Simplicity 5900764, 5900762 User Manual

Download

Parts Manual

Citation

Series Zero-Turn Riders & Mower Decks

25HP Product

. No. Description

5900762 Citation, 25HP Kawasaki Zero Turn Rider w/52" Mower

28HP Product

Mfg. No. Description

5900764 Citation, 28HP Briggs & Stratton Zero Turn Rider w/61"

Mower

Rev.

5101606

9/2008

Part No.:

TP 400-7405-D-CI-S

Table Of Content

PRODUCT COMPONENTS PAGES

Main Frame & Front Suspension Group ..............................................................................................................

Rear Bumper Group .............................................................................................................................................

Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models ....................................................

Engine & PTO Group - 25HP Kawasaki ..............................................................................................................

Engine & PTO Group - 28 HP Briggs & Stratton Models .....................................................................................

Instrument Control Panel Group ..........................................................................................................................

Pump Drive Group ...............................................................................................................................................

Motion Control Group - 28 HP Briggs & Stratton Models ....................................................................................

Motion Control Group - S/N: 201317251 & Above ..............................................................................................

Hydraulic Group ...................................................................................................................................................

Hydraulic Group - 28 HP Briggs & Stratton Models .............................................................................................

Hydraulic Mount Group ........................................................................................................................................

Hydraulic Mount Group - 28 HP Briggs & Stratton Models .................................................................................

Electrical Group - 25HP Kawasaki .......................................................................................................................

Electrical Group - 28 HP Briggs & Stratton ..........................................................................................................

Seat, Mount & Floor Group ..................................................................................................................................

Seat, Mount & Floor Group - 28 HP Briggs & Stratton Models ...........................................................................

Fuel Supply Hose Group & Tank Replacement Parts Group ..............................................................................

Fuel Tank & Mount Group ....................................................................................................................................

Fuel Tank & Mount Group - 28 HP Briggs & Stratton Models .............................................................................

Parking Brake Group ............................................................................................................................................

Parking Brake Group - 28 HP Briggs & Stratton Models .....................................................................................

Rear Suspension Group ......................................................................................................................................

Rear Suspension Group - 28 HP Briggs & Stratton Models ................................................................................

Deck Lift Group - 28 HP Briggs & Stratton Models ..............................................................................................

Deck Lift Group - S/N: 2013202961 & Below ......................................................................................................

Deck Lift Group - S/N: 2013202962 & Above ......................................................................................................

Wheel & Tire Group .............................................................................................................................................

Decals - Brand & Model .......................................................................................................................................

Decals - Safety & Operation ................................................................................................................................

Spindle Service Group .........................................................................................................................................

48" & 52" Mower Deck - Hanger Chains ..............................................................................................................

48" & 52" Mower Deck - Housing, Cover, Spindle & Blade .................................................................................

48" & 52" Mower Deck - Pulleys, Belts & Idler Arm .............................................................................................

48" & 52" Mower Deck - Rollers ...........................................................................................................................

61" Mower Deck - Hanger Chains .......................................................................................................................

61" Mower Deck - Housing, Covers, Spindles & Blades Group ..........................................................................

61" Mower Deck - Pulleys, Belts & Idler Arm .......................................................................................................

61" Mower Deck - Rollers & Casters ...................................................................................................................

61" Mower Deck - Striping Roller Bar ..................................................................................................................

10 12 14 16 18 22 26 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 62 66 70 72 74 76 78 80 82 84 86 88 90 92 94

Torque Specification Chart ..................................................................... Inside Back Cover

4 6 8

Main Frame & Front Suspension Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301427

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Main Frame & Front Suspension Group

PART NO. DESCRIPTIONREF NO. QTY.

SEAL, GREASE 1 5021072SM 2 SCREW, 5/16-18 X 1 FLAT HD SC 2 5025303SM 8 NUT, 5/16-18 HEX NYLON LOCK 3 5025057SM 8 WASHER, 3/8 FENDER (52" MODEL USES QTY. 6) 4 5025165SM 4 WASHER, 3/8 SAE 5 5025156SM 4 BOLT, 3/8-16 X 1-3/4 GD5 6 5025013X14SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 7 5025394SM 4 BOLT, 3/8-16 X 4 GD5 YZ 8 5025013X32SM 2 BOLT, 3/4-16 X 6-1/2 YZ GD5 9 5025265X52SM 1 WASHER, 3/4 SAE (52" MODEL USES QTY. 4) 10 5025160SM 2 NUT, 3/4-16 HEX NYLON LOCK 11 5025284SM 1 SHOCK, SPRING ASSEMBLY 12 5023483SM 2 WELD, CASTER YOKE -ORG 13 5402208CSM 2 BEARING, TAPERED ROLLER, 1 14 5020884SM 4 WELD, PIVOTING FRONT END - ORG (61" MODEL ONLY) 15 5403810CSM 1 SPACER, .75 X 1.00 X 2.38 16 5047489SM 1 PIVOT BEARING, 1.00 X 1.125 OD X 1.50 17 5022852SM 1 PIVOT BEARING, 1.00 X 1.125 OD X .50 18 5100358SM 1 CAP, CASTER SPINDLE, LOW PROFILE 19 5100882SM 2 DECK FRICTION REDUCER PLATE (61" MODEL ONLY) 20 5101553SM 2 WELD, MAIN FRAME, IS1500ZX - ORG (61" MODEL ONLY) 21 5403809CSM 1 WASHER, BELLEVILLE - 1.500 X .755 22 5025449SM 4 NUT, 3/4-16, HEX JAM NYLON LOCK 23 5025448SM 2 BEARING CUP (SV) 24 5020883SM 4 BOLT, 1/4-28 X 1/2, GD5 YZ 25 5025457SM 2 DECK FRICTION REDUCER PLATE (52" MODEL ONLY) 26 5045990SM 2 WELD, FRONT PIVOT, CITATION - ORG (52" MODEL ONLY) 27 5402536CSM 1 WELD, IS1500Z MAIN FRAME - ORANGE (52" MODEL ONLY) 28 5404316CSM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Bumper Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287bmp1

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Bumper Group

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- HEAT SHIELD 2 5401174CSM 1 BUMPER 3 5403268CSM 1 PLATE, SEAT BELT ANCHOR - LH 4 5400844CSM 1 PLATE, SEAT BELT ANCHOR - RH 5 5400847CSM 1 WASHER, 1/2" SAE 6 5025158SM 4 NUT, 1/2-13 HEX NYLOCK FLANGE 7 5025396SM 6 BOLT, 1/2-13 X 3-1/4" GD5 8 5025017X26SM 4 CARB PROTECTOR PLATE 9 5061725CSM 1 PLUG, PANEL, 1.25 BLACK 10 5023484SM 6 ROLL BAR TOP LOOP 11 - 1 ROLL BAR POST, RH 12 - 1 ROLL BAR POST, LH 13 - 1 WASHER 3/8" SAE 14 5025156SM 2 BOLT, 3/8-16 X 1" GD5 15 5025013X8SM 2 NUT, 3/8-16 X 1" GD5 16 5025394SM 2 BOLT, 5/16-18 X 3/4" GD5 17 5025011X6SM 4 NUT, 5/16-18 HEX NYLOCK FLANGE 18 5025392SM 4 BOLT, 1/2-13 X 1-3/4 GD5 YZ 19 5025017X14SM 2 NUT, 1/2 X 13 HEX NYLOCK FLANGE 20 5025396SM 2 SEAT BELT ASSEMBLY, STANDARD 21 5100139SM 1 SEAT BELT ASSEMBLY, EXTRA LONG 21 5100397SM 1 ROLL BAR HARDWARE BAG 22 5100377SM 1 PIN, HITCH, BLACK W/ PLASTIC LANYARD 23 5100079SM 2 RUBBER BUMPER 24 5100383SM 2 SCREW, 1/2-13 X 1.00, SHCS 25 5100267SM 2 *BOLT 26 - 2 *NUT 27 - 2 ROPS COMPLETE IN BOX, IS1500 28 5100186SM 1 WASHER, 5/16"SAE 29 5025155SM 4 SPACER, .52 X 1.00 X .75 30 5045178SM 1 SPACER, .515 X 1.00 X .218 31 5100520SM 1 CAP, VINYL 32 5101049SM 1 RUBBER WASHER (Not shown) 33 5100545SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301428

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Bumper, Roll Bar & Seat Belt Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

PLUG, PANEL, 1.25 - BLACK 1 5023484SM 6 PLATE, HEAT SHIELD - ORG 2 5402183CSM 1 WASHER, 5/16 SAE 3 5025155SM 4 BOLT, 5/16-18 X 3/4 GD5 4 5025011X6SM 4 NUT, 5/16-18 HEX NYLOCK FLANGE 5 5025392SM 4 WASHER, 3/8 SAE 6 5025156SM 2 BOLT, 3/8-16 X 1 GD5 YZ 7 5025013X8SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 8 5025394SM 2 PLATE, CARB PROTECTOR - ORG 9 5400681CSM 1 WELD, BUMPER, IS2000Z - ORG 10 5403269CSM 1 PIN, HITCH, BLACK W/ PLASTIC LANYARD 11 5100079SM 2 ROLL BAR HARDWARE BAG (Includes hitch pin.) 12 5100377SM 1 WASHER, 1/2 SAE 13 5025158SM 6 BOLT, 1/2-13 X 3-1/4, HEX HD, GD5, YZ 14 5025017X26SM 4 NUT, 1/2-13 HEX NYLOCK FLANGE 15 5025396SM 6 ROPS COMPLETE IN BOX, IS2000 16 5100190SM 1 PLATE, SEAT BELT ANCHOR - LH - ORG 17 5400844CSM 2 SCREW, 1/2-13 X 1.00, SHCS 18 5100267SM 2 NUT, 1/2-20 HEX NYLON LOCK 19 5025098SM 2 SEAT BELT, RETRACTING - ASSM 20 5100139SM 1 ROLL BAR TOP LOOP (See drawing note.) 21 - 1 ROLL BAR POST, RH (See drawing note.) 22 - 1 ROLL BAR POST, LH (See drawing note.) 23 - 1 RUBBER BUMPER 24 5100383SM 2 *BOLT (See footnote.) 25 - 2 *NUT (See footnote.) 26 - 2 RUBBER WASHER 27 5100545SM 2 BOLT, 1/2-20 X 1-1/4 GD5 YZ 28 5025018X10SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Engine & PTO Group - 25HP Kawasaki

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301420

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Engine & PTO Group - 25HP Kawasaki

PART NO. DESCRIPTIONREF NO. QTY.

