SINGER 111W150 User Manual

SINGER

111W150

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the PART number In

the FIRST column.

The number stamped on a Sewing Machine Part Is the num

ber of the single Part only, except when the part Includes Set Screws, Clamping Screws, Studs and Rollers Spun on. Small Wires riveted, or Parts soldered together, etc.,which

It Is necessary to furnish In combination.

Every combination of parts sent out has its specific number which, although not stamped on Parts (except In above case), must be used when ordering the combination.

Each number always Indicates the 3A№ PART In whatever

list It appears, or for whatever Machine.

The letters after some of the numbers Indicate the

style of finish only, as follows:

A. Hardened, Polished, Nickel Plated and Buffed. B. Polished, Nickel Plated and Buffed. C. Hardened only. D. Polished only. E. Soft, not polished. F. Hardened and Polished. H. Blued. J. Nickel Plated only. R. Merllzed.

X. Black Oxide.

XC. Hardened and Black Oxide.

Y. Blade Nickel only.

LIST OF PARTS COMPLETE

FOR

MACHINE No. Illwl50

HIGH SPEED. BALL BEARING.

COMPOUND FEED. KNEE LIFTER.

POSITIVE STITCH REGULATION.

For Clothing, Cloaks, Suits, Overalls, Duck Coats,

Oil Clothing, Shirts, etc.

These letters MUST BE USED when they appear In the list

and AFTER the number, as In the list.

In this series; EOOOOl to 201500 and 350001 to 351500 are Screw Numbers.

201501 to 201800 and 351501 to 351800 are Nut Numbers. 201801 to 202000 and 351801 to 352000 arc Roller Numbers. 202001 to 350000 are Numbers of Machine Parts.

The figures In the second column refer only to the

plate in Which the Illustration of the part Is shown and

are NOT TO BE USED In ordering.

Two or more numbers over a cut Indicate that the dif ference between such parts is not visible In an Illustra tion.

Parts marked with an asterisk (•) are furnished when

repairs are made at the factory.

No.

Plate

»248401

224002 20027811 202248 204235

200004E 202005 248440 249440

*240054

24CX355

16G03 1660,3 16603 16613 16613 16613 16603 16603 16606

16603

2OO070C 16600

*240056

16603

*240053 16603

Arm

with 202135

Cap

" Screw " " Washer

Position Pin (2)

Screw (3)

" Washer (3)

Shaft with 224392 and 350431E

" Ball Bearing

" " " Collar with two

200378C

Arm Shaft Ball Bearing Collar 240054 with

249440

Arm Shaft Ball Bearing Collar Set Screw

" " " Retaining Washer

" Bushing (back)

Name

PARTS FOR MACHINE No, lllwl50

PARTS FOR MACHINE No. 111*150

No. Plate 20O335C 16603 240057 16603

207080 16603 202244 16603 200502B 16603

200341C 16603

224103 16604 224104 16604

200602E 16604

200327C 16604

202253 16604

224139 16607 200164B 16607

224392 16603 350431E 16603 240402 16603

350419H 200328C 200335C

16600 16600 16600

*240249

255160 240000

223811

223812

240004 203470

16607 16613 16613 16613 16613

16605

*236691

203648

16605

•202056

203473

203474 241674 241675 350405C 248404 224005

16605 16605 16605 16605 16605

16606 16606

201349C 16606

201542C 16606

Arm Shaft Bushing (back) Set Screw

Name

Arm Shaft Bushing (back) (ball bearing)

complete,Nos.240053,240055 and 240056

Arm Shaft Bushing (front) with 202244

“ “ " " Oil Packing (wick) " " " " " " Thumb

Screw

Arm Shaft Bushing (front) Set Screw

“ " Connection Belt " " " " Pulley with

200327C,200602E and two 202253

Arm Shaft Connection Belt Pulley Position

Screw

Arm Shaft Connection Belt Pulley Set

Screw

Arm Shaft Connection Belt Pulley Spring

Flange

Arm Shaft Connection Belt Timing Plate

n II II •• <1 "

Screw (2)

Arm Shaft Oil Packing (wick)

'' " " " Stop Screw

Balance Vfheel (disc) (belt groove 2-1/8

In.dlam.) with 200328C and 2OO035C

Balance Wheel Adjusting Screw

" '' Position Screw

” “ Set Screw

Bed

" Oil Cup (4) " Slide (back) " " " Stop " " " " Spring " " (front)

