Simplicity 500 Series, 2500 Series, Regent Series, 515G, 515 Parts Manual

Parts Manual

Rev. 10/2002

TP 400-2588-02-RG-SMA

REGENT / 500 / 2500

SERIES LAW N TRACTORS & MOWER DECKS

15HP GEAR TRACTORS

Mfg. No. Description

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

15HP HYDRO TRACTORS

Mfg. No. Description

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

MOWER DECKS

Mfg. No. Description

1693920 38” Mower Deck
1693930 38” Mower Deck (Export)
1693959 38” Mower Deck
1693963 38” Mower Deck (Export)

© Copyright 2001 Simplicity Manufacturing, Inc.

All Rights Reserved. Printed In USA.

MANUFACTURING, INC.
500 N Spring Street / PO Box 997

Port Washington, WI 53074-0997 USA

1

TP-400-2588-02-RG-SMA

Table of Contents

LAWN TRACTOR COMPONENTS PAGES

Frame Group.............................................................2

Steering Group..........................................................4

Engine Group - 15HP Briggs & Stratton....................6

Gear Transaxle - Peerless Model MST 205-515A

Transmission Group...............................................8

Transmission SERVICE PARTS -

Peerless Model MST 205-515A Transaxle...........10

Hydro Transaxle - Tuff Torq K-46AA

Transmission Group.............................................14

Transmission SERVICE PARTS -

Tuff Torq K-46AA Transaxle..................................16

Controls Group .......................................................20

Electrical Group.......................................................22

Hood, Grill & Dash Group .......................................24

Seat Deck Group .....................................................26

Wheels & Tires Group.............................................28

Decals - Safety & Common.....................................30

Decals - Brand & Model..........................................32

MOWER DECK COMPONENTS

38” Mower Deck - Housing, Arbors & Blades .........34

38” Mower Deck - Height Adj. & Roller Bar ............36

38” Mower Deck - Belt, Idler Arm & Hitch ..............38

38” Mower Deck - Housing, Arbors & Blades .........40

38” Mower Deck - Height Adj. & Roller Bar ............42

38” Anti-Blowout Baffle Kit .....................................46

REFERENCE INFORMATION

Torque Specification Chart..............Inside Back Cover

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

2

TP-400-2588-02-RG-SMA

Frame Group

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985855

Insert Must
Face Out

3

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

3

7

8

9

6

5

4

10

10

21

21

2

1

11

12

13

12

16

17

14

13

15

24

23

21

19

15

13

18

20

21

22

3

TP-400-2588-02-RG-SMA

Frame Group

1 1723077 1 FRAME ASSEMBLY
2 1715015 1 PLUG, Hole
3 1714418 1 PAD, Footrest RH, (Hydro Only)
3 1715016 1 PAD, Footrest RH, (Gear Only)
4 1714417 1 PAD, Footrest LH
5 1704351 12 FASTENER, Panel
6 1935255 4 NUT, Speed 5/16-18
7 1715796 1 WRAPPER ASSEMBLY, Gear
8 1930591 4 SCREW, Hex Head Flange Lock, 5/16-18 x 3/4 (Gear Only)

9 1723021 1 WRAPPER ASSEMBLY, Hydro
10 1930591 1 CAPSCREW, Hex Head Flange Whiz Lock, 5/16-18 x 3/4 (Hydro Only)
11 1719951 1 BRACKET, (Gear Only)
12 1920328 2 CAPSCREW, Hex Head, 1/2-13 x 1/2
13 1918431 3 WASHER
14 1709235 1 SPACER
15 1930644 2 NUT, Hex Head, 1/2-13
16 1721013 1 CARRIER ASSEMBLY, Hydro
16 1722508 1 CARRIER ASSEMBLY, Gear
17 1717286 1 SPACER
18 1713400 1 BAR, Torsion, Gear
18 1717424 1 BAR, Torsion, Hydro
19 960641 1 NUT, Hex Head ALUM Insert, 3/8-16
20 1924356 1 WASHER
21 176440 6 BUSHING
22 1719868 1 SPACER
23 1719869 1 "J" HOOK, Hitch
24 1960614 1 CAPSCREW, Hex Head, 3/8-16 x 3, G8

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

4

TP-400-2588-02-RG-SMA

Steering Group

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985576AB

Note: See
Wheels & Tires
Group

10

2

1

3

4

5

6

8

15

16

17

18

19

14

21

10

24

25

23

26

27

29

20

32

33

28

13

9

7

14

25

14

22

10

22

19

10

24

12

11

12

30

31

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

5

TP-400-2588-02-RG-SMA

Steering Group

1 1722738 1 STEERING WHEEL

2 1722319 1 CAP, Steering Wheel

3 1714400 1 TUBE, Cover

4 1960540 1 PIN, Spring

5 1723051 1 SHAFT & PINION ASSEMBLY

6 1931350 2 CARRIAGE BOLT, 3/8-16 x 1

7 1703508 1 PLATE, Mounting

8 1928352 2 NUT, Hex Whiz Lock, 3/8-16

9 176440 1 BUSHING, 3/4, Nylon
10 1960114 5 WASHER, 3/4
11 1919438 1 NUT, Hex Lock, 5/16-18
12 1933468 2 WASHER, 5/16
13 1666001 2 BUSHING, 3/4, Powered Metal
14 1611710 4 RING, Clipring Extension
15 1920415 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
16 1922611 1 WASHER, 3/8
17 1723072 1 SHAFT & GEAR ASSEMBLY
18 1713469 1 LINK, 19.66" Long
19 1930645 3 NUT, Hex Flange Lock, 3/8-16
20 1931335 1 CARRIAGE BOLT, 5/16-18 x 1
21 1721472 1 ARM & SPACER ASSEMBLY, LH Splined
22 1960160 1 WASHER, 3/4
23 1919314 1 PIN, Cotter
24 1721542 2 SPINDLE & CUP ASSEMBLY
25 1713791 2 SPACER
26 1722484 1 ROD, Tie
27 1721473 1 ARM & SPACER ASSEMBLY, RH Splined
28 1664847 2 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4
29 1960268 2 CARRIAGE BOLT, 3/8-16 x 1-1/4
30 1921221 1 CAPSCREW, Hex Head, 5/16-18 x 1-1/2
31 1673796 1 SPACER
32 1710437 1 SPACER
33 1935048 1 NUT, Hex Flange Lock, 5/16-18

