Simplicity 760, 560, 1070 User Manual
Specifications and Main Features
- Variety of models
- Model 560 - 5H.P, 24 inch (60 cm) in width
- Model 760 - 7H.P, 24 inch (60 cm) in width
- Model 860 - 8H.P, 24 inch (60 cm) in width
- Model 870 - 8H.P, 28 inch (70 cm) in width
- Model 1070 - 10H.P, 28 inch (70 cm) in width
- Model 1080 - 10H.P, 32 inch (80 cm) in width
- Engine Type:
- Type of Engine: Tecumseh (With the exception of 860 which has a Briggs and Stratton)
- Number of Cyinders: 1
- number of cycles: 4
- Arrangement of Crankshaft: Horizontal type
- HP Range:
- 5 H.P (3.73 kW)
- 7 H.P (5.22 kW)
- 8 H.P (5.97 kW)
- 10 H.P (7.46 kW)
- Bore and Stroke:
- 5 H.P: 2-13/16 in x 1-15/16 in
- 7 H.P: 2-15/16 in x 2-17/32 in
- 8 H.P (Model 860): 3 in x 2 3/4 in
- 8 H.P (Model 870): 3-1/8 in x 2-17/32 in
- 8 H.P: 3-3/16 in x 2-17/32 in
- Displacement:
- 5 H.P: 204 in
- 7 H.P: 716 in
- 8 H.P (Model 860): 944 in
- 8 H.P (Model 870): 941 in
- 10 H.P.: 20.20 cu. in.
- Traction Drive:
- Type: Friction drive transmission with chain and gear drive
- Speeds: 5 Forward and 2 Reverse
- Axle: Solid with klik-pin locking for two-wheel drive
- Tires: 4.80/4.00-8 turf saver pneumatic tire
- Blower Housing:
- Construction: Welded steel stampings
- Effective Widths:
Model 560 & 760 24 inches
Model 860 24 inches
Model 870 28 inches
Model 1070 28 inches
Model 1080 32 inches
- Auger Opening Height: 19 inches
- Spout: 210 degrees of rotation
- Scraper Bar: The bar made of high carbon wear resistant steel
- Skid Shoes: Easily adjustable, made of heat treated steel
- Auger & Impeller:
- Auger Construction: Ribbon flite welded steel
- Impeller Construction: 4 steel blades
- Auger Diameter: 12 inches
- Overall Dimensions & Weight:
- Length: 56-7/8 inches
- Widths:
Model 560 & 760 26 inches
Model 860 26 inches
Model 870 30 inches
Model 1070 30 inches
Model 1080 34 inches
- Height: 37-3/8 inches
- Weight:
Model 560 226 lbs.
Model 760 243 lbs.
Model 860 240 lbs.
Model 870 255 lbs.
Model 1070 265 lbs.
Model 1080 265 lbs.
Frequently Asked Questions
Q: Describe the engine settings of the snowthrower.
A: With the exception of the Model 860 which has a Briggs and Stratton engine, all models are powered by Tecumseh snow engine.
Q: Describe the snowthrower features in terms of speed.
A: The snowthrower has five forward speeds and two reverse speeds.
Q: What is the value of effective width used with a snowthrower?
A: The value of effective width is 24 inches for Models 560, 760, 860 and increases to 32 inches when used with Model 1080.
Q: What is the weight of the models?
A: The weight of the model applies from, 226 pounds for Model 560 to 265 pounds for Models 1070 and 1080.
Q: Is there a spout for snow discharge fitted on to the snowthrower?
A: A spout fitted onto the snowthrower can be rotated by 210 degrees.
Q: What lubrication system is installed?
A: For this engine, a splash lubrication system is installed.
Q: What is the proper procedure for storing the snowthrower for off-season?
A: In preparation for off-season storage, the snowthrower should be cleaned and the fuel tank filled with fuel and a stabilizer and the battery should be disconnected or appropriately charged.
Q: Scraper bar height adjustment process?
A: Skid shoes can be modified in order to either raise or reduce height and this will adjust the height of scrub bars while also making sure that scrub bars are always parallel to the surface-object being worked on.
Q: In the situation the auger is unable to rotate, what action should be taken?
A: Begin by checking the auger drive lever which can be found at the control panel, if not engaged then engage it. If it is engaged but the auger is rotating, check the drive belt and look for foreign matter blockage in the auger.
User Manual
Loading...