Simplicity 1695395 User Manual

Parts Manual

g

Not for

Reproduction

Conquest

4WD Series Garden Tractors & Mower Decks

23HP Product

Mf

. No. Description

1695415 Conquest, 23HP B&S Hydro 4WD 2690679 Conquest, 23HP Hydro 4WD RMO and 50" Mower Deck

2690744 Conquest, 23HP Hydro 4WD RMO and 50" Mower Deck

Mower Decks

Mfg. No. Description

1695395 50" Mower Deck

(CE/Export)

Rev.

1735723 01/2009

Part No.:

TP 400-4805-B-CQ-S

Not for

Reproduction

Table Of Content

s

Not for

Reproduction

PRODUCT COMPONENTS PAGES

Frame & Front Axle Group - 4WD .......................................................................................................................

Power Steering & Hydraulic Lift Group ................................................................................................................

Steering Group - Tilt Steering ..............................................................................................................................

Engine Group - 20HP, 22HP & 23HP Briggs & Stratton, Vanguard Twin ...........................................................

Transmission Group .............................................................................................................................................

Transaxle SERVICE PARTS - Tuff Torq KXH10NC ............................................................................................

Controls Group .....................................................................................................................................................

Cruise Control Group ...........................................................................................................................................

Electrical Group ....................................................................................................................................................

Hood, Grille & Dash Group ..................................................................................................................................

Seat & Seat Deck Group ......................................................................................................................................

Lift Group - Manual Lift .........................................................................................................................................

Wheels & Tires Group ..........................................................................................................................................

Decals Group .......................................................................................................................................................

44" & 50" Mower Deck - Clutch & Support Group ...............................................................................................

50" Mower Deck - Height Adjustment & Roller Bar Group ..................................................................................

50" Mower Deck - Housing, Arbors & Blades Group ...........................................................................................

Torque Specification Chart ..................................................................... Inside Back Cover

10 12 14 18 24 26 28 32 34 36 38 40 42 44 46 50 54

4 8

Frame & Front Axle Group - 4WD

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987590

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

4

TP 400-4805-B-CQ-S

Frame & Front Axle Group - 4WD

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

FRAME ASSEMBLY, Front & Rear 4WD 1 1734731ASM 1 TOWER & SUPPORT ASSEMBLY 2 1733139ASM 1 SUPPORT, Seat Deck 3 1723528ASM 1 BACKPLATE, Hitch 4 1722602ASM 1 BRACKET ASSEMBLY, Steering 4WD 5 1733918ASM 1 BUMPER, 4GA 6 1721805ASM 1 AXLE ASSEMBLY, Front 7 1733480SM 1 PIVOT ASSEMBLY, Axle w/Bushings 8 1734241ASM 1 CAPSCREW, Hex Head, 5/8-11 x 2-1/2 G5 9 1960755SM 1 CARRIAGE BOLT, 3/9-16 x 3/4 G5 12 1931348SM 2 JOINT, Ball 1/2-20 13 1702779SM 1 SPACER 14 1708236SM 1 NUT, Hex Jam, 1/2-20 15 1919262SM 1 NUT, Hex Flange, 3/8-16 Two-Way Lock 16 1930645SM 1 BRACKET, Cylinder Mounting 18 1733166ASM 1 SPACER 20 2172914SM 1 CYLINDER, Hydraulic Steering 21 1733759SM 1 CAPSCREW, Hex Head, M12-1-3/4 x 35 22 197487SM 3 SHAFT & BRACKET ASSEMBLY, Axle Pivot 23 1733863SM 1 WASHER, 5/8 24 1960035SM 2 STOP, "L" Steering 25 1734511ASM 1 SCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 26 1664847SM 4 NUT, Hex Flange 5/8-11 Two-Way Lock 27 2860646SM 2 SCREW, Hex Washer head, Taptite, 3/8-16 x 3/4 28 1923683SM 4 NUT, Hex Flange 1/2-13 Whiz Lock 29 2860668SM 2 NUT, Hex Flange 3/8-16 Whiz Lock 30 1928352SM 4 CAPSCREW, Hex Head 1/2-13 x 1 G5 31 1923114SM 2 CAPSCREW, Hex Head 3/8-16 x 1 G5 32 1921210SM 2 SCREW, Truss Head Torx Drive 5/16-18 x 7/8 33 1960086SM 4 PIN, Dowel 34 1733581SM 2 WASHER, 1/2 35 1960170SM 3 LOCKWASHER, Spring 36 1916966SM 3 PIN, Cotter 37 1923360SM 1 LOCKWASHER, Spring 38 1960754SM 6 CAPSCREW, Hex Head 39 1950036SM 6 SPACER, Powdered Metal 40 1667812SM 1 FITTING, Hose Elbow, 45 Degrees, 13/16-16 x 3/4-16 41 1733403SM 2 HOSE ASSEMBLY, Hydraulic 42 1733400SM 1 HOSE ASSEMBLY, Hydraulic 43 1737063SM 1 BRACKET, Hose Mounting 10GA 44 1733501ASM 1 FITTING, Bulkhead Union 13/16-16 45 1733402SM 2 CARRIAGE BOLT, 5/16-18 x 3/4 G5 46 1931333SM 2 NUT, Hex KEPS, 5/16-18 47 1960636SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

5

TP 400-4805-B-CQ-S

Frame & Front Axle Group - 4WD

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987590

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

6

TP 400-4805-B-CQ-S

Frame & Front Axle Group - 4WD

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

NUT, Jam 13/16-16 48 1733947SM 2 WASHER, 3/8 49 1960103SM 1 CARRIAGE BOLT, 3/8-16 x 2-1/4 G5 50 1931355SM 1 SUPPORT, Steering Unit 7GA 51 1733044ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 1/2 52 1924856SM 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

7

TP 400-4805-B-CQ-S

Power Steering & Hydraulic Lift Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987548

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

8

TP 400-4805-B-CQ-S

Power Steering & Hydraulic Lift Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

POWER STEERING UNIT, 32CC, 4 Ports 1 1733409SM 1 LOCKWASHER, Spring 2 1916964SM 4 CAPSCREW, Hex Head 3 2860444SM 4 TUBE, Hydraulic 4 1722138SM 1 TIE, Self Locking 5 2825094SM 2 TUBE, Hydraulic 6 1733727SM 1 SCREW, Hex Whiz Lock Flange 1/4-20 x 1/2 7 1931646SM 2 FITTING, Straight 8 1722123SM 4 FILTER, Oil 9 1719168SM 1 BASE, Oil Filter 10 1719169SM 1 TUBE, Hydraulic 11 1733427SM 1 FITTING, Hose Elbow Perma Push 9/16-18 12 1733230SM 2 SCREW, Round Head Plastite 13 1722607SM 1 COVER, Lift 14 1722285SM 1 HOSE ASSEMBLY, 27" Port R 25 1733893SM 1 HOSE ASSEMBLY, 18" Port T 26 1733791SM 1 HOSE ASSEMBLY, 26" Port P 27 1733780SM 1 HOSE ASSEMBLY, 31" Port L 28 1733595SM 1 POWER STEERING ASSEMBLY (Includes Ref Nos 1, 25, 26, 27 & 28) 29 1733894SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

