Page 1
Owner’s Manual
Installation and Operation
Model(s):
SF-PP23-E
SF-PP26-E
• Important operating
and maintenance
instructions included.
NOTICE
DO NOT DISCARD THIS MANUAL
• Read, understand and follow
these instructions for safe
installation and operation.
• Leave this manual with
party responsible for use
and operation.
DO NOT
DISCARD
Congratulations!
Congratulations on selecting a SimpliFire Electric Fireplace, an elegant and clean alternative to wood & gas burning fi replaces.
The SimpliFire electric fi replace you have selected is designed to provide the utmost in safety, reliability, and effi ciency .
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN
THIS PRODUCT.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE
TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR
PROPERTY DAMAGE.
WARNING: To reduce risk of fi re, electrical shock, or personal injury, read all instructions
before using appliance.
Please contact your SimpliFire dealer or customer/technical support
(877-320-0730) with any questions or concerns.
For the location of your nearest SimpliFire dealer,
please visit www.hearthnhome.com.
Printed in China - Copyright 2013
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
1
Page 2
1
IMPORTANT INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING! Risk of Fire! Risk of Burns!
Risk of Electrical Shock!
DO NOT:
• Install or operate damaged appliance
• Modify appliance
• Operate the appliance without fully assembling all
components
Hearth & Home Technologies Inc. disclaims any
responsibility for, and the warranty and agency listing will
be voided by the above actions.
When using electrical appliances, basic precautions should always be followed to reduce the risk of fi re, electric shock,
and injury to persons, including the following:
WARNING! DO NOT operate fi replace before read-
ing and understanding operating instructions. Failure
to operate fi replace according to operating instructions
could cause fi re or injury.
WARNING! Improper installation, adjustment, alteration, service or maintenance can cause injury or
property damage. Refer to owner’s information manual
provided with this appliance.
NOTICE! This fi replace is not intended for use as a pri-
mary heat source and should not be factored as such in
residential heating calculations.
• Read all instructions before installing this appliance.
• This appliance is hot when in use. T o avoid burns, do not let
bare skin touch hot surfaces. Keep combustible materials
such as furniture, pillows, bedding, papers, clothes, etc. and
curtains at least 3 ft. (0.9 m) from the front of the appliance
and keep them away from the sides and rear
• Extreme caution is necessary when any appliance is used
by or near children or invalids and whenever the appliance
is left operating and unattended.
• Do not operate any appliance if it malfunctions. Disconnect
power at service panel and have appliance inspected by a
reputable electrician before reusing.
• Do not insert or allow foreign objects to enter any ventilaion
or exhaust opening as this may cause an electric shock or
fi re, or damage the appliance.
• T o prevent a possible fi re, do not block appliance connection
fan air intakes or exhaust in any manner.
• A appliance has hot and arcing or sparking parts inside. Do
not use it in areas where gasoline, paint, or fl ammable vapors
or liquids are used or stored.
• Use this appliance only as described in this manual. Any
other use not recommended by the manufacturer may cause
fi re, electric shock, or injury to persons.
• Do not operate any appliance with a damaged cord or plug
or after the appliance malfunctions, has been dropped or
damaged in any manner. Return appliance to authorized
service facility for examination, electrical or mechanical
adjustment or repair.
• Do not use outdoors.
• The appliance is not intended for use in bathrooms, laundry
areas and similar indoor locations. Never locate appliance
where it may fall into a bathtub or water container.
• Do not run cord under carpeting. Do not cover cord with
throw rugs, runners, or the like. Arrange cord away from
traffi c areas and where it will not be tripped over. Do not
tightly coil cord.
• Always use properly grounded, fused and polarized outlets.
• Always use ground fault protection where required by
electrical code.
• To disconnect appliance, turn controls to “OFF” then remove
plug from outlet.
• Always disconnect power before performing any cleaning,
maintenance or relocation of the appliance.
• T o prevent a possible fi re, do not burn wood or other materials
in this appliance.
• To prevent electrical shock or fi re, always use a certifi ed
electrician should new circuits be required.
• When transporting or storing the appliance, keep in a dry
place free from excess vibration and store to avoid damage.