ENGINE, 25HP Kawi, FH721-FS11-R 1- 1 SPACER, 1.13 X 1.75 X .32 2 5100062SM 1 KEY, 1/4 SQ. X 3-1/2" LONG 3 5050407X8SM 1 PULLEY, Crankshaft (Double A) 4 5047075SM 1 CLUTCH, 5218-134, Warner 5 5100084SM 1 SPACER, .45 X 1.88 X .38 6 5045475SM 1 BOLT, Crankshaft, 7/16 X 2-3/4 7 5047632SM 1 MUFFLER, 21HP-25HP Kawasaki Engines 8 5100975SM 1 HOSE, Oil Drain 9 5048681SM 1 BOLT, 5/16-18 X 1 GD5 YZ 10 5025011X8SM 4 NUT, 5/16-18 HEX SERRATTED FLANGE 11 5025057SM 4 SCREEN, SPARK ARRESTER (NOT SHOWN) 12 5101641SM 1 ANCHOR, Clutch 13 5046416CSM 1 CLUTCH ANCHOR PAD 14 5043636SM 1 GROMMET, 7/8 15 5021379SM 1 SPACER, .39 X 1.00 X .80 16 50446446SM 2 BOLT, 5/16-18 X 1-3/4 GD5 YZ 17 5025011X14SM 4 WASHER, 5/16 SAE 18 5025155SM 10 WASHER, 5/16 Internal Tooth Lock Washer 19 5025188SM 4 NUT, 5/16-18 Hex Nylock Flange 20 5025392SM 8 WASHER, .34 X 1.25 X 10 GA 21 5044617SM 4 BOLT, 5/16-18 X 1-1/2 GD5 YZ 22 5025011X12SM 2 BOLT, 5/16-18 X 3, FLT 23 5025425SM 1 ADAPTER, Oil Drain 24 5022234SM 1 NUT, 5/16-18 Hex Serratted Flange 25 5025139SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Engine & PTO Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301439

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Engine & PTO Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

ENGINE, 28HP, BRIGGS AND STRATTON 1- 1 BOLT, 5/16-18 X 1-3/4 GD5 YZ 2 5025011X14SM 4 ANCHOR, CLUTCH 3 5046416CSM 1 NUT, 5/16-18 HEX SERRATED FLANGE, LARGE 4 5025139SM 3 CLUTCH ANCHOR PAD 5 5043636SM 1 WASHER, .34 X 1.25 X 10 GA 6 5044617SM 4 NUT, 5/16-18 HEX NYLOCK FLANGE 7 5025392SM 6 WASHER, 5/16 SAE 8 5025155SM 2 BOLT, CRANKSHAFT, 7/16" X 2-1/2 9 5045289SM 1 METRIC ADAPTER, M14-1.5" TO 3/8 NPTF 10 5100366SM 1 CLUTCH,5218-134, WARNER 11 5100084SM 1 WASHER, 5/16" INT. TOOTH LOCK 12 5025188SM 4 SPACER, 1.13 X 1.75 X .50 13 5044062SM 1 PULLEY, CRANKSHAFT (DOUBLE A) 14 5047075SM 1 KEY, 1/4 SQ. X 1.00 15 5050407X8SM 1 SPACER, 1.13 X 1.75 X 1.090, BLACK ZINC 16 5101554SM 1 WASHER, 5/16" LOCK 17 5025170SM 4 BOLT, 5/16-18 X 3", FLT 18 5025425SM 1 BOLT, 1/4-20 X 1", GD5 19 5025010X8SM 1 GROMMET, 7/8 20 5021379SM 1 CLAMP, VINYL 21 5021500SM 1 HOSE, OIL DRAIN 22 5048681SM 1 BOLT, 3/8-16 X 1 GD5 YZ 23 5025013X8SM 2 WASHER, 3/8 SAE 24 5025156SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 25 5025394SM 2 NUT, 1/4-20 HEX NYLOCK FLANGE 26 5025391SM 1 MUFFLER, EXHAUST ASSY 27 843906SM 1 BOLT, 5/16-18 X 1 GD5 YZ 28 5025011X8SM 2 ELEMENT, AIR CLEANER, SECONDARY (Not Shown) 29 841238SM 1 RAIN CAP (Not Shown) 30 809268SM 1 AIR CLEANER ASSEMBLY, COMPLETE (Not Shown) 31 809218SM 1 ELEMENT, AIR CLEANER, PRIMARY (Not Shown) 32 841237SM 1 FILTER, OIL, BRIGGS & STRATTON (Not Shown) 33 492932SSM 1 SCREEN, ARRESTER (Not Shown) 34 842859SM 1 SCREW,SELF-TAP,#8-32 X 3/8,WASH HEX, CZ (Not Shown) 35 5025470SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Instrument Control Panel Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301287

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Instrument Control Panel Group

PART NO. DESCRIPTIONREF NO. QTY.

RING, SWITCH RETAINER 1 5022222SM 1 NUT, 3/8-24 HEX JAM (SV) 2 5025309SM 1 SWITCH, HEADLIGHT 3 1703799SM 1 SCREW, 1/4-20 X 1/2 ALLEN BH 4 5025299X4SM 3 WASHER, #10 SAE 5 5023499SM 4 SPACER, .20 X .38 X 1.25 6 5061763SM 2 SWITCH, IGNITION, 6 POST (Includes Ref Nos 21 - 23) 7 5020927SM 1 CABLE, CHOKE CONTROL, 51 (Z) (Includes Ref Nos 2) (61" Model Only) 8 5047779SM 1 SWITCH, BLADE ENGAGEMENT 9 5022180SM 1 CABLE, THROTTLE, 47" (61" Model Only) 10 5101076SM 1 HOUR METER, W/ SUPRESSOR 11 5100996SM 1 FUSE, ATO, 20 AMP 12 5021603SM 4 O-RING, 7/8 ID X 1/16 W 13 5022269SM 1 PLATE, CONTROL PANEL - BLK 14 5403402ASM 1 LEVER, THROTTLE CONTROL 15 5101537SM 1 COVER, VINYL FUSEBLOCK 16 5022805SM 1 KNOB, THROTTLE CONTROL (SV) 17 5046360X1SM 1 SCREW, #10-24 X 3/4" ROUND PHILLIPS 18 5025179X6SM 2 NUT, #10-24 HEX NYLON LOCK 19 5025271SM 4 SCREW, #10-24 X 2" 20 5025270X16SM 2 KIT, IGNITION, SET (SV) 21 5022789SM 1 COVER (SV) 22 5022790SM 1 PLASTIC NUT (SV) 23 5022791SM 1 FUSE BLOCK (SV) 24 5021518SM 1 CABLE, CHOKE CONTROL, 47 (Includes Ref Nos 2) (52" Model Only) 25 5046501SM 1 CABLE, THROTTLE, 42" (52" Model Only) 26 5101073SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Pump Drive Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301430

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Pump Drive Group

PART NO. DESCRIPTIONREF NO. QTY.

NUT, 3/8-16 HEX SERRATED FLANGE 1 5025128SM 4 KEY, 5MM SQ. W/ RADIUS 2 5023254SM 2 BOLT, 1/4-20 X 1, GD5 3 5025010X8SM 4 BOLT, 3/8-16 X 1-1/4" GD5 4 5025013X10SM 4 NUT, 3/8-16 HEX NYLOCK FLANGE 5 5025394SM 3 BELT,#41-1299, BANDED -EL 64.76 (pair) 6 5100555SM 1 BOLT, 3/8-16 X 2-1/4 GD5 YZ 7 5025013X18SM 1 WELD, ARM, PUMP DRIVE IDLER - ORG 8 5046430CSM 1 BOLT, 3/8-16 X 1-3/4 GD5 9 5025013X14SM 1 NUT, 3/8-16 HEX SIDE LOCK 10 5025100SM 1 NUT, 3/8-16 HEX 11 5025034SM 2 SPRING, EXTENSION, SWIVEL END 12 5022847SM 1 EYE BOLT, 3/8-16 X 4-1/4, 1 EYE 13 5021812SM 1 PULLEY, PUMP DRIVE 14 5022586SM 2 BUSHING, TAPERED HUB 15 5022587SM 2 PULLEY, IDLER, SINGLE FLANGE 16 5022621SM 1 BUSHING, BRASS, 1.25X1X1.25 17 5022157SM 2 SPACER, .39 X 1.00 X 2.55 18 5045135SM 1 SPACER, .45 X 1.88 X .38 19 5045475SM 1 WASHER, .41 X 1.75 X .14 20 5025305SM 1 BOLT, 3/8-16 X 4 GD5 YZ 21 5025013X32SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301431

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

WASHER, 3/8 SAE 1 5025156SM 6 BOLT, 3/8-16 X 1 GD5 YZ 2 5025013X8SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 3 5025394SM 10 BEARING, BRONZE FLANGE, 3/4 4 5021098SM 2 BALL JOINT, 5/16-24, LH FEMALE 5 5022628SM 2 ROD, HYDRO LINKAGE 6 5046420SM 2 MOUNT, REVERSE RETURN - ORG 7 5400653CSM 2 BOLT, 1/4-20 X 3/4 GD5 YZ 8 5025010X6SM 4 WASHER, 1/4 SAE 9 5025154SM 4 NUT, 1/4-20 HEX NYLOCK FLANGE 10 5025391SM 4 SPRING, REVERSE RETURN 11 5022645SM 2 BUSHING, NYLON 12 5023260SM 2 NUT, 5/16-24 HEX, LH 13 5023212SM 2 NUT, 5/16-24 HEX 14 5025033SM 6 COLLAR, 5/16 SET 15 5020047SM 2 WASHER, 5/16 SAE 16 5025155SM 8 BOLT, 5/16-18 X 1-1/4 GD5 YZ 17 5025011X10SM 4 PLATE, HAND GUARD, LH - ORG 18 5403956CSM 1 BOLT, 5/16-18 X 1-1/8 GD5 19 5025011X9SM 2 BALL JOINT, 5/16-24, FEMALE 20 5021146SM 2 SPACER, .39 X .63 X 1.50 21 5048264SM 6 BOLT, 3/8-16 X 2-1/2 GD5 YZ 22 5025013X20SM 4 BOLT, 3/8-16 X 3 GD5 YZ 23 5025013X24SM 2 BOLT, 3/8-16 X 1-1/4 GD5 24 5025013X10SM 2 BEARING, FLANGE 25 5021499SM 2 NUT, 3/8-16 HEX NYLON LOCK 26 5025096SM 4 BOLT, 5/16-18 X 1-3/4 GD5 TFL 27 5025055X14SM 4 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 28 5025139SM 12 BOLT, 3/8-16 X 1-3/4 GD5 29 5025013X14SM 4 WELD, CONTROL SHAFT, RH - ORG 30 5403620CSM 1 WELD, CONTROL SHAFT, LH - ORG 31 5403619CSM 1 WELD, NEUTRAL LOCK, LH - ORG 32 5400820CSM 1 WELD, NEUTRAL LOCK, RH - ORG 33 5400824CSM 1 BOLT, 5/16-18 X 1 GD5 YZ 34 5025011X8SM 4 SWITCH, PLUNGER, N.O. 35 5021451SM 2 SCREW, #10-24 X 1/2 ROUND PHILLIPS 36 5025179X4SM 4 NUT, #10-24 HEX 37 5025029SM 4 PLATE, HAND GUARD, RH - ORG 38 5403597CSM 1 10MM BALL STUD, 5/16-18 X 3/4 THDS 39 5101307SM 4 WASHER, 5/16 LOCK YZ 40 5025170SM 4 WELD, HANDLE MOTION CONTROL RH - ORG 41 5400637CSM 1 MOUNT, CONTROL ARM 42 5047004SM 2 GRIP, FOAM, 3/4 ID, 16 LONG 43 5022068SM 2 WELD, HANDLE MOTION CONTROL LH - ORG 44 5400636CSM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301431

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

WASHER, 3/8 X 1" X 1/16, NYLON F/W 45 5025424SM 2 NUT, 5/16-18 HEX NYLOCK FLANGE 46 5025392SM 8 DAMPENER, CONTROL,#(P6709/P3610) 47 5100940SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - S/N: 201317251 & Above

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301479

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - S/N: 201317251 & Above

PART NO. DESCRIPTIONREF NO. QTY.

