SINGER 112W140 User Manual

SINGER

112W140

Form 2466w

R«v, (^45) Printed in U. S. A.

,7 r

LIST

PARTS

MACHINE No. Il2wl40

A T R A D E M A R K O r

THE SINGER MANUFACTURING COMPANY

;iONS FOR OILING

0 To ensure easy running and prevent unnecessary wear of

the parts which are in movable contact, the machine requires oiling and when in continuous use, 'TYPE B" or "TYPE D” OIL, sold only by Singer Sewing Machine Company, should be

applied at least twice each day to all oil holes marked

' OIL", as instructed in Form 2427w.

"TYPE D" OIL is stainless.

INDEX

Page

Accessories...................................... 15

Arm Gap and Thread Guide...

AtLaolmiont Glide Plates,...

Bobbin Winder

" " "v" Belt Drive

............ .....................

..................

.....................

1941, 1944 and 1945

by The Singer Manufacturing Co.

peed Dogs . ...

pdjoL Lifter

Knee Lifter

Machine ......................................... 5

Miscellaneous Parts............................. 30

Needle Holders

Numerical List of Parts

Prosser Feet

Strip Reels

Strip Tension Device

Thread Unwinder..................................... H

Throat Plates

...............................

...................................

.....................................

.................................

........................

......... .

.................................

..................................

.........................

28-29

...........................

¿TRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the PART number In

the FIRST column.

The number stamped on a Sewing Machine Part Is the num

ber of the Single Part only, except when the part Includes Set Screws, Clamping Screws, Studs and Rollers Spun on, Small Wires riveted, or Parts soldered together, etc.,which It Is necessary to furnish In combination.

Every combination of parts sent out has Its specific

number which, although not stamped on Parts (except In above case), must be used when ordering the combination.

Each number always indicates the SAME PART In whatever

list It appears, or for whatever Machine.

The letters after some of the numbers indicate the

style of finish only, as follows:

A. Hardened, Polished, Nickel Plated and Buffed. B. Polished, Nickel Plated and Buffed. C. Hardened only. D. Polished only. E. Soft, not polished. F. Hardened and Polished.

H. Blued. J. Nickel Plated only. R. Merllzed. X. Black Oxide.

XC. Hardened and Black Oxide.

Y. Black Nickel only.

These letters MUST BE USED when they appear In the list

and AFTER the number, as In the list. In this series:

200001 to 201500 and 350001 to 351500 are Screw Numbers. 201501 to 201800 and 351501 to 351800 are Nut Numbers. 201801 to 202000 and 351801 to 352000 are Roller Numbers. 202001 to 350000 are Numbers of Machine Parts.

The figures In the second column refer only to the

plate In which the Illustration of the part Is shown and

are NOT TO BE USED In ordering.

Two or more numbers over a cut Indicate that the dif ference between such parts Is not visible In an Illustra tion.

Parts marked with an asterisk (») are furnished when repairs are made at the factory.

LIST OF PARTS COMPLETE

FOR

INE No. II2wl40

/’two NEEDLE HIGH SPEED COMPOUND FEED

BALL BEARING, SAFETY CLUTCH

For Corsets, Cloaks and Clothing Generally

Made in gauges irom 1/32 to I 1/2 inches.

No.

,:4S401

224002

20027 811

20'i’2 48

204235

200004E 202005 24B440 '249440 240054

240055

2003780

Plate

—

17 811 17811 17 8.11

17 806 17 80 6

17806 ro’ii 17811

17 8 LI

17811

.iv.nn with lOttlhh

" (iap

” " Scrow ” " " V/asher " Position Pin (2)

Screw (3)

" " Washer (.3)

" Shalt with 221392 and 550131F, " " Bail Bearing

" " " " (ioJlai' wlLii two

iiOOoVUC

ilraii Shaft Hail Bearing Collar 240UB4

with 24 94 40

/'irm Shaft Ball Bearing Co.Ilar Set

Scrow

Name

Wo.