Bobbin

” Case " " Latch

" " " Pin " " " Plunger " " " Spring

" “ Oiling Felt " " " " Retainer " “ " " " Screw

" " Opener " " " Lever with 201349C,201542C

and 203101

Bobbin Case Opener Lever Driving Screw

Stud

Bobbin Case Opener Lever Driving Screw

Stud Nut

No. Plate Name

203101 16606 Bobbin Case Opener Lever Driving Screw

Stud Oil Packing (wick)

265000 16606 Bobbin Case Opener Lever Hinge Stud with

202277

202277 16606 Bobbin Case Opener Lever Hinge Stud Oil

Packing (wick)

201246C 16606 Bobbin Case Opener Lever Hinge Stud Set

Screw 248405 200118D 236083 201016F 2005 94C 203216 236692

16606 16606 16605 16605 16605 16605 16605

Bobbin Case Opener Lever Link

" " " Screw '' " Tension SprlTig

X It II II n

" Regulating Screw

Screw

" Washer (cloth)

Bobbin Case complete,Nos.200594C,201016F,

202056,203216,203473,203474,203648, 236083,236691,241674,241675 and two

350405C 210911 202135 200473B 24022;?

240224

16613

16613 16613 16600 16608

Face Plate

" " Position Pin

" Thumb Screw

Feed Bar

" " 240223 with 224052.225037 and

350197E 350393C 201518E 240077

16608 16608 16600

Feed Bar Hinge Screw (driving)

» M If „ , ,

Nut

" Dog,46 needle hole,for needle sizes

16 and 10

200106E 240225

16600

16607

Feed Dog Screw (2)

" Driving Connection with 240226 and

240227

201181C 201518E 240226

240227

16607 16607 16607 16607

Feed Driving Connection Hinge Screw

" " " " " Nut " " " Oiling Felt " " " " " Retaining

Wire

240228

200019E 240229

240230

240415 248416

16606

16608 16607

16607 16607 16607

Feed Driving Crank with 200019E

'' '' " Pinch Screw

'' Eccentric

" " " Adjusting Disc

" " " " " Spring

" " " " " " Collar

with two 200382C

200382C 16607 Feed Driving Eccentric Adjusting Disc

Spring Collar Set Screw

240231

200369C

16607 Feed Driving Eccentric Friction Olb 16607 " " " " " Ad

justing Screw

350101C 16607 Feed Driving Eccentric Friction Olb Ad

justing Screw Set Screw

PARTS FOR MACHINE No. lllwlSO

No.

г40232

Plate 16607

Feed Driving Flange with 2003.'53C,200346C

Name

two each 200369C and 350101C 2OO033C 200S46C 16607 223650 16606 240233

16607

Feed Driving Flange Position Screw

" ” " Set Screw " " Rock Shaft

16600 " " " " 223650 wlth 201518E,

240224 and 350393C

223652

16608

Feed Driving Rock Shaft Crank with

200019E 200019E 202625 16608

16608 Feed Driving Rock Shaft Crank Pinch Screw

....................................... Stop Collar with

two 200383C (2)

200363C 16606 Feed Driving Rock Shaft Stop Collar Set

Screw

240449

16604 Feed Indicating Disc with 200958C 200958C 16604 " " " Set Screw 224154 16607

224052

16606

" Uftlng Cam with 201220C " " " Fork with 200173D and

223655 350197E 225837 223655

16606 16608 " Washer

16608 " " " Oiling Felt 200173D 16608 201220C 240235 240245 248425

•248444 248445

16607 " " " Set Screw 16607 " Regulating Stud 16607 " " " Retaining Spring 16607 " " " Spring 16605 Hook (sewing) 16605

Feed Lifting Cam Fork Screw

" " " " " Screw

'' 246444 vTTCTl 203525,224025, two each

20059011 and 201253F

240446 16605

Hook and Bobbin Case complete,Nos.236692

and 248445

249665 350394E

200403C 204479 16606

16606 Hook Ball Bearing

16606 16606

'' ” " Adjusting Screw " " ” " " Set Screw

H t1 M tl II II II

Packing (brass)

248430 240429 223067

16606 16606 16607

Hook Ball Bearing Washer (felt)

" " " " (steel) " Driving Gear (spiral) with 200B62C

and 201222C

201222C 200362C 248431

16607 Hook Driving Gear Position Screw 16607

16606

" " " Set Screw " " Pinion (spiral) with two

200382C 2OO602C 240250 249440 16607

16606 Hook Driving Pinion Set Screw 16607

" " Shaft " " " Ball Bearing

No.

