Simplicity 1696327, 1696334, 1696326, 1696331, 1696338 User Manual
...
Parts Manual
g
Large Frame Two-Stage
Series Snowthrowers
26" Auger Path
. No. Description
Mf
1695326 L1226E, 11.0GT 26" Snowthrower
1695327 L1226E, 11.0GT 26" Snowthrower (CE/Export)
28" Auger Path
Mfg. No. Description
1695330 L1428E, 13.5GT 28" Snowthrower
1695331 L1428EX, 13.5GT 28" Snowthrower (CE/Export)
30" Auger Path
Mfg. No. Description
1695334 L1530E, 14.5GT 30" Snowthrower
1695335 L1530EX, 14.5GT 30" Snowthrower (CE/Export)
32" Auger Path
Mfg. No. Description
1695338 L1632E, 15.5GT 32" Snowthrower
Rev.
1735346
08/2007
Part No.:
TP 400-4726-00-LW-S
Table Of Content
s
PRODUCT COMPONENTS PAGES
Handle & Controls Group .....................................................................................................................................
Engine & Frame Group ........................................................................................................................................
Auger Drive Group ...............................................................................................................................................
Auger Housing & Chute Group ............................................................................................................................
Traction Drive Group - EZ Turn ...........................................................................................................................
Traction Drive Group - Standard ..........................................................................................................................
Wheel & Tire Group .............................................................................................................................................
Decal Group .........................................................................................................................................................
12
14
18
22
24
26
Torque Specification Chart ..................................................................... Inside Back Cover
4
8
Handle & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987755
The above parts group applies to the following Mfg. Nos.:
1695326 - L1226E
1695327 - L1226E
1695330 - L1428E
1695331 - L1428EX
1695334 - L1530E
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695335 - L1530EX
1695338 - L1632E
4
TP 400-4726-00-LW-S
Handle & Controls Group
PART NO. DESCRIPTIONREF NO QTY.
CAPSCREW, Hex Head 3/8-16 x 2 G5 1 1923701SM 2
KNOB, Interior Thread 3/8-16 2 1732470SM 1
ROD, 3/8 Diameter 5" Large, 3/8-16 x 1 Chute 3 1732427SM 1
WASHER, 3/8 4 1924356SM 1
SPRING 5 50786MA 2
WASHER, 3/8 6 1918266SM 2
NUT, Hex Lock ESNA Light 3/8-16 7 1919439SM 2
HANDLE, Clutch L.H. 8 1722667SM 1
KNOB, Slot Speed 9 1733192SM 1
ROD & PLATE ASSEMBLY, Speed Control 10 1733205SM 1
CAPSCREW, Hex Head 1/4-20 x 2-1/2 G5 11 1923282SM 1
CAPSCREW, Hex Head 1/4-20 x 1-3/4 G5 12 1921962SM 3
BRACKET, Trac & Deflector Control 13 1733045ASM 1
ROD 14 1734354SM 1
NUT, Hex Flange 5/16-18, Whiz Lock Small 15 1931277SM 3
CABLE, Deflector Control 16 1732971SM 1
NUT, Hex 5/16-24 17 2820263SM 2
NUT, Hex Flange 1/4-20 Centerlock Large 18 1960608SM 1
BALLJOINT, Steel 19 50782MA 1
LOCKWASHER, Spring 5/16 20 1917356SM 1
SPRING, Extension 21 1732970SM 1