‘240056

*240053 17811

240057

2003350 17811

263096

223847

200502H 17811

204329

200341C 17811

224103 224104

200602C

2003270

202253

224139

200164B

224392

350431E

224144

236061 213479

248456

248402

Note; Balance

350419H 17811 2003280 17811 3501070 17811 2003350 201346C 17811

♦248403

202258 200570E 17806

54897

223852

Plate 17811

17811

17811 17811

17811

17806

17808

] 7811 17811 16290

16290 16290

17811

machine

17811 " " Set Screw

17806

17 808

16290

PARTS FOR MACHINE NO m2wIA0

Arm Shalt Ball Boarinj, liet,a .1 n:l rif

Washoi’

Arm Shaft Dushlnr (haei.;) Arm Shaft Beahliir (back) (b.-li banr-

ing) comj:)leLe,r']u3 cMOOST , F40055 and 240056

Arm Shaft Bushing (leack) Set Scrijw

" " " (front) with 223847

(wick)

Arm Shaft Bushing (front) Oil Packing

Thumb Screw

Arm Shaft Bushing (I'i'ont) 011 Fad

" " " '' Pulley wlt.h

2003270,2006020 --nd two 202153

Arm Shaft Oonnectloii Belt P\iile-y Pool-

Arm Shaft Connection Belt Pulley Set,

Arm Shaft Oonuection Belt Pull>.;y

Arm Shaft Connection Belt Timing

Arm Shaft Oil Pack I no (wick!

" " " " Stop SC!‘-V;

AttacJimont Slide Plate with 2.13479 and

Attaclunent Slide Plate Friction Slide

Spring

Balance Wheel (disc) "v’’ bolt groove

In ) with 2013466 and 350107C

Balance Wheel (disc) (l)elt, gioove

2-1/8 In.dlam.) wllli 20(1328C and

200335C Screw Wheel 248402 Is furnlstioci wlLli this unless otherwise spec ltdod on order. Balance Wheel Adju.stliig Screw

" " Position Screw

M 11 n P

M II M n Bed with 203376

" Hinge Connection (2) " " " Screw (4) " Oil Cup (3)

Bed Slide (back)

Connection Belt

tlon Screw

Screw

Spring flange 2015420 and 203101

Plate

Plate Screw (2) Stud Nut

236061

" " " ”

(outside diam.of belt groove 2.9

■lilJIlO

" Oil PackI.ni.’ 224044

" " Set Sci'ew

No. 223811 223812

223853

224043

2 031 7(J

*248459

203648

*202056

203473 203474 241674 241675 350405C 248404

224005

201349C

201542C

203101

265088

202277

201246C

248405 200118D 236083 201016F

200594C

203216 248460

210911

202135 200473H 248406

248407

350393C 201518E

PARTS FOR MACHINE NO. M2wH0

Plate 16290 16290 ieS90

16290

17 803

17803

17 803 17 803 17 803 17 803 17803

17804 17 804

17804

17 804

17804

17 804

17804 17804 17803 17803

17 803 17 803 17803

16290 16290 16290 1 7 807 17807

17 807 17807

Bod Slide (back) Stop

" " " " Spring

" ” (f.ront), .for изе v;lth Throat

Plates,In gauges from l/32 to l/2 .1. rich

Bed Slide (front),for use with Throat

Plates,In gauges from 17/32 to 1 Inch

Bed Slide (front),for use with Throat

Plates,jn gauges from l-l/SS to

1-1/2 inch

Bobbin (2)

" Case (chromium plated) " " Latch " " " Pin " " " Plunger " " " Spring " " Oiling Felt " " " " Retainer

" " " " " Screw

" " Oponer

" " " Lever with 201349C,

Bobbin Case Opener Lever Driving Screw

Stud

Bobbin Case Opener Lever Driving Screw

Stud Oil Packing (wick)

Bobbin Case Opener Lever Hinge Stud

with 202277

Bobbin Case Opener Lever Hinge Stud

Oil Packing (wick)

Bobbin Case Opener Lever Hinge Stud

Set Screw

Bobbin Case Opener I,ever Link

" " " Screw " " Tension Spring " " " " Regulating

Bobbin Case Tension Spring Screw

" " Washer (cloth)

Bobbin Case complete,Nos.200594C,

201016F,202056,203216,203473,203474 203648,236083,241674,241675,248459

and two 350405C

Face Plate

" " Position Pin " " Thumb Screw

Feed Bar with 200336E and 201535E

" " 248406 with 2000400,224052

and. 225837

Feed Bar Hinge Screw (driving)

" " " " Nut

Na.rae

PARTS FOR MACHINE NO. M2w|/i0

, .. i*' No. P.late

224058 .16298

223637 16254

223639 16254

223638 16254

223634 16254

223641

200106E 200336E 201535E 248409

16255

16254 17807 17807 17808

248408 17807

248410 248411

248412 200030H 248413 248414 248415 248416

17808 17808 17807 17807 17808 17808 17808 17808

200382C 17808

248417 200350H

200369D

248441

17808

248418 17808

201220C 17808 200382C 17808 223650 17807 248419 17807

Feed Dog,50 needle Nolo,ueediee l/8

Najnn

In. apart, fop'needlo s.tzos .14 and 15 In gauges 1/32,3/64 ;ind l/l6 in., for 224059