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

6

TP-400-2588-02-RG-SMA

Engine Group - 15HP Briggs & Stratton

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

E986029

Note:
Orientation
of Key

12

17

13

2

3

16

20

18

19

21

11

10

9

8

6

7

16

13

16

22

23

26

25

24

22

30

33

38

1

41

36

39

40

43

42

4

5

15

14

44

32

31

27

28

29

34

35

36

37

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

7

TP-400-2588-02-RG-SMA

Engine Group - 15HP Briggs & Stratton

1 1708405 1 VALVE-SHUT OFF

2 920427 1 LOCKWASHER, External Tooth 3/8

3 916950 1 NUT, Hex 3/8-16

4 1723212 1 SEAL, Foam

5 1723213 1 SEAL, Foam

6 173206 1 FILTER, Fuel

7 960112 2 CLAMP, Hose Type E

8 1657575 1 HOSE, 12" Long

9 1715897 1 KNOB, Slot
10 1960498 2 CAPSCREW, Hex Washer Head 1/4-14 x 5/8
11 1707388 1 CABLE, Throttle Control, 14~ Long
12 1 ENGINE-15/16/17HP B&S INTEK SINGLE
13 1930598 3 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x 1-1/2
14 171241 1 KEY, Hydro Only
15 1714764 1 PULLEY, Gear Only
15 1723497 1 PULLEY, Hydro Only
16 933263 3 WASHER
17 960361 1 CAPSCREW, Hex Washer Head, Taptite, 3/8-16 x 2
18 1918199 1 LOCKWASHER, 7/16
19 1960370 1 CAPSCREW, 7/16-20 x 2-1/2
20 1719456 1 PULLEY, 5.40 O.D.
21 1719460 1 GUIDE-BELT
22 1935255 4 NUT, Speed 5/16-18
23 1717993 1 DUCT, Muffler
24 1930595 2 CAPSCREW, Hex Flange Lock, 5/16-18 x 1-1/4
25 1705248 2 PIVOT
26 1705249 2 SPACER
27 1723337 1 INSULATION, LH
28 1921333 1 CAPSCREW, 5/16-18 X 1
29 1919381 1 WASHER
30 1930591 2 CAPSCREW, Hex Flange Lock, 5/16-18 x 3/4
31 1723338 1 INSULATION, RH
32 1723336 1 INSULATION
33 1715006 1 DUCT,Muffler, Upper
34 1715509 1 STRAP, Torque
35 1919326 1 WASHER
36 1917356 3 LOCKWASHER, 5/16
37 1917372 1 NUT, Hex 5/16-18
38 1924856 4 CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1/2
39 1927428 2 CAPSCREW, Hex Washer Head, Taptite, 1/4-20 x 3/8
40 1717429 1 MUFFLER
41 1936228 2 CAPSCREW, 5/16-18 x 3/4, G8
42 1720567 1 PIPE, Exhaust
43 1650670 1 GASKET

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

* See your local Briggs and Stratton distributor for parts and service.

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

8

TP-400-2588-02-RG-SMA

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

Transmission Group - Gear

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985850

5

4

6

44

262

1

46

45

35

30

41

42

43

47

44

48

40

15

9

11

37

39

38

37

29

29

36

3130

35

34

33

32

28

27

29

313130

21

24

23

22

21

25

26

17

16

14

7

13

11

10

12

9

8

92018

253

19

49

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear

1693953 2515, 15HP Gear (Export)

9

TP-400-2588-02-RG-SMA

Transmission Group - Gear

1 1931333 1 CARRIAGE BOLT, 5/16-18 x 3/4

2 1714536 2 PULLEY

3 1924359 2 WASHER

4 1713843 1 KNOB

5 1714756 1 ROD

6 156302 1 SPRING, Extension

7 1664789 1 V-BELT

8 1916950 1 NUT, Hex 3/8-16

9 1916965 2 LOCKWASHER, 3/8
10 1920415 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4
11 1924940 2 WASHER
12 1719595 1 GUIDE, Belt
13 927103 1 RING, Shaft
14 1714764 1 PULLEY & HUB ASSEMBLY
15 1678341 1 SPRING, Extension
16 1960638 1 NUT, Speed
17 1717749 2 KEY
18 960202 4 WASHER
19 927794 2 RING, Shaft
20 1715043 4 SPACER
21 960551 6 SCREW, Hex Washer Head Taptite, 5/16-18 x 2-1/2
22 1919381 2 WASHER
23 1716103 2 ANCHOR, Torsion Bar
24 1927557 2 NUT, Hex Head Whiz Lock, 5/16-18
25 1930601 2 SCREW, Hex Washer Head Taptite, 5/16-18 x 5/8
26 1722544 1 TRANSMISSION ASSEMBLY
27 1960555 1 CARRIAGE BOLT, 5/16-18 x 1-1/2
28 1714556 1 LEVER, Shift
29 1960223 3 CARRIAGE BOLT, 5/16-18 x 1-1/4
30 1919438 5 NUT, Hex Lock, 5/16-18
31 1715029 1 LINK, Shift Upper
32 1921319 1 WASHER
33 1916964 1 LOCKWASHER, 1/4
34 1922234 1 CAPSCREW, Hex Head, 1/4-28 x 5/8
35 1917372 2 NUT, Hex, 5/16-18
36 1715028 1 LINK, Shift, Lower
37 1663114 2 BUSHINGS
38 1660735 1 BELLCRANK ASSEMBLY w/Bushings (Incl. Ref ??)
39 921133 1 FITTING, Grease
40 1921965 1 CAPSCREW, Hex Head, 3/8-16 x 3/4
41 1919326 2 WASHER
42 1719824 1 SPRING-Compression
43 1719825 1 SPRING-Compression
44 1918448 2 PIN, Cotter
45 1917356 1 LOCKWASHER, 5/16
46 1720293 1 GUARD, Belt
47 1714767 1 ROD
48 1918447 1 PIN, Cotter
49 905123 1 KEY, Woodruff #9

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear

1693953 2515, 15HP Gear (Export)

10

TP-400-2588-02-RG-SMA

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

REFERENCE: Transmission Service Parts - Peerless Model MST 205-515A Transaxle

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

1722544

1

3

25A

25

85

72A

72

27

29

21

22

20

29

29

29

13

66

32

12

28

87

34

65

64

53

34

30

30

30

30

52

51

50

49

18

83

76

77

67

338

9

7

29A

10

71B

35

63

35

60

59

58

57

69

56

11

4

35A

29B

35A

29B

6A

70

5

6

157

73

75

157

73

75

58

31

13

31

13

6226

6226

14

17

15

661447

67

36

37

44

71

41

40

46

42

43

42A

45

82

180

150

31A

31A

48

2

39

38

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear

1693953 2515, 15HP Gear (Export)

11

TP-400-2588-02-RG-SMA

REFERENCE: Transmission Service Parts - Peerless Model MST 205-515A Transaxle

0 778365 1 Spur Gear (15 teeth-steel)

1 772144 1 Transaxle Cover

2 2 Needle Bearing 5/8” ID

3 770128 1 Transaxle Case

4 776395 1 Countershaft

5 776409 1 Output Shaft

6 778364 1 Spur Gear (38 teeth)

7 778330 1 Spur Gear (11 teeth-steel)

8 2 Shift Key

9 784352 1 Shift Collar
10 784378 1 Shift Rod & Fork
11 778334 1 Bevel Gear (30 teeth)
12 778309 1 Input Bevel Pinion (13 teeth)
13 778327 2 Bevel Gear (16 teeth-steel)(Incl. 14)
14 778327 2 Bevel Gear (16 teeth-steel)(Incl. 13)
15 1 Ring Gear (43 teeth)
17 786139 1 Drive Pin
18 786102 1 Spacer
20 792077 1 Ball 5/16” dia
21 792078 1 Set Screw 3/8-16 x 3/8”
22 792079 1 Spring
25 16 Screw 1/4-20 x 1-1/4”
26 792125 4 Retaining Ring (pkg of 2)
27 792035 1 Retaining Ring
28 788040 1 Retaining Ring
29 780072 4 Washer
30 780108 4 Washer
31 780001 2 Washer (.056 wide) (USE AS NEEDED)
32 788083 1 Oil Seal 5/8”
34 780194 2 Bushing
35 780193 2 Flanged Bushing
36 790075 1 Brake Disk
37 790007 1 Brake Pad Plate
38 799021 2 Brake Pad (pkg of 2)
39 786026 2 Dowel Pin
40 1 Washer
41 790019 1 Brake Lever
42 1 Screw 1/4-20 x 1-1/4”
43 792075 1 Locknut 5/16-24
44 790025 1 Brake Pad Holder
45 786066 1 Spacer
46 786086 1 Brake Lever Bracket
47 774942 1 Axle (12-7/32” long)
48 774869 1 Axle (16-13/16” long)
49 778356 1 Spur Gear (29 teeth-steel)
50 778354 1 Spur Gear (23 teeth-steel)
51 778352 1 Spur Gear (19 teeth-steel)
52 778350 1 Spur Gear (16 teeth-steel)
53 778346 1 Spur Gear (15 teeth-steel)
56 778355 1 Spur Gear (11 teeth-steel)

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

Peerless transmission parts must be ordered through your local Tecumseh/Peerless distributor.
© Copyright 1997 Tecumseh Products Company. All Rights Reserved.

