Simplicity 2300 User Manual
Specifications and Main Features
- Engine:
- Make: Vanguard V&Twin
- Make Company: Brigg and Statton
- Torque: 16 HP @ 3600 Rpm
- Params: 2
- Displacement: 29.3º cu for 29 x 3 Cu in
- Lube System Type: Full Pressure W/Oil Filter
- Oil Capacity: 3.5 w/filter
- Fuel Totals: 4 gallons
- Transmission:
- Grade: #40 Chain
- Type: Hydrostatic, Infinitely Variable
- Speeds: Forward 0 – 5.5 MPH, Reverse 0 – 2.6 MPH
- Chassis:
- Rear Wheel: 13 x 5.0 -6 18-22 psi
- Front Wheel: 16 x 6.5- 8 8-12 psi
- Frame Material: ¼ steel Rails 12gauge
- Turning Radius: 6 for 15.2 cm
- Dimensions:
- Model Length: 87.5
1940 for 15.2 cm x 63. x 20.7 inches for 1613 cm
- Self Width: 57.5inches146.1cms(beingwith)
- Model Height: 40.5 for 1021 so cm x 40.5 x Next Difference
- Weight:
- Mower Weight 42 Deck: 671 kgs
- Mower Weight 48 Deck: 664 grams
- Approx for 286.79 Kgs
- Mower cutting features:
- Cutting Width: 42 for 42 std
(107 cm)
- Cutting Capacity (48’’ Deck): 48 inches (122 cm)
- Raised Cutting Height: 1 Inch to 4 Inches (3.2-10.2 cm)
- Blade Location: Three Interlaced Blades
- Mower Propulsion Type: V-Belt through the PTO Pulley of a tractor
- Spindle Bearings: Sealed Ball Bearings
Frequently Asked Questions
A1: We do not recommend any alteration in oils and just recommend gasoline.
Q1: What engine fuel is needed?
Q2: What’s the required frequency for oil check?
A2: Engine oil is important for efficient machine performance, and we recommend checking it every use.
Q3: What tire pressure do you recommend?
A: The suitable tire pressure for front tires is around 8-12 psi and for rear tires, 18-22 psi.
Q4: Do I need tools to adjust mower cutting height?
A24: The cutting height hinges on a range of 1- 1/4” to 4” and can be altered through the mower lever.
Q5: What should I do if the engine does not start?
A5: Check if the fuel tank has any gas in it, the PTO switch is not on and make sure the ground speed control lever is in the mid or ‘neutral’ position.
Q6: I want to clean the mower blades, what is the best approach?
A6: Disconnect the mower from the tractor and begin sharpening the blades while making sure that all dirt and grease is cleared out.
Q7: I was wondering whether it is appropriate to operate on steep slopes?
A7: Never operate on 30 degree steep slopes and always ensure to mow in an up and down direction instead of mow across the steep slope.
Q8: Since I intend to store the mower for the current season, what maintenance is required?
A8: The fuel system requires replacing, the oil needs changing, and the mower has to be cleaned up, afterwards ensure to cap the air cleaner and exhaust outlet to prevent for water and dirt from entering the system.
User Manual
Loading...