Simplicity 5900764, 5900762 User Manual
Parts Manual
g
Citation
Series Zero-Turn Riders & Mower Decks
25HP Product
. No. Description
Mf
5900762 Citation, 25HP Kawasaki Zero Turn Rider w/52" Mower
28HP Product
Mfg. No. Description
5900764 Citation, 28HP Briggs & Stratton Zero Turn Rider w/61"
Mower
Rev.
5101606
9/2008
Part No.:
TP 400-7405-D-CI-S
Table Of Content
s
PRODUCT COMPONENTS PAGES
Main Frame & Front Suspension Group ..............................................................................................................
Rear Bumper Group .............................................................................................................................................
Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models ....................................................
Engine & PTO Group - 25HP Kawasaki ..............................................................................................................
Engine & PTO Group - 28 HP Briggs & Stratton Models .....................................................................................
Instrument Control Panel Group ..........................................................................................................................
Pump Drive Group ...............................................................................................................................................
Motion Control Group - 28 HP Briggs & Stratton Models ....................................................................................
Motion Control Group - S/N: 201317251 & Above ..............................................................................................
Hydraulic Group ...................................................................................................................................................
Hydraulic Group - 28 HP Briggs & Stratton Models .............................................................................................
Hydraulic Mount Group ........................................................................................................................................
Hydraulic Mount Group - 28 HP Briggs & Stratton Models .................................................................................
Electrical Group - 25HP Kawasaki .......................................................................................................................
Electrical Group - 28 HP Briggs & Stratton ..........................................................................................................
Seat, Mount & Floor Group ..................................................................................................................................
Seat, Mount & Floor Group - 28 HP Briggs & Stratton Models ...........................................................................
Fuel Supply Hose Group & Tank Replacement Parts Group ..............................................................................
Fuel Tank & Mount Group ....................................................................................................................................
Fuel Tank & Mount Group - 28 HP Briggs & Stratton Models .............................................................................
Parking Brake Group ............................................................................................................................................
Parking Brake Group - 28 HP Briggs & Stratton Models .....................................................................................
Rear Suspension Group ......................................................................................................................................
Rear Suspension Group - 28 HP Briggs & Stratton Models ................................................................................
Deck Lift Group - 28 HP Briggs & Stratton Models ..............................................................................................
Deck Lift Group - S/N: 2013202961 & Below ......................................................................................................
Deck Lift Group - S/N: 2013202962 & Above ......................................................................................................
Wheel & Tire Group .............................................................................................................................................
Decals - Brand & Model .......................................................................................................................................
Decals - Safety & Operation ................................................................................................................................
Spindle Service Group .........................................................................................................................................
48" & 52" Mower Deck - Hanger Chains ..............................................................................................................
48" & 52" Mower Deck - Housing, Cover, Spindle & Blade .................................................................................
48" & 52" Mower Deck - Pulleys, Belts & Idler Arm .............................................................................................
48" & 52" Mower Deck - Rollers ...........................................................................................................................
61" Mower Deck - Hanger Chains .......................................................................................................................
61" Mower Deck - Housing, Covers, Spindles & Blades Group ..........................................................................
61" Mower Deck - Pulleys, Belts & Idler Arm .......................................................................................................
61" Mower Deck - Rollers & Casters ...................................................................................................................
61" Mower Deck - Striping Roller Bar ..................................................................................................................
10
12
14
16
18
22
26
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
62
66
70
72
74
76
78
80
82
84
86
88
90
92
94
Torque Specification Chart ..................................................................... Inside Back Cover
4
6
8
Main Frame & Front Suspension Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301427
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
4
TP 400-7405-D-CI-S
Main Frame & Front Suspension Group
PART NO. DESCRIPTIONREF NO. QTY.
