REAR TINE TILLERS
AND
ATTACHMENT
413RT
Mfg. No. Description
1692876 413RT, 3.5HP Rear Tine Tiller
516RT
Mfg. No. Description
1692877 516RT, 5HP Rear Tine Tiller
ATTACHMENT
Mfg. No. Description
1692878 Hiller/Furrower (Ref. Info. Only)
Parts Manual
Rev. 1/97
TP 400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc.
All Rights Reserved. Printed In USA.
MANUFACTURING, INC.
500 N Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
1
TP-400-2033-00-RT-S
Table of Contents
This Manual Covers The Following Products:
413RT TILLER PAGES
1692876 413RT, 3.5HP Rear Tine Tiller 2, 4, 6, 8, 10, 12,
14, 16
516RT TILLER
1692877 516RT, 5HP Rear Tine Tiller 2, 4, 6, 8, 10, 12,
14, 16
ATTACHMENTS
1692878 Hiller/Furrower -
Ref. Info. Only
16
REAR TINE TILLERS PAGES
Handles & Controls . . . . . . . . . . . . . . . . . . . . . . . .2
Hood, Drag Stake & Bolo Tines . . . . . . . . . . . . . . .4
Engine Mounting, Belts & Wheels . . . . . . . . . . . . .6
Shifting Mechanism . . . . . . . . . . . . . . . . . . . . . . . .8
Transmission Housing . . . . . . . . . . . . . . . . . . . . .10
Transmission Assembly . . . . . . . . . . . . . . . . . . . .12
Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
ATTACHMENT
Hiller/Furrower Attachment -
Ref. Info. Only
. . . .16
Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . .18
Torque Specification Chart . . . . . . . .Inside Back Cover
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
The above parts group applies to the following Mfg. Nos.:
2
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Handles & Controls
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
A-RT42013A
Prior to Serial No. 50624
Model 516RT Only
(1692877)
REVERSE CONTROL
27
26
24
11
2
33
4
5
66
7
8
99
1010
11
11
12
13
14
15
16
17
18
19
20
21
222322
23
24
25
26
27
2828
2929
30
31
32
3333
34
35
36
37
38
39
40
16
10
1111
12
13
14
15
17
16
41
4141
41
3
TP-400-2033-00-RT-S
Handles & Controls
1 1716699 2 HANDLE GRIP, Drive Control Lever
2 1716721 1 LEVER, Drive Control
3 1716700 2 HANDLE GRIP, Black
4 1716718 1 ASSEMBLY, Main Handlebar
5 1716722 1 BRACKET, Drive Control Lever, Right
6 1716732 4 NUT, Nyloc, 5mm x 0.8mm
7 1716723 1 BRACKET, Drive Control Lever, Left
8 1716720 1 SPRING, Forward Cable Adjust
9 1716709 2 CLAMP, Handlebar Tilt
10 1917372 5 NUT, 5/16”-18 (Qty. 4 on Model 413RT)
11 920438 4 NUT, Jam, 5/16”-24 (Qty. 2 on Model 413RT)
12 1716726 2 CABLE ASSEMBLY, Control Engage (Qty. 1 on Model 413RT)
13 1921958 2 BOLT, Hex Hd, 1/4”-20 x 1/2” (Qty. 1 on Model 413RT)
14 1716727 2 CLAMP, Cable (Qty. 1 on Model 413RT)
15 1716728 2 YOKE, Cable (Qty. 1 on Model 413RT)
16 1716703 3 COTTER PIN (Qty. 1 on Model 413RT)
17 1716702 2 PIN, Link (Qty. 1 on Model 413RT)
18 1716707 1 LEVER, Handlebar Tilt
19 1716714 1 STOP, Handlebar Tilt Lever
20 1716715 1 BOLT, 8mm x 16mm
21 1716708 1 KNOB, Handlebar Tilt Lever
