Specifications and Main Features
Make – Tecumseh Cylinders – 1 Cycles – 4 Crankshaft – Horizontal
Model No: Refer to engine I.D. plate Type Refer to engine I.D. plate
5 HP – Bore and Stroke: 2-Ken Punch Ratio: (71.44 mm) x 1- 15/16 In. 49.23 mm
5 HP Spray Displacement: 12.04 Cu. In (197.34 cc) 7 HP – Bore And Stroke: 2-3/4 Sprays And Punch Ratio 69.86 mm x 2-17/32 in 64.31 mm
7 HP Spray Displacement 15.04 Cu. In. (246.5 cc) Ignition system Magneto Governor Mechanical Choke Manual lubrication.
Oiling system splash system Oil Capacity: Refer to engine manual Fuel Capacity: Refer to engine manual
- Drive
Category – gear drive transmission with chain and speed selection types
Speeds: 3 Forward 1 Reverse Axle: Solid Tires: 4.10/3.50-6 Turf Saver Pneumatic Tire
- Impeller
Construction 4 Steel Blades
Diameter 10 In 25.4cm
Bearings Prelubricated and sealed ball bearing
- Auger
Construction ribbed flight welded steel
Bearings: Ultra High Molecular Weight Polyethylene
- Blower Housing:
Construction welded steel stampings Auger Opening Height 14 In 35 mm
- Spout - Rotates 186° with the deflector to be moved or changed
- Scraper Bar - Built with wear resistant steel
- Skid Shoes - Steel that has been heated and treated adjustable.
- Auger and Impeller Drive
- Type- Cushion V belt and a housing with a worm gear.
- Overall Dimensions and Weight:
- Length- 51 inches/ 130 cm
- Width- 24 inches/ 60.96 cm
- Height- 43 1/2 inches/ 110 cm
- Weight:
- 5 HP- 158 lbs/ 72kg
- 7 HP- 178lbs/ 80kg
Frequently Asked Questions
- Q: What fuel should the user of a snow thrower select?
- A: Clean unfettered gasoline can be used or 91 fuel.
- Q: How can I set the snow thrower for diverse snow conditions?
- A: The chute can be moved along and the shift lever can be altered to choose snow that is minimal in depth or there could be a change in the speed. This could be done to suit varying snow conditions.
- Q: The snow thrower does not turn on, should I do something else?
- A: A spark plug that is defective or blocked fuel lines could be problems. Also the status of the choke could be checked along with the fuel in the tank.
- Q: What would be the recommended way to take care of my snowthrower during the off season?
- A: Maintenance practices consist of removing fuel, adding lubrication to specific parts, and securing the machine in a suitable shelter.
- Q: For how long am I covered in the warranty for my snowthrower?
- A: Your order should contain warranty information alongside service policies, which typically depend on the type of equipment.
User Manual
Loading...