SINGER 107W13 User Manual

SINGER

107W13

Instructions for Ordering

]n ordorinp; frniii Uiis li.sl, \iec ONLY (lie PART Mimilier in

the FIRST column.

The nnmher stumped on a Sc\vini>; Machine Part is tlio

nnniher of the Single Part only, except when (he part includes
Set Screws, Chiniping Screw.«, Studs and Hollers S[hiii on, Small
Wires riveted, or Parts soldered together, etc., which it is neces
sary to furnish in combination.

Every combination of parts sent out. has ils specilic nninber

which, although not stamped on Parts (except in above case),
must be used when ordering the eombinalion.

Each number always indicates the SAME PART in whatever

list it appears, or for whatever Machine.

The letters alter some of the numbers indicate (he style of

finish only, as follows:

A. Hardened, Polished and Plated.
B. Polished and Plated.
C. Hardened only.
D. Polished only.
E. Soft, not ]iolished.
F. Hardened .aml Poli-hed.
H. Hhred.

J. Nickle Plali'd only

R. Merlized.

Y. Black Nickle Plated only.

The.se letters MUST BE USED when (hey apjiear in (he list

and AFTER the number, as in the list.
In this .scries

20(X)01 to 201.'')00 and d.hlinol to

201.'j01 to 20181K) and :ir)1.50l to
201801 to 2n20;>l) and li.olHOI to

202001 to 3,50000 are Numbers of Machine Parts.

The figures in the second column refer only to the plate
in which the illustration of (he part is shown and aie NOT TO
BE USED in ordering.

'Pwo or more numbers over a cut indicate that the difference
between such parts is not visible in an illustration.

Parts marked with an asterisk (*) arc furnished only when
rcjiairs arc made at the factory.

■"il.àOOare Scicw Numbers.

T) 1800 are Nut Numbers.

i.52001) are Jioller Numbers.

LIST OF PARTS COMPLETE

FOR

MACHINE No. 107wl3

HIGH SPEED. TWO NEEDLE ZIG ZAG

For Straight and Zig Zag Air Tucking and Cording

Needle Holder adjustable from ;,b to T, inch

No.

*2)21(11

2\2i02 172S1
20027X11 10777
20224S

20 122:7 I0T77
20001 Or;
20L0II7 10777
2022'11)
202212

2t)2‘24t

20022SC 10775

2070X0

Plate
—

1 0777

10777 “ Screw (2)

iota:;
10772

17284

Arm

......................................

“ Pii|) ...............................

“ “ Hcr«nv ....

“ I’dsition Pin (2)

“ “ Washer (2)

“ Shaft with 200277r: and

“ “ Bushing

2022.11

Arm Sliaft Bushing

Packing (wick) ....

Arm Sliaft Bushing

Screw .............................

Arm Shaft Bushing

20224.1

Name

■ Waslier

..................

.........................

...........................

................

(hack)

(hack

(hack ) Set

(front)

203100

witli

) Oil

with

Parts for Machine No. 107w!3

Parts for Machine No. 107w13 !)

No.

202244

Plate Name

------

Arm Shaft HuKliinp; (front! Oii

I’acking (wick)

.......................................

200.503H lOT.'i.'j Arm Sl)aft HitaliiiiR (front) Oil
i’ackiiiK 'I'tninili Screw

.....................

200241c 1075Г) Arm Shaft. HuKliing (front) Set,

Screw ..........................................................

210.702 107.52 Arm Shaft (’oinieclion Hell

......................

2020.25 1075.2 “ “ “ “ I’lilloy
with 2002271’, 20n(;02v, and two

202252

........................................................

200602F, 10755 Arm Shaft Cnnneclioii Helt Ihilley

Position Screw

........................................

200327c 1075.5 Arm Shaft Connection Belt Pulley

Set Screw

..................................................

202253 10757 Arm Shaft Comiection Bolt PuUey

20,2100

SprinK I'^IanKo

------

Arm Shaft Oil I’ackiny; (wick) ...

.....................................

200’357К 10755 “ “ “ " Slop Screw

202255 10752 Balance Wlicel (belt groove 21 in.

(liam.) with 20032,Sc' and 200:!:!5c

200328c 10755 Balance Wlieel Position Screw ...

2003,3.5<! 10755 “ “ Set Screw ...........................

*210504

202258 12345 “ Hinge Conneclinn (2)

--------

Bert

......................................................................

.................

200570c 10755 " “ “ Screw (1) ....

210505 15284 “ Plate (liack) ......................................

200577k 10755 " “ " Screw (2)

.....................

