SINGER 101-1 User Manual
Form 8775
October, 1921
PRICE LIST
OF
PARTS
FOR FAMILY SHOPS
MACHINE No.lOM
THE SINGER MANUFACTURING COMPANY
INDEX
PAGE
AcciiSSoHiivS........................................................................................................ 15
A'rrAClIME.N'Tri.................................................................................................. 16
ATrAciiMENT Set................................................................................................ 15
BomsiN' Winder.................................................................................................... 16
I'R-ECTIUCAE I’ARTS....................................................................................... 10
Uemmer.................................................................................................................... 16
Machine No. lOl-l.................................................................................................. 7
Motor I’ahts........................................................................................................ 13
N UMIORICAI, LiHT OE I’AliTS................................................................... 23
OdSOI.ETE I’AliTS............................................................................................ 21
Singer Ivnceosed Motors................................................................................ 13
Trimmings e'or Iseect-uk: Cabinet Table, Set No. IS
(Knee Control)................................................................................... 17
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A. Hardened, Polished and Plated.
Polished and Plated
B.
Hardened only.
c.
Polished only.
D.
Soft, not Polished.
E.
Hardened and Polished.
F.
G.
Blued
H.
Plated only.
J.
Hardened and Plated.
K.
Brass or Gilt.
L.
M.
Oxidized.
P.
Japanned.
Parkerized.
R.
These letters MUST BE USED whe n they appear in the list,
and AFTER the number as in the list.
In this series
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to 60000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs BJe made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 101-1
FOR FAMILY USE. THE ARM AND BED 1$ ONE CASTING, THE BED
IS COVERED WITH A DETACHABLE CLOTH PLATE, THE BOTTOM
MECHANISM IS ENTIRELY ENCLOSED. THE HOOK TRAVELS IN
A HORIZONTAL PLANE OPERATED BY THREE SETS OF GEARS
AT A RATIO OF TWO TO ONE. THE MACHINE IS DRIVEN BY
AN ELECTRIC MOTOR LOCATED IN THE ARM OF THE MACHINE
NEAR THE BALANCE WHEEL ON THE SIDE OPPOSITE THE
OPERATOR.
NO.
TLATK
*()()501
61)502
66,50;i saoi
66501
6650.5
66506
66507
66508
M5d
66.500
•H6c
66510
50554c 8808
66511
701c
t)0()42
66614
66615
66616
66617
—
Arm, u[)per and lower (solid) with 66506,
s:ioi
8:i02
h:«i2
8802
8801
8801
8808
8801
8808
8801
8802
8802
8302
8802
8802
8802
8802
66517 and 6651H.............................................
Arm Lower (lover (back).....................................
“ “ “ (front)........................................................
“ “ Plug (large)..................................................
“ “ “ (small).......................................................
“ Oil Tube
“ Shaft (horizontal)
“ “ “ Bushing (back) and
Bobbin Winder Bracket (belt cover). . .
.\mi Shaft (horizontal) Bushing (back)
Screw..........................................................
.Arm .Shaft (horizontal) Bushing (front) . .
“ “ “ “ “ Set
Screw...............................................................
Ann Shaft (horizontal) Bushing (inter-
mediate)...........................................................
.Arm .Shaft (horizontal) Bushing (inter-
mediate) Set Screw
.Ann Shaft (horizontal) Clamp Stop Mo-
tion Collar with two 791c
Arm Shaft (horizontal) Clamp Stop Mo-
tion ((ollar Set Screw.......................................
Ann Shaft (horizontal) Gear witli two
1259c...............................................................
Arm Shaft (horizontal) Gear for 190540. . .
“ “ “ “ Clutch.....................................................
“ “ “ “ “ Spring
“ “ “ “ Collar with
two 457c
NAME EACH
.........................................................
...........................................
..........................................
................................
..........................................................
$ —
25
30
10
10
06
3 00
1 80
06
35
05
1 20
07
60
06
1 10
3 60
06
03
35
8 TARTH FOR MAOHiXF Xo. ]01-]
PAUd'S FOR MACHINE No. 101-1 9
NO. I'LATK .VA.MK EACH
“157c SliO'i Ann Sluift (lionzoiitiil) (lour (’oliar Set
Screw.............................................................. 02
12r)9(,' 81102 Arm Shaft (horizon! al) ( !ear Set Screw.. , 05
coti,59
---------
“ “ “ “ W.asher
GOG 13 SilOl “ “ (upright)
..............................................