SEAL, GREASE 1 5021072SM 2
SCREW, 5/16-18 X 1 FLAT HD SC 2 5025303SM 8
NUT, 5/16-18 HEX NYLON LOCK 3 5025057SM 8
WASHER, 3/8 FENDER (52" MODEL USES QTY. 6) 4 5025165SM 4
WASHER, 3/8 SAE 5 5025156SM 4
BOLT, 3/8-16 X 1-3/4 GD5 6 5025013X14SM 2
NUT, 3/8-16 HEX NYLOCK FLANGE 7 5025394SM 4
BOLT, 3/8-16 X 4 GD5 YZ 8 5025013X32SM 2
BOLT, 3/4-16 X 6-1/2 YZ GD5 9 5025265X52SM 1
WASHER, 3/4 SAE (52" MODEL USES QTY. 4) 10 5025160SM 2
NUT, 3/4-16 HEX NYLON LOCK 11 5025284SM 1
SHOCK, SPRING ASSEMBLY 12 5023483SM 2
WELD, CASTER YOKE -ORG 13 5402208CSM 2
BEARING, TAPERED ROLLER, 1 14 5020884SM 4
WELD, PIVOTING FRONT END - ORG (61" MODEL ONLY) 15 5403810CSM 1
SPACER, .75 X 1.00 X 2.38 16 5047489SM 1
PIVOT BEARING, 1.00 X 1.125 OD X 1.50 17 5022852SM 1
PIVOT BEARING, 1.00 X 1.125 OD X .50 18 5100358SM 1
CAP, CASTER SPINDLE, LOW PROFILE 19 5100882SM 2
DECK FRICTION REDUCER PLATE (61" MODEL ONLY) 20 5101553SM 2
WELD, MAIN FRAME, IS1500ZX - ORG (61" MODEL ONLY) 21 5403809CSM 1
WASHER, BELLEVILLE - 1.500 X .755 22 5025449SM 4
NUT, 3/4-16, HEX JAM NYLON LOCK 23 5025448SM 2
BEARING CUP (SV) 24 5020883SM 4
BOLT, 1/4-28 X 1/2, GD5 YZ 25 5025457SM 2
DECK FRICTION REDUCER PLATE (52" MODEL ONLY) 26 5045990SM 2
WELD, FRONT PIVOT, CITATION - ORG (52" MODEL ONLY) 27 5402536CSM 1
WELD, IS1500Z MAIN FRAME - ORANGE (52" MODEL ONLY) 28 5404316CSM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
5
TP 400-7405-D-CI-S
Rear Bumper Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287bmp1
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
6
TP 400-7405-D-CI-S
Rear Bumper Group
PART NO. DESCRIPTIONREF NO. QTY.
MAIN FRAME 1- HEAT SHIELD 2 5401174CSM 1
BUMPER 3 5403268CSM 1
PLATE, SEAT BELT ANCHOR - LH 4 5400844CSM 1
PLATE, SEAT BELT ANCHOR - RH 5 5400847CSM 1
WASHER, 1/2" SAE 6 5025158SM 4
NUT, 1/2-13 HEX NYLOCK FLANGE 7 5025396SM 6
BOLT, 1/2-13 X 3-1/4" GD5 8 5025017X26SM 4
CARB PROTECTOR PLATE 9 5061725CSM 1
PLUG, PANEL, 1.25 BLACK 10 5023484SM 6
ROLL BAR TOP LOOP 11 - 1
ROLL BAR POST, RH 12 - 1
ROLL BAR POST, LH 13 - 1
WASHER 3/8" SAE 14 5025156SM 2
BOLT, 3/8-16 X 1" GD5 15 5025013X8SM 2
NUT, 3/8-16 X 1" GD5 16 5025394SM 2
BOLT, 5/16-18 X 3/4" GD5 17 5025011X6SM 4
NUT, 5/16-18 HEX NYLOCK FLANGE 18 5025392SM 4
BOLT, 1/2-13 X 1-3/4 GD5 YZ 19 5025017X14SM 2
NUT, 1/2 X 13 HEX NYLOCK FLANGE 20 5025396SM 2
SEAT BELT ASSEMBLY, STANDARD 21 5100139SM 1
SEAT BELT ASSEMBLY, EXTRA LONG 21 5100397SM 1
ROLL BAR HARDWARE BAG 22 5100377SM 1
PIN, HITCH, BLACK W/ PLASTIC LANYARD 23 5100079SM 2
RUBBER BUMPER 24 5100383SM 2
SCREW, 1/2-13 X 1.00, SHCS 25 5100267SM 2
*BOLT 26 - 2
*NUT 27 - 2
ROPS COMPLETE IN BOX, IS1500 28 5100186SM 1
WASHER, 5/16"SAE 29 5025155SM 4
SPACER, .52 X 1.00 X .75 30 5045178SM 1
SPACER, .515 X 1.00 X .218 31 5100520SM 1
CAP, VINYL 32 5101049SM 1
RUBBER WASHER (Not shown) 33 5100545SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
7
TP 400-7405-D-CI-S
Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301428
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
8
TP 400-7405-D-CI-S
Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models
PART NO. DESCRIPTIONREF NO. QTY.
