SimplyShade SSBU-5X7RT5T, Lanai, SSUM81-09, SSUM81-11 Instruction Manual

4.95’ x 6.93’ Rectangle / SSBU-5X7RT5T

I n s t r u c t i o n M a n u a l

Capri

Balcony Umbrella

A - Canopy E- Middle Strut I - Bottom Pole
B - Stopper Rings F - Joint Knob J - Base (sold separately)
C - Slider Car G- Top Pole K - Protective Cover
D - Strut H- Bottom Pole Knob (not shown)

CAPRI CHECKLIST

- A

Thank you for your purchase of SimplyShade’s Capri Balcony Umbrella.

Please remove all contents from the package, inspect and review checklist.
CAUTION: To reduce personal injury and damage to your umbrella, read and
follow this assembly and operation guide. We recommend a two-person team for
assembly and disassembly. Save information for future reference.

- H

F -

- E

C -

B

D -

- G

- I

- J

WARRANTY:

The manufacturer warrants that this
umbrella, when subject to normal and
proper use, will be free from
manufacturing defects for a period of
one year from the original date of
purchase. Should any defect occur
during the specified time period, the
manufacturer will repair, replace, or
provide replacement parts, at its own
option. Limited warranty against fabric
fading, based on fabric grade. Warranty
is not transferable.

We will not warrant any claim coverage
unless both the original sales receipt and
request form are sent to us. Any items
that are returned for warranty or non
warranty purposes must be issued a
Return Authorization Number. Only

S A F E T Y P R E C A U T I O N S :

• Close and store the umbrella in windy conditions or when a storm approaches.
Never allow the umbrella to flap in the wind; this could damage the canopy.

• Do not leave open umbrella unattended. If damage occurs, this is not covered
by the warranty.

• When adjusting the umbrella, make sure that no person(s) or item(s) are close to
the umbrella. This is important to prevent injury or material damage.

C A R E A N D M A I N T E N A N C E :

• When not in use, close and cover umbrella with a protective cover (not included).

• Allow a wet canopy to dry while in open position.

• If necessary, clean the fabric with lukewarm water, mild detergent, and a sponge.

• Wipe sliding marks on the aluminum poles with a damp cloth.

Winter Storage:

• Store in a dry, protective place.

• Any visible defects must be repaired by a professional.

After the Winter:

• Areas subject to turning and sliding can be treated with a non-staining lubricant
spray (silicone-based).

• Check the condition and function of the umbrella. Any defects must be repaired by
a professional.

S T E P 1 Set Up

Carefully remove umbrella parts from box and lay on a soft clean surface.

Insert reducer into stem of base (sold separately). Insert bottom pole into base stem
(Fig. 1) and tighten base stem knobs to secure umbrella in place. Assemble bottom
pole knob to bottom pole with small locking screw and washer (Fig. 2). Turn bottom
pole knob clockwise to tighten.

From canopy structure, untie middle canopy tie. Assemble top pole to middle strut by
inserting large locking screw into joint mechanism and tighten with washer and joint
knob (Fig. 3).

Lift assembled top pole and insert into bottom pole (Fig. 4). NOTE: Loosen bottom
pole knob by turning counter clockwise if top pole does not easily slide into bottom
pole.

25

(Fig. 2)

(Fig. 3)

(Fig. 4)

Bottom Pole

Bottom

Pole Knob

Top Pole

Joint Knob

Middle Strut

(Fig. 1)