9

TP 400-4805-B-CQ-S

Steering Group - Tilt Steering

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987424

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

10

TP 400-4805-B-CQ-S

Steering Group - Tilt Steering

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

STEERING WHEEL 1 1733363SM 1 PLATE, Steering Mounting 4 1724685ASM 1 CARRIAGE BOLT, 5/16-18 x 1-1/4 G5 5 1960655SM 2 ADAPTER, Tilt 6 1725294SM 1 SPACER 7 1723898SM 2 NUT, Push Pal 8 1933988SM 2 NUT, Hex Keps 5/16-18 9 1960636SM 2 STEERING UNIT, Tilt 10 1734002SM 1 BELLOWS, Tilt Steering Unit w/Slot 11 1724368SM 1 CAP, Steering Wheel 12 1725024SM 1 DECAL, Power Steering (Not Shown) 13 1716518SM 2 NUT, Hex Lock ESNA Light 5/8-18 15 1960576SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

11

TP 400-4805-B-CQ-S

Engine Group - 20HP, 22HP & 23HP Briggs & Stratton, Vanguard Twin

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986651

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

12

TP 400-4805-B-CQ-S

Engine Group - 20HP, 22HP & 23HP Briggs & Stratton, Vanguard Twin

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

MUFFLER 1 1736543SM 1 MUFFLER (Only used on 20HP Models) 1 1722625SM 1 GASKET 2* 2 LOCKWASHER, 5/16 3 1917356SM 4 CAPSCREW, Socket Head, 5/16-18 x 7/8, G8 4 2860660SM 4 HOSE, Oil Drain 5 1723165SM 1 ENGINE, 22HP Briggs & Stratton VANGUARD Twin, Model 386777, Type 0111E1 6* 1 ENGINE, 23HP Briggs & Stratton VANGUARD Twin, Model 386777, Type 0111E1 6* 1 ENGINE, 21HP Briggs & Stratton VANGUARD Twin, Model 385777, Type 0119-E1 6* 1 ENGINE, 20HP Briggs & Stratton VANGUARD Twin, Model 358777, Type 0110-E1 6* 1 SEAL, Circle 7 1722949SM 1 BULKHEAD 8 1722388ASM 1 CAPSCREW, Hex Head Taptite, 1/4-20 x 1/2 9 1925003SM 2 CONTROL, Throttle Double 39" Long w/Knobs (Only used on 20HP Models) 10 1727223SM 1 CONTROL, Throttle Double 10 1734506SM 1 TIE 11 1701011SM 1 CLAMP, Hose Type E 12 2860112SM 2 HOSE, 59" Long 13 1718678SM 1 CLIP, Wire 14 2834683SM 2 SHIELD 15 1722392ASM 2 SCREW, Hex Head Taptite, 1/4-20 x 3/8 16 1927428SM 8 KEY 17 1720463SM 1 PULLEY & HUB ASSEMBLY, 4-1/2 OD 18 1722288SM 1 WASHER, Hex 19 1708264SM 1 LOCKWASHER, 7/16 20 1918199SM 1 CAPSCREW, Hex Head, 7/16-20 x 2-3/4 21 1960648SM 1 CLUTCH, Electric, OGURA 22 1686883SM 1 CLUTCH, Electric, Big Brake OGURA 22 1720532SM 1 TIE 23 2832747SM 1 CAPSCREW, Hex Head Taptite, 3/8-16 x 1-1/2 24 2830598SM 4 LOCKWASHER, External Tooth, 3/8 25 2820427SM 1 SHIELD, Muffler Bottom 26 1722414ASM 1 CAPSCREW, Hex Head Flange Lock, 1/4-20 x 5/8 27 1960295SM 8 CAPSCREW, Hex Head Taptite, 5/16-18 x 1/2 28 1924856SM 2 NUT, Speed, 1/4-20 29 1960368SM 8 NUT, Speed, 5/16-18 30 1935255SM 2 DUCT, Muffler Top 31 1722389ASM 1 DUCT, Muffler Extension 32 1722390ASM 1

Footnotes

Note* See your local Briggs & Stratton distributor for parts and service.

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

13

TP 400-4805-B-CQ-S

Transmission Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987547

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

14

TP 400-4805-B-CQ-S

Transmission Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

TRANSMISSION ASSEMBLY, K664 1 1733478SM 1 PULLEY & HUB ASSEMBLY 2 1722194SM 1 FAN 3 1719233SM 1 SCREW, Hex Washer Head, Taptite, 1/4-20 x 1-1/4 4 1933958SM 3 BELT, 94.05 5 1721392SM 1 STRAP, 4-1/4 Long 6 1721593ASM 1 ARM, Control 7GA 7 1733318ASM 1 ROD, 17-27/64 Long 8 1721424SM 1 SPRING, Compression 9 1722684SM 1 SPRING, Compression 10 1729277SM 1 CAP, Expansion 11 1722711SM 1 SCREW, Pan Head Torx, 1/4-20 x 1-1/4 Taptite 12 1960676SM 2 FASTENER, Panel 13 1704351SM 15 PAD, Footrest L.H. 14 1722174SM 1 PAD, Footrest R.H. 15 1722173SM 1 ROD, Free Wheel 16 1721622SM 1 KNOB, Interior Thread 17 1723126SM 1 SUPPORT, Transmission 18 1721728ASM 2 HOSE, Hydraulic 19 1733531SM 1 BOLT, Shoulder, 3/8-16 21 1732129SM 3 CLIP, Hair Pin 22 1960074SM 1 SPACER 23 1734337SM 1 CLAMP, Hose Worm 24 2860266SM 1 WASHER, 1/2 25 1960027SM 3 WASHER, 3/8 26 1924940SM 1 PIN, Quick 27 1722460SM 1 TANK, Oil Natural 28 1732989SM 1 CLAMP, Hose Worm 29 1723214SM 2 NUT, Hex Flange 5/16-18 ESNA 30 1960686SM 6 COTTER PIN 31 1918447SM 1 CAPSCREW, Hex Head 5/16-18 x 2-1/2 G5 32 1921719SM 1 WASHER, 5/16 33 1960141SM 1 CARRIAGE BOLT, 5/16-18 x 1 G5 34 1931335SM 1 NUT, Hex KEPS 5/16-18 35 1960636SM 2 NUT, Hex Flange 36 1719968SM 1 NUT, Hex Flange 3/8-16 ESNA 42 1960687SM 4 WASHER, 7/16 43 1918267SM 1 CARRIAGE BOLT, 3/8-16 x 1 G5 44 1931350SM 6 CAPSCREW, Hex Head 5/16-18 x 3 G5 45 1960590SM 4 WASHER, 5/16 46 1919326SM 3 NUT, Hex Keps 3/8-16 47 1960637SM 6 ACTUATOR, Switch 48 1727215ASM 1 POP RIVET 49 1960241SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

15

TP 400-4805-B-CQ-S

Transmission Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987547

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

16

TP 400-4805-B-CQ-S

Transmission Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

PIN, Clevis 50 1724107SM 1 BEARING 51 1722648SM 1 HOSE, Hydraulic 52 1722468SM 1 CAPSCREW, Hex Head, 5/16-18 x 2-1/4 G5 53 1921160SM 1 SPACER 54 1713588SM 1 PIVOT ASSEMBLY, Control 55 1733320ASM 1 ARM, Control 56 1733525ASM 1 TUBE, Hydraulic 4WD 57 1733483SM 1 TUBE, Hydraulic Rear 58 1733484SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

17

TP 400-4805-B-CQ-S

Transaxle SERVICE PARTS - Tuff Torq KXH10NC

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1733480

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

18

TP 400-4805-B-CQ-S

Transaxle SERVICE PARTS - Tuff Torq KXH10NC

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

FRONT AXLE 1 1733480SM 1 MOTOR KIT 10CC 2* 1 MOTOR COVER, Complete 3* 1 FRONT GEAR BOX, Left, Complate 4* 1 FRONT GEAR BOX, Right, Complete 5* 1 O-RING 1A P14 10 1707879SM 1 WASHER 12 11 1708689SM 1 NUT 12 12 1708692SM 1 SNAP RING 13 1707912SM 1 PACKING P 14.0 14 1735417SM 1 BACK-UP RING 15 1735418SM 1 JOINT PIPE 16 * 1 FRONT AXLE CASE 21 * 1 O-RING P18 22 1707786SM 1 OIL CAP 20 23 1735419SM 1 BOLT 8 x 20 24 1724695SM 1 ELBOW 25 1735420SM 1 FULCRUM 27 * 1 ADJUST PLATE 31 * 1 CONTROL LEVER 32 * 1 NUT 8 33 1707898SM 1 SEAL TC 162607 34 * 1 CONTROL SHAFT 35 * 1 CAM LEVER 36 * 1 MOTOR COVER 37 * 1 GASKET COVER 38 1735421SM 1 RETURN SPRING 39 * 1 CONTROL ARM 41 * 1 SPRING PIN 6 x 25 42 1718097SM 1 SPRING PIN 6 x32 43 * 1 BOLT 8 x 25 44 1720867SM 1 BOLT 8 x 100 45 * 1 BOLT 8 x 85 46 * 1 BOLT 8 x 65 47 * 1 WASHER 8 48 1707896SM 1 CONNECTING BLOCK 49 * 1 BUSH 12 x 15 x 11.5 53 * 1 BEARING 6906 C3 54 * 1 BEARING 6908 C3 56 * 1 BOLT 10 x 30 57 * 1 PIN 10 x 18 71 * 1 BOLT 8 x 90 72 1726291SM 1 MOTOR SHAFT 10CC 73 * 1

Footnotes

Note* See your local authorized Tuff Torq dealership for parts and warranty or visit TuffTorqServices.com.

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

19

TP 400-4805-B-CQ-S

Transaxle SERVICE PARTS - Tuff Torq KXH10NC

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1733480

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

20

TP 400-4805-B-CQ-S

Transaxle SERVICE PARTS - Tuff Torq KXH10NC

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

BEARING 6001 C3 74 * 1 SNAP RING 12 75 * 1 RING 28 76 * 1 CYLINDER BLOCK KIT 77 1718079SM 1 PIN 10 x 13 81 * 1 SWASH SUPPORT RIGHT 82 * 1 THRUST METAL 83 1718089SM 1 SWASH PLATE 84 * 1 THRUST BEARING 51106 85 1718078SM 1 SWASH SUPPORT LEFT 88 * 1 PACKING S 10.0 95 * 1 CENTER CASE 10CC CMP 100 * 1 CHECK VALVE CMP 101 * 1 COLLAR 102 * 1 SCREEN 103 1726116SM 1 JOINT SHAFT N 116 * 1 SPLINE COLLAR B 117 * 1 BEARING 6002 C3 118 * 1 BEVEL GEAR KIT 119 * 1 PIN 8 x 16 122 1720848SM 1 AXLE FLANGE 123 * 1 PACKING G 45.0 124 1735422SM 1 SEAL TC466411 126 * 1 FINAL PINION GEAR (9T) 128 * 1 FRONT GEAR CASE 129 * 1 SHAFT FRONT 2ND 130 * 1 BEARING 6003 C3 131 1735423SM 1 SEAL CAP 56 132 1735424SM 1 WASHER 10 134 1714658SM 1 TIE ROD COMPLETE N 135 1735425SM 1 TIE ROD PIN LEFT 136 * 1 NUT 10 142 * 1 TIE ROD PIN RIGHT 143 * 1 BUSHING 10 144 * 1 STEERING ROD COMPLETE N 145 1735426SM 1 SNAP PIN 10 146 * 1 SEAL TC254708 152 1735427SM 1 FRONT BEARING COVER 154 * 1 FRONT AXLE SHAFT 155 * 1 RING 47 156 1735428SM 1 RING 24 157 1735429SM 1 BEARING 6005 C3 158 1735430SM 1 BEARING 6004 C3 159 * 1 FINAL FEAR (51T) 160 * 1

Footnotes

Note* See your local authorized Tuff Torq dealership for parts and warranty or visit TuffTorqServices.com.

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

21

TP 400-4805-B-CQ-S

Transaxle SERVICE PARTS - Tuff Torq KXH10NC

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

1733480

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

22

TP 400-4805-B-CQ-S

Transaxle SERVICE PARTS - Tuff Torq KXH10NC

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

WASHER SEAL 6 161 * 1 BOLT 6 x 12 162 * 1 PACKING G140.0 163 1735431SM 1 COLLAR 30*38*4 164 1726183SM 1 RING 30 165 * 1 BOLT 8 x 16 166 * 1 SEAL WASHER 8 167 1724323 1 SEAL KIT 200 * 1

Footnotes

Note* See your local authorized Tuff Torq dealership for parts and warranty or visit TuffTorqServices.com.

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

23

TP 400-4805-B-CQ-S

Controls Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986599

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

24

TP 400-4805-B-CQ-S

Controls Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

ROD, Brake Lock 1 1721353SM 1 KNOB, Push On, Red Plastic "P" 2 1721891SM 1 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 3 1930591SM 1 WASHER, 5/16, Black 4 1919326SM 2 ROD, Brake 5 1721476SM 1 CARRIAGE BOLT, 3/8-16 x 1 3/4 6 1931353SM 2 BUSHING, 5/8 x 3/4 x 3/4, Nylon 7 1663114SM 2 FITTING, Lube, 1/4 8 2821133SM 1 SPRING, Extension 9 1725250SM 1 PIN, Quick 10 1722460SM 3 ARM & HUB ASSEMBLY, Idler 11 1724917SM 1 WASHER, 5/8 12 1960020SM 1 RING, Clipring Extension 13 1704420SM 1 PULLEY, w/Bearing 14 1721134SM 1 WASHER, 3/8 15 1924940SM 1 NUT, Hex Flange ESNA, 3/8-16 16 1960687SM 2 PULLEY, Idler 17 1721133SM 1 BUSHING, 1 x 1-1/8 x 5/8, Nylon 18 1723237SM 2 ARM, Brake 19 1722513SM 1 PEDAL ASSEMBLY, Foot 20 1726763SM 1 CARRIAGE BOLT, 1/4-20 x 1-1/4 21 1931320SM 1 PIN, Cotter, Black 22 1918447SM 1 LATCH, Brake 23 1721354ASM 1 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4 24 1664847SM 3 NUT, Hex Lock ESNA Light, 5/16-18 25 1919438SM 1 WASHER, 5/16, Black 26 1919381SM 1 NUT, Hex Flange Whiz Lock Large, 5/16-18 27 1927557SM 2 PEDAL, Brake 28 1722535ASM 1 PAD, Brake Pedal 29 1721577SM 1 CARRIAGE BOLT, 5/16-18 x 7/8 30 1931334SM 4 CAPSCREW, 5/16-18 x 1 31 1921333SM 2 ACTUATOR, Switch 2.53" Long 32 1722083ASM 1 CAPSCREW, Hex Washer Head Taptite, 3/8-16 x 3/4 33 1923683SM 1 PEDAL, Forward 34 1722070ASM 1 NUT, Hex KEPS, 5/16-18 35 1960636SM 4 PAD, Foot Pedal Forward 36 1721675SM 1 PEDAL, Reverse 37 1722071ASM 1 PAD, Foot Pedal Reverse 38 1721674SM 1 NUT, Hex Lock ESNA Light, 1/4-20 39 1920397SM 1 CAM, Roller 40 1686612SM 1 SPRING, Extension 41 1721995SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

