Simplicity 1695515 User Manual

Parts Manual

g

Not for

Reproduction

24" Dual Stage

Attachment

Mf

. No. Description

1695515 H924RX, 9TP 24" Snowthrower (CE/Export)

Snowthrower

Rev.

1737538 12/2008

Part No.:

TP 400-5017-01-LW-S

Not for

Reproduction

Table Of Content

s

Not for

Reproduction

PRODUCT COMPONENTS PAGES

Handle Assembly Group ......................................................................................................................................

Engine Group .......................................................................................................................................................

Frame Group ........................................................................................................................................................

Auger Housing Group ..........................................................................................................................................

Wheel Group ........................................................................................................................................................

Decals Group .......................................................................................................................................................

Chute Rod Group .................................................................................................................................................

Control Panel Group ............................................................................................................................................

Discharge Chute Group .......................................................................................................................................

Drive Group ..........................................................................................................................................................

Gear Case Group .................................................................................................................................................

Shift Group ...........................................................................................................................................................

Torque Specification Chart ..................................................................... Inside Back Cover

10 12 14 16 18 20 22 24 26

4 6 8

Handle Assembly Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1742038

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

4

TP 400-5017-01-LW-S

Handle Assembly Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

HANDLE, UPPER LH 720 1740587ASM 1 HANDLE, UPPER RH 721 1740573ASM 1 SCREW, 5/16-18 x 2.75 724 11234MA 1 WASHER, FLAT 725 71071MA 3 WASHER, SPTLK .31X.58X.08 726 71060MA 1 NUT, 5/16-18 REGHEX 727 15X144MA 3 STOP, RED PLASTIC 728 11261MA 3 GRIP-HANDLE FINGER 729 337399MA 2 LEVER, ASSY CLUTCH DRIVE RH 730 1740700AYP 1 LEVER, ASSY CLUTCH DRIVE LH 731 1740699AYP 1 ROD, PIVOT CLUTCH 733 337381MA 1 NUT, PUSH ON CAP 734 761105MA 2 SPACER-HANDLE 735 337373MA 1 BUMPER, RECTANGLE 739 4049MA 2 CABLE, CLUTCH 28.44L 740 1501123MA 1 CABLE, AUGER CLUTCH 741 761872MA 1 BRACKET, CABLE ADJUSTER 743 313441MA 1 SPRING, AUGER CLUTCH 744 1673MA 1 NUT, 1/4-20 745 15X145MA 2 HANDLE, LOWER 750 1740701ASM 1 SCREW 751 25X021MA 4 BRKT, GEAR SELECTOR 755 1740698ASM 1 SCREW, 5/16-18 x 2.00 756 6751MA 2 SCREW, 1/4-20 X 0.63 757 310169MA 2 SPOOL-CABLE, AUGER CLUTCH 759 579860MA 1 BRACKET, CABLE SPOOL YZ 760 1501059YZMA 1 CABLE, LOWER DRIVE 12" 762 1501122MA 1 BOLT, HEX 1/4-20 X 1.50 YZ 763 001798MA 1 BOOT, CLUTCH SPRING 765 308146MA 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

5

TP 400-5017-01-LW-S

Engine Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1742202

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

6

TP 400-5017-01-LW-S

Engine Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

CORD, Starter 1 6219MA 1 ENGINE (Model# 12D1160124E8) 2 ----- 1 BOLT, CARRIAGE 5/16-18 3002X97MA 4 RETAINER, PUSH 4028X76MA 4 NUT 5/16-18 5 1960686SM 4 PULLEY, ENGINE 6 1736102YP 1 WASHER 7 17X146MA 1 WASHER .38ID 8 71060MA 3 SCREW, 3/8-24 x 1.00 9 910828MA 1 BELT, V 3L 10 1733324SM 1 BELT, V 4L 11 1736421YP 1 BRACKET ASSEMBLY, IDLER 12 1501112YZMA 1 BUSHING, IDLER BRACKET 13 1501065MA 1 WASHER, SPLIT 14 71060MA 1 SCREW 5/16-24 X 0.75 15 710097MA 1 SPRING, IDLER TRACTION DRIVE 16 53704MA 1 PULLEY, IDLER 17 1502120MA 1 NUT, JAM 3/8-16 18 590MA 1 GUIDE, BELT 20 1501201MA 1 WASHER .31X.58X.08 22 71060MA 1 SCREW, 5/16-24 x 0.75 24 710097MA 2 FRAME, MOTORBOX (5-11HP) 25 ----- 1 PLATE, ENGINE MOUNT 25-1 1740574CYP 1 SCREW, TAP 1/4-20 X .63 25-2 310169MA 1 SCREW, TAP 5/16-18 X .50 25-3 25X020MA 1 FRAME, MOTOR BOX 25-4 1735753CYP 1 KEY, BRIGGS ENGINE 26 794696 1 DEFLECTOR, Muffler 27 794213 1 SCREW, 28 699854 1 HEAT SHIELD, Muffler 29 1734732SM 1 SCREW, Hex-Washer 30 1736103SM 1

