Simplicity 5020, 5030 User Manual
Specifications and Main Features
- Model: Diesel Tractors 5020, 5030, 9523 and 9528
- Engine Specifications:
- Model US$126: Toyosha (5020 and 9523), Toyosha (5030 and 9528).
- Number of Cylinders: 2
- Fuel Tank: 14 Gallon. Bore 3.62” (92 mm) and 3.82” (97 mm),
- Stroke: 3.74” (95 mm) and 3.94” (100 mm)
- Low Idle RPM: 750 – 800
- High Idle RPM: 2650 – 2750
- Rated Speed RPM: 2500
- Piston Displacement: 77.1 cu in (1263 cm³) (5020 & 9523) and 90.1 cu in (1477 cm³) (5030 and 9528).
- Compression Ratio: 23:1
- Performance:
- Theoretical PTO : 21HP model 5020 and 9523 and 26 HP model 530 and 9528.
- General Specifications:
- Air Cleaner: Donaldson, Dry Type
- Battery: Kobe, 12 V, 70 Amps/hour
- Brake: Internal Expansion Drum Diameter 5.72” (145.2 mm)
- Clutch: Dry Single plate 8.46” (215 mm)
- Differential: 2 pinion spiral helical 4.33:1 (5020 and 9523) and 3.9:1 (5030 and 9528).
- Electrical System:
- Alternator: Hitachi LR115-58 Output: 12V 15 A.
- Voltage Regulator: Hitachi, Model TRIZ-34
- Tire Size:
Front: 4.00 x 12 (5020 & 9523), 5.00 x 15 (5030 & 9528)
Rear: 9.5 x 24 (5020 & 9523), 12.4 x 24 (5030 & 9528)
- Dimensions:
Overall Length: 98.9” (2512 mm) (5020 & 9523), 100.4” (2550 mm) (5030 & 9528)
Height to top of Steering Wheel: 51.3” (1303 mm) (5020 & 9523), 53.7” (1365 mm) (5030 & 9528)
Wheel Base: 59.8” (1519 mm) (5020 & 9523), 61.8” (1570 mm) (5030 & 9528)
Frequently Asked Questions
- Q: What is the horsepower of the Tactor Model 5020?
A: The Model 5020 has a maximum observed PTO horsepower of 21 HP (15.7 kW).
- Q: What air cleaner is fitted to this tractor?
A: A dry type air cleaner manufactured by Donaldson is used on the tractor.
- Q: How frequent should the serviced diesel engine oil, be changed?
A: Every after operating for 100 hours, change the engine oil, while after operating for the initial 50 hours, change it too.
- Q. What is the appropriate pressure range for the rear tires of the Model 5030?
A: For the rear tires (12.4 x 24), the tire pressure is advocated to be in the range of 12 PSI (83 kPa) and 18 PSI (124 kPa).
- Q. What is the first step that must be performed prior to starting the tractor?
A: Make sure the transmission shift lever is situated in neutral, PTO is not engaged and brakes are active.
User Manual
Loading...