Page 1
S45-3500B/W
Cat5E UTP 180° Keystone Jack 110 Style, Toolless,
w/6 Color ID, 568B Wiring Label, ANSI/TIA 568.2-D,
ISO/IEC 11801 Class D, UL
TERMINATION INSTRUCTIONS
TIA / EIA
T568B
White/Orange
Orange
White/Green
Green
Blue
White/Blue
White/Brown
Brown
White/Green
1
Green
2
White/Orange
3
Orange
6
4
5
7
JACK PIN
DESIGNATIONS
8
TIA / EIA
T568A
1
1.6"
Strip off 1.6 inch of cable jacket.
2
Secure the hinged outlet by closing
the flaps completely.
Insert a cable into the termination cap and
fan out all four twisted pairs.
Following the instruction of the color-coded
wire position printed on the termination cap,
position conductors into the slots and make
sure the conductors are in the proper slot.
Trim the ends of the conductors.
3
Fasten a cable tie wrap to secure
the cable fixture.
4
5
Cable Tie
Cable Fixture
Install the termination cap to outlet, which
will also allocate the conductors sitting on
the slots.
Loading...