Footnotes

Note* See your local Briggs & Stratton distributor for parts

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

7

TP 400-5017-01-LW-S

Frame Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1742203

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

8

TP 400-5017-01-LW-S

Frame Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

COVER, BOTTOM 90 1740906ASM 1 SCREW, 1/4-20X .63 91 310169MA 12 IDLER ASSEMBLY, AUGER 103 1501226YZMA 1 PIN, HAIR .38DIAX1.64LG 105 711682MA 1 PIN, CLEVIS 3/16" DIA 106 1736381YP 1 SPRING, TENSION 107 165X159MA 1 ARM, CONTROL 108 1733451SM 1 BOLT, 3/8-16X1.25 CARR. 110 585781MA 1 WASHER, FLAT 111 711617MA 2 WASHER 112 017X48MA 1 SCREW, TAP 5/16-18 X 0.50 122 25X020MA 8 SCREW, TAP 5/16-18 X 0.75 123 25X021MA 2 PULLEY, IDLER 148 1502120MA 1 NUT, JAM 3/8-16 149 590MA 1 COVER, BELT 160 1502169MA 1 SCREW, TAP 162 26X306MA 1 WASHER, FLAT 166 71067MA 1 SPACER, AUGER BRACKET 168 1502041MA 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

9

TP 400-5017-01-LW-S

Auger Housing Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1742204

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

10

TP 400-5017-01-LW-S

Auger Housing Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

PULLEY, 4L 6.12X .67 480 1501211MA 1 SCREW, 5/16-18 x 0.63 481 577400MA 2 KEY, SQUARE 3/16 X 3/4 482 2001022MA 1 SPACER, FRICTION PULLEY 485 1501158MA 1 RETAINER, BALL BRNG 490 582957YZMA 1 BEARING, BALL 491 1705897SM 1 BOLT, HEX 5/16-18X .50 493 001X45MA 3 NUT, 5/16-18 HEXWDFLLK 499 710026MA 1 ASSY, HOUSING 500 729061CYP 1 BLADE, SCRAPER 510 760657E701MA 1 BOLT, 5/16-18X.75 511 340720MA 5 NUT, 5/16-18 514 710026MA 12 PLUG 515 309235MA 2 ASSY, LH AUGER 520 1501441E701MA 1 ASSY, RH AUGER 521 1501440E701MA 1 SCREW, 1/4-20X1.75 522 9524MA 2 SPACER, SLEEVE 523 3943MA 2 NUT, 1/4-20 524 73826MA 2 BEARING, FLANGE 525 9517MA 2 NUT, 5/16-18 526 711862MA 6 SCREW, 5/16-18 x 0.75 527 9357MA 6 SKID, HEIGHT ADJUST 540 1740912AYP 2 BOLT, 5/16-18 X .75 541 7090799SM 4 NUT, 5/16-18 544 710026MA 1 BRUSH, CLEANOUT 550 1736094YP 1 CLIP, RETAINER 551 1501672MA 2 SCREW 552 06X115MA 2 NUT 553 15X146MA 2 BLOCK 554 578063MA 1 KIT, SHEAR BOLT -- 1501216MA 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

11

TP 400-5017-01-LW-S

Wheel Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1741949

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

12

TP 400-5017-01-LW-S

Wheel Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

SHAFT, AXLE 650 1501562YZMA 1 SPRKT & HUB 652 1501089MA 1 SCREW, 1/4-20 x 1.75 653 01X193MA 1 NUT, 1/4-20 HEX NYLOCK 654 15X145MA 1 BEARING, AXLE 655 1501114MA 1 WASHER, FLAT 671 017X83MA 2 BUSHING, WHEEL 673 1501139MA 2 TIRE & RIM 675 580349MA 1 SCREW, 1/4-20X1.75 HH 676 577015MA 1 RING, RET 678 239MA 1 PIN, KLIK .25 X 1.38 DIA 679 73842MA 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

13

TP 400-5017-01-LW-S

Decals Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1742207

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

14

TP 400-5017-01-LW-S

Decals Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

DECAL, Gear Select 1 1737053YP 1 DECAL, ISO Chute CE 3 1742213YP 1 DECAL, 104db CE 4 48X5386MA 1 DECAL, Face, Head Phones 5 304427MA 1 DECAL, Model Number 6 1742240YP 1 DECAL, ISO Auger CE 7 1742212YP 1 DECAL, Traction, Auger 8 48X5605MA 1 DECAL, Belt Adjustment 9 5131MA 1 DECAL, Clean & Clear Brush 10 48X5960MA 1 DECAL, Danger, Chute 11 1740979MA 1 DECAL, Simplicity Swoosh 12 1735113SM 1 DECAL, Simplicity Stripe 13 1733071SM 1 OWNER’S MANUAL * -- 1742227 1

Footnotes

Note* Not a serviceable part.

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

15

TP 400-5017-01-LW-S

Chute Rod Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1741718

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

16

TP 400-5017-01-LW-S

Chute Rod Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

ASSEMBLY, YOKE & ROD 852-1 1501533YZMA 1 SPRING 852-2 164X37MA 1 GEAR, CHUTE ROTATION 9T 852-3 1501067MA 1 WASHER 852-4 017X48MA 1 PIN, COTTER 852-5 579493MA 1 BRACKET, CHUTE GEAR 852-6 1740591AYP 1 PIN, HAIR 852-7 1501293MA 1 ASSEMBLY, YOKE ADAPTER YZ 852-8 1501075YZMA 1 PIN, HAIR 852-9 711682MA 1 PIN, UNIVERSAL JOINT 852-10 578060MA 1 PIN, CLEVIS 852-11 578309MA 1 HOUSING, UNIVERSAL 852-13 578063MA 1 KNOB, SLEEVE 854 51443MA 1 FLATWASHER 855 309312MA 1 NUT, PUSH ON 3/8" 856 73664MA 1 EYE BOLT 3/8-16X6.50 860 1501456MA 1 GROMMET, EYE BOLT 861 148MA 1 NUT, 3/8-16 HEXJAM 863 71045MA 1 FLATWASHER .406X.81X.066 864 71072MA 1 NUT, 3/8-16 HEXNYL 867 71046MA 1 BOLT, CARRIAGE 1/4-20 X 1.00 868 02X101MA 1 NUT, 1/4-20 869 15X145MA 1 CRANK, ASSY CHUTE 870 1501074YZMA 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

17

TP 400-5017-01-LW-S

Control Panel Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1742206

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

18

TP 400-5017-01-LW-S

Control Panel Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

PANEL 770 1740930CYP 1 BOLT, Carriage, 25-20 X 1-1/2" 771 002X99MA 4 WASHER 772 71067MA 4 NUT 773 15X145MA 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

19

TP 400-5017-01-LW-S

Discharge Chute Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1742205

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

20

TP 400-5017-01-LW-S

Discharge Chute Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

CHUTE ASSEMBLY 580 1736380CYP 1 WING KNOB 597 1501260MA 1 BOLT, 5/16-18 X .75 599 1931333SM 1 BOLT, 5/16-18 X 1.00 601 2X100MA 1 WASHER, Flat 602 71071MA 1 NUT, Hex, Nylock, 5/16-18 603 71038MA 1 CHUTE Collar 606 1501932YZMA 1 SCREW, 1/4-20 X 0.75 607 02X101MA 1 NUT, 1/4-20 Hex Nylock 609 15X145MA 1 RING, Retainer, Inner 610 1741917YP 1 RING, Retainer, Outer 611 1501282MA 1 CAPSCREW, Hex-Flange, 1/4-20 x .75 613 1935450SM 4 NUT, Hex, Nylock Flange, 1/4-20 614 5025391SM 4 WASHER, Nylon 616 2860210SM 1 GUARD, Chute 617 1733475SM 1 BRACKET, Chute Guard 618 1733967AYP 1 NUT, Push 619 1960140SM 2 SCREW, Hex-Washer, Taptite, 1/4-20 X 1/2" 620 1925003SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

21

TP 400-5017-01-LW-S

Drive Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1740818

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

22

TP 400-5017-01-LW-S

Drive Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

LF AXLE, SWING PLATE YZ 200 1501092YZMA 1 CHAIN, ROLLER #420x19.00 201 579851MA 1 BEARING AND RETAINER, ASSY 203 334163MA 1 WASHER 204 579858MA 1 SCREW, TAP 5/16-18 x 0.5 206 25X020MA 1 ASSY, HEX SHAFT 207 1501236MA 1 CHAIN, ROLLER #420x18.00 LG 208 579868MA 1 BEARING, TRUNION CLUTCH R 210 337029MA 1 WHEEL, FRICTION DISC 212 1501435MA 1 BOLT 213 001X38MA 3 NUT, KEPS HEX 1/4-20 215 303008MA 3 RING, RETEXT 217 1733326SM 1 WASHER 218 579858MA 4 BEARING AND RETAINER, ASSY 220 334163MA 4 SCREW, TAP 5/16-18 x .5 221 25X020MA 8 FRICTION PULLY 223 1501115MA 1 LF PLATE, SWINGING YZ 225 1501057YZMA 1 SPACER, FRICTION PULLEY 226 1501158MA 1 NUT, FLANGE LOCK 3/8-24 227 15X114MA 1 RETAINER, RING 229 11X30MA 4 ASSY, LF SPRING LINK YZ 230 1502105YZMA 1 RETAINER, RING 232 11X30MA 1 SPRING, EXTENSION 234 1736469YP 3 WLD, INTERMED SPROCKET 33T/7 236 1501237MA 1 WASHER, FLAT 238 71074MA 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

23

TP 400-5017-01-LW-S

Gear Case Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1741617

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

24

TP 400-5017-01-LW-S

Gear Case Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

CASE, GEAR, RH 300 10577MA 1 CASE, GEAR, LH 301 10576MA 1 SCREW,1/4-20X.75 303 710025MA 7 NUT,1/4-20 304 15X143MA 7 SCREW, 3/8-16 x 0.50 306 9344MA 1 SEAL, OIL 310 9566MA 1 BEARING, FL 311 50304MA 1 WASHER, FLAT 312 48275MA 1 SHAFT, AUGER OUTPUT 313 1501189MA 1 GASKET, GEAR BOX 314 51279MA 1 GEAR, WORM 315 51405MA 1 KEY, WOODRUFF #61 316 431787MA 1 BRNG, FL 320 50221MA 1 SHAFT, AUGER INPUT (IMPELLER) 321 1501191MA 1 COLLAR, THRUST 322 580295MA 1 PIN, SPRING 323 454565MA 1 WASHER, FLAT 324 48275MA 4 BRNG, ROLL 325 50684MA 1 BRNG, FL 326 50304MA 3 SEAL, OIL 327 9566MA 3 IMPELLER 340 1501188E701MA 1 PIN, SPRING 341 454565MA 3 10oz TUBE LUBRIPLATE (Not Illustrated) -- 333431MA 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

25

TP 400-5017-01-LW-S

Shift Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1740953

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

26

TP 400-5017-01-LW-S

Shift Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

ROD, SHIFT 790 1740946AYP 1 SCREW, 1/4-20X.75 791 302628MA 1 NUT, 1/4-20 792 73826MA 1 KNOB, SLIP 796 331624MA 1 LEVER, SPRING 800 760564MA 1 SCREW, 1/4-20X.75 801 302628MA 1 NUT, 1/4-20 802 73826MA 1 BEARING, FLANGED 811 579944MA 1 ROD ASSY., SPEED SELECT 812 1501085YZMA 1 RETAINER, RING 813 11X30MA 1 WASHER 814 579858MA 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695515 - H924RX

