SINGER 110W121 User Manual
SINGER
110W121
Instructions for Ordering
LIST OF PARTS COMPLETE
In ordering from this list, use ONLY the PART miijiher in
the FIRST eohimn.
The number stumped on n Sewing Mn('hine J’nrt is the number
of the Single Part only, cxeept when th i I'nrt inrhides Set Screws.
Clamping Screws, Studs and Hollers Spun on, Small Wires
riveted, or Parts soldered together, etc., which it is necessary
to furnish in combination.
Every combination of partf sent out has its specilic number
which, although not stam])cd on Parts (excc|)t in abov(i cases)
must he used when ordering the combination.
Eacli uuinber always indicates the SAME PART in whatever
list it appears, or for u liatever Machine.
Tlie letters after some of the numbers indicate the style of
finish oidy, ns follows:
A. nardenetl. I’olished and Plated
B. Poli.shed and Plated,
C. Hardened otdy.
D. Polished only.
E. Soft, not ]K)lished.
F. Hardened and Polished.
H. Blued.
TTiese letters MUST BE USED when tlu'y
ear in the list
ami AFTER the number, as in the list.
In this scries
201)01)1 to 20ir)0n are Senwv Numbers.
201fi01 to 201800 are Nut Numbers.
201801 to 202000 are Holler Numbers.
202001 ami upward are numbers of Macinne Parts.
'The figures in the second column refer only to the plate
in which the ilhistlation of the part is shown and are NOT TO
BE USED in ordering.
Two or more mmdiers over a cut indicate that the dilTerence
between such parts is not visible in an ilhistration.
Parts marked with an nsteri.sk '*) are furnished only when
repairs are made at the factory.
VERTICAL HOOK. ROLLER PRESSER. CONTINUOUS
WHEEL FEED. HORIZONTAL UNDER TRIMMER
No.
»227701
202247
20027811 14170
202248
2012.'!r)
2000l0t:
200004I-:
2020071
227702
2.27748
202299
Plate
14277
14171)
1 4270
14170
1 4170
14170
14178
14.277
FOR
MACHINE No. 110wl21
For Leather Work
Name
Arm
Cap
..........................
“ Screw
..................
“ “ Washer
Position i’in (2)
Screw (2) ...............
Waslier (2) ...........................
Siiaft witii 20(Kf.57t: and 2021OU
“ Hnaiiing lliack) witli
2n22!)i) ....................................................
__
Arm Siiafl llnsliiiig (inick) Oil
Packing (wick)
.........................................
M Parts for Machine No. 110w121
No. Plate Name
20II(I71f, 1417(> Ann Sliaft ISiisliing (l)ack) Screw
2(12245 14277 Ann Shaft liiishiiif; (froiil) witli
(I!) ................................................................
2022(i0 - -
20202.fi ninl 2022fi0
......
Ann SliafI HiisliiiiK (froiil) Oil
.............................
I’acliiiif; (wick) ......................................
2(10502(1 1417fi Ann Sliafi linsliiiiK (frcini) Oil
I’ackiiif!: 'riuniib Scri'w
...................
2(120,'!() 1417fi Ann Sliafi liiialiinn (front) i’osi-
tion Pin
......................................................
200338c 1417G Arm Sliafi linsliinK (fmnl) Sel
Screw
..........................................................
202100 - - Ann Shaft Oil Pai’kiiiK (wick) ...
2(M):!B7n 14170 ......................................Stop Screw..
202i;:!2 14277 “ Shle Plate ................................................
20040211 14170 “ " “ ’I'lniinli Screw ....
222842 14178 Halance Wheel (In'll proove 22 in.
(Ham.) with 2iio:;2Si ami 2(1022,.Or
2O0O02II 14170 lialaiUK' Wlii'cl Adiiislinp Screw ..
200228c 14170 “ “ Posilion Screw ....
20022.5c 14170 “ “ Sel Screw
♦22,8,501 - Hed
......................................................................
202258 1 4277 “ Hinge Connection (2)
.........................
....................
200,570c 1117(1 ■' " " Screw (4) ....