.............
02
1 20
G(),514 8301 “ “ “ Bushing (lower)... . 40
448c 8308 “ “ “ “ “Set
Screw..................................................................... 05
CG515 8301 Arm Shaft (ui)i ight) Bushing (upper)... . 55
448c 8308 “ “ “ “ “ Set
Screw..................................................................... 05
CGG44 8302 .Arm Shaft (upright) (¡ear (lower) with
two 1250c........................................................... 1 10
12.59c 8302 Arm Shaft (upright) dear (lower) Set
Screw..................................................................... 05
G(iG44 8302 .Ann Shaft (u])iighl) (¡ear (up|>er) with
two 1259c............................................................ I 10
12.59c 83t)2 Arm Shaft (upright) (¡ear (upper) Set
Sei'ew
GGt)35 8302 .Arm Shaft (upr ight ) 1 lo'e Plug
....................................................................
..............
05
Oti
()().517 8302 “ “ “ ( til 'I'uhe (lower)... . 00
GG518 8302 “ “ “ " “ (upper)... OG
(i(it!.5C ,8302 “ Spool Pin ....................................................... 07
<8,879 8302 “ “ “ Washer (eloth)
GG(i37 ,8301 Balancir Wheel witli tuo 448c
...................
01
................................
1 5t)
448c 83!I8 “ “ Set Sen-w..................................... 05
I752i> 83t)2 (’lamp Stop Mot ion ('lanij)ing Nut
...................
tit)
21.Sa 8302 “ “ “ “ “ St oil
Screw..................................................................... 02
Gt),520 ,8302 (’lamp Stop Motion ('lamping Nut
Washer................................................................... 10
GG52I 8301 (’lamp Stop Motion Flairgral Bushing... 3 GO
00.522 ,8300 Cloth Plate................................................................ 2 40
GG523
-----
Cloth Plate eoniplele, Norf. GG522 ami
00525.............................................................. 3 00
091A ,8308 Cloth Plate Screw
0G.524
-----
“ " Slide
...................................................
.....................................................
00
40
GG525 8.303 Cloth Plate Slide eoniplele, ,\'os. 00521,
GG.52G and two ,50170.1..................................... 00
G0.52G 8303 Cloth Plate .Slide Spring.......................................... 10
,50470.1 ,8308 “ “ “ Screw
(iO.527 ,8,303 Face Plate with 2827
219a 8308 “ “ Screw (lower)
I07n 8.308 “ “ " (upper)
2827 .8302 “ “ Thread (luard with 8.505
.....................................
.............................................
......................................
..........................................
.................
02
<80
02
05
02
8.50,5 ,8302 “ “ “ “ Rivet, .per 100 20
00528 83t)3 Feral Bar wit h 00.532
.......................................
70
NO. 1T,ATE NAME EACH
00529 8304 l'’ec<l Bar Centre..................................................... $ 10
4.57c 8302 “ “ “ Set Screw
..........................
02
00,530 8304 “ “ Spring...................................................... 03
00531 8304 “ “ “ Hook (lower)
00.532 8303 “ “ “ “ (upper)
..........................
..........................
02
02
00533 8304 “ dam and Feed Lifting Eccentric with
two 12.53c
.......................................................
90
12.53c 8301 P'ced dam and Feed Lifting Eccentric
Set Screw................................................................ 05
00534 8304 Feed Dog
109If 8308 “ “ Screw
00535 8304 “ Lifting Rock Shaft
00530 8304 “ “ “ “ Bushing
...................................................
............................
........................... 05
...........................................
............
90
30
35
435c 8304 “ “ “ “ “ Set
Screw
......................................................................
06
00537 8304 Feed Lifting Rock Shaft Crank (back)
with 1057e
..............................................................
90
I057e 8308 Feed (lifting flock Shaft Crank (back)
Clamping Screw...................................................... 06
00538 8304 Feed Lifting Rock Shaft Crank (back)
(’onnection.............................................................. 60
tit'ioiiO
--------
J'’eed Lifting Rpek Shaft (¡rank (front) 90
6t>.540 <8301
06539 with 12,59c, 504.59c, 51822 ami
60531
...............................................................
1 30
51822 8:i04 Feed Lifting Rock Shaft (.¡rank (front)
Roller...................................................................... 30
501.59(' 8301 Feed Lifting Rock Shaft (¡rank (front) '
Roller Screw Stud
..................................................
05
1259c 8302 Feed Lifting Rock Shaft (’rank (front)
Set Screw
................................................................
05
00541 8303 Feed Regulating Shaft with two ,50150c .. . 90
00542 8301 “ “ “ Centi-e (long)
00543 831)4 “ “ “ “ (short)
.................
................
25
25
435c 8304 “ “ “ “ Set Screw. . 00
()(i.544 8301 “ “ “ Connecting Link, . 60
00.545 8304 “ “ “ “ “ Pin 00
50l.5()c 8308 “ “ “ “ “ “
Set Screw
00540 ,8304 Feed Regulating Shaft Stud
................................................................
....................
10
02
50150c 8308 “ “ “ “ Set Screw... 02
00,547 ,830,5 “ “ Stud
................................................
1 20
00,548 8305 “ “ “ Head with 56033, . 60
18)11 8.'i0.5 “ “ “ “ Cap Screw... 06
56033 8305 “ “ “ “ Sto]) Pin
..........................................................
per 100 20
00549 8305 Feed Regulating Stud Lock Pin.................................. 00
10
NO. NAMK
56035
66550
21 2d 8305
66551
51823
ItiOc
200c
66552
66553
-i.'ioC
6.533
460c
66554
66512
418c
66542
43,5o
(Kioof)
66556
p.\KTS
8305 Feed Regulating Stud Lock Pin Spring.. .
8305
FOR, MACHINE No. 101-1
U
“ “ Spring
“ “ “ Screw......................................... 06
8305 “ Regulator with 200c
8305
8305
8305
“
“ Roller and Stud ..............................
“
“ “ “ “ S(d Screw
“ Set Screw........................................
8305 “ Shaft
8305
8304
8305
8305
“ “ Hushhig
“ “ “ Set Screw
“ “ Collar with 460c. . .
“ “ “ Set Screw... 02
8303 “ Rock Shaft with two 457c
8304
8308
8304
8304
8305
8305 Feed Rock Shaft Connection Hinge Pin . . .
8302
“
“ “ Centre (left)
“
“ “ “ “ Set Screw 05
“ “ “ (right)..............................................
“ “ “ “ Set Sca'evv
“ “ ('onnection with 457c
460c........................................................
ami
U
)Scr(‘\V.......................................'
()tir)57 8306 .\ec(li(
OiiooS 8306
1133e 8306
tiii(),'j7 8306
930e
8306
8306
1 I3(1e
66559
8306
l.•i.5:ic
8306
8306
1131c 8306
1036c
8306
21.360 S:i01)
66639 8306
ti()5ii
8306
66561
8306
2054 8306
552c
32519
8306
8306 Stoj) Pin
—
8307
^ Bar with 32519
“ Bushing
“ “ Set Screw........................................ (12
‘‘
“ Coimeeting Link with 930e .
a
“ “ “ A (1 j ii .s t i 11
w......................................
SfT(‘
.\eedl,
■ Bar ('otineel lug Link ('a|> Screw . .
“ “ Stud with 1353c.. . 35
“
“ “ “ Set S<'rew. . 06
“ Crank wit h 1134c amt t wo 1036c 90
“ Position S(T(AV
“ “ Set Screw........................................ 05
“
“ Hole Plug
“
“ Thread Guard
ii
“ “ “ Screw............................................ 02
“
“ 'riming Gauge
“
Clamp with 552c...................................
“ 'rhumb Screw.................................
Oil lie
sorvoir.................................................
" “ Oil'I'ube for oiling 51823
and 66535...................................................
SÜ07 ()il Hcservoii' Oil 'l'uhe for oiliofi
mill (i()578
.....................................................
,S.'i07 ()il Kc.servoii' Oil 'Pulie for oiling Uli.SH? 03
..........................................
......................................
...............................................
........................................
.............................
......................................
.................................
.....................................
............................................
.......................
.........................................
...................................
...................................
................................................