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear

1693953 2515, 15HP Gear (Export)

12

TP-400-2588-02-RG-SMA

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

REFERENCE: Transmission Service Parts - Peerless Model MST 205-515A Transaxle

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

1722544

1

3

25A

25

85

72A

72

27

29

21

22

20

29

29

29

13

66

32

12

28

87

34

65

64

53

34

30

30

30

30

52

51

50

49

18

83

76

77

67

338

9

7

29A

10

71B

35

63

35

60

59

58

57

69

56

11

4

35A

29B

35A

29B

6A

70

5

6

157

73

75

157

73

75

58

31

13

31

13

6226

6226

14

17

15

661447

67

36

37

44

71

41

40

46

42

43

42A

45

82

180

150

31A

31A

48

2

39

38

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear

1693953 2515, 15HP Gear (Export)

13

TP-400-2588-02-RG-SMA

REFERENCE: Transmission Service Parts - Peerless Model MST 205-515A Transaxle

57 778353 1 Spur Gear (17 teeth-steel)
58 778351 1 Spur Gear (21 teeth-steel)
59 778349 1 Spur Gear (24 teeth-steel)
60 778345 1 Spur Gear (25 teeth)
63 786071 1 Countershaft Spacer 1-1/8” x 3/8”
64 786072 1 Brake Shaft Spacer 1-3/8” X 3/8”
65 780189 1 Washer
66 776394 1 Input Shaft
67 776396 1 Shifter & Brake Shaft
69 792170 1 Retaining Ring
70 786178 1 Spacer
72 792165 1 Threaded Plug 9/16-18
73 780140 2 Needle Bearing 3/4”
75 786084 2 Sleeve .999 ID
76 780090 1 Washer
77 1 Inverted Retaining Ring
82 778333 1 Bevel & Spur Gear (30 & 13 teeth)
83 778338 1 Spur Gear (27 teeth)
85 792154 1 Oil Fill Plug
87 788089 1 Oil Seal 9/16”

150 788093 1 Liquid Gasket RTV Silicone
157 788088 2 Oil Seal 3/4”
180 1 Gear Oil 80W90

792177 2 Screw 1/4-20 X 1-3/8”
780160 1 Washer
780165 2 Thrust Washer
780195 2 Flat Washer (.062 wide)
780197 2 Flanged Bushing 3/4”

1 Screw 1/4-20 x 2-1/4”
788092 1 “O” Ring
788091 1 “O” Ring

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

Peerless transmission parts must be ordered through your local Tecumseh/Peerless distributor.
© Copyright 1997 Tecumseh Products Company. All Rights Reserved.

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear

1693953 2515, 15HP Gear (Export)

14

TP-400-2588-02-RG-SMA

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

Transmission Group - Hydro

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985851

See Wheels & Tires in
Miscellaneous Group(s)

Note:
Orientation
of Key

4

5

6

7

8

4

15

9

14

2

43

1

43

33

35

40

44

46

36

34

16

17

42

20

19

2318

24

23

22

21

26

26

21

28

31

32

29

30

33

17

10

11

12

545

13

27

41

18

2318

37

39

38

25

The above parts group applies to the following Mfg. Nos.:

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

15

TP-400-2588-02-RG-SMA

Transmission Group - Hydro

1 1713843 1 KNOB
2 1723032 1 ROD
3 1918451 2 PIN, Cotter
4 1919326 2 WASHER
5 1960541 1 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4
6 1721007 1 STOP, Bel
7 1917372 1 NUT, Hex 5/16-18
8 1917356 1 LOCKWASHER, 5/16

9 1721130 1 V-BELT
10 1724316 1 SNAP RING
11 1724315 1 LOCKWASHER
12 1724312 1 CSPLINE COLLAR
13 1724313 1 PULLEY
14 1724314 1 FAN
15 1921333 1 CAPSCREW, 5/16-18 x 1
16 1718076 1 “E” RING
17 1931277 4 NUT, Hex Head Whiz Lock, 5/16-18
18 960202 4 WASHER
19 1717451 6 SPACER
20 1717749 2 KEY
21 1960586 4 SCREW, Hex Head Flange Lock, 5/16-18 x 2-1/2
22 1717427 1 ANCHOR, Torsion Bar LH
23 1960585 CAPSCREW, Hex Head Flange Whizlock, 5/16-18 x 1-3/4
24 1927557 NUT, Hex Flange Whizlock, 5/16-18
25 1721041 1 SPRING
26 960551 4 SCREW, Hex Washer Head Taptite, 5/16-18 x 2-1/2
27 1721021 1 TRANSMISSION ASSEMBLY
28 1717428 1 ANCHOR, Torsion Bar RH
29 1918448 2 PIN, Cotter
30 1720998 1 ROD
31 1717452 1 PULLEY & HUB ASSEMBLY
32 171241 1 KEY
33 1919438 2 NUT, Hex Lock, 5/16-18
34 1921977 1 CAPSCREW, 5/16-18 x 1-1/4
35 1960268 1 CARRIAGE BOLT, 3/8-16 x 1-1/4
36 1924356 1 WASHER
37 108717 1 SPACER
38 1960534 1 WASHER
39 1916950 1 NUT, Hex, 3/8-16
40 1916965 1 LOCKWASHER, 3/8
41 1918447 1 PIN, Cotter
42 1721005 1 ROD
43 1720681 1 LEVER & CLEVIS ASSEMBLY
44 1960223 1 CARRIAGE BOLT, 5/16-18 x 1-1/4
45 1924359 2 WASHER
46 1720997 1 LINK, Transmission

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

16

TP-400-2588-02-RG-SMA

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

T ransmission SERVICE P AR TS - T uff Tor q K-46AA T ransaxle

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

1721021

SMALL HOLE

SEAL SIDE; OUTER

PLATE OF SMALLER INNER DIA.

SHOULD CONTACT PISTONS.

THICKER PLATE

11

17

15

19

12

14

16

13

24

21

25

23

20

22

26

27

33

31

35

28

34

30

32

29

36

37

43

41

45

38

44

40

42

39

46

48

53

49

55

49

54

51

52

50

56

57

58

62

59

60

61

63

70

67

64

68

59

65

1

7

5

2

8

4

6

3

10

9

6

6

23

18

1

27

27

37

43

45

44

51

50

47

78

75

71

73

83

7466

72

21

20

17

55

54

56

83

81

80

79

82

84

77

85

77

76

74

69

The above parts group applies to the following Mfg. Nos.:

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

17

TP-400-2588-02-RG-SMA

T ransmission SERVICE P AR TS - T uff Tor q K-46AA T ransaxle

1 1724316 2 SNAP RING

2 1724312 2 SPLINE COLLAR

3 1724315 1 LOCKWASHER

4 1724313 1 PULLEY

5 1724314 1 FAN

6 1718076 3 RING

7 1724291 1 PUMP SHAFT

8 1724283 1 SEAL

9 1708650 1 RING, Snap
10 1708673 1 BEARING
11 1724282 1 SEALING CAP
12 1724279 2 MAGNET
13 1724280 1 HOLDER, Magnet
14 1718052 1 VENT VALVE
15 1724310 1 PIN
16 1724306 1 ARM, Brake
17 1724311 2 PIN, Spring
18 1708690 2 "O" RING
19 1724308 1 RETURN SPRING
20 1720814 2 BUSHING
21 1718111 2 SEAL
22 1724307 1 SHAFT, Brake
23 1724305 1 SHOE, Brake
24 1724309 1 ACTUATOR, Brake
25 1724285 1 CENTER CASE
26 1718070 1 PIN
27 1700805 3 BOLT
28 1718071 1 FILTER
29 1718084 1 WASHER
30 1724292 1 CYLINDER BLOCK
31 1718078 1 BEARING
32 1718077 1 HOUSING
33 1724293 1 SHAFT MOTOR
34 1708672 1 RING, SNAP
35 1718083 1 BEARING
36 1724294 1 MOTOR GEAR
37 1720439 2 WASHER
38 1724301 1 REDUCTION GEAR
39 1724299 1 COLLAR, Fina
40 1724302 1 FINAL PINION
41 1724300 1 REDUCTION SHAFT
42 1724303 1 AXLE SHAFT
43 1718110 2 BUSHING
44 1718112 2 THRUST WASHER
45 1718113 2 RING
46 1724297 2 DIFFERNIAL PINION
47 1724298 1 FINAL GEAR
48 1724304 1 AXLE SHAFT R
49 1707789 14 SCREW, Tapping
50 1724323 2 WASHER, Seal

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

18

TP-400-2588-02-RG-SMA

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

T ransmission SERVICE P AR TS - T uff Tor q K-46AA T ransaxle

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

1721021

SMALL HOLE

SEAL SIDE; OUTER

PLATE OF SMALLER INNER DIA.

