SINGER 107W17 User Manual

SINGER

107W17

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the PART number in the FIRST

column.

The number stamped on a Sewing Machine Part is the number of the
Single Part only, except when the part includes Set Screws, Clamping Screws,
Studs and Rollers Spun on. Small Wires riveted, or Parts soldered together,
etc. , which it is necessary to furnish in combination.

Every combination of parts sent out has its specific number which,
although not stamped on Parts (except in above case) must be used when
ordering the combination.

Each number always indicates the SAME PART in whatever list it appears,
or for whatever Machine.

The letters after some of the numbers indicate the style of finish only, as
follows;

A Hardened, Polished, Nickel Plated and Buffed.
AL Heat Treated for Toughness.
ALX Heat Treated for Toughness and Black Oxide.

B Polished, Nickel Plated and Buffed.

C Hardened only.
D Polished only.
E Soft, Not polished.
F Hardened and Polished.

J Nickel Plated only.

R Merlized
X Black Oxide, for Iron and Steel.
XC Hardened and Black Oxide, for Iron and Steel.

Y Black Nickel Plated only.

Z Chromium Plated.

These letters MUST BE USED when they appear in the list and AFTER the

number, as in the list.
In this series:

I to 1500, 200001 to 201500 and 350001 to 351500 are Screw Numbers.

1501 to 1800,201501 to 201800 and 350501 to 351800 are Nut Numbers.

1801 to 2000,201801 to 202000 and 350801 to 352000 are Roller Numbers,

2001 to 50000 and 202001 to 350000 are Numbers of Machine Parts.

The figures in the second column refer only to the plate in which the

illustration of the part is hsown and are NOT TO BE USED in ordering.
These Plates are in Form 20500, Illustrations of Parts.

Parts marked with an asterisk (''=) are furnished only when repairs are

made at the factory.

LIST OF PARTS COMPLETE

FOR

MACHINE NO. 107wl7

LOCK STITCH. SHORT ARM. TWO NEEDLES,

DROP FEED. ZIGZAG.

MAKES TWO ROWS OF STITCHES FOR GAUGES

FROM 1/32 TO 7/32 INCH.

MAXIMUM STITCH 5 TO THE INCH.

FOR ORNAMENTING SPORT CLOTHES,

SHOES, GLOVES. ETC.

No. Plate Name

*242151

242102 18902 Arm Cap
200278X 18902 Arm Cap Screw
202248 18902 Arm Cap Screw V/asher
204235 16826 Arm Position Pin (2)
200004E 16826 Arm Screw
200010E 16826 Arm Screw (2)
202005 16826 Arm Screw Washer (3)
202249 18902 Arm Shaft with 224392 and 350431E
240802 18902 Arm Shaft Bushing (back) with 202244
202244 18902 Arm Shaft Bushing (back) Oil Packing (wick)
200338C 18902 Arm Shaft Bushing (back) Set Screw
207080 18902 Arm Shaft Bushing (front) with 202244
202244 18902 Arm Shaft Bushing (front) Oil Packing (wick)
200502X 18902 Arm Shaft Bushing (front) Oil Packing Thumb Screw
200341C 18902 Arm Shaft Bushing (front) Set Screw
224400 16000 Arm Shaft Connection Belt (reinforced neoprene)
202635 16826 Arm Shaft Connection Belt Pulley with 200327C, 200602C

200602C 16826 Arm Shaft Connection Belt Pulley Position Screw
200327C 16826 Arm Shaft Connection Belt Pulley Set Screw
202253 16826 Arm Shaft Connection Belt Pulley Spring Flange
224392 18902 Arm Shaft Oil Packing (wick)
350431E 18902 Arm Shaft Oil Packing Stop Screw

*210504 --------- Bed

210844 16826 Bed Hinge Connection (2)
200060E 16826 Bed Hinge Connection Screw (4)
210505 16002 Bed Plate (back)
200577AL 16002 Bed Plate (back) Screw (2)
210616 16002 Bed Slide (front)

-

-------

Arm with 202135

and two 202253

PARTS FOR MACHINE NO. 107wl7

No.
263099
210846 18908
242103
242104 18908

210913 18908
210914 18908
210735
21Q734 18908
210736
200964C 18908
210764 16827
200076D
242105
201016C 18908
2C0592C 18908
242106 18908
242139 16895
202135
200462X 16002 Face Plate Thumb Screw
210512
242189
266005
200988F
202276
210514
210515

200035E
200253C 16827
20153 IE
210518 16838

200106E
202297
202624

200038C
200545C
201518E
203101 18913
200054E
202300 16826
203098 16826

201014C
201525E
202301

Plate

18908
18908

18908
18908

16827
18908

16895
18926

18926
18926

18926
16827
16827
16827

16827
16827
16898

18913
16827
16827
16826
16826

16826

16826
16826
16826

Bobbin
Bobbin Case Base
Bobbin Case Cap with 200592C, 201016C and 242105
Bobbin Case Cap complete, Nos . 200964C, 2 10736,