• Avoid use of an extension cord because an extension
cord may overheat and cause a fire. However if you
have to use an extension cord, the cord should be No.
14 AWG minimum size and rated to not less than 1875
watts.
SAVE THESE INSTRUCTIONS
2
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
Page 3
Safety Alert Key:
• WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury.
• CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Table of Contents
1 IMPORTANT INSTRUCTIONS
A. Important Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
B. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2 GENERAL INFORMATION
A. Appliance Certifi cation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
B. Unpacking and Inspecting Appliance . . . . . . . . . . . . . . . . 5
C. Model and Serial Number Information . . . . . . . . . . . . . . 5
3 GETTING STARTED
A. Parts and Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
B. Tools and Supplies Needed . . . . . . . . . . . . . . . . . . . . . . . . 6
C. Appliance and Mantel Dimensions . . . . . . . . . . . . . . . . . . . 6
D. Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
E. Clearance to Combustibles . . . . . . . . . . . . . . . . . . . . . . . . 7
F. Electrical Supply Circuit Requirements . . . . . . . . . . . . . . . 7
G. Electrical Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4 INSTALLATION
A. Installation into Cabinet or Mantle . . . . . . . . . . . . . . . . . . . 8
5 OPERATING INSTRUCTIONS
A. Manual Switch Function: . . . . . . . . . . . . . . . . . . . . . . . . . . 9
B. Operating by Remote Control. . . . . . . . . . . . . . . . . . . . . . 10
C. Resetting Temperature Cutoff Switch . . . . . . . . . . . . . . . . 10
6 MAINTENANCE
A. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
B. Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
C. Servicing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
D. Service Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
3
Page 4
B. Warranty
SimpliFire™ WARRANTY
Hearth & Home Technologies, on behalf of its brand SimpliFire (”SimpliFire”), extends the following warranty
for electric fireplaces that were purchased from a SimpliFire authorized dealer.
WARRANTY COVERAGE:
SimpliFire warrants to the original owner of the SimpliFire fireplace, and to any transferee taking ownership of the SimpliFire fireplace within one year following the date of original purchase, that the SimpliFire fireplace will be free from defects
in materials and workmanship at the time of manufacture. If a SimpliFire fireplace is found to be defective in materials or
workmanship during the applicable warranty period, HHT will, at its option, repair or replace the SimpliFire fireplace.
SimpliFire, at its own discretion, may fully discharge all of its obligations under such warranties by replacing the product
itself or refunding the verified purchase price of the product itself. The maximum amount recoverable under this warranty
is limited to the purchase price of the product. This warranty is subject to conditions, exclusions and limitations as
described below.
WARRANTY PERIOD:
Warranty coverage begins on the date of original purchase. In the case of new home construction, warranty coverage
begins on the date of first occupancy of the dwelling or six months after the sale of the product by an independent,
authorized SimpliFire dealer/ distributor, whichever occurs earlier. The warranty shall commence no later than 24 months
following the date of product shipment from HHT, regardless of the installation or occupancy date.
WARRANTY CONDITIONS:
This warranty only covers SimpliFire fireplaces that are purchased through a SimpliFire authorized dealer or distributor. A
list of SimpliFire authorized dealers is available on the SimpliFire websites.
WARRANTY EXCLUSIONS:
This warranty does not cover the following:
&KDQJHVLQVXUIDFHILQLVKHVDVDUHVXOWRIQRUPDOXVH$VDKHDWLQJDSSOLDQFHVRPHFKDQJHVLQFRORURILQWHULRUDQG
exterior surface finishes may occur. This is not a flaw and is not covered under warranty.
'DPDJHWRSULQWHGSODWHGRUHQDPHOHGVXUIDFHVFDXVHGE\ILQJHUSULQWVDFFLGHQWVPLVXVHVFUDWFKHVPHOWHGLWHPV
or other external sources and residues left on the plated surfaces from the use of abrasive cleaners or polishes.
5HSDLURUUHSODFHPHQWRISDUWVWKDWDUHVXEMHFWWRQRUPDOZHDUDQGWHDUGXULQJWKHZDUUDQW\SHULRG7KHVHSDUWV
include: paint, batteries and the discoloration of glass.