SHOULD CONTACT PISTONS.

THICKER PLATE

11

17

15

19

12

14

16

13

24

21

25

23

20

22

26

27

33

31

35

28

34

30

32

29

36

37

43

41

45

38

44

40

42

39

46

48

53

49

55

49

54

51

52

50

56

57

58

62

59

60

61

63

70

67

64

68

59

65

1

7

5

2

8

4

6

3

10

9

6

6

23

18

1

27

27

37

43

45

44

51

50

47

78

75

71

73

83

7466

72

21

20

17

55

54

56

83

81

80

79

82

84

77

85

77

76

74

69

The above parts group applies to the following Mfg. Nos.:

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

19

TP-400-2588-02-RG-SMA

T ransmission SERVICE P AR TS - T uff Tor q K-46AA T ransaxle

51 1724324 2 SCREW, Cap
52 1724284 2 TAPPING SCREW
53 1724278 1 LOWER HOUSING
54 1724287 2 IDS SPRING
55 1724288 2 BALL
56 1724286 2 IDS VALVE
57 1724296 1 SPRING PIN
58 1724295 1 CONTROL ARM
59 1708684 2 SPRING
60 1724289 1 CYLINDER BLOCK
61 1724290 1 SPRING, Pump
62 1718088 1 THRUST PLATE
63 1718086 1 BEARING
64 1718087 1 THRUST PLATE
65 1720426 1 SWASH PLATE
66 1718089 2 THRUST METAL
67 1718061 1 RING
68 1720427 1 PLUG
69 1724318 1 OIL SEAL
70 1724317 1 UPPER HOUSING
71 1724281 1 SHAFT, Bypass
72 1708691 2 "O" RING
73 1707839 1 SPRING PIN
74 1720421 1 PIN
75 1720418 1 LEVER
76 1724319 1 CONTROL SHAFT
77 1720432 2 WASHER
78 1724320 2 FRICTION PLATE
79 1724321 1 CONTROL LEVER
80 1718100 1 PIN, Roll
81 1720422 1 STUD BOLT
82 1720429 1 COLLAR
83 1720430 1 SPRING, Friction
84 1720431 1 WASHER
85 1720437 1 LOCK NUT

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

20

TP-400-2588-02-RG-SMA

Controls Group

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985853

Part of Carrier -­See Frame Group.

See

Transmission

Group

Connect to
Lanced Notch
in Top of Frame

2

1

33

32

5

6

4

3

8

7

11

13

30

14

24

12

29

23

10

11

4

3

34

40

27

9

39

37

38

38

16

22

20

19

17

18

15

31

3435

36

41

2419

2842

43

28

24

24

25

21

26

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

21

TP-400-2588-02-RG-SMA

Controls Group

1 1704849 1 PAD, Brake Black Rubber

2 1717994 1 FOOT PEDAL & BRAKE ARM ASSEMBLY

3 1918447 2 PIN, Cotter, 3/32 X 3/4 (Gear)

3 1918451 2 PIN, Cotter, 1/8 X 3/4 (Hydro)

4 1919326 2 WASHER

5 1713432 1 ROD (Gear)

5 1717115 1 ROD (Hydro)

6 1717439 1 LEVER, Parking

7 1713855 1 KNOB

8 1714385 1 ROD

9 165068 1 SPRING, Extension
10 1921319 1 WASHER
11 1663114 2 BUSHING
12 1931355 1 CARRIAGE BOLT, 3/8-16 x 2-1/4
13 1717438 1 ARM, Idler
14 1721133 1 PULLEY, Idler
15 1717440 1 ROD
16 1717728 1 GUIDE BELT & STUD ASSEMBLY
17 1703900 1 SPACER
18 1935048 1 NUT, Hex Flange, 5/16-18
19 1919438 5 NUT, Hex Lock, 5/16-18
20 1919381 1 WASHER
21 1705249 1 SPACER
22 1708360 1 SPRING, Compression
23 1928352 1 NUT, Hex Head Whiz Lock, 3/8-16
24 1924940 3 WASHER
25 1721276 1 STOP, Belt
26 1667811 1 SPACER
27 1719590 1 SPRING, Extension
28 1921971 1 CAPSCREW, Hex Head, 3/8-16 x 1-3/4
29 1916965 1 LOCKWASHER, 3/8
30 1721134 1 PULLEY
31 1713785 1 GUIDE, Brake
32 1931333 3 CARRIAGE BOLT, 5/16-18 x 3/4
33 1713784 1 CLAMP
34 1713843 1 KNOB
35 1917372 2 NUT, 5/16-18
36 1921333 1 CAPSCREW, Hex Head, 5/16-18 x 1
37 1719534 1 ARM & HUB ASSEMBLY
38 916001 2 PIN, SPRING
39 1719422 1 HUB & BAR ASSEMBLY
40 1719532 1 SHAFT, Control
41 1707002 1 SPRING, Extension
42 1923362 2 NUT, Hex Center Lock, 5/16-18
43 1960555 1 CARRIAGE BOLT, 5/16-18 x 1-1/2

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

22

TP-400-2588-02-RG-SMA

Electrical Group

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985477AA

UNDER HOOD

To
Headlights

PTO

Switch

N.O.

(Black)

N.C.

(Gray)

To
Charging
Circuit

To
Fuel Shutoff
Magneto

To
Engine GND

From
Battery
Negative

NOTE:
Switch is located
on Transmission

UNDER FRAME

Pedal
Switches

UNDER SEAT DECK

Neutral Switch

(GEAR MODELS ONLY)

Neutral Switch
(HYDRO MODELS ONLY)

To
Starter

To
Engine GND

To
Starter

From
Solenoid

A

A

B

B

11

10

9

8

13

14

3

7

4

5

6

1

2

34

16

17

15

23

25

23

22

19

21

18

20

19

26

27

31

30

28

29

35

36

37

38

269

46

45

43

42

41

33

39

40

33

18

18

24

23

32

12

44

2

22

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

23

TP-400-2588-02-RG-SMA

Electrical Group

1 1719837 1 WIRE ASSEMBLY (Hydro Models Only)

2 1661345 1 TUBE, Shrink

3 1723709 1 PLATE, Neutral Switch (Hydro Models Only)

4 1676123 1 SWITCH, Neutral Safety (Hydro Models Only)

5 1930947 2 LOCKWASHER, Spring, 1/8 (Hydro Models Only)

6 960659 2 NUT, Hex Machine, #4-40 (Hydro Models Only)

