Simplicity Symmetry SYMST, Symmetry SYMUSA, Symmetry SYMCLNT, Symmetry SYMCL, Symmetry SYM Owner's Manual

(The chances are you’re

never going to read me)

Owner’s Manual

all models

www.simplicityvac.com

1

IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2

Polarization instructions .................................................................................. 3

Description of the vacuum .............................................................................. 4

Before using your Symmetry for the first time ................................................ 6

Operation

Unwinding the power cord .............................................................................. 7

Turning vacuum on / off ................................................................................. 8

Vacuuming carpet ........................................................................................... 9

Vacuuming hard surfaces ............................................................................... 9

Carpet height adjustment ............................................................................... 9

Vacuuming under furniture .............................................................................. 10

Carrying the vacuum ...................................................................................... 11

Attachment Cleaning

Wand cleaning ................................................................................................ 12

Cleaning tools ................................................................................................. 13

Adjusting the suction power ........................................................................... 14

Optional cleaning tools ................................................................................... 15

Connecting attachment hose .......................................................................... 16

Maintenance and Care

When to change the vacuum bag/Full bag indicator light .............................. 17

Replacing the vacuum bag ............................................................................ 18

When to change the filters .............................................................................. 19

Replacing the filters ........................................................................................ 19

Removing and reinstalling bottom plate ......................................................... 21

Replacing the agitator belt ............................................................................ 22

Lifetime belt protection warranty ...................................................................... 23

Replacing the headlight bulb ......................................................................... 24

Edge cleaning ................................................................................................ 24

Annual checkup reminder ............................................................................... 24

Problem Solving Guide

Unclogging nozzle and hose .......................................................................... 25

Thermal motor protection ................................................................................ 26

Jammed brushroll ............................................................................................ 26

Trouble shooting .............................................................................................. 27

How to contact your Authorized Retailer ........................................................ 27

Visit Simplicity online ....................................................................................... 27

Warranty ................................................................................................................. 28

Contents

2

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed,
including the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS APPLIANCE

The manufacturer cannot accept responsibility for damage

caused when the appliance is not used according to the
instructions, or for uses other than those for which it
was intended.

To reduce the risk of fire, electric shock or injury:

• Do not leave appliance when plugged in.

Unplug from outlet when not in use and
before servicing.

• WARNING: ELECTRIC SHOCK COULD
OCCUR IF USED OUTDOORS OR ON

WET SURFACES.

• Do not allow to be used as a toy. Close

attention is necessary when used by or
near children.

• Use only as described in this manual.

Use only manufacturer’s recommended
attachments.

• Do not use with damaged cord or plug. If

appliance is not working as it should, has
been dropped, damaged, left outdoors,
or dropped into water, return it to your
Authorized Retailer for service.

• Do not pull or carry by cord, use cord as

a handle, close a door on the cord, or pull
cord around sharp edges or corners. Do

not run appliance over cord. Keep cord

away from heated surfaces.

• Do not unplug by pulling on cord. To

unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with
wet hands.

• Do not put any object into openings. Do

not use with any opening blocked; keep
free of dust, lint, hair and anything that

may reduce air ow.

• Keep hair, loose clothing, ngers and all

parts of body away from openings and
moving parts.

• Do not pick up anything that is burning or

smoking, such as cigarettes, matches or
hot ashes.

• Do not use without vacuum bag and/or
lters in place.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs.

• Do not use to pick up ammable or

combustible liquids, such as gasoline, or
use in areas where they may be present.

• Do not attempt to service the unit while

appliance is plugged in.

SAVE THESE INSTRUCTIONS.

WARNING:

3

POWER CORD, 2-WIRE POLARIZED CORD
Household Models: SYME, SYMENT, SYMST, SYMDL,

SYMPBP, SYM, SYMUSA, SYMCLNT,
SYMCL, SYMS, SYMD, SYMPNT &
SYMP

To reduce the risk of electric shock, this product

is equipped with a polarized alternating current

line plug (a plug having one blade wider than the

other). This plug will fit into the power outlet only

one way. This is a safety feature. If you are unable to

insert the plug fully into the outlet, try reversing the

plug. If the plug should still fail to fit, contact a

qualified electrician to replace the obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

Polarization Instructions

Grounding Instructions
Commercial Models: SYMCNT, SYMC & SYMCBP

This vacuum cleaner must be grounded. If it should malfunction or break down,

grounding provides a path of least resistance for electric current to reduce the risk of

electric shock. This vacuum cleaner is equipped with a cord having an equipment-

grounding conductor and grounding plug. The plug must be plugged into an

appropriate outlet that is properly installed and grounded in accordance with all local

codes and ordinances.

