in.,In
Clamp
Position
Screw
should
Machines
their
with
the
"SIMAN
Name
hole,for
gauges
steps
Screw
Pin
be
used
Containers
CO.*
needle
from
1/32
1-3/8
in.,
of
'
NeedlesinContainers
"FOR
are
NOT
SINGER
SINGER
marked
MACHINES"
made
needles.
2
ACCESSORIES
15
No.
200157B
203470
228478
135x7
224121
41400
120342
120343
225498
225554
259428
259429
200113P
225453
225454
202277
259660
225455
225456
225368
2003800
225381
225444
200056E
225458
225459
225459
202478
200299H
225461
200082D
228026
2102
13710
201499H
201572H
225462
259430
Plate
17813
17803
13067
16644
13067
13067
13067
13067
13067
(SWINGING
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
Attachment
Bohbln
Screw
Needles,twelve,size
Drip'Pan,20
in.
Machine
Oiler
"
Screw
Wi-ench
Screw
(10)
Driver
in.
wire
nails
Rest
(copper
Spout,3-1/2
Driver
(steel)
BOBBIN WINDER
AUTOA^ATIC,
FOR %6 'NCH
Brake
" Clamp
" "
Frame
"
"
" "
"
" "
Pulley
"
Spindle
Stop
" "
" "
" " " "
" " " "
" "
" " " "
Tension
Bobbin
Nost13710,201572H,225461
Bobbin
round
(leather)
Screw
with
202277
Hinge
Pin
Oil
Packing
Well
Spring
with
2003800
Set
Screw
Latch
Screw
Thumb
Trip
Bracket
" "
" " "
"
Disc
"
Spring
"
Stud
" "
Winder
Winder
Name
(Bobbin
long,with
Pin
(wood)
plated)
(7-1/4
RIGHT
belt
Washer
Plunger
Lever
Lever
with
Screw
Thumb
Tension
and
Case)
14
in.
in.
DRIVE
and
(wick)
Hinge
Joint
Hinge
201499H
Washer
Nut
Tension
four
with
long
long)
HAND)
259660
Screw
Bracket
120343
Stud
Stud
and
Bracket
3/4
complete,
two
2102
Base
16
No.
259431
Plate
18312
ACCESSORIES
Universal
200056E,200082D,200113P,200299H,
202478,225368,225381,225444,225453
to
259428
wood
Bobbin
225456,225458,225462,228026,
to
screws
KNEE
LIFTER
Name
Winder
259430
3/4
two
in.,No.l2,R.H.B.
complete,Nos.
each
225459
and
228359
228486
16643
16643
Rock
" "
Lever
three
228361
228362
3502310
228363
228364
228388
3502310
3502310
16643
16643
16643
16643
16643
16643
16643
16643
Rock
Lever
228363,228367,228386
Rock
Lever
" " "
" "
" "
" " " "
" " " " "
" " " "
228455 16643 " "
228365
2005290
228386
228367
2003470
228368
16643
16643
16643
16643
16643
16643
" "
" " "
" "
" "
" " " "
Ehee
Lifter
228362,228364,228365
THREAD
FOR
THREE
225259 16257
225257
150203
225388
2003830
2010180
259658
225391
201696H
225326
225324
225322
208AL
16257
16257
16257
16257
16257
16257
16257
16257
16257
16257
16257
16257
Spool
2010180
Spool
with
Spool
» "
" " "
" «
"
Thread
" "
" "
" "
" " "
" " "
with
Bracket
wood
Bracket
Extension
Hinge
Biee
Position
Rod
Spring
Stop
complete,Nos.
UNWINDER
SPOOLS
Rest
(for
Rest
(for
2010180
Rest
Oushion
Rod
Set
Stand
with
Guide
Lock
Position
Rod
two
screws
Plate
Set
Stud
one
two
Set
Screw
Hut
with
Screw
Washer
350231C
with
7/8
228486
with
Bet
Pin
Arm
Set
Spring
Screw
Set
spool)
spools)
(felt)
Screw
2003830
Oup
208AL
200347C
in.,No.12
and
Screw
with
Set
Screw
Screw
and
with
228455
200529C
3502310
Screw
228361,
228388
(flat)
(flat)
and
and
228359,
with
225322
No.