7 960658 2 CAPSCREW, Round Head, Phillips, #4 - 40 x 3/4

8 1960547 1 LOCKWASHER, Internal Tooth, 5/8

9 101025 3 WASHER, 5/8
10 1717549 1 NUT, Hex, Flange, 5/8-32
11 1717550 1 COVER, Ignition
12 1716061 1 SWITCH, Ignition, 6-Pole (Includes Ref. 21, 23, 24, 25 & 26)
13 1717163 1 IGNITION KEY (Set of 2)
14 1718981 1 SWITCH, Seat
15 1665237 1 WIRE ASSEMBLY
16 1665238 1 CIRCUIT BREAKER
17 1927429 2 CAPSCREW, Taptite Hex Washer Head, 1/4-20 x 5/8
18 1703484 1 CABLE, # 6 x 42-1/2 long (Solenoid to Starter)
19 1700751 1 SOLENOID
20 1916622 2 NUT, Hex, 1/4-20
21 1916964 2 LOCKWASHER, 1/4
22 920426 2 LOCKWASHER, External Tooth, 5/16
23 1716549 1 CABLE, # 6 x 10 Long, with 2 Ring Terminals
24 1677296 1 BOOT, Insulator
25 1920263 2 NUT, Hex, 5/16-24 NF
26 1921319 2 WASHER, Plain, 1/4
27 1923341 2 CAPSCREW, Hex Head, 1/4-20 x 3/4
28 1919326 1 WASHER, Plain, 5/16
29 1919438 1 NUT, Hex Nylon Lock, 5/16-18
30 1723048 1 ROD, Battery Hold Down
31 1921332 1 CAPSCREW, Hex Head, 5/16-18 x 3/4
32 1722841 1 BATTERY
33 1703484 1 CABLE, # 6 x 52-1/2 long (Battery to Ground)
34 925094 1 TIE-SELF LOCKING (Qty 2 on Gear Models)
35 1720510 1 HARNESS, Wiring
36 1715011 1 WIRE ASSEMBLY, Transmission (Gear Models Only)
37 1654634 1 SWITCH, Transmission
38 1715540 1 SEAL, O-Ring
39 1720411 1 SWITCH, Pedal, N.O., Black
40 1720401 1 SWITCH, Pedal, N.C., Gray
41 1960294 1 NUT, Hex Flange, Whiz Lock, 1/4-20
42 122023 1 COVER, Terminal
43 172434 1 CLIP, Tinnerman
44 934683 2 CLIP, Wire
45 1717050 1 SWITCH, Neutral Start
46 1722035 2 POP-RIVET

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

24

TP-400-2588-02-RG-SMA

Hood, Dash & Fuel Tank Group

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

986034

Panel, Right Side

Panel, Left Side

1

2

3

4

5

6

7

14

15

17

19

22

23

24

25

26

27

32

29

30

28

16

18

32

31

31

26

26

20

10

9

8

11

1212

13

10

33

10

16

18

21

21

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

25

TP-400-2588-02-RG-SMA

Hood, Dash & Fuel Tank Group

1 1674231 1 ELBOW

2 1654930 1 BUSHING

3 1714472 1 TANK

4 1714020 1 CAP, Fuel Tank

5 1715044 1 STRAP

6 1704351 1 FASTENER, Panel

7 1919438 2 NUT, Hex Lock, 5/16-18

8 1921319 A/R WASHER, 1/4 (2 used for Hood, A/R for Bulkhead)

9 1721167 1 BULKHEAD & TUBE ASSEMBLY
10 1960368 6 NUT, Speed
11 1722737 4 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2
12 1925003 4 SCREW, Hex Washer Head Taptite, 1/4-20 x 1/2
13 176440 1 BUSHING
14 1661348 2 MOLDING
15 1719486 1 DASHBOARD
16 1710703 4 SPACER
17 172434 2 CLIP, Wire
18 1922837 4 CAPSCREW, Hex Head, 1/4 - 20 x 1-1/2
19 1714350 1 PANEL, Hood, LH
20 1714351 1 PANEL, Hood, RH
21 1719451 1 HEAD LIGHT ASSEMBLY (Includes Ref. Nos. 22, 23, 24 & 25)
22 1714787 2 SOCKET, Light
23 1714786 1 BEZEL, Housing
24 1677371 2 BULB, #1156
25 1714785 1 LENS, Headlight
26 1920397 6 NUT, Hex Lock, 1/4-20
27 1714352 1 GRILLE
28 1714875 2 HINGE
29 1704626 2 SPACER
30 1704628 2 PIN, Quick
31 1960295 4 CAPSCREW, Hex Head Flange Lock, 1/4-20 x 5/8
32 1719483 1 HOOD-REGENT w/LOUVERS (ORANGE)
33 1723127 1 DUCT, Cooling

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

A/R as required.

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

26

TP-400-2588-02-RG-SMA

Seat & Seat Deck Group

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985926

1

8

9

11

10

7

9

18

86

4

4

12

82

84

85

87

819

83

820

17

13

1215

16

14

82

82

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

27

TP-400-2588-02-RG-SMA

Seat & Seat Deck Group

1 1713839 1 SEAT

2 1919381 4 WASHER

3 1718981 1 SWITCH, Seat

4 1716654 4 CARRIAGE BOLT, 5/16-18 x 3/4

5 1960486 2 SCREW, Flat Head, 5/16-18 x 1-1/4

6 1708360 2 SPRING, Compression

7 1931277 6 NUT, Hex Head Whiz Lock, 5/16-18

8 1713758 2 BAR

9 1930591 6 CAPSCREW, Hex Head, 5/16-18 x 3/4
10 1714317 1 DECK, Seat
11 1935255 2 NUT, Speed 5/16-18
12 1714908 1 POD, Seat for Gear
13 1714909 1 PLUG (Gear)
14 1960518 3 PUSH NUT(Hydro)
15 1709188 2 PLUGS (Hydro)
16 1723019 1 INSERT, Speed (Hydro)
17 1723105 1 POD, Seat for Hydro
18 1670578 1 KNOB
19 1722618 1 SUPPORT & PIN ASSEMBLY
20 1722655 1 CLAMP & SCREW ASSEMBLY

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

28

TP-400-2588-02-RG-SMA

Wheels & Tires Group

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

W985960

REAR WHEELS & TIRES

FRONT WHEELS & TIRES

As Required

See
Transmission
Group

1

2

3

4

55

10

11

12

12

55

13

14

6

7

8

107

6

8

9

9

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

29

TP-400-2588-02-RG-SMA

Wheels & Tires Group

1 1717749 2 KEY, 3/16 x 2

2 1719450 2 WHEEL & TIRE ASSEMBLY

3 1720370 2 TIRE, 18 X 8.5 Turf Saver II

4 1716132 2 WHEEL, 7 X 8

5 172353 4 VALVE STEM & CAP ASSEMBLY

6 960202 4 WASHER

7 1960160 4 WASHER

8 927794 4 "E" - RING

9 1722675 4 CAP, Hub
10 1719449 2 WHEEL & TIRE ASSEMBLY (Includes Ref. Nos. 5, 11, 12, 13, & 14) (Export)
10 1716129 2 WHEEL & TIRE ASSEMBLY (Includes Ref. Nos. 5, 11, 12, 13, & 14)
11 1715032 2 WHEEL & BUSHINGS ASSEMBLY (Includes Ref. No. 12)
12 1713167 2 BEARING
13 1720337 2 TIRE, 15 X 6.Turf Saver II Carlisle
13 1716130 2 TIRE, 15 X 6.50 - Super Trac II (Export)
14 1664090 2 TUBE, Tire

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

30

TP-400-2588-02-RG-SMA

Decal Group - Safety & Common

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

C985859

STOP ENGINE.

MOTOR STOPPEN.
MOTOR ANHALTEN.
STOP MOTOR.
ARRETER LE MOTEUR.
FERMARE MOTORE.

PUSH

DUWEN
SCHIEBEN
SKUB
POUSSER
SPINGERE

DRIVE

RIJDEN
FAHREN
KØR
CONDUIRE
GUIDARE

DO NOT TOW!

NIET SLEPEN!
NICHT SCHLEPPEN!
IKKE BUGSERE!
NE PAS REMORQUER!
NON TRAINARE!

1719635

1723731

DANGER

OPERATING ON SLOPES
CAN BE DANGEROUS

SEE OPERATOR'S MANUAL. IF YOU
CANNOT BACK-UP A HILL, DO NOT
DRIVE ON IT.

ROTATING BLADES CUT
OFF ARMS AND LEGS

STOP MOWER WHEN CHILDREN
ARE NEAR.
NO RIDERS — THEY FALL OFF.

DANGER

AVOID SERIOUS INJURY OR DEATH

• READ OPERATOR'S MANUAL(S).

• KNOW LOCATION AND FUNCTION OF ALL CONTROLS.

• KEEP SAFETY DEVICES (GUARDS, SHIELDS, SWITCHES, ETC.)
IN PLACE AND WORKING.

• REMOVE OBJECTS THAT COULD BE THROWN BY THE BLADE.

