Simplicity 860E, 555M, 860M User Manual
Parts Manual
g
5HP Product
Mf
. No. Description
1694587 555M, 5HP
1694595 555M, 5HP
8HP Product
Mfg. No. Description
1694588 860E, 8HP
1694596 860M, 8HP
Intermediate
Walk-Behind Snowthrowers
Rev.
1731153
02/2008
Part No.:
TP 400-4148-01-IW-S
Table Of Content
s
PRODUCT COMPONENTS PAGES
Handles & Controls Group ...................................................................................................................................
Engine, Pulleys, & Frame Group - 5HP Tecumseh .............................................................................................
Engine, Pulleys, & Frame Group - 8HP Briggs & Stratton ..................................................................................
Auger & Impeller Group .......................................................................................................................................
Auger Housing Group ..........................................................................................................................................
Traction Drive Group ............................................................................................................................................
Wheels & Tires Group ..........................................................................................................................................
Decals Group .......................................................................................................................................................
Chute Crank Control Group .................................................................................................................................
12
16
18
20
24
26
28
Torque Specification Chart ..................................................................... Inside Back Cover
4
8
Handles & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
070uhdc
The above parts group applies to the following Mfg. Nos.:
1694587 - 555M
1694588 - 860E
1694595 - 555M
1694596 - 860M
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
4
TP 400-4148-01-IW-S
Handles & Controls Group
PART NO. DESCRIPTIONREF NO QTY.
NUT, 5/16-18 Hex Nyloc 1 5025057SM 2
BRACKET, Snow Stick- Lower 2 1726727ASM 1
SCREW, 5/16-18 x 3/4" Hex Head Cap 3 1921332SM 4
CLUTCH CABLE, Auger Drive- RH 4 7027426SM 1
HANDLE, Upper, Right Hand 5 1726574SM 1
GRIP, Clutch, RH 6 1722638SM 1
GRIP, Foam, Black 7 1726317SM 2
HAIR PIN 8 1722460SM 3
ROD, Shift, Lower 9 1666255SM 1
NUT, 1/4-20 2B Hex 10 1916622SM 2
LOCKWASHER, 1/4" Spring 11 1916964SM 3
BOLT, 1/4-20 x 2" Short Square Neck Carriage, GR 5 12 1931317SM 2
ROD, Upper, Shift 13 1720238SM 1
BLOCK, Pivot 14 1668524SM 2
SHIFT ROD PIVOT ASSEMBLY 15 1720240SM 1
SPRING, Compression 16 1715123SM 1
COTTER PIN, .125 x 1.00 17 1918452SM 1
BUSHING, .500 ID x .750 OD x .25 18 1668185SM 2
WASHER, 1/2" Flat (.531 ID x 1.250 OD x .08 Thick) 19 1924361SM 1
SHIFT ROD ASSEMBLY 20 1668523SM 1
SCREW, 1/4-20 x 2-1/4" Hex Flange Lock 21 1960705SM 1
WASHER, .250 (.27 ID x .62 OD) 22 1921319SM 2
KNOB, Tapered - 3/8-16 Internal Thread- Red 23 1726734SM 1
DASH ASSEMBLY 24 1726983ASM 1
HANDLE, Lower 25 1726572SM 1
WING KNOB, 5/16-18 26 1716632SM 2
WASHER, 5/16" Internal Tooth Lock 27 7090391SM 2
NUT, 5/16-18 Hex Flange Nyloc 28 1960686SM 4
WASHER, .312 (.34 ID x .75 OD) 29 1919326SM 2
ASSEMBLY, Rod w/Pin (Includes Ref. Nos. 31. 47, 54, 55 & 56) 30 1722633SM 1
SPRING, Compression 31 1722690SM 1
PUSH NUT 32 1960519SM 1
ROD, Hold Down 33 1722630SM 1
SCREW, 1/4-20 x 2" Hex Head Cap, GR 5 34 1960662SM 1
GRIP, Clutch, LH 35 1722667SM 1
NUT, 1/4-20 Hex Centerlock 36 1923358SM 2
SPACER, Handle 37 1715655SM 2
HANDLE, Upper, Left Hand 38 1726573SM 1
SCREW, 1/4-20 x 1-1/2" Hex Head Cap 39 1922837SM 2
SPACER, .268 ID x .394 x .165 40 1715654SM 2
SCREW, 1/4-20 x 3/4" Pan Head Torx Self-Tap 41 1960671SM 2
SCREW, 5/16-18 x 1-1/2" Hex Head Cap, GR 5 42 1921221SM 5
LEVER, Pivot 43 1722631ASM 1
NUT, 1/4-20 Hex Nyloc 44 1920397SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694587 - 555M
1694588 - 860E
1694595 - 555M
1694596 - 860M
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
5
TP 400-4148-01-IW-S
Handles & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
070uhdc
The above parts group applies to the following Mfg. Nos.:
1694587 - 555M
1694588 - 860E
1694595 - 555M
1694596 - 860M
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
6
TP 400-4148-01-IW-S
Handles & Controls Group
PART NO. DESCRIPTIONREF NO QTY.