22 1716716 2 BOLT, 10mm x 30mm
23 1923141 * 2 BOLT, Hex Hd, 5/16” - 18 x 2-3/4”, Grade 5
24 1716724 1 COVER, Transmission Wheel Housing
25 1716710 1 SPRING, Handlebar Swivel
26 1716719 1 MOUNT, Handlebar Stem, Left
27 1716706 1 MOUNT, Handlebar Stem, Right
28 1935048 * 2 NUT, Bi-way Lock, 5/16”-18
29 1716717 2 NUT, Nyloc, 10mm
30 1716712 1 LEVER, Handlebar Swivel
31 1716711 1 KNOB, Handlebar Swivel Lever
32 1716713 1 HANDLEBAR STEM
33 1716705 2 TILT FRICTION PAD
34 1931339 4 BOLT, Carriage Hd, 5/16”-18 x 2”
35 1716731 4 BOLT, Hex Hd, 5mm x 0.8mm x 10mm
36 1716730 1 NUT, Nyloc, #10 — Model 516RT Only
37 1921978 1 BOLT, Hex Hd, 5/16”-18 x 2”, Grade 5 — Model 516RT Only
38 1716704 1 BUSHING, Pivot, 5/16” — Model 516RT Only
39 1716725 1 REVERSE HANDLE — Model 516RT Only
40 1716729 1 REVERSE LINK — Model 516RT Only
41 1716701 * 4 BOLT, Hex Flange Hd, 5/16”-18 x 1/2”, Grade 5
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
* Serial Nos. 50624 and above use Ref. Nos. 23 & 28. Units prior to Serial No. 50624 use Ref. No. 41.
The above parts group applies to the following Mfg. Nos.:
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
1
2
3
4
5
6
77
8
9
10
9
11
12
13
11
14
11
13
15
11
10
158
12
17
16
4
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Hood, Drag Stake & Bolo Tones
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
A-RT42014A
The above parts group applies to the following Mfg. Nos.:
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
5
TP-400-2033-00-RT-S
Hood, Drag Stake & Bolo Tones
1 1716700 2 HANDLE GRIP, Black
2 1716745 1 LEVER, Drag Stake — Model 516RT Only
2 1716746 1 LEVER, Drag Stake — Model 413RT Only
3 1716743 1 KNOB, T-Handle, Drag Stake
4 1716742 1 DETENT PIN, 5/16”-18 x 1”
5 1921958 2 BOLT, Hex Hd, 1/4”-20 x 1/2”
6 1716744 1 HOOD, Tiller
7 918468 2 WING NUT, 5/16”-18
8 1921210 16 BOLT, Hex Hd, 3/8”-16 x 1”, Grade 5
9 1716738 8 TINE, Bolo, Left Side — Model 413RT Only
9 1716739 8 TINE, Bolo, Left Side — Model 516RT Only
10 1716740 2 HOLDER, Bolo Tine (Left & Right Sides) — Model 413RT Only
10 1716741 2 HOLDER, Bolo Tine (Left & Right Sides) — Model 516RT Only
11 1916950 18 NUT, Hex, 3/8”-16
12 1921971 2 BOLT, Hex Hd, 3/8”-16 x 1-3/4”
13 1916965 16 LOCKWASHER, Spring, 3/8”
14 1921333 2 BOLT, Hex Hd, 5/16”-18 x 1”, Grade 5
15 1716736 8 TINE, Bolo, Right Side — Model 413RT Only
15 1716737 8 TINE, Bolo, Right Side — Model 516RT Only
16 1716701 2 BOLT, Hex Flange Hd, 5/16”-18 x 1/2”, Grade 5
17 1716735 1 BRACKET, Depth Regulator
* 1716748 1 REPLACEMENT KIT, Bolo Tine Holder — Model 413RT Only
(Includes Ref. Nos. 8, 9, 10, 11, 12, 13 & 15)
* 1716749 1 REPLACEMENT KIT, Bolo Tine Holder — Model 516RT Only
(Includes Ref. Nos. 8, 9, 10, 11, 12, 13 & 15)
* 1716750 1 REPLACEMENT KIT, Bolo Tine — Model 413RT Only
(Includes Ref. Nos. 8, 9, 11, 13 & 15. Does not include bolo tine holders.)
