Simply45 Simply45 DO-U001 Manual

5 Commonwealth Ave
Woburn, MA 01801
Phone [phone]
Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

P/N: DO-U001

PATENT PENDING

INSTRUCTION MANUAL

HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

The Dongler™ is not designed to be an invulnerable protection measure. The Dongler is designed to discourage casual theft or inadvertent removal of attached dongles
and adapters. The Dongler™ and GoSimplyConnect™ are trademarks of SIMPLY45 LLC © All rights reserved.

I. Connecting HDMI® Cable to The Dongler

1. Remove The Dongler
packaging.

HDMI
CABLE
HARNESS

After loop is passed over HDMI cable connector,

3.
loosely tighten the wire loop.

™ and all harnesses from

HDMI

2. Connect HDMI cable harness loop over the HDMI
infrastructure cable (not included). Widen loop if
necessary by loosing wire lock.

4.

Tighten hex screw with enclosed tool. The HDMI
cable harness should easily slide over the HDMI
cable. Do not overtighten loop.

HDMI

The loop should not exceed the size of the HDMI
connector strain relief.

HDMI

II. Connecting Dongles/Adapters to The Dongler

The Unloaded Dongler is a truly universal dongle and adapter ring holder. You can attach any brand of dongle
(pigtail adapter) or adapter to your Dongler. Please follow the steps below.

Connecting Dongle Harness to Dongles
(pigtail adapters):

1. Slide harness wire loop over Dongle
connector. Widen loop if necessary.

2. Loosely tighten wire loop. Do not
make wire loop too tight. Loop should
slide along dongle cable.

3. Tighten hex screw with tool.

1

3

2

Adapter Harness to Adapters:

Connecting

Note: Adapter Harness uses an industrial adhesive to permanently attach adapters to the harness. Do not try to
remove after application.

1.

Remove protective film from
sticky pad.

2.

Firmly press sticky pad onto center of
the adapter and hold for 2-3 seconds.

3.

Adapter is now attached to
harness.

III. Combination Lock Guide

Set up the code and lock:

1. Press the opening from the bottom and hold.

2. Set dials to desired combination code.

3. Release the opening.

4. Turn dials to random numbers.
Lock is now set to new combination

1

3

Unlock:

1. Turn the numbers to your lock code.

2. Press the opening.

Code Reset:

1. Repeat "Set up the code and lock" process when it's unlocked.
**The default code is "000"

by

Simply

CONNECT

gosimplyconnect.com

TM

USA Designed
Made in Taiwan
TAA Compliant

2

VI. Package Contents

1

2

3

PATENT PENDING

No Product

THE DONGLER

1

HDMI CABLE HARNESS

2

3

DONGLE HARNESS Wire loop type of harness

ADAPTER HARNESS Sticky pad type of harness

HEX TOOL

5

HEX SCREWS

6

4

5

6

Description

Plastic-coated steel ring connected
to a combination lock

For securely connecting your Dongler
to the device HDMI cable

Wrench to adjust hex screws

Extra set of hex screws

QTY

1

1

3
34
1

2

V. Product Image

Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, MA 01801

PATENT PENDING

PATENT PENDING

TestEquipmentDepot.com