TOOL, Clean-Out 45 7075909SM 1
NUT, #10-24 Hex Center Lock 46 7091267SM 1
ROD, Hand Control, not shown; part of item 30 47 1722632 1
HOLDER, Clean-Out Tool, Upper 48 1726728SM 1
CLUTCH CABLE, Ground Drive- LH 49 7027425SM 1
BOLT, 5/16-18 x 2" Curved Head Square Neck GR 2 50 7091740SM 4
WASHER, #10 Internal Tooth Lock 51 7090011SM 1
SCREW, #10-24 x 2" Hex Washer Head Machine, GR5 52 7091266SM 1
LOCKWASHER, Spring 5/16, not shown; part of item 30 53 1917356SM 4
BUSHING, .250 ID x .375 OD x .750, not shown; part of item 30 54 1722635 1
PIN, Clevis, not shown; part of item 30 55 1722634 1
SPRING, Compression, not shown, part of item 30 56 1722613 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694587 - 555M
1694588 - 860E
1694595 - 555M
1694596 - 860M
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
7
TP 400-4148-01-IW-S
Engine, Pulleys, & Frame Group - 5HP Tecumseh
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
070epi5t
The above parts group applies to the following Mfg. Nos.:
1694587 - 555M
1694595 - 555M
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
8
TP 400-4148-01-IW-S
Engine, Pulleys, & Frame Group - 5HP Tecumseh
PART NO. DESCRIPTIONREF NO QTY.
SCREW, 5/16-24 x 3/4" Hex Head Cap, GR 5 1 1921515SM 4
WASHER, 5/16" Flat 2 1924874SM 1
WIRE, Belt Stop 3 1725424SM 1
LOCKWASHER, 5/16" Exterior Tooth 4 1920427SM 3
ENGINE, 5HP Tecumseh, Model LH195SA-67427V 5* 1
HOSE, Oil Drain 6 1726942SM 1
NUT, 5/16-18 Hex Flange Lock- small 7 1931277SM 3
NUT, 5/16-18 Hex Flange Lock 8 1931277SM 1
ROD, Idler 9 1715092SM 1
ROLL PIN, 3/16 x 3/4" 10 2816169SM 2
FRAME ASSEMBLY, Intermediate (Orange) 11 7072566SM 1
SPEED NUT, 1/4-20 U-Type 12 1926018SM 6
BUSHING, 1.00 long 13 1666001SM 2
SUPPORT, Tie Bar 14 1715559A 1
SCREW, #10-24 x 1/2" Hex Washer Self-Tap 15 1929477SM 2
JAM NUT, 3/8-16 Hex Center Lock 16 1960251SM 4
WASHER, 3/8" Flat 17 1924940SM 3
ROD, Belt Guide 18 1674315SM 2
NUT, 3/8-16 Hex Nyloc Heavy Thin 19 1922694SM 4
SUPPORT, Frame 20 1715756A 1
SCREW, 5/16-18 x 1/2" Hex Washer Self-Tap 21 1924856SM 4
SUPPORT, Pivot 22 1715111SM 1
WASHER, 5/16" Flat 23 1919381SM 2
SCREW, 5/16-18 x 1-3/4 Hex Head Cap, GR 5 24 1922127SM 3
SCREW, 5/16-18 x 1-3/4 Hex Head Cap, GR 5 25 1922127SM 1
COVER, Bottom, Orange 26 7072555SM 1
SCREW, 1/4-20 x 5/8" Hex Washer Self-Tap 27 7091819SM 9
WASHER, 7/16" Flat 28 1925125SM 1
COTTER PIN, 1/8 x 3/4" 29 1918451SM 1
IDLER ARM ASSEMBLY 30 1715112SM 1
BOLT, 3/8-16 x 1-1/4" Short Square Neck Carriage 31 1960268SM 1
SPACER, .377 ID x .75 OD x .312 Long 32 2174870SM 1
PULLEY, Idler 33 2118414SM 1
BELT, Auger Drive, V Groove 34 1717393SM 1
BELT, Traction Drive, V Groove 35 1715127SM 1
SPRING, Extension 36 1715118SM 1
PAD, Brake 37 1669313SM 1
RIVET, Blind 38 2825160SM 2
ASSEMBLY, Idler Arm w/Brake Pad 39 1717320SM 1
BOLT, 3/8-16 x 1-3/4 Short Square Neck Carriage, GR 5 40 7091810SM 1
WASHER, 3/8" Flat (.41 ID x 1.00 OD x .13 Thick) 41 1922755SM 1
PULLEY, Idler 42 1668477SM 1
COVER, Belt 43 1725379SM 1
SPRING, Idler- Extension 44 1720237SM 1
Footnotes
Note*See your local Tecumseh distributor for engine service parts.
The above parts group applies to the following Mfg. Nos.:
1694587 - 555M
1694595 - 555M
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
9
TP 400-4148-01-IW-S
Engine, Pulleys, & Frame Group - 5HP Tecumseh
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
070epi5t
The above parts group applies to the following Mfg. Nos.:
1694587 - 555M
1694595 - 555M
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
10
TP 400-4148-01-IW-S
Loading...