210914 and 242103
Bobbin Case Latch
Bobbin Case Latch 210913 with 210734 and 210735
Bobbin Case Latch Fulcrum Pin
Bobbin Case Latch Lever
Bobbin Case Latch Spring
Bobbin Case Latch Stop Screw
Bobbin Case Stop
Bobbin Case Stop Screw
Bobbin Case Tension Spring
Bobbin Case Tension Spring Regulating Screw
Bobbin Case Tension Spring Screw
Bobbin Case complete, Nos . 2 10 846 and 242104
Face Plate
Face Plate Position Pin

Feed Bar
Feed Bar 210512 with 266005 and 266011
Feed Bar Hinge Stud (eccentric)
Feed Bar Hinge Stud Set Screw
Feed Bar Slide Block
Feed Bar Slide Block Crank with 200035E
Feed Bar Slide Block Crank 210514 with 200253C,

201531E and 202276
Feed Bar Slide Block Crank Pinch Screw
Feed Bar Slide Block Hinge Screw
Feed Bar Slide Block Hinge Screw Nut
Feed Dog, for 210600
Feed Dog Screw (2)
Feed Driving Connection with 200054E and 203101
Feed Driving Connection Crank with 200038C
Feed Driving Connection Crank Pinch Screw
Feed Driving Connection Hinge Screw
Feed Driving Connection Hinge Screw Nut
Feed Driving Connection Oil Packing (wick)

Feed Driving Connection Pinch Screw
Feed Driving Eccentric Regulating Bracket
Feed Driving Eccentric Regulating Bracket 202300

with 202635,two each 201014C and 201525E

Feed Driving Eccentric Regulating Bracket Hinge

Screw

Feed Driving Eccentric Regulating Bracket Hinge

Screw Nut

Feed Driving Eccentric Regulating Bracket Plunger

Name

PARTS FOR MACHINE NO. 107wl7

No. Plate Name

202595 16826 Feed Driving Eccentric Regulating Bracket Plunger

Spring

200607C 16826 Feed Driving Eccentric Regulating Bracket Plunger

Spring Stop Screw
201011^0 16826 Feed Driving Eccentric Regulating Bracket Stop Screw
201525E 16826 Feed Driving Eccentric Regulating Bracket Stop Screw

Nut
200429F 16826 Feed Driving Eccentric Regulating Screw
200383C 16826 Feed Driving Eccentric Regulating Screw Check Screw
26601 1 18926 Feed Driving Rock Shaft with two 200988F
202625 16827 Feed Driving Rock Shaft Stop Collar with two 200383C (2)
200383C 16827 Feed Driving Rock Shaft Stop Collar Set Screw
202306 18913 Feed Lifting Connection with 200054E and 203101

^'210645

210589 16827 Feed Lifting Connection Crank 210645 with 200050C and

200050C 16827 Feed Lifting Connection Crank Pinch Screw
200378C 16827 Feed Lifting Connection Crank Set Screw
202307 18902 Feed Lifting Connection Eccentric with 200382C and

200437C 18902 Feed Lifting Connection Eccentric Position Screw
200382C 16827 Feed Lifting Connection Eccentric Set Screw
200545C 16826 Feed Lifting Connection Hinge Screw
201518E 16826 Feed Lifting Connection Hinge Screw Nut
203 10 1 18913 Feed Lifting Connection Oil Packing (wick)
200054E 16826 Feed Lifting Connection Pinch Screw
21053 1 16827 Feed Lifting Rock Shaft (hollow) and Hook Driving Shaft

202625 16827 Feed Lifting Rock Shaft Stop Collar with two 200383C
200383C 16827 Feed Lifting Rock Shaft Stop Collar Set Screw

202310 18902 Feed Regulating Spindle with 202311, 202443 and 202169

-‘'20231 1
202443 18902 Feed Regulating Spindle Head Pin
202619 18902 Feed Regulating Spindle Head Position Pin
224432 18908 Hook (sewing) with 203101 and 263134
224433 18908 Hook 22443 2 with 200 145C , 2 1 05 36, 210541 and three

224459 18908 Hook and Bobbin Case complete. Nos . 224433 and 242106

210614 16827 Hook Driving Bevel Pinion (steel) 24 teeth, with two
200378C 16827 Hook Driving Bevel Pinion Set Screw

210535 16827 Hook Driving Bevel Pinion Shaft
202661 16827 Hook Driving Bevel Pinion Shaft Belt Pulley with 202324

20037 8C 16827 Hook Driving Bevel Pinion Shaft Belt Pulley Set Screw
202324 16827 Hook Driving Bevel Pinion Shaft Belt Pulley Spring

210536 18908 Hook Gib
200596F 18908 Hook Gib Screw

--------

--------

Feed Lifting Connection Crank

200378C

200437C

Bearing

Feed Regulating Spindle Head

200596F
200378C

and two 200378C
Flange