Sinclair RM02 User Manual

FULL DC INVERTER SYSTEMS

USER MANUAL

REMOTE CONTROLLER RM02

C O M M E R C I A L A I R C O N D I T I O N E R S S D V 4

Original instructions

IMPORTANT NOTE:
Read this manual carefully before installing or operating
your new air conditioning unit. Make sure to save this
manual for future reference.

The outline figure on cover is for reference only, which may differ
from what you purchased.

Make sure to read chapter PRECAUTIONS before you operate
the air conditioner.

The controller can be applicable for cool&heat type air condition­ers.

●

●

●

I. Safety precautions

The following contents are stated on the product and the operation

manual, including usage, precautions against personal harm and

property loss, and the methods of using the product correctly and safely.

After fully understanding the following contents (identifiers and icons),

read the text body and observe the following rules.



Identifier description

Identifier Meaning

Means improper handling may lead to

personal death or severe injury.

Means improper handling may lead to

personal injury or property loss.

[Note]: 1. “Harm” means injury, burn and electric shock which need
long-term treatment but need no hospitalization

2. “Property loss” means loss of properties and materials.

W

arning

arning

Caution

Caution



Icon description

Meaning lcon

It indicates forbidding. The forbidden subject-matter is
indicated in the icon or by images or characters aside.

It indicates compulsory implementation. The compulsory
subject-matter is indicated in the icon or by images or
characters aside.

1

Warning

W

arning

arning

Please entrust the distributor or professionals to install

the unit. The installers must have the relevant know-how.

Improper installation performed by the user without perm

ission may cause fire, electric,shock, personal injury or w

ater leakage.

Delegate

installation

Forbid

Forbid

Usage

Usage

W

arning

arning

Do not spray flammable aerosol to the wire

controller directly. Otherwise, fire may occur.

Do not operate with wet hands or let water enter the wire

controller. Otherwise, electric shock may occur.

2

3

II. Model And Specification

Rated voltage

Effective receiving distance

Operation condition

3.0V(2 pieces of LR03 7# batteries)

2.0V

8m(Where is 3.0V,that will be 11m)

-5~60°C

Min voltage for sending
signal of CPU

4

III. Buttons And Their Functions

Fig.3-1

ECONOMIC
OPERATION

ON/OFF

ADJUST

TIMER

26°C

MODE

FAN

SPEED

HORIZ SWING

VERT SWING

Remote signal
emission terminal

STRONG

DISPLAY

DRY·AUXILIARY HEAT
丨FOLLOW ME

ON OFF

MODE

FAN

SPEED

TURBO

LED DISPLAY

TEMP

SET

TIMER

ECO

DRY E

•A•H

FOLLOW ME

FAN DIRECTION

AUTO
COOL
DRY

HEAT
FAN

TIMER OFF

TIMER ON

FOLLOW ME

TEMP

FAN SPEED

FAN SPEED

FOLLOW ME

FOLLOW ME

SLEEP
MODE

1

2

4

5

7

9

3

6

8

10

12

11

5

② 26°C: Press this button, can operate

the cool mode with the setting

temperature 26°C.

④ TIMER：

① ON/OFF: For turning on or turning off

the air conditioner.

DRY

HEAT FAN

→ → → →

AUTO

COOL

③ MODE: Once pressing, running mode

will be selected in the following sequence:

Under the OFF state, press this button,

TIMER ON are ligtened. continue to

press TIMER button, the time will

increase by 0.5 hour. When the set time

exceeds 10 hours, pressing TIMER

button will increase the time by 1

hour.Adjust the TIMER ON to be “0:00”

then can cancel the TIMER ON.

Under the ON state, press this button,

TIMER OFF are ligtened. and continue

to press TIMER button, the time will

increase by 0.5 hour. When the set time

exceeds 10 hours, pressing TIMER

button will increase the time by 1

hour.Adjust the TIMER OFF to be “0:00”

then can cancel the TIMER OFF.

:Decrease the set temp.

Keeping pressing will decrease the temp
with 1℃per 0.5s.

⑦ HORIZ SWING: Activate or turn off wind

horizontal swing function. (Only available

when remote controller is used with

corresponding unit.)

ADJUST :

⑥ ADJUST

⑤ ECO: Activate or turn off economic

operation mode.

Increase the set temp.

Keeping pressing will increase the temp
with 1℃ per 0.5s.

AUTO → LOW → MED → HIGH

⑧ FAN SPEED:

Fan speed will be selected in following

sequence once pressing this button:

(Under the DRY and AUTO mode

(except for the auto heat recycling

mode), the fan speed will be fixed and

can not be adjusted. Under the auto

heat recycling mode, the fan speed will

be automatically and can be adjusted.)

6

⑨ VERT SWING: Activate or turn off

wind vertical swing function. Under the

power off state, this button will not work.

(Only available when remote controller

is used with corresponding unit.)

⑩ STRONG：

Press this button, set the air

conditioner to operate as strong mode,

and the frequency will be raised, press

again will cancel this mode. (Only

available when remote controller is

used with corresponding unit.)
DRY·AUXILIARY HEAT丨FOLLOW ME：

Press the left of the button when it is

operating the dry cleaning function,

will close the dry cleaning function;

press the right of the button when it is

operating follow me function, will close

the follow me function.(Only available

when remote controller is used with

corresponding unit.)

11

12

DISPLAY：

When the air conditioner is on the ON

state, press this button, can close

(open) the modules display, press again

will open (close) the display. (Only

available when remote controller is

used with corresponding unit.)

7

IV. Names Of Indicators And Their Functions

AUTO
COOL
DRY

HEAT
FAN

TIMER OFF

TIMER ON

FOLLOW ME

TEMP

FAN SPEED

FAN SPEED

FOLLOW ME

FOLLOW ME

SLEEP
MODE

ON/OFF

③

Lock

⑥

Timer ON/OFF

⑤

①

Running

mode

④

Temperature

⑦

Fan speed

⑧

Transmitting

display

Follow Me

②

① Transmitting display: The icon will

flash once when the signal is sent by

remote controller.
② ON/FF: Icon is displayed when the

remote controller is turned on, or vice

versa.
③ Running mode: Press MODE to

display current running mode. AUTO,

COOL, DRY, HEAT and FAN can be

selected.
④ Timing ON/OFF：When adjusting

timing ON state or only the timing ON

Fig.4-1

function has been set, the “Timing ON”

will be displayed; when adjusting timing

OFF state or only the timing OFF function

has been set, the “Timing OFF” will be

displayed.
⑤ Lock：Press MODE and TIMER

button for 5s simultaneously, lock icon will

be displayed;Press buttons again,the

icon disappears.
⑥ Temperature：Display the set

temperature. Adjust temperature via “

, ”. No display in this area if the area if

8

the unit is on FAN mode.
⑦ Follow Me: Under the cool, heat, auto

mode operation state, press the right of
“DRY E•A•H丨FOLLOW ME” button, the

follow me icon will be displayed, and

press again the icon will be disappeared.
⑧ Fan speed：Press FAN SPEED to

display the current wind speed. AUTO,

LOW, MED and HIGH can be selected.

The default state is high fan speed for

the unit without medium fan speed.

CAUTION

All the above icons are listed for

instruction, and the relative items will

be dispalyed when operation. And all

the icons will be displayed when the

remote controller is electrified for the

first time or reset.

V. Operation Instructions

● Install and Replace Batteries

1. Install 2 pieces of 7# alkaline batteries.

2. Slide the cover to install batteries and

make sure to place them in right pole.

● Auto Operation (Normal)

AUTO operation

AUTO

FAN SPEED

FAN SPEED

Lighting

Running

Lighting

TEMP

SET

MODE

ON/OFF

Fig.5-1

1.Press MODE to select AUTO.

2.Adjust temp via and . Generally
the range is 17℃~30℃ .

3.Press ON/OFF and running indicator

light on indoor unit is lightened. Air

9

● Dry/fan/cool/heat Operation

DRY/FAN/COOL/HEAT OPERATION

Press MODE to select COOL, DRY,

HEAT or FAN.

Adjust temp via and . Generally
the range is 17℃~30℃ .

Press FAN SPEED to select AUTO,

1.

2.

3.

LOW, MED or HIGH.

Press ON/OFF and running indicator

light on indoor unit is lightened. Air

conditioner will work on the set mode.

Stop operation via ON/OFF.

4.

conditioner will work on AUTO mode and

fan speed is AUTO, the display screen

on remote controller will display “AUTO”,

then the fan speed is adjustable. And

press ON/OFF again, the air conditioner

will be stopped.

