Simpson Electric 260-9S, 260-9SP Data Sheet
The new 260 Volt-Ohm-Meter is
1
Rev. 03-30-15
suitable for testing most commercial
and industrial installations and
is rated for Category III-600V
applications.
Safety is the major design feature of
the 260-9S/9SP and the reputation,
advantages and reliability of Simpson
test equipment is guaranteed.
260-9S & 260-9SP
Industrial Safety VOM
Control # 3075577
• Certied to EN61010-1 to 600V, Category III for safety
• Self-contained AC current measurement up to 10 Amps
• Overload protection available
• Includes test lead set with retractable banana jacks and carrying case
Ordering Information
ANALOG MULTIMETERS Catalog Number
260-9S, Safety VOM 12397
260-9SP, Safety VOM, overload protected 12398
Accessories Catalog Number
Case, Nylon Padded, Safety Orange, 260 00838
Test Lead Set, Retractable Banana, Probe Tip 07546
150-2 AC Clamp Adapter 00541
Clip Set, Alligator, Screw On 00425
260-9S & 260-9SP
2
Rev. 03-30-15
Industrial Safety VOM
Specications
DC Voltage
Ranges Accuracy Sensitivity
250mV, 2.5V, 10V, 25V, 60V, 100V, 250V, 600V 2% of full scale 20KΏ per volt
AC Voltage
Ranges Accuracy Sensitivity
2.5V, 10V, 25V, 60V, 100V, 250V, 600V 3% of full scale 5KΏ per volt
AC Current
Ranges Accuracy Sensitivity
0-10 3% of full scale 250mV
Ranges: Up to 250 amperes with AC Amp-Clamp Adapter Accessory # 00541
Decibel
Ranges
Reference
-20 to +43dB
0dB = 1mW into 600Ώ
DC Current
Ranges Accuracy Voltage Drop: (Nominal)
1mA, 10mA, 100mA, 600mA, 10A ±2% of full scale 250mV
Resistance
Maxium
Ranges Accuracy
Rx1 Better than ±2.5° of arc 0 - 2KΏ
Rx100 ± 2.0° of arc 0 - 200KΏ
Rx10K ± 2.0° of arc 0 - 200MΏ
Batteries 1.5V D, 9V (Neda No.13F, 1604A)
Fuse F1 1A, 250V, type 3AG, quick acting Littlefuse® Type 312001;
F2 2A, 600V Littlefuse® Type BLS or 2A, 600V, Bussman® Type BBS
Dimensions 7" (H) x 5.25" (W) x 3.1" (D), (17.78 x 13.34 x 7.94cm)
Weight 2.25 lbs. (1.02 Kg)
Indication
Specications subject to change without notice.
Loading...