Feed Dog,50 needlr; hole, lor needle

sizes 14 and 15, In g.sugos 3/32,1/8

and 5/32 .in., for 224 030

Feed Dog,50 needle hole,for needle

sizes 14 and 15, In g.auges 3/l6 and

7/32 in.,for 224031

Feed Dog,50 needle hole,for needle

sizes 14 and 15,1n paug(;3 fi’om 1/4

13/32 in.,in steps of 1/32 in.,

for 223884

Feed Dog,50 needle hole,.for needle

sizes 14 and 15, in gauges fr(...ni 7/l6 to 31/32 in.. In steps ol' 1/32 in., for 224033

Feed Dog,50 needle hole,for noodle

sizes 1.4 and. 15,.In gauges i’rorn I to I-I/2 in.,in steps oJ' 1/32 Ln.,for 224035

Feed Dog Screw (2)

" " Sujjport .Screw

n M II n

riut

" Driving Crank (Eccentric End)

with 248410 and 248411

Feed Driving Crank (Rock Shaft End)

with 200030H

Feed Driving Crank Oiling Felt

" " " Staple " Oil Leader (brass) " Pinch Screw

Eccentric

'' Adjusting Disc " " " Spring

11 II M M

Collar with two 200382C

Feed Driving Eccentric Adjusting Disc

Spring Collar Set Screw

Feed Driving Eccentric Friction Gib

M It II It t|

Adjusting Screw

Feed Driving Eccentric Friction Gib

Adjusting Screw Set Screw

Feed Drlvin.g Eccentric Friction Gib

Adjusting Screw Set Screw Packing

(brass)

Feed Driving Flange with 200382C,

201220C,two each 200350R,200369D and 248441

Feed Driving Flange Position Screw

" " " Set Screw " " Rook Shaft " " " " 223650 with

201518E,248407 and 350393C

No.

248420

200347C

201007C

202355

248421

200327C

200347C

202355

224141

200019E

202625

2003830

248449 2009580

Plato 17807

17807

17 807

17807

17B07

17807

17806

17806 224154 17808 224052

200040C 225837 223655 200173D 2012200 248422

248423 248424 248425 248447

17807

17B08

17808

17808 17808 17808

*248444

248445

248463

249365 350394E

200403C

204479

248430 248429

17803

17804 17804 17804

17804

17804 17804

PARTS FOR MACHINE NO. Il2wl40

Name

Feed Driving Rock Shaft Bushing (left)

(spilt)

Feed Driving Rock Shaft Bushing (loft)

Plncti Screw

Feed Driving Rock Shaft Bushing (left)

Pinch Screw Set Screw

Feed Driving Rock Shaft Bushing (left)

P.Inch Screw Set Screw Packing

(brass )

Feed Driving Rock Shal't Bushing

(rlglit) (split)

Feed Driving Rock Shaft Bushing

(right) Pinch Screw

Feed Driving Rock Shaft Bushing

(right) Pinch Screw Set Screw

Feed Driving Rock Shaft Bushing

(right) Pinch Screw Set Screw Pack

ing (brass)

Feed Driving Rock Shaft Crank with

200019E

Feed Driving Rock Shaft Crank Pinch

ocr cw

Feed Driving Rock Shaft Stop Collar

with two 200383C (2)

Driving Rock Shaft Stop Collar

Set Scrow

Feed Indicating Disc with 200958C

" " " Set Screw " Lifting Eccentric with 201220C " " " Fork with 200173D

and 223655

Food Lifting Eccentric Fork Screw

" ” " " " Washer " " " Oiling Felt

" " " " " Screw " " " Set Screw " Regulating Stud

" " " Cotter Pin " " " Socket " " " Spring

Feed Regulating Stud complete,Nos.

248422 to 248425

Hook (sewing)

" 240444 with 203525,224025,two

each 200590H and 201253F

Hook and Bobbin Case complete,Nos.

248445 and 248460

Hook Ball Bearing

" " " Adjusting Screw " " " " " Set

Screw

Hook Ball Bearing Adjusting Screw Set

Screw Packing (brass)

Hook Ball Bearing Washer (felt)

" " " " (steel)

PARTS FOR MACHINE NO. il2wi/,o

PARTS FOR MACHINE NO. Ii2wi40

No.