25

TP 400-4805-B-CQ-S

Cruise Control Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985883

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

26

TP 400-4805-B-CQ-S

Cruise Control Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

COVER, w/Cruise Icon 1 1722314SM 1 SCREW, Torque Head Plus Socket Head, 1/4-20 x 7/8 2 1960666SM 1 KNOB, Cruise 3 1722303SM 1 NUT, Hex Lock ESNA Light, 1/4-20 4 1920397SM 1 LEVER & BRACKET ASSEMBLY, Cruise 5 1722003SM 1 WASHER, 3/8, Black 6 1960103SM 2 CARRIAGE BOLT, 5/16-18 x 3/4 7 1931333SM 1 WASHER, 1/2 8 1924361SM 2 SPACER, w/Flange, 11/32 x 15/32 x 3/4 9 1709043SM 1 CARRIAGE BOLT, 5/16-18 x 2-3/4 10 1931342SM 1 CARRIAGE BOLT, 5/16-18 x 2-1/4 11 1960273SM 1 PIN, Quick 12 1722460SM 2 ROD, Cruise 13 1722117SM 1 ROD, Return 14 1733719SM 1 SPRING, Cruise Return to Frame 15 2159106SM 1 NUT, Hex KEPS, 5/16-18 16 1960636SM 2 CAPSCREW, Hex Washer Head Plastite, 10-14 x 5/8 17 1960001SM 2 SWITCH, Push, Neutral Start, Gray 18 1717050SM 1 SPACER, 11/32 x 5/8 x 1-13/32 19 1722080SM 1 WASHER, 5/16, Black 20 1919326SM 1 WASHER, 5/16, Black 21 1919381SM 1 NUT, Hex Lock ESNA Light, 5/16-18 22 1919438SM 1 SPRING, Compression 23 1677746SM 1 PIN, Cotter 24 1918447SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

27

TP 400-4805-B-CQ-S

Electrical Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986605

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

28

TP 400-4805-B-CQ-S

Electrical Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

HEADLIGHT ASSEMBLY, 4 Bulb (Includes Ref. Nos. 2 & 3) 1 1721810SM 1 BULB, Headlight, 12.8V 2 1677371SM 4 SOCKET ASSEMBLY, Headlight, Sealed 3 1723451SM 4 HARNESS, Headlight 4 1722669SM 1 SWITCH, PTO Push/Pull Symbols 5 1722887SM 1 MODULE, RMO (Includes Ref. No. 7) 6 1726556SM 1 KEY, RMO Module Plastic 7 1726557SM 1 CAPSCREW, Hex Washer Head Taptite, 1/4-20 x 1/2, Black 8 1925003SM 2 BREAKER, Circuit, 12 Volt 20 Amps 9 1665238SM 1 WIRE, 12GA 5-15/16 Long, Red 10 1665237SM 1 PLUG, Hole, Square 11 1722611SM 1 PANEL, Instrument w/ Fuel Gage & Hour Meter (Includes Ref. No. 13) 12 1725074SM 1 COVER, Instrument Panel 13 1724865SM 1 NUT, Hex, 5/16-24 14 2820263SM 2 NUT, KEPS Lock 5/16-24 (CE/Export) (Used only on RMO/ACS Models) 14 2860750SM 2 LOCKWASHER, External Tooth, 5/16 15 2820426SM 3 SOLENOID 16 1722739SM 1 SOLENOID (CE/Export) (Used only on RMO/ACS Models) 16 1728963SM 1 SWITCH ASSEMBLY, Ignition, 6 Pin INDAK (Includes Ref. Nos. 18, 19, 20, 21 & 22) 17 1686734SM 1 KEYS, Set of 2 18 1717163SM 1 COVER, For Ignition Switch, Plastic 19 1717550SM 1 NUT, Hex Flange, 5/8-32, Ignition Switch 20 1717549SM 1 LOCKWASHER, Internal Tooth, 5/8, Thin 21 1960547SM 1 WASHER, Shim 22 2101025SM 1 TIE, Strap, 7-5/16 Long 23 1701011SM 3 TIE, Strap, 7-5/16 Long (CE/Export) (Used only on RMO/ACS Models) 23 2825094SM 4 SWITCH, Headlights , 2 Terminal 24 1716951SM 1 BOOT, Insulator Cable Terminal, 1-15/16 Long, Red 25 1713535SM 1 CABLE, #6 x 25" Long, Ring Terminals 26 1721830SM 1 CABLE, #6 x 8" Long, Ring Terminals 27 1603618SM 1 BOOT, Insulator Battery Terminal 28 1677296SM 1 NUT, Hex, 1/4-20 29 2816622SM 3 LOCKWASHER, 1/4 30 2816964SM 2 WASHER, 1/4 31 2821319SM 2 CAPSCREW, Hex Head, 1/4-20 x 3/4 32 2823341SM 2 CABLE, #6 x 26 Long, Ring Terminal 33 1713163SM 1 BATTERY, 12 Volt 34 1685215SM 1 STRAP, Battery, 14 Long, Rubber 35 1722009SM 1 CAPSCREW, Hex Head Taptite, 1/4-20 x 3/8 36 1929000SM 2 BRACKET, Switch Mount 37 1726810ASM 1 SWITCH, Reverse Pedal 38 1732004SM 1 SWITCH, Reverse Pedal (CE/Export) (Used only on RMO/ACS Models) 38 1704379SM 1 SWITCH, Push Button, Foot Pedal 39 1732006SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

29

TP 400-4805-B-CQ-S

Electrical Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986605

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

30

TP 400-4805-B-CQ-S

Electrical Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

49 1734025SM 1

SWITCH, Cruise Control, Grey, NO (Used on all models except CE/Export) 40 1717050SM 1 SCREW, Pan Head Torx, #10-32 x 1/2 41 2860665SM 5 LOCKWASHER, 3/16 #10 42 1917365SM 5 PLUG, Hole 3", Round 43 1722309SM 1 SENDER, Fuel Tank (Includes Ref. 45) 44 1686921SM 1 GASKET 45 1685303SM 1 CAPSCREW, Hex Washer Head Plastite, 1/4 x 1/2 46 1960536SM 2 SWITCH, Seat, Grey, NC 47 1716368SM 1 SWITCH, Seat, Grey, NC (CE/Export) (Used only on RMO/ACS Models) 47 1718981SM 1 HARNESS, Wiring 48 1730192SM 1 HARNESS, Wiring (CE/Export) (Used only on RMO/ACS Models) 48 1733220SM 1 WIRING ASSEMBLY, All Conditions Shutdown (CE/Export) (Used only on RMO/ACS