• DO NOT MOW WHEN CHILDREN OR OTHERS ARE AROUND.

• NEVER CARRY CHILDREN EVEN WITH BLADES OFF.

• LOOK DOWN AND BEHIND BEFORE AND WHILE BACKING.

• AVOID SUDDEN TURNS.

• IF YOU CANNOT BACK UP A HILL, DO NOT OPERATE ON IT.

• GO UP AND DOWN SLOPES, NOT ACROSS.

• IF MACHINE STOPS GOING UPHILL, STOP BLADE AND
BACK DOWN SLOWLY.

• BE SURE BLADE(S) AND ENGINE ARE STOPPED BEFORE
PLACING HANDS OR FEET NEAR BLADE(S).

• WHEN LEAVING MACHINE, SHUT OFF ENGINE, REMOVE KEY,
AND SET PARKING BRAKE.

WARNING

1722814-02

DO NOT TOW TRACTOR! DAMAGE MAY RESULT TO TRANSMISSION.

1

2

6

8

12

10

1

2, 3

6

8

12

10

9

11

7

4

13

5

5

3

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

1693920 38” Mower Deck
1693930 38” Mower Deck (Export)
1693959 38” Mower Deck
1693963 38” Mower Deck (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

31

TP-400-2588-02-RG-SMA

Decal Group - Safety & Common

1 1722554 1 DECAL, Belts & Mower Blades

2 1723731 1 DECAL, Operating Instructions

3 1722814 1 DECAL, Safety Instructions

3 1723175 1 DECAL, Safety Instructions (Export)

4 1713054 1 DECAL, Patent

5 1 DECAL, CE & Serial Number Export (Not Serviced)

5 1 DECAL, OPEI (Not Serviced)

5 1 DECAL, Serial Number (Not Serviced)

6 1708927 1 DECAL, USA Logo

7 1719776 1 DECAL, PTO Control Symbols

8 1719635 1 DECAL, Transmission Release Valve, Hydros only

9 1722787 1 DECAL-38"
10 1704277 1 DECAL, DANGER
11 1717736 1 DECAL, Height Of Cut
11 1720919 1 DECAL, Height of Cut
12 1704276 1 DECAL, DANGER
13 1722771 1 DECAL, Free Floating Mower
14 1723069 1 DECAL, Engine 15HP B&S INTEK Not Shown

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

* Not serviced.

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

1693920 38” Mower Deck
1693930 38” Mower Deck (Export)
1693959 38” Mower Deck
1693963 38” Mower Deck (Export)

32

TP-400-2588-02-RG-SMA

Decal Group - Brand & Model

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

B985859

4

6

7

5

5

9, 10

8

13, 14

12

15

8

12

4

1

1

2, 3

6

6

16

11

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

33

TP-400-2588-02-RG-SMA

Decal Group - Brand & Model

1 1717692 2 DECAL, Simplicity Icon

2 1719516 1 DECAL, Simplicity Stripe RH

3 1719517 1 DECAL, Simplicity Stripe LH

4 1722551 3 DECAL, Simplicity

5 1720454 1 DECAL, Touch Up Paint

6 1722772 1 DECAL, Silver & Blue

7 1722548 1 DECAL, 15HP

8 1708926 2 DECAL, AGCO Logo

9 1722558 1 DECAL, AGCO, Hood RH Stripe
10 1722557 1 DECAL, AGCO, Hood LH Stripe
11 1722720 2 DECAL, 515
12 1714363 2 DECAL, Massey Ferguson
13 1722728 1 DECAL, Massey Ferguson Hood RH
14 1722727 1 DECAL, Massey Ferguson Hood LH
15 1720456 1 DECAL, Touch Up Paint, Massey Ferguson
16 1722729 2 DECAL, 2515

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693911 Regent, 15HP Gear
1693921 Regent, 15HP Gear (Export)
1693931 515G, 15HP Gear
1693940 515, 15HP Gear (Export)
1693944 2515G, 15HP Gear
1693953 2515, 15HP Gear (Export)

1693913 Regent, 15HP Hydro
1693923 Regent, 15HP Hydro (Export)
1693933 515H, 15HP Hydro
1693942 515, 15HP Hydro (Export)
1693946 2515H, 15HP Hydro
1693955 2515, 15HP Hydro (Export)

34

TP-400-2588-02-RG-SMA

38”Mower Deck - Housing, Arbors & Blades

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985486AA

Torque to 50-70 Ft. Lbs.

Torque to 50-70 Ft. Lbs.

Torque capscrews to
45-55 Ft. Lbs. or
61-75 N. M.

Export Only

Export Only

Export Only

21

12

12

11

10

14

2714

16

17

19

9

8

23

2

13

26

10

14

15

13

27

28

10

16

17

6

18

618

19

20

21

22

20

22

32

35

35

40

37

38

39

36

37

37

34

3833

31

25, 45

38

39

1

2

4

6

8

9

7

5

13

13

25

24

41

42

43

30

44

29

29

3

4

3

The above parts group applies to the following Mfg. Nos.:

1693920 38” Mower Deck
1693959 38” Mower Deck

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

35

TP-400-2588-02-RG-SMA

38”Mower Deck - Housing, Arbors & Blades

1 1705449 1 DEFLECTOR, Plastic

2 1960518 2 NUT, Push On

3 1705249 2 SPACER (Export Models Only)

4 1960353 3 WASHER, 1/4 (Export Models Only, Qty 1)

5 1704873 1 CLAMP

6 1919326 1 WASHER, Plain, 5/16

7 1705080 1 SPRING

8 1916964 2 LOCKWASHER, 1/4

9 1916622 2 NUT, Hex, 1/4-20
10 1713616 2 HUB
11 1720388 1 PULLEY, Deck Drive, RH 5-1/4
12 1714322 2 STOP, Belt, R.H.
13 1927557 2 NUT, Hex, Flange Whiz Lock, 5/16-18
14 1713675 4 WASHER, Belleville
15 1714419 2 NUT, Hex, Flange, 9/16-8
16 1713199 2 COVER, Arbor Housing
17 1713204 2 SPACER
18 1705897 4 BEARING
19 1707335 2 GASKET, Foam
20 1713198 2 HOUSING ARBOR, Bottom
21 1704314 2 FITTING, Grease
22 1713338 2 ARBOR HOUSING ASSEMBLY (Includes Ref. Nos. 20 & 21)
23 1706709 1 ROD, Deflector, Front
24 1705115 2 PLUG, Plastic
25 1960633 2 CARRIAGE BOLT, 1/4-20 x 7/8
26 1720387 1 PULLEY, Deck Drive, LH, OD 4"
27 1714321 1 STOP, Belt, LH
28 1924940 2 WASHER, Plain, 3/8
29 1664847 3 CAPSCREW, Taptite Hex Washer Hd, 5/16-18 x 3/4 (Export)
30 1721143 1 COVER & SUPPORT ASSEMBLY, Arbor (Export Models Only)
31 41721160 1 HOUSING ASSEMBLY, 38" Mower (Cardinal Red)
32 1960373 12 CAPSCREW, Taptite Hex Washer Head 5/16-18 x 1
33 1713619 2 WASHER
34 1713612 2 SHAFT, Arbor
35 1713196 2 SHIELD, Grass, Lower
36 1704856 1 BLADE, Mower, 16-1/8"
37 1713089 2 WASHER, Hex
38 1656916 2 WASHER, Spring
39 923471 2 CAPSCREW, Hex, Head, 7/16-14 x -1/4
40 1704101 1 BLADE, Mower, 22-1/4"
41 1931333 4 CARRIAGE BOLT, 5/16 - 18 x 3/4 (Export)
42 1715817 1 BAFFLE, Anti-Blowout (Export Models Only)
43 1935048 4 NUT, Hex Flange Lock, 5/16-18 (Export)
44 1721142 1 COVER & SUPPORT ASSEMBLY, Arbor RH (Export Models Only)
45 1960633 2 CARRIAGE BOLT, 1/4-20 x 1 1/2 (Export)