ROD, NEUTRAL RETURN 1 5100947SM 2 SPRING, REVERSE RETURN 2 5022645SM 2 BUSHING, NYLON 3 5023260SM 2 BUSHING, FLANGED .375 X .630 X 2.00 4 5100942SM 2 COLLAR, 3/8" SET 5 5010546SM 4 WASHER, 3/8 SAE 6 5025156SM 12 PIN, HAIR, .0915 X 1-7/8 7 5025210SM 2 BALL STUD, 5/16 X .50,# PC-477-2) 8 5100941SM 4 DAMPENER, CONTROL,#(P6709/P3610) 9 5100940SM 2 NUT, 5/16-18 HEX NYLOCK FLANGE 10 5025392SM 8 ROD, HYDRO LINKAGE 11 5100946SM 2 NUT, 5/16-24 HEX, LH 12 5023212SM 2 BALL JOINT, 5/16-24, LH FEMALE 13 5022628SM 2 WELD, SHAFT MOTION CONTROL-RH-IS500-ORG 14 5402589CSM 1 BOLT, 5/16-18 X 1 GD5 YZ 15 5025011X8SM 6 WASHER, 5/16" SAE 16 5025155SM 8 BOLT, 5/16-18 X 1-1/4" GD5 YZ 17 5025011X10SM 2 BALL JOINT, 5/16-24, FEMALE 18 5021146SM 2 NUT, 5/16-24 HEX 19 5025033SM 6 BEARING, BRONZE FLANGE, 3/4 20 5021098SM 2 BOLT, 3/8-16 X 1" GD5 YZ 21 5025013X8SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 22 5025394SM 14 BEARING, FLANGE 23 5021499SM 2 BOLT, 3/8-16 X 1-1/4" GD5 24 5025013X10SM 2 NUT, 3/8-16 HEX NYLON LOCK 25 5025096SM 4 BOLT, 3/8-16 X 1-3/4" GD5 26 5025013X14SM 8 MOUNT, CONTROL ARM 27 5047004SM 2 WELD, NEUTRAL LOCK - RH - IS500-ORG 28 5402595CSM 1 WELD, NEUTRAL LOCK - LH - IS500-ORG 29 5402594CSM 1 SWITCH, PLUNGER, N.O./N.C. 30 5022095SM 2 SCREW, #10-24 X 1/2 ROUND PHILLIPS 31 5025179X4SM 4 NUT, #10-24 HEX 32 5025029SM 4 BOLT, 5/16-18 X 1-1/8" GD5 33 5025011X9SM 2 NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 34 5025127SM 8 BOLT, 3/8-16 X 2-1/2" GD5 YZ 35 5025013X20SM 4 SPACER, .39 X .63 X 1.50 36 5048264SM 6 BOLT, 3/8-16 X 3" GD5 YZ 37 5025013X24SM 2 WELD, HANDLE MOTION CONTROL-LH 38 5047055CSM 1 WELD, HANDLE MOTION CONTROL-RH 39 5047056CSM 1 WASHER, 5/16" LOCK 40 5025170SM 4 GRIP, FOAM, 3/4 ID, 16 LONG 41 5022068SM 2 GUARD, RUBBER MOT CTRS - IS500Z 42 5100948SM 2 PUSH RIVET (TREE TYPE), BLACK 43 5025431SM 4 SPRING, EXTENSION 44 5020639SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - S/N: 201317251 & Above

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301479

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Motion Control Group - S/N: 201317251 & Above

PART NO. DESCRIPTIONREF NO. QTY.

WELD, SHAFT MOTION CONTROL-LH-IS500-ORG 45 5402588CSM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287hyd0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Group

PART NO. DESCRIPTIONREF NO. QTY.

CAP, Hydraulic Oil Only 1 5100017SM 1 HYDRAULIC OIL RESERVOIR, Complete 2 5061712SM 1 FITTING, Elbow, 3/8" 3 5023118SM 1 GROMMET 4 1726400SM 1 GROMMET 5 5023121SM 1 FITTING, Elbow, 5/8" 6 5023119SM 1 CLAMP, #10 Hose 7 5021164SM 2 HOSE, Hydraulic, 24.5" 8 5050933X24P5SM 1 CLAMP, #4 Hose 9 5022922SM 1 HOSE, Hydraulic, 18.5" 10 5050860X18P5SM 1 CLAMP, Hose 11 5023268SM 11 HYDRAULIC HOSE ASSEMBLY, 25" 12 5023370SM 2 HYDRAULIC HOSE ASSEMBLY, 21" 13 5022711SM 2 FITTING, O-Ring Adapter 14 5022633SM 2 FITTING, O-Ring, 90 Deg. 15 5022599SM 2 HYDRAULIC WHEEL MOTOR, Complete (S/N: 2012607199 & BELOW) 16 5023316SM 2 KEY 17 5022042X2SM 2 NUT, CASTLE 18 5022042X3SM 2 HOSE, Hydraulic, 18" 19 5050860X18SM 1 FITTING, O-Ring, 45 Deg. 20 5023338SM 4 FITTING, O-Ring, 90 Deg. 21 5023267SM 2 FITTING, TEE, 3/8" Hose 22 5022920SM 2 FITTING, O-Ring, 90 Deg. 23 5023346SM 1 FITTING, O-Ring, 45 Deg. 24 5023461SM 3 FILTER HEAD 25 5023096SM 1 FILTER 26 1719168SM 1 HOSE, Hydraulic, 6-1/2" 27 5050860X6P5SM 2 HYDRAULIC PUMP, RH (S/N: 2012607199 & BELOW) 28 5023373SM 1 FAN SHROUD (S/N: 2012607199 & BELOW) 28 5023371SM 1 FAN, HYD. PUMP 28 5100333SM 1 HYDRAULIC PUMP, LH (S/N: 2012607199 & BELOW) 29 5023372SM 1 FAN SHROUD (S/N: 2012607199 & BELOW) 29 5023371SM 1 FAN, HYD. PUMP 29 5100333SM 1 HOSE, Hydraulic, 6" 30 5050860X6SM 2 NUT, 3/8-16 Hex Serrated Flange 31 5025128SM 4 BOLT, 3/8-16 X 1-1/4" 32 5025013X10SM 4 BOLT, 1/4"-20 X 3/4" 33 5025010X6SM 2 WASHER, 1/4" LOCK 34 5025169SM 2 WASHER, 1/4" SAE 35 5025154SM 2 PIN, COTTER 36 5025203X16SM 2 WHEEL MOTOR, COMPLETE (S/N: 2012607200 & ABOVE) 37 5100877SM 2 HYDRAULIC PUMP, LH (S/N: 2012607200 & ABOVE) 38 5100670SM 1 FAN SHROUD (S/N: 2012607200 & ABOVE) 38 5100162SM 1 HYDRAULIC PUMP, RH (S/N: 2012607200 & ABOVE) 39 5100671SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287hyd0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Group

PART NO. DESCRIPTIONREF NO. QTY.

FAN SHROUD (S/N: 2012607200 & ABOVE) 39 5100162SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301275

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

ADAPTER, HYD. 1 5022634SM 2 FITTING, #8 JIC - #8 O-RING, 45 DEG. 2 5023338SM 4 ADAPTER, 90 DEG, 9/16-3/8 BARB 3 5023267SM 2 FITTING, TEE, 1/2 HOSE 4 5022920SM 2 ADAPTER, 90 DEG, 9/16-5/8 BARB 5 5023346SM 1 ADAPTER, 45 DEG, 9/16-3/8 BARB 6 5023461SM 3 FITTING, #10 ORING-#8 JIC, 90D 7 5023276SM 2 HOSE, 3/8" PUSH-LOCK, 22.00" 8 5050860X22SM 2 PIN, COTTER, 1/8 X 2 9 5025203X16SM 2 HOSE, 3/8" PUSH-LOCK, 6.00" 10 5050860X6SM 2 HOSE, 3/8" PUSH-LOCK, 8.00" 11 5050860X8SM 2 NUT, 3/8-16 HEX SERRATED FLANGE 12 5025128SM 4 HOSE, 5/8, PUSH-LOCK, 24.00" 13 5050933X24SM 1 HOSE ASSEMBLY, 26.50" 14 5100248SM 2 HOSE, ASSEMBLY, 22.5 15 5100249SM 2 CAP, HYDRAULIC, SHIELDED VENT 16 5100017SM 1 TANK, HYDRAULIC, ASSEMBLY (Includes Ref. Nos 21,22,23, and 24) 17 5061712SM 1 CLAMP, #4 HOSE, STAINLESS 18 5022922SM 1 CLAMP, #10 HOSE, STAINLESS 19 5021164SM 2 CLAMP, HOSE 20 5023268SM 11 FITTING, ELBOW, 3/8" (SV) 21 5023118SM 1 KIT, GROMMET (SV) 22 5600050SM 1 GROMMET (SV) 23 5023121SM 1 FITTING, ELBOW, 5/8" (SV) 24 5023119SM 1 WHEEL MOTOR, 15IN3/REV - LH (Includes Ref. Nos 27 and 28) 25 5100407SM 1 WHEEL MOTOR, 15IN3/REV - RH (Includes Ref. Nos 27 and 28) 26 5100410SM 1 KEY 27 5022042X2SM 2 NUT, CASTLE, 1-20 28 5022042X3SM 2 PUMP, HYDRO-GEAR, 12CC - LH (Incl. Ref. No 37 and 38.) 29 5100670SM 1 PUMP, HYDRO-GEAR, 12CC - RH (Incl. Ref. No 37 and 38.) 30 5100671SM 1 FILTER HEAD, HYDRAULIC 31 5023096SM 1 FILTER, OIL 32 1719168SM 1 BOLT, 1/4-20 X 3/4 GD5 YZ 33 5025010X6SM 2 WASHER, 1/4 SAE 34 5025154SM 6 WASHER, 1/4 LOCK 35 5025169SM 2 BOLT, 3/8-16 X 1-1/4 GD5 36 5025013X10SM 4 FAN SHROUD (Not Shown) 37 5100162SM 2 FAN, HYD. PUMP (Not Shown) 38 5100161X1SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Mount Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287hyt0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Mount Group

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- NUT, 1/4-20 HEX NYLOCK FLANGE 2 5025391SM 4 CLAMP, VINYL, 1" 3 5023173SM 1 BOLT, 3/8-16 X 1-1/4" 4 5025013X10SM 2 WASHER, 3/8" SAE 5 5025156SM 4 NUT, 3/8-16 Hex Nylock Flange 6 5025394SM 6 BOLT, 3/8-16 X 1-1/2" 7 5025013X12SM 4 WASHER, 1/4" SAE 8 5025154SM 4 BOLT, 1/4-20 X 1" 9 5025010X8SM 4 HYDRAULIC TANK MOUNT 10 5061747CSM 1 MOUNT BRACKET 11 5061746CSM 2 HYDRAULIC TANK 12 - 1 WASHER, 3/8" GR. 9 FLAT 13 5025293SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Mount Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301437

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Hydraulic Mount Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

TANK, HYDRAULIC, ASSEMBLY (See Hydraulic Group) 1- 1 BOLT, 3/8-16 X 1-1/2 GD5 YZ 2 5025013X12SM 4 NUT, 1/4-20 HEX NYLOCK FLANGE 3 5025391SM 4 WASHER, 1/4 SAE 4 5025154SM 4 BOLT, 1/4-20 X 1, GD5 5 5025010X8SM 2 WASHER, 3/8 SAE 6 5025156SM 6 BOLT, 3/8-16 X 1-1/4 GD5 7 5025013X10SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 8 5025394SM 6 BOLT, 1/4-20 X 3/4 GD5 YZ 9 5025010X6SM 3 NUT, 5/16-18 HEX NYLOCK FLANGE 10 5025392SM 2 CAP, HYDRAULIC (See Hydraulic Group) 11 - 1 BAR, STABILIZER, SIDE - ORG 12 5401952CSM 2 BAR, STABILIZERS, CENTER - ORG 13 5401955CSM 1 PLATE, HYDRAULIC TANK MOUNT - ORG 14 5401954CSM 1 CLAMP, VINYL INSULATED 15 5021500SM 2 BRACKET, HOSE - ORG 16 5401736CSM 1 MOUNT, OIL FILTER - ORG 17 5403945CSM 1 WASHER, 5/16 SAE 18 5025155SM 2 BOLT, 5/16-18 X 1 GD5 YZ 19 5025011X8SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Electrical Group - 25HP Kawasaki

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301422

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Electrical Group - 25HP Kawasaki

PART NO. DESCRIPTIONREF NO. QTY.