- 21flfilfi 15284 “ Slide (front) ...........................................

210530 15282 Bol)hin ..........................................................

210840 15283 “ Case Base ..............................................

242103 15283 “ “ Cap with 2005!)2c, 20101 Or

242104

------

ami 242105

Bol)l)in (.'ase Caj) complete. Nos.

...............................................

200.%4c. 2107.30. 2101)14 and 2421 0.3

210913 15283 Bol)l)in Case baldi

........................................

210914 15283 “ “ “ 210913 with

21(1734 and 210735

..............................

210735 15283 Bolihin Case Latcli Pnlenim Bin ..
210734 15283 “ “ “ bever

..........................

210736 15283 " “ “ Spring ......................

200964k 15283 “ “ “ Stop Screw
210764 15283 “ ‘ Stop

.........................................

200076П 1 5283 “ “ “ Screw

-----------

...........................

2 12105 15283 “ “ 'I'mision Sining ..................

201016k 15283 “ “ “ “ Uegn-

lal.ing Si'rew ............................................

2005921' 15283 Bobbin Case Ohnision Sliring Screw
2(2106-------------Bolihin Case complete, Nos. 210840

and 242104

...............................................

No. Plate Name

210681 15284 Face Plate ..........................................................

202135 10755 “ “ Position Pin
2001021! 10755 “ “ Tiiuml) Screw
210512 15286 Feed Bar

.............................

.........................

...........................................

210513 " “ 210512 with 2mi04lc,

201522k and 202023

..............................

20(l04lc 10755 Feed Bar Hinge Scri'W (driving)..

201522k 152S3 “ “ “ “ Niit ......................

202270 10700 “ “ Slide Block ...............................

210514 10700 “ “ " Crank witli

20U035K .....................................................

210515 10700 Feed Bar Slide Block (trank 210514

with 20025.311, 201531i: anil 202270

2000351', 10700 Food Bar Slide Block Crank Bincli

Screw ...........................................................

20025311 15283 h’oed Bar Slide Blocli Hinge Screw
20153 Ik 10700

Niil

................................................................

210518 15283 Feed Hog ............................................................

2001061; 10755 “ “ Screw (2)

..............

202297 10752 “ Driving Connection with

200054k ami 202277

..............................

202024 10700 l>’eod Driving Coniii'ct ion Craiilt

witli 2000381' ...........................................

2000:!,Si' 1070(1 Fecil Driving (toiiiiectiiiii (trank

Pincli Screw ..............................................

200545c ¡0760 Feed Driving Connection Hinge

Screw ...........................................................

201518k 10755 Feed Driving (tiinnecliiin Hinge

Screw Nut ..................................................

202277

------

Feed Driving Ctoniieclioii Oil Pack

ing (wick)

..................................................

200054k 10755 Feed Driving (toniiect ion I’iiich

Sirew ...........................................................

202300 10753 Feed Driving ICc.centric. Uegnhitiiig

Bracket........................................................

20tl09,8 10753 Feed Driving Fecentrie Uegiilaliiig

Bracket 202300 with 202(i35, two

eacli 2OIOM1' and 201525k

................

201014c 15283 Feed Driving lOeceiitrie Hegiilaliiig

Bracket Hinge Screw .............................

201525i; 10755 l''eed Driving Fecentrie liegiiialiiig

Bracket Hinge Screw Nut ....................

202301 10755 h’eeil Driving Fcci'iilric liegiilaliiig

Brai'lii't Bliiiiger

...................................

202595 10755 Feed Driving Fecentrie Hegiilaliiig

Bracket Bliinger Spring .......................

200(5071 10755 jcoeil Driving Fecentrie liegiilaniig

Bracket I’liinger Spring Slop

Screw ...........................................................

10 Parts for Machine No. 107w13

Parts for

Machine No. 107w13 11

No. Plate Name

201014f’ l.')283 Feed DriviiiK Kceeniric Rogiilalinj;

Bracket Slop Screw

...............................

21)15251.’, 10755 Feed Drivinp; Kccenliic Itc'Kiilalitig
Bracket Stop Screw Niil

......................

200129c 10755 Feed BriviriB Kccenliic Regiilaliiifi

Screw ..........................................................

200.38.'!(’ 10755 Feed DriviiiK Kccmilric Regnlatinp;

Screw Check Screw ...............................

2021)23 10752 Feed Drivinp Reck Shaft ........................

202625 10760 “ “ “ ■■ Slop Collar

witli two 200383c (2)

............................