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693920 38” Mower Deck
1693959 38” Mower Deck

36

TP-400-2588-02-RG-SMA

38”Mower Deck - Height Adjustment & Roller Bar

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985582

Insert Must
Face Out

44

38
40

1

3

4

5

6

7

4

9

10

11

12

16

17

19

20

18

21

8

22

23

25

26

28

27

29

30

29

4

4

3

33

34

20

38

39

43

4338

40

41

24

31

25

35

35

37

35

34

33

32

36

15

2

14

13

The above parts group applies to the following Mfg. Nos.:

1693920 38” Mower Deck
1693959 38” Mower Deck

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

37

TP-400-2588-02-RG-SMA

38”Mower Deck - Height Adjustment & Roller Bar

1 1960541 7 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4

2 1714910 1 BRACKET, Upstop

3 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4

4 1960044 8 WASHER, 5/16

5 1960074 1 CLIP, Spring

6 1714529 1 ROD, Transport

7 1710703 2 SPACER

8 1664847 2 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4

9 1923362 4 NUT, Hex Lock, 5/16-18
10 1720372 1 U-BRACKET
11 1960655 1 CARRIAGE BOLT, 5/16-18 x 1-1/4
12 1717297 1 ARM, Rear
13 1714876 1 GRIP
14 910542 2 RIVET
15 1716028 1 SPRING, Handle
16 1717658 1 ADJUSTMENT ARM
17 1931353 1 CARRIAGE BOLT, 3/8-16 x 1-3/4
18 1714327 1 ROCKER ARM ASSEMBLY
19 1714263 1 SPRING
20 1930645 2 NUT, Hex Flange Lock, 3/8-16
21 1665374 1 STRAP
22 1714879 1 ECCENTRIC
23 1924874 1 WASHER, Flat, 5/16
24 1931352 1 CARRIAGE BOLT, 3/8-16 x 1-1/2
25 960643 3 NUT, Hex, Flangelock, 5/16-18
26 960641 1 NUT, Hex Lock ALUM Insert, 3/8-16
27 1960594 1 CAPSCREW, Hex Head Tapite, 5/16-18 x 7/8
28 1704082 1 NUT, Adjuster
29 1960236 4 SPACER
30 1719846 1 BAR, Roller, Support
31 1721081 1 ARM, Pitch
32 1960373 7 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1
33 1960520 2 PUSHNUT, 5/8
34 1717675 2 ROLLER, End
35 1924366 3 WASHER, 5/8
36 1668513 8 ROLLER
37 1719905 1 SHAFT ASSEMBLY
38 1924940 4 WASHER, Flat, 3/8
39 1611705 1 SPACER
40 1715024 1 SPACER
41 1923701 1 CAPSCREW, Hex Head, 3/8-16 x 2

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693920 38” Mower Deck
1693959 38” Mower Deck

38

TP-400-2588-02-RG-SMA

38”Mower Deck - Belt, Idler Arm & Hitch

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

985487

Hook Spring (Ref 8)
here when assembled.

Outside
Hole

Inside
Hole

Note: Cotter pin should
be in inner most hole
when assembling new.
As belt wears, move to
outer most hole to
decrease blade stopping
time.

Note: Item Ref. No. 9 must
be assembled from inside
of tractor as shown

Insert Must
Face Out

6

1

2

25

4

5

6

7

18

24

22

21

8

9

10

12

11

13

14

2

15

16

17

26

27

4

6

5

25

62

25

30

31

2

32

33

35

34

29

37

36

23

2520

143

18

143

19

28

28

2

The above parts group applies to the following Mfg. Nos.:

1693920 38” Mower Deck
1693930 38” Mower Deck (Export)
1693959 38” Mower Deck
1693963 38” Mower Deck (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

39

TP-400-2588-02-RG-SMA

38”Mower Deck - Belt, Idler Arm & Hitch

1 1716854 1 V-BELT

2 1924940 7 WASHER, 3/8

3 1927557 4 NUT, Hex Head Flange Lock, 5/16

4 1719419 2 ACTUATOR & PAD ASSEMBLY

5 1960607 2 PIN

6 1719526 2 SPRING, Torsion

7 1719434 1 ROD

8 1918451 1 PIN, Cotter

9 1960074 1 CLIP
10 1720450 1 ROD
11 1719777 1 COLLAR, Set
12 1928721 1 SCREW, Set, Cup Point, 5/16-18 x 1/2, G8
13 1720462 1 SPRING, Compression
14 1921972 1 CAPSCREW, Hex Head, 3/8-16 x 2-1/2
15 1719539 1 GUIDE
16 108717 1 SPACER
17 1677135 1 GUARD, Spring
18 1960339 2 NUT, Hex Head Flange Lock, 3/8-16
19 1924356 2 WASHER, 3/8
20 1922755 2 WASHER, 3/8
21 1665460 1 PULLEY ASSEMBLY
22 1666294 1 SPACER
23 1667812 1 SPACER
24 1720594 1 ARM
25 1719427 2 SUPPORT, Brake
26 1714255 1 SPACER
27 1719433 1 ROD
28 1918447 2 PIN, Cotter
29 1921969 2 CAPSCREW, Hex Head, 3/8-16 x 1-1/2
30 1922605 1 CAPSCREW, Hex Head, 3/8-16 x 1-1/4, G8
31 960641 2 NUT, Hex Lock, ALUM Insert, 3/8-16
32 157081 2 SPACER
33 1713578 1 ROD
34 1715759 1 ROD
35 1713561 1 HITCH, Mower
36 1960519 1 NUT, Push, 1/2
37 156302 1 SPRING, Extension

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693920 38” Mower Deck
1693930 38” Mower Deck (Export)
1693959 38” Mower Deck
1693963 38” Mower Deck (Export)

40

TP-400-2588-02-RG-SMA

38”Mower Deck - Housing, Arbors & Blades

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

986069

Viewed From Bottom

Torque to
50-70 ft/lbs

Export
Only

Note: 2 for Export
1 for Domestic

Torque to 55-60 ft. lbs.

10

2

2

8

11

1

22

3

4

5

6

7

7

8

9

10

12

13

15

16

1717

18

18

1919

22

23

24

22

23

24

25

26

2727,14

28

29

30

30

32

33

31

34

35

11

9

7

7

6

36

35

34

5

37

38

15

13

1

20

21

29

3939

39

39

25

25

25

16

25

25

39

39

2525

40

43

42

42

41

30

30

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

41

TP-400-2588-02-RG-SMA

38”Mower Deck - Housing, Arbors & Blades

1 1714419 2 NUT, Hex, Flange, 9/16-8

2 1713675 4 WASHER, Belleville

3 1720387 1 PULLEY, LH, 4" OD

4 1917372 1 NUT, Hex, 5/16-18

5 1713616 2 HUB

6 1713199 2 COVER, Arbor Housing

7 1705897 4 BEARING

8 1713204 2 SPACER

9 1707335 2 GASKET, Foam
10 1713338 2 ARBOR HOUSING ASSEMBLY (Includes Ref. No. 11)
11 1704314 2 FITTING, Grease
12 1714321 1 STOP, Belt, LH
13 1927557 4 NUT, Hex, Whiz Lock, 5/16-18
14 1931320 2 CARRIAGE BOLT, 1/4-20 x 1-1/4 (Export Models)
15 1924940 4 WASHER, Flat, 3/8
16 1930600 1 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1-1/2
17 1713619 2 WASHER
18 1713612 2 SHAFT, Arbor
19 1713196 2 SHIELD, Grass, Lower
20 1704856 1 BLADE, Mower, 16-1/8
21 1704101 1 BLADE, Mower, 22-1/4
22 1713089 2 WASHER, Hex
23 1656916 2 WASHER, Spring
24 923471 2 CAPSCREW, Hex Head, 7/16-14 x -1/4
25 1664847 7 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4
26 1686826 1 MOWER DECK HOUSING, 38", Orange
26 41686826 1 MOWER DECK HOUSING, 38", Red
26 61686826 1 MOWER DECK HOUSING, 38", Black
27 1931318 2 CARRIAGE BOLT, 1/4-20 x 7/8
27 1931320 2 CARRIAGE BOLT, 1/4-20 x 1-1/4 (Export Models)
28 1705449 1 DEFLECTOR, Plastic
29 1960518 2 NUT, Push On
30 1960353 6 WASHER, Plain, 1/4 (6 Total for Export)
31 1704873 1 CLAMP
32 1919326 1 WASHER, Plain, 5/16
33 1705080 1 SPRING
34 1916964 2 LOCKWASHER, 1/4
35 1916622 2 NUT, Hex, 1/4-20
36 1706709 1 ROD, Deflector, Front
37 1720388 1 PULLEY, RH, 5-1/4 OD
38 1714322 1 STOP, Belt, RH
39 1960373 4 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1
40 1705115 2 PLUG, Plastic
41 1721143 1 COVER ASSEMBLY LH, Arbor (Export Models)
42 1664847 3 CAPSCREW, Hex Head, Taptite, 5/16-18 x 3/4 (Export Models)
43 1721142 1 COVER ASSEMBLY R H, Arbor (Export Models)