'DPDJHVUHVXOWLQJIURPIDLOXUHWRLQVWDOORSHUDWHRUPDLQWDLQWKHDSSOLDQFHLQDFFRUGDQFHZLWKWKHLQVWDOODWLRQ
instructions, operating instructions, and listing agent identification label furnished with the appliance; (2) shipping or
improper handling; (3) improper operation, abuse, misuse, continued operation with damaged, corroded or failed
components, accident, or improperly/ incorrectly performed repairs; (4) environmental conditions (5) installation or use
of components not supplied with the appliance or any other components not expressly authorized and approved by
HHT; (6) modification of the appliance not expressly authorized and approved by HHT in writing; and/or (7) interruptions or fluctuations of electrical power supply to the appliance.
2XUREOLJDWLRQXQGHUWKLVZDUUDQW\GRHVQRWH[WHQGWRWKH6LPSOL)LUHILUHSODFH¶VFDSDELOLW\WRKHDWWKHGHVLUHGVSDFH
This warranty is void if:
7KHILUHSODFHLVVXEMHFWWRRURSHUDWHGLQDWPRVSKHUHVFRQWDPLQDWHGE\FKORULQHIOXRULQHRURWKHUGDPDJLQJFKHPL-
cals.
7KHILUHSODFHLVVXEMHFWHGWRRURSHUDWHGLQSODFHVZLWKSURORQJHGSHULRGVRIGDPSQHVVRUFRQGHQVDWLRQRUZHDWKHU
Examples include but are not limited to outdoors, porches, and laundry rooms.
7KHUHLVDQ\GDPDJHWRWKHILUHSODFHRURWKHUFRPSRQHQWVGXHWRZDWHURUZHDWKHUGDPDJH
LIMITATIONS OF LIABILITY:
7KHRZQHU¶VH[FOXVLYHUHPHG\DQG6LPSOL)LUH¶VVROHREOLJDWLRQXQGHUWKLVZDUUDQW\XQGHUDQ\RWKHUZDUUDQW\H[SUHVV
or implied, or in contract, tort or otherwise, shall be limited to replacement, repair, or refund, as specified above. In no
event will SimpliFire be liable for any incidental or consequential damages caused by defects in the appliance. Some
states do not allow exclusions or limitation of incidental or consequential damages, so these limitations may not apply
to you. This warranty gives you specific rights; you may also have other rights, which vary from state to state.
(;&(37727+((;7(173529,'('%</$:6,03/,),5(0$.(612(;35(66:$55$17,(627+(57+$1
7+(:$55$17<63(&,),('+(5(,17+('85$7,212)$1<,03/,(':$55$17<,6/,0,7('72'85$7,21
2)7+((;35(66(':$55$17<63(&,),('$%29(
4
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
Page 5
2
2
GENERAL INFORMATION
A. Appliance Certifi cation
MODELS: SF-PP23-E, SF-PP26-E
LABORATORY: CSA International
TYPE: Electric Air-Heaters Fixed and Location-Dedicated
Electric Room Heaters
STANDARD: UL 2021 (2nd Edition) CSA C22.2 No 46-M1988
NOTICE: This installation must conform with local codes.
NOT INTENDED FOR USE AS A PRIMAR Y HEAT SOURCE.
This appliance is tested and approved as either supplemental room heat or as a decorative appliance. It should not be
factored as primary heat in residential heating calculations.
Note: The device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
B. Unpacking and Inspecting Appliance
WARNING! DO NOT use this Electric Fireplace if any
part has been under water. Immediately call a qualifi ed
service technician to inspect and to replace any part of
the electrical system if necessary . Keep plastic wrapping
away from children.
• Carefully remove the appliance and components from
the packaging. Discard packaging.
• Carefully inspect components for any damage.
• Reference parts list to verify all parts have been received.
• Read all the instructions before starting the installation.
Follow these instructions carefully during the installation
to ensure maximum safety and benefi t.
C. Model and Serial Number Information
The model and serial number information is located on
the rating plate. The rating plate is located on the rear
exterior wall of the fi replace.
SF-PP23-E
This equipment uses and can radiate radio frequency
energy and, if not installed and used in accordance with
the instructions , may cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult an experienced radio/TV technician for help.