223867

201222C

Pinte 17808

17808 2003620 17 800 248431

17804

200382C 17804 248432 249440

*240060

240061

2012200

2003780

*240056

*240058

240063

17808 17808 17808

17808

17608

17808 17608

2003270 17808

224112

2012540

202253

203525 201253F 248433

248434

223680

17808

17803 17803 17805

17804

17808

2003270 17808

223681

17808 2003350 17808 248435 200009E 248438

248439

200006E 225585

17804 17804 17805

17804

17804 17804

riajtio

" " " " Hinge

Nook Driving Goar (spJr'.l ) w i Ui

2003620 and 2012220 (r)

Hook Driving Gear Position Screw

" '' " Sot Screw " " Pinion (npii-ti) with two

2003820

Hook Drlv.i.ng Pinion Set Screw

” " Shaft " " Bal.l Be.an,r 1 !](':

" " " " Ooil-nr’ with

2003/80 and 2012200

Hook Drivln.g Shaft Rail. Bonring Collar

240060 with 249440

Hook Driving Shaft Bali Bearing Collar

Position Screw

Hook Driving Shaft Ball Be-a.rJng Collar

Set Screw

Hook Driving Shaft Ball Bo.aidng Re

ta in in;' Washoi' .Hook Driving Slinil. Husliiiig (had:) Hook Driving Sliafl. Buniiiiig (back)

No. 224025 2О05Э0Н 240067 20026211

223684

202302

206628

227227

200113F

240060 20026211 223600

2382Ы 264710 201183D

PJ a to 17 803 17 803 16290 16290

162 90

16290

162 90

16290

162 90 182 90 17 809

17809

17009

17809

Hook Washer

" " Screw

Knee Lifter Connection Lever

Screw

Knee Lifter Oo.nnectlon Lever Lifting

Rod with 202302

Knee Lifter Connection Lever Lifting

Rod Cotter Pin

Knoo Lifter Connection Lover Lifting

Rod Spring

Knee Llfl.er Coiinoction Lever Lifting

Rod Spring Collar with 200113F

Knee Lifter Connection Lever Lifting

Rod Spring Collar Set Screw

Knee I,liter Lli'tlng Lover

" " '' " Hinge Screw

Needle Bar

" " Connecting Link " " " '' Oil Guard

n M II 11 II

(hai L bearing) Ci.i.iig-ie to, Nos . i.40056, Screw

240058 and 240061

Hoojf Driving Shal't Bushing (back) Sot

Screw

Hook Driving Shaft Connection Bolt

Pulley with 202253 and two 2012540

Hook Driving Shal't Connection Beit

Pulley Set Screw

Hook Driving Shaft Connection Beit

Pulley Spring Flange

Hook Gib

" " Screw " Saddle (left) with 200Ü09E a.nd

201246C

Hook Saddle (right) with 200009E .and

201246C

Hook Saddle Bearing (ieit)

H 11 M Ч о u о

.............

(cJ&l't)

bet Sci'ew

" " " " Set Screw " _ " Oil Pad (felt) " " Pinch Screw

Hook Snddd.e (left) complete , Nos .

200118D,200403С,204479,224005, 248404,248405,240430,248431,248433,

248463,265088,3503Э4Е,two each 248429,249565 ana four 240.4.'Oo

Hook Saddle (rlglit) compie bo , Kes .

2 0011 8D, 200403(i,2044 7 9,2 24 005, 248404,248405,248430,248431,248434, 248463,265088,3503 94E, two n.acl:

249393

202254

2003740

2003830

17809

264714 17809

202277

200072C 248442

248464

203172

200428C 2003350 248436 248437 2003470

202606

200090F

223690 223691

17809

17809 17809

17809

17809 17809 17809 17809 17809 17809

17809

17 809

16609 16609

Needle Bar Connocting Link Stud with

202254

Needle Bar Connecting Link Stud Oil

Packing (wick)

Needle Ba.r Connecting Link Stud Set

Screw'

Needle Bar Connecting Link Stud Set

Screw

Needle Bar Connecting Stud with

200072C and 202277

Needle Ba.r Connecting Stud Oil Packing

(wick)

Needle Bar Connocting Stud Pinch Screw'

" " Crank with 200335C,200374C,

200383C,200428C and 249393

Needle Bar Crank 248442 with 202400,

223881,238251,249398 and 264714

Needle Bar Crank Friction Washer

" " " Position Screw " " " Set Screw

" " Rock Fr.ams " " ■ " " Hinge Stud

„ ,1 II ' II II II ggy

Screw

Needle Bar Rock Fra.me Posit ion Brack-

e L

Needle; Bar Rock Frtuno Position Brack

et Screw

Heedlo Bar Rock Fr./urie Rock Shaft

" " " " " " 223690

248429,249365 and four 248455 with 200387C and 210920

Hook Saddle Screw (2)

" " " Washer (2)

223692

16609

Needle Bar Rock Frame Rock Shaft Crank

with 200029E

No.