* 1716751 1 REPLACEMENT KIT, Bolo Tine — Model 516RT Only
(Includes Ref. Nos. 8, 9, 11, 13 & 15. Does not include bolo tine holders.)
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
* Not shown as a kit in illustration.
The above parts group applies to the following Mfg. Nos.:
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
The above parts group applies to the following Mfg. Nos.:
6
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Engine Mounting, Belts & Wheels
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
A-RT42015A
30
1
2
3
4
5
6
8
7
9
10
11
12
13
14
15
16
17
18
19
20
21
18
1
22
23
24
25
26
1
18
27
28
23
2929
18
31
33
34
35 36 18 37 38
39
4343
32
23
Model 413RT Only
Model 516RT Only
25
26
1
18
18
1
2
1
40
41
42
2
18
19
Model 516RT Only
(1692877)
REVERSE MECHANISM
7
TP-400-2033-00-RT-S
Engine Mounting, Belts & Wheels
1 1917372 2 NUT, 5/16”-18
2 1960044 3 WASHER, Flat, 5/16”
3 1716784 1 BELT COVER
4 1716773 1 WHEEL, Tire Assembly, Left — Model 516RT Only
4 1716775 1 WHEEL, Tire Assembly, Right — Model 516RT Only
5 1716782 2 SCREW, Soc Hd, 1/4”-20 x 2” — Model 516RT Only
6 1716781 2 SPRING — Model 516RT Only
7 1960151 2 WASHER, 1/4” ID — Model 516RT Only
8 1716779 2 SNAP RING — Model 516RT Only
9 1716777 2 KNOB, Wheel Lockout — Model 516RT Only
10 928372 2 NUT, Keps, 1/4”-20 — Model 516RT Only
11 1716778 1 LOCKOUT, Set of 2 — Model 516RT Only
12 1716772 1 WHEEL, Tire Assembly, Left — Model 413RT Only
12 1716774 1 WHEEL, Tire Assembly, Right — Model 413RT Only
13 1716776 2 LOCKPIN — Model 413RT Only
14 960164 1 WASHER, Flat, 11/16” ID
15 1716771 1 KEY, 3/16” x 1”
16 1716768 1 PULLEY, Transmission — Model 413RT Only
16 1716769 1 PULLEY, Transmission — Model 516RT Only
17 1716770 1 WASHER
18 1917356 9 LOCKWASHER, Spring, 5/16” (Qty. 6 on Model 413RT)
19 1921515 2 BOLT, Hex Hd, 5/16”-24 x 3/4”, Grade 5
20 1960470 4 SCREW, Soc Hd, 5/16”-18 x 1-1/4”
21 1716753 1 BRACKET, Engine Mount, Left Side
22 1716754 1 GUARD, Lower Pulley
23 1716780 5 BOLT, Hex Flange Hd, 5/16”, 18 x 3/4”
24 1716783 1 BUMPER GUARD
25 1916965 2 LOCKWASHER, Spring, 3/8”
26 1921210 2 BOLT, Hex Hd, 3/8”-16 x 1”, Grade 5
27 1716752 1 BRACKET, Engine Mount, Right Side
28 1716767 1 BELT GUIDE, Forward
29 1922127 4 SCREW, Hex Hd, 5/16”-18x 1-3/4”
30 1716756 1 SCREW, Hex Hd, 5/16”-24 x 1/2” — Model 516RT Only
31 1716755 1 BELT GUIDE, Reverse — Model 516RT Only
32 * 1 ENGINE, 3.5HP, Model 413RT
32 * 1 ENGINE, 5HP, Model 516RT
33 1716758 1 SET SCREW, 1/4”-20 x 1/4” — Model 516RT Only
34 905121 1 KEY, Woodruff, #5 — Model 516RT Only
35 1716757 1 PULLEY, Engine Reverse — Model 516RT Only
36 1716761 1 PULLEY, Belt Guide, V-Groove — Model 516RT Only
37 1716760 1 BOLT, Hex Hd, 5/16”-24 x 1-1/2” — Model 516RT Only
38 1716759 1 BELT, Reverse — Model 516RT Only
39 1716765 1 BELT, Forward — Model 413RT Only
39 1716766 1 BELT, Forward — Model 516RT Only
40 1716762 1 SPACER, Engine Pulley
41 1716763 1 KEY, 3/16” x 1-1/2”
42 1716764 1 PULLEY, Engine Forward
43 1921978 2 BOLT, Hex, 5/16”-18 x 2”, Grade 5
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
* See your local Briggs & Stratton distributor for service parts.
The above parts group applies to the following Mfg. Nos.:
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
The above parts group applies to the following Mfg. Nos.:
8
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Shifting Mechanism
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
A-RT42016A
Model 516RT Only
(1692877)
11
12
13
10
14
15
11
12
6
5
111
2
REVERSE MECHANISM
2
1
1
3
44
56789
10
See Handles & Controls
Page 2
9
TP-400-2033-00-RT-S
Shifting Mechanism
1 1917372 4 NUT, 5/16”-18
2 1960044 2 WASHER, Flat, 5/16”
3 1716807 1 BRACKET, Cable Mount
4 1716801 2 MOUNTING BAR, Shifting Mechanism
5 1716702 2 LINK PIN (Qty. 1 on Model 413RT)
6 1716703 2 COTTER PIN (Qty. 1 on Model 413RT)
7 1716804 1 IDLER ARM, Forward
8 1924940 4 WASHER, Flat, 3/8”
9 1716803 1 PULLEY, Forward Idler
10 1916950 2 NUT, Hex, 3/8”-16 (Qty. 1 on Model 413RT)
11 1921978 2 BOLT, Hex Hd, 5/16”-18 x 2, Grade 5
12 1716704 2 BUSHING, Pivot, 5/16” (Qty. 1 on Model 413RT)
13 1716802 1 SPRING, Idler Arm
14 1716805 1 PULLEY, Reverse Idler — Model 516RT Only
15 1716806 1 IDLER ARM, Reverse — Model 516RT Only
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
2
3
4
5
6
3
5
10 789
5
4
5
10
11
12
2
See Handles & Controls
Page 2
See Hood, Drag Stake & Bolo Tines
Page 4
1
For Internal Components,
See Transmission Assembly
Page 12
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
The above parts group applies to the following Mfg. Nos.:
10
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Transmission Housing
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
A-RT42017A
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
11
TP-400-2033-00-RT-S
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
* Not shown as a kit in illustration.
The above parts group applies to the following Mfg. Nos.:
Transmission Housing
1 1716787 1 TRANSMISSION ASSEMBLY — Model 413RT Only
(Complete with all gears, shafts, seals, etc.)
1 1716788 1 TRANSMISSION ASSEMBLY — Model 516RT Only
(Complete with all gears, shafts, seals, etc.)
2 1716780 8 BOLT, Hex Flange Hd, 5/16”-18 x 3/4”, Grade 5
(Tiller Housing & Transmission Cover)
3 1716789 2 GASKET, Tiller Housing & Transmission Cover
4 1716790 2 PIPE PLUG, Soc Hd, 1/4”-18, Oil Level
5 1716791 4 SEAL, Tiller Housing
6 1716794 1 PLUG, Oil Fill
7 1716798 3 BOLT, Hex Flange Hd, 1/4”-20 x 3/4”
8 1716797 1 OIL SEAL, Drive Shaft
9 1716796 1 CAP, Front Bearing
10 1716792 2 GASKET, Front Rear Bearing Cap
11 1716793 1 CAP, Rear Bearing
12 1716795 3 BOLT, Hex Flange Hd, 1/4”-20 x 7/8”
* 1716799 1 KIT, Oil Seal Gasket, (Includes Ref. Nos. 3, 5, 8 & 10).
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
The above parts group applies to the following Mfg. Nos.:
12
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
T ransmission Assembly
A-RT42018A
1
2
4
5
6
7
8
10
8
7
6
5
4
11
12
13
4
5
6
7
8
10
14
15
4
5
6
7
8
14
16
33
9
33
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
13
TP-400-2033-00-RT-S
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
T ransmission Assembly
1 1716793 1 CAP, Rear Bearing
2 1716825 1 SHIM SET, Rear Bearing Cap (includes the following)
2 1716826 SHIM, 1.750 OD x .062” thick, (as req’d.)
2 1716827 SHIM, 1.750 OD x .030” thick, (as req’d.)
2 1716828 SHIM, 1.750 OD x .015” thick, (as req’d.)
2 1716829 SHIM, 1.750 OD x .010” thick, (as req’d.)
3 1716810 2 BEARING, Tapered, (Includes Cone & Race)
4 1716824 4 SPACER, 1.250” x 1.000” x .062” thick
5 1716816 4 BUSHING
6 1716815 4 SHIM SET, Axle Spacer Kit (includes the following)
6 1716817 SHIM, 1.375 OD x .062” thick, (as req’d.)
6 1716818 SHIM, 1.375 OD x .030” thick, (as req’d.)
6 1716819 SHIM, 1.375 OD x .015” thick, (as req’d.)
6 1716820 SHIM, 1.375 OD x .010” thick, (as req’d.)
7 1716830 4 SNAP RING, Retainer, Internal
8 1716791 4 SEAL, Tiller Housing
9 1716809 1 MAIN DRIVE SHAFT
10 1716821 2 SNAP RING, Retainer, External
11 1716797 1 OIL SEAL, Drive Shaft
12 1716814 1 GEAR, Worm, Wheel Shaft
13 1716811 1 WHEEL SHAFT ASSEMBLY, Lockpin — Model 413RT Only
13 1716812 1 WHEEL SHAFT ASSEMBLY, Lockout — Model 516RT Only
14 1716813 2 KEY, 1/4”x 1”
15 1716823 1 GEAR, Worm, Tiller Shaft
16 1716822 1 TILLER SHAFT ASSEMBLY
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
The above parts group applies to the following Mfg. Nos.:
14
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Decals
A-RT42019A
FORWARD - PULL DOWN ON
DRIVE CONTROL LEVERS
TO ENGAGE WHEELS AND TINES
FORWARD - PULL DOWN ON
DRIVE CONTROL LEVERS
TO ENGAGE WHEELS AND TINES
PULL FOR REVERSE
AVOID SERIOUS INJURY
• Read operator's manual(s) before operating.
• Know the location and function of all controls.
• Keep all shields and guards in place and
working while running.
• Never allow children to operate tiller.
• Dress appropriately — wear sturdy footwear.
• Carefully inspect area to be tilled — remove
large rocks and other foreign objects.
• Do NOT till above underground electric, water,
gas, or other utility lines and pipes.
• STOP THE ENGINE AND DISCONNECT THE
SPARK PLUG WIRE before removing debris
or servicing unit.
• When leaving the operating position
for any reason:
— shut off the engine
— wait for all moving parts to stop
WARNING
WHEELS ACT AS BRAKES
• Never start or operate tiller with wheels in the
Free-Wheel position. Make sure wheel lockouts
are engaged through wheel hubs and axle.
• Wheels act as brakes to keep the tiller at a
controlled speed. Disengage wheel lockouts
ONLY when engine is stopped.
REFER TO OPERATORS MANUAL
FOR DETAILED OPERATING INSTRUCTIONS
TO START:
1. Release drive control levers to neutral position.
2. Lower the drag stake so that tines do not touch
the ground.
3. Check position of wheels and wheel lockouts.
4. Slide choke control to choke position.
5. Move throttle control lever to fast position.
6. Pull starter rope.
WARNING
OPERATION
DANGER
AVOID INJURY FROM
ROTATING TINES!
Keep hands, feet,
and clothing away.
• Tines rotate when tiller is
engaged in forward or reverse.
• Tines and wheels rotate when
drive control levers are pulled
down.
• In reverse, tines and wheels
rotate when the reverse handle
is pulled back toward the
operator.
• Releasing the drive control
levers to neutral stops the
wheels and tines.
DO NOT START ENGINE UNLESS BELT
COVER IS ATTACHED. KEEP HANDS, FEET,
AND CLOTHING AWAY FROM MOVING
BELTS AND PULLEYS. FAILURE TO COMPLY
COULD RESULT IN INJURY. SEE OWNER'S
MANUAL FOR FULL SAFETY INSTRUCTIONS.
WARNING
PLACE FREE
HAND HERE
1
22
3
4 55 6 7
1
2
3
4
5
6
7
15
TP-400-2033-00-RT-S
Decals
1 1668202 1 DECAL, Simplicity
2 1716733 1 DECAL, Console (Forward Instructions Model 413RT)
2 1716734 1 DECAL, Console (Forward/Reverse Instructions Model 516RT)
3 1716747 1 DECAL, Hood (Operating Instructions)
4 1716840 1 DECAL, Tine Hood (Tines Danger)
5 1716785 2 DECAL, Model 413RT
5 1716786 2 DECAL, Model 516RT
6 1716839 1 DECAL, Engine (Free-Hand Warning)
7 1716800 1 DECAL, Belt Cover (Warning)
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
The above parts group applies to the following Mfg. Nos.:
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
16
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Hiller/Furrower Attachment (Ref. Info. Only)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
A-TA42020A
The above parts group applies to the following Mfg. Nos.:
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
1692878 Hiller/Furrower Attachment
1
2
3
4
5
6
7
8
9
10
11
12
17
TP-400-2033-00-RT-S
REF NO. PART NO. QTY. DESCRIPTION
Footnotes:
* No servicable parts - components shown for ref. only.
The above parts group applies to the following Mfg. Nos.:
1692878 Hiller/Furrower Attachment (Ref. Info Only)
1 1692878 1 HILLER/FURROWER, Complete (Order as Wholegood)
2 * 1 BOLT, Soc Hd, 3/8”-16 x 1-1/4”
3 * 1 BRACKET
4 * 1 NUT, Hex, 3/8” - 16
5 * 2 NUT, Nyloc, 3/8” - 16
6 * 1 BLADE, Furrower
7 * 2 BOLT, Carriage, 3/8 - 16 x 1-1/2”
8 * 4 BOLT, Carriage, 5/16” - 18 x 3/4”
9 * 1 HILLER WING, Left
9 * 1 HILLER WING, Right (Not Shown)
10 * 4 WASHER, Flat, 5/16”
11 * 4 LOCKWASHER, External Tooth, 5/16”
12 * 4 WING NUT, 5/16 “- 18
1692876 413RT, 3.5HP Rear Tine Tiller
1692877 516RT, 5HP Rear Tine Tiller
1692878 Hiller/Furrower Attachment
18
TP-400-2033-00-RT-S
© Copyright 1997 Simplicity Manufacturing, Inc. All Rights Reserved.
Part Number Index
*632
*632
*162
*163
*164
*165
*166
*167
*168
*169
*169
*1610
*1611
*1612
905121 6 34
918468 4 7
920438 2 11
928372 6 10
960164 6 14
1668202 14 1
1692878 16 1
1716699 2 1
1716700 2 3
1716700 4 1
1716701 * 2 41
1716701 4 16
1716702 2 17
1716702 8 5
1716703 2 16
1716703 8 6
1716704 2 38
1716704 8 12
1716705 2 33
1716706 2 27
1716707 2 18
1716708 2 21
1716709 2 9
1716710 2 25
1716711 2 31
1716712 2 30
1716713 2 32
1716714 2 19
1716715 2 20
1716716 2 22
1716717 2 29
1716718 2 4
1716719 2 26
1716720 2 8
1716721 2 2
1716722 2 5
1716723 2 7
1716724 2 24
1716725 2 39
1716726 2 12
1716727 2 14
1716728 2 15
1716729 2 40
1716730 2 36
1716731 2 35
1716732 2 6
1716733 14 2
1716734 14 2
1716735 4 17
1716736 4 15
1716737 4 15
1716738 4 9
1716739 4 9
1716740 4 10
1716741 4 10
1716742 4 4
1716743 4 3
1716744 4 6
1716745 4 2
1716746 4 2
1716747 14 3
1716748 4 *
1716749 4 *
1716750 4 *
1716751 4 *
1716752 6 27
1716753 6 21
1716754 6 22
1716755 6 31
1716756 6 30
1716757 6 35
1716758 6 33
1716759 6 38
1716760 6 37
1716761 6 36
1716762 6 40
1716763 6 41
1716764 6 42
1716765 6 39
1716766 6 39
1716767 6 28
1716768 6 16
1716769 6 16
1716770 6 17
1716771 6 15
1716772 6 12
1716773 6 4
1716774 6 12
1716775 6 4
1716776 6 13
1716777 6 9
1716778 6 11
1716779 6 8
1716780 6 23
1716780 10 2
1716781 6 6
1716782 6 5
1716783 6 24
1716784 6 3
1716785 14 5
1716786 14 5
1716787 10 1
1716788 10 1
1716789 10 3
1716790 10 4
1716791 10 5
1716791 12 8
1716792 10 10
1716793 10 11
1716793 12 1
1716794 10 6
1716795 10 12
1716796 10 9
1716797 10 8
1716797 12 11
1716798 10 7
1716799 10 *
1716800 14 7
1716801 8 4
1716802 8 13
1716803 8 9
1716804 8 7
1716805 8 14
1716806 8 15
1716807 8 3
1716809 12 9
1716810 12 3
1716811 12 13
1716812 12 13
1716813 12 14
1716814 12 12
1716815 12 6
1716816 12 5
1716817 12 6
1716818 12 6
1716819 12 6
1716820 12 6
1716821 12 10
1716822 12 16
1716823 12 15
1716824 12 4
1716825 12 2
1716826 12 2
1716827 12 2
1716828 12 2
1716829 12 2
1716830 12 7
1716839 14 6
1716840 14 4
1916950 4 11
1916950 8 10
1916965 4 13
1916965 6 25
1917356 6 18
1917372 2 10
1917372 6 1
1917372 8 1
1921210 4 8
1921210 6 26
1921333 4 14
1921515 6 19
1921958 2 13
1921958 4 5
1921971 4 12
1921978 2 37
1921978 6 43
1921978 8 11
1922127 6 29
1923141 * 2 23
1924940 8 8
1931339 2 34
1935048 * 2 28
1960044 6 2
1960044 8 2
1960151 6 7
1960470 6 20
Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No. Part No. Page No Ref No.
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of
in/lbs in/lbs
in/lbs
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
19
2.1
30
3.4
41
4.6
8-36
20
2.3
31
3.5
43
4.9
10-24
27
3.1
43
4.9
60
6.8
10-32
31
3.5
49
5.5
68
7.7
1/4-20
66
7.6 8 10.9 12 16.3
1/4-28
76
8.6 10 13.6 14 19.0
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Hardware Identification & Torque Specifications
Common Hardware Types
Screw, 1/2 x 2
Body
Diameter
Body
Length
Inside
Diameter
Nut, 1/2”
No
Marks
3/8” Bolt or Nut
Wrench—9/16”
3/8
5/16” Bolt or Nut
Wrench—1/2”
5/16
1/4” Bolt or Nut
Wrench—7/16”
1/4
1/2” Bolt or Nut
Wrench—3/4”
1/2
DIA.
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
Wrench & Fastener Size Guide
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
, meaning the
inside diameter
is 1/2 inch; if a
second number is present it represent the
threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
Nominal size
, or
body diameter
is 1/2 inch; the
second number represents the
threads per inch
(16 in this
example, and the final number is the
body length
of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
1
1/4 3/4
1/2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Loading...