This vacuum cleaner is for use on a nominal 120-volt circuit and has a ground plug

(see illustration). Make sure the vacuum is connected to an outlet having the same

configuration as the plug. No adapter should be used with this vacuum.

Grounded

Outlet

Grounding

Grounded
Outlet Box

WARNING – Improper connection of

the equipment-grounding conductor
can result in the risk of electric shock.
Check with a qualified electrician or
service person if you are in doubt
as to whether the outlet is properly
grounded. Do not modify the plug
provided with the vacuum – if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.

4

Description of the Vacuum

6

18

17

5

13

16

10

9

11

8

7

2

4

3

1

12

14

15

19

5

1 Ergonomic handle

2 Main on / off power switch

(for models SYMDL, SYMPBP, SYM, SYMS, SYMD, SYMPNT, SYMP,

SYMCNT, SYMC & SYMCBP)

3 Power Cord

4 Carrying handle

5 Bag compartment cover (to replace vacuum bag)

6 Xenon headlight (for all models except SYMUSA, SYME & SYMENT)

7 Vacuum nozzle

8 Furniture guard

9 Carpet / Floor selector (for models SYMDL, SYMPBP, SYM, SYMUSA,

SYMPNT & SYMP)

10 Quick release cord hook

11 Ready Reach

™

tools

(for models SYME, SYMST, SYMDL, SYMPBP, SYM, SYMUSA, SYMCL,

SYMS, SYMD, SYMP, SYMC & SYMCBP)

12 Suction control dial

13 Combination dusting / upholstery brush
(for models SYME, SYMST, SYMDL, SYMPBP, SYM, SYMUSA, SYMCL,

SYMS, SYMD, SYMP, SYMC & SYMCBP)

14 Crevice tool

(for models SYME, SYMST, SYMDL, SYMPBP, SYM, SYMUSA, SYMCL,

SYMS, SYMD, SYMP, SYMC & SYMCBP)

15 Thermal reset button

16 Full bag / clog indicator

(for models SYMPBP, SYM, SYMD, SYMPNT, SYMP, SYMCNT, SYMC &

SYMCBP)

17 Main on / off power switch (for models SYME, SYMENT, SYMST, SYMCLNT,

SYMCL & SYMUSA)

18 Handle release pedal

19 Brushroll jam indicator (for models SYMPBP & SYMCBP)

Description of the Vacuum

6

Before Using your Symmetry for the First Time

Attaching the handle to the vacuum

The vacuum cleaner and the handle are

packed separately.

• After first removing the handle screw,

position the handle behind the vacuum

cleaner and level with the top of the

unit. Hold the power cord down and

away from the vacuum while the handle

is being attached. Make sure that the

switch on the handle is positioned

toward the front of the vacuum cleaner.

• On the bottom of the handle are two

“T-shaped” rails that slide forward onto

two guides located on the top of the

vacuum cleaner. Line up the handle so

that the “T” rails will slide into the guides

and push the handle forward.

• Insert the handle screw and tighten

securely.

• Turn the upper cord storage hook to

the upright position and wind the power

cord around the cord storage hooks

when storing the vacuum cleaner.

7

Operation

Unwinding the power cord

• The upper cord hook rotates to allow for

quick access to the power cord.

8

Operation

On / Off switch
Models: SYMDL, SYMPBP, SYM, SYMS,

SYMD, SYMPNT, SYMP, SYMCNT,
SYMC & SYMCBP

• To start the vacuum cleaner, ip the

“on / off” switch located on the handle

to the “on” position.

• To stop the vacuum cleaner, ip the “on /

off” switch to the “off” position.

• Turn the vacuum cleaner off before

unplugging from electrical outlet.

On / Off switch
Models: SYME, SYMENT, SYMST,

SYMUSA, SYMCLNT & SYMCL

• To start the vacuum cleaner, ip the

“on / off” switch located on the side of

the bag compartment to the “on” position

as indicated on the switch.

• To stop the vacuum cleaner, ip the

“on / off” switch to the “off” position

as indicated on the switch.

• Turn the vacuum cleaner off before

unplugging from electrical outlet.

Off

On

9

Operation

Vacuuming carpet
Models: SYMDL, SYMPBP, SYM,

SYMUSA, SYMPNT & SYMP only

• For carpet cleaning, slide the

carpet / oor selector toward the back

of the nozzle so that it reads “Carpet”.

Vacuuming hard surfaces
and using tools
Models: SYMDL, SYMPBP, SYM,

SYMUSA, SYMPNT & SYMP only

• To prevent brushroll from spinning when

cleaning bare oors or using tools, slide the

carpet / oor selector toward the front of the

nozzle so that it reads “Floor & Tools”.

Carpet height adjustment

Your Simplicity upright vacuum cleaner is

designed with an automatic self-adjusting

rug nozzle. No manual adjustments are

required. The height of the rug nozzle is

instantly and automatically adjusted to

carpet pile height. This self-adjusting feature

allows the rug nozzle to oat evenly over all

carpet pile surfaces.

CarpetFloor & Tools

10

Vacuuming under furniture

Your Simplicity Symmetry will lay flat on

the floor for effective cleaning under beds

and tables.

• Press the foot pedal release once for

normal vacuum cleaning.

• Press the foot pedal release a second

time to enable the vacuum to lay flat

on the floor.

Operation

11

Carrying the vacuum

To safely transport your vacuum,

especially when carrying the vacuum up

and down stairs, use the carry handle.

Operation

12

Attachment Cleaning

Wand cleaning
Models: SYME, SYMST, SYMDL,

SYMPBP, SYM, SYMUSA,
SYMCL, SYMS, SYMD, SYMP,
SYMC & SYMCBP

With the on-board cleaning tools and

vacuum wand, your Simplicity Symmetry

becomes a comprehensive cleaning system.

The models equipped with on-board tools

include an upholstery tool, dusting brush,

crevice tool, extension wand and stretch

hose.

• Remove the telescopic wand from the

body of the vacuum. Unlock the wand

collar (located on end of wand), extend

the wand and re-lock the wand collar.

NOTE: The wand collar locking rotation is

marked with arrows on the wand. The wand

collar lock and unlock functions require

only a 1/2 turn of the collar.

NOTE: You can connect any of the cleaning

tools to the end of the extension wand(s)

and twist for a secure fit. To remove the

cleaning tool from the extension wand(s),

simply twist and pull apart.

13

Attachment Cleaning

Ready Reach™ Cleaning tools
Models: SYME, SYMST, SYMDL, SYMPBP,

SYM, SYMUSA, SYMCL, SYMS,
SYMD, SYMP, SYMC & SYMCBP

Your vacuum is equipped with a dusting

brush, upholstery brush and crevice tool.

Other tools are available at your Authorized

Simplicity Retailer.

• Remove the cleaning wand from the

vacuum and turn the carpet / floor

selector to the “Floor & Tools” position

(SYMP model only, see page 9).

• Insert any of the tools onto the end

of the wand.

D usting Brush:

Ideal for table tops, shelves, blinds or

hard surface floors.

U pholstery Tool:

Ideal for soft surfaces like chairs and

couches. Remove the dusting brush clip

for upholstery cleaning.

C revice Tool:

Ideal for tight places like between seat

cushions or corners.

Crevice Tool

Dusting/Upholstery Tool

Wand with Dusting Brush

14

Adjusting the suction power for
tool cleaning

On the back of the vacuum, locate the

suction control dial and turn it to the

desired position. This reduces the suction

power coming through the hose. Close

the suction control dial when nished to

restore full suction power.

Attachment Cleaning

15

Attachment Cleaning

Optional cleaning tools

All Simplicity Symmetry vacuum cleaners offer

an attachment port that enables you to insert

optional cleaning tools (available through your

Simplicity Retailer). Should you have carpeted

stairs, for example, it is highly recommended

to use one of the two kits pictured, since each

offers either a 12- or 15-foot hose for safe

stair cleaning. These kits are effective overall

cleaning tools to address some of the hard to

reach areas of your home or car. Talk to your

Simplicity Retailer to see which tools might be

benecial for your home.

Deluxe Attachment Set (SDK12)

1. 12-foot hose

2. Curved wand

3. Extension wand (2 pieces)

4. Dusting brush

5. Crevice tool

6. Upholstery tool

7. Upholstery brush insert

8. Deluxe floor brush

Deluxe Attachment Set (SDK15)

1. 15-foot hose

2. Curved wand

3. Extension wand (2 pieces)

4. Deluxe floor brush

16

Attachment Cleaning

Connecting the attachment hose
to the vacuum cleaner

Pull out and open the suction control dial by

turning the lid located on the back of the vacuum

cleaner. Insert the soft, rubber end of the hose

into the cleaning attachment opening. Push in

while twisting the hose end to ensure the hose is

fastened securely.

NOTE: You can connect any of the cleaning tools

to the end of the extension wand(s) and twist for

a secure fit. To remove the cleaning tool from the

extension wand(s), simply twist and pull apart.

WARNING
Models SYMENT, SYME, SYMST, SYMCLNT,

SYMCL, SYMS, SYMD, SYMCNT, SYMC
& SYMCBP

There is no way to turn the brushroll off.

Therefore, when using the cleaning tools it is

important to keep your Simplicity vacuum from

running in the same spot for a period of time, as

carpet or flooring damage could result. If you

need to keep the vacuum in the same spot for a

period of time, such as at the base of the stairs

when cleaning the stairs, place something, like

a flattened cardboard box, under the vacuum to

prevent damage to the floor.

17

Attachment Cleaning

When to change the vacuum bag/
Full bag indicator light

Models: SYMPBP, SYM, SYMD,

SYMPNT, SYMP, SYMCNT,
SYMC & SYMCBP

The full bag indicator light is designed to

show when the bag is full or when there is

a clog in the vacuum.

The system measures airow and alerts

the user when airow is signicantly

reduced – most commonly from full bags

and clogs.

The light could also come on when

vacuuming ne powders such as our or

drywall dust. These materials can quickly

block the bag pores, signicantly reducing

airow before the bag appears to be full.

The vacuum bag should still be changed.

The light could also come on during

attachment cleaning.

Note: The vacuum bags are disposable

and intended to only be used once.

Do not attempt to reuse as suction

and ltration performance would be

greatly reduced.

18

Maintenance and Care

Replacing the vacuum bag

• Open the bag compartment lid.

• Remove vacuum bag by pulling bag

collar off the bag holder.

• Attach the new vacuum bag onto the

bag holder.

• Tuck the bag corners into the vacuum

before replacing the bag compartment

lid.

• Replace lid and press onto vacuum until

it snaps into place.

19

Maintenance and Care

When to change the filters

At minimum, it’s recommended to replace

the filters once a year or after using twelve

vacuum bags, whichever comes first.

If someone in your household is highly

sensitive to airborne allergens, it is

recommended to change the filter set

after every six vacuum bags.

Replacing the HEPA post filter
Models: SYMPBP, SYMPNT & SYMP

• Open the bag compartment lid and

locate the post filter on the inside base

of the cover.

• Remove the used filter and throw away.

• Press new HEPA post filter into place on

the inside base of the cover.

• Close the bag compartment lid.

Replacing the electrostatic or
foam post filter
Models: SYME, SYMENT, SYMST, SYMDL,

SYM, SYMUSA, SYMCLNT,
SYMCL, SYMS, SYMD, SYMCNT,
SYMC & SYMCBP

• Open the bag compartment lid and

locate the post filter on the inside base

of the cover.

• Remove used filter and throw away.

• When inserting the new electrostatic

or foam post filter, align new filter over

the strips and press securely into place.

• Close the bag compartment lid.

NOTE: Post filters cannot be washed.

20

Replacing the secondary lter

The secondary lter protects the motor

from dust and dirt. Before installing a new

vacuum bag, check the lter. Accumulated

dirt in the bag compartment will be

collected on this lter and may restrict

motor performance when the lter

becomes dirty.

• Open the bag compartment lid and

locate the secondary lter on the bottom

of the bag compartment.

• Remove secondary filter from the bottom

of the bag compartment.

• The foam secondary filter can be

washed and reused. If washed, make

sure the filter is completely dry before

reinstalling. The charcoal secondary

filter cannot be reused (models

SYMPBP, SYMPNT & SYMP). Remove

and throw away the used charcoal

secondary filter.

• Insert the new filter by sliding it under

the bag support.

• Close the bag compartment lid.

Maintenance and Care

21

Maintenance and Care

Removing and reinstalling bottom plate

CAUTION: Disconnect the vacuum cleaner

from the electrical outlet before removing

the bottom plate.

• Depress handle release pedal twice and

place the vacuum cleaner in the low

position.

• Turn vacuum cleaner over, exposing the

underside.

• Slide locking latch to the right.

• Press tabs inward on each side and pull

bottom plate off.

• Reinstall by placing lower edge of bottom

plate along lower edge of nozzle. Snap

plate into place. Slide locking latch to the

left to secure.

22

Maintenance and Care

Replacing the agitator belt
Models: SYME, SYMENT, SYMST, SYM,

SYMUSA, SYMCLNT, SYMCL,
SYMS, SYMD, SYMCNT & SYMC

NOTE: To ensure maximum cleaning efficiency,

the condition of the belt should be checked

regularly. If belt is stretched, cracked or if

excessive slipping is occurring, replace the

belt.

• Disconnect the vacuum cleaner from the
electrical outlet.

• Turn the unit over and remove the bottom

plate (See "Removing and reinstalling bottom
plate").

• Remove agitator and worn or broken belt.

• Loop the new belt around the motor drive

shaft and the agitator pulley.

• Reinstall the agitator into the housing while

making sure that the positioning fork faces
down and straddles the support guide.

• Rotate agitator pulley, making sure that the

belt is not twisted.

• Reinsert the vented support fitting. Reinstall

bottom plate (See “Removing and reinstalling
bottom plate”).

23

Maintenance and Care

Replacing the agitator belt
Models: SYMDL, SYMPBP, SYM, SYMUSA,
SYMPNT, SYMP & SYMCBP

NOTE: To ensure maximum cleaning efficiency,

the condition of the belt should be checked

regularly. If belt is stretched, cracked or if

excessive slipping is occurring, replace the

belt.

• Disconnect the vacuum cleaner from the
electrical outlet.

• Turn the unit over and remove the bottom

plate (See “Removing and reinstalling bottom
plate”).

• Move carpet / floor selector to the “Floor &

Tools” position.

• Rotate belt so that the linkage rod can be

removed. Slide linkage rod out and move
the carpet / floor selector to “Carpet”
position and let rod rest behind brushroll
compartment.

• Remove agitator and worn or broken belt.

• Loop the new belt around the motor drive

shaft and the agitator pulley.

• Reinstall the agitator into the housing while

making sure that the positioning fork faces
down and straddles the support guide.

• Reinstall linkage rod by moving carpet / floor
selector to the “Floor & Tools” position.

• Rotate belt away from linkage rod, then

install linkage rod into agitator.

• Rotate agitator pulley, making sure that the

belt is not twisted.

• Reinsert the vented support fitting. Reinstall

bottom plate (See “Removing and reinstalling
bottom plate”).

Linkage Rod

Lifetime belt protection warranty

MODELS: SYMPBP & SYMCBP

Your vacuum belt is covered with a
lifetime warranty. Should the vacuum
belt break, simply bring your vacuum
or the broken belt to your Simplicity
Retailer for a free replacement.

24

Replacing the headlight bulb

CAUTION: Disconnect the vacuum

cleaner from the electrical outlet before

replacing bulb.

• Remove bottom plate (See “Removing

and reinstalling bottom plate”).

• Remove the headlight bracket by pulling

upward on bracket. To remove the light

bulb, pull it straight out of the socket. To

install new bulb, simply push it straight

into the socket for a secure fit. Reinsert

bracket back into nozzle.

• Reinstall bottom plate (See “Removing

and reinstalling bottom plate”).

Edge cleaning

The edge cleaning feature provides for

improved cleaning of carpets near walls

and stationary furniture. For maximum

edge cleaning, place the right side of the

nozzle against the wall or furniture.

Annual checkup reminder

To keep your vacuum in peak operating

condition, it is recommended you bring

your vacuum to your Authorized Simplicity

Retailer for an annual checkup. Your

Retailer will conduct a comprehensive

examination to ensure your vacuum is in

top operating condition.

Maintenance and Care

25

Problem Solving Guide

Unclogging nozzle and hose

CAUTION: Disconnect the vacuum

cleaner from the electrical outlet before

cleaning nozzle housing.

The nozzle hose, located on the back

of the vacuum, carries the dirt from the

nozzle to the vacuum bag. The hose also

functions as the attachment cleaning hose.

First check to see that a bag is installed or

that the bag has not broken open.

If the hose should become clogged

• Pull out and turn the lid of the cleaning

attachment opening. Remove the clog or

blockage.

• Remove the hose cuff from the nozzle

inlet and check for clog.

• Turn unit over and remove bottom plate

(See “Removing and reinstalling bottom

plate”). Check the nozzle inlet tube for

obstructions. Clear tube and reinstall the

bottom plate.

Inlet Tube

26

Problem Solving Guide

Thermal motor protection

Your Symmetry is equipped with a safeguard

to recognize when the vacuum heats up and

shuts itself down to protect your vacuum

cleaner. Note that when this happens, the

headlight is still on but the motor shuts off.

Common reasons why a vacuum may overheat

include operating a vacuum with a full bag or

when there is a clog in the vacuum.

• Unplug the vacuum.

• Inspect your vacuum for a full bag condition

or a hose clog and correct the problem. Locate

the Thermal Motor Reset button on the back

of the vacuum. Press button and resume

vacuuming.

If problem continues, contact your Authorized

Simplicity Retailer.

Jammed brushroll
MODELS: SYMPBP & SYMCBP

If an object, such as a throw rug or article of

clothing is ever picked up into your vacuum,

the vacuum will sense this “jammed brushroll”

condition and turn off the brushroll. When this

happens, the “brushroll warning” light on the top

of the nozzle will light up in red.

• Turn off the vacuum and remove the cause of

the jam. Turn vacuum back on. If the brushroll

is free of any object and the “brushroll warning”

light is still lit, it’s likely the clogged condition is

located in the vacuum motor fan. If so, please

take your Symmetry to a Simplicity Retailer for

service.

Thermal Reset

If problem persists,

consult owner’s manual

or contact retailer.

1. Unplug machine

2. Locate problem
source (clogged
hose or full bag)

3. Correct problem

4. Press reset button

27

Problem Solving Guide

Trouble Shooting

PROBLEM

Vacuum won’t turn on

Vacuum won’t pick up or
low suction

Dust escaping from
vacuum

POSSIBLE REASON

• Power cord not rmly

plugged in

• Blown fuse or tripped

breaker

• Needs service

• Vacuum bag full

• Clogged lter

• Hose clogged

• Worn brushroll

• Broken belt

• Dust cover not installed

properly

• Filter not installed
correctly

• Vacuum bag not installed

correctly

POSSIBLE SOLUTION

• Plug unit in rmly

• Check house fuse or

breaker. Replace fuse /
reset breaker.

• Take to Authorized Re­tailer (1-888-9-SIMPLY)

• Install new bag

• Install new lter

• Remove obstacle

• Replace brush strips

• Replace belt

• Reinsert the dust cover

and secure latch

• Review lter installation

(page 19)

• Review bag installation

(page 18)

Any other service should be done by an

Authorized Service Representative.

Service 1-888-9-SIMPLY

To locate your nearest retailer, visit our website at

www.simplicityvac.com

28

Warranty

What is Covered:

This warranty covers any defects in material and workmanship in your new Simplicity
Symmetry vacuum.

How Long Coverage Lasts:

Warranty coverage for Simplicity Symmetry models SYME, SYMENT, SYMST, SYMUSA,
SYMCLNT and SYMCL lasts three years. Warranty coverage for Simplicity Symmetry
models SYM, SYMS, SYMDL, SYMPBP, SYMD, SYMPNT and SYMP lasts four years.
Warranty coverage for the Simplicity Symmetry commercial models SYMCNT, SYMC and

SYMCBP lasts one year. Household models used commercially are only warranted for
90 days.

What is Not Covered:

• Damage to the vacuum which occurs from neglect, abuse, alterations, accident,
misuse or improper maintenance.

• Normal replacement items: disposable bags, disposable filters, light bulbs and
agitator brushes.

What Simplicity Vacuums Will Do:

This warranty provides, at no cost to you, all labor and parts to keep this vacuum in
correct operating condition during the warranted period.

How to Get Service:

Warranty service can only be obtained by presenting the vacuum to an Authorized
Simplicity Retailer. A proof-of-purchase and product serial number will be required
before service is rendered. To locate your nearest Simplicity Retailer, please call

1-888-9-SIMPLY or visit the Simplicity website at www.simplicityvac.com.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY AND ALL OTHER WARRANTIES
WHETHER WRITTEN, ORAL, EXPRESSED OR IMPLIED, (INCLUDING ANY WARRANTY
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). THIS WARRANTY
DISCLAIMS LIABILITY FOR INCIDENTAL, OR CONSEQUENTIAL DAMAGES.

How State Law Applies:

This warranty gives you specific legal rights, and you may also have other rights which
vary from state to state.

29

Owner’s Warranty Information

keep this for your records…

Date of purchase

Serial number

Model number

Purchased from:

Store name

Address

City, State, Zip

Telephone

B503-3400D ©2012 Tacony Corporation

www.simplicityvac.com