Homeowner Reference Information
Model Name: ___________________________________________ Date purchased/installed: __________________
Serial Number: __________________________________________ Location on fi replace: _____________________
We recommend that you record the following pertinent
information about your fi replace.
SF-PP26-E
Dealership purchased from: _______________________________ Dealer Phone: __________________________
Notes: _______________________________________________________________________________________
_____________________________________________________________________________________________
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
5
Page 6
3
3
GETTING STARTED
A. Parts and Hardware
Parts and Hardware List
Part Quantity
Fireplace 1
Instruction Manual 1
Remote Control 1
AAA Battery 2
Mounting Bracket 2
Mounting Screws 4
Mounting Screws
B. Tools and Supplies Needed
Before beginning the installation be sure that the following
tools and building supplies are available.
Tape measure
Pliers
Hammer
Gloves
Magnetic Phillips screwdriver
Safety glasses
Flat blade screwdriver
Mounting Bracket
C. Appliance and Mantel Dimensions
H
W
Fireplace Dimensions
D
W
D
H
Fireplace Mantel
Model
SF-PP23-E 22-7/8 20-1/2 8-7/8 23 20-1/2 9-1/4
SF-PP26-E 26 23-5/8 8-7/8 26-1/8 23-3/4 9-1/4
6
Width
(W)
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
Height
(H)
Depth
(D)
Mantel Opening Size
Width
(W)
Height
(H)
Mantel Minimum Depth
(D)
Page 7
D. Location
When choosing a location for your fi replace ensure that
the general rules are followed:
• For best results, install out of direct sunlight.
• Power supply service must be installed within
proximity of electric fi replace prior to fi nishing to
avoid reconstruction.
F. Electrical Supply Circuit Requirements
Plan the location of the appliance so that it will have
adequate electric power. A 15 AMP, 120V/60hz. circuit
is required. Additional appliances on the same circuit as
this appliance may exceed the current rating of that circuit. A dedicated circuit is not required, but is preferred
to prevent circuit breaker trips or fuse failure.
• See Figure 3.C for appliance dimensions and to
determine location of appliance installation.
E. Clearance to Combustibles
Minimum Clearance to Combustibles
Sides.......................0 in.
Floor........................0 in.
Top..........................0 in.
Back........................0 in.
Front......................36 in.
WARNING! Risk of Fire! Keep electrical cords, drapery,
furnishings or other combustibles at least 3 ft. (0.9 m)
from the front of the electric fi replace, and away from the
sides or rear.
G. Electrical Connection
WARNING! Risk of Fire, Electrical Shock and Injury.
Electrical wiring must comply with local building codes
and other applicable regulations to reduce the risk of
fi re, electrical shock and injury.
WARNING! Risk of Fire, Electrical Shock and Injury.
Ensure the power cord is not installed so that it is pinched
or against a sharp edge and ensure that the power cord is
stored or secure to avoid tripping and snagging.
A 15 AMP, 120 Volt, 60 Hz. circuit with a properly
grounded outlet is required. The unit comes with a 5 ft.
(1524 mm) long three wire 16AWG IEC-320 power cord.
Plug in the IEC connector to the rear upper corner of the
appliance then connect the cord to the wall socket.
The fi replace power cord has a three pin NEMA-5-15P
plug (Figure 3.1A). An adapter must be used for connecting to a two-slot receptacle (Figure 3.1C). The
green grounding wire extending from the adapter must
be connected to a permanent ground such as a properly
grounded outlet box. The adapter should not be used if
a three slot grounded receptacle is available.
Grounding
Pin
Figure 3.1 Cord Electrical Connection
Metal Screw
Cover of Grounded
Outlet Box
CBA
Grounding
Head
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
7
Page 8
4
4
INSTALLATION
A. Installation into Cabinet
1. Locate the securing hardware and mounting brackets.
See Figure 4.1.
Figure 4.1 Mounting Hardware
2. Lift fi replace into the rear of the fi nished mantel and slide
forward into opening. See Figure 4.2
2 - Mounting Brackets
4 - Securing Screws
4. Place fi replace in desired location. Plug into outlet.
See plug-in / outlet grounded view shown in Figure
4.4.
WARNING! Risk of Fire, Electrical Shock and Injury.
Ensure the power cord is not installed so that it is pinched
or against a sharp edge and ensure that the power cord is
stored or secure to avoid tripping and snagging.
Figure 4.4 Grounded Plug-in
NOTE: Wiring procedures and connections shall be in
accordance with the national and local codes having
jurisdiction.
Figure 4.2 Installing Fireplace
3. Secure the fi replace into fi nished mantel by installing
brackets. Line up holes in brackets with holes in
mantel and secure each side with two screws.
See Figure 4.3.
WARNING! Risk of Fire! Do not store or use gasoline
or other fl ammable vapors and liquids in the vicinity of the
appliance.
Note: Slight gap may
exist between glass
edge and glass frame.
Figure 4.5 Finished View
NOTICE: After installation, ensure there is a minimum of
six square inches of ventilation area between inside and
outside of fireplace mantel. This is required for blower
make-up air.
Figure 4.3 Securing Fireplace
8
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
Page 9
5
5
OPERATING INSTRUCTIONS
CAUTION! The unit’s power cord must be connected to
a properly grounded and protected 120V outlet. Always
use ground fault protection where required by the electrical code.
CAUTION! Do not operate the unit if it is damaged or has
malfunctioned. If you suspect the unit is damaged, call
a qualifi ed service technician to inspect and replace any
part of the electrical system if necessary.
Note: To use both remote and manual function, the main
power switch must in “ON” position.
Note: A harmless slight brief odor may occur during fi rst
use or after prolonged period of storage.
A. Manual Switch Function
The appliance can be operated by both remote control
and manual button. Once the unit has been properly
connected to a grounded electrical outlet, turn on the
main power switch located on the face of the appliance.
See Figure 5.1.
Main Power Switch
Flame Button
By pressing the FLAME button, the unit will cycle
through four fl ame effects.
Heater Button
- Press the heater button once to turn 750W power on.
Appliance will beep and illuminate 1 red LED.
- Press again turns 1500W power on.
Appliance will beep and illuminate 2 red LEDs.
- Press third time turns heater off.
NOTE:
There is a brief delay between the heater command and
the heating turning ON. When the appliance receives
a heater ON command, the appliance blower will turn
ON for 8 seconds before the heater turns ON. There is
also an 8 second delay between heater off and blower
shutdown.
The POWER switch supplies power to all function of the
fi replace. This switch must be in the “ON” position for
any of the functions including the remote.
Main Power Switch
Figure 5.1 Manual Operating Switches
Flame Button
Heater Button
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
9
Page 10
B. Operating by Remote Control
• The fireplace Main Power Switch must be in the
“ON”position for the remote control to function.
• Make sure batteries are properly installed in Remote
Control.
- Battery requirements 2 x AAA batteries
(included)
• The effective range of the remote is up to 13 ft.
• The remote control must be within the 13 ft. range and
also be pointed directly at the face of the appliance.
For best results, position the remote control within 45
degrees of the face of the appliance .
C. Resetting Temperature Cutoff Switch
The heater is protected with a safety device to prevent
overheating. Should the heater overheat, an automatic cutoff will turn the heater OFF. It will not turn ON
automatically without being reset. If it overheats for any
reason, it can be reset by:
1. Turn fi replace to off
2. Unplug unit and wait 5 minutes
3. Plug in and turn on.
CAUTION: If appliance overheats repeatedly, discontinue use and call your dealer.
CAUTION: If you need to continuously reset the heater,
unplug the appliance and call your dealer.
ICON TITLE FUNCTION REMOTE LCD
DISPLAY
The POWER button will turn the
fi replace on. It will also put the
POWER
FLAME
HEATER
THERMOSTAT
TIMER
fi replace in a standby mode.
This will turn off all functions at
once but will hold the settings in
memory except Heater function.
The unit will turn on at the same
settings by pressing the power
button again.
By pressing the FLAME button,
the unit will cycle through four
fl ame effects.
Press Heater button once 750W
heater turns on.
Press Heater button twice 1500W
turns on,
Press Heater button three times,
turns off heater.
Pressing the Temperature button
adjusts the heaters response
to the ambient temperature
conditions in the room.
Temperature adjusts from 16 °C
- 28 °C (61 °F - 82 °F). Power
much be on to set from °C to °F.