•240060

Plate 16607

Hook Driving Shaft Ball Bearing Collar

Name

with 200378C and 201220C

240061

16607

Hook Driving Shaft Ball Bearing Collar

240060 with 2.49440

201220C

16607

Hook Driving Shaft Ball Bearing Collar

Position Screw

2OO078C

16607 Hook Driving Shaft Ball Bearing Collar

Set Screw

•240056

16607 Hook Di'lvlng Shaft Ball Bearing Retaining

Washer

•240058 240063

16607 Hook Driving Shaft Bushing (back) 16607

Hook Driving Shaft Bushing (back) (ball

bearing) complete,Nos.240056,240058 and 240061

237529

200327C

16607 Hook Driving Shaft Bushing (front) 16607 " " “ " Set Screw (2)

224112 16607 " " " Connection Belt Pulley

with 202253 and two 201254C

201254C

16607 Hook Driving Shaft Connection Belt Pulley

Set Screw

202253

16607 Hook Driving Shaft Connection Belt Pulley

Spring Flange 203525 201253F 240434 240243 200335C 248435 200009E 200006E 2255B5 248439

16605 Hook Gib 16605 16606 16607

" Screw

" Saddle with 200009E and 201246C

" Bear 1ng 16607 '' " Set Screw 16606 16606 16606 16606 16606

" " on Pad (felt)

" Pinch Screw

" " Screw " " " Washer

Hook Saddle complete,Nos.200118D,20040SC,

204479,224005,248404,248405,248430,

248431,248434,246446,265000,350094E,

two each 248429,249365 and four 248435 224025 200590H 240067 2002,62H 223604

16605 16605

16613 16613 16613

Hook Washer

" " Screw

Knee Lifter Connection Lever

" " " " Hinge Screw " " " " Uftlng Rod

with 202302 202302

16613

Knee Ufter Connection Lever Uftlng Rod

Cotter Pin

206628 16613 Knee Ufter Connection Lever Lifting Rod

Spring

227227 16613 Knee Ufter Connection I.ever Uftlng Rod

Spring Collar with 200113F

200113F

16613 Knee Ufter Connection Lover Uftlng Rod

Spring Collar Set Screw

240060 16613 Knee Ufter Lifting Lever

PARTS FOR MACHINE No. lllwlSO

No.

200262H 240020

202552 264718

Plate Name 16613 16610 Needle- Bar with 2(X)125F,200175D and

16610

16610 200161D 16610 202333

202254

200374C

16610

16610 2OO603C 16610 223688

202330

16610

200072C 16610 202692

240021

203172 2OO420C

16610

16610 200335C 16610

248436 248437

16610

16610 200(5470 16610 202666 200098F

16610

223690 16609 223691

223692

223690

201407C

16609

16604

206750 16604

201517E 16604

200833C

16604 Needle Bar Rock Frame Rock Shaft Crank

201522E 16604

202277

16604 Needle Bar Rock Frame Rock Shaft Crank

Knee Lifter Lifting Lever Hinge Screw

240039

Needle Bar Connecting Link

" " " "oil Ouard " " " " " " Screw " " " " Stud with

202254

Needle Bar Connecting Link Stud Oil Pack

ing (wick)

Needle Bar Connecting Link Stud Set Screw

H N n *1 tl II II " " " Stud with 200072C and

202330

Needle Bar Connecting Stud Oil Packing

(wick)

Needle Bar Connecting Stud Pinch Screw

" " Crank with 2OO335C,2OO074C,

2OO303C,2OO420C and 202333

Needle Bar (h-ank 202692 with 202399,

202400,202552,223600 and 24СЮ22

Needle Bar Crank Friction Washer

" " " Position Screw " " " Set Screw " " Rock Frame

................................

It H II II II II n t n

II II II II II It

Hinge Stud

Set Screw

" " " Position Bracket

" " " " Rock Shaft " " " " " " 223690 with

2D0387C and 210920

Needle Bar Rock Frame Rock Shaft Crank

with 200029E

Needle Bar Rock Frame Rock Shaft Crank

Connection with 202277

Needle Bar Rock Frame Rock Shaft Crank

Connection Hinge Screw (lower)

Needle Bar Rock Frame Rock Shaft Crank

Connection Hinge Screw (lower) Oil Packing (wick)

Needle Bar Rock Frame Rock Shaft Crank

Connection Hinge Screw (lower) Itat

Connection Hinge Screw (upper)

Needle Bar Rock Frame Rock Shaft Crank

Connection Hinge Screw (upper) Nut

Oil Packing (wick)

Screw

Ho.