PLUG, PANEL, 1.25 - BLACK 1 5023484SM 6
PLATE, HEAT SHIELD - ORG 2 5402183CSM 1
WASHER, 5/16 SAE 3 5025155SM 4
BOLT, 5/16-18 X 3/4 GD5 4 5025011X6SM 4
NUT, 5/16-18 HEX NYLOCK FLANGE 5 5025392SM 4
WASHER, 3/8 SAE 6 5025156SM 2
BOLT, 3/8-16 X 1 GD5 YZ 7 5025013X8SM 2
NUT, 3/8-16 HEX NYLOCK FLANGE 8 5025394SM 2
PLATE, CARB PROTECTOR - ORG 9 5400681CSM 1
WELD, BUMPER, IS2000Z - ORG 10 5403269CSM 1
PIN, HITCH, BLACK W/ PLASTIC LANYARD 11 5100079SM 2
ROLL BAR HARDWARE BAG (Includes hitch pin.) 12 5100377SM 1
WASHER, 1/2 SAE 13 5025158SM 6
BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, YZ 14 5025017X26SM 4
NUT, 1/2-13 HEX NYLOCK FLANGE 15 5025396SM 6
ROPS COMPLETE IN BOX, IS2000 16 5100190SM 1
PLATE, SEAT BELT ANCHOR - LH - ORG 17 5400844CSM 2
SCREW, 1/2-13 X 1.00, SHCS 18 5100267SM 2
NUT, 1/2-20 HEX NYLON LOCK 19 5025098SM 2
SEAT BELT, RETRACTING - ASSM 20 5100139SM 1
ROLL BAR TOP LOOP (See drawing note.) 21 - 1
ROLL BAR POST, RH (See drawing note.) 22 - 1
ROLL BAR POST, LH (See drawing note.) 23 - 1
RUBBER BUMPER 24 5100383SM 2
*BOLT (See footnote.) 25 - 2
*NUT (See footnote.) 26 - 2
RUBBER WASHER 27 5100545SM 2
BOLT, 1/2-20 X 1-1/4 GD5 YZ 28 5025018X10SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
9
TP 400-7405-D-CI-S
Engine & PTO Group - 25HP Kawasaki
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301420
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
10
TP 400-7405-D-CI-S
Engine & PTO Group - 25HP Kawasaki
PART NO. DESCRIPTIONREF NO. QTY.