Hold for 3 seconds and the LCD
display from °C to °F.
Pressing the Timer button sets
the time desired for the fi replace
to run. The Timer can be set from
.5 hour up to 9 hours in 1 hour
increments.
LCD illuminates and
displays fl ame status
Icon and temperature
set point.
LCD illuminates and
displays fl ame status
icon.
LCD illuminates
and displays heater
status icon.
Remote displays
the temperature. If
in Stand-by mode,
temperature displays
but cannot be
adjusted.
Remote will display
the time setting
selected. If in Standby mode time will
display but cannot be
adjusted.
FIREPLACE RESPONSE
Fireplace emits single audible beep
to confi rm command to transition to
ON or STANDBY state
Fireplace emits single audible beep
to confi rm command to transition
between four FLAME states.
Fireplace emits signal audible
beep to confi rm command to
transition between HEATER states.
Fireplace displays one red LED for
8 seconds to confi rm low heater
command. Fireplace displays two
red LED for 8 seconds to confi rm
high heater command.
Fireplace emits single audible beep
to confi rm command to change
desired temperature setpoint
Fireplace emits single audible beep
to confi rm command to transition
between four FLAME states.
LIGHT
10
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
Pressing Spotlight button will
switch spotlight ON and Off.
No Indicator.
Fireplace will emit one audible
beep as it transitions ON and OFF
states.
Page 11
6
6
MAINTENANCE
A. Maintenance
WARNING! Risk of Shock! Always unplug the cord before moving or servicing. Do not immerse appliance in
water.
• Always turn OFF the appliance and disconnect the
cord from the electrical outlet before cleaning your
appliance.
• Light accumulated dust may be removed from the ap-
pliance exterior with a soft cloth or vacuum cleaner.
• Wipe the exterior surfaces of the appliance occasion-
ally with a microfiber cloth using a solution of mild
detergent and water. Dry thoroughly before operating
the appliance.
CAUTION! Do not allow water to run into the interior of
the appliance as this could create a fi re or electric shock.
Always unplug the cord before moving or servicing.
• The fan motor is factory lubricated for life and will not
require further lubrication.
• Store appliance in a clean dry place when not in use.
WARNING! Risk of Fire! To reduce risk of fi re, do not
store or use gasoline or any other fl ammable vapors or
liquids in the vicinity of the appliance.
B. Cleaning
Cleaning Glass
Dust particles can be removed by buffi ng lightly with a
clean dry cloth. Fingerprints and other marks can be
cleaned with a cloth dampened with a quality household
glass cleaner. The glass should be completely dried with
a lint free cloth or paper towel. Do not use abrasive cleaners on glass surface. Do not spray liquids directly onto
any surface.
Metal Surface
Dust particles can be removed by buffi ng lightly with a
clean dry cloth. A damp cloth can be used to clean painted surfaces. Do not use abrasive cleaners. Do not spray
liquids directly on to any surface.
C. Servicing
This appliance is not serviceable. In the unlikely event of
a product failure, contact a Hearth & Home Technologies
dealer for assistance.
WARNING! Risk of Electrical Shock! Any other servicing needed must be performed by an authorized service
representative. Do not attempt to service the unit yourself.
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
11
Page 12
D. Service Parts List
Service Parts
SF-PP26-E, SF-PP23-E
26” & 23 Electric Fireplace
#1 26” Glass/Door Assembly
Beginning Manufacturing Date: Feb 2013
Ending Manufacturing Date: Active
#2 23” Glass/Door Assembly
#3 Remote
IMPORTANT: THIS IS DATED INFORMATION. Parts must be ordered from a dealer or distributor. Provide
model number and serial number when requesting service parts from your dealer or distributor.
ITEM DESCRIPTION COMMENTS PART NUMBER
1 Glass/Door Frame. 26"
2 Glass Door Frame, 23"
Remote REMOTE-SF-ELEC
3
Hardware Pack
Contains mounting brackets and screws.
GLA-PP26
GLA-PP23
HRDW-PP
Stocked
at Depot
Y
Y
Y
Y
Installation Manual
12
SimpliFire • SF-PP23-E, SF-PP26-E • 2040-901 Rev. D • 10/13
2040-901
10/13
Loading...