200029E

202668 210920

201141C

2OO007C

240039

200175D

200125F

208566

207072 16611

200852C

202671

200653C

207963

200975F

206608

202337 202330

200086F

200352C

207965 210949

2OOO06C

200538C

2OO940F

202090 203013

20(Ю74Р

215911

229882

240022 16610 202399 202277

202400 202423

2OO063C

202401

200132E

240023

Plate 16609

Needle Bar Rock Frame Rock Shaft Crank

Name

Pinch Screw

16609

Needle Bar Rock Frame Slide Block

„ II II 11 II n 202668

with 201141C 16609 16609

Needle Bar Rock Frame Slide Block Stud

It II II 11 It ‘1 » Set

Screw 16610 Needle Bar Thread Guide 16610 16610 16611

......................... " Screw

" Set Screw

Presser Bar with 20СЮ74Р

" " Bushing (2)

16611

" " " Set Screw (2) 16611 " " Lifter 16611

16611

" " ” Hinge Screw

" ” Lifting Releasing Lever

Bracket

16611

Presser Bar Lifting Releasing Lever

Bracket Guide Screw

16611

Presser Bar Lifting Releasing Lever

Bracket Spring

16611 Presser Bar Position Guide 16611

" " " " Lever with

200086F

16611

Presser Bar Position Guide Lever Pinch

Screw

16611

16613

16611

16611 16613 16613 16611 16611

16611 16611

16611

Presser Bar Position Guide Set Screw

" " Spring (flat)

” ” ” Bracket with 200086C

" " " " Pinch Screw " ” " Regulating Screw " “ ” Support Screw " Foot Hinge Pin " " Plate " " Screw

" " Shank

Presser Foot (hinged) complete,Nos.202090

203013 and 215911

Take-up Lever 16610 16610

" " Driving Stud with 202277 " " " "Oil Packing

(wick) 16610 16610

Take-up Lever Hinge Stud with 202423

" I, » 1. Packing

(wick) 16610 16611

16611 16612

Take-up Lever Hinge Stud Set Screw

" " Oiling Felt

" 1. « 1.

Tension Bracket with 201224B and 236060

12 PARTS FOR MACHINE No. lllwlSO

No. Plate Name

200159F 16612 Tension Bracket Screw

240446 16612 Tension Bracket complete,Nos.200978H,

201199F,204271,223438,223703,223704, 223706,237174,240023,two each 200S09E,

244048 16612 Tension Disc 236060 16612 " ” Position Pin 223708 16612 " Release Uver 235072 16611 “ " ” Rod 200309E 16612 " " " Screw 223704 16612 " " Plunger

204271 16612 " " Washer 223438 16612 " Spring 201224B 16612 " Stud

201572B 16612 " Thumb Nut

223706 16612 Thread Controller Disc

200978H 16612 " " ’’ Screw

237174 16612 " " Spring

242117 16612 " " " Stop

200132E 16612 " 201199F 16612 ' " Stud with 204925 200061C 16612 " " " Set Screw 201572B 16612 " " " Thumb Nut 204925 16612 " " " Washer 202412 16603 " Guide

224040 16612 "

210954 16612 " " (lower)

210955 16612 " ” (upper) 200582H 16612 " " Screw (4) 240034 16612 " Retainer 2OO055H 16612 " " Set Screw 240027 16613 Throat Plate

691F 16613 ' " Screw (2)

201572B and 244048

....................

Screw

No. 200157B 20086ID 203470

•226482

•225483 226497

231337 20066ID

135 X 7 224121 16258

12361

41400 120342 120343

•225484

•225485 225498

225554

259428

2.59429 200113F

225453 225454 202277 225438 225455

225456 225368 200880C 225381 225444 200056E 225458 225459

Plate 16613 16613 16605

17620

16613

16613 16610

16613 17620 17620 17620

17620

ACCESSORIES

Attachment Screw

Bed Slide (back) Locking Thumb Screw Bobbin (5)

" Case Screw Driver Blade " " " " Handle

Bobbin Case Screw Driver complete,Nos.