22,8502 14277 " Slide (hai-k) ...........................................
22.281 1 1427(1 “ " " Slop
222812 14270 “ “ “ Spring
22770(1 14277 “ “ (front)
202,470 14170 llohhin
...............................................................
................................
...............
...........................................
♦2O2..520 “ Case .......................................................
202,(148 14170 “ “ Lalili
*20205(1
202472 14170
........ .....................................
.........................
202474 1417(1 “ “ “ S|iring
220078 141 7(1 " “ (.ever
*20247(1 ' " “ “ I'lccelilrie
..................................
Pin
...................................
Plunger
.........................
...........................
.......................................
................
20 1242 1417(1 " " “ “ Posilion I’in
225751 14170
20005011 10881 .......................................
202478 14178 “ “ “ Slido Sind
202214 1417(1 “ “ 'Pension Spring
.........................
Pnlcrnni
Scri'w ....
.........................
....................
.................
200l)84c 14176 “ " “ “ Uegnlal-
ing Screw
..................................................
200,5!)4c 14170 liolibin Case 'Pension S)>ring Sen'w
202210 “ “ Waslier (cloth) .....................
202521 1417(1 Holiliin Case eoinpli'tc. Nos. 2005t)4c,
200i)84c, 20205(1, 202214, 20221(1,
202472, 202474, 202520 and 202048
228502 14270 Edge Guide
2011211) 14276 “ “ Screw (2)
......................................................
..................................
Parts for Machine No. 1l0w121
No. Plate Name
210011 14277 Pace Plate ..........................................................
202125 14170 " “ Posilion Pin
200 1721: 14170 “ “ 'Pliiinili S( ri'W
227771 I 1282 Ki'od Wlii'cl (knurled)
25()0S5|' 14170 “ " Ad,jns(ing Sei'ew
..............................
......................
.................................
.................
227708 14170 “ “ “ “ liliuk
227700 14180 " “ llraekel
227710 11170 “ " •' Siiring
.....................................
........................
227712 14170 “ " Driving Gear will)
2002,82c and 2(U220c (for 10
sGIclies)
.....................................................
201220c 14170 Kecd Wliecl Diiviiig Gear I’osilion
Screw ...........................................................
2002,82c 14170 l<'vril WIn'id Drii'ing Gear Si'l Sen'w
22771N 14170 “ “ “ I’inion w i I li
200282c and 201220c (for 111
s(ilclies)
......................................................
201220c 14170 (-'ecd Wheel Driving Pinion I’o.si-
(ion Screw
.................................................
2002,82c 11170 Peed Wlicel Driving Pinion ,Sc(
Screw ...........................................................
227721 I1ITX (<'eed Wlieel Driving Sliafi
.......................
227722 14170 “ '' “ " Hnsliing
(hark) ..........................................................
227722 14170 Peed Wln'i'l Driving Shaft Hnsliing
(froiH)
........................................................
2002(12c 14170 l''eed Wheel Driving Sliafi Hnsliing
Sel Screw
...................................................
221742 11 170 Peed Wlii'el Driving ShafI Collar
willi (wo 2002S0C ...................................
2()()2S()C 11170 i>'eed Wln'el Driving Shaft Collar
Se| Screw ....................................................
227724 14170 l''eed Wlieel Driving SliaK, Gear
wilh 2(l0278c and 201220c
..................
201220c 14170 l''eed Wlimd I Iriving Sliafi (h'ar Po
silion Si're\v
.............................................
2m)27Sc 14170 l<’i'('d Wlu'i'l Driving ShafI Gear Sel
Seiew
...........................................................
227725 14170 l'’eed Wln'el Sind ...........................................
2nifi07c 14170 '■ “ “ Nnt
...............................
*202482 Hook (si'wing) ..............................................
227726 14181 “ 2024.82 wilh 20125:',i'. 20i::76c
and 221 148
...............................................
227727 - - Dook and Hobliin Case compli'te.
Nos. 202521 and 2:!772fi
.....................