ENGINE, 25HP Kawi, FH721-FS11-R 1- 1
SPACER, 1.13 X 1.75 X .32 2 5100062SM 1
KEY, 1/4 SQ. X 3-1/2" LONG 3 5050407X8SM 1
PULLEY, Crankshaft (Double A) 4 5047075SM 1
CLUTCH, 5218-134, Warner 5 5100084SM 1
SPACER, .45 X 1.88 X .38 6 5045475SM 1
BOLT, Crankshaft, 7/16 X 2-3/4 7 5047632SM 1
MUFFLER, 21HP-25HP Kawasaki Engines 8 5100975SM 1
HOSE, Oil Drain 9 5048681SM 1
BOLT, 5/16-18 X 1 GD5 YZ 10 5025011X8SM 4
NUT, 5/16-18 HEX SERRATTED FLANGE 11 5025057SM 4
SCREEN, SPARK ARRESTER (NOT SHOWN) 12 5101641SM 1
ANCHOR, Clutch 13 5046416CSM 1
CLUTCH ANCHOR PAD 14 5043636SM 1
GROMMET, 7/8 15 5021379SM 1
SPACER, .39 X 1.00 X .80 16 50446446SM 2
BOLT, 5/16-18 X 1-3/4 GD5 YZ 17 5025011X14SM 4
WASHER, 5/16 SAE 18 5025155SM 10
WASHER, 5/16 Internal Tooth Lock Washer 19 5025188SM 4
NUT, 5/16-18 Hex Nylock Flange 20 5025392SM 8
WASHER, .34 X 1.25 X 10 GA 21 5044617SM 4
BOLT, 5/16-18 X 1-1/2 GD5 YZ 22 5025011X12SM 2
BOLT, 5/16-18 X 3, FLT 23 5025425SM 1
ADAPTER, Oil Drain 24 5022234SM 1
NUT, 5/16-18 Hex Serratted Flange 25 5025139SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
11
TP 400-7405-D-CI-S
Engine & PTO Group - 28 HP Briggs & Stratton Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301439
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
12
TP 400-7405-D-CI-S
Engine & PTO Group - 28 HP Briggs & Stratton Models
PART NO. DESCRIPTIONREF NO. QTY.
ENGINE, 28HP, BRIGGS AND STRATTON 1- 1
BOLT, 5/16-18 X 1-3/4 GD5 YZ 2 5025011X14SM 4
ANCHOR, CLUTCH 3 5046416CSM 1
NUT, 5/16-18 HEX SERRATED FLANGE, LARGE 4 5025139SM 3
CLUTCH ANCHOR PAD 5 5043636SM 1
WASHER, .34 X 1.25 X 10 GA 6 5044617SM 4
NUT, 5/16-18 HEX NYLOCK FLANGE 7 5025392SM 6
WASHER, 5/16 SAE 8 5025155SM 2
BOLT, CRANKSHAFT, 7/16" X 2-1/2 9 5045289SM 1
METRIC ADAPTER, M14-1.5" TO 3/8 NPTF 10 5100366SM 1
CLUTCH,5218-134, WARNER 11 5100084SM 1
WASHER, 5/16" INT. TOOTH LOCK 12 5025188SM 4
SPACER, 1.13 X 1.75 X .50 13 5044062SM 1
PULLEY, CRANKSHAFT (DOUBLE A) 14 5047075SM 1
KEY, 1/4 SQ. X 1.00 15 5050407X8SM 1
SPACER, 1.13 X 1.75 X 1.090, BLACK ZINC 16 5101554SM 1
WASHER, 5/16" LOCK 17 5025170SM 4
BOLT, 5/16-18 X 3", FLT 18 5025425SM 1
BOLT, 1/4-20 X 1", GD5 19 5025010X8SM 1
GROMMET, 7/8 20 5021379SM 1
CLAMP, VINYL 21 5021500SM 1
HOSE, OIL DRAIN 22 5048681SM 1
BOLT, 3/8-16 X 1 GD5 YZ 23 5025013X8SM 2
WASHER, 3/8 SAE 24 5025156SM 2
NUT, 3/8-16 HEX NYLOCK FLANGE 25 5025394SM 2
NUT, 1/4-20 HEX NYLOCK FLANGE 26 5025391SM 1
MUFFLER, EXHAUST ASSY 27 843906SM 1
BOLT, 5/16-18 X 1 GD5 YZ 28 5025011X8SM 2
ELEMENT, AIR CLEANER, SECONDARY (Not Shown) 29 841238SM 1
RAIN CAP (Not Shown) 30 809268SM 1
AIR CLEANER ASSEMBLY, COMPLETE (Not Shown) 31 809218SM 1
ELEMENT, AIR CLEANER, PRIMARY (Not Shown) 32 841237SM 1
FILTER, OIL, BRIGGS & STRATTON (Not Shown) 33 492932SSM 1
SCREEN, ARRESTER (Not Shown) 34 842859SM 1
SCREW,SELF-TAP,#8-32 X 3/8,WASH HEX, CZ (Not Shown) 35 5025470SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
13
TP 400-7405-D-CI-S
Instrument Control Panel Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301287
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
14
TP 400-7405-D-CI-S
Instrument Control Panel Group
PART NO. DESCRIPTIONREF NO. QTY.