200383c 10755 Feed DrivinR Rock Shaft Stoj) Col

lar Set Screw

...........................................

202306 107.52 Feed biftiiii!; Connectioii with

*210615

200054|.; and 202277

------

Feed Lifting Connection Crank

............................

210589 10760

210615 with 200050c and 200378c

200050c 10760 Feed Lifting Connection Crank

I’inch Screw .............................................

200378c 10760 Feed Lifting Conni'ction Crank

Set Screw

..................................................

202307 10760 Feed Lifting Connection Kccenliic

with 200382c and 200137c

..................

200137c 10760 Feed I>ifting Connection Kccentric

Position Screw

........................................

200382c 15283 Feed Lifting Connection Kccentric

Set Screw

..................................................

200545c 10760 Feed Lifting ConiK'clion Binge

Screw ..........................................................

201518i.: 10755 Feed lyifting Connection Bingo

202277

Screw Nnt

------

Feed Lifting Connection Oil I’ack-

.................................................

ing (wick) ..................................................

200051): 10755 Feed Tjifling Connection I’incli

Screw ..........................................................

210531 10752 Feed Lifting liock Sliafl (liollow)

and Book Driving Sliaft Bearing

202625 10760 Feed Lifting Rock Sliaft Stop Col

lar willi two 200383c..............................

200383c 10755 Feed Idfting Rock Shaft Stop Col

lar Set Screw

...........................................

202310 10753 Feed Regulating .Spindle willi

202311. 202113 and 202619 ................

*202311 -------- Feed Regulating Spindle Bead

_____

202413 15283 “ “ “ “ Pin

202619 15283 “ “ '■ Po.si-

tion Pin ......................................................

*210532

------

Book (sewing)

...................................................

No.

210533

Plate
15285

Book 210532 with 200115c. 203,101.

Name

21053,6, 210511 and lliree 200596c

212107

Book and Bobbin Case complete.

Nos. 210533 and 212106 .......................

210611 10757

Book Driving Bevel Pinion (sleeD,

24 teetli, with two 200378c

Hook Driving Bevel Pinion Set

20o:'.78c

10760

Screw ...........................................................

210535
202661

10752

1075::

Book Driving Bevel Pinion Shaft,

Belt Pulley with 202321 and two

200378c .......................................................

200378c 10760

Book Driving Bev('l Pinion Shaft

Belt Piillev Sot Screw.............................

Ho(ik Driving Bovol Pinii'ii Shiit't

202321

10757

BpU Ikilley Spring I^’langp

210536
2nnr)iM;i'­2o::ioi
200!B5|.'
210537
210615 10757

15285 Book Bil) ........................................................

15285

“ “ Screw

...................................................

“ Oil Wick .................................................

1 0757

10757

“ Position Screw

“ Shaft (liollow) .......................................

.....................................

“ “ Bevel Gear (steel), 21
leelh. willi two 200382c

200:!S2c

210621

1 5283

10757

Book Shaft Bevel flear Set Screw

“ “ Bushing

...............................................

210539 w 11 h

200931c and 210537 ...............................

2003,35c
2003IÌ3I'
202355

2009311.­210511
2001 15c

10755
15285
15285

10757
15285 " Washer Needle Guard
15285

237837 1528 1
210876

Book Slnift Bushing Set Sciew ....

“ “ '■ “ “ ....

“ “ “ “ “ Back
ing (brass)

.................................................

Book Sliafl Bosilloii Screw ......................

“ “ “ “ S(n'(‘w..

Knee Lifter Gonneclion Lever

„ „ .. 237837
with 202447, 210875 and two

‘-'0026211 ..................................................

2O0262U

10285 Knee Lifter Connection T.ever

Binge Screw ..............................................

202117 -

202:10:» 15285

15281 Knei' Lifli'r Connect ion Lever Lift

ing Rod with 2023.02

............................

Ivneo Lifter Connectioii Li'ver Lift

ing Rod Cotter Bin

................................

210875 15281 Knee Lifter Lifting Lever
2oo2li2ii 15 2S5

“ “ “ “ Binge

Screw ...........................................................

...................

................

........................

.......................

................

........................

Parts for Machine No. 107w13

Parts for Machine No. 107w13

Hi

No.

242108

Plate

15280
210543 15285
202333 15285

202254

—

200383c 10755

200374c 15285

210544 15285

2105S5

202277

—

—

210545 15285

210725 10753

203172
200428c
200335c
242109
210547
200334c

210548
200334c

15285

15285

10755

15286

1 5285

15285

15285

15285

210556 15286

210557 1 5285

200070c

202277

15285

—

200054k 10755

200387c
242J22
242123

15285

15287

15287

242124 15287

200130k

15287

Name

Ncetlle Bar ..................................................