118
EACH
$ 02
00
1 50
50
02
05
25
70
06
35
90
25
25
06
80
02
90
1 20
60
06
10
20
(12
01
35
20
01
70
03
PARTS l'^OR MACHINK No. 101-1 11
NO. PLATE NAME EACH
1)0032 8307 Oil Reservoir Oil Tube for oiling 66554 $ 06
00033 8307 “ “ « “ “ 06554
and 66556......................................................... 06
00034 8303 Oil Reservoir complete, Nos. 66562, 66563,
66631, 66632 and two each 66629, 66630
and 66633........................................................... 2 30
50460e 8308 Oil Reservoir Screw................................................... 10
60.503 8303 " “ Wick
8366 8303 Presser Rar
.................................................
.....................................................
02
50
32535 8305 “ “ Guide Bracket with 400k and
453o......................................................................... 55
100k 8305 Presser Bar Guide Bracket Adjusting
Screw....................................................................... 02
453c 8305 Presser Bar Guide Bracket Set Screw. ... 02
00504 8305 “ “ Lifter
85u 8305 “ “ “ Screw
3100 8303 “ “ Spring
2070 8305 “ “ “ Washer
........................................
..............................
......................................
............................
30
07
07
01
00505 8304 “ Foot Hinge Pin.......................................... 02
U)
00500
66507
-----
-------------
“ “ Plate
..............................................
95
“ “ Shank.............................................. 90
66508 8304 Presser Foot (hinged) complete, Nos.
00505 to 66567................................................. 1 80
281)1) 8308 Presser Foot 4'hiimb Screw.....................................• 20
50023u 8308 Pressvire Regulating Thvimb Screw.......................... 30
66569 8307 ifotating Hook
66570
------
“ “ 66569 with 234f, 66584,
66571 - — Rotating Hook 1)6570 with 66573
..............................................................
66588 and two 50'51u
......................................
................................
3 60
'5 90
10 70
32522 8307 “ “ Bobbin......................................... 07
66572 8307 “ “ “ Case
66573
------
Rotating Hook Robbin Case complete.
...............................
3 60
Nos. 591i.-, 1173n, 50461c, 50462c, 66572,
66574, 66575 and 66577
66574 8307 Rotating Hook Bobbin Case Finger
..................................
......
4 80
91)
nOitiic 8307 “ “ “ “ “ Hinge
Screw................................................................ 06
06
66575 8307 Rotating Hook Bobbin Case Finger Spring 03
50462c 8307 “ “ “ “ “ “
Screw....................................................................... 06
66570 8307 Rotating Hook Bobbin Case Position Plate 90
217n 8307
Screw....................................................................... 05
591 !■’ 8307 Rotat Ing Hook Bobbin (laseTension Regu
lating Screw............................................................. 02
66577 8307 Holaling Hook Bobbin Case Tension
Spring....................................................................... 20
12
PAKTS POK MACIllNK No. lOl-l
PARTS FOR MACHINE No. 101-1
13
NO. PLATE NAME EACH
1173DSIi07 Rotating tlook Hobliin ('as(! Tension
()()578 SliOli Holating llook Driving Shal't..................................... 1 50
00579 S;i0.'! “ “ “ “ liüslung
■110c 8308 Rotating Hook Driving Sliaft Husliing
00580 8303 Rotating Hook Driving Sliaft Bnsliing
-135c 830-1 liotating llook Driving Sliaft Bushing
00581 8307 Rotating llook Driving Shaft Collar with
50150c 8308 Rotating llook Driving Shaft Collar Set
00014 8302 Rotating llook Driving Shaft Clear (hack)
T259c 8302 Rotating Hook Driving Shalt Clear (back)
00582 83(13 Rotating Hook Driving Shaft (tear (front)
1259c 8302 Rotating Hook Driving ShafI Clear (front)
00583 8307 Rotating Hook Position Pin....................................... 01
50I03E 8307 “ “ Screw
00581 8307 “ “ Section
50151 n 8307 “ “ “ Screw
00585 ,8307 “ “ Shaft with 00583
00580 8307 “ “ “ Bushing
110c 8308 “ “ “ “ Set Screw 05
00587 .8307 “ “ " Clear with two 1253c 95
1253c 8301 “ “ “ “ Set Screw
00588 8307 “ “ 'rhi'cad Cluard............................ 10
23 lE 8307 “ “ “ “ Screw
00589 8307 Slack'I'lnead Regnlator
219» 8308 ‘‘ “ “ Screw
2102 .8308 I'ension Disi;
15001) 8308 “ Regulating'I’hnnib N'nt
32572 8308 “ Heleasing Disc......................................... 07
32573 8308 “ “ Lever........................................ 00
97e 8308 “ “ “ Hinge Screw. .. 00
12329 8308 “ “ “ Spring
500.57 8308 ' “ “ Pin
8238 8308 “ Spring.......................................................... 07
l-tOc'silOS “ “ Set Screw....................................... 05
20075 8308 I’liread C'idler and Holder
Spi-ing Serevv
(l)aek).................................................................... 55
(l>ack) Set Screw.................................................. 05
(front)
(front) Set Screw................................................... 06
two 50150c............................................................ 25
Screw..................................................................... 02
with two 1259c.................................................. I 10
Set Screw............................................................... 05
with two 1259c................................................. 1 20
Set Screw............................................................... 05
................................................
..................................................................
............................................
....................................
............................
.................
.................................
..............................................
.............................
............................................................
..............................
.........................
.............................................
....................................
............
..........
S 02
2 10
1 50
05
02
02
05
‘10
10
02
10
35
07
00
02
07
NO. PLATE NAME EACH
8422 8308 Thread Guard (head of arm)
60590 8300 “ Take-up Crank
1030c 8300 “ “ “ Set Screw
00591 8300 “ “ Lever.............................. 00
32,513 8300 “ “ “ Hinge Stud
00592 8300 “ “ “ Link
00.593 8300 “ “ “ “ Hinge Pin.... 00
117c 8300 “ “ “ “ “ “ Set
Screw
....................................................................
00594
---------
Thread Take-up Lever complete, Nos.
32,543, 60591 and 66592
50060 8308 Thread Take-up Spring
00.595
00590 0308 “ “ “ “ 66595 with
50003 8308 Thread Take-up Sjiring Disc Steady Pin 02
50001 8308 “ “ “ Thread Guard.. . 07
00.597 8304 ’ Throat Plate for 66534
------------
091a 8308 “ “ Screw...................................................... 00
“ ■“ “ Disc
50003
......................................................................
........................................
.............................................
............
05
.................
.....................
................................
............................................
....................
.............................................
00
10
S 01
1 15
07
05
1 20
05
20
90
SINGER ENCLOSED MOTORS
CAT. NO. PLATE DESCRIPTION
S.K. .507 ------- 100 to 110 volts. Direct Current and GO
cycles. Alternating Current..................................... —
S.K. 508
S.K. .510
S.K. 512
S.K. ,513
-------
115 to 125 volts, Direct Current and 60
cycles, Alternating Current..............................*' —
-------
200 to 220 volts, Direct Current and 00
cycles, Alternating Current
-------
230 to 250 volts. Direct Current and 00
cycles. Alternating Current..................................... —
----------
32 volts. Direct Current
....................................
..............................................
—
—
MOTOR PARTS
NO. PLATE NAME EACH
190009 8320 Armature complete for S. E. 507 Motor. . $8 00
190070
190072 ■-
------
“ “ “ S. E. 508 Motor. . 8 00
----
“ “ “ S. E. 510 and S.K.
512 Motors...................................................... 8 00
u
190735
190537
440c
190535
190530
440c
100540
50150c
190782
190008
458c
190083
i;)0079
50555c
190079
190004
1 <10541
190539
190501
190503
190507
190511
190737
190500
P.K)502
190500
190510
190730
190014
190479
501091
19IM)03
190080
190538
190722
PJ0723
190015
190010
50520
P,)0553
190552
—
8310
8308
8310
8310
8308
8310
8308
8321
8321
8321
8321
8321
8321
—
8320
830'.)
8310
8309
—
—
—
—
8309
—
—
—
—
8310
8309
0 8310
8320
—
8310
047n 8310
8320
8320
8321
8321
8317
8317
8317
MO'I’OU PAirrS
NAME EACH
Armature complete furS. I'l. Sili Motor. . |8 00
“ Shaft Bearing Sleeve (hack)... 40
“ “ “ “ “ Set
Screw........................................................ 05
Armature SliafI Bearing Sletwe (front)... 40
“ “ “ “ “ I’lng 10
“ “ “ “ “ Set
Screw........................................................... 05
Armature Shaft (fear with two 50150c. . . 1 00
“ “ “ Set Screw
Brunii (cai'bon)
...............................................
“ Holder Insulating Bushing
........................
...........................
02
14
20
“ “ “ “ Set Screw 02
“ “ Spring
...............................................
00
“ “ Tube.................................................. 04
“ “ “ (’a() Screw
...........................
05
Brush Holder comiilete, .Vos. 50555c,
190079, 1900S:i, 19001)8 and 190782.... 45
Cominutator........................................................ 2 00
(’over.............................................................. 50
“ I’in........................................................... 03
Field Coil (lower) for S. K. 507 Motor. . . 90
“ “ “ *■ S. K. 508 Motor. . . 90
“ “ “ ■' S. It. 510 Motor. . . ilO
“ “ “ “ S. It. 512 Motor. . . 90
“ “ “ “ S. It. 513 Motor. . . 90
“ “ (upjM'r) for S. It. 507 Motor. . . 90
“ “ “ “ S. It. 508 Motor. . . 90
“ “ “ ■■ S. It. 510 Motor. . . 90
“ “ “ “ S. It. 512 Motor. . . 90
“ “ “ “ S. It. 513 Motor. . . 90
“ “ Ketainer
“ Core.................................................................. 2 50
“ “ Screw
Frame...................................................................... 2 50
Frame complete, No.s. 457c, 190535 to
190537, 190()()3 and two each 440c, 458c,
I!)05;i8 and li)0539............................................ li 00
Frame Oil Well Plug
“ Screw................................................................. 05
Lead Wire with 190058........................................ 50
“ “ “ 190059........................................ 50
“ “ Plug Insert for 190059
“ “ “ “ “ 190058
“ “ “ “ Screw
“ “ “ “ “ Washer. ... 03
“ “ “ Ferrule
..................................................
......................................................
............................................
.......................
..........................
...............................
........................................
03
20
05
20
20
06
'20
NO.
100484
1<)0058
190059
190657
190544
190543
190720
190545
457c.8302
190530
190531
190533
190532
li)052i)
190000
50520
NO.
30509
30570
30571
30807 8310
190439
190012
190013
NO.
30594
32522
25527n
287 u
6(»t)2S
35931
—
*00045
8505
*00047
MO'POR PAIM’S
: NAME
8317
Lead Wire Plug Insulation Washer
8320
Lead Wire Plug (male half) Nos. 50520,
190484, 190552, PJ0553 and 190616.. . .
8320
Lead Wire Plug (female half) Nos. 50520,
190484, 190552, 190553 and 190615.. . .
—
-----
Lead W'ire Plug, 5 amp., complete, Nos.
100658 and 190659. . .
8309
liCad Wire Tube (circular loom).
8309
8309
8309
8310
8310
— -
8310
—
8321
8317
“ “ “ 190544 with 190545 and
190720
................
Lead Wire Tube Ferrule (lower)
“ “ (upper).....................................
** *' “ “ “ Set Screw'
Oil Cup Hodv
•• “ Wick
“ “ “ 190531 with 190532... .
“ “ “ Spring
(Id Cup complete, Nos. 190530 and 190533
I’erininal complete
............
................................
.......................................
................
“ Jumper Plate Screw (brass)
ACCESSORIES
PLATE
8311
Oiler with 36571
—
8311
8311
—
—
“ 36569, filled with oil
“ Spout, 1% in. long, with 36807-.
Tube filled with Singer Motor Lubricant.
“ Carton (paper)
“ PJ0439 with 190612
NAME
..............
.................
“ Washer (leather)....
...................
ATTACHMENT SET
PLATE
8312
Binder
8307
5035
5035
8311
8312
—
—
8312
8302
—
...........
Hobbins (five) .
Cloth Cuide
“ “ Thumbscrew
l'’eetl Cover Plate. .
Heinmer (adjustable)..................
Neeilles (six)
Stripper Foot with 8505,. .
“ “ Sprine
Needle Cliunp with 66648 . .
NAME
...............
.............................
.............
.........................
** “ Rivet
..........................
___________
per 100
EACH
$ 02
■ 50
1 00
EACH
$ 07
"^Ol
EACH
% «0
07
20
20
10
1 50
_
60
06
20
35
15
50
10
20
08
08
02
04
03
08
03
12
50
06
10
01
25
05
25
Loading...