225482 and 225483

Cloth Guide

" " Thumb Screw Needles,six,size 18 Drip Pan,20 In.long,with four 1 In.wlre

nails

Machine Hinge Connection (2)

" Rest Pin (wood)

Oiler (copper plated) with 120343

" Spout,3-1/2 In.long

Screw Driver Blade

" ." Handle

Screw Driver complete (7-1/4 In.long),Nos,

225484 and 225485

Wrench (steel)

(SWINGING AUTOMATIC, RIGHT HAND)

16615 16615 16615

16615 16615 16615 16615 16615 16615 16615 16615 16615 16615 16615 16615 16615

Brake (leather)

" Clamp ” ” Screw

Frame with 202277 and 225438

" Hinge Pin " Oil Packing (wick) " " Well Cap “ Spring " " Plunger

Pulley with 200380C

" Set Screw

Spindle

Stop Latch

" " Screw

" " Thumb Lever

" " " " Hinge Stud

Nsime

BOBBIN WINDER

14 ACCESSORIES

No. Plate Name 225459 16615 Stop Latch llnunb Lever Joint Stud 202478 16615 " " Trip Lever

200299H 16615 " t. n II jjjpgg scj-ey 225461 16615 Tension Bracket with 201499B

200082D 16615 " " Screw 228026 16615 " " " Washer

2102 16615 “ Disc

13710 16615 " Spring 201499B 16615 " Stud 201572B 16615 " " Thumb Nut 225462 16615 Bobbin Winder Tension Bracket complete.

Nos.13710,2015728,225461 and two 2102 259430 16615 259431 16615

Bobbin Winder and Tension Bracket Base Universal Bobbin Winder complete,Nos.

200056E,200082D,200113F,200299H,202478

225368,225381,225444,225453 to 225456,

225458,225462,228026,259428 to 259430

two each 225459 and wood screws 3/4 in,

No.l2,R,H.B.

No.

240079

240076

240077

240070

240026

240027

Plate 16614

16614

16614 16614

FEED Does

Name

Feed Dog,40 needle hole,for

20,for 240026

Feed Dog,50 needle hole,for

14 and 15,for 240027

Feed Dog,46 needle hole,for

16 and 18,for 240027

Feed Dog,40 needle hole,for

20,for 240027

THROAT PLATES

Throat Plate,for 240079

'' " " 240076 to

needle

240078

size

sizes

size

228294 228295

228299

228296

228297

228284 202455

356C

16258 16258

16258

16258 16258 16258 16258 16258

16258

356C 16258

227728

16258

*227729

200529C 16258

228298

16258

(Other

KNEE LIFTER

Rock Lever with two 356C

" " Bracket with 356C and four wood

screws 7/0 in.,No.12

Rock Lever Bracket 228295 with 228294 and

228297

Rock Lever Extension with 200529C

" " " Set Screw " " Hinge Pin

M M » II n 4. o

" " Knee Plate with 3560

R II tl Hi

n H N n Mri..n

Set Screw

Arm

Set Screw " " " " Set Screw " " Rod with 227729 " " " Cap

" » n Screw

Knee Lifter complete,Nos.202455,227728,

228284,228296 and 228299 Knee Lifter Parts are listed with parts of machine head.)

PARTS REQUIRED FOR CHANGINe FROM

223733 16613

200082D 16613 227561 16613 200635D 16613

227952 227678 227954 202784 225016 227953

17620 17620 17620 17620 17620 17620

227955 17620

FOOT LIFTER

KNEE LIFTER TO FOOT LIFTER

Lifting Lever EJctenslon

" " " Screw (2) " " Spring " " " Stop Screw

FOOT LIFTER

Lever (left or right) with 227954

" Chain,48 In.long,wlth 202784

" " Hook (lower)

" " " (upper)

" Hinge Pin

" Stand with two wood screws 1 In.,No.

Foot Ufter Lever (left or rlglit) com

plete,Nos.225016,227678,227952 and

227953

THREAD UNWINDER

Ilo. Plate

225?,57

ir,02,a7 225?0n 17900

?,oaiB,ic

Koioiac 17900

202490 17900

22,r>.291

2()169(;j 22,S?26 22K^24

oorv''''')

( t' vX 225268

60912 60914

2255277 17900

2-;729 17900

2252,90 17900

17900

17900 Thread Oulde

17900 17900 17900 " " Rod with 208K and 2252.22.

208f:

179(X)

17900 17900

1 lame

Spool Rent (for t.wo spooln) (flat) with

20101RC

Spool Rent Oiiahlon (felt)

" " Rod

........................ Sot Screw

'' “ Set Screv; " Stand wltli Ooa'USC

" " Uirk Out

" " Ron It, Ion Cup

" '' " Screw " " '' Washer

lliread Unwinder (for ta;o spools) (flat)

complete, ilos. 2:01696,1, SUSiqo^ 225257,

22,!>224,2252.2,6,22,5288, two each 1.5020.''.

22.5t9l and t.liree wood .screws 7/8 In. lJo.12

MISCELLANEOUS PARTS

Spool Welrjlit with 60914

" " Center Pin " Wire (for sm.aH .spools)

llu'ead Cone (wood )

" " Holder

+ 16 hidden pages