TUBE & BRACKET ASSEMBLY, Cable Support 22 1732365SM 1
SCREW, Hex Washer Head Taptite 5/16-18 x 1/2 23 1924856SM 4
SUPPORT, Chute Control 14GA 25 1732364SM 1
SCREW, Hex Washer Head Taptite 1/4-20 x 5/8 26 1927429SM 4
BOLT, Shoulder 1/4-20 27 1732944SM 1
BRACKET, Support Quick Turn 28 1733142SM 1
ROD, Chute 29 1732369SM 1
NUT, Hex Lock ESNA Light 1/4-20 30 1920397SM 8
NUT, Hex Jam 3/8-16 31 1917421SM 1
GRIP, Lever 32 306689MA 1
COVER, Panel 33 1733777CSM 1
SCREW, Truss Head Torx Drive 1/4-20 x 3/4 34 1960715SM 4
BELLOWS, Black Rubber Quick Turn 35 1733204SM 1
CAPSCREW, Hex Head 1/4-20 x 1-1/2 G5 36 1922837SM 2
CARRIAGE BOLT, 5/16-18 x 3/4 G5 37 1931333SM 3
SUPPORT, Dash Panel Cover 39 1732064ASM 1
CABLE & SPRING ASSEMBLY, Auger Drive R.H. 40 1732471SM 1
HANDLE, Clutch R.H. 41 1722638SM 1
NUT, Hex Centerlock 1/4-20 42 1923358SM 2
GRIP 43 1726317SM 2
SPACER 44 1715655SM 2
SPACER 45 1678392SM 2
HANDLE, Upper R.H. 47 1734587ASM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695326 - L1226E
1695327 - L1226E
1695330 - L1428E
1695331 - L1428EX
1695334 - L1530E
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695335 - L1530EX
1695338 - L1632E
5
TP 400-4726-00-LW-S
Handle & Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987755
The above parts group applies to the following Mfg. Nos.:
1695326 - L1226E
1695327 - L1226E
1695330 - L1428E
1695331 - L1428EX
1695334 - L1530E
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695335 - L1530EX
1695338 - L1632E
6
TP 400-4726-00-LW-S
Handle & Controls Group
PART NO. DESCRIPTIONREF NO QTY.
HANDLE, Upper L.H. 48 1734586ASM 1
CARRIAGE BOLT, 5/16-18 x 2-1/4 G5 49 1960723SM 4
HANDLE, Lower 50 1732781ASM 1
NUT, Hex Flange 5/16-18 51 1960686SM 4
NUT, Hex Flange 5/16-18 Two-Way Lock 52 1935048SM 2
SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 53 1664847SM 2
BRACKET, Cable Adjusting 54 313441MA 1
BOOT, Spring End Cover 55 308146MA 1
CABLE, 56 1502113MA 1
CAPSCREW, Hex Head 5/16-18 x 1 G5 57 1921333SM 2
SPACER, Powdered Metal 58 1679166SM 1
BRACKET, Free Hand Control 12GA 59 1733505ASM 1
SPACER, Powdered Metal 60 1733095SM 1
ROD & SPRING ASSEMBLY, w/Pin 61 1733509SM 1
WASHER, 1/2 62 1960027SM 4
SPRING, Compression 63 2108360SM 1
WASHER, 1/4 64 1960353SM 1
ROD, Hold Down E-Coat 65 1722630SM 1
HEADLIGHT ASSEMBLY, Oval Amber (Only used on models w/light) 66 1732321SM 1
FASTENER, Panel 67 1704351SM 5
SCREW, Pan Head Torx #10 x 1/2 Thick Cut (Only used on models w/EZ-Turn) 69 1725702SM 1
SPOOL CABLE, Auger Control 70 579860MA 1
SCREW, Round Head Phillips #10-24 x 3/4 72 1960589SM 1
NUT, Hex Lock 10-24 w/Nylon Insert 73 1933896SM 1
CABLE & HANDLE ASSEMBLY (Only used on models w/EZ-Turn) 74 1718791SM 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695326 - L1226E
1695327 - L1226E
1695330 - L1428E
1695331 - L1428EX
1695334 - L1530E
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695335 - L1530EX
1695338 - L1632E
7
TP 400-4726-00-LW-S
Engine & Frame Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
987791
The above parts group applies to the following Mfg. Nos.:
1695326 - L1226E
1695327 - L1226E
1695330 - L1428E
1695331 - L1428EX
1695334 - L1530E
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695335 - L1530EX
1695338 - L1632E
8
TP 400-4726-00-LW-S
Engine & Frame Group
PART NO. DESCRIPTIONREF NO QTY.