259143
Plate
16257
ACCESSORIES
Thread
Unwinder
Name
(for
three
complete,Nos.201696H,225257,225259,
225324,225326,225388,259658,three
each
7/8
150203,225391
in.,No.12
and
wood
17
spools)
screws
224144
224146
259428
259429
200113P
225453
225454
202277
259660
225455
225456
259461
200380C
225381
225444
200056E
225458
225459
225459
202478
200299H
225461
200082D
228026
2102
13710
201499H
201572H
225462
259662
ATTACHMENT
17813
17813
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
18312
Attachment
Attachment
(SWINGING
FOR
Brake
Frame
Pulley
Spindle
Stop
Tension
Bobbin
Bobbin
and
and
Throat
BOBBIN
AUTOAAATIC,
"V"
"
" "
"
"
" "
"
" "
"
" "
" "
" " " "
" " " "
" "
" " " "
" "
" " "
"
"
"
" "
plete,
two
236061
236061,for
Plates
WINDER
BELT
(leather)
Clamp
with
Hinge
Oil
Packing
Spring
with
Set
Latch
Thumb
Trip
Bracket
Disc
Spring
Stud
Winder
Nos
2102
Winder
SLIDE
Slide
Plate
Slide
Plate
use
RIGHT
DRIVE
Screw
202277
Well
Plunger
Screw
Screw
and
Pin
(wick)
Washer
2003800
Lever
Lever
with
Screw
Thumb
Tension
.13710,201572H,
and
Tension
PLATES
with
with
with
HAND)
259660
Hinge
Joint
Hinge
201499H
Washer
Nut
Bracket
213479
213479
depressed
Stud
Stud
Screw
com
225461
Bracket
and
Base
18
No.
259462
Plate
18312
BOBBIN
WINDER
Name
Universal
Bobbin
Winder
complete,Nos.
200056E,200082D,200113F,200299H,
202478,225381,225444,225453
225456,225458,225462,228026,259428,
259429,259461,259662,two
225459
and
wood
screws
12,R.H.B.
3/4
to
each
in.,No.
211669
211674
211679
211684
211685
211693
211694
211698
211739
212571
236401
236403
236411
236415
236416
236419
236423
236439
236440
236447
236452
236453
236456
236458
236464
236466
236469
236470
236471
236477
17820
17820
17820
17821
17821
17821
17821
17821
17821
17822
17820
17820
17822
17822
17822
17822
17822
17821
17821
17822
17821
17821
17823
17823
17823
17821
17823
17822
17823
17820
FEED
Feed
U II II
tl
tf
II II II
tl II II
11 II It
n II II
It It
11 II
II
ri
M
It
It
II It II
It It
It II
II
II II It
II
tl
II 11 It
It
It
11
II
tl
II II
It
Dog,for
tl II
It
tl
tl tl
11
It II
It II
II tl
tl
tt
II It
II II
II tl
II
It
II
Does
II
tl
tl
It
tl
tl
tl
It
It
tl
tt
tl
tl
2364=27
236430
236433
236436
236436
236444
236444
236450
236462
236408
236402
236404
236412
236417,
236417,
236420
236424
236441
236441
236448
236454
236454
236457
236459
236463
236462
236468
236417,
236457
236485
to
to
to
to
to
to
to
and
and
to
to
to
236418
236418
to
to
to
to
and
and
and
to
and
and
236418
236429
236432
236435
236438
236438
236446
236446
236451
236472
236410
236406
236414
and
and
236422
236426
236445
236443
236449
236455
236455
236461
236467
236472
and
236650
17815
NEEDLE
Needle
and
1/32,3/64
and
HOLDERS
Holder,needles
must
be
set
and
two
200141F
diagonally,in
l/l6
3/32
in.,with
in.
apart
gauges
201030P
No.
