Simplicity 696 User Manual
Specifications and Main Features
- Moderate Effective Working Width: 48”
- Average Till Depth Achievable: Up to 305 pounds if multiple passes are engaged
- Tine Clusters’ Quantity Capability: 7 (Including four replaceable tines)
- Usage Basis Of Drive: Tractor rear PTO
- Method Of Delivering Energy: Universal double-joint driveshaft cut bevel gears, cross shafts connected slip clutch, two-stage hyper-sturdy sprockets Roller chain No. 50, and 60 gauge.
- Spindle: And ball bearing types with grease fitting.
- Rotation Speed: 200rpm at all full engine power.
- Weight: 305 pounds, approximately.
Frequently Asked Questions
Q: Could Ye Me Know Which Is the Effective Width Of The Simplicity 48” Rotary Tiller?
A: Yes, sure, as I am telling you, it comes with active widths of 48 inches.
Q: How Deep A Till? Is There A Limit When Using This Rotary Tiller?
A: Yes, a depth of around 8 inches would do but this requires quite a lot of passes.
Q: What Is The Type Of The Drive That Rotary Tiller Uses?
A: Pretty simple answer, it uses tractor rear power take-off (PTO) drives.
Q: The Tiller Has 4 Replaceable Rotary Tines For Each Rotary Cluster. How Many Tine Clusters Does It Have?
A: Seven clusters come combined for the tines since it can manage to sustain 4 tp vertical rotational motion.
Q: Give Us An Approximate Weight Of The Tiller?
A: Based on their construction it usually weighs up to 305 pounds roughly.
Q: What is the tine shaft speed of the rotary tiller in full engine speed?
A: Tine shaft rotational speed is 200rpm/60sec while the engine runs on its full speed of RPM 200.
User Manual
Loading...