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)

42

TP-400-2588-02-RG-SMA

38”Mower Deck - Height Adjustment & Roller Bar

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

986068AA

Note: Apply Locktite

380 in Hole prior to

assembling on rod

Insert Must
Face Out

44

38

40

54

53

1

2

3

4

5

6

7

4

9

10

11

12

13

16

17

20

18

21

24

22

23

25

26

55

28

27

29

30

29

4

4

31

38

39

40

8

41

33

34

20

43

44

43

4343

45

46

47

42

25

35

35

37

34

33

32

36

14

15

56

19

48

49

50

52

51

50

35

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

43

TP-400-2588-02-RG-SMA

38”Mower Deck - Height Adjustment & Roller Bar

1 1664847 2 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 3/4

2 1714910 1 BRACKET, Upstop

3 1921977 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/4

4 1960044 8 WASHER, 5/16

5 1960074 1 CLIP, Spring

6 1714529 1 ROD, Transport

7 1710703 2 SPACER

8 1960027 2 WASHER, 1/2

9 1923362 2 NUT, Hex Lock, 5/16-18
10 1720372 1 U-BRACKET
11 1960655 1 CARRIAGE BOLT, 5/16-18 x 1-1/4
12 1717297 1 ARM, Rear
13 1924856 2 CAPSCREW, Hex Head, Taptite, 5/16-18 x 1/2
14 1721635 1 BRACKET, Decal
15 1720919 1 DECAL, Height
16 1721634 1 ROD LATCH
17 1931350 1 CARRIAGE BOLT, 3/8-16 x 1
18 1714327 1 ROCKER ARM ASSEMBLY
19 1920397 1 NUT, Hex Lock, 1/4-20
20 1919439 2 NUT, Hex, Lock ESNA, 3/8-16
21 1665374 1 STRAP
22 1714879 1 ECCENTRIC
23 1924874 1 WASHER, Flat, 5/16
24 1690541 2 CAPSCREW, Taptite Hex Washer Head, 5/61-18 x 7/8
25 960643 3 NUT, Hex, Flange Collar Lock, 5/16-18
26 960641 2 NUT, Hex Lock, Alum Insert 3/8-16
27 1960594 1 CAPSCREW, Hex Head Taptite, 5/16 x 7/8
28 1704082 1 NUT, Adjuster
29 1960236 4 SPACER
30 1719846 1 BAR, Roller, Support
31 1921333 2 CAPSCREW, Hex Head, 5/16-18 x 1
32 1960373 2 CAPSCREW, Taptite Hex Washer Head, 5/16-18 x 1
33 1960520 2 PUSHNUT, 5/8"
34 1717675 2 ROLLER, End
35 1924366 3 WASHER, 5/8
36 1668513 8 ROLLER
37 1719905 1 SHAFT ASSEMBLY
38 1960288 2 PIN
39 1960221 2 CLIP, Hair
40 1714760 2 GAUGE WHEEL
41 158399 2 E-RING, 1/2
42 1714878 2 ARM ASSEMBLY, Adjustable
43 1924940 4 WASHER, Flat, 3/8
44 1611705 1 SPACER
45 1715024 1 SPACER
46 1923701 1 CAPSCREW, Hex Head, 3/8-16 x 2
47 1721081 1 ARM, Pitch
48 1720599 1 LATCH
49 1921159 1 CAPSCREW, Hex, 1/4-20 x 2-1/4
50 1918265 2 WASHER

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)

44

TP-400-2588-02-RG-SMA

38”Mower Deck - Height Adjustment & Roller Bar

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

986068AA

Note: Apply Locktite

380 in Hole prior to

assembling on rod

Insert Must
Face Out

44

38

40

54

53

1

2

3

4

5

6

7

4

9

10

11

12

13

16

17

20

18

21

24

22

23

25

26

55

28

27

29

30

29

4

4

31

38

39

40

8

41

33

34

20

43

44

43

4343

45

46

47

42

25

35

35

37

34

33

32

36

14

15

56

19

48

49

50

52

51

50

35

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

45

TP-400-2588-02-RG-SMA

38”Mower Deck - Height Adjustment & Roller Bar

51 1676526 1 SPRING, Compression
52 1960518 1 PUSHNUT, 1/4
53 1713995 1 GRIP
54 1723124 1 BUTTON
55 1721620 1 HANDLE ASSEMBLY
56 1931352 1 CARRIAGE BOLT, 3/8-16 x 1-1/2

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)

46

TP-400-2588-02-RG-SMA

38”Anti-Blowout Baffles

NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.

1686689

1

2

3

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)
1686689 38” Anti-Blowout Baffle Kit

© Copyright 2002 Simplicity Manufacturing, Inc. All Rights Reserved.

47

TP-400-2588-02-RG-SMA

38”Anti-Blowout Baffles

1 1686689 1 Anti-Blowout Baffle Kit, (Includes Ref. Nos. 2 & 3)

2 1931333 4 CARRIAGE BOLT, 5/16-18 x 3/4

3 1935048 4 NUT, Hex Flange Lock, 5/16-18

REF NO. PART NO. QTY. DESCRIPTION

Footnotes:

The above parts group applies to the following Mfg. Nos.:

1693930 38” Mower Deck (Export)
1693963 38” Mower Deck (Export)
1686689 38” Anti-Blowout Baffle Kit

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware
Grade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Of

in/lbs in/lbs

in/lbs

Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32

19

2.1

30

3.4

41

4.6

8-36

20

2.3

31

3.5

43

4.9

10-24

27

3.1

43

4.9

60

6.8

10-32

31

3.5

49

5.5

68

7.7

1/4-20

66

7.6 8 10.9 12 16.3

1/4-28

76

8.6 10 13.6 14 19.0
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES

1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

torques.

b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.

3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.

Hardware Identification & Torque Specifications

Common Hardware Types

Screw, 1/2 x 2

Body

Diameter

Body

Length

Inside
Diameter

Nut, 1/2”

No

Marks

3/8” Bolt or Nut

Wrench—9/16”

3/8

5/16” Bolt or Nut

Wrench—1/2”

5/16

1/4” Bolt or Nut

Wrench—7/16”

1/4

1/2” Bolt or Nut

Wrench—3/4”

1/2

DIA.

7/16
DIA.

7/16” Bolt or Nut

Wrench (Bolt)—5/8”

Wrench (Nut)—11/16”

Wrench & Fastener Size Guide

Standard Hardware Sizing

When a washer or nut is identified as 1/2”, this is the

Nominal size

, meaning the

inside diameter

is 1/2 inch; if a

second number is present it represent the

threads per inch

When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the

Nominal size

, or

body diameter

is 1/2 inch; the

second number represents the

threads per inch

(16 in this

example, and the final number is the

body length

of the

bolt or screw (in this example 2 inches long).

The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.

0

1/4 3/4

1/2

1

1/4 3/4

1/2

2

1/4 3/4

1/2

3

1/4 3/4

1/2

4