225755 14181 Dook Hevel Gear Socket, 18 H'i'lh
225527 14181 “ “ " " Hnsliing
(lower) (lirass)
........................................
200262c 14170 Dook Hevel Gear Socket Hnsliing
(low('r) Set Screw
..................................
lo Parts for Machine No. 110w121
Parts for Machine No. 110w121
11
No. Plate Name
2.1.')7r)S 14181 Hook Hovel (¡ear Socket HusliiiiK
(upper) (brass)
.......................................
449i: 14181 Hook Hovel (¡ear Socket Hustling
(n])Iier) Set Screw
................................
200.').').')H 141S1 Hook Hovel (¡ear Socket Screw ...
14181 “ “ “ “ T li rust
Washer .......................................................
211552!) 14181 Honk Driving Hovel Gear with two
:i.5mi8!)c ...................................................
ShOORflc 141R1 Hook Driving Ih'vel Goar Hot Screw
287728 14178 “ “ Shaft
2;!5857 14181
.............................
2m).'!74r and 20():i!)nc
.........................................
Hovel Gear with
......................
287729 14180 Honk Driving Sliaft. Hovel Gear
Housing with 2()(K!4ti( ami three
2(l08(i2(
....................................................
287780 14180 Hook Driving Shaft t!i‘vi'l Gear
Honstng Gait (hotlont)
........................
2:i77:il 14180 Httok Driving Shaft Hevcl (tear
Hou.sing Gap (tiotlnm) Gasket ..
2377,'{2 14180 Hook Driving Shaft Hevcl Gear
Hou.sing Gap (side)
..............................
2,1773.3 14180 Hook Driving Sliafl Hevi'l Gear
Housing Gap (side) Gaslnd ....
20005.3c 14181 Hook Driving Sliaft Itevel Gear
Housing Gap Screw (4) ........................
201082k 14181 Hook Driving Sliaft Ite.vcl Gear
Housing Screw (long)
...........................
2255.32 14.37(! Hook Driving Sliaft Hevel Gear
Housing Screw (long) Washer . .
201.308k 14181 Hook Driving Shaft Hevel Gear
Housing Scnnv (short)
.........................
2()0.39fic 11G07 Hook Driving Shaft, Hevel Gear I’o-
•sition Screw ............................................
200.374c 14181 Hook Driving Sliaft lievel Gear .S(>l
Screw ..........................................................
2.37734 14181 Hook Driving Sliaft Hustling (hack)
2003fi2c 14179
Set Scn'w
..................................................
23.5531 14189 Hook Driving Sliaft Hushing (front)
200347c 14181
Set Screw
..................................................
221743 14179 Hook Driving Sliaft Collar witli two
200380c
......................................................
200380c 14179 Hook Driving Shaft Coll.ar Set
Screw ..........................................................
221 148 14181 Hook (¡ill ..........................................................
20l37fiK 14181 “ " Hing(! Screw
............................
201253k 14181 " " Screw ............................................
No. Plate Name
237735 14180 Hook Saddle with 449c, 200347c and
tliree 200.3fi2c .........................................
235534 1 4370 Hook Saddle Oil Cover
...............................
2011S5II I4.37(>’ “ “ “ ‘‘ Screw (2)..
20I.31SI.: 14370 “ “ “ Slop Screw (2)..
235535 “ “ Oiling Felt
202200 “ “ “ Wick
235049 14370 " .......................... Cover
20010!)ii 14,370 “
......................................
201308k I4I8I " '■ Screw (2)
..............................
..............................
.................
Screw
............
2i:h)lS 14370 “ Waslier willi 203476 and two
204243 .........................................................
208490 1 4:’,77 Knee Idfter Connection bevel' ....
20020211 14370 “ “ " “ Hinge
Screw ...........................................................
23,7701! 14378 Knei' Idfter Gomiection I.ever Gift
ing Hod willi 202302
.............................
202:!02 14370 Knee Idfter Goiineclion Gever Gift
ing Rod Goiter Hiu
202087 14378 Knee liifler Gifting Gever
................................
.............................