ENGINE, 11.5HP B&S - Model #21C2140132E1 1* 1
ENGINE, 10.5HP B&S - Model #20E2140118E1 1* 1
ENGINE, 9.5HP B&S - Model #20A4140117E1 1* 1
ENGINE, 8.5HP B&S - Model #15C1140112E1 1* 1
ENGINE, 8.5HP B&S - Model #15C1140111E1 (CE/Export) 1* 1
ENGINE, 9.5HP B&S - Model #20A4140119E1 (CE/Export) 1* 1
ENGINE, 10.5HP B&S - Model #20E2140113E1 (CE/Export) 1* 1
CORD, Electric Start (Only used on Domestic Models) 2 1724064SM 1
GUARD, Muffler (Only used on 9.5, 10.5, 11.5HP Domestic Models) 3 1734698SM 1
GUARD, Muffler (Only used on 8.5HP Domestic Models) 3 1734732SM 1
SCREW, Hex Washer Head Taptite #10 x 1/2 (Only used on Domestic Models) 4 1929477SM 3
NUT, Push for 1/4 Diameter Thread 5028X76MA4
NUT, Hex Flange 5/16-18 Whiz Lock Small 6 2831277SM 1
NUT, Hex Flange 5/16-18 Esna 7 1960686SM 3
PULLEY, Engine 8 1501109MA 1
WASHER, 3/8 (Used on all models except 8.5HP) 9 1922755SM 2
WASHER, 5/16 (Quantity 3 used on 8.5HP Models) 9 1919381SM 1/3
LOCKWASHER, Spring 3/8 (Used on all models except 8.5HP) 10 1916965SM 1
CAPSCREW, Hex Head 3/8-24 x 1-1/4 G8 (Used on all models except 8.5HP) 11 1960428SM 1
CAPSCREW, Hex Head 5/16-24 x 1-1/4 G8 (Only used on 8.5HP Models) 11 1921982SM 1
V-BELT, 3L, 33.13 Drive 12 1733324SM 1
V-BELT, 4L, 38.5 Auger (Only used on 10.5HP & 11.5HP Models) 13 1733507SM 1
V-BELT, 4L, 36.5 Auger (Only used on 8.5HP & 9.5HP Models) 13 1733051SM 1
STOP, Belt 14 1733014SM 1
LOCKWASHER, Spring 5/16 (8.5HP Models use Quantity 4) 15 1917356SM 3
CAPSCREW, Hex Head 5/16-24 x 3/4 G5 16 1921515SM 2
BRACKET & WELD PIN ASSEMBLY, Idler 17 1501112YZMA 1
BUSHING, Idler Bracket 18 1501065MA 1
SPRING, Extension Idler 19 53704MA 1
IDLER, Plastic Ball Bearing 20 1502120MA 2
NUT, Hex Centerlock Jaam 3/8-16 21 1960251SM 2
CARRIAGE BOLT, 3/8-16 x 1-1/4 G5 22 585781MA 1
IDLER, Auger Assembly (Only used on 10.5HP & 11.5HP Models) 23 1501226YZMA 1
IDLER, Auger Assembly (Only used on 8.5HP & 9.5HP Models) 23 1733055SM 1
SPACER 24 1501200MA 1
WASHER, 1/2 25 1960027SM 1
ARM, Control Powdered Metal 26 1733451SM 1
PIN, Hair 27 711682MA 1
PIN, Clevis 28 1735135SM 1
PANEL, Bottom 29 1740906ASM 1
SCREW, Hex Washer Head Taptite 1/4-20 x 5/8 30 1927429SM 12
SPRING, Extension Auger Idler 31 165X159MA 1
FRAME, EZ Turn Axle (Used on all models except 8.5HP) 32 1733154CSM 1
Footnotes
Note* See your local Briggs & Stratton distributor for parts & service.
The above parts group applies to the following Mfg. Nos.:
1695326 - L1226E
1695327 - L1226E
1695330 - L1428E
1695331 - L1428EX
1695334 - L1530E
Briggs and Stratton Yard Power Products Group
2007Copyright © by Briggs and Stratton Corporation
Milwaukee, WI, USA. All rights reserved
1695335 - L1530EX
1695338 - L1632E
9
TP 400-4726-00-LW-S
Loading...