RING, SWITCH RETAINER 1 5022222SM 1
NUT, 3/8-24 HEX JAM (SV) 2 5025309SM 1
SWITCH, HEADLIGHT 3 1703799SM 1
SCREW, 1/4-20 X 1/2 ALLEN BH 4 5025299X4SM 3
WASHER, #10 SAE 5 5023499SM 4
SPACER, .20 X .38 X 1.25 6 5061763SM 2
SWITCH, IGNITION, 6 POST (Includes Ref Nos 21 - 23) 7 5020927SM 1
CABLE, CHOKE CONTROL, 51 (Z) (Includes Ref Nos 2) (61" Model Only) 8 5047779SM 1
SWITCH, BLADE ENGAGEMENT 9 5022180SM 1
CABLE, THROTTLE, 47" (61" Model Only) 10 5101076SM 1
HOUR METER, W/ SUPRESSOR 11 5100996SM 1
FUSE, ATO, 20 AMP 12 5021603SM 4
O-RING, 7/8 ID X 1/16 W 13 5022269SM 1
PLATE, CONTROL PANEL - BLK 14 5403402ASM 1
LEVER, THROTTLE CONTROL 15 5101537SM 1
COVER, VINYL FUSEBLOCK 16 5022805SM 1
KNOB, THROTTLE CONTROL (SV) 17 5046360X1SM 1
SCREW, #10-24 X 3/4" ROUND PHILLIPS 18 5025179X6SM 2
NUT, #10-24 HEX NYLON LOCK 19 5025271SM 4
SCREW, #10-24 X 2" 20 5025270X16SM 2
KIT, IGNITION, SET (SV) 21 5022789SM 1
COVER (SV) 22 5022790SM 1
PLASTIC NUT (SV) 23 5022791SM 1
FUSE BLOCK (SV) 24 5021518SM 1
CABLE, CHOKE CONTROL, 47 (Includes Ref Nos 2) (52" Model Only) 25 5046501SM 1
CABLE, THROTTLE, 42" (52" Model Only) 26 5101073SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
15
TP 400-7405-D-CI-S
Pump Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301430
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
16
TP 400-7405-D-CI-S
Pump Drive Group
PART NO. DESCRIPTIONREF NO. QTY.
NUT, 3/8-16 HEX SERRATED FLANGE 1 5025128SM 4
KEY, 5MM SQ. W/ RADIUS 2 5023254SM 2
BOLT, 1/4-20 X 1, GD5 3 5025010X8SM 4
BOLT, 3/8-16 X 1-1/4" GD5 4 5025013X10SM 4
NUT, 3/8-16 HEX NYLOCK FLANGE 5 5025394SM 3
BELT,#41-1299, BANDED -EL 64.76 (pair) 6 5100555SM 1
BOLT, 3/8-16 X 2-1/4 GD5 YZ 7 5025013X18SM 1
WELD, ARM, PUMP DRIVE IDLER - ORG 8 5046430CSM 1
BOLT, 3/8-16 X 1-3/4 GD5 9 5025013X14SM 1
NUT, 3/8-16 HEX SIDE LOCK 10 5025100SM 1
NUT, 3/8-16 HEX 11 5025034SM 2
SPRING, EXTENSION, SWIVEL END 12 5022847SM 1
EYE BOLT, 3/8-16 X 4-1/4, 1 EYE 13 5021812SM 1
PULLEY, PUMP DRIVE 14 5022586SM 2
BUSHING, TAPERED HUB 15 5022587SM 2
PULLEY, IDLER, SINGLE FLANGE 16 5022621SM 1
BUSHING, BRASS, 1.25X1X1.25 17 5022157SM 2
SPACER, .39 X 1.00 X 2.55 18 5045135SM 1
SPACER, .45 X 1.88 X .38 19 5045475SM 1
WASHER, .41 X 1.75 X .14 20 5025305SM 1
BOLT, 3/8-16 X 4 GD5 YZ 21 5025013X32SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
17
TP 400-7405-D-CI-S
Motion Control Group - 28 HP Briggs & Stratton Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301431
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
18
TP 400-7405-D-CI-S
Motion Control Group - 28 HP Briggs & Stratton Models
PART NO. DESCRIPTIONREF NO. QTY.