“ “ Connecting Link

..................

“ “ “ “ Stnd

with 202254

..............................................

Needle Bar Conni'cting I/ink Stnd

Oil Packing (wick)

................................

Needle Bar Connecting Biiilc Stnd

Set Screw

..................................................

Needle Bar Connecting Link Stnd

Set Screw

..................................................

Needle Bar Connecting Stnd witli

202277 ........................................................

Needle Bar Connc'cting Stnd 210544

with 210545 ..............................................

Needle Bar Connecting Stnd Oil

Packing (wick)

........................................

Needle Bar Connecting Stnd Swivel

with 200387c

............................................

Needle Bar Crank witli 200335c,

200374c, 200383c, 200428c and

202333 ........................................................

Needle Bar Crank Friction Waalier

“ “ “ Position Screw

“ “ “ Set Screw ....

“ “ Frame witli 20ii070c
“ “ “ (inido SI nil . .
“ " “ “ “ S e t

Screw .................................................

Needle Bar Frame Hinge Stud

“ “ “ “ “ S e

Screw .................................................

Needle Bar Frame Pitman witli

200054F, and 202277

............................

Needle Bar Frame Pitman Kccem

trie Stnd ....................................................

Needle Bar Frame Pitman Fccen-

tric Stnd Set Screw' ..............................

Needle Bar Frame Pitman Oil

Packing (wick)

........................................

Needle Bar Frame Pitman Pincli

Screw ..........................................................

Needle Bar Set Screw

...............................

. “ Holder Body witli 20ln.30|.' ..

“ “ Slide (left i witli

200130c ......................................................

Needle Holder Slide (right) witli

2001301.’ ...................................................

Needle Holder Slide Screw' ....................

No.

Plate

212125 1 5287

20i030|.'
20(11301'
202300

210550

210551

20056611

I52S7
15287
10753

—

15286

15287

210552 15286

2003831

10755

200256(1 15287

201525k

10755

202301 10755

202505

200607c

200256(1

10755

10755

15287

201525k 10755

2IOC)00 1528(1

203172

200382c

15285

15283
210558 15286
21055!)

200378c

210700

200382c

15287

10760

15287

15283

200429c 10755

200.3S3C 10755

Name

Needle Holder coiiiplcte (adjiisl-

able from to nÇ in.), Nos.
242122 to 242124 and two 200130i.

Needle Holder Screw

.................................

“ Set Screw .............................................

“ Vilirator Eccentric Regnlat.

ing (tlirow) Bracket

..............................

Needle Vilirator lOcceiitric Regnlat

ing Bracket 202.300 witli 210552,
two each 20025rin and 201525c ..

Needle Vilirator Eccentric Regnlat^

ing Bracliel Cover (iilate)

...................

Needle Vilirator Eccentric Regnlat-

ing Bracket Cover Screw (4) ....

Needle t’ilirator Eccentric Regnlat-

ing Bracket Flange witli two

200383e

......................................................

Needle Vilirator Eccentric Régulai'

ing Bracket Flange Screw

...................

Needle Vilirator Eccentric Regnlal-

ing Bracdiet Hinge Screw

...................

Needle VHliralor Eccentric l{egnlal-

ing Bracket Hinge Scri'w .Niil . .

Needle Vilirator Eccentric Régulai'

ing Braidiel Plunger ..............................

Nei'die Vilirator Eccentric Régulai'

ing Bracki'l I’liingi'r Siiring ....

Needle Viiiralor Eccentric Regnlat

ing Bracdo'l I’liinger Sluing Slop

Screw' .........................................................

Needle Vilirator Eccentric Itegnlat'

ing Braidcet Stop Screw

......................

Nei'die Vibrator Eccentric Regnlat'

ing Braidiet Slop Screw Nnl ....

Needle \'iliralor Hear (spiral) witli

two 2003821'

............................................

Needle N'ilirator Hear l''riclion

Waslii'r

......................................................

Needle \dlirator (¡ear Set Screw . .

" Sliaft

...................

“ " “ “ Hollar

W'illi tw'o 2003>7So .............................

Ni'cdle Vilirator Hear Sliaft Collar

Set Screw ...................................................

Needle Vilirator I’iiiion (spiratl

witli two 2n03S2c

...................................

Needle Vilirator Pinion Set Screw

“ “ Regulating Screw

Chock .Screw

...........................................