20020211 143,70 " “ " “ Hinge
Scnnv ...........................................................
2.3K504 14371: Knife
20П392С 1 4370 “ Adjusting Screw
.............................................................
...
23,8509 14370 “ Driving Kcciuilric willi two
200380c
................
......................................
23S510 143,78 Knife Driving Kccentric Oil I’an
20105SK 14370
Screw (2) ....................................................
‘200380c 1 43,70 Knife Driving Kccentric, Sef Screw
238511 14370 " “ Fork with Iwo 20075,8
23.8512 14370 “ “ " l>ever
..................
23.8513 14378 “ ..........................Hraclfet with
200378c .......................................................
202120 14370 Knife Driving Fork !>cve,r Hraclud,
I’osilion 1‘in (2) ......................................
20105,Ч1: 14370' Knife Driving Fork Fever liracket
Scresv (2) ...................................................
210910 1 1007 Knife Driving Fork Lever Hinge
Stud with 202277
....................................
202277 Knife Driving Fork I.ever Hinge
Stud Oil Hacking (wick)
......................
200378c 14179 Knife Driving Fork Gevi'r Hinge
H(ud Sot Screw
.......................................
200758 — - Knife Driving Fork Oil i'ackiiig
(wick) ..........................................................
20OO8O11 14370 I'Cnil'e Driving Fork Screw
238522 14370 “ “ “ " Hearing
232321 14379 “ “ " Slide Hlock
...................
IJ
No.
2()0252i'
2IU.52Sr:
2:18.514
2:18515
10!)4i'
:!5ni54i:
2:18510
2:18517
Plate
14379
14379
1 4378
14378
14379
14379
14379
1 437!)
2:18518 14.37!)
:i50i55n
20010!)ii
14379
14370
2:i7!):i7 14.379
202552
11007
22:1087 14.379
200101n
2()2:i:i:!
11007
111)07
202254
2()0:!74r
14181
20():i8:ir 14379
♦2008!) 1
202:129
__
11007
202:1:10
20008Гц '
202092
11007
1418.3
2377:17
20:il72
200428Г
2(l0.3.35i:
202004
11007
1 1 007
14170
14183
237738
♦38127
_______
Parts for Machine No. 110w121
Name
iiifo DriviiiK Korl
I liiigp Screw . . . .
nife Di'iviiiK Fori
Hinge Sciew Nnt
nife Driving Dover
Dingrr I’lale
Screw (2)
...................
inife Driving I.eve:
Hearing ......................
“ Dinge H(‘aiing
“ Scirrw
Screw (2)
....................
........................
Connecling lyinli
(inard
(iiiarrl Scir'w
..........................................
Nernllii Dm- ronni'cling lank Slird
with 2022.h(
.............................................
Nci'dle liar Cniinerding Dink Sind
Oil I’ardring (wirdi)
............................
Needle II,ar (kmiirnding l.ink Sind
Sel Serew
..................................................
Needle liar Onnnerding I.ink Sind
Srd Screw
.................................................
Needle llirr Cnnnr'cting SInil ...............
“ “ “ “ 20i;,S!ll
wilh 201)0,SiM and 202:i:!(l
.............
Needh' liar Connr'rding Sind Oil
Packing (wirdO
......................................
Neeille liar Oonnerding Sind Piixdi
Screw ..........................................................
Needle liar Cratrk with 20(i:!:!!',i ,
200:i7P , 200:i,s;’,r, 200I2S( ami
202:i:i:i ......................................................
Neerlle Par Crank 202IÍII2 wilh
2(I2:I2!). 202:!!)!), 202'll)0, 202502 rrnd
2:i77l!2
......................................................
Needle llai' Ci'ank Fiaclion Washer'
“ “ “ I’osiliott Scrr'w . .
“ “ “ Srd Scrr'w
“ “ lintdi Franre
.................
.........................
“ 202i;ii4 with
2:i7!):i7 ......................................................
Neerlle lirrr Rock Frrrrrrt' Drivirrg
Krrceniric .................................................
Oil
No.
Plate
237749
35OD171'
44 3i'
21331
14:i7S
14:179
11379
2I3:;2 1437!)
93411
14379
1 io:ii M37!l
21711
1 1,37!)
7071 1437!)
2:!7750
2377:19 14183
2000291', 1437!)
2.37740
210910
11.37!)
1 1007
202277
2l)o:i I7r
21)2000
14 181
11007
200098I'' 11007
202007
14378
210978
202008
210920
11007
14.380
2011411 14380
2003801'
14370
Parts for Machine No. 1l0w121
Name
Needle liar Rerdi Frrrrrrrr Dr'ivirrg
Fccerrir'ic llody
.....................................
Nm-rlh' llrtr- lintdi Fr'aint' Drivirrg
Kccrrriric llody Positiorr Sci'ew..
Needlr- liar Peek Fr'ame Drivirrg
Fccerrir'ic llody Se' Screw
.................
Nci'dle liar Pock Fr'amr' lli'iving
Fecr'irlrie I’ressrrre S|rr'ing ............
Needle liar Pock Fi'aine Driving
Fccenir ic I’K'ssrrre Spr irrg Cap. .
Needle liar' Pock Fr'ante Drivirrg
Fccerrir'ic Pi'essrne Sprirrg Crrp
Scr'cw
.........................................................
Nei'ille liar' Pock l'’ranre Driving
Fccenli'ic Ri'gnlaling Screw ....
Needle liar Pock Frarrre Drivirrg
FccerrI rir Sel Screw
.............................
Neeilh' liar' Pock Fr'arrie Driving
Ficcentric Set Screw Washer ...
Neerlle liar' Pock Frame Driving
Fci'i'nl r ic complete. Nos. 217ii,
4t:!c, !):mo, iio:ir', 7071, 21:1:11,
21:1:12, :i.SI27, 2:177 1!) rrrrrl ,450107i'
Nei'ille liar Pock' Frarrre Drivirrg
li’ork Dover willr 20002!)i: ................
Neerlle liar Rock Fr'anre Dr'ivirrg
h'lii'k Dover' Pirrch Serew
.Nei'ille liar Pock Fr'ame Driving
l‘'ork Devi'r' Sliile lllotdi (two
iriei'i's)
......................................................
Neerlle liar Pock Franri' IlitrgeSIml
wilh 202277
..............................................
Neeilli' liar' Rock h’r'ame I lingo SIriil
Oil Packirrg (wick) ................................
Nei'ilh' liar' Pock Frame 11 irrge SI ml
Si'l Scrr'w
.................................................
Nr'r'dii' Par Pock Frarrri' Posilirirr
Prar'ki'l .....................................................
Nt'r'ille Par' Pock Frami' Posilirirr
Pr'acki't Scrr'w
......................................
Nr'i'iile Par Rock ii'r-amr' Ror'k Siiafl
202i;il7 wilh 200:1,SOc arril 2I0!)20..
2020(1,S with 201 Dili:
.........................
d'l'ille Pitr Riirdr Franre Sliile Plock
Screw St ml ...............................................
let'illi' Par Poi'k Frame Sliile Plock
Screw Stnd Set Screw
...........................
i;i
................
I l Parts for Machine No. 110w121
No. Plate Name
200141k 11007 Needle Set Screw
207072 11007 Presser liar Hushing (2)
...........................................
.......................
200.2.')2e 14280 “ “ “ Set Screw (2)
202071 14280 “ " Liflor ................................
2000.02c 14280 ............................Hinge Screw . .
202072 14280 “ “ Hifling Releasing Lev
er liracket
.................................................
200975k 14280 Presser Par Lining Releasing Lev
er Bracket Unide Screw
......................
227765 14280 Presser Bar Lining Releasing Lev
er Braidiet Spring (spiial)
..................
202227 142,80 Presser Bar l’osition Guide ......................
202228 14280 “ “ “ “ Lever
wilh 200080k
...........................................
200080k 11007 Presseï- Bar Posillon Guide Lever
Pinch Screw
.............................................
200252c 14280 Presser Bar Position Gni(ie Sel
Screw ..........................................................
210948 14278 I’ressi-r Bar Sining (rial) ...........................
210949 14280
.............................
200080c
......................................................
Bracket with
200080c 1 1007 Presser Bar Spring Bracket Pincli
Screw
..........................................................
200528c 14380 I’resser Bar Spring Regnlaling
Screw
..........................................................
200948c 14280 Presser Bar Si>ring Hnpporl Screw
201971
------
Roller I’resser, 1) in. diain., .¡k in.
fac(! (fine)
................................................
201972 14280 Roller Presser 201971 with I52S.T,
1700c, 50552c anil tweni y-l'mir
10222
..........................................................
202420 14280 Roller Pressor Ann
228527
------
“ “ ■' 202420 willi
.......................................
201972 ........................................................
202500 14380 Roller Presser Ann Bracket (swing)
238528
------
“ " " " 202.500
wilh 20009011 and 228527
..................
200075c 14280 Roller Presser Arm Bracket I’osi-
llon Screw Stud
......................................
202558 14280 Roller Presser Arm Bracket Sining
202559 14380
Stoi)
............................................................
200141k 11007 Roller Presser Arm Bracket Spring
.Stop Screw
2000901) 14280 Roller Presser Ann Screw
10232 -
..................
“ “ Ball, ii'k in. diameter
1760c 14280 “ “ “ Cone
202557 14182 " " Bar
..............................................
.............................
............................
..........................................
50552c 14280 “ ” Hinge Screw
1528.1 14280 “ ............................Nut ..................
......
Parts for Machine No. 110w121
No. Plate Name
228529 14278 Roller I’ressi'r and Bar complete,
Nos. 200075Г, 202557 to 202559,
228528 and two 200111k
......................
202008 14182 Spool Holder Base ..........................................
20057511 14281 ‘‘ “ “ Scn-w
........................
2П421Ю 14182 “ “ Wire ..........................................
20007911 14281 “ “ Hingi. Screw ...
204297 14182 Siiool Holdi-r complidi', Nos.
200079)1. 202008 and 204296
2277l')2 I 1281 'l'ake-u|) Levin-
.................................................
.............
202299 14281 “ “ Hiiving Sind wilh
202277 .........................................................
202277 - 'Гакецр [.ever Driving Sind Oil
Backing (wick) .........................................
2024(10 142S1 Taki'-nii I.evci' Hinge Stud witli
202422 .........................................................
2П2422 — Take ni) Lever Hinge Sind Oil
Packing (wick) .........................................
20П202С M2SI 'I'akcuii Lever Hinge Stud .Set
Screw ...........................................................
202 in I 'I’ake np Lever Oiling l''ell......................
2001221: 14281 “ “ “ “ Screw'..
202402 11010 Tension Dise (hack)
.......................................
210907 noil) " ■' (front) ..................................
210950 14281 “ Release Driving Lever wiUi
200294c and 202070
...............................
202070 142,SI Tension Rtdease Driving Lever Pin
202077 14281
Slide Bar
....................................................
210900 Tension Rehnise Diiving Lever I’in
Slide Bar 202677 will) 200167!-; and
210952 .........................................................
202078 I 1281 Tension Release Driving I.ever I’in
Slide Bar Sindiig......................................
20029 1c 14281 'I'ension Release Driving I.ever Sef
Sriew
210951 11010 Tension Release Washei'
...........................................................
.............................
202407 I08SI “ Spring ...................................................
2OO025K 11010 “ Sind with 204925 ..............................
200001c 14281 “ ■' Sel Sinew .................................
204925 I 1010 “ “ W'ashei201572a 108,81 “ TIinml) Nnl
....................................
.........................................
210952 11010 'I'ension comph'le, .Nos. 2OO025i ,
201572)1, 202402. 202107. 202082,
210951 and 210967
202082 1 1010 Thread GonI roller Spring
210952 11010 “ “ “ Slop
.................................
.........................
................
20(m;7i--. 11010 " “ “ “ Screw
210955 11610 “ Guide (upper) ..................................
Loading...