WASHER, 3/8 SAE 1 5025156SM 6
BOLT, 3/8-16 X 1 GD5 YZ 2 5025013X8SM 2
NUT, 3/8-16 HEX NYLOCK FLANGE 3 5025394SM 10
BEARING, BRONZE FLANGE, 3/4 4 5021098SM 2
BALL JOINT, 5/16-24, LH FEMALE 5 5022628SM 2
ROD, HYDRO LINKAGE 6 5046420SM 2
MOUNT, REVERSE RETURN - ORG 7 5400653CSM 2
BOLT, 1/4-20 X 3/4 GD5 YZ 8 5025010X6SM 4
WASHER, 1/4 SAE 9 5025154SM 4
NUT, 1/4-20 HEX NYLOCK FLANGE 10 5025391SM 4
SPRING, REVERSE RETURN 11 5022645SM 2
BUSHING, NYLON 12 5023260SM 2
NUT, 5/16-24 HEX, LH 13 5023212SM 2
NUT, 5/16-24 HEX 14 5025033SM 6
COLLAR, 5/16 SET 15 5020047SM 2
WASHER, 5/16 SAE 16 5025155SM 8
BOLT, 5/16-18 X 1-1/4 GD5 YZ 17 5025011X10SM 4
PLATE, HAND GUARD, LH - ORG 18 5403956CSM 1
BOLT, 5/16-18 X 1-1/8 GD5 19 5025011X9SM 2
BALL JOINT, 5/16-24, FEMALE 20 5021146SM 2
SPACER, .39 X .63 X 1.50 21 5048264SM 6
BOLT, 3/8-16 X 2-1/2 GD5 YZ 22 5025013X20SM 4
BOLT, 3/8-16 X 3 GD5 YZ 23 5025013X24SM 2
BOLT, 3/8-16 X 1-1/4 GD5 24 5025013X10SM 2
BEARING, FLANGE 25 5021499SM 2
NUT, 3/8-16 HEX NYLON LOCK 26 5025096SM 4
BOLT, 5/16-18 X 1-3/4 GD5 TFL 27 5025055X14SM 4
NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 28 5025139SM 12
BOLT, 3/8-16 X 1-3/4 GD5 29 5025013X14SM 4
WELD, CONTROL SHAFT, RH - ORG 30 5403620CSM 1
WELD, CONTROL SHAFT, LH - ORG 31 5403619CSM 1
WELD, NEUTRAL LOCK, LH - ORG 32 5400820CSM 1
WELD, NEUTRAL LOCK, RH - ORG 33 5400824CSM 1
BOLT, 5/16-18 X 1 GD5 YZ 34 5025011X8SM 4
SWITCH, PLUNGER, N.O. 35 5021451SM 2
SCREW, #10-24 X 1/2 ROUND PHILLIPS 36 5025179X4SM 4
NUT, #10-24 HEX 37 5025029SM 4
PLATE, HAND GUARD, RH - ORG 38 5403597CSM 1
10MM BALL STUD, 5/16-18 X 3/4 THDS 39 5101307SM 4
WASHER, 5/16 LOCK YZ 40 5025170SM 4
WELD, HANDLE MOTION CONTROL RH - ORG 41 5400637CSM 1
MOUNT, CONTROL ARM 42 5047004SM 2
GRIP, FOAM, 3/4 ID, 16 LONG 43 5022068SM 2
WELD, HANDLE MOTION CONTROL LH - ORG 44 5400636CSM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
19
TP 400-7405-D-CI-S
Motion Control Group - 28 HP Briggs & Stratton Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301431
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
20
TP 400-7405-D-CI-S
Motion Control Group - 28 HP Briggs & Stratton Models
PART NO. DESCRIPTIONREF NO. QTY.
WASHER, 3/8 X 1" X 1/16, NYLON F/W 45 5025424SM 2
NUT, 5/16-18 HEX NYLOCK FLANGE 46 5025392SM 8
DAMPENER, CONTROL,#(P6709/P3610) 47 5100940SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
21
TP 400-7405-D-CI-S
Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301479
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
22
TP 400-7405-D-CI-S
Motion Control Group - S/N: 201317251 & Above
PART NO. DESCRIPTIONREF NO. QTY.
ROD, NEUTRAL RETURN 1 5100947SM 2
SPRING, REVERSE RETURN 2 5022645SM 2
BUSHING, NYLON 3 5023260SM 2
BUSHING, FLANGED .375 X .630 X 2.00 4 5100942SM 2
COLLAR, 3/8" SET 5 5010546SM 4
WASHER, 3/8 SAE 6 5025156SM 12
PIN, HAIR, .0915 X 1-7/8 7 5025210SM 2
BALL STUD, 5/16 X .50,# PC-477-2) 8 5100941SM 4
DAMPENER, CONTROL,#(P6709/P3610) 9 5100940SM 2
NUT, 5/16-18 HEX NYLOCK FLANGE 10 5025392SM 8
ROD, HYDRO LINKAGE 11 5100946SM 2
NUT, 5/16-24 HEX, LH 12 5023212SM 2
BALL JOINT, 5/16-24, LH FEMALE 13 5022628SM 2
WELD, SHAFT MOTION CONTROL-RH-IS500-ORG 14 5402589CSM 1
BOLT, 5/16-18 X 1 GD5 YZ 15 5025011X8SM 6
WASHER, 5/16" SAE 16 5025155SM 8
BOLT, 5/16-18 X 1-1/4" GD5 YZ 17 5025011X10SM 2
BALL JOINT, 5/16-24, FEMALE 18 5021146SM 2
NUT, 5/16-24 HEX 19 5025033SM 6
BEARING, BRONZE FLANGE, 3/4 20 5021098SM 2
BOLT, 3/8-16 X 1" GD5 YZ 21 5025013X8SM 2
NUT, 3/8-16 HEX NYLOCK FLANGE 22 5025394SM 14
BEARING, FLANGE 23 5021499SM 2
BOLT, 3/8-16 X 1-1/4" GD5 24 5025013X10SM 2
NUT, 3/8-16 HEX NYLON LOCK 25 5025096SM 4
BOLT, 3/8-16 X 1-3/4" GD5 26 5025013X14SM 8
MOUNT, CONTROL ARM 27 5047004SM 2
WELD, NEUTRAL LOCK - RH - IS500-ORG 28 5402595CSM 1
WELD, NEUTRAL LOCK - LH - IS500-ORG 29 5402594CSM 1
SWITCH, PLUNGER, N.O./N.C. 30 5022095SM 2
SCREW, #10-24 X 1/2 ROUND PHILLIPS 31 5025179X4SM 4
NUT, #10-24 HEX 32 5025029SM 4
BOLT, 5/16-18 X 1-1/8" GD5 33 5025011X9SM 2
NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 34 5025127SM 8
BOLT, 3/8-16 X 2-1/2" GD5 YZ 35 5025013X20SM 4
SPACER, .39 X .63 X 1.50 36 5048264SM 6
BOLT, 3/8-16 X 3" GD5 YZ 37 5025013X24SM 2
WELD, HANDLE MOTION CONTROL-LH 38 5047055CSM 1
WELD, HANDLE MOTION CONTROL-RH 39 5047056CSM 1
WASHER, 5/16" LOCK 40 5025170SM 4
GRIP, FOAM, 3/4 ID, 16 LONG 41 5022068SM 2
GUARD, RUBBER MOT CTRS - IS500Z 42 5100948SM 2
PUSH RIVET (TREE TYPE), BLACK 43 5025431SM 4
SPRING, EXTENSION 44 5020639SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
23
TP 400-7405-D-CI-S
Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301479
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
24
TP 400-7405-D-CI-S
Motion Control Group - S/N: 201317251 & Above
PART NO. DESCRIPTIONREF NO. QTY.