2008

27

TP 400-5017-01-LW-S

Not for

Reproduction

Hardware Identification & Torque Specifications

No

Marks

0

1/4 3/4

1/2

21

1/4 3/4

1/2

1/4 3/4

1/2

1/4 3/4

1/2

4

Not for

Reproduction

Torque Specification Chart

FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)

Property Class

Size Of Hardware

M3 M4 M5 M6 7.3 10.3 12.1 M7 12.1 16.9 19.9 M8 17.7 M10 35 50 M12 61 86.2 103 140 M14 M16 147 210 250 340 M18 202 287 346 470 M20 290 405 486 660 M22 390 559 656 890 M24 497 M27 733 1032 1239 1680 M30 995 1401 1681 2280 M33 M36 1740 2441 M39 2249 3163

The guides and ruler furnished below are designed to help you select the appropriate hardware.

010

Nut, M8

Thread Diameter (mm)

Inside Diameter (in)

Nut, 1/2-16

Class 5.6

in/lbs

ft/lbs

5.88

13.44

26.4

44.64

5.2

7.7 15 26 42 64 89

126 169 217 320

435 590 759 988

20

5.6

Nm. Nm. Nm.

.56

1.28

2.50

4.3

7.1

10.5 21

36 58 88

121 171

230 295 435 590

800 1030 1340

30

8.8

Class 8.8

in/lbs

ft/lbs

13.44 1.80

30.72 43.44 52.56

60.96

Class 10.9

in/lbs

ft/lbs

19.2 22.92

1.28

2.90

5.97 7.15

5.75

9.9

16.5 24 48 83

101

136 162 220

132 200 275 390 530

708

375 995

1350

1349

1902 2278 3090

1830 2360 3050

50

60

Body Length

40

Screw, M8- 1.25 x 25

Thread Diameter (mm)

Threads per inch

Body Diameter

Screw, 1/2- 16 x 2

10.9

4.10

8.10 14 23

25

34

67 117 185 285 390 550 745 960

1400 1900 2580 3310 4290

80

Diameter

Distance between threads (mm)

Threads per inch

3

12.9

Class 12.9

in/lbs

ft/lbs

29 59

840 1140

2935 3980 3798

Body

Nm.

2.15

4.95

9.7

16.5 27 40 81

5150

90 10070

Body Length (mm)

Body Length (in)

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 29 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

b. for flange whizlock nuts and screws - use 135% of

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

Common Hardware Types

Hex Head Capscrew

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

19 20 27 31 66 76

2.1

2.3

3.1

3.5

30 31 43 49

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

in/lbs

3.4

3.5

4.9

5.5

NOTES

torques.

grade 5 torques.

41 43 60 68

Washer

4.6

4.9

6.8

7.7

Standard Hardware Sizing

When a washer or nut is identified as 1/2” (M8), this is

Nominal size

the (8mm metric thread diameter); if a second number is present it represents the

When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the metric thread diameter), the second number,16, represents the

threads per inch, (1.25 thread diameter).

body length of the bolt or screw, 2 inches (50mm).

, meaning the

threads per inch

Nominal size

inside diameter

is 1/2 inch

(distance between threads).

, or body diameter is 1/2 inch (8mm

The final number is the

Carriage Bolt

Wrench & Fastener Size Guide

1/4” Bolt or Nut

Wrench—7/16”

M6 Bolt or Nut

Wrench—10mm

5/16” Bolt or Nut

Wrench—1/2”

M8 Bolt or Nut

Wrench—13mm

3/8” Bolt or Nut

Wrench—9/16”

M10 Bolt or Nut

Wrench—17mm

7/16” Bolt or Nut

Wrench (Bolt)—5/8” Wrench (Nut)—11/16”

M12 Bolt or Nut

Wrench—19mm

Lockwasher

Hex Nut

1/2” Bolt or Nut

Wrench—3/4”

M14 Bolt or Nut

Wrench—22 mm

IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS

Not for

Reproduction

WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO

MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY

OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.

Briggs & Stratton Yard Power Products Group

3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 USA

www.simplicitymfg.com

2008

Simplicity 1695515 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual