How it Works
SINGER
Loading...
112W138
User Manual
13 pgs1.02 Mb0
User Manual
19 pgs528.16 Kb0
Table of contents
Loading...

SINGER 112W138 User Manual

SINGER
112W138
Form 2682w
( 141 )
Printed in U. S. A.
LIST
INDEX
1’n.ffe
Accessories ......................................................................................................... 1!^
Bobbin Winder ...................................................................................................... lb
OF
PARTS
foot Lifter ............................................................................................................. 17
Crlnder ........................................................................................................ IB
Knee LI f tor ......................................................................................................... Ill
Machine No.llSwlbO .............................................................................................. 5
Miscellaneous Parts .............................................................................................. IB
Numerical List of P<arts .................................................................................... 19
Thread Unwinder .................................................................................................. 17

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR ORDERING
In ordering Trom this list, use ONLY the PART number In
the FIRST column.
The number stamped on a Sewing Machine Pari Is the num ber of the Single Part only, except when the part Includes Set Screws, Clamping Screws, Studs and Rollers Spun on. Small Wires riveted, or Parts soldered together, etc.,which It Is necessary to furnish In combination.
Every combination of parts sent out has Its specific number which, although not stamped on Parts (except In above case), must be used when ordering the combination.
Each number always Indicates the SAME PART In whatever list It appears, or for whatever Machine.
The letters after some of the numbers Indicate the style of finish only, as follows:
A. Hardened, Polished, Nickel Plated and Buffed. B. Polished, Nickel Plated and Buffed. C. Hardened only. D. Polished only. E. .Soft, not polished.
F. Hardened and Polished. H. Blued. J. Nickel Plated only.
R. Merllzed. X. Black Oxide.
XC. Hardened and Black Oxide.
Y. Blade Nickel only.
These letters MUST BE USED when they appear In the list
and AFTER the number, as In the list.
In this series: 200001 to 201500 and 350001 to 351500 are Screw Numbers. 201501 to 201800 and 351501 to 351800 are Nut Numbers. 201801 to 202000 and 351801 to 352000 are Roller Numbers. 202001 to 350000 are Numbers of Machine Parts.
The figures In the second column refer only to the
plate In which the Illustration of the part Is shown and
are NOT TO BE USED In ordering.
Two or more numbers over a cut Indicate that the dif
ference between such parts Is not visible In an Illustra
tion.
Parts marked with an asterisk (•) are furnished when
repairs are made at the factory.

LIST OF PARTS COMPLETE

FOR
MACHINE No. Il2wl38

HIGH SPEED. DROP FEED.

VERTICAL TRIMMER. BINDER.

HOOK AT LEFT OF THE NEEDLE.

MADE IN >/g INCH GAUGE THE TRIMMING MARGIN IS
CONTROLLED BY THE WIDTH OF THE BINDING,
No.
«248176
2,24002, 20017011 1G270 20224B
2042.35 200004E 202005 22,4137 240602, 2022,44
2003.38C 207080
202244
Píate
16270
16270 16260 16260 16260 162,70 162,70 16270
16270 16270 16270
Na.me
Arm with 202135 and 2011C01:
M
Cap
II
" Screw
II
" " Washer
II
Position Pin (2)
If
Screw (3)
It
Washer (3)
II
Shaft with 200357F, and 224392
II
Bushing (back) with 202244
II
" " " Oil Packing
II
" " (front) with 202244
If
" " " on Packing
" Set Screw
PARTS FOR MACFIINE No. Il2wl38
No.
200502B 16270
Plate
Arm Shaft Bushing (front) Oil Packing
Name
Thumb Screw 2003410 224103 16260 224200 16260
16270
Arm Shaft Bushing (front) Set Screw
'' " Connection Belt
" " " " Pulley with
200327C,200602E and two 202253
200602E 16260
Arm Shaft Connection Belt Pulley Posi
tion Screw
200327C 16260
Arm Shaft Connection Belt Pulley Set
Screw
202253
16260
Arm Shaft Connection Belt Rilley Spring
Flange
224138
16271
Arm Shaft Connection Belt Timing Collar
with 200113F
200113F 16271
Arm Shaft Connection Belt Timing Collar
Set Screw 224139 16271 Arm Shaft Connection Belt Timing I’late 200164B
16271
Screw (2)
224392 16270 Arm Shaft Oil Packing (v/lck) 200357E 248177 248178 200585H 200393C 248179
16270 16279 16279 " " " fbctenslon 16279 16279
16279 Attachment Slide Plate and Extension
" " " " Stop Screw
Attachment Slide Plate with 200.393C
" " " " ocrew
" " " Lock Screw
complete,Nos.248177,248178 and two
200585H
235096
16270
Balance Wheel (disc) (belt groove 2-1/2
In.dlam.) with 200328C and 20CF35C
200328C
16270
2003350 16270
*248180
202258 200570E
16260 16260
Balance Wheel Position Screw
" " Set Screw
Bed with 203376
" Hinge Connection (2) " " '' Screw (4)
54897 16271 " Oil Cup 248181 200462B 264642 200056E 248102 248183 200585H 248184
259478
16279 " Slide (back) with 200804E 16279 16279 16279 16279 16279 16279 16279
" " " Locking Thumb Screw
........................
...................................
Stop with 200462B
Screw (2) " " (front) " " Extension " " " Screw
Bed Slide (front) and Pictenslon complete.
Nos.248102,248183 and four 200585H
16279
Binder and Folder,for 3/4,13/16 or 7/8 In
binding,state size required
No. 200П04Е 203560B
259250
Ра3470 *23vV;'64 «240185
20,3(i48
»202,056
2034 73 20,3474
241674 24K;75 3S040,5C 224004
224005
20134 9C
201542C
21X3101
16272
—
16272
16272 16272 16272 16272 16274
16274
16274
16274
16274
16274
202277
200.364C
16274
16274
16274 2001IBD 203214
235123
200904C 200594C 203,216 233765
2481П6
210911
16274 16272
16273 16272 16272 16272
16272
16273
16279 202135 16279 2001738
16279
224050 16261
PARTS FOR MACFIINE No. Il2wl38
Plate 16279
16279 16279 16272
Binder and Folder Screw Stud
Bobbin (2)
Name
" Iliumb Nut
" " " Washer
Case
Latch
" Pin " Plunger
Spring
Oiling Felt
" " " Screw
Opener
" Lever with 201349C,
201S42C and 203101
Bobbin Case Opener l^ever Driving Screw
Stud
Bobbin Case Opener Lever Driving Screw
Stud Nut
Bobbin Case Opener Lever Driving Screw
Stud Oil Packing (wick)
Bobbin Case Opener Lever Hinge Stud with
202277
Bobbin Case Opener Lever Hinge Stud Oil
Packing (wick)
Bobbin Case Opener Lever Hinge Stud Set
Screw
Bobbin Case Opener Ijever Link
" Screw
" Tension Spring
" ” " Regulating Screw " " " Screw
Washer (cloth)
Bobbin Case (left) complete,Nos.200594C,
2009840,202056,203214,203216,2а34 73, 203474,203648,233764,241674,241675 and two 350405C
Bobbin Case (right) complete,Nos.200594C,
200984C, 202056,203216,20?4 73,203474, 203648,235123,, 241674,241675,248185 and two 350405C
Face Plate
" " Position Pin " " Thumb Screw
Feed Bar with 200336E and 201535E
" Retainer
No.
224051
35039:50 201518E
Píate 16261
16261 Feed Bar 224050 with 2000400,224052 and
16261
162G1 Feed Bar Hinge Screw (driving)
16261 248187 16281 200106E
16281 200336E 16261 201535E 16261
224106 16260
201407C 201Б17Е
16260 16260
206758 16260
202277
16260
200049D 16260 202300 16260 224140 16260
201408C
16260
201525E 16260
202301
202595
16260
1626 0
200607C 16260
201400C
16260
201525E 16260
200429C 200383C
22oG50 2?;3651
2,24141 20001 OF, 202625
2003.83C
16260 15260
16261 16261
16261 162C1 162G1
1G2G1
PARTS FOR MACHINE No. 112^133
Name
225B37
" " " Ixint
" Screw (2) " Support Screw " " " Nut
Driving Connection with 2000491) and
202277 ;ed Driving Connection Hinge Screw " ” " " " Ntil:
' " •' " " Ojl
Packing (wick) ;ed Driving Connection Oil Packing;
(wick) ¡ed Driving Connection Pinch Screw ' " Eccentric Regulating Bracket
I It II II II
202300 wl th 224200, tv;o each 2014000’ and 201525E
ed Driving Eccentric Regulating Bracket
Hinge Screw
■ed Driving Eccentric Regulating Bracket
Hinge Screw Nut
ed Driving Eccentric Regulating Bracket
Plunger
ed Driving Eccentric Regulating Bracket
Plunger Spring
ed Driving Eccentric Regulating Bracket
Plunger Spring Stop Screw
ed Driving Eccentric Regulating Bracket
Stop Screw
ed Driving Eccentric Regulating Bracket
Stop Screw Nut
ed Driving Eccentric Regulating Screw
II It II "
Check Screw
223650 with 201518E
224051 and ЗВсЗГС-к)
" ” " Pinch Screw
Stop Collar with
two 200383C (2)
ed Driving Rock Shaft Stop Collar Set
Screw
No.
^P41S4
224052
200(40(3 10261
225В;37
22,3655 2001730 16261 201220C 16271
224142
#202,311
202443
8 ' .X 511
: i.X’512
16273
247520 248189 248190
240191
.''•-■.ас 7
201222C 2003G2C 224024
зоаж'о
2.24022 224110 224111
202244
200S27C 224112
16272
162,72
16272,
162ГЗ
16271
16271 16271
1б2'74
162.74
162-74 16271 16271
16271
16271
16271
2012S4C 16271
20225;3 16271
224100 2Ю51". B0125.3E 22-3849 22402:3
16272. 162'73
16272 16274 16274
parts for machine No. II2wI38
Plate 162,71 162,61
15261 16261
16270
Feed Lifting Cara with 201220C
" " " Fork with 200173D and
22,3655
Feed Lifting Cam Fork Screw
" “ " Oiling Felt
Name
Regulating Spindle with 202311,202443
and 202619
16270 16270
—
Feed Regulating Spindle Head
" " " " Pin
Hook (sewing)
" 203511 with 203513 and two 201253F " 2a3512 with 200555H,2№)254 and 248199
203511 with 224100 and two 20125.3F
" 247520 with 200555H,203>254 and 248198
Hook and Dobbin Case (left) corriplete,Nos.
2337G5 and 248109
Hook and Bobbin Case (right) complete.
Nos.248186 and 248188
Hook Driving Gear (spiral) with 200362C
and 201222C (2)
Hook Driving Gear Position Screw
" " " Set Screw " " Pinion (spiral) with two
200382C
Hook Driving Pinion Set Screw
" " " 'ITirust Washer
“ " Shaft " " " Bushing with 202244
" " " " Oil Packing
(wick)
Hook Driving Shaft Bushing Set Scro^^(
" “ " Connection Belt Pulley
with 202.253 and two 201254C
Hook Driving Shaft Connection Belt Pulley
Set Screw
Hook Driving Shaft Connection Belt Pulley
Spring Flange
Hook nib (left)
“ ’’ (right)
" '' Sijrew
" Saddle (left) with 200009E " " 12,384.9 with 2003,640,2004460,
224019 ind 224020
Washer
" " Screw
Set Screw
" " Position Pin
10
PARTS FOR MACHINE No. Il2wl38
Ho. Plate Name 248192 16275 Hook Saddle (right) \jlth 20000»: 248193 16275 " " 248192 with 2003640,2004460,
224019 and 22,4020
22.3680 16271 Hook Saddle Beai'lng (left) 200327C 16271 " " " " Set Screw 223681 16271 " " " (right)
20O335C 16271 " " " " Set Screw 248226 16271 " " Gear Guard 200976D 16271 " " " " Screw (2) 200009E 16274 " " Pinch Screw 200006E 16274 " " Screw (2) 225505 16274 " " " Washer (left) 226398 16275 " " " " (right) 248196 16274 Hook Saddle (left) oomplete,Nor..200118U,
20a'564C, 223623,224004,224005,224021 to 224023,248190 and 26.5088
248197 16275 Hook Saddle (right) complete,Nos,224021,
224022,248191 and 248193 248198 240199 224019 200364C 224020 200446C 200555H 203254 240067 200262H 223684
16272 Hook Socket (left) 16273 " " (right) 16274 " “ Bushing (lower) (bronr.e) 16274 " “ " " Set Screw 16274 " " '' (upper) (bronte) 16274 " " '' " Position Screw 16272 " '' Screw 16272 " Washer 16279 Knee Lifter Connection l4?ver 16279 " " " " Hinge Screw 16279 " " " " Lifting Rod
with 202302
202302
16279
Knee Lifter Connection Lever Lifting Hod
Cotter Pin
206628
16279
Knee Lifter Connection Lever Lifting Rod
Spring
227227
16279
Knee Lifter Connection Uiver Lifting Rod
Spring Collar with 200H3F
200113F
16279
Knee Lifter Connection Lever Lifting Rod
Spring Collar Set Screw
240068 200262H 248200 248232
248202
24823,3 207011
16279 16279 16276 16276
16276
16276 16276
Knee Lifter Lifting lever
» " " " Hinge Screw
Knife
'' Arm with 201160E,201531E, 3500370,
350266C,two each 200076D and 202603,
Knife Arm Base Plate with two each
200410C and 201617C
Knife Arm Base Plate 248202 with 240262
" " " " Position Plate 264718 16277 " " " ” Oil Guard
No. 200574 E 2005401::
202622 2004 irx: 2016176 20444:^
201160E
35026GC
2015318
248234
2482.35 200157B
20009GD 240204 248205
224G24
248206
200577X6
200582H 240391 200942F 350o:;7C
248207 247764 248200
248209
210903
200075E
2.13940
2.47768 247787 2477G9
2000761) 2026a4
16276
16276 16276 16276 16276
16276
16276
16276 16276 16276 16276
16276 16,276 16276 16276 16276
1G27G
16276
16276
16276 16276 16,276 16276 16276
24B210 16276 200233C
16276
237181 16277
202552
201183D
16277 Needle Bar Connecting Link
16277
240327 16277
PARTS FOR MACHINE No. Il2wl38
Plate 16276
16276 1G276 16276 1627G
16276 16276 16276 16276 16276
Knife Arm Base Plate Position Plate Screw
" "
" " "
II
”
"
Kjilfe
Name
Screw Center
'' " " Nut
Spring
" Screw Eye '' Stop Screw " " " Nut
Support
" " Bracket
" " Screw (2)
Di’lvlng Bar
Driving Bar complete,Nos.200942E,
210983,240.391,2482.04,248207, 248209, two each 200075E and 21,394 0
Knife
Driving R;ir Slide Block
"
two each 2.0O397H and 270080
Knl f 0
Drlvlnip Bar Clide Blocli PI,ate Screv;
II II
LI nk
"
" Slide
11 ,1 „ „
248208 with 247764,247768,247769 and 24 7787
Knife Driving Slide Locking Plunger
Bracket Bln
Knife Di'ivln.g Slide Locking Plunger
Bracket Screw
Knife Di'Ivlng iSlIde Locking Plunger
Bracket Screv; Washer
11 „
Knife Driving Slide Locking Plunger Head
'' Screw '' " Washer
Tlii'ovj-out Lever
" '' " Hinge Screw
Needle Bar and Holder In 1/8 In.gauge with
two 200141F
" " " " " " Screw " " " " Stud with 202254
ocrevj
Hinge Screw
Screw Stud
" Locking riun.ger
" Washer
" II ra / \
ocrew (2)
II
Plate with
" " " " " "
" " " Bracket
Spring
Loading...
+ 13 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use