WELD, SHAFT MOTION CONTROL-LH-IS500-ORG 45 5402588CSM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
25
TP 400-7405-D-CI-S
Hydraulic Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287hyd0
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
26
TP 400-7405-D-CI-S
Hydraulic Group
PART NO. DESCRIPTIONREF NO. QTY.
CAP, Hydraulic Oil Only 1 5100017SM 1
HYDRAULIC OIL RESERVOIR, Complete 2 5061712SM 1
FITTING, Elbow, 3/8" 3 5023118SM 1
GROMMET 4 1726400SM 1
GROMMET 5 5023121SM 1
FITTING, Elbow, 5/8" 6 5023119SM 1
CLAMP, #10 Hose 7 5021164SM 2
HOSE, Hydraulic, 24.5" 8 5050933X24P5SM 1
CLAMP, #4 Hose 9 5022922SM 1
HOSE, Hydraulic, 18.5" 10 5050860X18P5SM 1
CLAMP, Hose 11 5023268SM 11
HYDRAULIC HOSE ASSEMBLY, 25" 12 5023370SM 2
HYDRAULIC HOSE ASSEMBLY, 21" 13 5022711SM 2
FITTING, O-Ring Adapter 14 5022633SM 2
FITTING, O-Ring, 90 Deg. 15 5022599SM 2
HYDRAULIC WHEEL MOTOR, Complete (S/N: 2012607199 & BELOW) 16 5023316SM 2
KEY 17 5022042X2SM 2
NUT, CASTLE 18 5022042X3SM 2
HOSE, Hydraulic, 18" 19 5050860X18SM 1
FITTING, O-Ring, 45 Deg. 20 5023338SM 4
FITTING, O-Ring, 90 Deg. 21 5023267SM 2
FITTING, TEE, 3/8" Hose 22 5022920SM 2
FITTING, O-Ring, 90 Deg. 23 5023346SM 1
FITTING, O-Ring, 45 Deg. 24 5023461SM 3
FILTER HEAD 25 5023096SM 1
FILTER 26 1719168SM 1
HOSE, Hydraulic, 6-1/2" 27 5050860X6P5SM 2
HYDRAULIC PUMP, RH (S/N: 2012607199 & BELOW) 28 5023373SM 1
FAN SHROUD (S/N: 2012607199 & BELOW) 28 5023371SM 1
FAN, HYD. PUMP 28 5100333SM 1
HYDRAULIC PUMP, LH (S/N: 2012607199 & BELOW) 29 5023372SM 1
FAN SHROUD (S/N: 2012607199 & BELOW) 29 5023371SM 1
FAN, HYD. PUMP 29 5100333SM 1
HOSE, Hydraulic, 6" 30 5050860X6SM 2
NUT, 3/8-16 Hex Serrated Flange 31 5025128SM 4
BOLT, 3/8-16 X 1-1/4" 32 5025013X10SM 4
BOLT, 1/4"-20 X 3/4" 33 5025010X6SM 2
WASHER, 1/4" LOCK 34 5025169SM 2
WASHER, 1/4" SAE 35 5025154SM 2
PIN, COTTER 36 5025203X16SM 2
WHEEL MOTOR, COMPLETE (S/N: 2012607200 & ABOVE) 37 5100877SM 2
HYDRAULIC PUMP, LH (S/N: 2012607200 & ABOVE) 38 5100670SM 1
FAN SHROUD (S/N: 2012607200 & ABOVE) 38 5100162SM 1
HYDRAULIC PUMP, RH (S/N: 2012607200 & ABOVE) 39 5100671SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
27
TP 400-7405-D-CI-S
Hydraulic Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287hyd0
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
28
TP 400-7405-D-CI-S
Hydraulic Group
PART NO. DESCRIPTIONREF NO. QTY.
FAN SHROUD (S/N: 2012607200 & ABOVE) 39 5100162SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
5900762 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
29
TP 400-7405-D-CI-S
Hydraulic Group - 28 HP Briggs & Stratton Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301275
The above parts group applies to the following Mfg. Nos.:
5900764 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
30
TP 400-7405-D-CI-S
Loading...