223693

201407G

206758

201517E

200833C

201522E

202277

200029E

202668 210920

201141C

200367C

236649

223878

223863

223864 17810

201030F 200141F

208566

207072 2003520

202671 200653C 207963

200975F

206608

202337

202338

200086F 17809

Plnt.c 17806

17806

17006

17806

16609

16609 16609

16609

17810

17810 17810

17809 17809 17809

17809

17809 17809

PARTS FOR MACHINE NO, M2wHo

Noodle Bo.r Rook Fr'ijrip H lok

Cormoot.Jon with 20i,2'/7

Needle Bar Rook Fr.'oi j lliok

Cormoctioa Hitiro Borow'

Noodle Вя.г Rock F.ramo Rook

Cormsctlon Illngo Screw Packing (wick)

Nsedle Bar Rock Fr-crio .Reck Stioll, c'rotik

Connection Hlngf' Screw (J(.)Wi-r) Re!

Needle Bar Rock Fretno Pock She i t., ''peek

Connoctlon Hln.ge Screw' (upj)er)

Needle Bar Rock Frene Rock Sli.a.i't Crank

Connection Hinge Screw (upper) Nut

Needle Bar Rock Fi'ajiie R'c’k Stiaft Crank

Connection Oil Pecklri;.' (wick)

Needle Bar Rock Frame Rock She,I'L Crank

Pinch Screw

Needle Bar Rock Fr'imc Slide Block

" " " " " " 202668

with 201141C

Needle Bar Rock Frame Slide B.Lock

Screw Stud

Needle Bar Rock Frame Slide B.1 ock

Screw Stud Set Screw

Needle Holder, need] оз l/8 in.epe.rt, .and

must be sot dJ agonal 1 ,y, in gauges 1 /З 2,3 /6 4,1 /.1and 3 /З 2 I n,. , w ,11.11 201030F and two 200141F

Noodle Holder, in gaup.os from o/.e'e t.ci

15/32 In.,in steps of 1/32 in.,wil,h 201030F and two 20014 IF

Needle Holder,In l/2 to 3/4 In.,in

stops of 1/32 In.,wit.il '201022.)F 'Uid two 200141F

Needle Holder,in gauges from 25/32 to

1-1/2 In., in steps of 1/32 111., with 201030F and two 200141F

Needle Holder Screw

" Set Strew

Pressor Bar wit.li 2(HH''/4i’

Bracket

Presser Bar lifting Releasing Lever

Bracket Guide Screw

Presser Bar Lifting Releasing Level'

Bracket Spring

Presser Bar Position Guide

" " " " Lover with 200036F

Presser Bar position Guide Lever Pinch

Screw

Pi'-jii-'

2ÍI-1 rt

J OVJPT-)

Ok.p'O. Ci'P'iik

I'.iwpr) on

" Bushing (2) " " Set Screw (2) " LiItor " " Hinge Screw " Lifting Releasing Lever

'.ink

'inii

Plate

2003520 207965 210949 2000B6C 2005300 200948F 230795 224126 223798 224061 224079 224081 224083 223770 224067 224085 224087 224077 224132 224157

200074F 223309 224127

224158

223799

224062 16296

224080 16296

224082 16296

224084 16296

223771 16296

224133 16296

17809 16290 17 809

■1700;.' 16290 162 90 162 92 162 92 162 96 162 96 16296 16296 16296 16296 16297 16297 16297 1629'' 16296

16292

1 7809 162 99

16292

16296

PARTS FOR MACHINE NO. Il2wi40 13

Pressoi' Bar Position Guide Sot Screw

" " Spring (flat) " " " Bracket with 200006C " " " " Pinch Screw " " " Regulating Screw " " " Support Screw

" Foot Hinge Pin " " Plate,for 224127 " " " " 223799 ” " " " 224062 " " " " 224080 " " " " 224082

" " " " 224084

" " " " 223771

" " " 224068

и " и I, 224086

" " " " 224088

" " " " 224078

" " " " 224133

" " " " 224158

" " Screw

" " Shank