FAN SPEED

FAN SPEED

Lighting

Running

Lighting

DRY

FAN SPEED

FAN SPEED

Lighting

Running

Lighting

FAN

FAN SPEED

FAN SPEED

Lighting

Running

Lighting

COOL

HEAT

TEMP

SET

MODE

FAN
SPEED

ON/OFF

4

DRY

FAN

COOL

HEAT

FAN SPEED

FAN SPEED

Lighting

Lighting

Running

Electric heating

Fig.5-2

10

CAUTION

“FAN” operation can not set the

temperature, when select this operation

only can do 1,3,4 steps.

“DRY” operation can not set the fan

speed, when selsect this operation only

can do 1,2,4 steps.

● Other Functions Operation

1. Dry function

DRY

Lighting

DRY E

•A•H

FOLLOW ME

Function instruction:

This air conditioner has

dry function,close the

unit under the cool

and dry mode, the air

conditioner will operate

the dry function automatically, then

the icon will be lightened. For cool-only

model, the air conditioner will Low

operate with fan mode for 10 mins and

then close the unit automatically.

Stop operation:

If you want to stop the dry function,
can presss the left of “DRY E•A•H丨

FOLLOW ME” under the function is

operating, then can stop the function,

and the icon will be off.

Fig.5-3

2. Follow me function

Function instruction:

This air conditioner

has follow me

function, when this function

is operated, the remote controller will

detect the temperature near the

remote controller and compare with the

temperature you set atuomatically, and

controll the operation of the air

conditioner according to the contrastive

result, and make the temperature near

the remote controller reaches the

setting temperature. This function is

valid only under COOL, HEAT, AUTO

mode and the unit has follow me

function.The remote controller can not

be placed near the heat source or low

DRY E

•A•H

FOLLOW ME

Fig.5-4

11

temperatue source, otherwise will

affect its temperature gathering

precision and then affect the follow

me function.

Function instruction:

When operating cooling, press

“TURBO” button and operate the

strong cooling operation, at the same

time raise the frequency, press again

will close the strong operation.

This function is invalid under operating

sleep function.

3. Strong operation function

Lighting

Running

Turbo

TURBO

save function; press again will cancel

the function.

Under the DRY/FAN mode, this

function is invalid.

Under power save state, press

“MODE”,”ON/OFF” or “FAN” button

will cancel this function.

4. Energy-saving function

Function instruction:

When operating COOL/AUTO, press

the “ECO” button, and operate power

Fig.5-5

5. Display function

Function instruction:

For avoiding the display light of the

indoor unit will affect customer’s rest,

this unit has special display funtion.

When the air conditioner is operated,

press the “DISPLAY” button, then can

close(open) the module display, press

again can open (close) the display.

Function instruction:

Press “26°C” on the remote

controller can operate the

cooling operationg mode with the

setting temperature of 26°C.

6. 26°C green function

Fig.5-6

12

Function instruction:

Press the “MODE” and “TIMER”button

at the same time and last over 5s,

then can operate locking the remote

controller.

In locked state, all the buttons are

ineffective.

Press the “MODE” and “TIMER”button

again at the same time and last over

2s, then can close the locking.

7. Lock function

8. Auto heat recycling mode function

Example:

ΔT is 1°C, Ts is 25°C.
when Tf-Ts>=＋ΔT, it will operate COOL

mode, the fan speed will be operated

according to the setting fan speed.
when Tf-Ts<=－ΔT, it will operate HEAT

mode, the fan speed will be operated

according to the setting fan speed.

Function instruction:
ΔT:Temperature difference, means the

different temperature between the

indoor temperature (Tf) detected

by the remote controller and the

remote controller setting

temperature (Ts).

(the default difference is 3°C, the

difference range is 1~4°C)

SW1 definition

Auto Mode (Normal)

SW1

SW1

Auto heat recycling Mode

TEMP

SET

press and buttons for 5S
simultaneously, then enter ΔT
setting state.

TEMP

SET

ON/OFF

FAN SPEED

FAN SPEED

ΔT setting state

press or button
adjust ΔT you want

press ON/OFF button
confirm and exit the setting

ΔT instruction

13

Note:

This function operations only available

when the indoor unit is in the heat

recycling three-pipe system.

When the remote controller selects the

auto heat recyclingmode, the remote

controller position must be placed at the

signal receiving range of the air

conditioner.