223878
223879
223863
223880
Plate
17815
17815
17815
17815
NEEDLE
Needle
15/32
201030P
Needle
to
with
Needle
3/4
201030P
Needle
I-I/2
201030P
Holder,in
in.,in
Holder,in
23/32
201030F
Holder,in
in.,in
Holder,in
in.,in
HOLDERS
steps
and
two
in.,in
and
steps
and
two
steps
and
two
Name
gauges
200141P
gauges
steps
two
gauges
of
200141P
gauges
200141P
of
1/32
of
from
1/32
from
of
200141P
from
from
1/32
3/32
in.,with
17/32
1/32
1/2
in.,with
25/32
in.,with
19
to
in.,
to
to
229008
229092
229101
229102
229103
229104
229105
229106
229107
229108
229110
222226
17824
17824
17824
17824
17824
17824
17824
17824
17824
17824
17824
17825
PRESSER
Presser
Presser
Presser
Presser
Presser
Presser
Presser
Presser
Presser
Presser
Presser
Presser
Foot,50
3/32
in.
and
I/I6
Poot,50
3/32
in.
and
I/I6
Poot,50
3/32
in.
and
1/I6
Foot,46
from
3/32to7/32
1/32
inch
Foot,46
1/4,9/32
Foot,46
from
11/32to1/2
1/32
inch
Foot,46
17/32
and
Foot,46
19/32,5/8,21/32
Foot,46
23/32
and
Foot,46
from
25/32to1
1/32
inch
Foot,46
from
I-I/32
of
1/32
Foot,46
3/16,7/32
FEET
apart,in
inch
apart,in
inch
apart,in
inch
and
9/l6
3/4
inch
and
5/I6
to
needle
needle
needle
needle
needle
needle
needle
inch
needle
and
needle
inch
needle
in.,in
needle
I-I/2
needle
1/4
hole,needles
gauges
hole,needles
gauges
hole,needles
gauges
hole,in
in.,in
hole,in
inch
hole,in
in.,in
hole,in
hole,in
11/16
hole,in
hole,in
hole,in
in.,in
hole,in
inch"
1/32,3/64
1/32,3/64
1/32,3/64
steps
steps
inch
steps
gauges
of
gauges
gauges
of
gauges
gauges
gauges
gauges
of
gauges
steps
gauges
20
No.
229542
229559
229572
229573
229575
229577
229578
229604
224153
224148
224150
200175H
230795
202090
229013
229014
299093
229095
229097
229099
229128
229132
229134
229138
229140
229162
229261
229263
229276
229279
229281
229283
229285
Plate
17825
17824
17824
17825
17825
17825
17825
17825
17826
17826
17826
17826
17826
17828
17826
17826
17826
17826
17826
17827
17827
17827
17827
17827
17827
17827
17827
17828
17828
17828
17828
17828
17828
Presaer
from
1/32
Presser
3/32
and
Presser
3/32
and
Presser
from
1/32
Presser
from
1/32
Presser
from
1/32
Presser
from
1/32
Presser
from
of
Presser
3/32
and
224150,for
Presser
from
1/32
for
Presser
PRESSER
Foot,46
1/8
to
in.,with
Foot,50
in.
apart,in
1/16
in.,for
Foot,50
in.
apart,in
I/I6
Foot,46
3/32
inch
Foot,46
9/32
inch
Foot,46
9/16
inch
Foot,46
3/4
inch
Foot,46
1-9/32
1/32
inch
Foot,50
in.
I/I6
Foot,46
3/32tol/4
in.,with
stitching
Foot
FEET
needle
1/2
inch
to
1/4
to
17/32
to
23/32
to
1-1/4
to
apart,in
in.,with
stitching
Spring
Hinge
Plate,
Name
in.,in
200172H
needle
gauges
felling
needle
gauges
needle
in.,in
needle
needle
needle
in.,in
needle
1-3/4
needle
gauges
200175H
needle
in.,in
200175H
shoe
Guide
" "
Pin
for
ri
ti 11
tt ti
II II
11
It
If 11
It tl
11
II
II 11
ti
11
II II
II
tl
II
II
hole,in
steps
and
hole,needles
hole,needles
hole,in
steps
hole,in
in.,in
hole,in
in.,in
hole,in
hole,in
in.,in
hole,needles
shoe
hole,in
steps
and
vamps
Screw
229012
11
229015
229094
229096
229098
11
229100
tl
229129
229133
229135
M
229139
If
229141
229163
ft
229262
tl
229264
229278
11
229280
II
229282
tl
229284
tl
229286
gauges
of
229541
1/32,3/64
1/32,3/64
gauges
of
gauges
steps
gauges
steps
gauges
steps
gauges
steps
1/32,3/64
and
vamps
gauges
of
224150,
(right)
of
of
of
PRESSER
FEET
21
Wo.
229720
230830
229184
223900
223903
229195
229168
229164
229191
229193
229197
229201
229203
229215
229217
229321
229368
229560
229839
229964
229144
229146
229148
229152
226080
202923
202926
202930
229277
229541
200172H
229012
229015
229094
229096
229098
229100
Plate
17828
17828
17828
17829
17829
17829
17829
17829
17829
17829
17830
17830
17830
17830
17830
17830
17830
17830
17831
17831
17831
17831
17831
17831
17831
17826
17826
17831
17828
17825
17825
17826
17826
17826
17826
17826
17827
Presaer
Presser
Presser
from
inch
needle
to
5/8
Foot
l/8
Foot
Fool
hole,in
in.,in
Nos.202926,229013
Presser
Presser
Presser
Presser
Presser
Foot
needle
to
202923,229014
3/4
hole,in
in.,in
Foot
needle
3/16
230795
hole,in
in.,Nos.202923,229093
Foot
needle
and
230795
hole,in
5/16
Foot
needle
13/32
229097
hole,in
and
and
Foot
needle
5/8
202923,229099
hole,in
in.,in
Name
Plate,for
Shank
Spring
to
1/2
Spring
(hinged)
(hinged)
(hinged)
(hinged)
steps
steps
and
Spring
Guide,In
in.,in
Guide
gauges
and
gauges
230795
gauges
gauges
230697
230831
229935
223901
223904
229167
229169
229188
229192
229194
229198
229202
229204
229216
229218
229322
229369
229561
229840
229965
229145
229147
229149
229153
steps
Screw
complete,46
from
of
l/32
230795
complete,46
from
of
1/32
complete,46
1/8,5/32
complete,46
7/32,1/4,9/32
in.,Nos.202923,229095
(hinged)
7/16
230795
(hinged)
steps
complete,46
gauges
11/32,3/8,
in.,Nos.202923,
complete,46
gauges
and
of
230795
from
1/32
gauges
of
15/32
in.,
17/32
in.,Nos.
and
15/32
in.,Nos.
l/32
and
and
to
22
No,
229129
229133
.229135
229139
229141
229163
229262
229264
229278
229280
229282
229284
229286
Plate
17827
17827
17827
17827
17827
17827
17827
17828
17828
17828
17828
17828
17828
230697 17828
PRESSER
Presser
needle
in
gauges
Nos.202923,229128
Presser
needle
and
230795
Presser
needle
FEET
Foot
Name
(hinged)
hole,needles
1/32,3/64
Foot
(hinged)
hole,in
5/16
Foot
hole,in
gauges
in.,Nos.202923,229132
(hinged)
gauges
complete,50
3/32
and
and
230795
complete,46
7/32,1/4,9/32
complete,46
11/32,3/8,
l/l6
in.
apart,
in.,
13/32 and 7/16 in.,Nos.202923,229134
and
230795
Presser
Presser
Presser
Presser
Presser
Presser
Presser
Presser-
Presser
Presser
Presser
Foot
needle
5/8
in.,in
202923,229138
needle
23/32
and
230795
needle
and
3/I6
230795
needle
3/8
in.,in
202090,202923
needle
15/32
and
229263
needle
and
7/32
229277
needle
5/I6
229279
needle
13/32
229277
needle
9/I6
229283
needle
21/32
229277
needle
1/2
in.,in
202090,202923
work
(hinged)
hole,in
steps
Foot
(hinged)
hole,in
and
3/4
Foot
(hinged)
hole,in
in.,Nos.202923,229162
Foot
(hinged)
hole,in
steps
Foot
(hinged)
hole,in
and
1/2
Foot
(hinged)
hole,in
in.,Nos.202090,229276
Foot
(hinged)
hole,in
in.,Nos.202090,229277
FOot
(hinged)
hole,in
and
7/16
and
229281
Foot
(hinged)
hole,in
in.,Nos.202090,229277
Foot
(hinged)
hole,in
and
II/I6
and
229285
Foot
(hinged)
hole,in
steps
complete,46
gauges
and
gauges
of
1/32
230795
complete,46
from
15/32
in.,Nos.
21/32,11/16,
in.,Nos.202923,229140
complete,50
gauges
3/32,l/s,5/32
complete,46
gauges
and
of
229261
1/32
from
3/I6
in.,Nos.
complete,46
gauges
13/32,7/16,
in.,Nos.202090,202923
complete,46
gauges
gauges
1/8,5/32,3/16
complete,46
1/4,9/32
and
complete,46
gauges
11/32,3/8,
in.,Nos.202090,
complete,46
gauges
1/2,17/32
and
complete,46
gauges
19/32,5/8,
in.,Nos.202090,
complete,46
gauges from
of
l/32
and
229720,for
3/I6
in.,Nos.
strip
and
to
and
to
and
and
and
to
PRESSER
FEET
23
No.
230831
229935
223901
223904
229167
229169
229188
229192
229194
229198
229202
229204
229216
Plate
17828
17829
17829
17829
17829
17829
17829
17829
17829
17830
17830
17830
17830
Presser
Presser
Foot
needle
7/8
202923,230795
needle
and
in.,in
Foot
5/16
hole,in
hole,in
230795.
from
Presser
Presser
Presser
Presser
Presser
regular,for
Foot
needle
in
and
needle
and
230795,for
hole,needles
1/16
223900,for
Foot
hole,in
3/16
Foot
needle
and
230795,for
needle
and
230795,for
needle
3/16
hole,in
5/16
Foot
hole,in
5/16
Foot
hole,in
in.,Nos.202926,229164
230795.Hinge
from
Presser
Presser
Presser
Presser
Presser
Presser
regular,for
Foot
needle
in
Nos.202923,229191
felling
needle
5/32
and
needle
13/32
229197
needle
5/8
202923,229201
needle
23/32
and
needle
and
230795.Hinge
from
hole,needles
gauges
Foot
hole,in
and
230795,for
Foot
hole,in
and
and
Foot
hole,in
in.,in
Foot
hole,in
and
230795,for
Foot
hole,in
5/16
regular,for
Name
(hinged)
steps
(hinged)
gauges
of
and
gauges
complete,48
from
l/32
230830,for
complete,46
7/32,1/4,9/32
in.,Nos.202926,229184
Hinge
pin
set
back
felling
(hinged)
in.
gauge,Nos.202090,202923
(hinged)
in.,Nos.202923,223903
felling
(hinged)
felling
gauges
gauges
complete,50
3/32
complete,50
3/32,1/6,5/32
complete,46
7/32,1/4,9/32
in.,Nos.202923,229195
felling
(hinged)
in.,Nos.202923,229168
felling
(hinged)
pin
(hinged)
1/32,3/64
(hinged)
3/16
(hinged)
7/16
230795,for
(hinged)
steps
(hinged)
3A
(hinged)
in.,Nos.202926,229215
pin-set
complete,46
gauges
gauges
complete,46
set
felling
7/32,1/4,9/32
1/8,5/32
back
complete,50
3/32
and
and
230795,for
complete,46
gauges
3/32,1/8,
in.,Nos.202923,229193
felling
complete,46
gauges
11/32,3/8,
in.,Nos.202923,
felling
complete,46
gauges
and
gauges
in.,Nos
felling
gauges
from
of
1/32
230795,for
complete,46
21/32,11/16,
.202923,229203
complete,46
7/32,1/4,9/32
back
felling
3/4
ln.,Nos.
1/16
in.
and
l/l6
in.
l/l6
15/32
in.,Nos.
1/16
to
felling
and
apart,
and-
and
and
and
in.
apart,
in.,
felling
and
in.
in.
to
24
PRESSER
FEET
No.
229218
229322
229369
229561
229840
229965
229145
229147
229149
229153
248510
226080
248455
248511
201031P
248452
248508
248453
Plate
17830
17830
17830
17830
17831
17831
17831
17831
17831
17831
17831
17831
17831
17831
17831
17831
17831
17831
Preaser
Presaer
Presaer
Presser
Presser
Presser
Foot
needle
3/16
and
in.
hole,in
in.,Nos.202930,229217
230795.Hinge
from
Foot
needle
3/16
230795.
from
hole,in
in.,Nos.202926,229321
Hinge
regular,for
Foot
needle
3/16
230795,for
hole,ingauges
in.,Nos.202923,229368
Foot
needle
13/32
and
in.
hole,in
and
230795.Hinge
from
Foot
needle
23/32
and
hole,in
and
230795,for
Foot
needle
5/8
hole,in
in.,in
202930,229964
set
back
felling
Presser
Presser
Presser
Presser
Presser
Foot
needle
to
Nos.202923,229144
hole,in
15/16
Foot
needle
1-1/32
229146
hole,in
and
and
Foot
needle
1-5/32
229148
hole,in
and
and
Foot
needle
1-7/16
Nos.202923,229152
hole,in
in.,in
Foot
" " "
" "
Presser
Presser
Foot
needle
1/4
and
hole,in
in.,Nos.226080,230795,248455
248510
Foot
" "
201535E
and
Name
(hinged)
gauges
regular,for
(hinged)
gauges
pin
(hinged)
felling
(hinged)
gauges
7/l6
in.,Nos.202926,229560
regular,for
(hinged)
gauges
3/4
in.,Nos.202926,229839
felling
(hinged)
gauges
steps
and
l/8
in.
(hinged)
gauges
in.,in
steps
(hinged)
gauges
1-1/16
230795
(hinged)
gauges
1-3/16
230795
(hinged)
gauges
steps
Plate
Spring
Shank
(hinged)
gauges
Screw
Spring
350422J
complete,46
1/8,5/32
pin
set
back
felling
complete,46
1/8,5/32
and
set
back
felling
l/l6
complete,46
1/8,5/32
and
complete,46
11/32,3/8,
pin
set
back
felling
complete,46
21/32,11/16,
complete,46
from
of
l/32
230795.
from
15/32
in.,Nos.
Hinge
regular,for
complete,46
from
25/32
of
and
l/32
230795
complete,46
31/32,1,
in.,Nos.202923,
complete,46
1-3/32,1-1/8,
in.,Nos.202923,
complete,46
from
of
and
1-7/32
l/32
230795
complete,46
3/16,7/32
Guide
Bracket
and
1/8
and
in.
and
l/l6
to
pin
in.,
to
in.,
emd
with
No.
350422J
201535E
248512
248507
248509
Plate
17831
17831
17831
17831
17831
PRESSER
Presser
Foot
FEET
Spring
Name
Guide
" " " " " "
Presser
Presser
Presser
Foot
Guide
and
1/4
248453
3/16,7/32
plete,
in.
,Nos.201031F,248453,248507
248508
(hinged)
complete,in
in.,Nos.201031F,248452,
and
248511
Foot,46
Foot
in
and
with
gauges
needle
l/4
Spring
3/16,7/32
with
gauges
hole,in
inch
Guide
Screw
Spring
3/16,7/32
gauges
com
and
25
Stud
Nut
1/4
and
236402
236404
236405
236406
236408
236409
236410
236412
236413
236414
236417
17820
17820
17820
17820
17822
17822
17822
17822
17822
17822
17822
Nos
Nos
Nos
THROAT
Throat
3/32
and
in.,for
236404
Throat
sizes
and
Throat
sizes
and
Throat
sizes
1/8
236408
Throat
sizes
7/32
Throat
sizes
7/32
Throat
sizes
3/16
236412
Throat
sizes
9/32
Throat
sizes
9/32
Throat
sizes
1/4
Throat
sizes
to
for
PLATES
Plate,50
in.
apart,for
15,in
gauges
236401
to
236406,for
Plate,53
12
and
5/32
inch
Plate,50
14
and
5/32
inch
Plate,46
16
and
inch
to
236410,for
Plate,53
12
and
inch
Plate,50
14
and
inch
Plate,46
16
and
inch
to
236414,for
Plate,53
12
and
inch
Plate,50
14
and
inch
Plate,46
16
euid
inch
Plate,50
14
and
7/I6
in.,in
236415,236416
needle
hole,needles
needle
1/32,3/64
236403
needle
13,in
needle
15,in
needle
18,in
needle
13,in
needle
15,in
needle
18,in
needle
13,in
needle
15,in
needle
hole,for
gauges
hole,for
gauges
hole,for
gauges
212571
hole,for
gauges
hole,for
gauges
hole,for
gauges
236411
hole,for
gauges
hole,for
gauges
hole,for
18,ingauges
needle
15,in
steps
gauges
and
hole,for
of
236470
sizes
and
3/32,1/8
3/32,1/8
3/32
3/l6
3/I6
5/32
l/4
l/4
7/32
from
l/32
14
I/I6
needle
needle
needle
and
needle
and
needle
and
needle
and
needle
and
needle
and
needle
and
needle
7/32
in.,
Loading...