Models) 12-VOLT OUTLET (CE/Export) (Used only on RMO/ACS Models) 50 1725302SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

31

TP 400-4805-B-CQ-S

Hood, Grille & Dash Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

986608

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

32

TP 400-4805-B-CQ-S

Hood, Grille & Dash Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

PANEL, RH Side 1 1721804CSM 1 PANEL, RH Side, Red 1 1721804DSM 1 HOOD, with Scoop, Red 2 1728031DSM 1 HOOD, with Louvers 3 1722110CSM 1 CAPSCREW, Hex Head Flange Lock,1/4-20 x 5/8 4 1960295SM 12 SCREW, Phillips Head, #10-24 x 1/2 5 1960392SM 1 DASHBOARD, RMO, Black 6 1687054SM 1 DASHBOARD, RMO with Hydra Lift Slot, Black 6 1687055SM 1 NUT, Hex Nylock,#10-24 7 1933896SM 1 ROD, Dash Support 8 1723123SM 1 NUT, Hex Flange Lock, 1/4-20 9 1930641SM 12 PANEL, LH Side 10 1721803CSM 1 PANEL, LH Side, Red 10 1721803DSM 1 HINGE, LH 11 1721808ASM 1 DUCT, Air Inlet 12 1733457ASM 1 GRILLE 13 1721802CSM 1 GRILLE, Red 13 1721802DSM 1 HEADLIGHT ASSEMBLY (Includes Ref. Nos. 15 & 16) 14 1721810SM 1 BULB, Headlight 15 1677371SM 4 SOCKET, Headlight 16 1723451SM 4 HINGE, RH 17 1721809ASM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

33

TP 400-4805-B-CQ-S

Seat & Seat Deck Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985909

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

34

TP 400-4805-B-CQ-S

Seat & Seat Deck Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

BRACKET, 1-5/8 x 1-3/4 1 1722129ASM 1 SEAT, 18" Back 2 1687199SM 1 SUPPORT, Seat 3 1722128ASM 1 CLIP, Wire 4 2172434SM 1 WASHER, Spring, 5/16 x 1-1/4 5 1709256SM 2 SPRING, Compression 6 1714263SM 2 NUT, Hex Lock, ESNA Light, 5/16-18 7 1919438SM 10 SPRING, Compression 8 1717051SM 2 CAPSCREW, Hex Flange Whiz Lock, 5/16-18 x 3/4 9 1930591SM 8 CARRIAGE BOLT, 5/16-18 x 2 10 1931339SM 2 CARRIAGE BOLT, 3/8-16 x 1 11 1931350SM 2 SLIDE, Seat 12 1722356SM 1 NUT, Speed, 5/16-18, Lug Type 13 1935255SM 4 CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 5/8 14 1930601SM 4 PLUG, Plastic 15 1722309SM 2 POD, with Cup Holder, LH 16 1729711SM 1 CAPSCREW, Hex Washer Head, 1/4-20 x 5/8 17 2860664SM 8 NUT, Hex Flange Whiz Lock, 5/16-18 18 1931277SM 4 CAP, Gas 19 1715917SM 1 TUBE & ELBOW ASSEMBLY 20 1722340SM 1 BUSHING, 3/8 x 9/16 x 5/8, Rubber 21 1654930SM 1 TANK, Fuel 22 1722432SM 1 NUT, Hex KEPS, 5/16-18 23 1960636SM 8 DECK, Seat, Orange 24 1722106CSM 1 DECK, Seat, Red 24 1722106DSM 1 POD, RH with 2 Slots 25 1722108SM 1 TUNNEL, Orange 26 1722105CSM 1 TUNNEL, Red 26 1722105DSM 1 SCREW, Hex Flange Whiz Lock, 5/16-18 x 1 27 1960667SM 4 SPACER, 25/64 x 5/8 x 3/16, Hardened 28 1663752SM 2 NUT, Hex Flange Two-Way Lock, 3/8-16 29 1930645SM 2 WASHER, 3/8 30 1924940SM 2 SCREW, Taptite 5/16-18 x 1-1/4 31 1930595SM 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

35

TP 400-4805-B-CQ-S

Lift Group - Manual Lift

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985894

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

36

TP 400-4805-B-CQ-S

Lift Group - Manual Lift

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Whiz Lock Flange, 5/16-18, Large, Black 1 1927557SM 2 CARRIAGE BOLT, 5/16-18 x 3/4 2 1931333SM 4 GRIP, Lift Lever 3 1722291SM 1 BUTTON, Red Nylon, for 1/4 Rod 4 1723124SM 1 NUT, Push 5 1960674SM 1 SPRING, Compression, Lift Lever 6 1723321SM 1 QUADRANT, Lift, Powdered Metal 7 1721581SM 1 CAPSCREW, Hex Head, 5/16-18 x 1, G8, Black 8 1926149SM 2 LEVER ASSEMBLY, Lift 9 1721712ASM 1 NUT, Hex KEPS, 5/16-18 10 1960636SM 5 ROD, Latch 11 1722482SM 1 LOCK, Lift, Powdered Metal 12 1722112SM 1 SPRING, Extension 13 2156302SM 1 SPACER, 1/2 x 3/4 x 23/32 14 1723163SM 1 BAR, Lift, 9-7/8 Long 15 1723795ASM 1 WASHER, 5/16, Black 16 1919381SM 1 CAPSCREW, Hex Head, 5/16-18 x 2-1/4 17 1921160SM 1 PIN, Flat Head Drilled, 1/2 x 2-1/8 Long 18 1722819SM 1 CLIP, Hair Pin, 2-9/16 Long 19 1960033SM 1 SHAFT ASSEMBLY, Lift 20 1727436ASM 1 NUT, Speed, 5/16-18, Lug 21 1935255SM 1 SPRING, Compression 22 1675232SM 1 RETAINER, Spring Flat 23 1723499SM 1 CAPSCREW, Hex Washer Head, 5/16-18 x 4-1/2 24 1722357SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

37

TP 400-4805-B-CQ-S

Wheels & Tires Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

W987669

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

38

TP 400-4805-B-CQ-S

Wheels & Tires Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

WHEEL & TIRE ASSEMBLY (Includes Ref. Nos. 2, 3, 4 & 5) 1 1735010SM 2 TIRE, 16 x 6-1/2-8 2 1735706SM 2 TUBE, Tire 3 2153038SM 2 WHEEL ASSEMBLY 4 1733237SM 2 VALVE STEM & CAP 5 2172353SM 4 WASHER, Flat 3/4 x 1-5/8 x 1/8 6 2860202SM 2 WASHER, Flat 7 1722717ASM 2 WASHER, 3/4 8 1960114SM 2 RING 9 2827794SM 2 CAP, Hub 10 1722676SM 4 WASHER, 1 x 2-1/4 x 1/8 11 1960701SM 4 SPACER 12 1726089SM 2 PLATE & HUB WELDMENT 13 1721400SM 2 WHEEL & TIRE ASSEMBLY (Includes Ref. Nos. 5, 15, 16 & 17) 14 1735011SM 2 TIRE, 23 x 10-1/2-12 15 1735705SM 2 TUBE, Tire 16 2157638SM 2 WHEEL 17 1722831SM 2 NUT, Hex 7/16-20 For Wheel Bolt 18 2177725SM 10 KEY, Hi-Pro 1/4 x 2 19 2105337SM 2 WASHER, Flat 20 1722726ASM 2 WASHER, Flat 21 1919394SM 2 RING 22 2834712SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

39

TP 400-4805-B-CQ-S

Decals Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

D987669

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

40

TP 400-4805-B-CQ-S

Decals Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

DECAL, Simplicity Silver & Blue w/Icon 1 1722551SM 3 DECAL, Conquest, Silver & Blue 2 1722820SM 1 DECAL, 23HP Silver on Clear 3 1722781SM 1 DECAL, Hood Stripe R.H. SMI Blue & Silver 4 1722773SM 1 DECAL, Hood Stripe L.H. SMI Blue & Silver 4 1722774SM 1 DECAL, Ignition Switch Symbols 5 1722806SM 1 DECAL, Tunnel Cover Danger Slopes, Blades 6 1734026SM 1 DECAL, Tunnel Cover Danger Slopes, Blades (CE/Export) 6 1734027SM 1 DECAL, Touch Up Paint 7 1734142SM 1 STICKER, Protection 8 1723296SM 2 DECAL, I.D. Plate 9* 1 DECAL, Patent 10 * 1 DECAL, Transmission Release Valve 11 1723160SM 1 DECAL, Danger Do Not Operate w/o Deflector 13 1704277SM 1 DECAL, Danger Rotating Blade (CE/Export) 13 1720389SM 1 DECAL, OPEI Certified 15 * 1 DECAL, 50" Silver on Black w/Stripe 16 1706640SM 1 DECAL, Danger Do Not Put Hand/Feet In Mower 17 1704276SM 1 DECAL, 1 2 3 4 5 6, Height of Cut White/Black 18 1721197SM 1 DECAL, 4x4 19 1726373SM 2 DECAL, Lift (Used only on Domestic Models) 20 1723143SM 1

Footnotes

NOTE * Not a serviceable part.

The above parts group applies to the following Mfg. Nos.:

1695415 - Conquest 2690679 - Conquest 2690744 - Conquest

2009

41

TP 400-4805-B-CQ-S

44" & 50" Mower Deck - Clutch & Support Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987599

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690679 - Conquest 2690744 - Conquest

2009

42

TP 400-4805-B-CQ-S

44" & 50" Mower Deck - Clutch & Support Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

HITCH & RODS ASSEMBLY, 4WD 1 1737046ASM 1 ROD, Latch 2 1731414SM 1 SPRING PIN 3 2176012SM 1 CAPSCREW, 3/8-16 x 2 4 1923701SM 1 WASHER, 3/8 5 1922755SM 2 NUT, Hex Flange 3/8-16 6 1960687SM 2 WASHER, 3/8 7 1924356SM 2 CAPSCREW, Hex Head 3/8-15 x 3-1/2 G5 8 1923938SM 1 V-BELT, Arbor Drive (Used only on 50" Mower) 9 1703836SM 1 V-BELT, Arbor Drive (Used only on 44" Mower) 9 1721532SM 1 V-BELT, Mower Drive 70.1 (Used only on 50" Mower) 10 1734114SM 1 V-BELT, Mower Drive 62.1 (Used only on 44" Mower) 10 1734115SM 1 PULLEY, Idler 11 1724387SM 2 WASHER, 3/8 12 1924940SM 12 LOCKWASHER, Spring 3/8 13 1916965SM 2 NUT, Hex 3/8-16 14 1916950SM 2 SPRING, Extension 15 1656936SM 1 LEVER ASSEMBLY, Idler w/Bushing & Fitting 16 1718561SM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 17 1931352SM 1 SPACER 18 1674669SM 2 LEVER ASSEMBLY, Idler w/Bushings & Fitting 19 1704658SM 1 NUT, Hex Flange 3/8-16 Machine Lock 20 1960339SM 1 GUARD, Belt 21 1677135ASM 1 CARRIAGE BOLT, 3/8-16 x 2 G5 22 1960315SM 1 SPRING, Extension 23 1715435SM 1 SPACER 24 1737061SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690679 - Conquest 2690744 - Conquest

2009

43

TP 400-4805-B-CQ-S

50" Mower Deck - Height Adjustment & Roller Bar Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987883

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690744 - Conquest

2009

44

TP 400-4805-B-CQ-S

50" Mower Deck - Height Adjustment & Roller Bar Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

BAR, Roller 5/16 1 1704074ASM 1 ROD, Adjusting 2 1722995SM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 3 1931352SM 1 BOLT, Shoulder, 3/8-16 G5 4 2172622SM 1 BRACKET, Height of Cut 16GA 5 1704116ASM 1 CAPSCREW, Hex Head 3/8-16 x 1-3/4 G8 6 1922606SM 1 WASHER, 5/8 7 1924366SM 8 CHAIN, Link 8 1731383ASM 2 CRANK, Height Adjusting 9 1719901SM 1 INDICATOR, Height 10 1720643ASM 1 KNOB, Spinner 11 1714084SM 1 SHAFT ASSEMBLY, Rocker 50" 13 1733522ASM 1 NUT, Hex Flange 1/2-13 Two-Way Lock 14 1930644SM 2 NUT, Hex Flange 5/16-18 Whiz Lock Small 15 1931277SM 2 NUT, Hex 5/8-11 16 1915726SM 2 NUT, Hex Jam 5/16-18 17 1920161SM 2 NUT, Hex Adjusting 18 1704082SM 1 PIN, Round Head Drilled 3/8 x 2 19 2118053SM 1 SCREW, Hex Whiz Lock Flange 5/16-18 x 3/4 20 1930591SM 2 NUT, Push Pal 3/8 Diameter Stud Capped 22 1960093SM 1 NUT, Push for 5/8 Diameter Stud Capped 23 1960520SM 2 SHAFT & BAR ASSEMBLY, Roller 24 1716155ASM 1 ROD, Height Adjust (Short) 25 1737124SM 2 ROD, Height Adjust (Long) 25 7028728SM 2 TRUNNION 26 1731382SM 2 PIN, Spring 27 2816001SM 1 ROLLER 28 1668513SM 8 ROLLER, Rounded 29 1722036SM 2 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 30 1664847SM 6 NUT, Hex Toplock Spiral lock Flange 3/8-16 31 2860681SM 3 SLIDE 32 1677507SM 1 SPACER, 3/8 x 3/4 x 15/16 33 1706644SM 1 SPACER 34 1709195SM 3 STRAP, Roller 35 1665374SM 3 CLIP, Hair Pin 36 1960074SM 3 TRUNNION 37 1733257SM 1 TRUNNION 38 1706645ASM 1 TRUNNION 39 1733258SM 1 WASHER, 3/8 40 1924940SM 3 WASHER, Detent 41 1704097SM 1 WASHER, 1/2 42 1924361SM 1 WASHER, 1/2 43 1960170SM 1 SPACER 45 1716953SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690744 - Conquest

2009

45

TP 400-4805-B-CQ-S

50" Mower Deck - Height Adjustment & Roller Bar Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987642

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

46

TP 400-4805-B-CQ-S

50" Mower Deck - Height Adjustment & Roller Bar Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Toplock Spiralock Flange 3/8-16 1 2860681SM 2 WASHER, 3/8 3 1924940SM 2 ROD, Adjusting 5 1722995SM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 1-1/4 6 1931202SM 2 WASHER, 5/16 7 1919381SM 1 INDICATOR, Cutting Height 8 1704114SM 1 PLATE, Mower Support 9 1704080ASM 1 PIN, Spring 10 2816001SM 1 WASHER, Detent 11 1704097SM 1 TRUNNION, 1-1/4 12 1704086SM 1 WASHER, 1/2 13 1960170SM 1 TRUNNION, 1-1/4 14 1704087SM 1 CRANK, Height Adjusting 15 1719901SM 1 KNOB, Spinner 16 1714084SM 1 NUT, Push Pal 3/8 Diameter Stud Capped 17 1960093SM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 18 1664847SM 6 STRAP 19 1665374SM 3 NUT, Hex 5/8-11 20 1915726SM 2 WASHER, 5/8 21 1924366SM 2 TRUNNION 22 1706645ASM 1 PIN, Round Head Drilled 3/8 x 2 23 2118053SM 1 CLIP, Hair Pin 24 1960074SM 3 CAPSCREW, Hex Head 5/16-18 x 1-1/4 G5 25 1921977SM 2 BRACKET, Height of Cut 16GA 26 1704116ASM 1 NUT, Hex Flange 5/16-18, Whiz Lock Small 28 1931277SM 2 ARM, Rear R.H. 29 1704083ASM 1 SHAFT ASSEMBLY, Rocker 50" 30 1733522ASM 1 CARRIAGE BOLT, 3/8-16 x 1-1/2 G5 31 1931352SM 1 SHAFT & BAR ASSEMBLY, Roller 50" 32 1716155ASM 1 BAR, Roller 33 1704074ASM 1 NUT, Hex Flange 1/2-13 Two-Way Lock 34 1930644SM 2 NUT, Hex Adjusting 35 1704082SM 1 SLIDE 36 1677507SM 1 WASHER, 1/2 37 1924361SM 2 BOLT, Shoulder, 3/8-16 G5 38 2172622SM 1 NUT, Push for 5/8 Diameter Stud Capped 39 1960520SM 2 ROLLER, Rounded 40 1722036SM 2 SPACER 41 1709195SM 3 WASHER, 5/8 42 1924366SM 6 ROLLER 43 1668513SM 8 CHAIN, Link 46 1731383ASM 2 ROD, Height Adjusting 51 1731384SM 2 NUT, Hex Jam 5/16-18 52 1920161SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

47

TP 400-4805-B-CQ-S

50" Mower Deck - Height Adjustment & Roller Bar Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987642

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

48

TP 400-4805-B-CQ-S

50" Mower Deck - Height Adjustment & Roller Bar Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

TRUNNION 53 1731382SM 2 PIN, Yoke 54 1960116SM 1 PIN, Cotter Locking 55 1722320SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

49

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987519

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690744 - Conquest

2009

50

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

HOUSING ASSEMBLY, 50" (Orange) 1 1687325SM 1 HOUSING ASSEMBLY, 50" (Red) 1 1687326SM 1 CAPSCREW, Hex Head 7/16-14 x 1-1/4 G8 2 2823471SM 3 WASHER, Spring 3 1656916SM 3 WASHER, Hex, 11/16 x 2 4 1713089SM 3 BLADE, Mower 50" 5 1708229ASM 3 SHIELD, Grass Lower Arbor Heat Treat 6 1713196SM 3 SHAFT, Arbor 7 1713612SM 1 SHAFT, Arbor 8 1713195SM 2 WASHER, Cup 9 1713619SM 3 HOUSING, Arbor Bottom w/Lube Fitting (Includes Ref. No. 48) 10 1713338ASM 3 BEARING, Ball, 11/16 x 1-9/16 x 15/32 11 1705897SM 3 SPACER, Powdered Metal 12 1732544SM 3 BEARING, Ball 13 2108202SM 3 SPACER, 21/32 x 3/4 x 5/8 14 1715724SM 3 HOUSING, Arbor Top 15 1655729ASM 3 HUB, Powdered Metal 16 1713533SM 1 PULLEY 17 1713098SM 3 HUB, Serated Powdered Metal 18 1713158SM 1 PULLEY 19 1732951SM 1 HUB, Pulley, Center & R.H. 20 1713197SM 2 WASHER, Bellville 21 1713675SM 6 NUT, Hex Flange 9/16-18 22 1714419SM 3 GASKET, Foam Poly 23 1707335SM 3 COVER, Arbor 24 1720560ASM 1 SCREW, Hex Washer Head Taptite 5/16-18 x 3/4 25 1664847SM 27 CARRIAGE BOLT, 1/4-20 x 1-1/4 G5 26 1931320SM 2 NUT, Push for 1/4 Diameter Thread 27 1960518SM 2 ROD, Deflector E-Coat 28 1706709SM 1 WASHER 29 1960353SM 1 SPACER, Powdered Metal 30 1710703SM 2 NUT, Hex Lock ESNA Light 1/4-20 31 1920397SM 2 CLAMP, Wire 32 1704873SM 1 WASHER, 5/16 33 1919326SM 1 SPRING, Torsion Chute 34 7101082SM 1 DEFLECTOR 35 1705449SM 1 COVER, Arbor 36 1715673SM 1 CAP 37 1723323SM 1 PLUG, Button 38 1705115SM 1 BAFFLE, Blowout 50" L.H. (CE/Export) 39 1716870ASM 1 BAFFLE, Blowout 50" R.H. (CE/Export) 40 1735184ASM 1 NUT, Hex Flange 5/16-18 Whiz Lock Large 41 1927557SM 2/11 BOLT, Carriage, 5/16-18 x 3/4 42 1931333SM 2/11

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690744 - Conquest

2009

51

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

987519

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690744 - Conquest

2009

52

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

BAFFLE, Blowout (Domestic) 43 1724538ASM 1 UPSTOP (Only used on Broadmoor Series) 44 1704098SM 1 SPACER (Only used on Broadmoor Series) 45 1611705SM 2 SCREW, Hex Washer Taptite (Only used on Broadmoor Series) 46 1931202SM 2 CARRIAGE BOLT, 1/4-20 x 1-1/2 G5 47 1960633SM 2 FITTING, Grease, 1/4 Drive 48 1704314SM 3

Footnotes

The above parts group applies to the following Mfg. Nos.:

1695395 - 50" Mower 2690744 - Conquest

2009

53

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985972

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

54

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

NUT, Hex Flange, 9/16-18 1 1714419SM 3 WASHER, Bellevilled, 9/16 2 1713675SM 6 PULLEY 3 1713161SM 1 HUB, Double Pulley 4 1713158SM 1 PULLEY 5 1713098SM 3 HUB, Double Pulley 6 1713533SM 1 COVER, Arbor Housing 7 1655729ASM 3 BEARING, Ball, 3/4 x 1-3/4 x 5/8 8 2108202SM 3 SPACER, 21/32 x 3/4 x 5/8 9 1715724SM 3 SPACER, 11/16 x 5/32 x 2-11/16 10 1732544SM 3 BEARING, Ball, 11/16 x 1-9/16 x 15/32 11 1705897SM 3 GASKET, Foam 12 1707335SM 3 HOUSING ASSEMBLY, Arbor Bottom, w/Lube Fitting (Includes Ref. No. 14) 13 1713338ASM 3 FITTING, Grease 14 1704314SM 3 COVER, Arbor 15 1720560ASM 1 CAPSCREW, Hex Head Taptite, 5/16-18 x 3/4 16 1664847SM 26 WASHER, Bellevilled, 9/16, Black 17 1713619SM 3 SHAFT, Arbor (LH) 18 1713612SM 1 SHIELD, Grass, Lower 19 1713196SM 3 BLADE, Mower, 18-1/8 20 1708229ASM 3 WASHER, Hex, 11/16 x 2 21 1713089SM 3 WASHER, Spring 15/32, Black 22 1656916SM 3 CAPSCREW, Hex Head, 7/16-14 x 1 23 2823471SM 3 SHAFT, Arbor (Center & RH) 24 1713195SM 2 MOWER HOUSING ASSEMBLY, 50" Mower (Orange) 25 1685495SM 1 MOWER HOUSING ASSEMBLY, 50" Mower (Red) 25 1687155SM 1 COVER, Arbor 26 1715673SM 1 CARRIAGE BOLT, 1/4-20 x 7/8 27 1931318SM 2 PLUG, Hole 28 1705115SM 1 BAFFLE, Anti-Blowout, LH (CE/Export) 29 1716870ASM 1 CARRIAGE BOLT, 5/16-18 x 3/4 30 1931333SM 2/11 NUT, Hex, Whizlock, 5/16-18 31 1927557SM 2/11 NUT, Push 32 1960518SM 2 WASHER, 1/4, Black 33 1960353SM 2 CLAMP 34 1704873SM 1 WASHER, 5/16, Black 35 1919326SM 1 SPRING 36 7101082SM 1 CAP, Spring End 37 1723323SM 1 NUT, Hex, 1/4-20 ESNA 39 1920397SM 2 ROD, Deflector, Front 40 1706709SM 1 DEFLECTOR, Plastic 41 1705449SM 1 HUB, Pulley, Center & RH 42 1713197SM 2 BAFFLE, Anti-Blowout, RH (CE/Export) 43 1716869ASM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

55

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985972

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

56

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

UPSTOP 45 1719929SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

57

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

985972

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

58

TP 400-4805-B-CQ-S

50" Mower Deck - Housing, Arbors & Blades Group

Not for

Reproduction

PART NO. DESCRIPTIONREF NO QTY.

BAFFLE, Anit-Blowout 44 1724538ASM 1 WASHER 46 1924940SM 2 CAPSCREW, Taptite 5/16-18 x 3/4 47 1664847SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690679 - Conquest

2009

59

TP 400-4805-B-CQ-S

Not for

Reproduction

Not for

Reproduction

Not for

Reproduction

Hardware Identification & Torque Specifications

No

Marks

0

1/4 3/4

1/2

21

1/4 3/4

1/2

1/4 3/4

1/2

1/4 3/4

1/2

4

Not for

Reproduction

Torque Specification Chart

FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)

Property Class

Size Of Hardware

M3 M4 M5 M6 7.3 10.3 12.1 M7 12.1 16.9 19.9 M8 17.7 M10 35 50 M12 61 86.2 103 140 M14 M16 147 210 250 340 M18 202 287 346 470 M20 290 405 486 660 M22 390 559 656 890 M24 497 M27 733 1032 1239 1680 M30 995 1401 1681 2280 M33 M36 1740 2441 M39 2249 3163

The guides and ruler furnished below are designed to help you select the appropriate hardware.

010

Nut, M8

Thread Diameter (mm)

Inside Diameter (in)

Nut, 1/2-16

Class 5.6

in/lbs

ft/lbs

5.88

13.44

26.4

44.64

5.2

7.7 15 26 42 64 89

126 169 217 320

435 590 759 988

20

5.6

Nm. Nm. Nm.

.56

1.28

2.50

4.3

7.1

10.5 21

36 58 88

121 171

230 295 435 590

800 1030 1340

30

8.8

Class 8.8

in/lbs

ft/lbs

13.44 1.80

30.72 43.44 52.56

60.96

Class 10.9

in/lbs

ft/lbs

19.2 22.92

1.28

2.90

5.97 7.15

5.75

9.9

16.5 24 48 83

101

136 162 220

132 200 275 390 530

708

375 995

1350

1349

1902 2278 3090

1830 2360 3050

50

60

Body Length

40

Screw, M8- 1.25 x 25

Thread Diameter (mm)

Threads per inch

Body Diameter

Screw, 1/2- 16 x 2

10.9

4.10

8.10 14 23

25

34

67 117 185 285 390 550 745 960

1400 1900 2580 3310 4290

80

Diameter

Distance between threads (mm)

Threads per inch

3

12.9

Class 12.9

in/lbs

ft/lbs

29 59

840 1140

2935 3980 3798

Body

Nm.

2.15

4.95

9.7

16.5 27 40 81

5150

90 10070

Body Length (mm)

Body Length (in)

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 29 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

b. for flange whizlock nuts and screws - use 135% of

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

Common Hardware Types

Hex Head Capscrew

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

19 20 27 31 66 76

2.1

2.3

3.1

3.5

30 31 43 49

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

in/lbs

3.4

3.5

4.9

5.5

NOTES

torques.

grade 5 torques.

41 43 60 68

Washer

4.6

4.9

6.8

7.7

Standard Hardware Sizing

When a washer or nut is identified as 1/2” (M8), this is

Nominal size

the (8mm metric thread diameter); if a second number is present it represents the

When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the metric thread diameter), the second number,16, represents the

threads per inch, (1.25 thread diameter).

body length of the bolt or screw, 2 inches (50mm).

, meaning the

threads per inch

Nominal size

inside diameter

(distance between threads).

, or body diameter is 1/2 inch (8mm

The final number is the

is 1/2 inch

Carriage Bolt

Wrench & Fastener Size Guide

1/4” Bolt or Nut

Wrench—7/16”

M6 Bolt or Nut

Wrench—10mm

5/16” Bolt or Nut

Wrench—1/2”

M8 Bolt or Nut

Wrench—13mm

3/8” Bolt or Nut

Wrench—9/16”

M10 Bolt or Nut

Wrench—17mm

7/16” Bolt or Nut

Wrench (Bolt)—5/8” Wrench (Nut)—11/16”

M12 Bolt or Nut

Wrench—19mm

Lockwasher

Hex Nut

1/2” Bolt or Nut

Wrench—3/4”

M14 Bolt or Nut

Wrench—22 mm

IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS

Not for

Reproduction

WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO

MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY

OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.

Briggs & Stratton Yard Power Products Group

3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 USA

www.simplicitymfg.com

2009

Simplicity 1695395 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual