Simplicity 386777, 2690445, 2690444, 385777, 5022811SM 1 User Manual
...
Parts Manual
g
Citation
Series Zero-Turn Riders & Mower Decks
21HP Product
. No. Description
Mf
2690444 Citation, 21HP Briggs & Stratton Zero Turn Rider w/48"
23HP Product
Mfg. No. Description
2690445 Citation, 23HP Briggs & Stratton Zero Turn Rider w/52"
Mower
Mower
Rev.
1733092
8/2008
Part No.:
TP 400-7287-S-CI-S
Table Of Content
s
PRODUCT COMPONENTS PAGES
Main Frame & Front Suspension Group ..............................................................................................................
Rear Bumper Group .............................................................................................................................................
Engine & PTO Group ...........................................................................................................................................
Instrument Control Panel Group ..........................................................................................................................
Pump Drive Group ...............................................................................................................................................
Motion Control Group - S/N: 201317250 & Below ...............................................................................................
Motion Control Group - S/N: 201317251 & Above ..............................................................................................
Hydraulic Group ...................................................................................................................................................
Hydraulic Mount Group ........................................................................................................................................
Electrical Group ....................................................................................................................................................
Seat, Mount & Floor Group ..................................................................................................................................
Fuel Supply Hose Group & Tank Replacement Parts Group ..............................................................................
Fuel Tank & Mount Group ....................................................................................................................................
Parking Brake Group ............................................................................................................................................
Rear Suspension Group ......................................................................................................................................
Deck Lift Group - S/N: 2013202961 & Below ......................................................................................................
Deck Lift Group - S/N: 2013202962 & Above ......................................................................................................
Wheel & Tire Group .............................................................................................................................................
Decals - Brand & Model .......................................................................................................................................
Decals - Safety & Operation ................................................................................................................................
48" & 52" Mower Deck - Hanger Chains ..............................................................................................................
48" & 52" Mower Deck - Housing, Cover, Spindle & Blade .................................................................................
48" & 52" Mower Deck - Pulleys, Belts & Idler Arm .............................................................................................
48" & 52" Mower Deck - Rollers ...........................................................................................................................
48" & 52" Mower Deck - Spindle Service Parts Group ........................................................................................
10
12
14
18
22
26
28
30
32
34
36
38
40
44
48
50
52
54
56
58
60
62
Torque Specification Chart ..................................................................... Inside Back Cover
4
6
8
Main Frame & Front Suspension Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287frm0
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
4
TP 400-7287-S-CI-S
Main Frame & Front Suspension Group
PART NO. DESCRIPTIONREF NO. QTY.
MAIN FRAME ASSEMBLY (Serial No.: 2013170250 & Below) 1 5400257CSM 1
GREASE SEAL 2 5021072SM 2
COTTER PIN, 1/8" X 1-1/4" 3 5025203X10SM 2
SCREW, 5/16-18 X 1 FLAT HD SC 4 5025303SM 8
NUT, 5/16-18 Hex Nylon Lock 5 5025057SM 8
BOLT, 3/8-16 X 1-3/4" 6 5025013X14SM 2
NUT, 3/8-16 Hex Nylock Flange 7 5025394SM 4
BOLT, 3/8-16 X 4" 8 5025013X32SM 2
FRICTION PLATE 9 5045990SM 2
SHOCK & SPRING ASSEMBLY 10 5023483SM 2
BEARING, Tapered Roller 11 5020884SM 4
CAP 12 5021073SM 2
CASTER YOKE 13 5047049CSM 2
NUT, 3/4-16 Hex Slotted 14 5025104SM 2
WASHER, 3/4" SAE 15 5025160SM 6
NUT, 3/4-16 Hex Nylon Lock 16 5025284SM 1
SPACER, .75 X 1.00 X 2.38 17 5047489SM 1
BOLT, 3/4-16 X 6-1/2" 18 5025265X52SM 1
ASSM, PIVOTING FRONT END (Includes Ref. #'s 20 and 21) 19 5401410SM 1
PIVOT BEARING 20 5022852SM 1
PIVOT BEARING 21 5100358SM 1
WASHER, 3/8" SAE 22 5025156SM 4
WASHER, 3/8" FENDER 23 5025165SM 6
WELD, PIVOTING FRONT END - ORG (Serial No.: 2000676809 & Above) 24 5402536CSM 1
CAP, CASTER SPINDLE LOW PROFILE (Serial No.: 2000676809 & Above) 25 5100882SM 2
NUT, 3/4-16 HEX JAM NYLON LOCK (Serial No.: 2000676809 & Above) 26 5025448SM 2
BELLEVILLE WASHER, 1.500 X .755 (Serial No.: 2000676809 & Above) 27 5025449SM 4
BEARING CUP (Serial No.: 2000676809 & Above) 28 5020883SM 4
WELD, CASTER YOKE - ORG. (Serial No.: 2000676809 & Above) 29 5402208CSM 2
BOLT, 1/4-28 X 1/2, GD5 YZ (Serial No.: 2000676809 & Above) 30 5025457SM 2
WELD, Main Frame Assembly (Serial No.: 2013170251 & Above) 31 5404316CSM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
5
TP 400-7287-S-CI-S
Rear Bumper Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287bmp1
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
6
TP 400-7287-S-CI-S
Rear Bumper Group
PART NO. DESCRIPTIONREF NO. QTY.
MAIN FRAME 1- HEAT SHIELD 2 5401174CSM 1
BUMPER 3 5403268CSM 1
PLATE, SEAT BELT ANCHOR - LH 4 5400844CSM 1
PLATE, SEAT BELT ANCHOR - RH 5 5400847CSM 1
WASHER, 1/2" SAE 6 5025158SM 4
NUT, 1/2-13 HEX NYLOCK FLANGE 7 5025396SM 6
BOLT, 1/2-13 X 3-1/4" GD5 8 5025017X26SM 4
CARB PROTECTOR PLATE 9 5061725CSM 1
PLUG, PANEL, 1.25 BLACK 10 5023484SM 6
ROLL BAR TOP LOOP 11 - 1
ROLL BAR POST, RH 12 - 1
ROLL BAR POST, LH 13 - 1
WASHER 3/8" SAE 14 5025156SM 2
BOLT, 3/8-16 X 1" GD5 15 5025013X8SM 2
NUT, 3/8-16 X 1" GD5 16 5025394SM 2
BOLT, 5/16-18 X 3/4" GD5 17 5025011X6SM 4
NUT, 5/16-18 HEX NYLOCK FLANGE 18 5025392SM 4
BOLT, 1/2-13 X 1-3/4 GD5 YZ 19 5025017X14SM 2
NUT, 1/2 X 13 HEX NYLOCK FLANGE 20 5025396SM 2
SEAT BELT ASSEMBLY, STANDARD 21 5100139SM 1
SEAT BELT ASSEMBLY, EXTRA LONG 21 5100397SM 1
ROLL BAR HARDWARE BAG 22 5100377SM 1
PIN, HITCH, BLACK W/ PLASTIC LANYARD 23 5100079SM 2
RUBBER BUMPER 24 5100383SM 2
SCREW, 1/2-13 X 1.00, SHCS 25 5100267SM 2
*BOLT 26 - 2
*NUT 27 - 2
ROPS COMPLETE IN BOX, IS1500 28 5100186SM 1
WASHER, 5/16"SAE 29 5025155SM 4
SPACER, .52 X 1.00 X .75 30 5045178SM 1
SPACER, .515 X 1.00 X .218 31 5100520SM 1
CAP, VINYL 32 5101049SM 1
RUBBER WASHER (Not shown) 33 5100545SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
7
TP 400-7287-S-CI-S
Engine & PTO Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287engb0
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
8
TP 400-7287-S-CI-S
Engine & PTO Group
PART NO. DESCRIPTIONREF NO. QTY.
MAIN FRAME 1- ENGINE, 21HP Briggs & Stratton (Model 385777) 2- 1
ENGINE, 23HP Briggs & Stratton (Model 386777) 2- 1
CRANKSHAFT PULLEY 3- 1
SPACER, 1.13 X 1.75 X .97 4 5046845SM 1
CLUTCH 5 5023432SM 1
SPACER, .45 X 1.88 X .38 6 5045475SM 1
BOLT, CRANKSHAFT, 7/16" X 2" 7 5044853SM 1
KEY, 1/4" SQ. X 3-1/2" 8 5050407X28SM 1
MUFFLER 9 5100361SM 1
CLUTCH ANCHOR PLATE 10 5061857CSM 1
SPACER, .51 X .75 X .56 11 5047027SM 2
CLUTCH ANCHOR PAD 12 5043636SM 1
WASHER, 5/16" SAE 13 5025155SM 11
BOLT, 5/16-18 X 1" 14 1921333SM 5
WASHER, Clutch Anchor 15 5044617SM 3
NUT 5/16-18 Hex Nylon Lock 16 5025057SM 3
NUT, 5/16-18 Hex Nylock Flange 17 5025392SM 8
OIL DRAIN HOSE 18 5048681SM 1
CLAMP, Vinyl Insulated 19 5021500SM 1
BOLT, 1/4-20 X 3/4" 20 1923341SM 1
NUT, 1/4-20 Hex Serrated Flange 21 5025126SM 1
BOLT, 5/16-18 X 1-3/4" 22 1922127SM 4
BOLT, 5/16-18 X 1-1/2" 23 502501112SM 2
WASHER, 5/16" Internal Tooth Lock 24 5025188SM 4
GROMMET, 7/8" 25 5021379SM 1
SCREEN, SPARK ARRESTER (NOT SHOWN) 26 5101641SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
9
TP 400-7287-S-CI-S
Instrument Control Panel Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287ins0
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
10
TP 400-7287-S-CI-S
Instrument Control Panel Group
PART NO. DESCRIPTIONREF NO. QTY.
SWITCH RETAINER RING 1 5022222SM 1
NUT, 3/8-24 Hex 2 5025039SM 1
SWITCH, LIGHT 3 1703799SM 1
SCREW, Allen Head, 1/4-20 x 1/2 4 5025299X4SM 3
BOLT, 1/4-20 X 5/8" GD5 YZ (S/N: 2012617338 & Below) 5 5025010X5SM 2
NUT, 1/4-20 Hex Nylon Lock (S/N: 2012617338 & Below) 6 5025095SM 2
SWITCH, Ignition, Complete 7 1686734SM 1
CABLE, Choke Control, 47" 8 5046501SM 1
SWITCH, PTO 9 1722887SM 1
CABLE, Throttle Control, 40" (S/N: 2012617338 & Below) 10 5048231SM 1
HOURMETER, Digital 11 5100978SM 1
CONTROL PANEL (S/N: 2012617338 & Below) 12 5061361ASM 1
O-RING, 7/8" ID X 1/16" W 13 5022269SM 1
PLATE, CONTROL PANEL - BLACK (S/N: 2012617339 & Above) 14 5403402ASM 1
LEVER, THROTTLE CONTROL (S/N: 2012617339 & Above) 15 5101118SM 1
CABLE, THROTTLE, 42" (S/N: 2012617339 & Above) 16 5101073SM 1
KNOB, THROTTLE CONTROL (SV) (S/N: 2012617339 & Above) 17 5046360X1SM 1
SCREW, #10-24 X 3/4" ROUND PHILLIPS (S/N: 2012617339 & Above) 18 5025179X6SM 2
NUT, #10-24 HEX NYLON LOCK (S/N: 2012617339 & Above) 19 5025271SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
11
TP 400-7287-S-CI-S
Pump Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287pdr0
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
12
TP 400-7287-S-CI-S
Pump Drive Group
PART NO. DESCRIPTIONREF NO. QTY.
MAIN FRAME 1- KEY, 5MM SQ. x 25MM w/ Round Ends 2 5023254SM 2
CRANKSHAFT PULLEY 3 5047075SM 1
BELT, PUMP DRIVE, BANDED 4 5100555SM 1
NUT, 3/8-16 Hex 5 1916950SM 2
EYE BOLT, 3/8-16 X 6" 6 5021812SM 1
BOLT, 3/8-16 X 4" 7 5025013X32SM 1
BUSHING, Brass 8 5022157SM 2
NUT, 3/8-16 Nylock Flange 9 5025394SM 3
WASHER, 3/8" GR. 9 FLAT 10 5025293SM 1
BOLT, 3/8-16 X 2-1/4" 11 5025013X18SM 1
BOLT, 3/8-16 X 1-3/4" 12 5025013X14SM 1
SPACER, .45 X 1.88 X.38 13 5045475SM 1
NUT, 3/8-16 Hex Side Lock 14 5025100SM 1
SPRING, Extension, Swivel End 15 5022847SM 1
PULLEY, Idler (Single Flange) 16 5022621SM 1
PUMP DRIVE IDLER ARM 17 5046430CSM 1
SPACER, .39 X 1.00 X 2.55 18 5045135SM 1
WASHER, 3/8 x 1-3/4 19 5025305SM 1
BOLT, 1/4-20 X 1" 20 5025010X8SM 4
PULLEY, Pump Drive 21 5022586SM 2
BUSHING, Tapered Hub 22 5022587SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
13
TP 400-7287-S-CI-S
Motion Control Group - S/N: 201317250 & Below
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287mcg0
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
14
TP 400-7287-S-CI-S
Motion Control Group - S/N: 201317250 & Below
PART NO. DESCRIPTIONREF NO. QTY.
MAIN FRAME 1- BOLT, 5/16-18 X 1" 2 5025011X8SM 6
WASHER, 5/16" Lock 3 5025170SM 4
WASHER, 5/16" SAE 4 5025155SM 8
CLEVIS PIN, 3/8" X 1-1/4" 5 5025213X10SM 2
HAIRPIN CLIP 6 5025211SM 2
BOLT, 5/16-18 X 1-1/4" 7 5025011X10SM 4
BOLT, 5/16-18 X 1-1/8" 8 5025011X9SM 4
BOLT, 3/8-16 X 2-1/2" 9 5025013X20SM 4
BOLT, 3/8-16 X 3" 10 5025013X24SM 2
WASHER, 3/8" SAE 11 5025156SM 6
NUT, 3/8-16 Hex Nylock Flange 12 5025394SM 10
NUT, 3/8-16 Hex Nylon Lock 13 5025096SM 4
BOLT, 1/4-20 X 3/4" 14 5025010X6SM 4
WASHER, 1/4" SAE 15 5025154SM 4
BOLT, 3/8-16 X 1" 16 5025013X8SM 2
BOLT, 3/8-16 X 1-1/4" 17 5025013X10SM 2
BOLT, 3/8-16 X 1-3/4" 18 5025013X14SM 4
SCREW, #10-24 X 1/2" 19 5025179X4SM 4
NUT, #10-24 Hex 20 5025029SM 4
MOTION CONTROL GUARD 21 5061838CSM 2
BALL JOINT, 5/16-24 Female 22 5021146SM 2
HYDRO CONTROL ROD 23 5046420SM 2
BUSHING, Flange 24 5023260SM 2
NEUTRAL CONTROL ROD 25 5049969SM 2
CLEVIS, 3/8-24, Plastic 26 5021171SM 2
COLLAR, 3/8" Set 27 5010546SM 2
SPRING, Compression 28 5022645SM 2
NUT, 3/8-24 Hex 29 5025035SM 2
DAMPENER (S/N: 2012619803 & Below) 30 5100728SM 2
SPACER, .39 X .63 X 1.50 31 5048264SM 6
NEUTRAL LOCK PLATE, RH 32 5049872CSM 1
NEUTRAL LOCK PLATE, LH 33 5049873CSM 1
SWITCH, Plunger, NO/NC 34 5022095SM 2
CONTROL ARM MOUNT 35 5047004SM 2
BEARING, Flange 36 5021499SM 2
BALL JOINT, 5/16-24 Female LH 37 5022628SM 2
NUT, 5/16-24 Hex LH 38 5023212SM 2
NUT, 5/16-24 Hex 39 5025033SM 6
BODY CLIP, 1/4-20 40 5022665SM 4
NUT, 5/16-18 Hex Nylon Lock 41 5025057SM 2
BOLT, M8-1.25 x 35MM (S/N: 2012619803 & Below) 42 5025335SM 4
NUT, M8-1.25 Hex Nylon Lock (S/N: 2012619803 & Below) 43 5025354SM 4
NUT, M8-1.25 Hex Serrated Flange (S/N: 2012619803 & Below) 44 5025355SM 4
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
15
TP 400-7287-S-CI-S
Motion Control Group - S/N: 201317250 & Below
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
287mcg0
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
16
TP 400-7287-S-CI-S
Motion Control Group - S/N: 201317250 & Below
PART NO. DESCRIPTIONREF NO. QTY.
NUT, 5/16-18 Hex Large Serrated Flange 45 5025139SM 4
NUT, 5/16-18 Hex Small Serrated Flange 46 1931277SM 8
GRIP, Foam 47 5022068SM 2
BEARING, Flange 48 5021098SM 2
CONTROL SHAFT, RH (S/N: 2012619803 & Below) 49 5049843CSM 1
CONTROL SHAFT, LH (S/N: 2012619803 & Below) 50 5049842CSM 1
MOTION CONTROL HANDLE, RH 51 5047056CSM 1
MOTION CONTROL HANDLE, LH 52 5047055CSM 1
HYDRAULIC PUMP 53 - NUT, 5/16" -18 NYLOCK FLANGE 54 5025392SM 6
DAMPENER, CONTROL, #(P6709/P3610) (S/N: 2012619804 & Above) 55 5100940SM 2
BALL STUD, 5/16 X .50, (# PC-477-2) (S/N: 2012619804 & Above) 56 5100941SM 4
WELD, CONTROL SHAFT, LH - ORG (S/N: 2012619804 & Above) 57 5403640CSM 1
WELD, CONTROL SHAFT, RH - ORG (S/N: 2012619804 & Above) 58 5403641CSM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
17
TP 400-7287-S-CI-S
Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301479
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
18
TP 400-7287-S-CI-S
Motion Control Group - S/N: 201317251 & Above
PART NO. DESCRIPTIONREF NO. QTY.
ROD, NEUTRAL RETURN 1 5100947SM 2
SPRING, REVERSE RETURN 2 5022645SM 2
BUSHING, NYLON 3 5023260SM 2
BUSHING, FLANGED .375 X .630 X 2.00 4 5100942SM 2
COLLAR, 3/8" SET 5 5010546SM 4
WASHER, 3/8 SAE 6 5025156SM 2
PIN, HAIR, .0915 X 1-7/8 7 5025210SM 2
BALL STUD, 5/16 X .50,# PC-477-2) 8 5100941SM 4
DAMPENER, CONTROL,#(P6709/P3610) 9 5100940SM 2
NUT, 5/16-18 HEX NYLOCK FLANGE 10 5025392SM 2
ROD, HYDRO LINKAGE 11 5100946SM 2
NUT, 5/16-24 HEX, LH 12 5023212SM 2
BALL JOINT, 5/16-24, LH FEMALE 13 5022628SM 2
WELD, SHAFT MOTION CONTROL-RH-IS500-ORG 14 5402589CSM 1
BOLT, 5/16-18 X 1 GD5 YZ 15 5025011X8SM 6
WASHER, 5/16" SAE 16 5025155SM 8
BOLT, 5/16-18 X 1-1/4" GD5 YZ 17 5025011X10SM 2
BALL JOINT, 5/16-24, FEMALE 18 5021146SM 2
NUT, 5/16-24 HEX 19 5025033SM 6
BEARING, BRONZE FLANGE, 3/4 20 5021098SM 2
BOLT, 3/8-16 X 1" GD5 YZ 21 5025013X8SM 2
NUT, 3/8-16 HEX NYLOCK FLANGE 22 5025394SM 14
BEARING, FLANGE 23 5021499SM 2
BOLT, 3/8-16 X 1-1/4" GD5 24 5025013X10SM 2
NUT, 3/8-16 HEX NYLON LOCK 25 5025096SM 4
BOLT, 3/8-16 X 1-3/4" GD5 26 5025013X14SM 8
MOUNT, CONTROL ARM 27 5047004SM 2
WELD, NEUTRAL LOCK - RH - IS500-ORG 28 5402595CSM 1
WELD, NEUTRAL LOCK - LH - IS500-ORG 29 5402594CSM 1
SWITCH, PLUNGER, N.O./N.C. 30 5022095SM 2
SCREW, #10-24 X 1/2 ROUND PHILLIPS 31 5025179X4SM 4
NUT, #10-24 HEX 32 5025029SM 4
BOLT, 5/16-18 X 1-1/8" GD5 33 5025011X9SM 2
NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) 34 5025127SM 8
BOLT, 3/8-16 X 2-1/2" GD5 YZ 35 5025013X20SM 4
SPACER, .39 X .63 X 1.50 36 5048264SM 6
BOLT, 3/8-16 X 3" GD5 YZ 37 5025013X24SM 2
WELD, HANDLE MOTION CONTROL-LH 38 5047055CSM 1
WELD, HANDLE MOTION CONTROL-RH 39 5047056CSM 1
WASHER, 5/16" LOCK 40 5025170SM 4
GRIP, FOAM, 3/4 ID, 16 LONG 41 5022068SM 2
GUARD, RUBBER MOT CTRS - IS500Z 42 5100948SM 2
PUSH RIVET (TREE TYPE), BLACK 43 5025431SM 4
SPRING, EXTENSION 44 5020639SM 2
Footnotes
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
19
TP 400-7287-S-CI-S
Motion Control Group - S/N: 201317251 & Above
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
5301479
The above parts group applies to the following Mfg. Nos.:
2690444 - Citation
2690445 - Citation
Briggs and Stratton Yard Power Products Group
2008Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
20
TP 400-7287-S-CI-S
Loading...