When the remote controller detects

changes of the mode(cool to heat,or

heat to cool), it will send the changes to

air conditioner.One beep of air

conditioner changed mode signals is

giving out.

CAUTION

5.4 Other functions operations only

available when the indoor unit has

corresponding functions.

● Timer Operation

TIMER

TIMER

Timing Setting

TIMER ON

TIMER ON

FAN SPEED

FAN SPEED

COOL

FAN SPEED

FAN SPEED

COOL

FAN SPEED

FAN SPEED

COOL

TIMER ON

1. Setting timing ON

①. Under the remote controller is OFF,

press the “TIMER” button, then the

remote controller will display the timing

ON icon and number display area will

show up last timing ON time, and will

display icon “h”. The remote controller

enters to the timing ON adjusting state.
②.(Continue) Press “TIMER” button,

then can adjust the timing ON time to

what you want.
③.After adjustment, the remote controller

transmit the timing ON signal, and after

5s the icon “h” will be disappeared, and

Fig.5-7

14

the number display area will back to

display temperature, then finish the

timing ON setting.

③.After adjustment, the remote controller

transmit the timing OFF signal, and after

5s the icon “h” will be disappeared, and

the number display area will back to

display temperature, then finish the

timing OFF setting.

①.Under the remote controller is ON,

press the “TIMER” button, then the

remote controller will display the timing

OFF icon and number display area will

show up last timing OFF time, and will

display icon “h”. The remote controller

enters to the timing OFF adjusting state.
②.(Continue) Press “TIMER” button,

then can adjust the timing OFF time to

what you want.

2. Setting timing OFF

TIMER

TIMER

FAN SPEED

FAN SPEED

COOL

FAN SPEED

FAN SPEED

COOL

FAN SPEED

FAN SPEED

COOL

TIMER OFF

TIMER OFF

TIMER OFF

Fig.5-8

◎Check the preset time of timing: press

the corresponding timing button once,

then will display the timing time.
◎Change the timing ON or OFF time:

press the corresponding timing button,

then reset timing ON or OFF time.
◎Cancel the timing: adjust the timing

ON or OFF time to be 0.

■Timing the time to be relative time, that

relate to the time which later than the

standard time of operating the

remote controller.

■Under the remote controller is ON, only

can set timing OFF; under the remote

controller is OFF, only can set

timing ON.

15

VI. Precautions

● Curtain, door or the like objects will

prevent the remote signal from being

received by air conditioner.

● Do not get the interior of remote

controller wet. It is forbidden to expose

it to direct sunlight or locate it in the

place with high temp.

● Malfunction may occur if infrared

signal receiver on air conditioner is

exposed to sunlight. Please shelter the

signal receiver from sunlight with

curtain.

● Please remove the nearby electronic

device for they may affect the

performance of remote controller.

● Do not put the used or different

batteries into the remote controller,

otherwise remote controller will fail to

send signal.

● Please remove the batteries before

long period unused, otherwise the

remote controller may be damaged.

● If pressing the button reset the

remote controller, which indicates low

battery, please replace the batteries.

● If no receiving sound is heard from

indoor unit or on remote controller

does not flash, please replace the

batteries.

● Effective transmitting distance of

remote controller is 8m, please aim the

signal sending part to the receiver on

air conditioner.

NOTE CONCERNING PROTECTION OF
ENVIRONMENT

This product must not be disposed of via normal household waste after its service life, but must be
taken to a collection station for the recycling of electrical and electronic devices. The symbol on the
product, the operating instructions or the packaging indicate such disposal procedures. The materials
are recyclable in accordance with their respective symbols. By means of re-use, material recycling or
any other form of recycling old appliances you are making an important contribution to the protection
of our environment. Please ask your local council where your nearest disposal station is located.

-

In case of quality problem or other please contact your local supplier or authorized service center.

Emergency number: 112

PRODUCER

SINCLAIR CORPORATION Ltd.
1-4 Argyll St.
London W1F 7LD
Great Britain

www.sinclair-world.com

This product was manufactured in China (Made in China).

REPRESENTATIVE

SINCLAIR EUROPE spol. s r.o.
Purkynova 45
612 00 Brno
Czech Republic

TECHNICAL SUPPORT

NEPA spol. s r.o.
Purkynova 45
612 00 Brno
Czech Republic

Tel.: [phone]
Fax: [phone]

www.sinclair-solutions.com
info@sinclair solutions.com