SWITCH, Ignition, Complete 1 5020927SM 1 KEY, Ignition Molded 2 5022789SM 1 COVER 3 5022790SM 1 PLASTIC NUT 4 5022791SM 1 SWITCH, PTO 5 5022180SM 1 HOUR METER 6 5100996SM 1 HEADLIGHT SWITCH 7 1703799SM 1 NUT, #10-24 Hex Nylon Lock 8 5025271SM 2 SPACER, .20 x .38 x 1.25 9 5061763SM 2 WASHER, #10 SAE 10 5023499SM 2 SCREW, #10-24 x 2" 11 5025270X16SM 2 FUSE, 20A 12 5021603SM 4 FUSE BLOCK COVER 13 5022805SM 1 HARNESS ASSEMBLY, Control Panel 14 5400067SM 1 HARNESS ASSEMBLY, Main 15 5400068SM 1 ENGINE HARNESS, Kawi 16 5049973SM 1 SOLENOID 17 1686981SM 1 WASHER, Light Lock, 5/16 18 5023217SM 2 NUT, Hex Jam, 5/16-24 19 2820438SM 2 SWITCH, Seat, Gray, NC (BOLT-IN) 20 1716368SM 1 SWITCH, Seat, Gray, NC (TWIST-IN) 20 1718981SM 1 BOLT, Hex Washer Head PLASTITE, 1/4 X 1/2 21 1960536SM 2 SWITCH, Plunger, NO/NC 22 5022095SM 2 HEADLIGHT HARNESS 23 5061793SM 1 BOLT, 1/4-20 X 1-1/4 24 5025010X10SM 2 WASHER, 1/4" SAE 25 5025154SM 2 HEADLIGHT 26 5023482SM 2 SPACER, .39 X .75 X .38 27 5044933SM 4 NUT, 1/4-20 Hex Nylock Flange 28 5025391SM 2 SWITCH, Plunger, Snap-In, NO/NC 29 5022182SM 2 STRAP, BATTERY, 14 LONG, Rubber 30 1722009SM 1 BATTERY, Lawn & Garden, 12V (BCIU1, 340 CCA) 31 - 1 POSITIVE (+) BATTERY CABLE, 22" 32 5023488SM 1 POSITIVE (+) BATTERY CABLE, 22" 33 5021405SM 1 BOLT, 1/4-20 x 3/4 34 5025010X6SM 4 NUT, 1/4-20 Hex Serrated Flange 35 5025126SM 4 CABLE, Ground 36 5044014SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Electrical Group - 28 HP Briggs & Stratton

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301288

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Electrical Group - 28 HP Briggs & Stratton

PART NO. DESCRIPTIONREF NO. QTY.

SWITCH, Ignition, Complete 1 5020927SM 1 KEY, Ignition Molded 2 5022789SM 1 COVER 3 5022790SM 1 PLASTIC NUT 4 5022791SM 1 SWITCH, PTO 5 5022180SM 1 HOUR METER 6 5100996SM 1 HEADLIGHT SWITCH 7 1703799SM 1 NUT, #10-24 Hex Nylon Lock 8 5025271SM 2 SPACER, .20 x .38 x 1.25 9 5061763SM 2 WASHER, #10 SAE 10 5023499SM 2 SCREW, #10-24 x 2" 11 5025270X16SM 2 FUSE, 20A 12 5021603SM 4 FUSE BLOCK COVER 13 5022805SM 1 WIRE HARNESS, BRIGGS, JUMPER 14 5401204SM 1 WIRE HARNESS, MAIN, IS1500ZX 15 5403908SM 1 ENGINE HARNESS 16 - 1 CABLE, Ground 17 5044014SM 1 NUT, 1/4-20 Hex Serrated Flange 18 5025126SM 4 BOLT, 1/4-20 x 3/4 19 5025010X6SM 4 SWITCH, Seat, Gray, NC (BOLT-IN) 20 1716368SM 1 SWITCH, Seat, Gray, NC (TWIST-IN) 20 1718981SM 1 BOLT, Hex Washer Head PLASTITE, 1/4 X 1/2 21 1960536SM 2 SWITCH, Plunger, NO/NC 22 5022095SM 2 HEADLIGHT HARNESS 23 5061793SM 1 BOLT, 1/4-20 X 1-1/4 24 5025010X10SM 2 WASHER, 1/4" SAE 25 5025154SM 2 HEADLIGHT 26 5023482SM 2 SPACER, .39 X .75 X .38 27 5044933SM 4 NUT, 1/4-20 Hex Nylock Flange 28 5025391SM 2 SWITCH, Plunger, Snap-In, NO/NC 29 5022182SM 2 STRAP, BATTERY, 14 LONG, Rubber 30 1722009SM 1 BATTERY, WET ( BCIU1, 340 CCA) 31 - 1 BATTERY CABLE, POSITIVE, 22 32 5021405SM 1 WIRE HARNESS, FUSE BLOCK - IS2000 33 5401328SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Seat, Mount & Floor Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287stm0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Seat, Mount & Floor Group

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- BOLT, 5/16-18 X 1 2 5025011X8SM 4 WASHER 5/16" Gr. 9 Flat 3 5025292SM 4 NUT, 5/16-18 Hex Nylock Flange 4 5025392SM 10 BOLT, 1/4-20 X 1-1/4 5 5025010X10SM 4 WASHER, 1/4" SAE 6 5025154SM 4 NUT, 1/4-20 Hex Nylock Flange 7 5025391SM 4 BOLT, 3/8-16 X 6 8 5025013X48SM 2 WASHER 3/8" SAE 9 5025156SM 6 NUT, 3/8-16 Hex Nylock Flange 10 5025394SM 4 BOLT, 3/8-16 X 1" GD5 YZ 11 5025013X8SM 4 SAFETY WALK, FLOOR REST 12 5049979SM 1 SAFETY WALK, FLOOR PLATE 13 5049978SM 1 SEAT, BLACK 14 5061599SM 1 RUBBER BUMPER 15 5022612SM 2 SEAT PLATE (Includes Safety Decal.) 16 5401389SM 1 BLOCK, DECK LIFT SUPPORT 17 5100643SM 2 SUPPORT, SEAT PLATE (S/N: 2012619803 & Below) 18 5400849CSM 1 PLATE, FLOOR 19 5049953CSM 1 ARM REST (SET OF 2) 20 1686907SM 1 PLATE, SEAT SUPPORT - ORG (S/N: 2012619804 & Above) 21 5403632CSM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Seat, Mount & Floor Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301429

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Seat, Mount & Floor Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- BOLT, 5/16-18 X 1 GD5 YZ 2 5025011X8SM 8 WASHER, 5/16 SAE 3 5025155SM 8 NUT, 5/16-18 HEX NYLOCK FLANGE 4 5025392SM 14 BOLT, 1/4-20 X 1-1/4, GD5 5 5025010X10SM 4 WASHER, 1/4 SAE 6 5025154SM 4 NUT, 1/4-20 HEX NYLOCK FLANGE 7 5025391SM 4 BOLT, 3/8-16 X 5-1/2 GD5 YZ 8 5025013X44SM 2 WASHER, 3/8 SAE 9 5025156SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 10 5025394SM 2 SAFETY WALK, 8.00 X 15.00 11 5101011SM 1 SAFETY WALK, 11.50 X 15.00 12 5101013SM 1 SEAT, XB-180, NO LOGO, BLACK 13 5061599SM 1 BUMPER, RUBBER 5/16-18 14 5022612SM 2 WELD, SEAT PLATE - IS2000 - ORG 15 5401589CSM 1 BLOCK, DECK LIFT SUPPORT 16 5100643SM 2 WELD, SEAT SUPPORT - ORG 17 5403954CSM 1 PLATE, FLOOR - ORG 18 5403953CSM 1 ARM REST (SET OF 2) 19 1686907SM 1 SPRING, SEAT ADJUSTMENT 20 5100636SM 1 KIT, SEAT RAILS, COMPLETE 21 5061599X1SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Fuel Supply Hose Group & Tank Replacement Parts Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287fsh0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Fuel Supply Hose Group & Tank Replacement Parts Group

PART NO. DESCRIPTIONREF NO. QTY.

CLAMP, HOSE, EXTERNAL, 1/2 - RED 1 5020835SM 2 HOSE, 1/4" FUEL, 16.00" (21 & 23 HP BRIGGS & STRATTON MODELS) 2 5050831X16SM 1 SEE REF # 6 3-- 1 FUEL BUSHING 4 5600050SM 1 SEE REF # 6 5-- 2 HOSE ASSEMBLY 6 5101149SM 1 SEE REF # 6 7-- 1 HOSE, 1/4" FUEL, 10.00" (25 HP KAWASAKI MODELS) 8 5050831X10SM 1 HOSE, 1/4" FUEL, 12.00" (28 HP BRIGGS & STRATTON MODELS) 9 5050831X12SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Fuel Tank & Mount Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287tnk0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Fuel Tank & Mount Group

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- SCREW, Allen Head, #10-24 x 3/8" 2 5025386SM 6 MOUNT, TANK, FRONT 3 5400012CSM 2 BOLT, 3/8-16 X 1" GD5 4 5025013X8SM 2 NUT, 3/8-16 Hex Nylock Flange 5 5025394SM 6 GROMMET 6 5022917X1SM 1 GAUGE, FUEL LEVEL 7 5022917SM 1 BOLT, 3/8-16 X 1-1/4" 8 5025013X10SM 4 WASHER 3/8" GD.9 FLAT 9 5025293SM 6 BOLT, 5/16-18 X 1" 10 5025011X8SM 10 WASHER, 5/16" Lock 11 5025170SM 10 WASHER, 5/16" GD.9 FLAT 12 5025292SM 10 FUEL TANK CAP 13 5022158SM 1 PLATE, BADGE 14 5400250CSM 2 TANK MOUNT - LH 15 5049942CSM 1 TANK MOUNT - RH 16 5049941CSM 1 TANK, FUEL - LH 17 5049947SM 1 TANK - RH 18 5049948SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Fuel Tank & Mount Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301435

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Fuel Tank & Mount Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

TANK, FUEL, 1500Z - LH 1 5049947SM 1 TANK, FENDER, 1500Z - RH 2 5049948SM 1 FUEL CAP, 3.5", VENTED 3 5101272SM 1 BADGE, IS1500Z, ORG 4 5400250CSM 2 SCREW, #10-24 X 3/8 ALLEN BHBZ 5 5025386SM 6 BOLT, 5/16-18 X 1 GD5 YZ 6 5025011X8SM 10 WASHER, 5/16 LOCK YZ 7 5025170SM 10 WASHER, 5/16 SAE 8 5025155SM 10 GAUGE, FUEL LEVEL 9 5022917SM 1 GROMMET 10 5022917X1SM 1 WASHER, 3/8 SAE 11 5025156SM 4 NUT, 3/8-16 HEX NYLOCK FLANGE 12 5025394SM 4 BOLT, 3/8-16 X 1 GD5 YZ 13 5025013X8SM 4 WELD, TANK MOUNT - RH - ORG 14 5403942CSM 1 WELD, TANK MOUNT - LH - ORG 15 5403943CSM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Parking Brake Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287pbr0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Parking Brake Group

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- MOTOR MOUNT 2- BOLT, 5/16-18 X 3/4 12PT FLANGE - PATCH 3 5023490SM 8 WASHER, 1 x 2 4 5023249SM 2 BOLT, 3/8-16 X 3/4" 5 5025013X6SM 4 NUT, 3/8-16 Hex Nylock Flange 6 5025394SM 6 BOLT, 5/16-18 X 1-3/4" 7 5025011X14SM 2 NUT, 5/16-18 Hex Nylock Flange 8 5025392SM 2 BRAKE LOCK LINK 9 5061794CSM 2 BOLT, 3/8-16 X 1-1/2" 10 5025013X12SM 2 NUT, 3/8-16 Hex Serrated Flange 11 5025128SM 2 WHEEL & BRAKE HUB 12 5023368SM 2 BRAKE ASSEMBLY, LH 13 5023500SM 1 BRAKE ASSEMBLY, RH 14 5023501SM 1 SPACER, .32 X .75 X 1.06 15 5042134SM 2 BEARING, Flange 16 5021098SM 2 GRIP, BLACK FLEXIBLE 17 5100171SM 1 SPACER, .38 X .50 X .27 18 5041930SM 2 WASHER, 3/8" SAE 19 5025156SM 2 SPRING, Compression 20 5023320SM 2 SPRING, Compression 21 5022361SM 2 WASHER, 5/16" SAE 22 5025155SM 2 NUT, 5/16-24 Hex Nylon Lock 23 5025045SM 2 PARKING BRAKE CABLE (S/N: 2012619803 & Below) 24 5100087SM 2 CLEVIS, 5/16-24, Plastic 25 5020979SM 2 NUT, 5/16-24 Hex 26 5025033SM 2 CLEVIS PIN, 5/16" X 1" 27 5025213X8SM 2 PIN, HAIR, .0585" X 1-1/8" 28 5025211SM 2 GROMMET, 1-1/4" 29 5021397SM 2 BRAKE SHAFT (S/N: 2012619803 & Below) 30 5049831CSM 1 WHEEL MOTOR 31 - BOLT, 5/16"-18 X 1 1/8" 32 5025011X9SM 1 NUT, 5/16"-18 SERR. LG. FLANGE 33 5025139SM 2 WELD, BRAKE SHAFT - ORANGE (S/N: 2012619804 & Above) 34 5403631CSM 1 GRIP, FOAM 3/4 ID X 6 X .187 (S/N: 2012619804 & Above) 35 5101038SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Parking Brake Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301432

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Parking Brake Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

WELD, BRAKE SHAFT - ORG 1 5403948CSM 1 GROMMET, 1-1/4 2 5021397SM 2 BOLT, 5/16-18 X 3/4 12PT FLANGE - PATCH 3 5023490SM 8 WASHER, 5/16 LOCK YZ 4 5025170SM 8 BOLT, 3/8-16 X 3/4 GD5 YZ 5 5025013X6SM 4 NUT, 3/8-16 HEX NYLOCK FLANGE 6 5025394SMSM 4 BOLT, 5/16-18 X 1-3/4 GD5 YZ 7 5025011X14SM 2 NUT, 5/16-18 HEX NYLOCK FLANGE 8 5025392SM 2 LINK, BRAKE LOCK - ORG 9 5047084CSM 2 BOLT, 3/8-16 X 1-1/2 GD5 YZ 10 5025013X12SM 2 NUT, 3/8-16 HEX SERRATED FLANGE 11 5025128SM 2 DRUM,1-1/4TAPER,5 BOLT 12 5023368SM 2 ASSM, BRAKE, 1-1/4 HUB, LH 13 5023500SM 1 ASSM, BRAKE, 1-1/4 HUB, RH 14 5023501SM 1 SPACER, .32 X .75 X 1.06 15 5042134SM 2 BEARING, BRONZE FLANGE, 3/4 16 5021098SM 2 GRIP, FOAM, 3/4 ID X 6 X .187 17 5101038SM 1 SPACER, .38 X .50 X .27 18 5041930SM 2 WASHER, 3/8 SAE 19 5025156SM 2 SPRING, COMPRESSION 20 5023320SM 2 SPRING-COMP, .75 X .162 X 2.5 21 5048719SM 2 WASHER, 5/16 SAE 22 5025155SM 2 NUT, 5/16-24 HEX NYLON LOCK 23 5025045SM 2 CABLE, PARKING BRAKE IS2000 24 5100115SM 2 CLEVIS, 5/16-24, PLASTIC 25 5020979SM 2 NUT, 5/16-24 HEX 26 5025033SM 2 PIN, CLEVIS, 5/16 X 1 YZ 27 5025213X8SM 2 PIN, HAIR, .0585 X 1-1/8, 1/4 EYE, YZ 28 5025211SM 2 NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) 29 5025139SM 2 BOLT, 5/16-18 X 1-1/4 GD5 YZ 30 5025011X10SM 1 SWITCH, PLUNGER, NO/NC SNAP-IN 31 5022182SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Suspension Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287susr0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Suspension Group

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- BOLT, 1/2-13 X 6-1/2" 2 5025017X52SM 2 WASHER, 1/2" SAE 3 5025158SM 10 SHOCK ASSEMBLY 4 5023436SM 2 BOLT, 3/8-16 X 1-1/4" 5 5025013X10SM 12 WASHER, 3/8" GR. 9 FLAT 6 5025293SM 12 BOLT, 3/8-16 X 2-1/4" 7 5025013X18SM 2 NUT, 1/4" -20 NYLOCK FLANGE 8 5025391SM 1 WASHER, 3/8" FENDER 9 5025165SM 8 NUT, 3/8-16 Hex Nylock Flange 10 5025394SM 16 SPACER, .52 X 1.00 X 3.42 11 5061339SM 2 1/2 - 13 NYLOCK FLANGE NUT 12 5025396SM 8 WHEEL MOTOR 13 - BOLT, 1/2-13 X 2-1/4" w/ Loctite Patch 14 5023481SM 4 NUT, 1/2-13 Square 15 5025330SM 4 BOLT, 1/2-13 X 3-1/2" 16 5025017X28SM 8 SPACER, .53 X 1.00 X 1.00 17 5061670SM 8 BOLT, 3/8-16 X 3 1/2" 18 5025013X28SM 2 GREASE FITTING 19 5020020SM 2 TIE BAR - 48" MODELS ONLY 20 5404064CSM 1 TIE BAR - 52" MODELS ONLY 20 5404065CSM 1 PLATE, FRAME SUPPORT 21 5061751CSM 1 FRAME SUPPORT, RH 22 5061753CSM 1 BUSHING, Flange 23 5021541SM 4 MOTOR MOUNT, RH 24 5401357CSM 1 MOTOR MOUNT, RH 24 5401166CSM 1 MOTOR MOUNT, LH 25 5401356CSM 1 MOTOR MOUNT, LH 25 5401165CSM 1 SPACER, .34 X 1.54 X .25 26 5400065SM 2 SCREW, 5/16-18 X 1 27 5025303SM 2 NUT, 5/16-18 Hex Nylock Flange 28 5025392SM 2 TANK MOUNT 29 - SPANNER WRENCH 30 5022853SM 1 BOLT 1/4-20 X 3/4" 31 5025010X6SM 1 WASHER, 1/4" SAE 32 5025154SM 1 CLAMP, DOUBLE TUBE 33 5025430SM 1 SPACER,.390 X 1.00 X 1.00 - YZ 34 5100896SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Suspension Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301433

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Rear Suspension Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

BUSHING, FLANGE 1 5021541SM 4 WELD, TIE BAR - ORG 2 5404051CSM 1 SPACER, .52 X 1.00 X 3.42 3 5061339SM 2 WASHER, 1/2 GD9 YZ 4 5025440SM 2 BOLT, 1/2-13 X 6-1/2 GD8 YZ 5 5025017X52SM 2 NUT, 1/2-13 HEX NYLON LOCK 6 5025056SM 2 GREASE FITTING, 1/4-28 STRAIGHT 7 5020095SM 2 SPACER, .53 X 1.00 X 1.00 8 5061670SM 8 BOLT, 1/2-13 X 3-1/2 GD5 9 5025017X28SM 8 PLATE, FRAME SUPPORT - ORG 10 5061751CSM 2 SPACER, .39 X 1.00 X .50 11 5046860SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 12 5025394SM 16 WASHER, 3/8 FENDER 13 5025165SM 6 WASHER, 3/8 GD.9 FLAT 14 5025293SM 12 BOLT, 3/8-16 X 3 GD5 YZ 15 5025013X24SM 1 BOLT, 3/8-16 X 2-1/4 GD5 YZ 16 5025013X18SM 2 BOLT, 3/8-16 X 1 GD5 YZ 17 5025013X8SM 4 SPACER, .390 X 1.00 X 1.00 - YZ 18 5100896SM 2 SHOCK ABSORBER, # 7417-106 19 5023436SM 2 WELD, MOTOR MOUNT - LH - ORG 20 5401166CSM 1 WELD, MOTOR MOUNT - RH - ORG 21 5401165CSM 1 FUEL TANK MOUNT (SEE FUEL TANK & MOUNT GROUP) 22 - NUT, 1/2-13 HEX NYLOCK FLANGE 23 5025396SM 8 BOLT, 3/8-16 X 1-1/4 GD5 24 5025013X10SM 12 BOLT, 3/8-16 X 3-1/2 GD5 YZ 25 5025013X28SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301434

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

NUT, 3/8-16 HEX NYLOCK FLANGE 1 5025394SM 4 PIN, CLEVIS, 1/4 X 1/2 2 5025212X4SM 1 BUSHING, 1.00 X 1.13 X 1.38, PLASTIC 3 5023343SM 8 EYE BOLT, 3/8-16 X 4-1/4, 1 EYE 4 5021812SM 2 GREASE FITTING, 1/4-28 STRAIGHT 5 5020095SM 2 WELD, ROD DECK LIFT - ORG 6 5400719CSM 1 GRIP, FOAM 7 5021880SM 1 SPRING, EXTENSION 8 5020639SM 1 WASHER, 1/4 SAE 9 5025154SM 2 NUT, 1/4-20 HEX SERR. FLANGE 10 5025126SM 2 BOLT, 1/4-20 X 3/4 GD5 YZ 11 5025010X6SM 2 PIN, HITCH, 1/2 X 2.00 OAL, YP 12 5023498SM 1 BOLT, 3/8-16 X 2, CARRIAGE 13 5025146X16SM 1 WELD, DECK ADJUST LINK - ORG 14 5400769CSM 1 NUT, 3/8 JAM 15 5025034SM 4 WASHER, 1/2 SAE 16 5025158SM 2 BALL JOINT, 1/2-20, MALE 17 5022434SM 9 NUT, 1/2-20 HEX JAM 18 5025089SM 11 BOLT, 1/2-13 X 2-1/4 GD5 YZ 19 5025017X18SM 2 WELD, DECK STABILIZER - ORG 20 5400647CSM 2 WELD, REAR LIFT - LH - ORG 21 5401664CSM 1 NUT, 5/8-11 HEX 22 5025040SM 8 PIVOT, SPRING ROD 23 5045447SM 4 ROD, DECK LIFT BENT 24 5100149SM 2 WELD, REAR LIFT - RH - ORG 25 5401665CSM 1 ROD, 5/8-11 X 9.00 26 5100247SM 2 COLLAR, 5/8 SPLIT 27 5020441SM 4 SPRING, DECK LIFT ASSIST 28 5023355SM 2 NUT, 3/8-16 HEX SIDE LOCK 29 5025100SM 1 WELD, DECK LIFT LEVER, LH - ORG 30 5401671CSM 1 PEDAL, FOOT - ORG 31 5061569CSM 1 RUBBER, FOOT PEDAL 32 1715834SM 1 PIVOT BLOCK, PLASTIC 33 5100634SM 4 PLATE, PIVOT BLOCK SUPPORT - ORG 34 5403925CSM 2 WASHER, 1/2 GD9 YZ 35 5025440SM 12 BOLT, 1/2-13 X 3-1/2 GD5 36 5025017X28SM 4 WASHER, 3/8 SAE 37 5025156SM 8 BOLT, 3/8-16 X 2-3/4 GD5 YZ 38 5025013X22SM 4 ADAPTER, CASTER AXLE 39 5047103SM 1 WELD, DECK LIFT LEVER, RH - ORG 40 5401672CSM 1 NUT, 1/2-20 HEX NYLON LOCK 41 5025098SM 9 BOLT, 3/8-16 X 3/4, GD5, YZ WITH PATCH 42 5025443SM 4 WASHER, .390 X 1.50 X .109, YZ 43 5100548SM 4 SHAFT, DECK STABILIZER 44 5049868SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - 28 HP Briggs & Stratton Models

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301434

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - 28 HP Briggs & Stratton Models

PART NO. DESCRIPTIONREF NO. QTY.

COLLAR, 3/4 SPLIT 45 5010114SM 2 BOLT, 3/8-16 X 1 GD5 YZ 46 5025013X8SM 4 BOLT, 1/2-20 X 1-3/4 GD5 YZ 47 5025018X14SM 8 WELD, DECK LIFT SHAFT - ORG 48 5403949CSM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202961 & Below

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287dlt0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202961 & Below

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- MOTOR MOUNT 2- HITCH PIN, 1/2 X 2" 3 5023498SM 1 BOLT, 3/8-16 X 1-1/4" 4 5025013X10SM 6 WASHER, 3/8 GR. 9 FLAT 5 5025293SM 10 NUT, 3/8-16 Hex Nylock Flange 6 5025394SM 8 BOLT, 3/8-16 X 1" 7 5025013X8SM 4 BOLT, 1/2-13 X 3" 8 5025017X24SM 1 WASHER, 1/2" SAE 9 5025158SM 4 BOLT, 1/4-20 x 5/8" 10 5025010X5SM 2 NUT, 1/4-20 Hex Serrated Flange 11 5025126SM 2 BOLT, 1/2-20 X 1-3/4" 12 5025018X14SM 4 CLEVIS PIN, 1/2" X 1-1/2" 13 5025328X12SM 2 HAIR PIN CLIP 14 1918196SM 2 NUT, 5/8-11 HEX 15 5025040SM 8 FOOT PEDAL 16 1715834SM 1 COLLAR, 5/8" Split 17 5020441SM 6 BOLT, 3/8-16X3/4 WITH PATCH (S/N: 2000484318 - 2013202961) 18 5025443SM 4 EYE BOLT, 3/8-16 X 6" 19 5023497SM 1 NUT, 3/8-16 Hex 20 1916950SM 2 GREASE FITTING 21 5020095SM 4 BUSHING, Flange 22 5023343SM 8 ADAPTER, CASTER AXLE 23 5047103SM 1 CLEVIS , 1/2-20, STEEL 24 5023174SM 2 SPRING ROD PIVOT 25 5045447SM 2 DECK ADJUSTMENT ROD 26 5049971SM 2 FOOT PEDAL MOUNT 27 5061569CSM 1 DECK LIFT SHAFT 28 5049839CSM 1 DECK LIFT LOCK ROD 29 5061527CSM 1 BALL JOINT, 1/2-20 Male 30 5022434SM 5 DECK STABILIZER 31 5049867CSM 2 DECK STABILIZER SHAFT 32 5049868SM 2 NUT, 1/2-13 Hex Nylon Lock 33 5025056SM 2 NUT, 1/2-20 Hex Jam 34 5025089SM 7 COLLAR, 3/4" Split 35 5010114SM 4 GRIP 36 5021880SM 1 NUT, 1/2-13 Hex Jam 37 5025301SM 1 BOLT, 1/2-13 X 2-1/4" 38 5025017X18SM 1 CARRIAGE BOLT, 3/8-16 X 2" 39 5025146X16SM 1 CLEVIS PIN, 1/4" x 3/4" 40 5025412SM 1 NUT, 3/8-16 Hex Nylon Lock 41 5025096SM 2 SPRING, Extension 42 5020639SM 1 DECK LIFT SPRING 43 5023355SM 1 NUT, 3/8"-16 SIDE LOCK 44 5025100SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202961 & Below

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287dlt0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202961 & Below

PART NO. DESCRIPTIONREF NO. QTY.

DECK LIFT ROD 45 5049848SM 2 DECK LIFT PIVOT, LH (S/N: 2000484318 - 2013202961) 46 5402814CSM 1 DECK LIFT PIVOT, RH (S/N: 2000484318 - 2013202961) 46 5402815CSM 1 REAR DECK LIFT, LH (S/N: 2000484318 - 2013202961) (Includes Ref Nos 21 & 22) 47 5600216CSM 1 REAR DECK LIFT, RH (S/N: 2000484318 - 2013202961) (Includes Ref Nos 21 & 22) 47 5401666CSM 1 DECK ADJUST LINK 48 5061523CSM 1 SPRING ROD PIVOT 49 5045447SM 2 SPRING ROD PIVOT 49 5045856SM 2 BUSHING, .510 X .625 X .500 50 5061780SM 2 NUT, 3/8"-16 SERRATED FLANGE 51 5025128SM 4 WASHER, 1/2" GR. 9 FLAT 52 5025440SM 4 NUT, 1/2"-20 NYLON LOCK 53 5025098SM 4 FLAT WASHER, THICK (S/N: 2000484318 - 2013202961) 54 5100548SM 4 GREASE FITTING 45 55 5020020SM 2 WASHER, 3/8" SAE 56 5025156SM 4 COLLAR, 1" SPLIT (S/N: 2000484317 & Below) (Includes Ref Nos 21 & 22) 57 5020602SM 4

58 5049836CSM 1

WELD, REAR LIFT, LH - ORG (S/N: 2000484317 & Below) (Includes Ref Nos 21 &

22) WELD, REAR LIFT, RH - ORG (S/N: 2000484317 & Below) 59 5049837CSM 1 WELD, PIVOT, DECK LIFT - LH - ORG (S/N: 2000484317 & Below) 60 5045449CSM 1 WELD, PIVOT, DECK LIFT - RH - ORG (S/N: 2000484317 & Below) 61 5045450CSM 1 CAP, BLACK VINYL 62 5101028SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202962 & Above

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287dlt1

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202962 & Above

PART NO. DESCRIPTIONREF NO. QTY.

MAIN FRAME 1- MOTOR MOUNT 2- HITCH PIN, 1/2 X 2" 3 5023498SM 1 BOLT, 3/8-16 X 1-1/4" 4 5025013X10SM 6 WASHER, 3/8 GR. 9 FLAT 5 5025293SM 10 NUT, 3/8-16 Hex Nylock Flange 6 5025394SM 8 BOLT, 3/8-16 X 1" 7 5025013X8SM 4 BOLT, 1/2-13 X 3" 8 5025017X24SM 1 WASHER, 1/2" SAE 9 5025158SM 4 BOLT, 1/4-20 x 5/8" 10 5025010X5SM 2 NUT, 1/4-20 Hex Serrated Flange 11 5025126SM 2 BOLT, 1/2-20 X 1-3/4" 12 5025018X14SM 4 CLEVIS PIN, 1/2" X 1-1/2" 13 5025328X12SM 2 HAIR PIN CLIP 14 1918196SM 2 NUT, 5/8-11 HEX 15 5025040SM 8 FOOT PEDAL 16 1715834SM 1 COLLAR, 5/8" Split 17 5020441SM 6 BOLT, 3/8-16X3/4 WITH PATCH 18 5025443SM 4 EYE BOLT, 3/8-16 X 6" 19 5023497SM 1 NUT, 3/8-16 Hex 20 1916950SM 2 GREASE FITTING 21 5020095SM 4 BUSHING, Flange 22 5023343SM 8 ADAPTER, CASTER AXLE 23 5047103SM 1 CLEVIS , 1/2-20, STEEL 24 5023174SM 2 SPRING ROD PIVOT 25 5045447SM 2 DECK ADJUSTMENT ROD 26 5049971SM 2 FOOT PEDAL MOUNT 27 5061569CSM 1 DECK LIFT SHAFT 28 5404305CSM 1 DECK LIFT LOCK ROD 29 5061527CSM 1 BALL JOINT, 1/2-20 Male 30 5022434SM 5 DECK STABILIZER 31 5049867CSM 2 DECK STABILIZER SHAFT 32 5049868SM 2 NUT, 1/2-13 Hex Nylon Lock 33 5025056SM 2 NUT, 1/2-20 Hex Jam 34 5025089SM 7 COLLAR, 3/4" Split 35 5010114SM 4 GRIP 36 5021880SM 1 NUT, 1/2-13 Hex Jam 37 5025301SM 1 BOLT, 1/2-13 X 2-1/4" 38 5025017X18SM 1 CARRIAGE BOLT, 3/8-16 X 2" 39 5025146X16SM 1 CLEVIS PIN, 1/4" x 3/4" 40 5025412SM 1 NUT, 3/8-16 Hex Nylon Lock 41 5025096SM 2 SPRING, Extension 42 5020639SM 1 DECK LIFT SPRING 43 5023355SM 1 NUT, 3/8"-16 SIDE LOCK 44 5025100SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202962 & Above

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287dlt1

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Deck Lift Group - S/N: 2013202962 & Above

PART NO. DESCRIPTIONREF NO. QTY.

DECK LIFT ROD 45 5049848SM 2 DECK LIFT PIVOT, RH 46 5402815CSM 1 DECK LIFT PIVOT, LH 46 5402814CSM 1 REAR DECK LIFT, LH 47 5600216CSM 1 REAR DECK LIFT, RH 47 5401666CSM 1 DECK ADJUST LINK 48 5061523CSM 1 SPRING ROD PIVOT 49 5045447SM 2 SPRING ROD PIVOT 49 5045856SM 2 BUSHING, .510 X .625 X .500 50 5061780SM 2 NUT, 3/8"-16 SERRATED FLANGE 51 5025128SM 4 WASHER, 1/2" GR. 9 FLAT 52 5025440SM 4 NUT, 1/2"-20 NYLON LOCK 53 5025098SM 4 FLAT WASHER, THICK 54 5100548SM 4 GREASE FITTING 45 55 5020020SM 2 WASHER, 3/8" SAE 56 5025156SM 4 PIVOT BLOCK, PLASTIC 57 5100634SM 4 PLATE, PIVOT BLOCK SUPPORT - ORG 58 5403925CSM 2 BOLT, 3/8-16 X 2-3/4 GD5 YZ 59 5025013X22SM 4 CAP, BLACK VINYL 60 5101028 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Wheel & Tire Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301279

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Wheel & Tire Group

PART NO. DESCRIPTIONREF NO. QTY.

TIRE, CASTER, 13 X 5.00-6 1 5022631SSM 2 TIRE, CASTER, 13 X 5.00-6 (Includes Ref No. 2 - 7 & 15) 1 5022631SSM 2 * FLAT-FREE TIRE ASSEMBLY, 13 x 5.0 - 6 1 5023280SM 2 TIRE, 13 x 5.0 - 6 2 5022029X1SM 2 TIRE, 13 x 5.0 - 6 (Includes Ref No. 4 & 5, see foot note.) 2 5022029X1SM 2 WHEEL ASSEMBLY, for 13 x 5.0 - 6 Tire, Complete (Includes Ref No. 4 & 5) 3 5022631SX1SM 2 BEARING, Tapered Roller (2 per tire) 4 5022631SX2SM 4 GREASE SEAL (2 per tire) 5 5022631SX3SM 4 ADAPTER, CASTER AXLE (2 per tire) 6 5047103SM 4 BOLT, 1/2-13 X 8 GD5 YZ (NLA) 7 5025017X64SM 2 NUT, 1/2-13 HEX NYLOCK FLANGE 8 5025396SM 2 TIRE ASSM, 22 X 11.00-10 (Includes Ref. Nos 10 and 11.) 9 5023369SM 2 TIRE, 22 X 11.0 - 10 10 5023369X2SM 2 WHEEL ASSEMBLY, 10 X 7 11 5023369X1SM 2 NUT, 1/2-20, FOR WHEEL BOLT SILVER 12 5020601SM 10 WASHER, 1/2 SAE 13 5025158SM 2 BEARING, RACE, (SV) (Not Shown) 14 5022631SX4SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Decals - Brand & Model

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

287dclb

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Decals - Brand & Model

PART NO. DESCRIPTIONREF NO. QTY.

DECAL, Simplicity Logo (Qty: 1 on models w/ carb guard only) 1 1722551SM 1 DECAL, Citation 2 5061821SM 1 DECAL, Badge, RH 3 5061817SM 1 DECAL, Badge, LH 4 5061816SM 1 DECAL, 48" (48" Models Only) 5 5022811SM 1 DECAL, 52" (52" Models Only) 6 5022812SM 1 DECAL, 61" (61" Models Only) 7 5022813SM 1 LABEL, BRIGGS & STRATTON LOGO (Briggs & Stratton models only) 8 276636 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Decals - Safety & Operation

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301487

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Decals - Safety & Operation

PART NO. DESCRIPTIONREF NO. QTY.

DECAL, MAIN 1 5100710SM 1 DECAL, DANGER, MOWER DISCHARGE 2 5100137SM 1 DECAL, DANGER, MOWER 3 5100136SM 1 DECAL, CZT HYDRO RELE 4 1725941SM 1 DECAL, BELT & BLADE, IS1500ZX (located under seat mount) (61" Models Only) 5 5100425SM 1 DECAL, Belt & Blade (located under seat mount) (52" Models Only) 6 5100668SM 1 DECAL-HEIGHT CITATION 7 5061724SM 1 DECAL, PINCH POINT 8 5061245SM 1 DECAL, OIL RESEVOIR 9 5048454SM 1 DECAL, FUSE LOCATION 10 5046503SM 1 DECAL, ID PLATE (NOT SHOWN) 11 - 1 DECAL, IGNITION SWITCH 12 5048970SM 1 DECAL, THROTTLE CONTROL 13 5100280SM 1 DECAL, WARNING, ROLL BAR (NOT SHOWN) 14 5100683SM 2 LABEL, EMISSION CONTROL CALIF. 2008 (NOT SHOWN) 15 277802SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Spindle Service Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

SPINDLE

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Spindle Service Group

PART NO. DESCRIPTIONREF NO. QTY.

ASSM, SPINDLE, LOW PROFILE (SV) (Includes Ref No. 2 - 10) 1 5061095SM 3 GREASE FITTING (SV) 2 5023329SM 3 NUT, 3/4-16 HEX (SV) 3 5025405SM 3 WASHER, 3/4" BELLEVILLE (SV) 4 5025406SM 3 TRASH SHIELD (SV) 5 5049793SM 6 BEARING (SV) 6 5023330SM 6 RELIEF VALVE (SV) 7 5023296SM 3 SPINDLE HOUSING (SV) 8 5061097SM 3 SPACER, 1.00 x 1.25 x 1.75 (SV) 9 5061099SM 3 SPINDLE SHAFT (SV) 10 5061098SM 3

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation 5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Hanger Chains

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2875ch0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Hanger Chains

PART NO. DESCRIPTIONREF NO. QTY.

MOWER DECK 1- NUT, 1/2-13 HEX 2 5025038SM 2 NUT, 1/2-13 HEX NYLOCK FLANGE 3 5025396SM 2 WASHER, 1/2" SAE 4 5025158SM 2 NUT, 3/8-16 HEX SERRATED FLANGE 5 5025128SM 4 BOLT, 3/8-16 X 1-3/4" GD5 6 5025013X14SM 6 WASHER, 3/8" SAE 7 5025156SM 12 CHAIN, 5/16" GD30, 3 LINKS 8 5050878X3SM 2 HANGER, FRONT DECK - 2 LINK 9 5047503SM 2 NUT, 3/8-16 HEX JAM 10 5025084SM 4 NUT, 3/8-16 HEX NYLOCK FLANGE 11 5025394SM 4 DECK LIFT PIVOT 12 - -

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Housing, Cover, Spindle & Blade

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2875hc0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Housing, Cover, Spindle & Blade

PART NO. DESCRIPTIONREF NO. QTY.

WASHER, 5/16" SAE 1 5025155SM 8 BODY CLIP, 5/16-18 2 5022308SM 6 BOLT, 5/16-18 X 3/4" 3 5025011X6SM 6 NUT 5/16-24 Hex Nylon Lock 4 5025045SM 2 ROD, Linkage 5 5042555SM 1 NUT, 5/16-18 Hex Nylock Flange 6 5025392SM 12 BOLT, Flange Head, 5/16-18 x 1-1/4 7 5023156SM 12 WASHER, 5/8" USS 8 5025159SM 3 BOLT, 5/8-11 X 1-3/4" 9 5025320X14SM 3 GUARD, 48" DECK - RH 10 5049881CSM 1 GUARD, 52" DECK - RH 10 5061810CSM 1 GUARD, 48" DECK - LH 11 5049882CSM 1 GUARD, 52" DECK - LH 11 5061811CSM 1 SPINDLE ASSEMBLY, Complete 12 5061095SM 3 MOWER BLADE, 16-1/4" 13 5020843ASM 3 MOWER BLADE, 18" 13 5021227ASM 3 RUBBER CHUTE 14 5100524SM 1 CHUTE FRAME 15 5402361CSM 1 CHUTE SUPPORT 16 5402362CSM 1 BOLT, 3/8-16 X 1-1/4" 17 5025013X10SM 1 NUT, 3/8-16 Hex Nylock Flange 18 5025394SM 1 DISCHARGE CHUTE ASSEMBLY 19 5600089SM 1 DECK SHELL W/DECALS, 48" 20 5300030SM 1 DECK SHELL W/DECALS, 52" (S/N: 2012619803 & Below) 20 5300031SM 1 TORSION SPRING SPACER 21 5050086X8SM 1 TORSION SPRING 22 5023385SM 1 WASHER, 5/16" Fender 23 5025164SM 1 CAP 24 5023489SM 1 BOLT, 5/16-18 CARRIAGE, 3/4" 25 5025145X6SM 1 BOLT, 5/16-18 CARRIAGE, 1" 26 5025145X8SM 1 NUT, 5/16-18 NYLOCK FLANGE 27 5025392SM 2 WELD, DISCHARGE BAFFLE, ORG - 52" (S/N: 2012619803 & Below) 28 5401254CSM 1 WELD, DISCHARGE BAFFLE, ORG - 52" (S/N: 2012619804 & Above) 29 5403548CSM 1 DECK SHELL W/ DECALS - 52" (5403609C) (S/N: 2012619804 & Above) 30 5600140 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Pulleys, Belts & Idler Arm

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2875pb0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Pulleys, Belts & Idler Arm

PART NO. DESCRIPTIONREF NO. QTY.

MOWER DECK 1- NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 2 1931277SM 2 KEY, 1/4 SQ. X 1-1/4 3 5050407X5SM 3 GREASE FITTING 4 5020095SM 1 WASHER, 1/2" USS 5 5025150SM 2 WASHER, 1/2" SAE 6 5025158SM 2 NUT, 1/2-13 HEX NYLON LOCK 7 5025056SM 2 BOLT, 1/2-13 X 3" GD5 8 5025017X24SM 2 NUT, 1/2"-13 SIDE LOCK 9 5025332SM 3 BOLT, 1/2-13 X 5" GD5 YZ 10 1926159SM 1 SPRING, EXTENSION, SWIVEL END 11 5023340SM 1 BOLT, 5/16-18 X 1-1/4" GD5 YZ 12 5025011X10SM 1 IDLER ARM 13 5045106CSM 1 KIT, PULLEY & SHIELD (Includes Part Nos 5021976 & 5101103) 14 5600184SM 2 SPACER, .52 X 1.00 X 3.50 15 5045022SM 1 BUSHING, FLANGE 16 5021541SM 2 SPACER, .50 X 1.00 X 2.00 17 5043607SM 1 SPACER, .51 X .75 X .56 18 5047027SM 1 ANCHOR, SPRING 19 5402555CSM 1 SPACER, .52 X 1.25 X .70 20 5047142SM 2 SPACER, .52 X 1.00 X .44 21 5045023SM 1 SPACER, .52 X 1.00 X .88 22 5044673SM 1 BELT, 48" DECK 23 5023297SM 1 BELT, 52" DECK 23 5023435SM 1 PULLEY, 5.72., 48" DECK 24 5023175SM 3 PULLEY, 6.122 OD., 52" DECK 24 5023178SM 3 WASHER, 3/4" BELLEVILLE 25 5025406SM 3 NUT, 3/4-16 HEX 26 5025405SM 3 WASHER, FRAME RETAINING 27 5044913SM 1 PULLEY, IDLER, 6.75 OD X 1.62 FACE 28 5100529SM 1 BOLT, 1/2-13 X 3-1/2" GD5 29 5025017X28SM 1 BOLT, 1/2-13 X 2-3/4" GD5 30 5025017X22 1

31 5101103SM 3

SHIELD, PULLEY BEARING (PULLEY BEARING SHIELDS ARE INSTALLED ON TOP OF 5021976 PULLEYS)

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Rollers

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2875rl0

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

48" & 52" Mower Deck - Rollers

PART NO. DESCRIPTIONREF NO. QTY.

WASHER 3/8" SAE 1 5025156SM 2 NUT, 3/8-16 Hex Nylock Flange 2 5025394SM 4 SPACER, .38 X .50 X 5.06 3 5046586SM 2 WASHER, 1/2" SAE 4 5025158SM 4 BOLT, 3/8-16 X 6" 5 5025013X48SM 2 BOLT, REAR WHEEL 6 2108765SM 2 WASHER 7 1960027SM 4 GAUGE WHEEL 8 1714760SM 6 STRIPER MOUNT, LH 9 5403622CSM 1 STRIPER MOUNT, RH 10 5403623CSM 1 SHAFT, Roller 11 5046903SM 1 ROLLER 12 5020785SM 2 COLLAR, 5/8" Split 13 5020441SM 3 COLLAR, 3/4" Double Split 14 5020594SM 2 BEARING, Flange 15 5022846SM 2 GUIDE SHAFT, LH 16 5046900CSM 1 GUIDE SHAFT, RH 17 5046901CSM 1 BUSHING, Flange 18 5023155SM 4 BOLT, 1/4-20 X 1-1/4" 19 5025010X10SM 8 BOLT, 1/4-20 X 3/4" 20 5025010X6SM 8 WASHER, 1/4" SAE 21 5025154SM 4 WASHER, 1/4" SAE 22 5025154SM 8 NUT, 1/4-20 Hex Nylock Flange 23 5025391SM 8 WASHER, 5/16" GD 9 24 5025292SM 4 NUT, 5/16-18 Hex Large Serrated Flange 25 5025139SM 4 NUT 1/4-20 Hex Nylon Lock 26 5025095SM 4 SPRING, Compression 27 5022845SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900762 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Hanger Chains

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301280

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Hanger Chains

PART NO. DESCRIPTIONREF NO. QTY.

CHAIN, 5/16 GD30, 3 LINKS 1 5050878X3SM 2 HANGER, FRONT DECK - 2 LINK 2 5047503SM 2 BOLT, 3/8-16 X 1-3/4 GD5 3 5025013X14SM 6 WASHER, 3/8 SAE 4 5025156SM 10 NUT, 3/8-16 HEX SIDE LOCK 5 5025100SM 4 NUT, 3/8-16 HEX SERRATED FLANGE 6 5025128SM 8 WASHER, 1/2 SAE 7 5025158SM 2 NUT, 1/2-13 HEX 8 5025038SM 2 NUT, 1/2-13 HEX NYLOCK FLANGE 9 5025396SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Housing, Covers, Spindles & Blades Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301436

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Housing, Covers, Spindles & Blades Group

PART NO. DESCRIPTIONREF NO. QTY.

DECK SHELL W/DECALS, 61" SIDE DISCHARGE (Includes Safety Decals) 1 5600183SM 1 61" RUBBER CHUTE ASSEMBLY, Complete (Includes Ref Nos 3 - 5) 2 5061288CSM 1 CHUTE, DISCHARGE, RUBBER, 61/72" 3 5402403SM 1 WELD, FRAME, CHUTE, 61 - ORG 4 5061293CSM 1 SUPPORT, DISCHARGE CHUTE, 61/72 - ORG 5 5402360CSM 1 NUT, 3/8-16 HEX NYLOCK FLANGE 6 5025394SM 3 BOLT, 3/8-16 X 1-1/2 GD5 YZ 7 5025013X12SM 3 NUT, 5/16-24 HEX NYLON LOCK 8 5025045SM 2 ROD MOUNT, CHUTE 61" 9 5061300SM 1 GUARD, 61", RH - ORG 10 5400791CSM 1 GUARD 61" - LH 11 5061451CSM 1 NUT, 5/16-18 HEX NYLOCK FLANGE 12 5025392SM 15 BOLT, 5/16-18 X 3/4 FLANGE 13 5025411SM 1 WASHER, 5/8 USS 14 5025159SM 3 CLIP, BODY , 5/16-18 FOR 7 GA. 15 5022308SM 6 WASHER, 5/16 GD.9 FLAT 16 5025292SM 6 BOLT, 5/16-18 X 3/4 GD5 17 5025011X6SM 2 ASSM, SPINDLE, LOW PROFILE 18 5061095SM 3 BOLT, 5/16-18 X 1 1/4 FLANGE 19 5023156SM 12 BLADE, 21 (SET OF THREE) 20 5020842SSM 1 BOLT, 5/8-11 X 1-3/4" GD8 21 5025320X14SM 3 WASHER, 5/16 SAE 22 5025155SM 4 PLATE, DEFLECTOR - ORG 23 5401344CSM 1 SAFETY WALK, 9.75 X 6.00 24 5101005SM 1 BOLT, 5/16-18 X 1 GD5 YZ 25 5025011X8SM 6 SPRING, TORSION 26 5023385SM 1 CAP, PROTECTOR, .120 ID 27 5023489SM 1 TUBE, 1/2 X 3/8 BLACK POLY, 10.75 LG 28 5050086X10P75SM1 WASHER, 5/16 FENDER 29 5025164SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Pulleys, Belts & Idler Arm

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301438

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Pulleys, Belts & Idler Arm

PART NO. DESCRIPTIONREF NO. QTY.

BELT, #7-4918 1 5022061SM 1 BOLT, 1/2-13 X 4-1/2 GD5 2 5025017X36SM 1 WASHER, 1/2 USS 3 5025150SM 2 SPACER, .52 X 1.00 X 3.50 4 5045022SM 1 BUSHING, FLANGE 5 5021541SM 2 ASSM, IDLER ARM 6 5045106CSM 1 NUT, 1/2-13 HEX NYLOCK FLANGE 7 5025396SM 5 NUT, 3/4-16 HEX 8 5025405SM 3 KIT, PULLEY & SHIELD (Includes Part Nos 5021976 & 5101103) 9 5600184SM 4 WASHER, 1/2 GD9 YZ 10 5025440SM 1 BOLT, 1/2-13 X 2-3/4 GD5 11 5025017X22SM 1 GREASE FITTING, 1/4-28 STRAIGHT 12 5020095SM 1 MOUNT, IDLER SPRING - ORG 13 5400846CSM 1 NUT, 3/8-16 HEX SIDE LOCK 14 5025100SM 1 SPACER, .52 X 1.00 X .38 15 5044609SM 2 SPRING, EXTENSION, SWIVEL END 16 5023340SM 1 NUT, 3/8-16 HEX SERRATED FLANGE 17 5025128SM 1 BOLT, 3/8-16 X 1-1/4 GD5 18 5025013X10SM 1 BOLT, 1/2-13 X 3-1/2 GD5 19 5025017X28SM 1 WELD, MOUNT, IDLER 20 5046434CSM 3 PULLEY, 6.5 EOD X 25MM, SPLIT 21 5100700SM 3 KEY, 1/4 SQ. X 1-1/4 22 5050407X5SM 3 WASHER, 3/4 BELLEVILLE 23 5025406SM 3 SPACER, .52 X 1.00 X .44 24 5045023SM 1 BOLT, 1/2-13 X 3 GD5 25 5025017X24SM 2 SHIELD, PULLEY BEARING 26 5101103SM 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Rollers & Casters

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301285

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Rollers & Casters

PART NO. DESCRIPTIONREF NO. QTY.

WHEEL- 2.00 WIDE 3.92 DIA 0.531ID POLY 1 1714760SM 6 WASHER, 1/2 GD9 YZ 2 5025440SM 6 SPACER, .38 X .50 X 5.06 3 5046586SM 2 NUT, 3/8-16 HEX NYLOCK FLANGE 4 5025394SM 4 BOLT, 3/8-16 X 3-1/2 GD5 YZ 5 5025013X28SM 2 WASHER, 3/8 SAE 6 5025156SM 4 SPACER, .38 X .50 X 1.25 7 5041931SM 4 SPACER, .51 X .75 X .56 8 5047027SM 2 BOLT, 3/8-16 X 6 GD5 YZ 9 5025013X48SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Striping Roller Bar

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

5301444

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

61" Mower Deck - Striping Roller Bar

PART NO. DESCRIPTIONREF NO. QTY.

WELD, ROLLER MT, COBALT - RH 1 5401299CSM 1 WELD, ROLLER MT, COBALT - LH 2 5401298CSM 1 WELD, ROLLER SLIDE 3 5401301CSM 2 BEARING-FLANGE, 5/8 4 5022846SM 2 SPRING-COMPRESSION 5 5022401SM 2 COLLAR, 3/4 DOUBLE SPLIT 6 5020594SM 2 BUSHING, FLANGE 7 5023155SM 4 ROLLER, DECK 8 5020785SM 2 ROLLER, PLASTIC, .64 X 3.00 X 2.25 9 5100382SM 2 SHAFT, 5/8 X 28.88 10 5401302SM 1 COLLAR, 5/8 SPLIT 11 5020441SM 2 BOLT, 5/16-18 X 1 GD5 YZ 12 5025011X8SM 4 NUT, 5/16-18 HEX NYLON LOCK 13 5025057SM 4 BOLT, 1/4-20 X 3/4 GD5 YZ 14 5025010X6SM 8 NUT, 1/4-20 HEX NYLOCK FLANGE 15 5025391SM 8 WASHER, 3/8 SAE 16 5025156SM 4 BOLT, 3/8-16 X 1 GD5 YZ 17 5025013X8SM 4 NUT, 3/8-16 HEX NYLOCK FLANGE 18 5025394SM 4 WASHER, 5/8 SAE 19 5025281SM 6

Footnotes

The above parts group applies to the following Mfg. Nos.:

5900764 - Citation

Briggs and Stratton Yard Power Products Group

TP 400-7405-D-CI-S

Notes

Hardware Identification & Torque Specifications

Common Hardware Types

Hex Head Capscrew

Carriage Bolt

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

second number is present it represent the

When bolt or capscrew is identified as 1/2 - 16 x 2”, this means the second number represents the example, and the final number is the bolt or screw (in this example 2 inches long).

, meaning the

Nominal size

inside diameter

, or

body diameter

threads per inch

body length

Washer

Lockwasher

Hex Nut

is 1/2 inch; if a

threads per inch

is 1/2 inch; the

(16 in this

of the

The guides and ruler furnished below are designed to help you select the appropriate hardware and tools.

1/4 3/4

1/2

Nut, 1/2”

Inside Diameter

1/4 3/4

1/2

Screw, 1/2 x 2

1/4 3/4

1/2

1/4 3/4

1/2

Body

Diameter

Body

Length

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

torques.

b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

Marks

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

2.1

2.3

3.1

3.5

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

30 31 43 49

NOTES

3.4

3.5

4.9

5.5

in/lbs

41 43 60 68

420 571.2

4.6

4.9

6.8

7.7

Wrench & Fastener Size Guide

1/4

1/4” Bolt or Nut

Wrench—7/16”

5/16

5/16” Bolt or Nut

Wrench—1/2”

3/8

3/8” Bolt or Nut

Wrench—9/16”

7/16 DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

1/2

DIA.

1/2” Bolt or Nut

Wrench—3/4”

MANUFACTURING, INC.

500 N. Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA

www.simplicitymfg.com

Briggs and Stratton Yard Power Products Group

Simplicity 5900764, 5900762 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual