Parts Manual
g
5/14 & 8/14
Series Chipper/Shredders
Attachment
. No. Description
Mf
1694678 8/14 Chipper/Shredder
1694896 814 Chipper/Shredder
1694897 5515 Chipper/Shredder
1694898 5/14 Chipper/Shredder (CE/Export)
1694910 5514 Chipper/Shredder
Rev.
1731143
09/2007
Part No.:
TP 400-4096-01-CS-S
Table Of Content
s
PRODUCT COMPONENTS PAGES
Hopper & Engine Group - Models 5/14 & 8/14 ....................................................................................................
Housing & Rotor Group - Models 5/14 & 8/14 .....................................................................................................
VK 5 Vacuum Kit for 5C, 5/14, & 8/14 Models .....................................................................................................
10
Torque Specification Chart ..................................................................... Inside Back Cover
4
8
Hopper & Engine Group - Models 5/14 & 8/14
pp
pp
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
4096heg
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
4
TP 400-4096-01-CS-S
Hopper & Engine Group - Models 5/14 & 8/14
pp
pp
)
PART NO. DESCRIPTIONREF NO QTY.
SCREW, Hex, Button Hd., 1/4-20 x 3/4 (Qty.10 used on CE models) 1 1960507SM 14
RETAINING STRIP, Hopper Guard 2 1098100SM 1
GUARD, Hopper 3 1095100SM 1
SUPPORT, Hopper Guard 4 1709603SM 1
COLLECTION BAG, 24" x 34" 5 1709403SM 1
HANDLE 6 1729181SM 1
CAPSCREW, Hex, 1/4-20 x 1, Gr. 5 (CE Models Only) 7 1921960SM 8
CAPSCREW, Hex, 5/16-18 x 3-1/4, Gr.5 8 1926106SM 1
DECAL, Danger, Rotating Cutting Blades, Warning, Debris 9 1732181 2
DECAL, Caution, Rotating Cuttinb Blades, Warning, Debris (CE Models Only) 9 1731921 2
DEFLECTOR 10 1729194SM 1
DEFLECTOR, Fixed (CE Models Only) 10 1709556SM 1
DECAL, Caution, Do Not Operate Without Bag Attached (CE Models Only) 11 1731921 2
NUT, Whiz, 5/16-18 12 1931277SM 20
WASHER, Plain, 17/32Plain, 17/32 x 1-1/4 x 5/64 13 1924361SM 2
WHEEL & TIRE ASSEMBLY, 1-3/4 x 12 (5/14 Only) 14 1714250SM 2
WHEEL & TIRE ASSEMBLY, 2-1/4 x 12 (8/14 Only) 14 1714250SM 2
PUSH NUT, 1/2 15 1960519SM 2
CAPSCREW, Hex, 5/16-18 x 5/8 16 1925205SM 10
SCREW, Taptite, 3/8 16 x 1-1/4 17 1928635SM 2
ROD LEG 18 1713099SM 1
CASTING, Chipper Cone, 3" 19 1713272SM 1
NUT, Flange, 2-Way Lock, 1/4-20 (Qty.10 used on CE model) 20 1930642SM 14
WASHER, Plain, 17/64 x 5/18 x 31/64 21 1921319SM 6
SCREW, Round Head, Phillips, 1/4-20 x 1/2 (CE Models Only) 22 1926025SM 2
INSERT, Cone (CE model only) 23 1709729SM 1
CONE, Chipper, Red 24 1709468SM 1
CONE, Chipper, Red (CE Models Only) 24 1709409SM 1
ENGINE PLATE ASSEMBLY 25 1714085SM 1
ENGINE, 5HP, Briggs & Stratton Model # 135212, Type # 0196-01 26 * 1
ENGINE, 8HP, Briggs & Stratton Model # 201412, Type # 9238-72 26 * 1
SHIELD 27 2118403SM 1
LOCKWASHER, 5/16 28 1917356SM 4
CAPSCREW, Hex Head, 5/16-24 x 3/4 29 1921515SM 4
DECAL, 5/14, Simplicity 30 1713214SM 1
DECAL, 8/14, Simplicity Pro 30 1714113SM 1
WASHER, Plain, 1/4 x 1-1/4 x 5/64 (CE Models Only) 31 1960151SM 12
HOPPER HALF, Upper (CE Models Only) 32 1709561SM 2
SAFETY GOGGLES 33 1729013SM 1
NUT, Flange Whiz Lock, 5/16-18 (CE Models Only) 34 1927557SM 2
SCREW, Truss Head, 5/16-18 x 3/4 (CE Models Only) 35 1918249SM 2
HOPPER, Red 36 1713521SM 1
HOPPER, Red (CE Models Only) 36 1713521SM 1
DECAL, Danger, Rotating Cutting Blades, Warning, Debris 37 1732039 2
Footnotes
Note* See your local Briggs & Stratton dealer for service parts.
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
5
TP 400-4096-01-CS-S
Hopper & Engine Group - Models 5/14 & 8/14
pp
pp
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
4096heg
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
6
TP 400-4096-01-CS-S
Hopper & Engine Group - Models 5/14 & 8/14
pp
pp
)
PART NO. DESCRIPTIONREF NO QTY.
DECAL, Caution, Rotating Cuttinb Blades, Warning, Debris (CE Models Only) 37 1731920 2
Footnotes
Note* See your local Briggs & Stratton dealer for service parts.
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
7
TP 400-4096-01-CS-S
Housing & Rotor Group - Models 5/14 & 8/14
pp
pp
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
4096hrg
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
8
TP 400-4096-01-CS-S
Housing & Rotor Group - Models 5/14 & 8/14
pp
pp
)
PART NO. DESCRIPTIONREF NO QTY.
HOPPER LINER 1 1729176SM 1
WASHER, Flat, 5/16 2 1924874SM 4
* LOCKWASHER, Split, 5/16 3 1917356SM 12
CAPSCREW, Hex Head, 5/16-18 x 3/4 4 1921332SM 2
CAPSCREW, Phillips Head, 1/4-20 x 5/8 5 1960507SM 2
NUT, Hex Flange, 5/16-18 6 1931277SM 12
CAPSCREW, Hex Head, 5/16-18 x 1/2 7 1920787SM 8
COVER, Rotor Housing 8 1729174SM 1
KEY, 1/4 Sq. x 2-1/4 9 2805100SM 1
SPACER, Rotor (5/14 Only) (5/14 Only) 10 1729132SM 1
SPACER, Rotor (8/14 Only) (8/14 0nly) 10 1713206SM 1
CHIPPER KNIFE 11 1729148SM 2
* ROTOR, 1" Hub 12 1714177SM 1
CAPSCREW, Socket Head, 5/16-24 x 5/8 13 1729215SM 4
* LOCKWASHER, Split, 3/8 14 1916965SM 7
CAPSCREW, Socket Head, 3/8-24 x 2 15 1729235SM 1
NUT, Hex, 3/8-16 16 1916950SM 2
* CAPSCREW, Hex, Socket Head, w/Patch, 3/8 16 x 2, Gr. 8 17 1960508SM 4
* WASHER, Flat, 7/8 O.D. 18 1924940SM 4
* SPACER, Tube 19 1709614SM 4
* SPACER, 3/4" O.D., 3/4" Long (5/14 Only) (5/14 Only) 20 1709616SM 4
* SPACER, 1" O.D., 33/64" Long (8/14 0nly) (8/14 0nly) 20 1713207SM 4
HAMMER, Triangular 21 1729138SM 2
WASHER, Plain, 1/2 x 1-1/4 x 3/16 (8/14 0nly) (8/14 0nly) 22 1676435SM 4
J HAMMER 23 1729137SM 2
CAPSCREW, Socket Head, 3/8-16 x 5/8 24 1729236SM 2
WASHER, Flat, 5/16 25 1924874SM 2
HOUSING, Rotor 26 1729175SM 1
AXLE ASSEMBLY 27 1729164SM 1
HOUSING, Fan 28 1729160SM 1
CAPSCREW, Socket Head, 5/16-18 x 1/2 29 1729214SM 2
NUT, Nylock, 5/16-18 30 1919438SM 2
DECAL, DANGER - Rotating Cutters/No Hands Below Line 31 1731918 1
DECAL, DANGER - Rotating Cutters/No Hands Below Line (CE Models Only) 31 1731919 1
NUT, Hex Flange Toplock, 1/4-20 32 1930642SM 2
WASHER, Flat, 1/4 33 1921319SM 2
Footnotes
Note* Rotor Kit 1685698 contains Ref. Nos. 2, 17, 19, 22, 23, 26 and 29 (All items are marked with an "*".)
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
9
TP 400-4096-01-CS-S
VK 5 Vacuum Kit for 5C, 5/14, & 8/14 Models
pp
pp
)
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
2_01062B
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
10
TP 400-4096-01-CS-S
VK 5 Vacuum Kit for 5C, 5/14, & 8/14 Models
pp
pp
)
PART NO. DESCRIPTIONREF NO QTY.
ADAPTER 1A 1021100SM 1
ADAPTER (European model only) 1B 1713522SM 1
COUPLER 2 1023100SM 1
Plug 3 1025100SM 1
HOSE, 10" x 4" Dia. 4 1035100SM 1
LEAF TRAY 5 1027100SM 1
NOZZLE, w/Valve Ring 6 1030100SM 1
VALVE RING 7 1024100SM 1
NUT, 1/4-20 8 1960294SM 1
WASHER, 1/4 9 1921319SM 2
SCREW, 1/4-20 x 1 1/2 10 1729223SM 1
HANDLE 11 1026100 1
HANDLE GRIP 12 1028100SM 1
DECAL, Danger 13 1729207SM 1
HOPPER LID (Orange) 14 1709467SM 1
HOPPER LID (Gold) 14 1019100SM 1
HOPPER LID (Red) 14 1709467SM 1
WASHER, Flat 15 1919326SM 3
Footnotes
The above parts group applies to the following Mfg. Nos.:
1694678 - 8/14 Chipper/Shredder
1694896 - 814 Chipper/Shredder
1694897 - 5515 Chi
1694898 - 5/14 Chi
1694910 - 5514 Chipper/Shredder
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
er/Shredder
er/Shredder (CE/Export
11
TP 400-4096-01-CS-S
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
Nut, 1/2”
Inside
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Body
Diameter
Body
Length
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
2.1
20
2.3
27
3.1
31
3.5
66
7.6 8 10.9 12 16.3
76
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
420 571.2
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
Loading...